If CONFIG_SWAP is turned off in the kernel, this file may not exist. In
that case, we should not try to read from it.
reported-by: <walter@pratyeka.org>
X-Gentoo-Bug: 430378
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=430378
The OpenRC upstream default network stack was changed, but there was no
reason to change it. Now since we have the MKNET build switch, it is
easy for the gentoo ebuild to install oldnet by default.
The upstream default is newnet.
The MKNET variable can be used to select the network stack you want to
build and install with OpenRC.
The current default is the gentoo "oldnet" stack. If you want to install
the OpenRC newnet stack, use MKNET=newnet on the make command line.
This reverts commit 5994e55937.
There are situations where these scripts can be useful, so I am bringing
them back. Also, I want to start discussions about simplifying the
OpenRC network stack.
On linux systems, fsck was not taking into account which filesystems
were local or remote. This commit adds the -t option, with an
appropriate value, to the fsck call so that remote file systems are not
checked.
reported-by: Vladimir Berezhnoy <non7top@gmail.com>
X-Gentoo-Bug: 408363
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=408363
Make the stop function in localmount only unmount file systems when the
system is going down.
reported-by: Alexey Prokopchuk <alexpro@homelan.lg.ua>
X-Gentoo-Bug: 407167
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=407167
The -q option is not implemented by BusyBox, so instead of using that, make
it so that the standard error is caught, but standard output is thrown
away.
Note: the ordered behaviour of redirection is part of POSIX so we should be
on the safe side with this change, as first we duplicate the output
descriptor to be used as stderr, then we change the output descriptor to
point to NULL.
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
This reverts commit 06d6701785.
After researching this further, we do need this commit. The other issue
is a bug in fstabinfo which will also need to be fixed.
There are several reasons for going back to this:
- fstabinfo doesn't work with labels in fstab
- when a device is passed to swapon individually, the swap priority from
fstab is not honored.
- We also add the -e option to only activate available swap devices.
reported-by: Duncan <1i5t5.duncan@cox.net>
X-Gentoo-Bug: 405021
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=405021
I was informed that "provide net" should mean that there is network
communication outside the local computer. In this case, the loopback
interface can't "provide net", but there needs to be a way for other
processes to know that the loopback interface is active.
To this end, this commit makes the loopback "provide lo" and all other
interfaces "provide net".
Previously, the default on linux systems was to not set the hardware
clock to match the system clock during shutdown.
This changes that default to be consistent with *bsd and swclock.
The clock_hctosys and clock_systohc settings really do not have anything
to do with running an ntp daemon, so remove that reference from the
documentation.
Reported-by: Milos Ivanovic <milosivanovic@orcon.net.nz>
X-Gentoo-Bug: 401433
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401433
Modify the swap script so it starts before and stops after localmount.
Also, on linux, this script should skip mounting swap on loopback.
Add a swapfiles script which runs after localmount and is designed to
activate additional swap space which could not be activated before
localmount was run. This includes loopback swap on linux and swapfiles
which are on local file systems that were not mounted when swap was
activated initially.
The start code does reactivate swap that is already active, but this is
not an error condition.
Reported-by: Giampaolo Tomassoni <giampaolo@tomassoni.biz>
X-Gentoo-Bug: 401003
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401003
This allows root to be removed from the boot runlevel which is needed
sometimes when the root fs is mounted read-only.
Reported-By: Maxim Kammerer <mk@dee.su>
X-Gentoo-Bug: 400921
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400921
This was modified by William Hubbs to use the checkpath helper and to
improve readability.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
(tested with genkernel /usr mount changes);
This reverts commit 6d5a2d5f9e.
There are interfaces, such as adsl and ppp interfaces which need to be
brought down. Also, the WOL setting is a good case for bringingdown
interfaces.
This is based on a patch submitted by the reporter; however, there was
another mount command which needed -n as well so it was added to the
patch.
Reported-by: Ben Kohler <bkohler@gmail.com>
X-Gentoo-Bug: 400967
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400967
We need to make sure this directory is a mount point before we add the
control groups.
Reported-by: Andrej Filipcic <andrej.filipcic@ijs.si>
X-Gentoo-Bug: 400903
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400903
Baselayout-1.x used to have a DELAYLOGIN option where it would setup
/etc/nologin automatically and then delete it later on. OpenRC did
not keep that feature, and during the rewrites, ended up just punting
it all the time. This isn't what we intended, so drop the rm.
X-Gentoo-Bug: 400837
X-Gentoo-Bug-URL: https://bugs.gentoo.org/400837
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
In the case of a single line of configuration, where the address has
parameters, the parameters were being treated as seperate addresses.
Eg:
config_eth0="4321:0:1:2:3:4:567:89ab/64 nodad home preferred_lft 0"
Also document usage of parameters in the net example, and note that
multiple addresses on a single line cannot be mixed with parameters.
Newlines are required to seperate the addresses.
X-Gentoo-Bug: 398827
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=398827
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The program function in depend blocks is now able to search paths by
itself. If passed multiple arguments or multiple calls, at least one of
the arguments passed must be a program or a shell builtin (eg ip built
into busybox). If a qualified path is specified, only that path will be
checked, otherwise it will be checked as a builtin, then $PATH will be
checked for the named binary (via type).
