Commit Graph

2378 Commits

Author SHA1 Message Date
William Hubbs
85827d474c remove "after bootmisc" dependency from loopback interface 2011-04-10 17:24:44 -05:00
William Hubbs
8e925368b7 bring up the loopback interface earlier
For most situations, the loopback interface can depend on root instead
of localmount, so this patch makes that happen. It also adds comments to
the net.example files explaining when a user might want to change this
and giving an example.

I would like to thank Robin Johnson for the original patch and suggested
examples.

X-Gentoo-Bug: 292894
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=292894

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-04-10 16:10:47 -05:00
William Hubbs
15660dbbfc add fallback_routes support to network scripts
Add support for optional fallback_routes_* variables in the network scripts.
This is similar to the fallback_route_* support in baselayout-1.
However, if you do not have fallback_routes set for an interface but you
do have routes set, that setting will be used, so you do not need this
variable unless you want the fallback routes to be different from the
primary routes.

X-Gentoo-Bug: 250978
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=250978
2011-04-09 13:54:01 -05:00
William Hubbs
07db27d220 typo fix
X-Gentoo-Bug: 217999
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=217999
2011-04-09 13:00:44 -05:00
William Hubbs
16f7e90c6c clarify documentation for -timeout keyword 2011-04-08 14:08:29 -05:00
William Hubbs
c7c278dfd4 do not timeout waiting for bootmisc to complete
It is possible for bootmisc to take longer than 60 seconds to complete
and services should not time out waiting for it.

X-Gentoo-Bug: 360405
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360405
2011-04-08 14:01:13 -05:00
William Hubbs
73c862b792 fix typo in ethtool.sh
This was causing the ethtool interface to not work.

X-Gentoo-Bug: 360481
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360481
2011-04-07 07:48:56 -05:00
William Hubbs
46e67badd2 fix typo in staticroute
X-Gentoo-Bug: 362205
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=362205
2011-04-07 07:19:53 -05:00
William Hubbs
67640d2d97 remove hard coded directory paths from link flags
Currently, we do not see a reason for these, and it causes an issue for
cross compilation.

X-Gentoo-Bug: 361465
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=361465
2011-04-01 17:32:12 -05:00
Robin H. Johnson
8a45d5e24e Bug #360963: Improve interface naming/set_name_type documentation on new vlan code.
This is primarily for users with set_name_type settings from previous
sysadmins can easily see what changes to make.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-03-29 07:54:50 +00:00
Marc Joliet
6e1239795f remove bashism from ethtool module
X-Gentoo-Bug: 360367
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=360367
2011-03-27 15:45:45 -05:00
Mike Frysinger
7c1a2defb6 bootmisc: clean up tmpdir cleaning
Make sure that the `cd` into the $dir actually happened.  This we don't
have to worry about relative paths deleting stuff it shouldn't.  This
step shouldn't fail, but who knows, and better to be sane than to wipe
out someone's valuables.

When wiping, automatically fall back to a dedicated `find` if the initial
`rm` failed on us.  This should help with the speed issues related to the
later `find`.

Have the later find only search the top level allowing `rm` to walk the
directory contents.  This means that -xdev no longer applies, but since
the earlier `rm` wasn't doing -xdev either and no one has complained thus
far, let's assume it isn't an issue.  Also convert to the -exec...+ form
so that we don't have to worry about long argument lists, and add -- to
the `rm` that was previously missing.  In practice, this shouldn't matter
as we've already deleted all those files, but better safe than sorry.

When cleaning, since we've already done a `cd` into the $dir, no point in
prefixing all the paths with $dir too.  Go with the relative loving.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
X-Gentoo-Bug: 359831
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=359831
2011-03-25 11:25:25 -05:00
William Hubbs
1d63e85794 rework test for mounted /proc
The previous test assumed that we could always rely on the minor fault
counter to change between reads of /proc/self/stat, but we found that
this is not the case.

The new test compares two reads of /proc/self/environ for which we have
set the same environment variable to two different values.
If the comparison shows the two reads have the same contents, we know
that /proc is not working.

I would like to thank Robin Johnson and Mike Frysinger for their input
for this patch.

X-Gentoo-Bug: 348416
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=348416
2011-03-24 19:14:16 -05:00
William Hubbs
25049d3e80 termencoding needs root to be mounted read/write
X-Gentoo-Bug: 360215
X-Gentoo-Bug-URL: http://bugs.gentoo.org/360215
2011-03-23 22:41:03 -05:00
William Hubbs
b875abd1a5 release openrc-0.8.0 2011-03-22 00:46:24 -05:00
William Hubbs
c020454c84 update documentation for windowkeys variable
The documentation makes a recommendation for the setting but does not
state the purpose of the variable.

