Commit Graph

699 Commits

Author SHA1 Message Date
William Hubbs
deaae7ab5c init.d/sysfs: load efivarfs module when booting in efi mode:1
The presence of /sys/firmware/efi is used to indicate that the system
was booted in efi mode.
2016-10-05 22:48:17 -05:00
William Hubbs
3d2c2f0b87 init.d/sysfs: fix efivarfs module test 2016-10-04 18:18:17 -05:00
William Hubbs
6a0c033a64 init.d/sysfs: fix efivarfs handling
Separate loading the module, if it isn't built in or loaded, from
mounting the file system.

This also makes sure the warning about configuring the module in
/etc/conf.d/modules or building it in is displayed only if it is loaded
successfully.

X-Gentoo-Bug: 595836
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=595836
2016-10-04 12:06:58 -05:00
Doug Freed
61882821e0 init.d: Clean up some bad ewarn output 2016-09-28 15:00:40 -04:00
William Hubbs
0a76627345 init.d/swap: remove the case for linux
I am removing the separate case for Linux, because we are droppping the
"-e" switch.
2016-09-23 14:17:14 -05:00
William Hubbs
bf73363f22 Add --use-blacklist to modprobe calls in modules and modules-load
This means that we will honor the modprobe black lists.

X-Gentoo-Bug: 594012
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=594012
2016-09-20 13:15:39 -05:00
William Hubbs
b02ff466fa savecache: stop saving the dependency tree
This fixes #85.
2016-09-12 12:58:31 -05:00
William Hubbs
6bd0f2d096 init.d/procfs: typo fix 2016-09-12 12:58:01 -05:00
William Hubbs
841b883825 hwclock: fix module load warning 2016-09-08 13:36:13 -05:00
William Hubbs
ba10793b0b init.d/procfs: fix binfmt_misc module load warning
This reworks the logic so that the warning about configuring the
binfmt_misc module is only displayed if the module actually has to be
loaded.
2016-09-08 11:53:20 -05:00
William Hubbs
d5db5489be init.d/swap: do not unmount all tmpfs file systems
X-Gentoo-Bug: 568162
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=568162
2016-09-05 13:39:51 -05:00
William Hubbs
d06db93d59 remove swapfiles service
The swapfiles service was basically a copy of the swap service, so this
commit consolidates the functionality into the swap service.

X-Funtoo-Bug-URL: https://bugs.funtoo.org/browse/FL-2523
X-Gentoo-Bug: 568162
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=568162
2016-09-05 13:39:51 -05:00
Martin Väth
8c14d0c476 Fix typo in RC_UNAME check of modules-load
The $RC_UNAME "Linux" had been misspelled as "linux".
As a consequence, entries in e.g. /etc/modules-load.d failed to
load any module succesfully under Linux(!)
2016-08-30 19:47:13 +02:00
Doug Freed
c289774b00 modules-load: handle comments better
This handles comments without a trailing space after the comment
character.

Reported-By: josef64
2016-08-26 15:23:54 -04:00
William Hubbs
686e172207 init.d: add modules-load to ignore patterns 2016-08-25 17:04:06 -05:00
William Hubbs
fef6268f8d modules-load.d: cleanups
Move list of directories to a local variable and create the fn variable
to use for an individual file name rather than using path.
2016-08-25 16:12:33 -05:00
William Hubbs
556dbff99d Add modules-load.d support 2016-08-25 12:08:44 -05:00
William Hubbs
4018dfc8de init.d/hostname: do not use localhost as a default hostname
This allows the operating system default hostname to be used if no
hostname is configured.
2016-08-24 13:43:11 -05:00
William Hubbs
353bb9bc9a init.d/hostname: add support for /etc/hostname 2016-08-23 13:22:19 -05:00
William Hubbs
73cdf10f1f Deprecate automatic loading of modules
In the hwclock, procfs and sysfs service scripts, we automatically
attempt to load the kernel modules we need before we take any action. We
shouldn't do this, because there are systems which do not use kernel
modules and do not have the kmod package installed.

With this change, we continue to load the modules ourselves, but we warn
the admin that they need to be added to /etc/conf.d/modules or built
into the kernel.

In the future, this automatic loading will be dropped.