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Some of the networking tools, such as iproute2, can be stored in one of
several locations. This function gives us a standard way to find these
tools.
I would like to thankRobin Johnson <robbat2@gentoo.org> for his input on
this function.
Historically, we have tried to up interfaces before running preup, so
that the kernel setups up the device and makes things like ethtool work
(some hardware cannot be correct probed until then). However this ends
up breaking other hardware, so a variable has been introduced to allow
the up prior to preup to be disabled: up_before_preup_IFVAR=no
X-Gentoo-Bug: 389475
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389475
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Currently, cgroups are still in development, so we are not setting them
up by default. However, this default will be changed in the future.
This commit message and patch were updated by
William Hubbs <williamh@gentoo.org>.
X-Gentoo-Bug: 395079
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395079
The linux kernel documentation suggests mounting a separate cgroup
hierarchy for each subsystem you want to control/monitor. This changes
the cgroups mounting code to do this.
This is needed to allow auto-connect at boot.
Reported-by: David J Cozatt <ygdrasil@comcast.net>
X-Gentoo-Bug: 390955
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=390955
The migrate-run service was hanging when parallel startup was enabled
because of its dependencies. This integrates the logic for this service
into bootmisc, which will avoid the issues with parallel startup.
I would like to thank Robin H. Johnson <robbat2@gentoo.org> for his
input on this patch
Previous commit e3b39a677b missed adding a "[" to one of the tests.
Reported-by: Torsten Veller <tove@gentoo.org>
x-Gentoo-Bug: 391941
x-Gentoo-Bug-URL: http://bugs.gentoo.org/391941
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Openrc will create a cgroup hierarchy called openrc which will have all
services it starts and all subsystems attached to it. If you need other
groups/hierarchies, please use libcgroup.
The kernel documentation states that a cgroup file system should not be
mounted here, but a tmpfs.
This also means that we should not create a group for each process, but
we should allow the user to specify which group a process should be
assigned to. The rc_cgroup variable will be used for this purpose.
For more information, see /usr/src/linux/Documentation/cgroups/cgroups.txt.
These scripts are not supported, and they have several major design
issues such as not being able to stop, start or allow a dependency on a
single interface.
The tree contained many operating system specific Makefiles which were
being included in other Makefiles. This commit removes those and adds
the code to the makefiles which included them using make's conditional
processing.
X-Gentoo-Bug: 387441
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=387441
A new helper function (_array_helper) since both, the _flatten_array and
_get_array function share partially the same code.
We also reduce multiple whitespace to a single space, remove leading newlines
as well as skipping "empty" lines.
This makes the data returned by _{flatten,get}_array much nicer than before.
It also fixes bug 366677 where net-tools having trouble with the whitespace
mentioned above. iproute2 was not affected.
Reported-by: Andrew Maltsev <am@ejelta.com>
X-Gentoo-Bug: 366677
X-Gentoo-Bug-URL: https://bugs.gentoo.org/366677
The dedicated nfs init.d script takes care of mounting this when
necessary, and we want it there since mounting it isn't terribly
useful if you can't actually start up the nfs daemons (which the
nfs-utils package provides).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This is a KISS version. Let's see where we go from here in terms of
complexity. Maybe nowhere!
X-Gentoo-Bug: 382723
X-Gentoo-Bug-URL: https://bugs.gentoo.org/382723
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This patch fixes the regex pattern for /lib -> /lib(32|64)?
as well as the pattern for RC_SVCDIR if it contains /lib(32|64)?/.
This fixes bug 381783.
X-Gentoo-Bug: 381783
X-Gentoo-Bug-URL: https://bugs.gentoo.org/381783
Note by william hubbs:
I modified the patch to compare "null" and "noop" with $1 instead of
${config}.
Reported-by: Yun Zheng Hu <hu@fox-it.com>
X-Gentoo-Bug: 379577
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=379577
If $RC_SVCDIR/shutdowntime does not exist, we need a default reference
file. It is safe to use @PREFIX@/sbin/runscript for this purpose.
Reported-By: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 376249
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=376249
/etc/mtab can be a link to a file in /proc. If it is, we should not
attempt to update /etc/mtab.
The original test used "! -w" as part of the test. This does not
work since everything is writeable by root.
Thanks to Robin Johnson for the suggestion of using readlink -f and the
regular expression.
Reported-By: junkmailnotread@yahoo.com
X-Gentoo-Bug: 370037
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=370037
Currently, we allow the use of bash arrays for some configuration settings.
This is undocumented, so I want to remove the support from openrc.
The first phase of this removal will be this commit which adds warnings
to encourage people not to use bash arrays.
X-Gentoo-Bug: 374875
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=374875
The extra_net_fs_list variable was not being included as it should have
been for the net file systems because it was being expanded before it
was set by the user.
X-Gentoo-Bug: 374133
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=374133
The version iteration code missed certain combinations:
KV=1.2.3.4
skips: 1.2.3, 1
KV=1.2.3
skips: 1
Simplify the code to use a loop and build the list of versions directly
instead of unique variables per version component.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
