Move /etc/conf.d/rc to /etc/rc.conf.

Lowercase all configurable variables, non configurations remain uppercase.
Replace rc_env_bool with rc_yesno.
Split localmount info procfs (Linux) and dumpon, savecore (BSD)
This commit is contained in:
Roy Marples 2007-11-23 12:04:11 +00:00
parent f077f179ed
commit d81def80b0
64 changed files with 755 additions and 477 deletions

View File

@ -2,14 +2,10 @@
# Set to your mouse device psm[0-9] for PS/2 ports, ums[0-9] for USB ports
# Leave blank to try to autodetect it
MOUSED_DEVICE=""
#moused_device="/dev/psm0"
# Any additional arguments required
MOUSED_ARGS=""
# If 0xd0-0xd3 default range is occupied in your language code table, specify
# alternative range start like MOUSECHAR_START="3", see vidcontrol(1)
MOUSECHAR_START=""
moused_args=""
# You can also multiplex the init script for each device like so
# ln -s moused /etc/init.d/moused.ums0

View File

@ -1,7 +1,7 @@
# Mode allowed: maximum, minimum, adaptive
# Default unless specified is adaptive
AC_MODE="maximum"
#BATTERY_MODE="minimum"
powerd_ac_mode="maximum"
#powerd_battery_mode="minimum"
# Addiditonal arguments for powerd
POWERD_OPTS=""
# Addiditonal arguments for powerd - see the man page for details
powerd_args=""

View File

@ -1,3 +1,3 @@
# To start rarpd only for a given interface, set the
# following variable. Otherwise we listen on all interfaces.
#RARPD_INTERFACE="rl0"
#rarpd_interface="rl0"

View File

@ -4,16 +4,16 @@
# NOTE:- This will blank the screen after this command is run
# NOTE:- You can get more modes if you load the vesa kernel module, but this
# may require the SC_PIXEL_MODE kernel option
#MODE="VGA_80x30"
#allscreen_flags="VGA_80x30"
# Set the keymap to "uk.iso".
#KEYMAP="uk.iso"
#keymap="uk.iso"
# Set the keyboard rate to 250ms delay, and 34 repeat rate.
#KEYRATE="250.34"
#keyrate="250.34"
# Change the behaviour of F-unction keys (see kbdcontrol(1)).
#KEYCHANGE="10 'ssh myhost'"
#keychange="10 'ssh myhost'"
# See vidcontrol(1) -t
#BLANKTIME="off"
#blanktime="off"

View File

@ -1,6 +1,6 @@
DIR = /etc/conf.d
CONF = consolefont keymaps net.example
CONF_APPEND = clock rc
CONF_APPEND = clock
TOPDIR = ..
include $(TOPDIR)/default.mk

View File

@ -2,11 +2,11 @@
# Put a nologin file in /etc to prevent people from logging in before
# system startup is complete
DELAYLOGIN="no"
delaylogin="no"
# List of /tmp directories we should clean up
WIPE_TMP_DIRS="/tmp"
wipe_tmp_dirs="/tmp"
# Should we wipe the tmp paths completely or just selectively remove known
# locks / files / etc... ?
WIPE_TMP="yes"
wipe_tmp="yes"

View File

@ -1,7 +1,7 @@
# FSCK_SHUTDOWN causes checkfs to trigger during shutdown as well as startup.
# fsck_shutdown causes checkfs to trigger during shutdown as well as startup.
# The end result of this is that if any periodic non-root filesystem checks are
# scheduled, under normal circumstances the actual check will happen during
# shutdown rather than at next boot.
# This is useful when periodic filesystem checks are causing undesirable
# delays at startup, but such delays at shutdown are acceptable.
FSCK_SHUTDOWN="no"
fsck_shutdown="NO"

View File

@ -4,16 +4,9 @@
# Greenwich Mean Time). If your clock is set to the local time, then
# set CLOCK to "local". Note that if you dual boot with Windows, then
# you should set it to "local".
CLOCK="UTC"
clock="UTC"
# If you want to set the Hardware Clock to the current System Time
# during shutdown, then say "yes" here.
# during shutdown, then say "YES" here.
# You normally don't need to do this if you run a ntp daemon.
CLOCK_SYSTOHC="no"
# Select the proper timezone. For valid values, peek inside of the
# /usr/share/zoneinfo/ directory. For example, some common values are
# "America/New_York" or "EST5EDT" or "Europe/Berlin". If you want to
# manage /etc/localtime yourself, set this to "".
TIMEZONE="Factory"
clock_systohc="NO"

View File

@ -1,2 +1,2 @@
# Set to the hostname of this machine
HOSTNAME="localhost"
hostname="localhost"

View File

@ -4,4 +4,4 @@
# (say for crypt swap), so you will need to customize this
# behavior. If you have /var on a separate partition, then
# make sure this path lives on your root device somewhere.
URANDOM_SEED="/var/run/random-seed"
urandom_seed="/var/run/random-seed"

View File

@ -41,6 +41,7 @@ install::
install:: $(BIN) $(CONF) $(CONF_APPEND)
if test -n "$(DIR)" ; then $(INSTALL) -d $(DESTDIR)$(DIR) || exit $$?; fi
if test -n "$(BIN)" ; then $(INSTALL) $(BIN) $(DESTDIR)$(DIR) || exit $$?; fi
if test -n "$(INC)" ; then $(INSTALL) -m 0644 $(INC) $(DESTDIR)$(DIR) || exit $$?; fi
for x in $(CONF); do \
if ! test -e $(DESTDIR)$(DIR)/$$x; then \
$(INSTALL) -m 0644 $$x $(DESTDIR)$(DIR) || exit $$?; \

View File

@ -1,5 +1,6 @@
DIR = /etc
CONF = inittab
CONF_APPEND = rc
TOPDIR = ..
include $(TOPDIR)/default.mk

View File

@ -4,16 +4,7 @@
# This is the number of tty's used in most of the rc-scripts (like
# consolefont, numlock, etc ...)
RC_TTY_NUMBER=12
# RC_DOWN_INTERFACE allows you to specify if RC will bring the interface
# completely down when it stops. The default is yes, but there are some
# instances where you may not want this to happen such as using Wake On LAN.
RC_DOWN_INTERFACE="yes"
# RC_DOWN_HARDDISK allows you to specify if RC will put harddisks to
# standby mode when it stops.
RC_DOWN_HARDDISK="yes"
rc_tty_number=12
# Use this variable to control the /dev management behavior.
# auto - let the scripts figure out what's best at boot
@ -21,7 +12,7 @@ RC_DOWN_HARDDISK="yes"
# mdev - use mdev (requires sys-apps/busybox)
# udev - use udev (requires sys-fs/udev)
# static - let the user manage /dev (YOU need to create ALL device nodes)
RC_DEVICES="auto"
rc_devices="auto"
# UDEV OPTION:
# Set to "yes" if you want to save /dev to a tarball on shutdown
@ -29,7 +20,6 @@ RC_DEVICES="auto"
# custom device nodes that udev does not handle/know about.
RC_DEVICE_TARBALL="no"
# RC_DMESG_LEVEL sets the level at which logging of messages is done to the
# Sets the level at which logging of messages is done to the
# console. See dmesg(8) for more info.
RC_DMESG_LEVEL="1"
dmesg_level="1"

5
etc/Makefile Normal file
View File

@ -0,0 +1,5 @@
DIR = /etc
CONF = rc.conf
TOPDIR = ..
include $(TOPDIR)/default.mk