X-Gentoo-Bug: 357869
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357869
2011-03-22 00:34:50 -05:00
Ed Wildgoose
60d8d4f5bb do not delete addresses when stopping a ppp interface.
This is important in situations where ppp is being used in a demand
dialing setup.

X-Gentoo-Bug: 359069
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=359069
2011-03-21 23:55:55 -05:00
William Hubbs
c9912942f0 update documentation for rc_sys
Originally the plan was to deprecate this code, but this will not be
happening. There are some subsystems which can still be autodetected, so
we are keeping this code and allowing users to override the automatic
detection with this variable as well as set it to other subtypes we
cannot autodetect.

X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
2011-03-21 23:04:08 -05:00
Mike Frysinger
9f5eb03e5e net: bonding: avoid using bash string replace
X-Gentoo-Bug: 359311
X-Gentoo-Bug-URL: http://bugs.gentoo.org/359311
Reported-by: Raffaello D. Di Napoli <fastijum@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-18 14:24:18 -04:00
Mike Frysinger
d7e48fe643 rc_sys: let default behavior be automagic
The default rc_sys behavior was changed to always require manual
intervention by users.  This pretty much breaks all of the diff
system variants out there if people don't explicitly edit their
rc.conf file ahead of time.  We should have things work "out of
the box" as much as possible and reasonable.

X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/357247
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-03-14 20:35:08 -05:00
William Hubbs
87302487d2 savecache should not fail if we are shutting down
Since mount-ro needs to run unconditionally, we need to have savecache
report that it ran successfully when the system is shutting down.

X-Gentoo-Bug: 356393
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=356393
2011-03-06 11:50:06 -06:00
William Hubbs
0f3d6a01c7 remove references to the migration guide
The openrc code base is not gentoo specific, so I feel that we should
not refer to the migration guide in the comments inside the configuration
files.
2011-03-05 00:11:24 -06:00
William Hubbs
3fca6bd027 allow default rc_sys value to be set at build time
This allows the default value of rc_sys to be set when openrc is
compiled. This will allow openrc to be installed, e.g. on vserver guests
and will allow them to be rebooted without the need to edit rc.conf.

This patch is a combined effort between myself and Robin Johnson.

X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
2011-03-05 00:04:06 -06:00
William Hubbs
202fa20cbc fix typo 2011-03-03 15:06:39 -06:00
Robin H. Johnson
dfd42d1393 net/ethtool: official interface for changing ethtool params (bug #195479)
Implement a consistent interface for changing ethtool parameters, as
suggested in bug 195479. All variable names are based on the long option
to ethtool to set each group of parameters. Multiple entries seperated
by newlines are permitted for variable values.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 195479
2011-02-22 02:59:38 +00:00
Robin H. Johnson
22918ccf51 Update README.net to note that it represents newnet only. 2011-02-22 01:27:31 +00:00
Robin H. Johnson
20480048ca net/iproute2: Pass required explicit -6 for IPv6 tunnels (#347657)
Tunnel modes ipip6 and ip6ip6 require an explicit family selection for
the ip tunnel call.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 347657
2011-02-21 09:55:47 +00:00
Robin H. Johnson
683a21b0a0 net/vlan: update to use modern iproute2 interface
This replaces the vlan setup code that previously used the old vconfig
binary with a new implementation using the iproute2 interface.

vconfig does not handle many of the newer setups. No automatic migration
path is provided, as altering the configuration is non-trivial.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Written-by: Guillaume Castagnino <casta@xwing.info>
X-Gentoo-Bug: 346365
2011-02-21 09:41:48 +00:00
William Hubbs
b512d0db98 new implementation of applet option
This reworks the implementation of the --applet option so that it is
processed in run_applets() and does not require two calls to the
getopts_long() function. It is based on code by Robin Johnson and Chris
Richards.

