busybox/loginutils/getty.c
Denis Vlasenko fb79a2e2cf xioctl and friends by Tito <farmatito@tiscali.it>
function                                             old     new   delta
do_iptunnel                                          203     977    +774
process_dev                                         5328    5494    +166
ioctl_or_perror                                        -      54     +54
ioctl_or_perror_and_die                                -      51     +51
ioctl_alt_func                                         -      49     +49
bb_ioctl_or_warn                                       -      47     +47
do_add_ioctl                                         102     145     +43
bb_xioctl                                              -      39     +39
print_value_on_off                                     -      31     +31
get_lcm                                              105     123     +18
arp_main                                            2155    2167     +12
..................
zcip_main                                           1576    1566     -10
setlogcons_main                                       92      82     -10
dumpkmap_main                                        263     253     -10
do_get_ioctl                                          85      75     -10
setkeycodes_main                                     165     154     -11
write_table                                          244     232     -12
vconfig_main                                         318     306     -12
do_del_ioctl                                          93      81     -12
set_address                                           75      62     -13
maybe_set_utc                                         30      16     -14
loadfont_main                                        495     479     -16
slattach_main                                        712     695     -17
do_loadfont                                          191     174     -17
do_iplink                                           1155    1136     -19
getty_main                                          2583    2562     -21
fbset_main                                          2058    2035     -23
do_time                                              588     565     -23
xioctl                                                25       -     -25
read_rtc                                             186     160     -26
parse_conf                                          1299    1270     -29
udhcp_read_interface                                 269     239     -30
bb_ioctl                                              45       -     -45
bb_ioctl_alt                                          70       -     -70
bb_ioctl_on_off                                       78       -     -78
.rodata                                           129370  129018    -352
do_show                                              799       -    -799
------------------------------------------------------------------------------
(add/remove: 6/5 grow/shrink: 13/49 up/down: 1316/-1864)     Total: -548 bytes
   text	   data	    bss	    dec	    hex	filename
 675352	   2740	  13968	 692060	  a8f5c	busybox_old
 674804	   2740	  13968	 691512	  a8d38	busybox_unstripped
2007-07-14 22:07:14 +00:00

855 lines
23 KiB
C

/* vi: set sw=4 ts=4: */
/* agetty.c - another getty program for Linux. By W. Z. Venema 1989
* Ported to Linux by Peter Orbaek <poe@daimi.aau.dk>
* This program is freely distributable. The entire man-page used to
* be here. Now read the real man-page agetty.8 instead.
*
* option added by Eric Rasmussen <ear@usfirst.org> - 12/28/95
*
* 1999-02-22 Arkadiusz Mi¶kiewicz <misiek@misiek.eu.org>
* - added Native Language Support
* 1999-05-05 Thorsten Kranzkowski <dl8bcu@gmx.net>
* - enable hardware flow control before displaying /etc/issue
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*
*/
#include "libbb.h"
#include <syslog.h>
#if ENABLE_FEATURE_UTMP
#include <utmp.h>
#endif
/*
* Some heuristics to find out what environment we are in: if it is not
* System V, assume it is SunOS 4.
*/
#ifdef LOGIN_PROCESS /* defined in System V utmp.h */
#define SYSV_STYLE /* select System V style getty */
#include <sys/utsname.h>
#include <time.h>
#if ENABLE_FEATURE_WTMP
extern void updwtmp(const char *filename, const struct utmp *ut);
static void update_utmp(const char *line);
#endif
#endif /* LOGIN_PROCESS */
/*
* Things you may want to modify.
*
* You may disagree with the default line-editing etc. characters defined
* below. Note, however, that DEL cannot be used for interrupt generation
* and for line editing at the same time.
*/
/* I doubt there are systems which still need this */
#undef HANDLE_ALLCAPS
#define _PATH_LOGIN "/bin/login"
/* If ISSUE is not defined, getty will never display the contents of the
* /etc/issue file. You will not want to spit out large "issue" files at the
* wrong baud rate.
