Commit Graph

62 Commits

Author SHA1 Message Date
William Hubbs
32c506a4c8 Drop rc_sys definition from build system 2012-02-20 20:13:11 -06:00
William Hubbs
8199dee8d6 Revert "Remove rc_parallel from rc.conf"
This reverts commit 695f3886fb.

Reported-by: Pacho Ramos <pacho@gentoo.org>
X-Gentoo-Bug: 400741
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400741
2012-02-13 11:29:19 -06:00
William Hubbs
982ac38f35 cgroups: hide configure option to turn off cgroups
Turning off the default cgroups is possible, but these groups are the
recommended setup from the kernel, so turning them off is highly
discouraged.
2012-01-05 22:29:37 -06:00
Piotr Karbowski
3e2001f6a2 add rc_cgroup option to allow disabling of cgroup default setup
Currently, cgroups are still in development, so we are not setting them
up by default. However, this default will be changed in the future.

This commit message and patch were updated by
William Hubbs <williamh@gentoo.org>.

X-Gentoo-Bug: 395079
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395079
2011-12-20 01:14:08 -06:00
William Hubbs
695f3886fb Remove rc_parallel from rc.conf
rc_parallel has never been considered a stable feature of openrc. To
that end, I am removing the documentation for this feature from
rc.conf.

It is still available, but bugs against it are not considered stable
blockers, and it should only be used currently by developers and users
who are willing to test the feature.

X-Gentoo-Bug: 391945
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=391945
2011-11-26 17:33:10 -06:00
William Hubbs
d8bbeb184f CGroups: create the openrc cgroup hierarchy
Openrc will create a cgroup hierarchy called openrc which will have all
services it starts and all subsystems attached to it. If you need other
groups/hierarchies, please use libcgroup.
2011-11-20 14:07:46 -06:00
William Hubbs
0bbb764f70 Change RC_CGROUP to lower case 2011-11-17 16:42:03 -06:00
Patrick Lauer
20df56f0b2 Add CGroup support
X-Gentoo-Bug: 390297
X-Gentoo-Bug: http://bugs.gentoo.org/show_bug.cgi?id=390297
2011-11-17 16:22:59 -06:00
Mike Frysinger
9a539ebbe1 further clean up OS differences in makefiles
No need for if() logic.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-20 14:32:37 -05:00
William Hubbs
9c77502f96 Make variable references in Makefiles consistent
Some variable references were written as $(foo), but the majority were
written as ${foo}. This commit changes all of the variable references
to using braces.
2011-10-19 12:22:23 -05:00
William Hubbs
ecf77254bb consolodate Makefiles
The tree contained many operating system specific Makefiles which were
being included in other Makefiles. This commit removes those and adds
the code to the makefiles which included them using make's conditional
processing.

X-Gentoo-Bug: 387441
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=387441
2011-10-18 03:23:00 -05:00
William Hubbs
fe6cd23287 rc_log_path should be quoted 2011-07-06 18:38:52 -05:00
Christian Ruppert
05e3251467 Rename rc_logger_path to rc_log_path 2011-07-06 21:16:15 +02:00
Christian Ruppert
48dcc55b65 Document the new rc_logger_path option 2011-07-06 00:47:15 +02:00
Mike Frysinger
d0bc4f20ad drop useless "All rights reserved" notice
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-29 19:46:31 -04:00
William Hubbs
372bae3213 make rc_sys system specific
This rearranges the configuration files so it is more clear that the
rc_sys setting is system specific.

X-Gentoo-Bug: 363957
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=363957
2011-04-18 14:42:02 -05:00
William Hubbs
c9912942f0 update documentation for rc_sys
Originally the plan was to deprecate this code, but this will not be
happening. There are some subsystems which can still be autodetected, so
we are keeping this code and allowing users to override the automatic
detection with this variable as well as set it to other subtypes we
cannot autodetect.

X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
2011-03-21 23:04:08 -05:00
Mike Frysinger
d7e48fe643 rc_sys: let default behavior be automagic
The default rc_sys behavior was changed to always require manual
intervention by users.  This pretty much breaks all of the diff
system variants out there if people don't explicitly edit their
rc.conf file ahead of time.  We should have things work "out of
the box" as much as possible and reasonable.

X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/357247
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-14 20:35:08 -05:00
William Hubbs
0f3d6a01c7 remove references to the migration guide
The openrc code base is not gentoo specific, so I feel that we should
not refer to the migration guide in the comments inside the configuration
files.
2011-03-05 00:11:24 -06:00
William Hubbs
3fca6bd027 allow default rc_sys value to be set at build time
This allows the default value of rc_sys to be set when openrc is
compiled. This will allow openrc to be installed, e.g. on vserver guests
and will allow them to be rebooted without the need to edit rc.conf.

This patch is a combined effort between myself and Robin Johnson.