X-Gentoo-Bug: 342313
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=342313
2016-08-19 11:08:27 -05:00
William Hubbs
cae3976ef1 init.d: Add runsvdir to ignore patterns 2016-07-31 14:02:30 -05:00
William Hubbs
da28a3d367 init.d: initial service adjustments for docker support
Add -docker keyword to the same scripts that have -lxc keyword.
2016-07-31 13:01:17 -05:00
William Hubbs
f62253b833 Add support for runit
X-Gentoo-Bug: 501364
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=501364
2016-07-27 16:26:26 -05:00
William Hubbs
f2c2e2dd5a init.d/sysctl.in: typo fix 2016-07-27 14:09:24 -05:00
William Hubbs
b19d0a40d7 init.d/loopback: remove unnecessary stop function 2016-07-26 11:14:50 -05:00
William Hubbs
daf9397764 init.d: combine sysctl scripts
We had separate sysctl scripts for each operating system. However, there
is no need to do this since we can detect the operating system at
runtime with $RC_UNAME.
2016-07-19 16:21:48 -05:00
William Hubbs
314ae3dc78 modules: add support for FreeBSD
This is based on a patch submitted by
Joe Maloney <pkgdemonteam@gmail.com>.

This fixes #91.
2016-07-18 17:09:41 -05:00
William Hubbs
ac8ad169ae hwclock: always use --noadjfile if available
When we use the --utc or --localtime switch, also use --noadjfile if it
is available. This means hwclock will not use a drift file.

X-Gentoo-Bug: 584722
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=584722
2016-07-06 10:40:31 -05:00
William Hubbs
92e2f2c7cc killprocs: remove calls to sleep
X-Gentoo-Bug: 487084
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487084
2016-05-05 17:02:39 -05:00
William Hubbs
fd80b6fc67 localmount/netmount: clean up critical mount processing
Fix a typo and do not fail if a path in critical_mounts is not listed as
a critical mount does not get mounted.
2016-04-26 12:43:50 -05:00
William Hubbs
5d130cc45c localmount/netmount: allow mount points to be marked critical
In previous releases, we either treated no mount points as critical or
all of them.

Now both localmount and netmount support a critical_mounts setting. If
mount points listed in this setting fail to mount, localmount and
netmount will fail.
2016-04-25 12:04:34 -05:00
William Hubbs
1c3c2cf6d8 netmount: fix mounting on Linux
Before this commit, on Linux, we were always trying to mount file
systems marked with _netdev, even when the previous mount command
failed. Now, we do not run the second mount if the first fails.

X-Gentoo-Bug: 579876
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=579876
2016-04-15 11:30:44 -05:00
Mike Frysinger
2c1f6a16e1 sysfs: mount pstore when available 2016-02-09 15:39:43 -06:00
William Hubbs
e52b5f59c2 savecache: stop saving nettree
Netifrc is no longer part of OpenRC, so we shouldn't save its dep tree
as part of savecache.

This should have been removed when netifrc was split out. also, it
might be related to the following bug.

X-Gentoo-Bug: 563720
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=563720
2016-01-28 17:06:25 -06:00
William Hubbs
e277ae57ef fix tests
X-Gentoo-Bug: 572602
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=572602
2016-01-22 12:07:13 -06:00
William Hubbs
cd7883d25d localmount: Allow users to control whether errors are ignored
X-Gentoo-Bug: 572138
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=572138
2016-01-19 13:34:04 -06:00
joe9
9473ac514c allow the user to decide whether fsck aborts for errors
X-Gentoo-Bug: 564008
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=564008
2016-01-13 10:52:22 -06:00
William Hubbs
5d3e85bc31 add ignore patterns for init.d directory 2016-01-01 09:19:49 -06:00
William Hubbs
000503fad7 Convert OpenRC to a centralized copyright/license structure
In the past, OpenRC was a hybrid of a centralized and file-scope
license/copyright structure.

I followed the instructions from the Software Freedom Law Center [1] to
convert to a Centralized structure where possible, for easier future
maintenance.

[1] https://softwarefreedom.org/resources/2012/ManagingCopyrightInformation.html
2015-12-21 12:16:06 -06:00
Rick Farina (Zero_Chaos)
c45313dfa9 netmount: use want dependency to start nfsclient
add in parsing of fstab to determine if nfsclient should be automatically
started so that netmount can mount nfs without adding nfsclient
to the default runlevel

This fixes #71.
2015-12-11 13:56:03 -06:00
William Hubbs
4cf6b0ecf7 consolefont: add after modules to dependencies
X-Gentoo-Bug: 559540
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=559540
2015-10-29 11:27:27 -05:00
William Hubbs
ee944553a9 bootmisc: optionally save the previous dmesg log
X-Gentoo-Bug: 561204
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=561204
2015-10-21 14:04:28 -05:00
William Hubbs
960881fcfe Add net-online service 2015-10-20 12:13:47 -05:00
William Hubbs
d26013494d mtab: typo fix 2015-10-14 17:48:32 -05:00
William Hubbs
b29b2fb3cb mtab: make /etc/mtab as a file configurable 2015-10-14 12:19:13 -05:00
William Hubbs
9d53d436ae sysfs: consolidate cgroup processing code in a single function 2015-10-13 15:07:53 -05:00
William Hubbs
d5116cc697 localmount: white space cleanup 2015-10-08 13:20:14 -05:00
Ian Stakenvicius
b86d170037 localmount: clean up handling of aufs branches
X-Gentoo-Bug: 560008
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=560008
2015-10-08 12:49:09 -05:00
William Hubbs
6fa0d6318b mtab: fix update logic
This advises users to remove mtab from their runlevels if /etc/mtab is a
symlink, and it creates the symlink if /etc/mtab does not exist on a
system.