X-Gentoo-Bug: 351712
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=351712
2011-02-16 09:00:38 -06:00
William Hubbs
73d1a8698e make version option common
This reworks the code for the version option so that it is part of the
parser loop and is a common option to all applets.
2011-02-14 18:40:05 -06:00
Sebastian Thorarensen
bae0a693a9 Set unicode mode immediately at boot without consolefont
X-Gentoo-Bug: 354793
X-Gentoo-Bug-URL: http://bugs.gentoo.org/354793
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2011-02-14 18:54:35 -05:00
Mike Frysinger
35d38c3561 local: quote script names to handle spaces
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-14 12:06:58 -05:00
Mike Frysinger
c0aa27ef32 tests: filter valid parisc relocs
Parisc generates a few relocs against internal symbols which are OK.

X-Gentoo-Bug: 258913
X-Gentoo-Bug-URL: http://bugs.gentoo.org/258913
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-14 12:06:58 -05:00
Mike Frysinger
11fcb0217e hwclock: fix typo from an earlier style commit
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-02-14 12:06:58 -05:00
Anthony G. Basile
c8b5078660 Fix bug #354805 2011-02-14 04:41:08 -05:00
Christian Wetzig
7bc920ab56 fix typo in iproute2 module
X-Gentoo-Bug: 354511
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=354511
2011-02-12 13:34:46 -06:00
William Hubbs
ebd79394a3 set timezone if RC_HCTOSYS is not set
We need to set the timezone for the system clock even when we allow the
kernel to set the time.

X-Gentoo-Bug: 248131
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=248131
2011-02-09 23:15:24 -06:00
William Hubbs
04379b2de9 fix symlink target
The target for the symlinks in ${SBINDIR} (the same directory as the rc
binary) was "rc". This is not correct; the target should be
${SBINDIR}/rc instead.
2011-02-07 02:25:00 -06:00
Christian
43678fd2c4 bridge.sh: use correct POSIX test, = not ==
X-Gentoo-Bug: 353124
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=353124
2011-02-05 07:24:11 -06:00
William Hubbs
db6d680765 rework pam, ncurses and termcap include files
This allows error checking inside the included files instead of either
including the appropriate file or a blank file.

Also the blank file named .mk gets removed by this change.
2011-02-04 22:30:30 -06:00
William Hubbs
a2e9cde737 remove BSD make code to handle including .depend 2011-02-04 22:28:57 -06:00
William Hubbs
aaaea44d22 use make conditional for -cstd flag
cc.mk was using ashell call to determine the value of the cstd variable.
This reworks that code so it uses a make conditional.
2011-02-04 22:26:23 -06:00
William Hubbs
19037cbd83 remove unnecessary shell calls
The main makefile, init.d/Makefile and src/librc/Makefile all contain
several shell calls which can be handled as make conditionals. This
switches them to conditionals.
2011-02-04 17:46:57 -06:00
Chris Richards
21c5a022af selinux: replace symlinks with wrapper scripts
This needs to be done on selinux systems so the proper context can be
set for each rc applet.

X-Gentoo-Bug: 351712
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=351712
2011-01-31 14:54:02 -06:00
William Hubbs
cca7e9f7e1 use immediate evaluation for shell calls
This reworks the shell calls in the makefiles to use immediate
evaluation and should improve parallel building.

X-Gentoo-Bug: 289264
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=289264
2011-01-31 14:05:57 -06:00
William Hubbs
c2529c1ed6 only support building with GNU Make
Update the documentation to state that openrc only works with gnu make.
This needs to be done in order to address the parallel build issue.

X-Gentoo-Bug: 289264
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=289264
2011-01-31 14:03:45 -06:00
William Hubbs
fa1fefb2bc add option to disable setting the system clock on boot for linux systems
This commit adds the clock_hctosys option which is used to skip setting
the system clock on boot and can be used with a modern linux kernel
which has the CONFIG_RTC_HCTOSYS option set to y.
I would like to thank Dimitris Mandalidis for the report and for the
patch to baselayout-1 on which my changes to openrc are based.

X-Gentoo-Bug: 248131
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=248131
2011-01-24 21:37:51 -06:00
William Hubbs
10ce67886d change local to run programs
This changes the local service so that it will run programs located in
@sysconfdir@/local.d instead of the local_start and local_stop functions
from @sysconfdir@/conf.d/local.

The advantage for the user is that these programs are not part
of the openrc package, so the user does not have to worry about them
being overwritten when openrc is upgraded.

X-Gentoo-Bug: 351465
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=351465
2011-01-20 12:50:29 -06:00
Robin H. Johnson
eebb2d1b9c test: You need to run "make" before "make check" will work.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-01-18 01:49:22 +00:00
Robin H. Johnson
e39178de28 docs: make check does not catch textfile trailing whitespace. 2011-01-18 01:48:53 +00:00