Commit Graph

28 Commits

Author SHA1 Message Date
William Hubbs
b29b2fb3cb mtab: make /etc/mtab as a file configurable 2015-10-14 12:19:13 -05:00
William Hubbs
8352082eb6 devfs: add code to mount /dev
All Linux systems need /dev to be set up,so add code to devfs to do
this. The process devfs follows is below.

1. If static_dev is yes, nothing is done.
2. if /dev is an entry in fstab it is mounted or remounted based on that
entry.
3. If /dev is not in fstab, it attempts to mount /dev as a devtmpfs or
   tmpfs depending on which is defined in the kernel; devtmpfs is
   preferred.
4. If neither devtmpfs nor tmpfs is defined, it assumes the user wants
static /dev and prints a warning.

X-Gentoo-Bug: 492694
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=492694
2014-01-05 11:17:05 -06:00
William Hubbs
838c9efb36 Remove gentoo's net.* scripts
It has been determined that it will be best for gentoo's net.* scripts
to be in a separate package to allow independent development.
This package will be called netifrc and maintained by Gentoo.
2013-08-13 16:33:41 -05:00
William Hubbs
1a8cd5ff9d Tmpfiles: create and delete entries once in the boot runlevel.
Initially, we were creating tmpfiles entries in the sysinit runlevel and
again in the boot runlevel. Systemd runs the --create and --remove
options in one service called systemd-tmpfiles-setup after the local
file systems are mounted. Now we have a service called tmpfiles.setup
which emulates this.

This also closes the bug mentioned below, since we were originally
writing to files that were on read-only file systems and that were not
available.

Reported-by: <devurandom@gmx.net>
X-Gentoo-Bug: 439012
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439012
2012-10-31 17:33:14 -05:00
William Hubbs
5148047f89 netmount: drop need net from dependencies
Reported-by: <mattsch@gmail.com>
X-Gentoo-Bug: 439658
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439658
2012-10-25 16:33:56 -05:00
Robin H. Johnson
4ff71bd741 tmpfiles.d init.d scripts
Now that the tmpfiles.d code is more tested, actually call it from
init.d. It assumes that /run is already available when it runs.

Please note it runs TWICE.
- During sysinit, ideally just after /dev/shm is created, but before
  udev has started. After udev is also acceptable, but not ideal.
- During boot, ideally just after localmount has completed.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-09-26 15:42:37 -07:00
William Hubbs
006fbdce83 fix the upstream default network stack
The OpenRC upstream default network stack was changed, but there was no
reason to change it. Now since we have the MKNET build switch, it is
easy for the gentoo ebuild to install oldnet by default.

The upstream default is newnet.
2012-07-10 12:18:06 -05:00
William Hubbs
60d6847de5 add the MKNET variable to select a network stack
The MKNET variable can be used to select the network stack you want to
build and install with OpenRC.

The current default is the gentoo "oldnet" stack. If you want to install
the OpenRC newnet stack, use MKNET=newnet on the make command line.
2012-07-10 02:39:36 -05:00
Mike Frysinger
9a539ebbe1 further clean up OS differences in makefiles
No need for if() logic.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-20 14:32:37 -05:00
William Hubbs
9c77502f96 Make variable references in Makefiles consistent
Some variable references were written as $(foo), but the majority were
written as ${foo}. This commit changes all of the variable references
to using braces.
2011-10-19 12:22:23 -05:00
William Hubbs
ecf77254bb consolodate Makefiles
The tree contained many operating system specific Makefiles which were
being included in other Makefiles. This commit removes those and adds
the code to the makefiles which included them using make's conditional
processing.

X-Gentoo-Bug: 387441
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=387441
2011-10-18 03:23:00 -05:00
William Hubbs
10ce67886d change local to run programs
This changes the local service so that it will run programs located in
@sysconfdir@/local.d instead of the local_start and local_stop functions
from @sysconfdir@/conf.d/local.

The advantage for the user is that these programs are not part
of the openrc package, so the user does not have to worry about them
being overwritten when openrc is upgraded.

X-Gentoo-Bug: 351465
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=351465
2011-01-20 12:50:29 -06:00
Roy Marples
bb45f0eabc Fix BSD compile. 2010-01-08 00:22:04 +00:00
William Hubbs
2c0a71172d default route commands on Linux now require gw or via (iproute2). 2009-12-19 08:03:35 +00:00
Roy Marples
baeb59cd2e Add a new staticroute init script so that .... static routes can be configured!
Fixes Gentoo #288421.
2009-10-16 08:08:22 +01:00
Roy Marples
43063ae7c2 Fix compile on NetBSD and FreeBSD 2009-05-05 10:24:21 +01:00
Roy Marples
170547010f Pull /etc/ifconfig.eth0 into interfaces
Reverse list of interfaces when stopping
Improve build for conf.d/network
2009-04-19 08:52:00 +00:00
Roy Marples
6027b0ed7d Add a new init script - network
This simply assigns static addresses and an optional default route.
It's possible to add external commands as well, so to create a bonded interface.

Hopefully we can add a few examples to satisfy most of the old net.lo, which
is no longer installed into boot by default.
2009-04-16 23:47:23 +00:00
Roy Marples
b83108cd2e Add a knob to avoid the unmounting of some points. 2008-07-09 16:08:38 +00:00
Roy Marples
748ddf28ed Include Os Makefile. 2008-03-25 14:15:54 +00:00
Roy Marples
55eb3794fb Rework our folder structure so that we don't have OS specific dirs, making it easier to share init and conf files per OS. 2008-03-25 14:06:05 +00:00
Roy Marples
a689b66023 Add tunable SYSCONFDIR 2008-03-05 12:27:11 +00:00
Roy Marples
61c476e72d Use exlicit make targets, not directory contents. 2008-03-03 12:34:51 +00:00
Roy Marples
4314784520 Allow for OS and SUBOS folders so we can introduce NetBSD scripts whilst keeping BSD for all BSD's. 2008-01-10 16:35:59 +00:00
Roy Marples
9635b455c7 Introduce CONTENTS variable into Makefiles to list the contents of the directory, excluding the Makefile for to Make life easier 2007-11-20 17:37:15 +00:00
Roy Marples
5f8cf73b22 Our build chain now works with GNU and BSD make implementations 2007-11-19 13:48:43 +00:00
Mike Frysinger
5876968f2e calc the files to install dynamically 2007-06-22 02:59:29 +00:00
Roy Marples
5af58b4514 Rewrite the core parts in C. We now provide librc so other programs can
query runlevels, services and state without using bash. We also provide
libeinfo so other programs can easily use our informational functions.

As such, we have dropped the requirement of using bash as the init script
shell. We now use /bin/sh and have strived to make the scripts as portable
as possible. Shells that work are bash and dash. busybox works provided
you disable s-s-d. If you have WIPE_TMP set to yes in conf.d/bootmisc you
should disable find too.
zsh and ksh do not work at this time.

Networking support is currently being re-vamped also as it was heavily bash
array based. As such, a new config format is available like so
config_eth0="1.2.3.4/24 5.6.7.8/16"
or like so
config_eth0="'1.2.3.4 netmask 255.255.255.0' '5.6.7.8 netmask 255.255.0.0'"

We will still support the old bash array format provided that /bin/sh IS
a link it bash.

ChangeLog for baselayout-1 can be found in our SVN repo.
2007-04-05 11:18:42 +00:00