busybox/networking/dnsd.c
James Byrne 253c4e787a Optionally re-introduce bb_info_msg()
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was
eliminated and calls to it changed to be bb_error_msg(). The downside of
this is that daemons now log all messages to syslog at the LOG_ERR level
which makes it hard to filter errors from informational messages.

This change optionally re-introduces bb_info_msg(), controlled by a new
option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that
were removed (only in applets that set logmode to LOGMODE_SYSLOG or
LOGMODE_BOTH), and also changes informational messages in ifplugd and
ntpd.

The code size change of this is as follows (using 'defconfig' on x86_64
with gcc 7.3.0-27ubuntu1~18.04)

function                                             old     new   delta
bb_info_msg                                            -     182    +182
bb_vinfo_msg                                           -      27     +27
static.log7                                          194     198      +4
log8                                                 190     191      +1
log5                                                 190     191      +1
crondlog                                              45       -     -45
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45)           Total: 170 bytes

If you don't care about everything being logged at LOG_ERR level
then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller:

function                                             old     new   delta
static.log7                                          194     200      +6
log8                                                 190     193      +3
log5                                                 190     193      +3
syslog_level                                           1       -      -1
bb_verror_msg                                        583     581      -2
crondlog                                              45       -     -45
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48)            Total: -36 bytes

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-04-30 10:51:27 +02:00

569 lines
18 KiB
C

/* vi: set sw=4 ts=4: */
/*
* Mini DNS server implementation for busybox
*
* Copyright (C) 2005 Roberto A. Foglietta (me@roberto.foglietta.name)
* Copyright (C) 2005 Odd Arild Olsen (oao at fibula dot no)
* Copyright (C) 2003 Paul Sheer
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*
* Odd Arild Olsen started out with the sheerdns [1] of Paul Sheer and rewrote
* it into a shape which I believe is both easier to understand and maintain.
* I also reused the input buffer for output and removed services he did not
* need. [1] http://threading.2038bug.com/sheerdns/
*
* Some bugfix and minor changes was applied by Roberto A. Foglietta who made
* the first porting of oao' scdns to busybox also.
*/
//config:config DNSD
//config: bool "dnsd (9.8 kb)"
//config: default y
//config: help
//config: Small and static DNS server daemon.
//applet:IF_DNSD(APPLET(dnsd, BB_DIR_USR_SBIN, BB_SUID_DROP))
//kbuild:lib-$(CONFIG_DNSD) += dnsd.o
//usage:#define dnsd_trivial_usage
//usage: "[-dvs] [-c CONFFILE] [-t TTL_SEC] [-p PORT] [-i ADDR]"
//usage:#define dnsd_full_usage "\n\n"
//usage: "Small static DNS server daemon\n"
//usage: "\n -c FILE Config file"
//usage: "\n -t SEC TTL"
//usage: "\n -p PORT Listen on PORT"
//usage: "\n -i ADDR Listen on ADDR"
//usage: "\n -d Daemonize"
//usage: "\n -v Verbose"
//usage: "\n -s Send successful replies only. Use this if you want"
//usage: "\n to use /etc/resolv.conf with two nameserver lines:"
//usage: "\n nameserver DNSD_SERVER"
//usage: "\n nameserver NORMAL_DNS_SERVER"
#include "libbb.h"
#include <syslog.h>
//#define DEBUG 1
#define DEBUG 0
enum {
/* can tweak this */
DEFAULT_TTL = 120,
/* cannot get bigger packets than 512 per RFC1035. */
MAX_PACK_LEN = 512,
IP_STRING_LEN = sizeof(".xxx.xxx.xxx.xxx"),
MAX_NAME_LEN = IP_STRING_LEN - 1 + sizeof(".in-addr.arpa"),
REQ_A = 1,
REQ_PTR = 12,
};
/* the message from client and first part of response msg */
struct dns_head {
uint16_t id;
uint16_t flags;
uint16_t nquer;
uint16_t nansw;
uint16_t nauth;
uint16_t nadd;
};
/* Structure used to access type and class fields.