*/
#define ISSUE "/etc/issue" /* displayed before the login prompt */
/* Some shorthands for control characters. */
#define CTL(x) (x ^ 0100) /* Assumes ASCII dialect */
#define CR CTL('M') /* carriage return */
#define NL CTL('J') /* line feed */
#define BS CTL('H') /* back space */
#define DEL CTL('?') /* delete */
/* Defaults for line-editing etc. characters; you may want to change this. */
#define DEF_ERASE DEL /* default erase character */
#define DEF_INTR CTL('C') /* default interrupt character */
#define DEF_QUIT CTL('\\') /* default quit char */
#define DEF_KILL CTL('U') /* default kill char */
#define DEF_EOF CTL('D') /* default EOF char */
#define DEF_EOL '\n'
#define DEF_SWITCH 0 /* default switch char */
/*
* When multiple baud rates are specified on the command line, the first one
* we will try is the first one specified.
*/
#define FIRST_SPEED 0
/* Storage for command-line options. */
#define MAX_SPEED 10 /* max. nr. of baud rates */
struct options {
int flags; /* toggle switches, see below */
unsigned timeout; /* time-out period */
const char *login; /* login program */
const char *tty; /* name of tty */
const char *initstring; /* modem init string */
const char *issue; /* alternative issue file */
int numspeed; /* number of baud rates to try */
int speeds[MAX_SPEED]; /* baud rates to be tried */
};
static const char opt_string[] = "I:LH:f:hil:mt:wn";
#define F_INITSTRING (1<<0) /* initstring is set */
#define F_LOCAL (1<<1) /* force local */
#define F_FAKEHOST (1<<2) /* force fakehost */
#define F_CUSTISSUE (1<<3) /* give alternative issue file */
#define F_RTSCTS (1<<4) /* enable RTS/CTS flow control */
#define F_ISSUE (1<<5) /* display /etc/issue */
#define F_LOGIN (1<<6) /* non-default login program */
#define F_PARSE (1<<7) /* process modem status messages */
#define F_TIMEOUT (1<<8) /* time out */
#define F_WAITCRLF (1<<9) /* wait for CR or LF */
#define F_NOPROMPT (1<<10) /* don't ask for login name! */
/* Storage for things detected while the login name was read. */
struct chardata {
unsigned char erase; /* erase character */
unsigned char kill; /* kill character */
unsigned char eol; /* end-of-line character */
unsigned char parity; /* what parity did we see */
#ifdef HANDLE_ALLCAPS
unsigned char capslock; /* upper case without lower case */
#endif
};
/* Initial values for the above. */
static const struct chardata init_chardata = {
DEF_ERASE, /* default erase character */
DEF_KILL, /* default kill character */
13, /* default eol char */
0, /* space parity */
#ifdef HANDLE_ALLCAPS
0, /* no capslock */
#endif
};
/* The following is used for understandable diagnostics. */
/* Fake hostname for ut_host specified on command line. */
static char *fakehost = NULL;
/* ... */
#ifdef DEBUGGING
#define debug(s) fprintf(dbf,s); fflush(dbf)
#define DEBUGTERM "/dev/ttyp0"
static FILE *dbf;
#else
#define debug(s) /* nothing */
#endif
/* bcode - convert speed string to speed code; return 0 on failure */
static int bcode(const char *s)
{
int r;
unsigned value = bb_strtou(s, NULL, 10);
if (errno) {
return -1;
}
r = tty_value_to_baud(value);
if (r > 0) {
return r;
}
return 0;
}
/* parse_speeds - parse alternate baud rates */
static void parse_speeds(struct options *op, char *arg)
{
char *cp;
debug("entered parse_speeds\n");
