busybox/archival/libunarchive/unxz/xz.h
Denys Vlasenko 716f3f612e decompress_unxz: newer version, one which can unpack SHA-256 protected files
function                                             old     new   delta
check_sizes                                            -      16     +16
crc32_table                                            -       4      +4
index_update                                          47      40      -7
crc32_validate                                       110      93     -17
dec_vli                                              197     165     -32
unpack_xz_stream                                    4284    4014    -270
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 0/4 up/down: 20/-326)          Total: -306 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2010-06-01 14:41:39 +02:00

223 lines
8.6 KiB
C

/*
* XZ decompressor
*
* Authors: Lasse Collin <lasse.collin@tukaani.org>
* Igor Pavlov <http://7-zip.org/>
*
* This file has been put into the public domain.
* You can do whatever you want with this file.
*/
#ifndef XZ_H
#define XZ_H
#ifdef __KERNEL__
# include <linux/stddef.h>
# include <linux/types.h>
#else
# include <stddef.h>
# include <stdint.h>
#endif
/* In Linux, this is used to make extern functions static when needed. */
#ifndef XZ_EXTERN
# define XZ_EXTERN extern
#endif
/* In Linux, this is used to mark the functions with __init when needed. */
#ifndef XZ_FUNC
# define XZ_FUNC
#endif
/**
* enum xz_ret - Return codes
* @XZ_OK: Everything is OK so far. More input or more
* output space is required to continue.
* @XZ_STREAM_END: Operation finished successfully.
* @XZ_UNSUPPORTED_CHECK: Integrity check type is not supported. Decoding
* is still possible in multi-call mode by simply
* calling xz_dec_run() again.
* NOTE: This return value is used only if
* XZ_DEC_ANY_CHECK was defined at build time,
* which is not used in the kernel. Unsupported
* check types return XZ_OPTIONS_ERROR if
* XZ_DEC_ANY_CHECK was not defined at build time.
* @XZ_MEMLIMIT_ERROR: Not enough memory was preallocated at decoder
* initialization time.
* @XZ_FORMAT_ERROR: File format was not recognized (wrong magic
* bytes).
* @XZ_OPTIONS_ERROR: This implementation doesn't support the requested
* compression options. In the decoder this means
* that the header CRC32 matches, but the header
* itself specifies something that we don't support.
* @XZ_DATA_ERROR: Compressed data is corrupt.
* @XZ_BUF_ERROR: Cannot make any progress. Details are slightly
* different between multi-call and single-call
* mode; more information below.
*
* In multi-call mode, XZ_BUF_ERROR is returned when two consecutive calls
* to XZ code cannot consume any input and cannot produce any new output.
* This happens when there is no new input available, or the output buffer
* is full while at least one output byte is still pending. Assuming your
* code is not buggy, you can get this error only when decoding a compressed
* stream that is truncated or otherwise corrupt.
*
* In single-call mode, XZ_BUF_ERROR is returned only when the output buffer
* is too small, or the compressed input is corrupt in a way that makes the
* decoder produce more output than the caller expected. When it is
* (relatively) clear that the compressed input is truncated, XZ_DATA_ERROR
* is used instead of XZ_BUF_ERROR.
*/
enum xz_ret {
XZ_OK,
XZ_STREAM_END,
XZ_UNSUPPORTED_CHECK,
XZ_MEMLIMIT_ERROR,
XZ_FORMAT_ERROR,
XZ_OPTIONS_ERROR,
XZ_DATA_ERROR,
XZ_BUF_ERROR
};
/**
* struct xz_buf - Passing input and output buffers to XZ code
* @in: Beginning of the input buffer. This may be NULL if and only
* if in_pos is equal to in_size.
* @in_pos: Current position in the input buffer. This must not exceed
* in_size.
* @in_size: Size of the input buffer
* @out: Beginning of the output buffer. This may be NULL if and only
* if out_pos is equal to out_size.
* @out_pos: Current position in the output buffer. This must not exceed
* out_size.
* @out_size: Size of the output buffer
*
* Only the contents of the output buffer from out[out_pos] onward, and
* the variables in_pos and out_pos are modified by the XZ code.
*/
struct xz_buf {
const uint8_t *in;
size_t in_pos;
size_t in_size;
uint8_t *out;
size_t out_pos;
size_t out_size;
};
/**
* struct xz_dec - Opaque type to hold the XZ decoder state
*/
struct xz_dec;
/**
* xz_dec_init() - Allocate and initialize a XZ decoder state
* @dict_max: Maximum size of the LZMA2 dictionary (history buffer) for
* multi-call decoding, or special value of zero to indicate
* single-call decoding mode.