* They are totally unaligned, but gcc 4.3.4 thinks that pointer of type uint16_t*
* is 16-bit aligned and replaces 16-bit memcpy (in move_from_unaligned16 macro)
* with aligned halfword access on arm920t!
* Oh well. Slapping PACKED everywhere seems to help: */
struct type_and_class {
uint16_t type PACKED;
uint16_t class PACKED;
} PACKED;
/* element of known name, ip address and reversed ip address */
struct dns_entry {
struct dns_entry *next;
uint32_t ip;
char rip[IP_STRING_LEN]; /* length decimal reversed IP */
char name[1];
};
#define OPT_verbose (option_mask32 & 1)
#define OPT_silent (option_mask32 & 2)
/*
* Insert length of substrings instead of dots
*/
static void undot(char *rip)
{
int i = 0;
int s = 0;
while (rip[i])
i++;
for (--i; i >= 0; i--) {
if (rip[i] == '.') {
rip[i] = s;
s = 0;
} else {
s++;
}
}
}
/*
* Read hostname/IP records from file
*/
static struct dns_entry *parse_conf_file(const char *fileconf)
{
char *token[2];
parser_t *parser;
struct dns_entry *m, *conf_data;
struct dns_entry **nextp;
conf_data = NULL;
nextp = &conf_data;
parser = config_open(fileconf);
while (config_read(parser, token, 2, 2, "# \t", PARSE_NORMAL)) {
struct in_addr ip;
uint32_t v32;
if (inet_aton(token[1], &ip) == 0) {
bb_error_msg("error at line %u, skipping", parser->lineno);
continue;
}
if (OPT_verbose)
bb_info_msg("name:%s, ip:%s", token[0], token[1]);
/* sizeof(*m) includes 1 byte for m->name[0] */
m = xzalloc(sizeof(*m) + strlen(token[0]) + 1);
/*m->next = NULL;*/
*nextp = m;
nextp = &m->next;
m->name[0] = '.';
strcpy(m->name + 1, token[0]);
undot(m->name);
m->ip = ip.s_addr; /* in network order */
v32 = ntohl(m->ip);
/* inverted order */
sprintf(m->rip, ".%u.%u.%u.%u",
(uint8_t)(v32),
(uint8_t)(v32 >> 8),
(uint8_t)(v32 >> 16),
(v32 >> 24)
);
undot(m->rip);
}
config_close(parser);
return conf_data;
}
/*
* Look query up in dns records and return answer if found.
*/
static char *table_lookup(struct dns_entry *d,
uint16_t type,
char* query_string)
{
while (d) {
unsigned len = d->name[0];
/* d->name[len] is the last (non NUL) char */
#if DEBUG
char *p, *q;
q = query_string + 1;
p = d->name + 1;
fprintf(stderr, "%d/%d p:%s q:%s %d\n",
(int)strlen(p), len,
p, q, (int)strlen(q)
);
#endif
if (type == htons(REQ_A)) {
/* search by host name */
if (len != 1 || d->name[1] != '*') {
/* we are lax, hope no name component is ever >64 so that length
* (which will be represented as 'A','B'...) matches a lowercase letter.
* Actually, I think false matches are hard to construct.
* Example.
* [31] len is represented as '1', [65] as 'A', [65+32] as 'a'.
* [65] <65 same chars>[31]<31 same chars>NUL
* [65+32]<65 same chars>1 <31 same chars>NUL
* This example seems to be the minimal case when false match occurs.
*/
if (strcasecmp(d->name, query_string) != 0)
goto next;
}
return (char *)&d->ip;
#if DEBUG
fprintf(stderr, "Found IP:%x\n", (int)d->ip);
#endif
return 0;
}
/* search by IP-address */
if ((len != 1 || d->name[1] != '*')
/* we assume (do not check) that query_string
* ends in ".in-addr.arpa" */
&& is_prefixed_with(query_string, d->rip)
) {
#if DEBUG
fprintf(stderr, "Found name:%s\n", d->name);
#endif
return d->name;
}
next:
d = d->next;
}
return NULL;
}
/*
* Decode message and generate answer
*/
/* RFC 1035
...
