Commit Graph

2156 Commits

Author SHA1 Message Date
Christian Ruppert
8dcb7554ee Use RC_LEVEL_SHUTDOWN 2011-12-29 03:16:53 +01:00
Christian Ruppert
b754a27f62 Remove useless rc_runlevel_get() call
The current runlevel will be passed to rc_logger_open() already.
2011-12-29 03:08:29 +01:00
Christian Ruppert
ec65f181ea Don't print error when the logfile isn't writeable during shutdown
The logfile or its basedir may be read-only during shutdown because the
directory may be umounted or read-only remounted already. In this case we simply
skip this error.
This is related to a comment in bug 390645 but the initial bug is not fixed
through this commit.

X-Gentoo-Bug: 390645
X-Gentoo-Bug-URL: https://bugs.gentoo.org/390645
2011-12-29 02:50:24 +01:00
Robin H. Johnson
b12cb2f507 net/iproute2: POSIX sh compatability: ${x/a/b} invalid
The ${x/a/b} shell construct is NOT defined in the POSIX specification,
it's a bash addition.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-28 20:32:10 +00:00
William Hubbs
1875db4ff6 net: document up_before_preup for BSD 2011-12-28 11:17:58 -06:00
William Hubbs
26ceddae5e net: clean up documentation for up_before_preup 2011-12-28 10:41:07 -06:00
William Hubbs
20f612080c net: use yesno to test up_before_preup 2011-12-27 17:59:39 -06:00
Robin H. Johnson
5615325a84 net/vlan: Fix prestop when device was hard-removed already
During stop of an interface, if it has been removed already (eg
hotunplug), not existing is fine.

X-Gentoo-Bug: 395859
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395859
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26 17:56:26 -08:00
Robin H. Johnson
537171eac2 Fix whitespace.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26 17:51:28 -08:00
Robin H. Johnson
415f480410 net/vlan, net/macvlan: iproute2 is required for new VLAN configuration
Since commit 683a21b0a in Feburary 2011, iproute2 has been required for
new VLAN configuration. MACVLAN is also impossible to configure without
iproute2. However we did not check if iproute2 was actually in the
modules for a given interface, so it could end up hanging or giving
weird errors. Check for iproute2 before usage now.

X-Gentoo-Bug: 389437
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389437
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26 17:22:29 -08:00
Robin H. Johnson
acf77b73af net/ip6to4: Split to use pre_start and start so that other tunnel names work.
We need to create interfaces of custom names before we can sucessfully
start them. To do this, we have to add tunnels during prestart instead
of start. Split up the ip6to4 script to do this, saving the computed
variables for use in start with the new service data commands.

X-Gentoo-Bug: 372575
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=372575
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26 17:08:27 -08:00
Robin H. Johnson
9a01f68515 net: Add up_before_preup variable for CAN devices
Historically, we have tried to up interfaces before running preup, so
that the kernel setups up the device and makes things like ethtool work
(some hardware cannot be correct probed until then). However this ends
up breaking other hardware, so a variable has been introduced to allow
the up prior to preup to be disabled: up_before_preup_IFVAR=no

X-Gentoo-Bug: 389475
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389475
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-26 16:27:38 -08:00
Robin H. Johnson
7b1c1e1623 net/iproute2: Confirmed that broadcast and peer can be used together.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-21 08:10:47 +00:00
Robin H. Johnson
8bb4b759eb net/iproute2: IPv6 cannot be used with broadcast
Broadcast and IPv6 should not be used together. Do not try to set the
keyword for auto-generation of the broadcast address. If the user passes
a broadcast address for IPv6, throw an error.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-21 08:08:31 +00:00
Robin H. Johnson
e5eb062f05 net/iproute2: iproute2 flag handling
Several of the optional flags were not being handled correctly, they
were being passed as values only, without the keyword before them.
Affected keywords: anycast, label, scope, valid_lft, preferred_lft

Also change the handling of keywords to a common setup now, making
broadcast and peer strings the same as the above keywords.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-21 08:02:53 +00:00
William Hubbs
f6dc3d5ae9 cgroups: always mount the tmpfs on /sys/fs/cgroup
X-Gentoo-Bug:395079
X-Gentoo-Bug-URL:https://bugs.gentoo.org/show_bug.cgi?id=395079
2011-12-20 01:42:36 -06:00
Piotr Karbowski
3e2001f6a2 add rc_cgroup option to allow disabling of cgroup default setup
Currently, cgroups are still in development, so we are not setting them
up by default. However, this default will be changed in the future.