View File

@ -1,68 +1,59 @@
# /etc/conf.d/rc: Global config file for OpenRC
# /etc/rc.conf: Global OpenRC configuration settings
# Set to "yes" if you want the rc system to try and start services
# Set to "YES" if you want the rc system to try and start services
# in parallel for a slight speed improvement. When running in parallel we
# prefix the service output with it's name as the output will get
# jumbled up.
RC_PARALLEL="no"
rc_parallel="NO"
# Set RC_INTERACTIVE to "yes" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "no" to disable
# Set rc_interactive to "YES" and you'll be able to press the I key during
# boot so you can choose to start specific services. Set to "NO" to disable
# this feature.
RC_INTERACTIVE="yes"
# RC_VERBOSE will make init scripts more verbose and adds
# "Service FOO starting/started/stopping/stopped" messages around each
# init script.
RC_VERBOSE="no"
# RC_QUIET on the other hand will make init scripts quiet and produce no
# output.
RC_QUIET="no"
rc_interactive="YES"
# Do we allow any started service in the runlevel to satisfy the depedency
# or do we want all of them regardless of state? For example, if net.eth0
# and net.eth1 are in the default runlevel then with RC_DEPEND_STRICT="no"
# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
# both will be started, but services that depend on 'net' will work if either
# one comes up. With RC_DEPEND_STRICT="yes" we would require them both to
# one comes up. With rc_depend_strict="YES" we would require them both to
# come up.
RC_DEPEND_STRICT="yes"
rc_depend_strict="YES"
# Do we allow services to be hotplugged? If not, set to RC_HOTPLUG="no"
# Do we allow services to be hotplugged? If not, set to rc_hotplug="NO"
# NOTE: This does not affect anything hotplug/udev/devd related, just the
# starting/stopping of the init.d service triggered by it.
RC_HOTPLUG="yes"
rc_hotplug="YES"
# Dynamic /dev managers can trigger coldplug events which cause services to
# start before we are ready for them. If this happens, we can defer these
# services to start in the boot runlevel. Set RC_COLDPLUG="no" if you don't
# services to start in the boot runlevel. Set rc_coldplug="NO" if you don't
# want this.
# NOTE: This also affects module coldplugging in udev-096 and higher
# If you want module coldplugging but not coldplugging of services then you
# can set RC_COLDPLUG="yes" and RC_PLUG_SERVICES="!*"
RC_COLDPLUG="yes"
# can set rc_coldplug="YES" and rc_plug_services="!*"
rc_coldplug="YES"
# Some people want a finer grain over hotplug/coldplug. RC_PLUG_SERVICES is a
# Some people want a finer grain over hotplug/coldplug. rc_plug_services is a
# list of services that are matched in order, either allowing or not. By
# default we allow services through as RC_COLDPLUG/RC_HOTPLUG has to be yes
# default we allow services through as rc_coldplug/rc_hotplug has to be YES
# anyway.
# Example - RC_PLUG_SERVICES="net.wlan !net.*"
# Example - rc_plug_services="net.wlan !net.*"
# This allows net.wlan and any service not matching net.* to be plugged.
RC_PLUG_SERVICES=""
rc_plug_services=""
# Define network fstypes. Below is the default.
#RC_NET_FS_LIST="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
# RC_FORCE_AUTO tries its best to prevent user interaction during the boot and
# rc_force_auto tries its best to prevent user interaction during the boot and
# shutdown process. For example, fsck will automatically be run or volumes
# remounted to create proper directory trees. This feature can be dangerous
# and is meant ONLY for headless machines where getting a physical console
# hooked up is a huge pita.
RC_FORCE_AUTO="no"
rc_force_auto="NO"
# RC_LOGGER launches a logging daemon to log the entire rc process to
# rc_logger launches a logging daemon to log the entire rc process to
# /var/log/rc.log
RC_LOGGER="no"
rc_logger="NO"
##############################################################################
# SERVICE CONFIGURATION VARIABLES
@ -75,11 +66,11 @@ RC_LOGGER="no"
#export SSD_NICELEVEL="-19"
# Pass ulimit parameters
#RC_ULIMIT="-u 30"
#rc_ulimit="-u 30"
# It's possible to define extra dependencies for services like so
#RC_CONFIG="/etc/foo"
#RC_NEED="openvpn"
#RC_USE="net.eth0"
#RC_AFTER="clock"
#RC_BEFORE="local"
#rc_config="/etc/foo"
#rc_need="openvpn"
#rc_use="net.eth0"
#rc_after="clock"
#rc_before="local"

View File

@ -29,19 +29,24 @@ extra_commands="save"
description="Sets the local clock to UTC or Local Time."
description_save="Saves the current time in the BIOS."
clock=${clock:-${CLOCK:-UTC}}
if [ "${clock}" = "UTC" ]; then
utc="UTC"
else
utc="Local Time"
fi
depend() {
# BSD adjkerntz needs to be able to write to /etc
if [ "${CLOCK}" = "UTC" -a -e /etc/wall_cmos_clock ] ||
[ "${CLOCK}" != "UTC" -a ! -e /etc/wall_cmos_clock ] ; then
if [ "${clock}" = "UTC" -a -e /etc/wall_cmos_clock ] ||
[ "${clock}" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
need checkroot
fi
}
start() {
local TBLURB="Local Time"
[ "${CLOCK}" = "UTC" ] && TBLURB="UTC"
ebegin "Starting the System Clock Adjuster [${TBLURB}]"
if [ "${CLOCK}" != "UTC" ] ; then
ebegin "Starting the System Clock Adjuster [${utc}]"
if [ "${clock}" != "UTC" ]; then
echo >/etc/wall_cmos_clock
start-stop-daemon --start --exec /sbin/adjkerntz -- -i
else
@ -52,16 +57,16 @@ start() {
}
save() {
local TBLURB="Local Time"
[ "${CLOCK}" = "UTC" ] && TBLURB="UTC"
ebegin "Setting hardware clock using the system clock" "[${TBLURB}]"
ebegin "Setting hardware clock using the system clock [${utc}]"
adjkerntz -a
eend $?
}
stop() {
# Don't tweak the hardware clock on LiveCD halt.
[ -z "${CDBOOT}" -a "${CLOCK_SYSTOHC}" = "yes" ] && save
if yesno "${clock_systohc:-${CLOCK_SYSTOHC}}"; then
[ -z "${CDBOOT}" ] && save
fi
ebegin "Stopping the System Clock Adjuster"
if start-stop-daemon --test --quiet --stop --exec /sbin/adjkerntz ; then

47
init.d.BSD/dumpon Executable file
View File

@ -0,0 +1,47 @@
#!/sbin/runscript
# Copyright 1999-2007 Gentoo Foundation
# Copyright 2007 Roy Marples
# All rights reserved
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
description="Configures a specific kernel dump device."
depend() {
need swap
before savecore
}
start() {
# Setup any user requested dump device
if [ -n "${dump_device}" ] ; then
ebegin "Activating kernel core dump device (${dump_device})"
dumpon ${dump_device}
eend $?
fi
}
stop() {
ebegin "Deactiving kernel core dump device"
dumpon off
eend $?
}

View File

@ -25,9 +25,9 @@
# This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
IP_IN=${IP_IN-any}
PORTS_IN=${PORTS_IN-auth ssh}
PORTS_NOLOG=${PORTS_NOLOG-135-139,445 1026,1027 1433,1434}
ipfw_ip_in=${ipfw_ip_in-any}
ipfw_ports_in=${ipfw_ports_in-auth ssh}
ipfw_ports_nolog=${ipfw_ports_nolog-135-139,445 1026,1027 1433,1434}
opts="panic showstatus"
@ -105,8 +105,8 @@ start() {
# Add permits for this workstations published services below
# Only IPs and nets in firewall_allowservices is allowed in.
for i in ${IP_IN}; do
for p in ${PORTS_IN}; do
for i in ${ipfw_ip_in}; do
for p in ${ipfw_ports_in}; do
ipfw add pass tcp from ${i} to me ${p}
done
done
@ -114,14 +114,14 @@ start() {
# Allow all connections from trusted IPs.
# Playing with the content of firewall_trusted could seriously
# degrade the level of protection provided by the firewall.
for i in ${IP_TRUST}; do
for i in ${ipfw_ip_trust}; do
ipfw add pass ip from ${i} to me
done
ipfw add 65000 count ip from any to any
# Drop packets to ports where we don't want logging
for p in ${PORTS_NOLOG}; do
for p in ${ipfw_ports_nolog}; do
ipfw add deny { tcp or udp } from any to any ${p} in
done
@ -138,7 +138,7 @@ start() {
ipfw add deny tcp from any 80,443 to any 1024-65535 in
# Deny and (if wanted) log the rest unconditionally.
if [ "${LOG_DENY}" = "yes" ]; then
if yesno ${ipfw_log_deny:-no}; then
log="log"
sysctl net.inet.ip.fw.verbose=1 >/dev/null
fi

View File

@ -23,14 +23,15 @@
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
name=${SVCNAME##*.}
if [ -n "${name}" -a "${name}" != "moused" ] ; then
device=/dev/"${name}"
pidfile=/var/run/moused-"${name}".pid
mouse=${SVCNAME##*.}
if [ -n "${name}" -a "${mouse}" != "moused" ] ; then
moused_device=/dev/"${mouse}"
pidfile=/var/run/moused-"${mouse}".pid
else
name=
pidfile=/var/run/moused.pid
fi
name="Console Mouse Daemon"
[ -n "${moused_device}" ] && name="${name} (${moused_device})"
depend() {
need localmount
@ -38,45 +39,38 @@ depend() {
}
start() {
ebegin "Starting the Console Mouse Daemon" "${name}"
ebegin "Starting ${name}"
if [ -z "${device}" ] ; then
if [ -z "${moused_device}" ] ; then
local dev=
for dev in /dev/psm[0-9]* /dev/ums[0-9]* ; do
[ -e "${dev}" ] || continue
[ -e /var/run/moused-$(basename "${dev}").pid ] && continue
device=${dev}
moused_device=${dev}
eindent
einfo "Using mouse on ${device}"
einfo "Using mouse on ${moused_device}"
eoutdent
break
done
fi
if [ -z "${device}" ] ; then
if [ -z "${moused_device}" ] ; then
eend 1 "No mouse device found"
return 1
fi
start-stop-daemon --start --exec /usr/sbin/moused \
--pidfile "${pidfile}" \
-- ${MOUSED_ARGS} -p "${device}" -I "${pidfile}"
-- ${moused_args} -p "${moused_device}" -I "${pidfile}"
local retval=$?
[ -n "${MOUSE_CHAR_START}" ] && MOUSE_CHAR_START="-M ${MOUSE_CHAR_START}"
local ttyv=
for ttyv in /dev/ttyv*; do
vidcontrol < "${ttyv}" ${MOUSE_CHAR_START} -m on
vidcontrol < "${ttyv}" -m on
: $((retval+= $?))
done
eend ${retval} "Failed to start moused"
}
stop() {
ebegin "Stopping the Console Mouse Daemon ${name}"
start-stop-daemon --quiet --stop --pidfile "${pidfile}"
eend $? "Failed to stop moused"
}
# vim: set ts=4 :

