If the kernel is NFS-booting, it is critical that we don't down the
slave interfaces when we activate the bond. To do so will break the root
filesystem when networking is temporarily lost.
Reported-by: Walter <walter@pratyeka.org>
X-Gentoo-Bug: 428604
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=428604
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The 'dev' argument is only optional for ethX devices, for others it is
mandatory, so we should always include it.
Also tweak when promisc mode is applied to bridges.
Patches submitted by Denis Kaganovich <mahatma@bspu.unibel.by>.
X-Gentoo-Bug: #431204
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=431204
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
We were not testing for carrier correctly when testing for ipv6
tentative addresses.
Reported-by: <ast@domdv.de>
X-Gentoo-Bug: 433012
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=433012
sysfs needs to be available before we can check interfaces. On udev
systems this was not a problem, but with mdev/static-dev, there is no
other need for sysfs until later in the init.
X-Gentoo-Bug: 410701
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=410701
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
On linux systems running >=linux-3.2, the /proc/net/dev file cannot be
relied on to show the order network interfaces were added to the system.
Also, there is currently a bug in the implementation of the seek call
for this file which can cause a system to go into an infinite loop.
This commit changes the _ifindex function to retreive the value of
/sys/class/net/${IFACE}/ifindex and use that value instead of attempting
to calculate one from the interface's position in /proc/net/dev.
reported-by: John Keeping <john.keeping@lineone.net>
X-Gentoo-Bug: 410127
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=410127
The location of the ifconfig binary has changed in
net-tools-1.60_p20120127084908, and if we do not check both locations
for it, the user will get errors like:
_is_wireless: command not found
_exists: command not found
X-Gentoo-Bug: 407757
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=407757
The previous bonding change of ensuring interfaces were down to add
slave interfaces, but it clobbered the IFACE variable, because it was
being passed to a bash function rather than a command.
X-Gentoo-Bug: 400613
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400613
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
I missed removing a call to the old ethtool function wrapper that was
made unneeded by commit d02d3af02.
X-Gentoo-Bug: 399037
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=399037
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Allow users to shorten iproute arguments to the shortest unique argument
that will match a flag of iproute2.
X-Gentoo-Bug: 398721
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=398721
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The program function in depend blocks is now able to search paths by
itself. If passed multiple arguments or multiple calls, at least one of
the arguments passed must be a program or a shell builtin (eg ip built
into busybox). If a qualified path is specified, only that path will be
checked, otherwise it will be checked as a builtin, then $PATH will be
checked for the named binary (via type).
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
This reverts commit f583030e3c.
The previous commit did not account for the case of not having iproute2
installed.
Reported-by: Duncan <1i5t5.duncan@cox.net>
X-Gentoo-Bug: 397875
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=397875
This test is incorrect, and we do not need the modprobe. If macvlan is a
module, it is automatically modprobed when the first macvlan link is
added. Also, the /sys directory referred to in the test does not exist
if macvlan is built into the kernel.
Reported-by: Marien Zwart <marienz@gentoo.org>
X-Gentoo-Bug: 396427
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=396427
During stop of an interface, if it has been removed already (eg
hotunplug), not existing is fine.
X-Gentoo-Bug: 395859
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395859
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Since commit 683a21b0a in Feburary 2011, iproute2 has been required for
new VLAN configuration. MACVLAN is also impossible to configure without
iproute2. However we did not check if iproute2 was actually in the
modules for a given interface, so it could end up hanging or giving
weird errors. Check for iproute2 before usage now.
X-Gentoo-Bug: 389437
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389437
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
We need to create interfaces of custom names before we can sucessfully
start them. To do this, we have to add tunnels during prestart instead
of start. Split up the ip6to4 script to do this, saving the computed
variables for use in start with the new service data commands.
X-Gentoo-Bug: 372575
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=372575
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Broadcast and IPv6 should not be used together. Do not try to set the
keyword for auto-generation of the broadcast address. If the user passes
a broadcast address for IPv6, throw an error.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Several of the optional flags were not being handled correctly, they
were being passed as values only, without the keyword before them.
Affected keywords: anycast, label, scope, valid_lft, preferred_lft
Also change the handling of keywords to a common setup now, making
broadcast and peer strings the same as the above keywords.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
For creation of routing policy entries for IPv6, the family must be
explicitly specified to 'ip'.
X-Gentoo-Bug: 385833
X-Gentoo-Bug-URL: https://bugs.gentoo.org/385833
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Fix minor shell typo that broke setting mtu on vlans.
X-Gentoo-Bug: 392971
X-Gentoo-Bug-URL: https://bugs.gentoo.org/392971
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
This patch was modified by William Hubbs <williamh@gentoo.org> to
document the new usage in net.example.
X-Gentoo-Bug: 394281
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=394281
Provide consistent methods using iproute2/ifconfig to check operational
and administrative up/down state of interfaces. This is not the same as
ethtool's "Link detected" field, which is the state of the layer 2
medium.
TODO: How to check operational state in BSD?
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The old ifenslave binary forcibly set new slave interface to down before
adding into the kernel, as a way of show it's version to the kernel. We
need to duplicate this so that the kernel doesn't think it's an old
ifenslave version using the bonding setup interface.
X-Gentoo-Bug: 391881
X-Gentoo-Bug-URL: https://bugs.gentoo.org/391881
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Thanks-to: Yun Zheng Hu <hu@fox-it.com>
Some variable references were written as $(foo), but the majority were
written as ${foo}. This commit changes all of the variable references
to using braces.