This commit message and patch were updated by
William Hubbs <williamh@gentoo.org>.

X-Gentoo-Bug: 395079
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395079
2011-12-20 01:14:08 -06:00
William Hubbs
ed4605bf9f cgroups: remove references to the "openrc" cgroup
Openrc will set up cgroups the way the kernel documentation recommends.
2011-12-19 21:54:53 -06:00
William Hubbs
461c69acdb cgroups: mount cgroups suggested by the kernel documentation
The linux kernel documentation suggests mounting a separate cgroup
hierarchy for each subsystem you want to control/monitor. This changes
the cgroups mounting code to do this.
2011-12-18 13:33:27 -06:00
Robin H. Johnson
879e1acd5d net: Support more variants of address family specification.
This includes address family specifications methods to help debug bug
358235 further.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-13 00:43:18 -08:00
Robin H. Johnson
06f6ce408c net/iproute2: Support routing policy for IPv6 per bug #385833
For creation of routing policy entries for IPv6, the family must be
explicitly specified to 'ip'.

X-Gentoo-Bug: 385833
X-Gentoo-Bug-URL: https://bugs.gentoo.org/385833
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-13 00:19:58 -08:00
Robin H. Johnson
ac2391e0cb net/vlan: Fix mtu setting
Fix minor shell typo that broke setting mtu on vlans.

X-Gentoo-Bug: 392971
X-Gentoo-Bug-URL: https://bugs.gentoo.org/392971
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-12 22:52:09 -08:00
William Hubbs
ce9994f7ca net/tuntap: fix return code when tools can't be found
This module should return failure if iproute2, openvpn or tunctl cannot
be found. Before it was returning success; this fixes the issue.
2011-12-13 00:25:58 -06:00
Salah Coronya
a38a5071f3 Tuntap: add iproute2 support
This patch was modified by William Hubbs <williamh@gentoo.org> to
document the new usage in net.example.

X-Gentoo-Bug: 394281
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=394281
2011-12-12 21:40:39 -06:00
Robin H. Johnson
2569eb644e net/ifconfig, net/iproute2: admin/oper state check functions
Provide consistent methods using iproute2/ifconfig to check operational
and administrative up/down state of interfaces. This is not the same as
ethtool's "Link detected" field, which is the state of the layer 2
medium.

TODO: How to check operational state in BSD?

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-12 19:20:39 -08:00
Robin H. Johnson
dd45506a40 net/bonding: ensure slave interfaces are down before adding.
The old ifenslave binary forcibly set new slave interface to down before
adding into the kernel, as a way of show it's version to the kernel. We
need to duplicate this so that the kernel doesn't think it's an old
ifenslave version using the bonding setup interface.

X-Gentoo-Bug: 391881
X-Gentoo-Bug-URL: https://bugs.gentoo.org/391881
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Thanks-to: Yun Zheng Hu <hu@fox-it.com>
2011-12-12 19:20:39 -08:00
William Hubbs
46b96eb80d Network: start interfaces after dbus
This is needed to allow auto-connect at boot.

Reported-by: David J Cozatt <ygdrasil@comcast.net>
X-Gentoo-Bug: 390955
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=390955
2011-12-12 19:46:03 -06:00
William Hubbs
e574b5d441 fix compile error
A variable used in the previous commit was actually removed in another
commit; that is why I didn't catch it.

Reported-by: Duncan < 1i5t5.duncan@cox.net>
X-Gentoo-Bug: 394369
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=394369
2011-12-11 14:33:39 -06:00
William Hubbs
5e01051c4e Allow init scripts to be executed with a relative path
This was a regression that was caused by the fix for
http://bugs.gentoo.org/show_bug.cgi?id=350910. I am reverting the commit
that we said fixed that bug and re-opening it.

Reported-By: Nathaniel <nathaniel@paust.us
X-Gentoo-Bug: 392457
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=392457
2011-12-11 01:18:08 -06:00
William Hubbs
8ea1190486 ip6to4: set correct subnet mask
The correct setting for this is /48.