View File

@ -25,7 +25,7 @@
# SUCH DAMAGE.
command=/usr/sbin/powerd
command_args=${POWERD_ARGS}
command_args=${powerd_args}
pidfile=/var/run/powerd.pid
name="Power Control Daemon"
@ -36,10 +36,19 @@ depend() {
}
start_pre() {
if [ -n "${BATTERY_MODE}" ]; then
command_args="${command_args} -b ${BATTERY_MODE}"
if [ -n "${powerd_battery_mode}" ]; then
command_args="${command_args} -b ${powerd_battery_mode}"
fi
if [ -n "${AC_MODE}" ]; then
command_args="${command_args} -a ${AC_MODE}"
if [ -n "${powerd_ac_mode}" ]; then
command_args="${command_args} -a ${powerd_ac_mode}"
fi
}
stop_post()
{
local level=$(sysctl -n dev.cpu.0.freq_levels |
sed -e 's:/.*::')
if [ -n "${level}" ]; then
sysctl dev.cpu.0.freq="${level}" >/dev/null
fi
}

View File

@ -25,14 +25,15 @@
# SUCH DAMAGE.
command=/usr/sbin/rarpd
command_args="-f ${RARPD_ARGS}"
command_args="-f ${rarpd_args}"
pidfile=/var/run/rarpd.pid
name="Reverse ARP Daemon"
required_files="/etc/ethers"
if [ -z "${RARPD_INTERFACE}" ]; then
if [ -z "${rarpd_interface}" ]; then
command_args="${command_args} -a"
else
command_args="${command_args} ${RARPD_INTERFACE}"
command_args="${command_args} ${rarpd_interface}"
fi
command_background="YES"
@ -40,9 +41,9 @@ depend() {
need localmount
after bootmisc
if [ -z "${RARPD_INTERFACE}" ]; then
if [ -z "${rarpd_interface}" ]; then
need net
else
net net."${RARPD_INTERFACE}"
net net."${rarpd_interface}"
fi
}

View File

@ -25,7 +25,8 @@
depend() {
need localmount net
after $(ls -1 | grep -v local | xargs)
after *
before local
}
start() {

View File

@ -25,7 +25,7 @@
# SUCH DAMAGE.
command=/usr/sbin/rpcbind
command_args=${RPCBIND_ARGS}
command_args=${rpcbind_args}
name="RPC program number mapper"
depend() {

56
init.d.BSD/savecore Executable file
View File

@ -0,0 +1,56 @@
#!/sbin/runscript
# Copyright 1999-2007 Gentoo Foundation
# Copyright 2007 Roy Marples
# All rights reserved
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
description="Saves a kernel dump."
depend() {
need checkfs
before swap
}
start() {
local dump_dir=${dump_dir:-/var/crash}
if ! [ -d "${dump_dir}" ]; then
mkdir -p "${dump_dir}"
chmod 700 "${dump_dir}"
fi
if [ "${RC_UNAME}" = "FreeBSD" ] ; then
# Don't quote ${dump_device}, so that if it's unset,
# savecore will check on the partitions listed in fstab
# without errors in the output
savecore -C "${dump_dir}" ${dump_device} >/dev/null
else
ls "${dump_dir}"/bsd* > /dev/null 2>&1
fi
[ $? = 0 ] || return 0
local sopts="${dump_dir} ${dump_device}"
yesno ${dump_compress} && sopts="-z ${sopts}"
ebegin "Saving kernel core dump in ${dump_dir}"
savecore ${sopts} >/dev/null
eend $?
}

View File

@ -28,30 +28,29 @@ depend() {
}
start() {
if [ -n "${MODE}" ]; then
ebegin "Setting mode to ${MODE} for all screens"
if [ -n "${allscreen_flags}" ]; then
ebegin "Setting mode to ${allscreen_flags} for all screens"
for v in /dev/ttyv*; do
[ -c "${v}" ] || continue
vidcontrol "${MODE}" <"${v}"
vidcontrol ${allscreen_flags} <"${v}"
done
eend $?
fi
if [ -n "${KEYMAP}" ]; then
ebegin "Setting keymap to ${KEYMAP}"
kbdcontrol -l ${KEYMAP} </dev/console
if [ -n "${keymap}" ]; then
ebegin "Setting keymap to ${keymap}"
kbdcontrol -l ${keymap} </dev/console
eend $?
fi
if [ -n "${KEYRATE}" ]; then
ebegin "Setting keyrate to ${KEYRATE}"
kbdcontrol -r ${KEYRATE} </dev/console
if [ -n "${keyrate}" ]; then
ebegin "Setting keyrate to ${keyrate}"
kbdcontrol -r ${keyrate} </dev/console
eend $?
fi
if [ -n "${KEYCHANGE}" ]; then
if [ -n "${keychange}" ]; then
ebegin "Changing function keys"
eval set -- "${KEYCHANGE}"
eval set -- "${keychange}"
eindent
while [ $# -gt 0 ] ; do
veinfo "F$1 -> \`$2'"
@ -62,14 +61,14 @@ start() {
eoutdent
fi
if [ -n "${CURSOR}" ]; then
if [ -n "${cursor}" ]; then
ebegin "Setting cursor"
vidcontrol -c ${CURSOR}
vidcontrol -c ${cursor}
eend $?
fi
local v= f=
for v in FONT8x16 FONT8x14 FONT8x8; do
for v in font8x16 font8x14 font8x8; do
f=$(eval \$"${v}")
if [ -n "${f}" ]; then
ebegin "Setting font ${f}"
@ -78,25 +77,24 @@ start() {
fi
done
if [ -n "${BLANKTIME}" ]; then
if [ -n "${blanktime}" ]; then
ebegin "Setting blanktime"
vidcontrol -t ${BLANKTIME}
vidcontrol -t ${blanktime}
eend $?
fi
if [ -n "${SAVER}" ]; then
if [ -n "${saver}" ]; then
local i=
for i in $(kldstat | sed -n -e 's/.* \(splash_.*\)/\1/p'); do
kldunload "${i}"
done
kldstat -v | grep -q _saver || kldload ${SAVER}_saver
kldstat -v | grep -q _saver || kldload ${saver}_saver
fi
if [ -n "${KBDFLAGS}" ]; then
if [ -n "${kbdflags}" ]; then
ebegin "Setting keyboard flags for all screens"
for v in /dev/ttyv*; do
[ -c "${v}" ] || continue
kbdcontrol ${KBDFLAGS} <"${v}"
kbdcontrol ${kbdflags} <${v}
done
eend $?
fi

View File

@ -25,7 +25,7 @@
# SUCH DAMAGE.
command=/usr/sbin/syslogd
command_args=${SYSLOGD_ARGS}
command_args=${syslogd_args}
pidfile=/var/run/syslog.pid
name="System Logger Daemon"

108
init.d.Linux/procfs Normal file
View File

@ -0,0 +1,108 @@
#!/sbin/runscript
# Copyright 1999-2007 Gentoo Foundation
# Copyright 2007 Roy Marples
# All rights reserved
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
description="Mounts misc filesystems in /proc."
depend() {
need checkfs
}
start() {
# Make sure we insert usbcore if its a module
if [ -f /proc/modules -a ! -d /proc/bus/usb ]; then
modprobe -q usbcore
fi
[ -e /proc/filesystems ] || return 0
# Check what USB fs the kernel support. Currently
# 2.5+ kernels, and later 2.4 kernels have 'usbfs',
# while older kernels have 'usbdevfs'.
if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
local usbfs=$(grep -Fow usbfs /proc/filesystems ||
grep -Fow usbdevfs /proc/filesystems)
if [ -n "${usbfs}" ] ; then
ebegin "Mounting USB device filesystem (${usbfs})"
local usbgid="$(getent group usb | \
sed -e 's/.*:.*:\(.*\):.*/\1/')"
mount -t ${usbfs} \
-o ${usbgid:+devmode=0664,devgid=${usbgid},}noexec,nosuid \
usbfs /proc/bus/usb
eend $?
fi
fi
# Setup Kernel Support for the NFS daemon status
if [ -d /proc/fs/nfsd ] && ! mountinfo -q /proc/fs/nfsd ; then
if grep -qs nfsd /proc/filesystems ; then
ebegin "Mounting nfsd filesystem"
mount -t nfsd -o nodev,noexec,nosuid \
nfsd /proc/fs/nfsd
eend $?
fi
fi
# Setup Kernel Support for miscellaneous Binary Formats
if [ -d /proc/sys/fs/binfmt_misc ] && ! mountinfo -q /proc/sys/fs/binfmt_misc ; then
if grep -qs binfmt_misc /proc/filesystems ; then
ebegin "Mounting misc binary format filesystem"
mount -t binfmt_misc -o nodev,noexec,nosuid \
binfmt_misc /proc/sys/fs/binfmt_misc
eend $?
fi
fi
# Setup Kernel Support for securityfs
if [ -d /sys/kernel/security ] && ! mountinfo -q /sys/kernel/security ; then
if grep -qs securityfs /proc/filesystems ; then
ebegin "Mounting security filesystem"
mount -t securityfs securityfs /sys/kernel/security \
-o nodev,noexec,nosuid
eend $?
fi
fi
# Setup Kernel Support for debugfs
if [ -d /sys/kernel/debug ] && ! mountinfo -q /sys/kernel/debug ; then
if grep -qs debugfs /proc/filesystems ; then
ebegin "Mounting debug filesystem"
mount -t debugfs debugfs /sys/kernel/debug \
-o nodev,noexec,nosuid
eend $?
fi
fi
# Setup Kernel Support for SELinux
if [ -d /selinux ] && ! mountinfo -q /selinux ; then
if grep -qs selinuxfs /proc/filesystems ; then
ebegin "Mounting SELinux filesystem"
mount -t selinuxfs selinuxfs /selinux
eend $?
fi
fi
return 0
}