X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
2011-03-05 00:04:06 -06:00
William Hubbs
202fa20cbc fix typo 2011-03-03 15:06:39 -06:00
Mike Frysinger
faa2df1159 more whitespace cleanup
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-01-17 04:49:12 -05:00
Robin H. Johnson
b113ad49e9 Bug #351783: more documentation for rc_sys. But really see the OpenRC migration guide where this is covered. 2011-01-16 22:48:10 +00:00
William Hubbs
882a4b7d69 bug 351523: fix deprecation date for rc_sys
The deprecation notice for automatic detection of the system type stated
that the automatic detection will be removed no later than 2010/03/01,
but it should state 2011/03/01.
2011-01-13 10:37:45 -06:00
Robin H. Johnson
09f990a7c8 Implement explicit selection of subsystem types.
- Fixes bugs #347583, #349389, both of which were triggered by cgroups
  being detected as the LXC subsystem type.
- Makes it much easier to select "prefix" type.
- "rc -S" will now print a warning if you have not configured rc_sys in
  /etc/rc.conf
- All other semantics of rc_sys are unchanged in this patch.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-01-05 22:09:34 -08:00
William Hubbs
39776d6fb7 update documentation for rc_interactive
rc_interactive is automatically disabled if rc_parallel is set to YES.
Update the documentation in rc.conf to reflect this.
This fixes bug #327305.
2010-11-01 13:57:22 -05:00
William Hubbs
d8a76d1bf6 allow net_fs_list to be extended but not replaced
This fixes bug #342825.
2010-10-27 09:00:02 -05:00
Mike Frysinger
ecf9ef49a7 random spelling fixes
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-01-08 22:02:51 +00:00
Roy Marples
a4b03ead79 Add lustre 2009-10-15 23:48:40 +01:00
Roy Marples
0ffe5caf18 Add more net fs's, Gentoo #284327. 2009-10-11 08:18:35 +01:00
Roy Marples
658a220638 Add (c) to Copyright 2009-05-01 15:11:40 +01:00
Roy Marples
b70501ef45 Go back to git 2009-04-30 15:05:39 +01:00
Roy Marples
338c93733d Fix the nstop keyword. 2009-04-27 09:06:30 +00:00
Roy Marples
77c8f8abbb Use /bin/bash or user shell in /etc/passwd if none set before /bin/sh. 2009-04-26 17:57:06 +00:00
Roy Marples
c07b384d82 Don't drop to sulogin by default, but make this configurable. 2009-04-24 11:49:55 +00:00
Roy Marples
e7b35a8f15 Allow rc to start (optionally stop) crashed services, #120 2009-04-24 07:03:08 +00:00
Roy Marples
bb6614f4e1 Document rc_nostop, #118 2009-04-19 10:25:38 +00:00
Roy Marples
2c98c5326a Punt .gitignore files. 2008-12-04 12:12:09 +00:00
Roy Marples
0af7d5bc20 Add a new shutdown runlevel, Gentoo #224537.
Split halt.sh into halt, killprocs, romount and savecache services.
The reboot runlevel is removed but mapped to shutdown.
The halt script should be moved to the sysvinit package.
2008-11-03 15:31:01 +00:00
Roy Marples
1c73f2967c We no longer hotplug by default. 2008-10-30 15:03:12 +00:00
Roy Marples
0d98d56188 Remove sysvinit specific code.
The runlevels shutdown, reboot, sysinit and single should be called by
init(8) and shutdown(8) and not manually.
sysvinit users will have to add sulogin to their inittab to secure the
console.
2008-10-27 18:01:03 +00:00
Roy Marples
50b8aba8d9 Remove coldplug and just have hotplug which is a list of allowed/disallowed services. Makes things much easier. 2008-10-10 09:08:59 +00:00
Roy Marples
d6da8e8c48 sysinit is now a real runlevel that handles things like udev, dmesg and
mounting various bits in /dev and /sys.
init.sh JUST mounts /lib/rc/init.d (and /proc for Linux systems)
To make development of this easier we now return an empty RC_STRINGLIST
instead of a NULL for empty things.

If you don't have a udev init script installed, don't reboot your box OR
roll back to an older OpenRC version.
2008-10-10 08:37:21 +00:00
Roy Marples
c3e192a834 Stop ssd from waiting by default - most daemons are good now. 2008-09-26 23:58:57 +00:00
Roy Marples
223015920c Warn about parallel still locking the system. 2008-09-18 13:59:05 +00:00
Roy Marples
b271ac5af5 Fix install of rc and rc.shutdown on the BSD's. 2008-03-27 09:33:20 +00:00
Roy Marples
864e17fabc Ignore more files. 2008-03-26 17:34:23 +00:00
Roy Marples
55eb3794fb Rework our folder structure so that we don't have OS specific dirs, making it easier to share init and conf files per OS. 2008-03-25 14:06:05 +00:00
Roy Marples
a689b66023 Add tunable SYSCONFDIR 2008-03-05 12:27:11 +00:00
Roy Marples
cf567c844f Remove rc_force_auto as users can now specify -y in fsck_args. 2008-01-31 17:18:39 +00:00