Reported-by: MaratIK <marat.buharov@gmail.com>
X-Gentoo-Bug: 392723
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=392723
2011-12-09 21:57:00 -06:00
William Hubbs
a1c655949f iproute2: set a default broadcast address if none is specified
Reported-by: Spooky Ghost <spookyghost@blueyounder.co.uk>
X-Gentoo-Bug: 392593
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=392593
2011-12-09 20:49:26 -06:00
William Hubbs
325a7bf206 release openrc-0.9.7 2011-12-09 17:43:54 -06:00
William Hubbs
5adb3930c7 Integrate migrate-run into bootmisc
The migrate-run service was hanging when parallel startup was enabled
because of its dependencies. This integrates the logic for this service
into bootmisc, which will avoid the issues with parallel startup.

I would like to thank Robin H. Johnson <robbat2@gentoo.org> for his
input on this patch
2011-12-03 12:46:52 -06:00
William Hubbs
b628481701 migrate-run: fix ln calls and migrate directories separately
This is based on a patch submitted by AlphatPC@gmail.com.

Reported-by: AlphatPC@gmail.com
X-Gentoo-Bug: 391945
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=391945
2011-11-27 23:29:22 -06:00
William Hubbs
ab01a74405 Make migrate-run more verbose 2011-11-26 20:57:14 -06:00
William Hubbs
695f3886fb Remove rc_parallel from rc.conf
rc_parallel has never been considered a stable feature of openrc. To
that end, I am removing the documentation for this feature from
rc.conf.

It is still available, but bugs against it are not considered stable
blockers, and it should only be used currently by developers and users
who are willing to test the feature.

X-Gentoo-Bug: 391945
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=391945
2011-11-26 17:33:10 -06:00
Mike Frysinger
d8e739e19a urandom: move seed from /var/run to /var/lib
We want the seed to be preserved across reboots, so move it to /var/lib.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-26 13:21:54 -05:00
Mike Frysinger
3baca9a35c fsck: fix typo in fsck mount point support
Previous commit e3b39a677b missed adding a "[" to one of the tests.

Reported-by: Torsten Veller <tove@gentoo.org>
x-Gentoo-Bug: 391941
x-Gentoo-Bug-URL: http://bugs.gentoo.org/391941
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-26 03:21:21 -05:00
William Hubbs
467f91d870 release openrc-0.9.6 2011-11-25 15:39:59 -06:00
Mike Frysinger
cc45abb77b net.lo: fix typo in previous math commit
x-Gentoo-Bug: 391671
x-Gentoo-Bug-URL: http://bugs.gentoo.org/391671
Reported-by: Duncan <1i5t5.duncan@cox.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-23 13:17:20 -05:00
William Hubbs
40576a32d3 release openrc-0.9.5 2011-11-23 08:31:55 -06:00
William Hubbs
483db945e1 Fix typo 2011-11-23 08:17:33 -06:00
William Hubbs
17a1529416 Migrate /var/lock and /var/run to /run for linux systems 2011-11-23 07:26:05 -06:00
William Hubbs
815952a65a Revert "Revert "fsck: add the ability to specify mount points to check""
This reverts commit 5a3599df8a.

After review, I am bringing this back to the tree.
2011-11-22 12:56:29 -06:00
William Hubbs
76fec58633 pass the per-interface metric to resolvconf
Reported-by: Alon Bar-Lev <alon.barlev@gmail.com>
x-Gentoo-Bug: 364907
x-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?364907
2011-11-22 08:50:26 -06:00
William Hubbs
d8bbeb184f CGroups: create the openrc cgroup hierarchy
Openrc will create a cgroup hierarchy called openrc which will have all
services it starts and all subsystems attached to it. If you need other
groups/hierarchies, please use libcgroup.
2011-11-20 14:07:46 -06:00
Mike Frysinger
453d13296d rc: usage: do not output non-printable short options in usage
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-19 02:43:25 -05:00
Mike Frysinger
c21c1f1e59 rc: usage: optimize help string alignment output a little
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-19 02:42:41 -05:00
Mike Frysinger
c7cc685458 rc: fix style around case_RC_COMMON_GETOPT
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-19 02:33:11 -05:00
Mike Frysinger
ef1ff1b4f2 make shell math operations style more succulent
Convert the style:
	var=$((${var} + 1))
to:
	: $(( var += 1 ))

The latter is easier to read imo.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-19 02:25:36 -05:00