5
init.d.misc/Makefile Normal file
View File

@ -0,0 +1,5 @@
DIR = /etc/init.d
BIN = $(CONTENTS)
TOPDIR = ..
include $(TOPDIR)/default.mk

116
init.d.misc/named Normal file
View File

@ -0,0 +1,116 @@
#!/sbin/runscript
# Copyright 2007 Roy Marples
# All rights reserved
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
command=/usr/sbin/named
command_args=${named_args}
pidfile=/var/run/named/pid
name="Domain Name server"
extra_commands="reload"
namedb=/etc/namedb
named_uid=${named_uid:-bind}
depend() {
provide dns
need localmount
after bootmisc
}
start_pre() {
if [ -n "${named_chroot}" ]; then
# Create (or update) the chroot directory structure
if [ -r /etc/mtree/BIND.chroot.dist ]; then
mtree -deU -f /etc/mtree/BIND.chroot.dist -p "${named_chroot}"
else
ewarn "/etc/mtree/BIND.chroot.dist missing,"
ewarn "chroot directory structure not updated"
fi
if [ ! -d "${named_chroot}"/. ]; then
eerror "chroot directory ${named_chroot} missing"
exit 1
fi
# Create /etc/namedb symlink
if [ ! -L "${namedb}" ]; then
if [ -d "${namedb}" ]; then
ewarn "named chroot: ${namedb} is a directory!"
elif [ -e "${namedb}" ]; then
ewarn "named chroot: ${namedb} exists!"
else
ln -s "${named_chroot}${namedb}" "${namedb}"
fi
else
# Make sure it points to the right place.
ln -shf "${named_chroot}${namedb}" "${namedb}"
fi
case "${RC_UNAME}" in
*BSD|DragonFly)
# Mount a devfs in the chroot directory if needed
umount "${named_chroot}"/dev 2>/dev/null
mount -t devfs dev "${named_chroot}"/dev
devfs -m "${named_chroot}"/dev ruleset devfsrules_hide_all
devfs -m "${named_chroot}"/dev rule apply path null unhide
devfs -m "${named_chroot}"/dev rule apply path random unhide
;;
esac
# Copy local timezone information if it is not up to date.
if [ -r /etc/localtime ]; then
cmp -s /etc/localtime "${named_chroot}/etc/localtime" ||
cp -p /etc/localtime "${named_chroot}/etc/localtime"
fi
command_args="${command_args} -t ${named_chroot}"
ln -fs "${named_chroot}${pidfile}" "${pidfile}"
fi
if [ ! -s "${named_chroot}${namedb}/rndc.conf" ]; then
local confgen="${command%/named}/rndc-confgen -a -b256 -u ${named_uid} \
-c ${named_chrootdir}/etc/namedb/rndc.key"
if [ -s "${named_chroot}${namedb}/rndc.key" ]; then
local getuser="stat -f%Su"
[ "${RC_UNAME}" = "Linux" ] && getuser="stat -c%U"
case $(${getuser} "${named_chroot}${namedb}"/rndc.key) in
root|"${named_uid}") ;;
*) ${confgen} ;;
esac
else
${confgen}
fi
fi
}
reload() {
rndc reload
}
stop_post() {
if [ -n "${named_chroot}" -a -c "${named_chroot}"/dev/null ]; then
umount "${named_chroot}"/dev 2>/dev/null || true
fi
}

59
init.d.misc/ntpd Normal file
View File

@ -0,0 +1,59 @@
#!/sbin/runscript
# Copyright 2007 Roy Marples
# All rights reserved
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
ntpd_config=${ntpd_config:-/etc/ntp.conf}
ntpd_drift=${ntpd_drift:-/var/db/ntpd.drift}
command=/usr/sbin/ntpd
pidfile=/var/run/ntpd.pid
command_args="${ntpd_args} -c ${ntpd_config} -f ${ntpd_drift} -p ${pidfile}"
name="Network Time Protocol Daemon"
depend() {
use dns
need localmount
after bootmisc ntp-client
}
start_pre() {
if [ ! -r "${ntpd_config}" ]; then
eerror "${ntpd_config} is not readable"
exit 1
fi
if [ -n "${ntpd_chroot}" ]; then
case "${RC_UNAME}" in
*BSD|DragonFly)
if [ ! -c "${ntpd_chroot}/dev/clockctl" ]; then
rm -f "${ntpd_chroot}/dev/clockctl"
(cd /dev; /bin/pax -rw -pe clockctl "${ntpd_chroot}/dev")
fi
;;
esac
ln -fs "${ntpd_chroot}${ntpd_drift}" "${ntpd_drift}"
command_args="${command_args} -u ntpd:ntpd -i ${ntpd_chroot}"
fi
}

View File

@ -36,7 +36,7 @@ cleanup_tmp_dir() {
mkdir -p "${dir}"
cd "${dir}"
if [ "${WIPE_TMP}" = "yes" ]; then
if [ "${wipe_tmp}" = "yes" ]; then
ebegin "Wiping ${dir} directory"
local startopts="-x . -depth"
[ "${RC_UNAME}" = "Linux" ] && startopts=". -xdev -depth"
@ -116,7 +116,7 @@ start() {
# Clean up /tmp directories
local tmp=
for tmp in ${WIPE_TMP_DIRS-/tmp}; do
for tmp in ${wipe_tmp_dirs-/tmp}; do
cleanup_tmp_dir "${tmp}"
done
chmod +t /tmp /var/tmp

View File

@ -63,7 +63,7 @@ do_checkfs() {
ewend 1 "Operational error, continuing"
retval=0
else
if [ "${RC_FORCE_AUTO}" = "yes" ] ; then
if yesno ${rc_force_auto:-${RC_FORCE_AUTO}}; then
eend 2 "Fsck could not correct all errors, rerunning"
fsck ${opts} -y ${parts}
retval=$?
@ -87,7 +87,9 @@ start() {
stop() {
# fsck on shutdown if we need to
[ "${FSCK_SHUTDOWN}" = "yes" -a ! -f /forcefsck ] && do_checkfs
if yesno "${fsck_shutdown:-${FSCK_SHUTDOWN}}"; then
[ ! -f /forcefsck ] && do_checkfs
fi
return 0
}

View File

@ -100,7 +100,7 @@ do_fsck() {
retval=0
elif [ ${retval} -eq 2 -o ${retval} -eq 3 ] ; then
ewend 1 "Filesystem repaired, but reboot needed!"
if [ "${RC_FORCE_AUTO}" != "yes" ] ; then
if ! yesno ${rc_force_auto:-${RC_FORCE_AUTO}}; then
printf "\a"; sleep 1; printf "\a"; sleep 1
printf "\a"; sleep 1; printf "\a"; sleep 1
ewarn "Rebooting in 10 seconds ..."
@ -109,7 +109,7 @@ do_fsck() {
einfo "Rebooting"
reboot -f
else
if [ "${RC_FORCE_AUTO}" = "yes" ] ; then
if yesno ${rc_force_auto:-${RC_FORCE_AUTO}}; then
eend 2 "Rerunning fsck in force mode"
fsck ${opts} -y "${root}"
retval=$?
@ -128,7 +128,6 @@ do_fsck() {
reboot -f
fi
fi
}
start() {

View File

@ -26,6 +26,7 @@
. /etc/init.d/functions.sh
. "${RC_LIBDIR}"/sh/rc-functions.sh
[ -r /etc/rc.conf ] && . /etc/rc.conf
# Support LiveCD foo
if [ -r /sbin/livecd-functions.sh ] ; then
@ -93,7 +94,7 @@ if [ "${RC_UNAME}" = "Linux" ] ; then
. "${RC_LIBDIR}"/sh/rc-mount.sh
eindent
fs=
for x in ${RC_NET_FS_LIST} ; do
for x in ${net_fs_list} ; do
fs="${fs}${fs:+|}${x}"
done
[ -n "${fs}" ] && fs="^(${fs})$"

View File

@ -31,13 +31,9 @@ depend() {
}
start() {
if [ -f /etc/hostname ] ; then
ewarn "You should stop using /etc/hostname and use /etc/conf.d/hostname"
HOSTNAME=$(cat /etc/hostname)
fi
ebegin "Setting hostname to ${HOSTNAME}"
hostname "${HOSTNAME}"
hostname=${hostname-${HOSTNAME-localhost}}
ebegin "Setting hostname to ${hostname}"
hostname "${hostname}"
eend $? "Failed to set the hostname"
}

