openrc/sh/openrc-run.sh.in

363 lines
8.0 KiB
Bash
Raw Normal View History

#!@SHELL@
# Shell wrapper for openrc-run
# Copyright (c) 2007-2015 The OpenRC Authors.
# See the Authors file at the top-level directory of this distribution and
# https://github.com/OpenRC/openrc/blob/master/AUTHORS
#
# This file is part of OpenRC. It is subject to the license terms in
# the LICENSE file found in the top-level directory of this
# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
# This file may not be copied, modified, propagated, or distributed
# except according to the terms contained in the LICENSE file.
verify_boot()
{
if [ ! -e ${RC_SVCDIR}/softlevel ]; then
eerror "You are attempting to run an openrc service on a"
eerror "system which openrc did not boot."
eerror "You may be inside a chroot or you may have used"
eerror "another initialization system to boot this system."
eerror "In this situation, you will get unpredictable results!"
eerror
eerror "If you really want to do this, issue the following command:"
eerror "touch ${RC_SVCDIR}/softlevel"
exit 1
fi
return 0
}
sourcex()
{
if [ "$1" = "-e" ]; then
shift
[ -e "$1" ] || return 1
fi
if ! . "$1"; then
eerror "$RC_SVCNAME: error loading $1"
exit 1
fi
}
sourcex "@LIBEXECDIR@/sh/functions.sh"
sourcex "@LIBEXECDIR@/sh/rc-functions.sh"
case $RC_SYS in
PREFIX|SYSTEMD-NSPAWN) ;;
*) sourcex -e "@LIBEXECDIR@/sh/rc-cgroup.sh";;
esac
# Support LiveCD foo
if sourcex -e "/sbin/livecd-functions.sh"; then
livecd_read_commandline
fi
if [ -z "$1" -o -z "$2" ]; then
2009-04-27 02:43:26 +05:30
eerror "$RC_SVCNAME: not enough arguments"
exit 1
fi
# So daemons know where to recall us if needed
RC_SERVICE="$1" ; export RC_SERVICE
shift
# Compat
SVCNAME=$RC_SVCNAME ; export SVCNAME
# Dependency function
config() {
[ -n "$*" ] && echo "config $*"
}
need() {
[ -n "$*" ] && echo "need $*"
}
use() {
[ -n "$*" ] && echo "use $*"
}
want() {
[ -n "$*" ] && echo "want $*"
}
before() {
[ -n "$*" ] && echo "before $*"
}
after() {
[ -n "$*" ] && echo "after $*"
}
provide() {
[ -n "$*" ] && echo "provide $*"
}
keyword() {
2015-12-04 01:39:38 +05:30
local c x
set -- $*
while [ -n "$*" ]; do
case "$1" in
-containers) x="$(_get_containers)" ;;
!-containers) x="$(_get_containers_remove)" ;;
*) x=$1 ;;
esac
c="${c}${x} "
shift
done
[ -n "$c" ] && echo "keyword $c"
}
# Describe the init script to the user
describe()
{
2009-04-27 02:43:26 +05:30
if [ -n "$description" ]; then
einfo "$description"
else
2009-04-27 02:43:26 +05:30
ewarn "No description for $RC_SVCNAME"
fi
local svc= desc=
2011-10-18 00:17:45 +05:30
for svc in ${extra_commands:-$opts} $extra_started_commands \
$extra_stopped_commands; do
2009-04-27 02:43:26 +05:30
eval desc=\$description_$svc
if [ -n "$desc" ]; then
einfo "$HILITE$svc$NORMAL: $desc"
else
2009-04-27 02:43:26 +05:30
ewarn "$HILITE$svc$NORMAL: no description"
fi
done
}
# Report status
_status()
{
if service_stopping; then
ewarn "status: stopping"
return 4
elif service_starting; then
ewarn "status: starting"
return 8
elif service_inactive; then
ewarn "status: inactive"
return 16
elif service_started; then
if service_crashed; then
eerror "status: crashed"
return 32
fi
einfo "status: started"
return 0
else
einfo "status: stopped"
return 3
fi
}
# Template start / stop / status functions
# These functions select the appropriate function to call from the
# supervisor modules
start()
{
local func=ssd_start
case "$supervisor" in
s6) func=s6_start ;;
?*)
ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
;;
esac
$func
}
stop()
{
local func=ssd_stop
case "$supervisor" in
s6) func=s6_stop ;;
?*)
ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
;;
esac
$func
}
status()
{
local func=ssd_status
case "$supervisor" in
s6) func=s6_status ;;
?*)
ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
;;
esac
$func
}
2009-04-27 02:43:26 +05:30
yesno $RC_DEBUG && set -x
_conf_d=${RC_SERVICE%/*}/../conf.d
# If we're net.eth0 or openvpn.work then load net or openvpn config
_c=${RC_SVCNAME%%.*}
if [ -n "$_c" -a "$_c" != "$RC_SVCNAME" ]; then
if ! sourcex -e "$_conf_d/$_c.$RC_RUNLEVEL"; then
sourcex -e "$_conf_d/$_c"