for (cp = strtok(arg, ","); cp != 0; cp = strtok((char *) 0, ",")) {
if ((op->speeds[op->numspeed++] = bcode(cp)) <= 0)
bb_error_msg_and_die("bad speed: %s", cp);
if (op->numspeed > MAX_SPEED)
bb_error_msg_and_die("too many alternate speeds");
}
debug("exiting parsespeeds\n");
}
/* parse_args - parse command-line arguments */
static void parse_args(int argc, char **argv, struct options *op)
{
char *ts;
op->flags = getopt32(argc, argv, opt_string,
&(op->initstring), &fakehost, &(op->issue),
&(op->login), &ts);
if (op->flags & F_INITSTRING) {
const char *p = op->initstring;
char *q;
op->initstring = q = xstrdup(op->initstring);
/* copy optarg into op->initstring decoding \ddd
octal codes into chars */
while (*p) {
if (*p == '\\') {
p++;
*q++ = bb_process_escape_sequence(&p);
} else {
*q++ = *p++;
}
}
*q = '\0';
}
op->flags ^= F_ISSUE; /* revert flag show /etc/issue */
if (op->flags & F_TIMEOUT) {
op->timeout = xatoul_range(ts, 1, INT_MAX);
}
argv += optind;
argc -= optind;
debug("after getopt loop\n");
if (argc < 2) /* check parameter count */
bb_show_usage();
/* we loosen up a bit and accept both "baudrate tty" and "tty baudrate" */
if (isdigit(argv[0][0])) {
/* a number first, assume it's a speed (BSD style) */
parse_speeds(op, argv[0]); /* baud rate(s) */
op->tty = argv[1]; /* tty name */
} else {
op->tty = argv[0]; /* tty name */
parse_speeds(op, argv[1]); /* baud rate(s) */
}
if (argv[2])
setenv("TERM", argv[2], 1);
debug("exiting parseargs\n");
}
static void xdup2(int srcfd, int dstfd, const char *tty)
{
if (dup2(srcfd, dstfd) == -1)
bb_perror_msg_and_die("%s: dup", tty);
}
/* open_tty - set up tty as standard { input, output, error } */
static void open_tty(const char *tty, struct termios *tp, int local)
{
int chdir_to_root = 0;
/* Set up new standard input, unless we are given an already opened port. */
if (NOT_LONE_DASH(tty)) {
struct stat st;
int fd;
/* Sanity checks... */
xchdir("/dev");
chdir_to_root = 1;
xstat(tty, &st);
if ((st.st_mode & S_IFMT) != S_IFCHR)
bb_error_msg_and_die("%s: not a character device", tty);
/* Open the tty as standard input. */
debug("open(2)\n");
fd = xopen(tty, O_RDWR | O_NONBLOCK);
xdup2(fd, 0, tty);
while (fd > 2) close(fd--);
} else {
/*
* Standard input should already be connected to an open port. Make
* sure it is open for read/write.
*/
if ((fcntl(0, F_GETFL, 0) & O_RDWR) != O_RDWR)
bb_error_msg_and_die("stdin is not open for read/write");
}
/* Replace current standard output/error fd's with new ones */
debug("duping\n");
xdup2(0, 1, tty);
xdup2(0, 2, tty);
/*
* The following ioctl will fail if stdin is not a tty, but also when
* there is noise on the modem control lines. In the latter case, the
* common course of action is (1) fix your cables (2) give the modem more
* time to properly reset after hanging up. SunOS users can achieve (2)
* by patching the SunOS kernel variable "zsadtrlow" to a larger value;
* 5 seconds seems to be a good value.
*/
ioctl_or_perror_and_die(0, TCGETS, tp, "%s: TCGETS", tty);
/*
* It seems to be a terminal. Set proper protections and ownership. Mode
* 0622 is suitable for SYSV <4 because /bin/login does not change
* protections. SunOS 4 login will change the protections to 0620 (write
* access for group tty) after the login has succeeded.
