openrc/etc/rc.conf.in

149 lines
5.7 KiB
Plaintext
Raw Normal View History

2008-03-05 17:57:11 +05:30
# Global OpenRC configuration settings
# Set to "YES" if you want the rc system to try and start services
# in parallel for a slight speed improvement. When running in parallel we
# prefix the service output with its name as the output will get
# jumbled up.
# WARNING: whilst we have improved parallel, it can still potentially lock
# the boot process. Don't file bugs about this unless you can supply
# patches that fix it without breaking other things!
#rc_parallel="NO"
# Set rc_interactive to "YES" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "NO" to disable
# this feature. This feature is automatically disabled if rc_parallel is
# set to YES.
#rc_interactive="YES"
# If we need to drop to a shell, you can specify it here.
# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
# otherwise /bin/sh
# Linux users could specify /sbin/sulogin
#rc_shell=/bin/sh
2011-03-04 02:36:39 +05:30
# Do we allow any started service in the runlevel to satisfy the dependency
# or do we want all of them regardless of state? For example, if net.eth0
# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
# both will be started, but services that depend on 'net' will work if either
# one comes up. With rc_depend_strict="YES" we would require them both to
# come up.
#rc_depend_strict="YES"
2008-10-30 20:33:12 +05:30
# rc_hotplug is a list of services that we allow to be hotplugged.
# By default we do not allow hotplugging.
# A hotplugged service is one started by a dynamic dev manager when a matching
# hardware device is found.
# This service is intrinsically included in the boot runlevel.
# To disable services, prefix with a !
# Example - rc_hotplug="net.wlan !net.*"
# This allows net.wlan and any service not matching net.* to be plugged.
2008-10-30 20:33:12 +05:30
# Example - rc_hotplug="*"
# This allows all services to be hotplugged
#rc_hotplug="*"
# rc_logger launches a logging daemon to log the entire rc process to
# /var/log/rc.log
# NOTE: Linux systems require the devfs service to be started before
# logging can take place and as such cannot log the sysinit runlevel.
#rc_logger="YES"
2011-07-07 00:45:48 +05:30
# Through rc_log_path you can specify a custom log file.
2011-07-06 04:17:15 +05:30
# The default value is: /var/log/rc.log
2011-07-07 05:08:52 +05:30
#rc_log_path="/var/log/rc.log"
2011-07-06 04:17:15 +05:30
2014-08-11 23:27:23 +05:30
# If you want verbose output for OpenRC, set this to yes. If you want
# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
#rc_verbose=no
# By default we filter the environment for our running scripts. To allow other
# variables through, add them here. Use a * to allow all variables through.
#rc_env_allow="VAR1 VAR2"
# By default we assume that all daemons will start correctly.
# However, some do not - a classic example is that they fork and return 0 AND
# then child barfs on a configuration error. Or the daemon has a bug and the
# child crashes. You can set the number of milliseconds start-stop-daemon
# waits to check that the daemon is still running after starting here.
# The default is 0 - no checking.
#rc_start_wait=100
# rc_nostop is a list of services which will not stop when changing runlevels.
2009-04-19 15:55:38 +05:30
# This still allows the service itself to be stopped when called directly.
2009-04-27 14:36:30 +05:30
#rc_nostop=""
2009-04-19 15:55:38 +05:30
# rc will attempt to start crashed services by default.
# However, it will not stop them by default as that could bring down other
# critical services.
#rc_crashed_stop=NO
#rc_crashed_start=YES
2014-03-15 08:48:25 +05:30
# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
2014-03-10 02:05:41 +05:30
# output.
#rc_nocolor=NO
##############################################################################
# MISC CONFIGURATION VARIABLES
# There variables are shared between many init scripts
# Set unicode to YES to turn on unicode support for keyboards and screens.
#unicode="NO"
# This is how long fuser should wait for a remote server to respond. The
# default is 60 seconds, but it can be adjusted here.
#rc_fuser_timeout=60
# Below is the default list of network fstypes.
#
# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
# nfs nfs4 ocfs2 shfs smbfs
#
# If you would like to add to this list, you can do so by adding your
# own fstypes to the following variable.
#extra_net_fs_list=""
##############################################################################
# SERVICE CONFIGURATION VARIABLES
# These variables are documented here, but should be configured in
# /etc/conf.d/foo for service foo and NOT enabled here unless you
# really want them to work on a global basis.
# If your service has characters in its name which are not legal in
# shell variable names and you configure the variables for it in this
# file, those characters should be replaced with underscores in the
# variable names as shown below.
# Some daemons are started and stopped via start-stop-daemon.
# We can set some things on a per service basis, like the nicelevel.
#SSD_NICELEVEL="-19"
# Pass ulimit parameters
# If you are using bash in POSIX mode for your shell, note that the
# ulimit command uses a block size of 512 bytes for the -c and -f
# options
#rc_ulimit="-u 30"
# It's possible to define extra dependencies for services like so
#rc_config="/etc/foo"
#rc_need="openvpn"
#rc_use="net.eth0"
#rc_after="clock"
#rc_before="local"
#rc_provide="!net"
2008-01-02 21:12:52 +05:30
# You can also enable the above commands here for each service. Below is an
# example for service foo.
#rc_foo_config="/etc/foo"
#rc_foo_need="openvpn"
#rc_foo_after="clock"
# Below is an example for service foo-bar. Note that the '-' is illegal
# in a shell variable name, so we convert it to an underscore.
# example for service foo-bar.
#rc_foo_bar_config="/etc/foo-bar"
#rc_foo_bar_need="openvpn"
#rc_foo_bar_after="clock"
# You can also remove dependencies.
# This is mainly used for saying which servies do NOT provide net.
#rc_net_tap0_provide="!net"