openrc/net/iproute2.sh

403 lines
8.5 KiB
Bash
Raw Normal View History

2009-05-01 19:41:40 +05:30
# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
# Released under the 2-clause BSD license.
_ip()
{
if [ -x /bin/ip ]; then
echo /bin/ip
else
echo /sbin/ip
fi
}
iproute2_depend()
{
program $(_ip)
provide interface
after ifconfig
}
_up()
{
ip link set "${IFACE}" up
}
_down()
{
ip link set "${IFACE}" down
}
_exists()
{
grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/dev
}
_ifindex()
{
local line= i=-2
2007-11-28 21:15:03 +05:30
while read line; do
: $(( i += 1 ))
[ ${i} -lt 1 ] && continue
case "${line}" in
"${IFACE}:"*) echo "${i}"; return 0;;
esac
done < /proc/net/dev
2007-08-08 02:31:16 +05:30
# Return the next available index
: $(( i += 1 ))
2007-08-08 02:31:16 +05:30
echo "${i}"
return 1
}
_is_wireless()
{
# Support new sysfs layout
2009-12-06 00:55:39 +05:30
[ -d /sys/class/net/"${IFACE}"/wireless -o \
-d /sys/class/net/"${IFACE}"/phy80211 ] && return 0
[ ! -e /proc/net/wireless ] && return 1
grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless
}
_set_flag()
{
local flag=$1 opt="on"
if [ "${flag#-}" != "${flag}" ]; then
flag=${flag#-}
opt="off"
fi
ip link set "${IFACE}" "${flag}" "${opt}"
}
_get_mac_address()
{
local mac=$(LC_ALL=C ip link show "${IFACE}" | sed -n \
-e 'y/abcdef/ABCDEF/' \
-e '/link\// s/^.*\<\(..:..:..:..:..:..\)\>.*/\1/p')
case "${mac}" in
2007-11-28 21:15:03 +05:30
00:00:00:00:00:00);;
44:44:44:44:44:44);;
FF:FF:FF:FF:FF:FF);;
"");;
*) echo "${mac}"; return 0;;
esac
return 1
}
_set_mac_address()
{
ip link set "${IFACE}" address "$1"
}
_get_inet_addresses()
{
LC_ALL=C ip -family inet addr show "${IFACE}" | \
sed -n -e 's/.*inet \([^ ]*\).*/\1/p'
}
_get_inet_address()
{
set -- $(_get_inet_addresses)
[ $# = "0" ] && return 1
echo "$1"
}
_add_address()
{
2007-11-28 21:15:03 +05:30
if [ "$1" = "127.0.0.1/8" -a "${IFACE}" = "lo" ]; then
ip addr add "$@" dev "${IFACE}" 2>/dev/null
return 0
fi
local address netmask broadcast peer anycast label scope
local valid_lft preferred_lft home nodad
local confflaglist
address="$1" ; shift
while [ -n "$*" ]; do
case "$1" in
netmask)
netmask="/$(_netmask2cidr "$2")" ; shift ; shift ;;
broadcast|brd)
broadcast="$2" ; shift ; shift ;;
pointopoint|pointtopoint|peer)
peer="$2" ; shift ; shift ;;
anycast|label|scope|valid_lft|preferred_lft)
eval "$1=$2" ; shift ; shift ;;
home|nodad)
# FIXME: If we need to reorder these, this will take more code
confflaglist="${confflaglist} $1" ; shift ;;
esac
done
# Always scope lo addresses as host unless specified otherwise
2007-11-28 21:15:03 +05:30
if [ "${IFACE}" = "lo" ]; then
[ -z "$scope" ] && scope="host"
fi
# figure out the broadcast address if it is not specified
# This must NOT be set for IPv6 addresses
if [ "${address/:}" = "${address}" ]; then
[ -z "$broadcast" ] && broadcast="+"
elif [ -n "$broadcast" ]; then
eerror "Broadcast keywords are not valid with IPv6 addresses"
return 1
fi