*/
#ifdef DEBIAN
#warning Debian /dev/vcs[a]NN hack is deprecated and will be removed
{
/* tty to root.dialout 660 */
struct group *gr;
int id;
gr = getgrnam("dialout");
id = gr ? gr->gr_gid : 0;
chown(tty, 0, id);
chmod(tty, 0660);
/* vcs,vcsa to root.sys 600 */
if (!strncmp(tty, "tty", 3) && isdigit(tty[3])) {
char *vcs, *vcsa;
vcs = xstrdup(tty);
vcsa = xmalloc(strlen(tty) + 2);
strcpy(vcs, "vcs");
strcpy(vcs + 3, tty + 3);
strcpy(vcsa, "vcsa");
strcpy(vcsa + 4, tty + 3);
gr = getgrnam("sys");
id = gr ? gr->gr_gid : 0;
chown(vcs, 0, id);
chmod(vcs, 0600);
chown(vcsa, 0, id);
chmod(vcs, 0600);
free(vcs);
free(vcsa);
}
}
#else
if (NOT_LONE_DASH(tty)) {
chown(tty, 0, 0); /* 0:0 */
chmod(tty, 0622); /* crw--w--w- */
}
#endif
if (chdir_to_root)
xchdir("/");
}
/* termios_init - initialize termios settings */
static void termios_init(struct termios *tp, int speed, struct options *op)
{
/*
* Initial termios settings: 8-bit characters, raw-mode, blocking i/o.
* Special characters are set after we have read the login name; all
* reads will be done in raw mode anyway. Errors will be dealt with
* later on.
*/
#ifdef __linux__
/* flush input and output queues, important for modems! */
ioctl(0, TCFLSH, TCIOFLUSH);
#endif
tp->c_cflag = CS8 | HUPCL | CREAD | speed;
if (op->flags & F_LOCAL) {
tp->c_cflag |= CLOCAL;
}
tp->c_iflag = tp->c_lflag = tp->c_line = 0;
tp->c_oflag = OPOST | ONLCR;
tp->c_cc[VMIN] = 1;
tp->c_cc[VTIME] = 0;
/* Optionally enable hardware flow control */
#ifdef CRTSCTS
if (op->flags & F_RTSCTS)
tp->c_cflag |= CRTSCTS;
#endif
ioctl(0, TCSETS, tp);
/* go to blocking input even in local mode */
fcntl(0, F_SETFL, fcntl(0, F_GETFL, 0) & ~O_NONBLOCK);
debug("term_io 2\n");
}
/* auto_baud - extract baud rate from modem status message */
static void auto_baud(char *buf, unsigned size_buf, struct termios *tp)
{
int speed;
int vmin;
unsigned iflag;
char *bp;
int nread;
/*
* This works only if the modem produces its status code AFTER raising
* the DCD line, and if the computer is fast enough to set the proper
* baud rate before the message has gone by. We expect a message of the
* following format:
*
* <junk><number><junk>
*
* The number is interpreted as the baud rate of the incoming call. If the
* modem does not tell us the baud rate within one second, we will keep
* using the current baud rate. It is advisable to enable BREAK
* processing (comma-separated list of baud rates) if the processing of
* modem status messages is enabled.
*/
/*
* Use 7-bit characters, don't block if input queue is empty. Errors will
* be dealt with later on.
*/
iflag = tp->c_iflag;
tp->c_iflag |= ISTRIP; /* enable 8th-bit stripping */
vmin = tp->c_cc[VMIN];
tp->c_cc[VMIN] = 0; /* don't block if queue empty */
ioctl(0, TCSETS, tp);
/*
* Wait for a while, then read everything the modem has said so far and
* try to extract the speed of the dial-in call.