View File

@ -25,8 +25,6 @@
# SUCH DAMAGE.
description="Mounts disks and swap according to /etc/fstab."
[ -e /proc/filessystems ] && description="${description} Also mounts various filesystems in /proc."
[ -x /sbin/dumpon ] && description="${description} Also configures saving kernel dumps to swap."
depend() {
need checkfs
@ -35,7 +33,7 @@ depend() {
start() {
# Mount local filesystems in /etc/fstab.
local types="noproc" x=
for x in ${RC_NET_FS_LIST} ; do
for x in ${net_fs_list}; do
types="${types},${x}"
done
@ -43,122 +41,6 @@ start() {
mount -at "${types}"
eend $? "Some local filesystem failed to mount"
if [ -x /sbin/savecore ] ; then
local dumpdir=${KERNEL_DUMP_DIR:-/var/crash}
if ! [ -d "${dumpdir}" ]; then
mkdir -p "${dumpdir}"
chmod 700 "${dumpdir}"
fi
if [ "${RC_UNAME}" = "FreeBSD" ] ; then
# Don't quote ${KERNEL_DUMP_DEVICE}, so that if it's unset,
# savecore will check on the partitions listed in fstab
# without errors in the output
savecore -C "${dumpdir}" ${KERNEL_DUMP_DEVICE} >/dev/null
else
ls "${dumpdir}"/bsd* > /dev/null 2>&1
fi
if [ $? = 0 ] ; then
local sopts="${dumpdir} ${KERNEL_DUMP_DEVICE}"
[ "${KERNEL_DUMP_COMPRESS}" = "yes" ] && sopts="-z ${sopts}"
ebegin "Saving kernel core dump in" "${dumpdir}"
savecore ${savecoreopts} >/dev/null
eend $?
fi
fi
# Sync bootlog now as /var should be mounted
if type bootlog >/dev/null 2>/dev/null ; then
bootlog sync 2>/dev/null
fi
# Make sure we insert usbcore if its a module
if [ -f /proc/modules -a ! -d /proc/bus/usb ] ; then
modprobe -q usbcore
fi
if [ -e /proc/filesystems ] ; then
# Check what USB fs the kernel support. Currently
# 2.5+ kernels, and later 2.4 kernels have 'usbfs',
# while older kernels have 'usbdevfs'.
if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ] ; then
local usbfs=$(grep -Fow usbfs /proc/filesystems ||
grep -Fow usbdevfs /proc/filesystems)
if [ -n "${usbfs}" ] ; then
ebegin "Mounting USB device filesystem (${usbfs})"
local usbgid="$(getent group usb | \
sed -e 's/.*:.*:\(.*\):.*/\1/')"
mount -t ${usbfs} \
-o ${usbgid:+devmode=0664,devgid=${usbgid},}noexec,nosuid \
usbfs /proc/bus/usb
eend $?
fi
fi
# Setup Kernel Support for the NFS daemon status
if [ -d /proc/fs/nfsd ] && ! mountinfo -q /proc/fs/nfsd ; then
if grep -qs nfsd /proc/filesystems ; then
ebegin "Mounting nfsd filesystem"
mount -t nfsd -o nodev,noexec,nosuid \
nfsd /proc/fs/nfsd
eend $?
fi
fi
# Setup Kernel Support for miscellaneous Binary Formats
if [ -d /proc/sys/fs/binfmt_misc ] && ! mountinfo -q /proc/sys/fs/binfmt_misc ; then
if grep -qs binfmt_misc /proc/filesystems ; then
ebegin "Mounting misc binary format filesystem"
mount -t binfmt_misc -o nodev,noexec,nosuid \
binfmt_misc /proc/sys/fs/binfmt_misc
eend $?
fi
fi
# Setup Kernel Support for securityfs
if [ -d /sys/kernel/security ] && ! mountinfo -q /sys/kernel/security ; then
if grep -qs securityfs /proc/filesystems ; then
ebegin "Mounting security filesystem"
mount -t securityfs securityfs /sys/kernel/security \
-o nodev,noexec,nosuid
eend $?
fi
fi
# Setup Kernel Support for debugfs
if [ -d /sys/kernel/debug ] && ! mountinfo -q /sys/kernel/debug ; then
if grep -qs debugfs /proc/filesystems ; then
ebegin "Mounting debug filesystem"
mount -t debugfs debugfs /sys/kernel/debug \
-o nodev,noexec,nosuid
eend $?
fi
fi
# Setup Kernel Support for SELinux
if [ -d /selinux ] && ! mountinfo -q /selinux ; then
if grep -qs selinuxfs /proc/filesystems ; then
ebegin "Mounting SELinux filesystem"
mount -t selinuxfs selinuxfs /selinux
eend $?
fi
fi
fi
# We do our swapping here instead of rc so we can get urandom started
# before us for people that like an encrypted swap.
ebegin "Activating (possible) swap"
swapon -a >/dev/null
eend 0 # If swapon has nothing todo it errors, so always return 0
# Setup any user requested dump device
if [ -x /sbin/dumpon -a -n "${KERNEL_DUMP_DEVICE}" ] ; then
ebegin "Activating kernel core dump device" "(${KERNEL_DUMP_DEVICE})"
dumpon "${KERNEL_DUMP_DEVICE}"
eend $?
fi
# Always return 0 - some local mounts may not be critical for boot
return 0
}
@ -170,12 +52,10 @@ stop() {
# We never unmount / or /dev or $RC_SVCDIR
local x= no_umounts="/|/dev|/dev/.*|${RC_SVCDIR}"
# NO_UMOUNTS is taken from /etc/conf.d/localmount
# RC_NO_UMOUNTS is taken from /etc/conf.d/rc and can also be
# set by plugins
# RC_NO_UMOUNTS is an env var that can be set by plugins
OIFS=${IFS} SIFS=${IFS-y}
IFS=$IFS:
for x in ${NO_UMOUNTS} ${RC_NO_UMOUNTS} ; do
for x in ${no_umounts} ${RC_NO_UMOUNTS}; do
no_umounts="${no_umounts}|${x}"
done
if [ "${SIFS}" = "y" ] ; then
@ -198,22 +78,6 @@ stop() {
cd "${RC_SVCDIR}"
umount -a -t tmpfs 2>/dev/null
# As we're turning off swap below, we need to disable kernel dumps
[ -x /sbin/dumpon ] && dumpon off
local swap_list=
# Turn off swap
if [ -r /proc/swaps ] ;then
swap_list=$(sed -e '1d' /proc/swaps)
else
swap_list=$(swapctl -l 2>/dev/null | sed -e '1d')
fi
if [ -n "${swap_list}" ] ; then
ebegin "Deactivating swap"
swapoff -a >/dev/null
eend $?
fi
. "${RC_LIBDIR}"/sh/rc-mount.sh
# Umount loopback devices
@ -228,7 +92,7 @@ stop() {
einfo "Unmounting filesystems"
eindent
local fs=
for x in ${RC_NET_FS_LIST} ; do
for x in ${net_fs_list}; do
fs="${fs}${fs:+|}${x}"
done
[ -n "${fs}" ] && fs="^(${fs})$"

View File

@ -59,7 +59,7 @@ start() {
[ -x /etc/init.d/rpcbind ] && pmap="rpcbind"
local x= fs=
for x in ${RC_NET_FS_LIST}; do
for x in ${net_fs_list}; do
case "${x}" in
nfs|nfs4)
# If the nfsmount script took care of the nfs filesystems,
@ -89,7 +89,7 @@ stop() {
ebegin "Unmounting network filesystems"
. "${RC_LIBDIR}/sh/rc-mount.sh"
for x in ${RC_NET_FS_LIST} ; do
for x in ${net_fs_list} ; do
fs="${fs}${fs:+,}${x}"
done
if [ -n "${fs}" ]; then
@ -98,7 +98,7 @@ stop() {
eindent
fs=
for x in ${RC_NET_FS_LIST}; do
for x in ${net_fs_list}; do
fs="${fs}${fs:+|}${x}"
done
[ -n "${fs}" ] && fs="^(${fs})$"

40
init.d/swap Normal file
View File

@ -0,0 +1,40 @@
#!/sbin/runscript
# Copyright 2007 Roy Marples
# All rights reserved
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
depend() {
need localmount
}
start() {
ebegin "Activating swap"
swapon -a >/dev/null
eend 0 # If swapon has nothing todo it errors, so always return 0
}
stop() {
ebegin "Deactivating swap"
swapoff -a >/dev/null
eend 0
}

View File

@ -24,7 +24,7 @@
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
URANDOM_SEED=${URANDOM_SEED:-/var/run/random-seed}
urandom_seed=${urandom_seed:-${URANDOM_SEED:-/var/run/random-seed}}
description="Initializes the random number generator."
@ -41,22 +41,19 @@ save_seed() {
( # sub shell to prevent umask pollution
umask 077
dd if=/dev/urandom of="${URANDOM_SEED}" count=${poolsize} 2>/dev/null
dd if=/dev/urandom of="${urandom_seed}" count=${poolsize} 2>/dev/null
)
}
start() {
[ -c /dev/urandom ] || return
if [ -f "${URANDOM_SEED}" ] ; then
cat "${URANDOM_SEED}" > /dev/urandom
fi
if ! rm -f "${URANDOM_SEED}" ; then
ewarn "Skipping ${URANDOM_SEED} initialization (ro root?)"
return 0
fi
if [ -f "${urandom_seed}" ] ; then
ebegin "Initializing random number generator"
save_seed
cat "${urandom_seed}" > /dev/urandom
eend $? "Error initializing random number generator"
fi
rm -f "${urandom_seed}" && save_seed
return 0
}
stop() {

View File

@ -1,4 +1,4 @@
BOOT = net.lo0 syscons
BOOT = dumpon net.lo0 savecore syscons
DEFAULT = local.rc powerd syslogd
TOPDIR = ..