Whenever an octet represents a numeric quantity, the left most bit
in the diagram is the high order or most significant bit.
That is, the bit labeled 0 is the most significant bit.
...
4.1.1. Header section format
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| ID |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
|QR| OPCODE |AA|TC|RD|RA| 0 0 0| RCODE |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| QDCOUNT |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| ANCOUNT |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| NSCOUNT |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| ARCOUNT |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
ID 16 bit random identifier assigned by querying peer.
Used to match query/response.
QR message is a query (0), or a response (1).
OPCODE 0 standard query (QUERY)
1 inverse query (IQUERY)
2 server status request (STATUS)
AA Authoritative Answer - this bit is valid in responses.
Responding name server is an authority for the domain name
in question section. Answer section may have multiple owner names
because of aliases. The AA bit corresponds to the name which matches
the query name, or the first owner name in the answer section.
TC TrunCation - this message was truncated.
RD Recursion Desired - this bit may be set in a query and
is copied into the response. If RD is set, it directs
the name server to pursue the query recursively.
Recursive query support is optional.
RA Recursion Available - this be is set or cleared in a
response, and denotes whether recursive query support is
available in the name server.
RCODE Response code.
0 No error condition
1 Format error
2 Server failure - server was unable to process the query
due to a problem with the name server.
3 Name Error - meaningful only for responses from
an authoritative name server. The referenced domain name
does not exist.
4 Not Implemented.
5 Refused.
QDCOUNT number of entries in the question section.
ANCOUNT number of records in the answer section.
NSCOUNT number of records in the authority records section.
ARCOUNT number of records in the additional records section.
4.1.2. Question section format
The section contains QDCOUNT (usually 1) entries, each of this format:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
/ QNAME /
/ /
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| QTYPE |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| QCLASS |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
QNAME a domain name represented as a sequence of labels, where
each label consists of a length octet followed by that
number of octets. The domain name terminates with the
zero length octet for the null label of the root. Note
that this field may be an odd number of octets; no
padding is used.
QTYPE a two octet type of the query.
1 a host address [REQ_A const]
2 an authoritative name server
3 a mail destination (Obsolete - use MX)
4 a mail forwarder (Obsolete - use MX)
5 the canonical name for an alias
6 marks the start of a zone of authority
7 a mailbox domain name (EXPERIMENTAL)
8 a mail group member (EXPERIMENTAL)
9 a mail rename domain name (EXPERIMENTAL)
10 a null RR (EXPERIMENTAL)
11 a well known service description
12 a domain name pointer [REQ_PTR const]
13 host information
14 mailbox or mail list information
15 mail exchange
16 text strings
0x1c IPv6?
252 a request for a transfer of an entire zone
253 a request for mailbox-related records (MB, MG or MR)
254 a request for mail agent RRs (Obsolete - see MX)
255 a request for all records
QCLASS a two octet code that specifies the class of the query.
1 the Internet
(others are historic only)
255 any class
4.1.3. Resource Record format
The answer, authority, and additional sections all share the same format:
a variable number of resource records, where the number of records
is specified in the corresponding count field in the header.
Each resource record has this format:
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
/ /
/ NAME /
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| TYPE |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| CLASS |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| TTL |
| |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| RDLENGTH |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--|
/ RDATA /
/ /
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
NAME a domain name to which this resource record pertains.
TYPE two octets containing one of the RR type codes. This
field specifies the meaning of the data in the RDATA field.
CLASS two octets which specify the class of the data in the RDATA field.
TTL a 32 bit unsigned integer that specifies the time interval
(in seconds) that the record may be cached.
RDLENGTH a 16 bit integer, length in octets of the RDATA field.