*/
sleep(1);
nread = read(0, buf, size_buf - 1);
if (nread > 0) {
buf[nread] = '\0';
for (bp = buf; bp < buf + nread; bp++) {
if (isascii(*bp) && isdigit(*bp)) {
speed = bcode(bp);
if (speed) {
tp->c_cflag &= ~CBAUD;
tp->c_cflag |= speed;
}
break;
}
}
}
/* Restore terminal settings. Errors will be dealt with later on. */
tp->c_iflag = iflag;
tp->c_cc[VMIN] = vmin;
ioctl(0, TCSETS, tp);
}
/* next_speed - select next baud rate */
static void next_speed(struct termios *tp, struct options *op)
{
static int baud_index = FIRST_SPEED; /* current speed index */
baud_index = (baud_index + 1) % op->numspeed;
tp->c_cflag &= ~CBAUD;
tp->c_cflag |= op->speeds[baud_index];
ioctl(0, TCSETS, tp);
}
/* do_prompt - show login prompt, optionally preceded by /etc/issue contents */
static void do_prompt(struct options *op, struct termios *tp)
{
#ifdef ISSUE
print_login_issue(op->issue, op->tty);
#endif
print_login_prompt();
}
#ifdef HANDLE_ALLCAPS
/* caps_lock - string contains upper case without lower case */
/* returns 1 if true, 0 if false */
static int caps_lock(const char *s)
{
while (*s)
if (islower(*s++))
return 0;
return 1;
}
#endif
/* get_logname - get user name, establish parity, speed, erase, kill, eol */
/* return NULL on failure, logname on success */
static char *get_logname(char *logname, unsigned size_logname,
struct options *op, struct chardata *cp, struct termios *tp)
{
char *bp;
char c; /* input character, full eight bits */
char ascval; /* low 7 bits of input character */
int bits; /* # of "1" bits per character */
int mask; /* mask with 1 bit up */
static const char erase[][3] = { /* backspace-space-backspace */
"\010\040\010", /* space parity */
"\010\040\010", /* odd parity */
"\210\240\210", /* even parity */
"\210\240\210", /* no parity */
};
/* Initialize kill, erase, parity etc. (also after switching speeds). */
*cp = init_chardata;
/* Flush pending input (esp. after parsing or switching the baud rate). */
sleep(1);
ioctl(0, TCFLSH, TCIFLUSH);
/* Prompt for and read a login name. */
logname[0] = '\0';
while (!logname[0]) {
/* Write issue file and prompt, with "parity" bit == 0. */
do_prompt(op, tp);
/* Read name, watch for break, parity, erase, kill, end-of-line. */
bp = logname;
cp->eol = '\0';
while (cp->eol == '\0') {
/* Do not report trivial EINTR/EIO errors. */
if (read(0, &c, 1) < 1) {
if (errno == EINTR || errno == EIO)
exit(0);
bb_perror_msg_and_die("%s: read", op->tty);
}
/* Do BREAK handling elsewhere. */
if (c == '\0' && op->numspeed > 1)
return NULL;
/* Do parity bit handling. */
ascval = c & 0177;
if (c != ascval) { /* "parity" bit on ? */
bits = 1;
mask = 1;
while (mask & 0177) {
if (mask & ascval)
bits++; /* count "1" bits */
mask <<= 1;
}
/* ... |= 2 - even, 1 - odd */
cp->parity |= 2 - (bits & 1);
}
/* Do erase, kill and end-of-line processing. */
switch (ascval) {
case CR:
case NL:
*bp = '\0'; /* terminate logname */
cp->eol = ascval; /* set end-of-line char */
break;
case BS:
case DEL:
case '#':
cp->erase = ascval; /* set erase character */
if (bp > logname) {
write(1, erase[cp->parity], 3);
bp--;
}
break;
case CTL('U'):
case '@':
cp->kill = ascval; /* set kill character */
while (bp > logname) {
write(1, erase[cp->parity], 3);
bp--;
}
break;
case CTL('D'):
exit(0);
default:
if (!isascii(ascval) || !isprint(ascval)) {
/* ignore garbage characters */
} else if (bp - logname >= size_logname - 1) {
bb_error_msg_and_die("%s: input overrun", op->tty);
} else {
write(1, &c, 1); /* echo the character */