View File

@ -1,4 +1,4 @@
BOOT = consolefont keymaps modules net.lo
BOOT = consolefont keymaps modules net.lo procfs
DEFAULT = hdparm
TOPDIR = ..

View File

@ -1,4 +1,4 @@
BOOT = bootmisc checkroot checkfs clock hostname localmount rmnologin sysctl urandom
BOOT = bootmisc checkroot checkfs clock hostname localmount rmnologin swap sysctl urandom
DEFAULT = local netmount
LEVELDIR = $(DESTDIR)/etc/runlevels

View File

@ -47,7 +47,7 @@ mount_svcdir() {
cp -p "${RC_SVCDIR}"/deptree "${RC_SVCDIR}"/depconfig \
"${RC_SVCDIR}"/nettree "${RC_LIBDIR}"/tmp 2>/dev/null
fi
try mdconfig -a -t malloc -s "${RC_SVCSIZE:-1024}"k -u 0
try mdconfig -a -t malloc -s "${rc_svcsize:-1024}"k -u 0
try newfs -b 4096 -i 1024 -n /dev/md0
try mount -o rw,noexec,nosuid /dev/md0 "${RC_SVCDIR}"
if ${dotmp} ; then
@ -60,6 +60,7 @@ mount_svcdir() {
. "${RC_LIBDIR}"/sh/init-functions.sh
. "${RC_LIBDIR}"/sh/functions.sh
[ -r /etc/rc.conf ] && . /etc/rc.conf
# Disable devd until we need it
[ "${RC_UNAME}" = "FreeBSD" ] && sysctl hw.bus.devctl_disable=1 >/dev/null

View File

@ -66,8 +66,8 @@ mount_svcdir() {
devtmp="/dev/ram1"
fs="ext2"
for x in ${devdir} ${devtmp}; do
try dd if=/dev/zero of="${x}" bs=1k count="${svcsize}"
try mkfs -t "${fs}" -i 1024 -vm0 "${x}" "${svcsize}"
try dd if=/dev/zero of="${x}" bs=1k count="${rc_svcsize:-1024}"
try mkfs -t "${fs}" -i 1024 -vm0 "${x}" "${rc_svcsize:-1024}"
done
else
echo
@ -99,12 +99,12 @@ mount_svcdir() {
fi
}
_RC_GET_KV_CACHE=""
_rc_get_kv_cache=""
get_KV() {
[ -z "${_RC_GET_KV_CACHE}" ] \
[ -z "${_rc_get_kv_cache}" ] \
&& _RC_GET_KV_CACHE="$(uname -r)"
echo "$(KV_to_int "${_RC_GET_KV_CACHE}")"
echo "$(KV_to_int "${_rc_get_kv_cache}")"
return $?
}
@ -112,12 +112,13 @@ get_KV() {
. /etc/init.d/functions.sh
. "${RC_LIBDIR}"/sh/init-functions.sh
. "${RC_LIBDIR}"/sh/rc-functions.sh
[ -r /etc/rc.conf ] && . /etc/rc.conf
# Set the console loglevel to 1 for a cleaner boot
# the logger should anyhow dump the ring-0 buffer at start to the
# logs, and that with dmesg can be used to check for problems
if [ -n "${RC_DMESG_LEVEL}" -a "${RC_SYS}" != "VPS" ]; then
dmesg -n "${RC_DMESG_LEVEL}"
if [ -n "${dmesg_level}" -a "${RC_SYS}" != "VPS" ]; then
dmesg -n "${dmesg_level}"
fi
check_statedir /proc
@ -192,14 +193,14 @@ fi
# - check boot parameters
# - make sure the required binaries exist
# - make sure the kernel has support
if [ "${RC_DEVICES}" = "static" -o "${RC_SYS}" = "VPS" ]; then
if [ "${rc_devices}" = "static" -o "${RC_SYS}" = "VPS" ]; then
ebegin "Using existing device nodes in /dev"
eend 0
elif [ "${RC_UNAME}" = "GNU/kFreeBSD" ]; then
ebegin "Using kFreeBSD devfs in /dev"
eend 0
else
case ${RC_DEVICES} in
case ${rc_devices} in
devfs) managers="devfs udev mdev";;
udev) managers="udev devfs mdev";;
mdev) managers="mdev udev devfs";;
@ -235,7 +236,7 @@ for x in "devpts /dev/pts 0755 ,gid=5,mode=0620" "tmpfs /dev/shm 1777 ,nodev"; d
mountinfo -q "$2" && continue
if [ ! -d "$2" ] && \
[ "${devfs}" = "yes" -o "${udev}" = "yes" ]; then
[ "${m}" = "devfs" -o "${m}" = "udev" ]; then
mkdir -m "$3" -p "$2" >/dev/null 2>/dev/null || \
ewarn "Could not create $2!"
fi

View File

@ -1,5 +1,5 @@
DIR = $(RC_LIB)/sh
CONF = functions.sh init-functions.sh init-common-post.sh \
INC = functions.sh init-functions.sh init-common-post.sh \
rc-functions.sh rc-mount.sh
BIN = gendepends.sh net.sh rc-mount.sh rc-help.sh runscript.sh

View File

@ -77,12 +77,12 @@ for SVCNAME in * ; do
depend
# Add any user defined depends
config ${RC_CONFIG}
need ${RC_NEED}
use ${RC_USE}
before ${RC_BEFORE}
after ${RC_AFTER}
provide ${RC_PROVIDE}
config ${rc_config} ${RC_CONFIG}
need ${rc_need} ${RC_NEED}
use ${rc_use} ${RC_USE}
before ${rc_before} ${RC_BEFORE}
after ${rc_after} ${RC_AFTER}
provide ${rc_provide} ${RC_PROVIDE}
fi
)
done

View File

@ -63,9 +63,13 @@ check_statedir() {
#splash "critical" &
echo
eerror "To function properly, \"$1\" needs to exist."
if yesno ${RC_FORCE_AUTO}; then
if yesno ${rc_force_auto:-${RC_FORCE_AUTO}}; then
eerror "Attempting to create \"$1\" for you ..."
if [ "${RC_UNAME}" = "Linux" ]; then
mount -o remount,rw /
else
mount -u -o rw /
fi
mkdir -p "$1"
fi
if [ ! -d "$1" ] ; then

View File

@ -45,6 +45,7 @@ stop_addon() {
( import_addon "$1-stop" )
}
net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
is_net_fs() {
[ -z "$1" ] && return 1
@ -54,7 +55,7 @@ is_net_fs() {
# Fall back on fs types
local t=$(mountinfo --fstype "$1")
for x in ${RC_NET_FS_LIST}; do
for x in ${net_fs_list}; do
[ "${x}" = "${t}" ] && return 0
done
return 1

View File

@ -146,7 +146,7 @@ if yesno ${BE_VERBOSE}; then
printf "
${CYAN}Dependencies:${OFF}
This is the heart of the Gentoo RC-Scripts, as it determines the order
This is the heart of the OpenRC, as it determines the order
in which services gets started, and also to some extend what services
get started in the first place.
@ -252,9 +252,7 @@ printf "
"
fi
printf " /etc/conf.d/rc
/etc/conf.d/rc.\${RC_SOFTLEVEL}
/etc/conf.d/${SERVICE}
printf " /etc/conf.d/${SERVICE}
/etc/conf.d/${SERVICE}.\${RC_SOFTLEVEL}
/etc/rc.conf
\${RC_SOFTLEVEL} denotes the name of the runlevel"
@ -263,8 +261,8 @@ if yesno ${BE_VERBOSE}; then
printf "
You can add extra dependencies to ${SERVICE} by adding some variables to
/etc/conf.d/${SERVICE}
RC_NEED=\"openvpn ntpd\"
RC_USE=\"dns\"
rc_need=\"openvpn ntpd\"
rc_use=\"dns\"
This makes ${SERVICE} need openvpn and ntpd, while it just uses dns.