fi
fi
unset _c
# Overlay with our specific config
if ! sourcex -e "$_conf_d/$RC_SVCNAME.$RC_RUNLEVEL"; then
sourcex -e "$_conf_d/$RC_SVCNAME"
fi
unset _conf_d
# Load any system overrides
sourcex -e "@SYSCONFDIR@/rc.conf"
if [ -d "@SYSCONFDIR@/rc.conf.d" ]; then
for _f in "@SYSCONFDIR@"/rc.conf.d/*.conf; do
sourcex -e "$_f"
done
fi
# load service supervisor functions
sourcex "@LIBEXECDIR@/sh/s6.sh"
sourcex "@LIBEXECDIR@/sh/start-stop-daemon.sh"
# Set verbose mode
if yesno "${rc_verbose:-$RC_VERBOSE}"; then
EINFO_VERBOSE=yes
export EINFO_VERBOSE
fi
for _cmd; do
if [ "$_cmd" != status -a "$_cmd" != describe ]; then
# Apply any ulimit defined
[ -n "${rc_ulimit:-$RC_ULIMIT}" ] && \
ulimit ${rc_ulimit:-$RC_ULIMIT}
# Apply cgroups settings if defined
if [ "$(command -v cgroup_add_service)" = \
"cgroup_add_service" ]
then
if [ -d /sys/fs/cgroup -a ! -w /sys/fs/cgroup ]; then
eerror "No permission to apply cgroup settings"
break
fi
cgroup_add_service /sys/fs/cgroup/openrc
cgroup_add_service /sys/fs/cgroup/systemd/system
fi
[ "$(command -v cgroup_set_limits)" = \
"cgroup_set_limits" ] && \
cgroup_set_limits
break
2014-07-10 15:48:00 +05:30
fi
done
# Load our script
sourcex "$RC_SERVICE"
eval "printf '%s\n' $required_dirs" | while read _d; do
if [ -n "$_d" ] && [ ! -d "$_d" ]; then
2009-04-27 02:43:26 +05:30
eerror "$RC_SVCNAME: \`$_d' is not a directory"
exit 1
fi
done
[ $? -ne 0 ] && exit 1
unset _d
eval "printf '%s\n' $required_files" | while read _f; do
if [ -n "$_f" ] && [ ! -r "$_f" ]; then
2009-04-27 02:43:26 +05:30
eerror "$RC_SVCNAME: \`$_f' is not readable"
exit 1
fi
done
[ $? -ne 0 ] && exit 1
unset _f
if [ -n "$opts" ]; then
ewarn "Use of the opts variable is deprecated and will be"
ewarn "removed in the future."
2011-10-18 00:17:45 +05:30
ewarn "Please use extra_commands, extra_started_commands or extra_stopped_commands."
fi
while [ -n "$1" ]; do
# Special case depend
if [ "$1" = depend ]; then
shift
# Enter the dir of the init script to fix the globbing
# bug 412677
cd ${RC_SERVICE%/*}
_depend
cd /
continue
fi
# See if we have the required function and run it
for _cmd in describe start stop status ${extra_commands:-$opts} \
2011-10-18 00:17:45 +05:30
$extra_started_commands $extra_stopped_commands
2009-04-27 02:43:26 +05:30
do
if [ "$_cmd" = "$1" ]; then
if [ "$(command -v "$1")" = "$1" ]; then
# If we're in the background, we may wish to
# fake some commands. We do this so we can
# "start" ourselves from inactive which then
2009-04-27 02:43:26 +05:30
# triggers other services to start which
# depend on us.
# A good example of this is openvpn.
if yesno $IN_BACKGROUND; then
for _cmd in $in_background_fake; do
if [ "$_cmd" = "$1" ]; then
shift
continue 3
fi
done
fi
# Check to see if we need to be started before
# we can run this command
2009-04-27 02:43:26 +05:30
for _cmd in $extra_started_commands; do
if [ "$_cmd" = "$1" ]; then
if verify_boot && ! service_started; then
2009-04-27 02:43:26 +05:30
eerror "$RC_SVCNAME: cannot \`$1' as it has not been started"
exit 1
fi
fi
done
2011-10-18 00:17:45 +05:30
# Check to see if we need to be stopped before
# we can run this command
for _cmd in $extra_stopped_commands; do
if [ "$_cmd" = "$1" ]; then
if verify_boot && ! service_stopped; then
2011-10-18 00:17:45 +05:30
eerror "$RC_SVCNAME: cannot \`$1' as it has not been stopped"
exit 1
fi
fi
done
unset _cmd
case $1 in
start|stop|status) verify_boot;;
esac
2009-04-27 02:43:26 +05:30
if [ "$(command -v "$1_pre")" = "$1_pre" ]
then
"$1"_pre || exit $?
fi
"$1" || exit $?
2009-04-27 02:43:26 +05:30
if [ "$(command -v "$1_post")" = "$1_post" ]
then
"$1"_post || exit $?
fi
[ "$(command -v cgroup_cleanup)" = "cgroup_cleanup" -a \
"$1" = "stop" ] && \
yesno "${rc_cgroup_cleanup}" && \
cgroup_cleanup
shift
continue 2
else
2009-04-27 02:43:26 +05:30
if [ "$_cmd" = "start" -o "$_cmd" = "stop" ]
then
2008-01-26 22:16:53 +05:30
shift
continue 2
else
2009-04-27 02:43:26 +05:30
eerror "$RC_SVCNAME: function \`$1' defined but does not exist"
exit 1
fi
fi
fi
done
2009-04-27 02:43:26 +05:30
eerror "$RC_SVCNAME: unknown function \`$1'"
exit 1
done
exit 0