*bp++ = ascval; /* and store it */
}
break;
}
}
}
/* Handle names with upper case and no lower case. */
#ifdef HANDLE_ALLCAPS
cp->capslock = caps_lock(logname);
if (cp->capslock) {
for (bp = logname; *bp; bp++)
if (isupper(*bp))
*bp = tolower(*bp); /* map name to lower case */
}
#endif
return logname;
}
/* termios_final - set the final tty mode bits */
static void termios_final(struct options *op, struct termios *tp, struct chardata *cp)
{
/* General terminal-independent stuff. */
tp->c_iflag |= IXON | IXOFF; /* 2-way flow control */
tp->c_lflag |= ICANON | ISIG | ECHO | ECHOE | ECHOK | ECHOKE;
/* no longer| ECHOCTL | ECHOPRT */
tp->c_oflag |= OPOST;
/* tp->c_cflag = 0; */
tp->c_cc[VINTR] = DEF_INTR; /* default interrupt */
tp->c_cc[VQUIT] = DEF_QUIT; /* default quit */
tp->c_cc[VEOF] = DEF_EOF; /* default EOF character */
tp->c_cc[VEOL] = DEF_EOL;
tp->c_cc[VSWTC] = DEF_SWITCH; /* default switch character */
/* Account for special characters seen in input. */
if (cp->eol == CR) {
tp->c_iflag |= ICRNL; /* map CR in input to NL */
tp->c_oflag |= ONLCR; /* map NL in output to CR-NL */
}
tp->c_cc[VERASE] = cp->erase; /* set erase character */
tp->c_cc[VKILL] = cp->kill; /* set kill character */
/* Account for the presence or absence of parity bits in input. */
switch (cp->parity) {
case 0: /* space (always 0) parity */
break;
case 1: /* odd parity */
tp->c_cflag |= PARODD;
/* FALLTHROUGH */
case 2: /* even parity */
tp->c_cflag |= PARENB;
tp->c_iflag |= INPCK | ISTRIP;
/* FALLTHROUGH */
case (1 | 2): /* no parity bit */
tp->c_cflag &= ~CSIZE;
tp->c_cflag |= CS7;
break;
}
/* Account for upper case without lower case. */
#ifdef HANDLE_ALLCAPS
if (cp->capslock) {
tp->c_iflag |= IUCLC;
tp->c_lflag |= XCASE;
tp->c_oflag |= OLCUC;
}
#endif
/* Optionally enable hardware flow control */
#ifdef CRTSCTS
if (op->flags & F_RTSCTS)
tp->c_cflag |= CRTSCTS;
#endif
/* Finally, make the new settings effective */
ioctl_or_perror_and_die(0, TCSETS, tp, "%s: TCSETS", op->tty);
}
#ifdef SYSV_STYLE
#if ENABLE_FEATURE_UTMP
/* update_utmp - update our utmp entry */
static void update_utmp(const char *line)
{
struct utmp ut;
struct utmp *utp;
time_t t;
int mypid = getpid();
/*
* The utmp file holds miscellaneous information about things started by
* /sbin/init and other system-related events. Our purpose is to update
* the utmp entry for the current process, in particular the process type
* and the tty line we are listening to. Return successfully only if the
* utmp file can be opened for update, and if we are able to find our
* entry in the utmp file.
*/
if (access(_PATH_UTMP, R_OK|W_OK) == -1) {
close(creat(_PATH_UTMP, 0664));
}
utmpname(_PATH_UTMP);
setutent();
while ((utp = getutent())
&& !(utp->ut_type == INIT_PROCESS && utp->ut_pid == mypid))
/* nothing */;
if (utp) {
memcpy(&ut, utp, sizeof(ut));
} else {
/* some inits don't initialize utmp... */
memset(&ut, 0, sizeof(ut));
safe_strncpy(ut.ut_id, line + 3, sizeof(ut.ut_id));
}
/* endutent(); */
strcpy(ut.ut_user, "LOGIN");
safe_strncpy(ut.ut_line, line, sizeof(ut.ut_line));
if (fakehost)
safe_strncpy(ut.ut_host, fakehost, sizeof(ut.ut_host));
time(&t);
ut.ut_time = t;
ut.ut_type = LOGIN_PROCESS;
ut.ut_pid = mypid;
pututline(&ut);
endutent();
#if ENABLE_FEATURE_WTMP
if (access(bb_path_wtmp_file, R_OK|W_OK) == -1)
close(creat(bb_path_wtmp_file, 0664));
updwtmp(bb_path_wtmp_file, &ut);
#endif
}
#endif /* CONFIG_FEATURE_UTMP */
#endif /* SYSV_STYLE */
int getty_main(int argc, char **argv);