View File

@ -59,18 +59,18 @@ describe() {
done
}
yesno ${RC_DEBUG} && set -x
yesno ${rc_debug} && set -x
# If we're net.eth0 or openvpn.work then load net or openvpn config
rc_c=${SVCNAME%%.*}
if [ -n "${rc_c}" -a "${rc_c}" != "${SVCNAME}" ]; then
if [ -e "/etc/conf.d/${rc_c}.${RC_SOFTLEVEL}" ]; then
. "/etc/conf.d/${rc_c}.${RC_SOFTLEVEL}"
elif [ -e "/etc/conf.d/${rc_c}" ]; then
. "/etc/conf.d/${rc_c}"
_c=${SVCNAME%%.*}
if [ -n "${_c}" -a "${_c}" != "${SVCNAME}" ]; then
if [ -e "/etc/conf.d/${_c}.${RC_SOFTLEVEL}" ]; then
. "/etc/conf.d/${_c}.${RC_SOFTLEVEL}"
elif [ -e "/etc/conf.d/${_c}" ]; then
. "/etc/conf.d/${_c}"
fi
fi
unset rc_c
unset _c
# Overlay with our specific config
if [ -e "/etc/conf.d/${SVCNAME}.${RC_SOFTLEVEL}" ]; then
@ -83,7 +83,7 @@ fi
[ -e /etc/rc.conf ] && . /etc/rc.conf
# Apply any ulimit defined
[ -n "${RC_ULIMIT}" ] && ulimit ${RC_ULIMIT}
[ -n "${rc_ulimit:-${RC_ULIMIT}}" ] && ulimit ${rc_ulimit:-${RC_ULIMIT}}
# Load our script
. $1
@ -128,10 +128,10 @@ fi
while [ -n "$1" ]; do
# See if we have the required function and run it
for rc_x in describe start stop ${extra_commands:-${opts}}; do
if [ "${rc_x}" = "$1" ]; then
for _cmd in describe start stop ${extra_commands:-${opts}}; do
if [ "${_cmd}" = "$1" ]; then
if type "$1" >/dev/null 2>&1; then
unset rc_x
unset _cmd
if type "$1"_pre >/dev/null 2>&1; then
"$1"_pre || exit $?
fi
@ -142,7 +142,7 @@ while [ -n "$1" ]; do
shift
continue 2
else
if [ "${rc_x}" = "start" -o "${rc_x}" = "stop" ]; then
if [ "${_cmd}" = "start" -o "${_cmd}" = "stop" ]; then
exit 0
else
eerror "${SVCNAME}: function \`$1' defined but does not exist"

View File

@ -205,7 +205,7 @@ int fstabinfo (int argc, char **argv)
}
/* No point in outputting if quiet */
if (rc_env_bool ("RC_QUIET"))
if (rc_yesno (getenv ("RC_QUIET")))
continue;
switch (output) {

View File

@ -32,33 +32,28 @@
#include "librc.h"
bool rc_env_bool (const char *var)
bool rc_yesno (const char *value)
{
char *v;
if (! var)
return (false);
if (! (v = getenv (var))) {
errno = ENOENT;
if (! value) {
errno = EINVAL;
return (false);
}
if (strcasecmp (v, "true") == 0 ||
strcasecmp (v, "y") == 0 ||
strcasecmp (v, "yes") == 0 ||
strcasecmp (v, "1") == 0)
if (strcasecmp (value, "yes") == 0 ||
strcasecmp (value, "y") == 0 ||
strcasecmp (value, "true") == 0 ||
strcasecmp (value, "1") == 0)
return (true);
if (strcasecmp (v, "false") != 0 &&
strcasecmp (v, "n") != 0 &&
strcasecmp (v, "no") != 0 &&
strcasecmp (v, "0") != 0)
if (strcasecmp (value, "no") != 0 &&
strcasecmp (value, "n") != 0 &&
strcasecmp (value, "false") != 0 &&
strcasecmp (value, "0") != 0)
errno = EINVAL;
return (false);
}
librc_hidden_def(rc_env_bool)
librc_hidden_def(rc_yesno)
char *rc_strcatpaths (const char *path1, const char *paths, ...)
{

View File

@ -81,7 +81,6 @@ librc_hidden_proto(rc_deptree_load)
librc_hidden_proto(rc_deptree_order)
librc_hidden_proto(rc_deptree_update)
librc_hidden_proto(rc_deptree_update_needed)
librc_hidden_proto(rc_env_bool)
librc_hidden_proto(rc_find_pids)
librc_hidden_proto(rc_runlevel_exists)
librc_hidden_proto(rc_runlevel_get)
@ -123,5 +122,6 @@ librc_hidden_proto(rc_strlist_delete)
librc_hidden_proto(rc_strlist_free)
librc_hidden_proto(rc_strlist_join)
librc_hidden_proto(rc_strlist_reverse)
librc_hidden_proto(rc_yesno)
#endif

View File

@ -365,6 +365,7 @@ int mountinfo (int argc, char **argv)
char *n;
int opt;
int result;
bool quiet;
#define DO_REG(_var) \
if (_var) free (_var); \
@ -442,12 +443,13 @@ int mountinfo (int argc, char **argv)
rc_strlist_reverse (nodes);
result = EXIT_FAILURE;
quiet = rc_yesno (getenv ("RC_QUIET"));
STRLIST_FOREACH (nodes, n, i) {
if (point_regex && regexec (point_regex, n, 0, NULL, 0) != 0)
continue;
if (skip_point_regex && regexec (skip_point_regex, n, 0, NULL, 0) == 0)
continue;
if (! rc_env_bool ("RC_QUIET"))
if (! quiet)
printf ("%s\n", n);
result = EXIT_SUCCESS;
}

View File

@ -150,7 +150,7 @@ void rc_logger_open (const char *level)
if (! isatty (STDOUT_FILENO))
return;
if (! rc_env_bool ("RC_LOGGER"))
if (! rc_conf_yesno ("rc_logger"))
return;
if (pipe (signal_pipe) == -1)

View File

@ -38,6 +38,7 @@
#endif
#include <sys/utsname.h>
#include <ctype.h>
#include <limits.h>
#include <stdio.h>
#include <stdlib.h>
@ -50,10 +51,49 @@
#define PROFILE_ENV "/etc/profile.env"
#define SYS_WHITELIST RC_LIBDIR "/conf.d/env_whitelist"
#define USR_WHITELIST "/etc/conf.d/env_whitelist"
#define RC_CONFIG "/etc/conf.d/rc"
#define RC_CONF "/etc/rc.conf"
#define RC_CONF_OLD "/etc/conf.d/rc"
#define PATH_PREFIX RC_LIBDIR "/bin:/bin:/sbin:/usr/bin:/usr/sbin"
static char **rc_conf = NULL;
static void _free_rc_conf (void)
{
rc_strlist_free (rc_conf);
}
bool rc_conf_yesno (const char *setting)
{
if (! rc_conf) {
char *line;
int i;
rc_conf = rc_config_load (RC_CONF);
atexit (_free_rc_conf);
/* Support old configs */
if (exists (RC_CONF_OLD)) {
char **old = rc_config_load (RC_CONF_OLD);
rc_strlist_join (&rc_conf, old);
rc_strlist_free (old);
}
/* Convert old uppercase to lowercase */
STRLIST_FOREACH (rc_conf, line, i) {
char *p = line;
while (p && *p && *p != '=') {
if (isupper (*p))
*p = tolower (*p);
p++;
}
}
}
return (rc_yesno (rc_config_value (rc_conf, setting)));
}
char **env_filter (void)
{
char **env = NULL;
@ -64,10 +104,10 @@ char **env_filter (void)
bool got_path = false;
char *env_var;
int env_len;
char *p;
char *token;
char *sep;
char *e;
char *p;
int pplen = strlen (PATH_PREFIX);
whitelist = rc_config_list (SYS_WHITELIST);
@ -195,45 +235,14 @@ char **env_config (void)
char **env = NULL;
char *line;
int i;
char *p;
char **config;
char *e;
#ifdef __linux__
char sys[6];
#endif
struct utsname uts;
bool has_net_fs_list = false;
FILE *fp;
char buffer[PATH_MAX];
char *runlevel = rc_runlevel_get ();
/* Don't trust environ for softlevel yet */
snprintf (buffer, PATH_MAX, "%s.%s", RC_CONFIG, runlevel);
if (exists (buffer))
config = rc_config_load (buffer);
else
config = rc_config_load (RC_CONFIG);
STRLIST_FOREACH (config, line, i) {
p = strchr (line, '=');
if (! p)
continue;
*p = 0;
e = getenv (line);
if (! e) {
*p = '=';
rc_strlist_add (&env, line);
} else {
int len = strlen (line) + strlen (e) + 2;
char *new = xmalloc (sizeof (char) * len);
snprintf (new, len, "%s=%s", line, e);
rc_strlist_add (&env, new);
free (new);
}
}
rc_strlist_free (config);
/* One char less to drop the trailing / */
i = strlen ("RC_LIBDIR=") + strlen (RC_LIBDIR) + 1;
line = xmalloc (sizeof (char) * i);
@ -304,21 +313,6 @@ char **env_config (void)
#endif
/* Only add a NET_FS list if not defined */
STRLIST_FOREACH (env, line, i)
if (strncmp (line, "RC_NET_FS_LIST=", strlen ("RC_NET_FS_LIST=")) == 0) {
has_net_fs_list = true;
break;
}
if (! has_net_fs_list) {
i = strlen ("RC_NET_FS_LIST=") + strlen (RC_NET_FS_LIST_DEFAULT) + 1;
line = xmalloc (sizeof (char) * i);
snprintf (line, i, "RC_NET_FS_LIST=%s", RC_NET_FS_LIST_DEFAULT);
rc_strlist_add (&env, line);
free (line);
}
/* Some scripts may need to take a different code path if Linux/FreeBSD, etc
To save on calling uname, we store it in an environment variable */
if (uname (&uts) == 0) {

View File

@ -64,9 +64,6 @@
/* Max buffer to read a line from a file */
#define RC_LINEBUFFER 4096
/* Good defaults just incase user has none set */
#define RC_NET_FS_LIST_DEFAULT "afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
#define ERRX fprintf (stderr, "out of memory\n"); exit (1)
static inline void *xmalloc (size_t size)
@ -113,6 +110,7 @@ static inline bool exists (const char *pathname)
return (stat (pathname, &buf) == 0);
}
bool rc_conf_yesno (const char *var);
char **env_filter (void);
char **env_config (void);