RDATA a variable length string of octets that describes the resource.
The format of this information varies according to the TYPE
and CLASS of the resource record.
If the TYPE is A and the CLASS is IN, it's a 4 octet IP address.
4.1.4. Message compression
In order to reduce the size of messages, domain names coan be compressed.
An entire domain name or a list of labels at the end of a domain name
is replaced with a pointer to a prior occurrence of the same name.
The pointer takes the form of a two octet sequence:
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
| 1 1| OFFSET |
+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+
The first two bits are ones. This allows a pointer to be distinguished
from a label, since the label must begin with two zero bits because
labels are restricted to 63 octets or less. The OFFSET field specifies
an offset from the start of the message (i.e., the first octet
of the ID field in the domain header).
A zero offset specifies the first byte of the ID field, etc.
Domain name in a message can be represented as either:
- a sequence of labels ending in a zero octet
- a pointer
- a sequence of labels ending with a pointer
*/
static int process_packet(struct dns_entry *conf_data,
uint32_t conf_ttl,
uint8_t *buf)
{
struct dns_head *head;
struct type_and_class *unaligned_type_class;
const char *err_msg;
char *query_string;
char *answstr;
uint8_t *answb;
uint16_t outr_rlen;
uint16_t outr_flags;
uint16_t type;
uint16_t class;
int query_len;
head = (struct dns_head *)buf;
if (head->nquer == 0) {
bb_error_msg("packet has 0 queries, ignored");
return 0; /* don't reply */
}
if (head->flags & htons(0x8000)) { /* QR bit */
bb_error_msg("response packet, ignored");
return 0; /* don't reply */
}
/* QR = 1 "response", RCODE = 4 "Not Implemented" */
outr_flags = htons(0x8000 | 4);
err_msg = NULL;
/* start of query string */
query_string = (void *)(head + 1);
/* caller guarantees strlen is <= MAX_PACK_LEN */
query_len = strlen(query_string) + 1;
/* may be unaligned! */
unaligned_type_class = (void *)(query_string + query_len);
query_len += sizeof(*unaligned_type_class);
/* where to append answer block */
answb = (void *)(unaligned_type_class + 1);
/* OPCODE != 0 "standard query"? */
if ((head->flags & htons(0x7800)) != 0) {
err_msg = "opcode != 0";
goto empty_packet;
}
move_from_unaligned16(class, &unaligned_type_class->class);
if (class != htons(1)) { /* not class INET? */
err_msg = "class != 1";
goto empty_packet;
}
move_from_unaligned16(type, &unaligned_type_class->type);
if (type != htons(REQ_A) && type != htons(REQ_PTR)) {
/* we can't handle this query type */
//TODO: happens all the time with REQ_AAAA (0x1c) requests - implement those?
err_msg = "type is !REQ_A and !REQ_PTR";
goto empty_packet;
}
/* look up the name */
answstr = table_lookup(conf_data, type, query_string);
#if DEBUG
/* Shows lengths instead of dots, unusable for !DEBUG */
bb_info_msg("'%s'->'%s'", query_string, answstr);
#endif
outr_rlen = 4;
if (answstr && type == htons(REQ_PTR)) {
/* returning a host name */
outr_rlen = strlen(answstr) + 1;
}
if (!answstr
|| (unsigned)(answb - buf) + query_len + 4 + 2 + outr_rlen > MAX_PACK_LEN
) {
/* QR = 1 "response"
* AA = 1 "Authoritative Answer"
* RCODE = 3 "Name Error" */
err_msg = "name is not found";
outr_flags = htons(0x8000 | 0x0400 | 3);
goto empty_packet;
}
/* Append answer Resource Record */
memcpy(answb, query_string, query_len); /* name, type, class */
answb += query_len;
move_to_unaligned32((uint32_t *)answb, htonl(conf_ttl));
answb += 4;
move_to_unaligned16((uint16_t *)answb, htons(outr_rlen));
answb += 2;
memcpy(answb, answstr, outr_rlen);
answb += outr_rlen;
/* QR = 1 "response",
* AA = 1 "Authoritative Answer",
* TODO: need to set RA bit 0x80? One user says nslookup complains
* "Got recursion not available from SERVER, trying next server"
* "** server can't find HOSTNAME"
* RCODE = 0 "success"
*/
if (OPT_verbose)
bb_info_msg("returning positive reply");
outr_flags = htons(0x8000 | 0x0400 | 0);
/* we have one answer */
head->nansw = htons(1);
empty_packet:
if ((outr_flags & htons(0xf)) != 0) { /* not a positive response */
if (OPT_verbose) {
bb_error_msg("%s, %s",
err_msg,
OPT_silent ? "dropping query" : "sending error reply"
);
}
if (OPT_silent)
return 0;
}
head->flags |= outr_flags;
head->nauth = head->nadd = 0;
head->nquer = htons(1); // why???