# This must appear on a single line, continuations cannot be used
set -- "${address}${netmask}" ${peer:+peer} ${peer} ${broadcast:+broadcast} ${broadcast} ${anycast:+anycast} ${anycast} ${label:+label} ${label} ${scope:+scope} ${scope} dev "${IFACE}" ${valid_lft:+valid_lft} $valid_lft ${preferred_lft:+preferred_lft} $preferred_lft $confflaglist
veinfo ip addr add "$@"
ip addr add "$@"
}
_add_route()
{
2009-04-20 01:35:40 +05:30
local family=
if [ "$1" = "-A" -o "$1" = "-f" -o "$1" = "-family" ]; then
family="-f $2"
shift; shift
elif [ "$1" = "-4" ]; then
family="-f inet"
shift
elif [ "$1" = "-6" ]; then
family="-f inet6"
shift
2009-04-20 01:35:40 +05:30
fi
2007-11-28 21:15:03 +05:30
if [ $# -eq 3 ]; then
set -- "$1" "$2" via "$3"
2007-11-28 21:15:03 +05:30
elif [ "$3" = "gw" ]; then
local one=$1 two=$2
2007-11-28 21:15:03 +05:30
shift; shift; shift
2007-12-31 14:56:53 +05:30
set -- "${one}" "${two}" via "$@"
fi
local cmd= have_metric=false
2007-11-28 21:15:03 +05:30
while [ -n "$1" ]; do
case "$1" in
2007-11-28 21:15:03 +05:30
metric) cmd="${cmd} $1"; have_metric=true;;
netmask) cmd="${cmd}/$(_netmask2cidr "$2")"; shift;;
-host|-net);;
*) cmd="${cmd} $1";;
esac
shift
done
2009-06-02 00:36:56 +05:30
# We cannot use a metric if we're using a nexthop
if ! ${have_metric} && \
[ -n "${metric}" -a \
"${cmd##* nexthop }" = "$cmd" ]
2009-06-02 00:36:56 +05:30
then
cmd="${cmd} metric ${metric}"
fi
veinfo ip ${family} route append ${cmd} dev "${IFACE}"
2009-04-20 01:35:40 +05:30
ip ${family} route append ${cmd} dev "${IFACE}"
eend $?
}
_delete_addresses()
{
ip addr flush dev "${IFACE}" scope global 2>/dev/null
ip addr flush dev "${IFACE}" scope site 2>/dev/null
2007-11-28 21:15:03 +05:30
if [ "${IFACE}" != "lo" ]; then
ip addr flush dev "${IFACE}" scope host 2>/dev/null
fi
return 0
}
_has_carrier()
{
return 0
}
_tunnel()
{
ip tunnel "$@"
}
# This is just to trim whitespace, do not add any quoting!
_trim() {
echo $*
}
# This is our interface to Routing Policy Database RPDB
# This allows for advanced routing tricks
_ip_rule_runner() {
local cmd rules OIFS="${IFS}" family
if [ "$1" = "-4" -o "$1" = "-6" ]; then
family="$1"
shift
else
family="-4"
fi
cmd="$1"
rules="$2"
veindent
local IFS="$__IFS"
for ru in $rules ; do
unset IFS
ruN="$(_trim "${ru}")"
[ -z "${ruN}" ] && continue
vebegin "${cmd} ${ruN}"
ip $family rule ${cmd} ${ru}
veend $?
local IFS="$__IFS"
done
IFS="${OIFS}"
veoutdent
}
iproute2_pre_start()
{
local tunnel=
eval tunnel=\$iptunnel_${IFVAR}
2007-11-28 21:15:03 +05:30
if [ -n "${tunnel}" ]; then
# Set our base metric to 1000
metric=1000
# Bug#347657: If the mode is 'ipip6' or 'ip6ip6', the -6 must be passed
# to iproute2 during tunnel creation.
local ipproto=''
[ "${tunnel##mode ipip6}" != "${tunnel}" ] && ipproto='-6'
[ "${tunnel##mode ip6ip6}" != "${tunnel}" ] && ipproto='-6'
ebegin "Creating tunnel ${IFVAR}"
ip ${ipproto} tunnel add ${tunnel} name "${IFACE}"
eend $? || return 1
_up
fi
# MTU support
local mtu=
eval mtu=\$mtu_${IFVAR}
[ -n "${mtu}" ] && ip link set "${IFACE}" mtu "${mtu}"
# TX Queue Length support
local len=
eval len=\$txqueuelen_${IFVAR}
[ -n "${len}" ] && ip link set "${IFACE}" txqueuelen "${len}"
return 0
}
_iproute2_ipv6_tentative()