View File

@ -82,7 +82,7 @@ static void print_service (char *service)
} else
snprintf (status, sizeof (status), " stopped ");
if (isatty (fileno (stdout)) && ! rc_env_bool ("RC_NOCOLOR"))
if (isatty (fileno (stdout)) && ! rc_yesno (getenv ("RC_NOCOLOR")))
printf ("\n");
ebracket (cols, color, status);
}

View File

@ -185,7 +185,7 @@ int rc_update (int argc, char **argv)
}
}
verbose = rc_env_bool ("RC_VERBOSE");
verbose = rc_yesno (getenv ("RC_VERBOSE"));
if ((action & DOSHOW && action != DOSHOW) ||
(action & DOADD && action != DOADD) ||

View File

@ -492,6 +492,8 @@ static char read_key (bool block)
static bool want_interactive (void)
{
char c;
static bool gotinteractive;
static bool interactive;
if (PREVLEVEL &&
strcmp (PREVLEVEL, "N") != 0 &&
@ -499,7 +501,11 @@ static bool want_interactive (void)
strcmp (PREVLEVEL, "1") != 0)
return (false);
if (! rc_env_bool ("RC_INTERACTIVE"))
if (! gotinteractive) {
gotinteractive = true;
interactive = rc_conf_yesno ("rc_interactive");
}
if (! interactive)
return (false);
c = read_key (false);
@ -793,6 +799,7 @@ int main (int argc, char **argv)
int opt;
DIR *dp;
struct dirent *d;
bool parallel;
atexit (cleanup);
if (argv[0])
@ -982,7 +989,7 @@ int main (int argc, char **argv)
ecolor (ECOLOR_GOOD), ecolor (ECOLOR_BRACKET),
ecolor (ECOLOR_NORMAL));
if (rc_env_bool ("RC_INTERACTIVE"))
if (rc_conf_yesno ("rc_interactive"))
printf ("Press %sI%s to enter interactive boot mode\n\n",
ecolor (ECOLOR_GOOD), ecolor (ECOLOR_NORMAL));
@ -1156,7 +1163,7 @@ int main (int argc, char **argv)
if (newlevel && strcmp (newlevel, bootlevel) == 0 &&
(strcmp (runlevel, RC_LEVEL_SINGLE) == 0 ||
strcmp (runlevel, RC_LEVEL_SYSINIT) == 0) &&
rc_env_bool ("RC_COLDPLUG"))
rc_conf_yesno ("rc_coldplug"))
{
#if defined(__DragonFly__) || defined(__FreeBSD__)
/* The net interfaces are easy - they're all in net /dev/net :) */
@ -1263,6 +1270,8 @@ int main (int argc, char **argv)
if (going_down)
rc_runlevel_set (newlevel);
parallel = rc_conf_yesno ("rc_parallel");
/* Now stop the services that shouldn't be running */
STRLIST_FOREACH (stop_services, service, i) {
bool found = false;
@ -1278,7 +1287,7 @@ int main (int argc, char **argv)
/* We always stop the service when in these runlevels */
if (going_down) {
pid_t pid = rc_service_stop (service);
if (pid > 0 && ! rc_env_bool ("RC_PARALLEL"))
if (pid > 0 && ! parallel)
rc_waitpid (pid);
continue;
}
@ -1348,7 +1357,7 @@ int main (int argc, char **argv)
if ((pid = rc_service_stop (service)) > 0) {
add_pid (pid);
if (! rc_env_bool ("RC_PARALLEL")) {
if (! parallel) {
rc_waitpid (pid);
remove_pid (pid);
}
@ -1448,7 +1457,7 @@ interactive_option:
if ((pid = rc_service_start (service)) > 0) {
add_pid (pid);
if (! rc_env_bool ("RC_PARALLEL")) {
if (! parallel) {
rc_waitpid (pid);
remove_pid (pid);
}

View File

@ -353,12 +353,12 @@ char **rc_config_load (const char *file);
/*! Return the value of the entry from a key=value list. */
char *rc_config_value (char **list, const char *entry);
/*! Check if an environment variable is a boolean and return it's value.
/*! Check if a variable is a boolean and return it's value.
* If variable is not a boolean then we set errno to be ENOENT when it does
* not exist or EINVAL if it's not a boolean.
* @param variable to check
* @return true if it matches true, yes or 1, false if otherwise. */
bool rc_env_bool (const char *variable);
bool rc_yesno (const char *variable);
/*! @name String List functions
* Handy functions for dealing with string arrays of char **.

View File

@ -9,7 +9,6 @@ global:
rc_deptree_order;
rc_deptree_update;
rc_deptree_update_needed;
rc_env_bool;
rc_environ_fd;
rc_find_pids;
rc_runlevel_exists;
@ -52,6 +51,7 @@ global:
rc_strlist_free;
rc_strlist_join;
rc_strlist_reverse;
rc_yesno;
local:
*;

View File

@ -590,7 +590,7 @@ static void svc_start (bool deps)
state = rc_service_state (service);
if (rc_env_bool ("IN_HOTPLUG") || in_background) {
if (rc_yesno (getenv ("IN_HOTPLUG")) || in_background) {
if (! state & RC_SERVICE_INACTIVE &&
! state & RC_SERVICE_STOPPED)
exit (EXIT_FAILURE);
@ -615,7 +615,7 @@ static void svc_start (bool deps)
hook_out = RC_HOOK_SERVICE_START_OUT;
rc_plugin_run (RC_HOOK_SERVICE_START_IN, applet);
if (rc_env_bool ("RC_DEPEND_STRICT"))
if (rc_conf_yesno ("rc_depend_strict"))
depoptions |= RC_DEP_STRICT;
if (rc_runlevel_starting ())
@ -651,7 +651,7 @@ static void svc_start (bool deps)
STRLIST_FOREACH (use_services, svc, i)
if (rc_service_state (svc) & RC_SERVICE_STOPPED) {
pid_t pid = rc_service_start (svc);
if (! rc_env_bool ("RC_PARALLEL"))
if (! rc_conf_yesno ("rc_parallel"))
rc_waitpid (pid);
}
}
@ -805,7 +805,7 @@ static void svc_stop (bool deps)
state & RC_SERVICE_FAILED)
exit (EXIT_FAILURE);
if (rc_env_bool ("IN_HOTPLUG") || in_background)
if (rc_yesno (getenv ("IN_HOTPLUG")) || in_background)
if (! (state & RC_SERVICE_STARTED) &&
! (state & RC_SERVICE_INACTIVE))
exit (EXIT_FAILURE);
@ -833,7 +833,7 @@ static void svc_stop (bool deps)
char *svc;
int i;
if (rc_env_bool ("RC_DEPEND_STRICT"))
if (rc_conf_yesno ("RC_DEPEND_STRICT"))
depoptions |= RC_DEP_STRICT;
if (rc_runlevel_stopping ())
@ -859,7 +859,7 @@ static void svc_stop (bool deps)
svcs & RC_SERVICE_INACTIVE)
{
pid_t pid = rc_service_stop (svc);
if (! rc_env_bool ("RC_PARALLEL"))
if (! rc_conf_yesno ("rc_parallel"))
rc_waitpid (pid);
rc_strlist_add (&tmplist, svc);
}
@ -1087,7 +1087,7 @@ int runscript (int argc, char **argv)
setenv ("RC_RUNSCRIPT_PID", pid, 1);
/* eprefix is kinda klunky, but it works for our purposes */
if (rc_env_bool ("RC_PARALLEL")) {
if (rc_conf_yesno ("rc_parallel")) {
int l = 0;
int ll;
@ -1137,13 +1137,13 @@ int runscript (int argc, char **argv)
/* Save the IN_BACKGROUND env flag so it's ONLY passed to the service
that is being called and not any dependents */
if (getenv ("IN_BACKGROUND")) {
in_background = rc_env_bool ("IN_BACKGROUND");
ibsave = xstrdup (getenv ("IN_BACKGROUND"));
in_background = rc_yesno (ibsave);
unsetenv ("IN_BACKGROUND");
}
if (rc_env_bool ("IN_HOTPLUG")) {
if (! rc_env_bool ("RC_HOTPLUG") || ! rc_service_plugable (applet))
if (rc_yesno (getenv ("IN_HOTPLUG"))) {
if (! rc_conf_yesno ("rc_hotplug") || ! rc_service_plugable (applet))
eerrorx ("%s: not allowed to be hotplugged", applet);
}
@ -1197,7 +1197,7 @@ int runscript (int argc, char **argv)
const char *t[] = { optarg, NULL };
const char *s[] = { applet, NULL };
if (rc_env_bool ("RC_DEPEND_STRICT"))
if (rc_conf_yesno ("rc_depend_strict"))
depoptions |= RC_DEP_STRICT;
if (! deptree && ((deptree = _rc_deptree_load ()) == NULL))

View File

@ -708,8 +708,8 @@ int start_stop_daemon (int argc, char **argv)
case_RC_COMMON_GETOPT
}
quiet = rc_env_bool ("RC_QUIET");
verbose = rc_env_bool ("RC_VERBOSE");
quiet = rc_yesno (getenv ("RC_QUIET"));
verbose = rc_yesno (getenv ("RC_VERBOSE"));
/* Allow start-stop-daemon --signal HUP --exec /usr/sbin/dnsmasq
* instead of forcing --stop --oknodo as well */