busybox/libbb/uuencode.c
James Byrne 6937487be7 libbb: reduce the overhead of single parameter bb_error_msg() calls
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().

This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.

Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.

This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.

The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):

Arm:     -92 bytes
MIPS:    -52 bytes
PPC:   -1836 bytes
x86_64: -938 bytes

Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 11:35:03 +02:00

224 lines
5.8 KiB
C

/* vi: set sw=4 ts=4: */
/*
* Copyright 2003, Glenn McGrath
* Copyright 2006, Rob Landley <rob@landley.net>
* Copyright 2010, Denys Vlasenko
*
* Licensed under GPLv2 or later, see file LICENSE in this source tree.
*/
#include "libbb.h"
/* Conversion table. for base 64 */
const char bb_uuenc_tbl_base64[65 + 1] ALIGN1 = {
'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H',
'I', 'J', 'K', 'L', 'M', 'N', 'O', 'P',
'Q', 'R', 'S', 'T', 'U', 'V', 'W', 'X',
'Y', 'Z', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n',
'o', 'p', 'q', 'r', 's', 't', 'u', 'v',
'w', 'x', 'y', 'z', '0', '1', '2', '3',
'4', '5', '6', '7', '8', '9', '+', '/',
'=' /* termination character */,
'\0' /* needed for uudecode.c only */
};
const char bb_uuenc_tbl_std[65] ALIGN1 = {
'`', '!', '"', '#', '$', '%', '&', '\'',
'(', ')', '*', '+', ',', '-', '.', '/',
'0', '1', '2', '3', '4', '5', '6', '7',
'8', '9', ':', ';', '<', '=', '>', '?',
'@', 'A', 'B', 'C', 'D', 'E', 'F', 'G',
'H', 'I', 'J', 'K', 'L', 'M', 'N', 'O',
'P', 'Q', 'R', 'S', 'T', 'U', 'V', 'W',
'X', 'Y', 'Z', '[', '\\', ']', '^', '_',
'`' /* termination character */
};
/*
* Encode bytes at S of length LENGTH to uuencode or base64 format and place it
* to STORE. STORE will be 0-terminated, and must point to a writable
* buffer of at least 1+BASE64_LENGTH(length) bytes.
* where BASE64_LENGTH(len) = (4 * ((LENGTH + 2) / 3))
*/
void FAST_FUNC bb_uuencode(char *p, const void *src, int length, const char *tbl)
{
const unsigned char *s = src;
/* Transform the 3x8 bits to 4x6 bits */
while (length > 0) {
unsigned s1, s2;
/* Are s[1], s[2] valid or should be assumed 0? */
s1 = s2 = 0;
length -= 3; /* can be >=0, -1, -2 */
if (length >= -1) {
s1 = s[1];
if (length >= 0)
s2 = s[2];
}
*p++ = tbl[s[0] >> 2];
*p++ = tbl[((s[0] & 3) << 4) + (s1 >> 4)];
*p++ = tbl[((s1 & 0xf) << 2) + (s2 >> 6)];
*p++ = tbl[s2 & 0x3f];
s += 3;
}
/* Zero-terminate */
*p = '\0';
/* If length is -2 or -1, pad last char or two */
while (length) {
*--p = tbl[64];
length++;
}
}
/*
* Decode base64 encoded string. Stops on '\0'.
*
* Returns: pointer to the undecoded part of source.
* If points to '\0', then the source was fully decoded.
* (*pp_dst): advanced past the last written byte.
*/
const char* FAST_FUNC decode_base64(char **pp_dst, const char *src)
{
char *dst = *pp_dst;
const char *src_tail;
while (1) {
unsigned char six_bit[4];
int count = 0;
/* Fetch up to four 6-bit values */
src_tail = src;
while (count < 4) {
char *table_ptr;
int ch;
/* Get next _valid_ character.
* bb_uuenc_tbl_base64[] contains this string:
* 0 1 2 3 4 5 6
* 01234567890123456789012345678901234567890123456789012345678901234
* "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789+/="
*/
do {
ch = *src;
if (ch == '\0') {
if (count == 0) {
/* Example:
* If we decode "QUJD <NUL>", we want
* to return ptr to NUL, not to ' ',
* because we did fully decode
* the string (to "ABC").
*/
src_tail = src;
}
goto ret;
}
src++;
table_ptr = strchr(bb_uuenc_tbl_base64, ch);
//TODO: add BASE64_FLAG_foo to die on bad char?
} while (!table_ptr);
/* Convert encoded character to decimal */
ch = table_ptr - bb_uuenc_tbl_base64;
/* ch is 64 if char was '=', otherwise 0..63 */
if (ch == 64)
break;
six_bit[count] = ch;
count++;
}
/* Transform 6-bit values to 8-bit ones.
* count can be < 4 when we decode the tail:
* "eQ==" -> "y", not "y NUL NUL".
* Note that (count > 1) is always true,
* "x===" encoding is not valid:
* even a single zero byte encodes as "AA==".
* However, with current logic we come here with count == 1
* when we decode "==" tail.
*/
if (count > 1)
*dst++ = six_bit[0] << 2 | six_bit[1] >> 4;
if (count > 2)
*dst++ = six_bit[1] << 4 | six_bit[2] >> 2;
if (count > 3)
*dst++ = six_bit[2] << 6 | six_bit[3];
/* Note that if we decode "AA==" and ate first '=',
* we just decoded one char (count == 2) and now we'll
* do the loop once more to decode second '='.
*/
} /* while (1) */
ret:
*pp_dst = dst;
return src_tail;
}
/*
* Decode base64 encoded stream.
* Can stop on EOF, specified char, or on uuencode-style "====" line:
* flags argument controls it.
*/
void FAST_FUNC read_base64(FILE *src_stream, FILE *dst_stream, int flags)
{
/* Note that EOF _can_ be passed as exit_char too */
#define exit_char ((int)(signed char)flags)
#define uu_style_end (flags & BASE64_FLAG_UU_STOP)
/* uuencoded files have 61 byte lines. Use 64 byte buffer
* to process line at a time.
*/
enum { BUFFER_SIZE = 64 };
char in_buf[BUFFER_SIZE + 2];
char out_buf[BUFFER_SIZE / 4 * 3 + 2];
char *out_tail;
const char *in_tail;
int term_seen = 0;
int in_count = 0;
while (1) {
while (in_count < BUFFER_SIZE) {
int ch = fgetc(src_stream);
if (ch == exit_char) {
if (in_count == 0)
return;
term_seen = 1;
break;
}
if (ch == EOF) {
term_seen = 1;
break;
}
/* Prevent "====" line to be split: stop if we see '\n'.
* We can also skip other whitespace and skirt the problem
* of files with NULs by stopping on any control char or space:
*/
if (ch <= ' ')
break;
in_buf[in_count++] = ch;
}
in_buf[in_count] = '\0';
/* Did we encounter "====" line? */
if (uu_style_end && strcmp(in_buf, "====") == 0)
return;
out_tail = out_buf;
in_tail = decode_base64(&out_tail, in_buf);
fwrite(out_buf, (out_tail - out_buf), 1, dst_stream);
if (term_seen) {
/* Did we consume ALL characters? */
if (*in_tail == '\0')
return;
/* No */
bb_simple_error_msg_and_die("truncated base64 input");
}
/* It was partial decode */
in_count = strlen(in_tail);
memmove(in_buf, in_tail, in_count);
}
}