{
# Only check tentative when we have a carrier.
LC_ALL=C ip link show dev "${IFACE}" | grep -q "NO-CARRIER" && return 1
LC_ALL=C ip addr show dev "${IFACE}" | \
grep -q "^[[:space:]]*inet6 .* tentative"
}
iproute2_post_start()
{
local n=5
# Kernel may not have IP built in
if [ -e /proc/net/route ]; then
local rules="$(_get_array "rules_${IFVAR}")"
if [ -n "${rules}" ]; then
if ! ip -4 rule list | grep -q "^"; then
eerror "IP Policy Routing (CONFIG_IP_MULTIPLE_TABLES) needed for ip rule"
else
service_set_value "ip_rule" "${rules}"
einfo "Adding IPv4 RPDB rules"
_ip_rule_runner -4 add "${rules}"
fi
fi
ip -4 route flush table cache dev "${IFACE}"
fi
# Kernel may not have IPv6 built in
if [ -e /proc/net/ipv6_route ]; then
local rules="$(_get_array "rules6_${IFVAR}")"
if [ -n "${rules}" ]; then
if ! ip -6 rule list | grep -q "^"; then
eerror "IPv6 Policy Routing (CONFIG_IPV6_MULTIPLE_TABLES) needed for ip rule"
else
service_set_value "ip6_rule" "${rules}"
einfo "Adding IPv6 RPDB rules"
_ip_rule_runner -6 add "${rules}"
fi
fi
ip -6 route flush table cache dev "${IFACE}"
fi
if _iproute2_ipv6_tentative; then
ebegin "Waiting for IPv6 addresses"
while [ $n -ge 0 ]; do
_iproute2_ipv6_tentative || break
sleep 1
: $(( n -= 1 ))
done
[ $n -ge 0 ]
eend $?
fi
return 0
}
iproute2_post_stop()
{
# Kernel may not have IP built in
if [ -e /proc/net/route ]; then
local rules="$(service_get_value "ip_rule")"
if [ -n "${rules}" ]; then
einfo "Removing IPv4 RPDB rules"
_ip_rule_runner -4 del "${rules}"
fi
# Only do something if the interface actually exist
if _exists; then
ip -4 route flush table cache dev "${IFACE}"
fi
fi
# Kernel may not have IPv6 built in
if [ -e /proc/net/ipv6_route ]; then
local rules="$(service_get_value "ip6_rule")"
if [ -n "${rules}" ]; then
einfo "Removing IPv6 RPDB rules"
_ip_rule_runner -6 del "${rules}"
fi
# Only do something if the interface actually exist
if _exists; then
ip -6 route flush table cache dev "${IFACE}"
fi
fi
# Don't delete sit0 as it's a special tunnel
2007-11-28 21:15:03 +05:30
if [ "${IFACE}" != "sit0" ]; then
if [ -n "$(ip tunnel show "${IFACE}" 2>/dev/null)" ]; then
ebegin "Destroying tunnel ${IFACE}"
ip tunnel del "${IFACE}"
eend $?
fi
fi
}
# Is the interface administratively/operationally up?
# The 'UP' status in ifconfig/iproute2 is the administrative status
# Operational state is available in iproute2 output as 'state UP', or the
# operstate sysfs variable.
# 0: up
# 1: down
# 2: invalid arguments
is_admin_up()
{
local iface="$1"
[ -z "$iface" ] && iface="$IFACE"
ip link show dev $iface | \
sed -n '1,1{ /[<,]UP[,>]/{ q 0 }}; q 1; '
}
is_oper_up()
{
local iface="$1"
[ -z "$iface" ] && iface="$IFACE"
read state </sys/class/net/"${iface}"/operstate
[ "x$state" = "up" ]
}