return answb - buf;
}
int dnsd_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int dnsd_main(int argc UNUSED_PARAM, char **argv)
{
const char *listen_interface = "0.0.0.0";
const char *fileconf = "/etc/dnsd.conf";
struct dns_entry *conf_data;
uint32_t conf_ttl = DEFAULT_TTL;
char *sttl, *sport;
len_and_sockaddr *lsa, *from, *to;
unsigned lsa_size;
int udps, opts;
uint16_t port = 53;
/* Ensure buf is 32bit aligned (we need 16bit, but 32bit can't hurt) */
uint8_t buf[MAX_PACK_LEN + 1] ALIGN4;
opts = getopt32(argv, "vsi:c:t:p:d", &listen_interface, &fileconf, &sttl, &sport);
//if (opts & (1 << 0)) // -v
//if (opts & (1 << 1)) // -s
//if (opts & (1 << 2)) // -i
//if (opts & (1 << 3)) // -c
if (opts & (1 << 4)) // -t
conf_ttl = xatou_range(sttl, 1, 0xffffffff);
if (opts & (1 << 5)) // -p
port = xatou_range(sport, 1, 0xffff);
if (opts & (1 << 6)) { // -d
bb_daemonize_or_rexec(DAEMON_CLOSE_EXTRA_FDS, argv);
openlog(applet_name, LOG_PID, LOG_DAEMON);
logmode = LOGMODE_SYSLOG;
}
conf_data = parse_conf_file(fileconf);
lsa = xdotted2sockaddr(listen_interface, port);
udps = xsocket(lsa->u.sa.sa_family, SOCK_DGRAM, 0);
xbind(udps, &lsa->u.sa, lsa->len);
socket_want_pktinfo(udps); /* needed for recv_from_to to work */
lsa_size = LSA_LEN_SIZE + lsa->len;
from = xzalloc(lsa_size);
to = xzalloc(lsa_size);
{
char *p = xmalloc_sockaddr2dotted(&lsa->u.sa);
bb_info_msg("accepting UDP packets on %s", p);
free(p);
}
while (1) {
int r;
/* Try to get *DEST* address (to which of our addresses
* this query was directed), and reply from the same address.
* Or else we can exhibit usual UDP ugliness:
* [ip1.multihomed.ip2] <= query to ip1 <= peer
* [ip1.multihomed.ip2] => reply from ip2 => peer (confused) */
memcpy(to, lsa, lsa_size);
r = recv_from_to(udps, buf, MAX_PACK_LEN + 1, 0, &from->u.sa, &to->u.sa, lsa->len);
if (r < 12 || r > MAX_PACK_LEN) {
bb_error_msg("packet size %d, ignored", r);
continue;
}
if (OPT_verbose)
bb_info_msg("got UDP packet");
buf[r] = '\0'; /* paranoia */
r = process_packet(conf_data, conf_ttl, buf);
if (r <= 0)
continue;
send_to_from(udps, buf, r, 0, &from->u.sa, &to->u.sa, lsa->len);
}
return 0;
}