int getty_main(int argc, char **argv)
{
int nullfd;
char *logname = NULL; /* login name, given to /bin/login */
/* Merging these into "struct local" may _seem_ to reduce
* parameter passing, but today's gcc will inline
* statics which are called once anyway, so don't do that */
struct chardata chardata; /* set by get_logname() */
struct termios termios; /* terminal mode bits */
struct options options = {
0, /* show /etc/issue (SYSV_STYLE) */
0, /* no timeout */
_PATH_LOGIN, /* default login program */
"tty1", /* default tty line */
"", /* modem init string */
#ifdef ISSUE
ISSUE, /* default issue file */
#else
NULL,
#endif
0, /* no baud rates known yet */
};
/* Already too late because of theoretical
* possibility of getty --help somehow triggered
* inadvertently before we reach this. Oh well. */
logmode = LOGMODE_NONE;
setsid();
nullfd = xopen(bb_dev_null, O_RDWR);
/* dup2(nullfd, 0); - no, because of possible "getty - 9600" */
/* open_tty() will take care of fd# 0 anyway */
dup2(nullfd, 1);
dup2(nullfd, 2);
while (nullfd > 2) close(nullfd--);
/* We want special flavor of error_msg_and_die */
die_sleep = 10;
msg_eol = "\r\n";
openlog(applet_name, LOG_PID, LOG_AUTH);
logmode = LOGMODE_BOTH;
#ifdef DEBUGGING
dbf = xfopen(DEBUGTERM, "w");
{
int i;
for (i = 1; i < argc; i++) {
debug(argv[i]);
debug("\n");
}
}
#endif
/* Parse command-line arguments. */
parse_args(argc, argv, &options);
#ifdef SYSV_STYLE
#if ENABLE_FEATURE_UTMP
/* Update the utmp file. */
update_utmp(options.tty);
#endif
#endif
debug("calling open_tty\n");
/* Open the tty as standard { input, output, error }. */
open_tty(options.tty, &termios, options.flags & F_LOCAL);
#ifdef __linux__
{
int iv;
iv = getpid();
ioctl(0, TIOCSPGRP, &iv);
}
#endif
/* Initialize the termios settings (raw mode, eight-bit, blocking i/o). */
debug("calling termios_init\n");
termios_init(&termios, options.speeds[FIRST_SPEED], &options);
/* write the modem init string and DON'T flush the buffers */
if (options.flags & F_INITSTRING) {
debug("writing init string\n");
write(1, options.initstring, strlen(options.initstring));
}
if (!(options.flags & F_LOCAL)) {
/* go to blocking write mode unless -L is specified */
fcntl(1, F_SETFL, fcntl(1, F_GETFL, 0) & ~O_NONBLOCK);
}
/* Optionally detect the baud rate from the modem status message. */
debug("before autobaud\n");
if (options.flags & F_PARSE)
auto_baud(bb_common_bufsiz1, sizeof(bb_common_bufsiz1), &termios);
/* Set the optional timer. */
if (options.timeout)
alarm(options.timeout);
/* optionally wait for CR or LF before writing /etc/issue */
if (options.flags & F_WAITCRLF) {
char ch;
debug("waiting for cr-lf\n");
while (read(0, &ch, 1) == 1) {
ch &= 0x7f; /* strip "parity bit" */
#ifdef DEBUGGING
fprintf(dbf, "read %c\n", ch);
#endif
if (ch == '\n' || ch == '\r')
break;
}
}
chardata = init_chardata;
if (!(options.flags & F_NOPROMPT)) {
/* Read the login name. */
debug("reading login name\n");
logname = get_logname(bb_common_bufsiz1, sizeof(bb_common_bufsiz1),
&options, &chardata, &termios);
while (logname == NULL)
next_speed(&termios, &options);
}
/* Disable timer. */
if (options.timeout)
alarm(0);
/* Finalize the termios settings. */
termios_final(&options, &termios, &chardata);
/* Now the newline character should be properly written. */
write(1, "\n", 1);
/* Let the login program take care of password validation. */
execl(options.login, options.login, "--", logname, (char *) 0);
bb_error_msg_and_die("%s: can't exec %s", options.tty, options.login);
}