*
* If dict_max > 0, the decoder is initialized to work in multi-call mode.
* dict_max number of bytes of memory is preallocated for the LZMA2
* dictionary. This way there is no risk that xz_dec_run() could run out
* of memory, since xz_dec_run() will never allocate any memory. Instead,
* if the preallocated dictionary is too small for decoding the given input
* stream, xz_dec_run() will return XZ_MEMLIMIT_ERROR. Thus, it is important
* to know what kind of data will be decoded to avoid allocating excessive
* amount of memory for the dictionary.
*
* LZMA2 dictionary is always 2^n bytes or 2^n + 2^(n-1) bytes (the latter
* sizes are less common in practice). In the kernel, dictionary sizes of
* 64 KiB, 128 KiB, 256 KiB, 512 KiB, and 1 MiB are probably the only
* reasonable values.
*
* If dict_max == 0, the decoder is initialized to work in single-call mode.
* In single-call mode, xz_dec_run() decodes the whole stream at once. The
* caller must provide enough output space or the decoding will fail. The
* output space is used as the dictionary buffer, which is why there is
* no need to allocate the dictionary as part of the decoder's internal
* state.
*
* Because the output buffer is used as the workspace, streams encoded using
* a big dictionary are not a problem in single-call. It is enough that the
* output buffer is big enough to hold the actual uncompressed data; it
* can be smaller than the dictionary size stored in the stream headers.
*
* On success, xz_dec_init() returns a pointer to struct xz_dec, which is
* ready to be used with xz_dec_run(). On error, xz_dec_init() returns NULL.
*/
XZ_EXTERN struct xz_dec * XZ_FUNC xz_dec_init(uint32_t dict_max);
/**
* xz_dec_run() - Run the XZ decoder
* @s: Decoder state allocated using xz_dec_init()
* @b: Input and output buffers
*
* In multi-call mode, this function may return any of the values listed in
* enum xz_ret.
*
* In single-call mode, this function never returns XZ_OK. If an error occurs
* in single-call mode (return value is not XZ_STREAM_END), b->in_pos and
* b->out_pos are not modified, and the contents of the output buffer from
* b->out[b->out_pos] onward are undefined.
*
* NOTE: In single-call mode, the contents of the output buffer are undefined
* also after XZ_BUF_ERROR. This is because with some filter chains, there
* may be a second pass over the output buffer, and this pass cannot be
* properly done if the output buffer is truncated. Thus, you cannot give
* the single-call decoder a too small buffer and then expect to get that
* amount valid data from the beginning of the stream. You must use the
* multi-call decoder if you don't want to uncompress the whole stream.
*/
XZ_EXTERN enum xz_ret XZ_FUNC xz_dec_run(struct xz_dec *s, struct xz_buf *b);
/**
* xz_dec_reset() - Reset an already allocated decoder state
* @s: Decoder state allocated using xz_dec_init()
*
* This function can be used to reset the multi-call decoder state without
* freeing and reallocating memory with xz_dec_end() and xz_dec_init().
*
* In single-call mode, xz_dec_reset() is always called in the beginning of
* xz_dec_run(). Thus, explicit call to xz_dec_reset() is useful only in
* multi-call mode.
*/
XZ_EXTERN void XZ_FUNC xz_dec_reset(struct xz_dec *s);
/**
* xz_dec_end() - Free the memory allocated for the decoder state
* @s: Decoder state allocated using xz_dec_init(). If s is NULL,
* this function does nothing.
*/
XZ_EXTERN void XZ_FUNC xz_dec_end(struct xz_dec *s);
/*
* Standalone build (userspace build or in-kernel build for boot time use)
* needs a CRC32 implementation. For normal in-kernel use, kernel's own
* CRC32 module is used instead, and users of this module don't need to
* care about the functions below.
*/
#ifndef XZ_INTERNAL_CRC32
# ifdef __KERNEL__
# define XZ_INTERNAL_CRC32 0
# else
# define XZ_INTERNAL_CRC32 1
# endif
#endif
#if XZ_INTERNAL_CRC32
/*
* This must be called before any other xz_* function to initialize
* the CRC32 lookup table.
*/
XZ_EXTERN void XZ_FUNC xz_crc32_init(void);
/*
* Update CRC32 value using the polynomial from IEEE-802.3. To start a new
* calculation, the third argument must be zero. To continue the calculation,
* the previously returned value is passed as the third argument.
*/
XZ_EXTERN uint32_t XZ_FUNC xz_crc32(
const uint8_t *buf, size_t size, uint32_t crc);
#endif
#endif