X-Gentoo-Bug: 560060
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=560060
2015-10-07 11:35:31 -05:00
William Hubbs
17ef205bc6 sysfs: use printf instead of echo to write to cgroup files
This is needed for compatibility with musl and printf is also posix.

X-Gentoo-Bug: 562334
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=562334
2015-10-06 13:31:43 -05:00
William Hubbs
bf0c0dd564 bootmisc: convert errors in clean_run function to warnings
X-Gentoo-Bug: 552418
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=552418
2015-10-05 11:22:08 -05:00
William Hubbs
1558ad2b9e bootmisc: only remove temp directory if umount is successful
Change the clean_run function to only remove the temp directory if the
umount was successful.

X-Gentoo-Bug: 561230
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=561230
2015-10-05 11:08:11 -05:00
William Hubbs
dac5966ca4 Revert "local/netmount: remove uses of -O [no]_netdev"
This reverts commit 2a439c85bd.
There is another use case for -O involving iscsi, so we can't remove it.
2015-10-01 17:33:43 -05:00
William Hubbs
b047ea47e9 localmount/netmount: on Linux, fail if some file systems do not mount
The following return codes are returned by mount -a:

0:  all file systems mounted.
32: no file systems mounted.
64: some file systems mounted.

The localmount/netmount services should fail if all file systems that
should mount did not mount.
2015-09-01 14:41:07 -05:00
William Hubbs
b652752339 Make localmount and netmount always succeed on non-linux 2015-08-21 12:21:31 -05:00
William Hubbs
2a439c85bd local/netmount: remove uses of -O [no]_netdev
This was causing an incompatibility with busybox, and we do not use it
in Gentoo.
2015-08-18 18:25:48 -05:00
William Hubbs
7341cd882f allow localmount and netmount to fail 2015-08-17 18:21:39 -05:00
Mike Frysinger
279f1e5d10 binfmt: fix indent on return 2015-08-10 18:50:10 -05:00
Doug Freed
c256a7aa80 savecache: clean up implementation
X-Gentoo-Bug: 557222
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=557222
2015-08-10 14:51:15 +00:00
Doug Freed
1736be3bc3 savecache: Fix unable to create cache message
The cache is created in $RC_LIBEXECDIR, not $RC_SVCDIR, so fix the error
message when we fail to create it to match.
2015-07-10 13:24:10 -04:00
Mike Gilbert
b209fe3859 bootmisc: Don't call dmesg in systemd-nspawn containers
This fixes #57.
2015-06-02 13:11:04 -05:00
William Hubbs
bb2d7becfd Add support for the s6 supervision suite 2015-05-11 18:36:49 -05:00
Mike Gilbert
7bd456ed7b Disable service scripts for systemd-nspawn
This adds the -systemd-nspawn keyword to service scripts which are not
intended to run in systemd-nspawn containers.

This fixes #52.

    X-Gentoo-Bug: 548058
    X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=548058
2015-05-01 09:14:09 -05:00
William Hubbs
8b93492086 convert all references from runscript to openrc-run 2015-04-27 11:21:29 -05:00
William Hubbs
a6391f44ee mtab: move toward requiring /etc/mtab to be a symbolic link
This changes the mtab service in the following way:

- If /etc/mtab is a symbolic link, success is returned.
- If /etc is not writable, we warn that we could not update /etc/mtab
  and return success.
- If /etc/mtab does not exist, we create a symbolic link from
  /etc/mtab to /proc/self/mounts.
- Otherwise, we warn that updating /etc/mtab as a file is
  deprecated and continue to update it after outputting instructions to
  the user for how to move it to a symbolic link.
2015-04-25 16:37:09 -05:00
William Hubbs
23d806ca24 savecache: clean up creation of cache directory
The cache directory should be created via mkdir -p instead of
mkdir. This makes sure all parent directories are created.

Also, we now display an error message explaining that we were unable to
create the cache directory if creation fails.
2015-04-21 18:56:39 -05:00
William Hubbs
de7d184909 savecache: fix check for $RC_LIBEXECDIR writability
We were originally checking to see if $RC_LIBEXECDIR/cache was writable. For
a new install, this check will fail since this path does not exist. This
is also incorrect because later we create $RC_LIBEXECDIR/cache.

The correct check is checkpath -W $RC_LIBEXECDIR, and this fixes the
issue.

X-Gentoo-Bug: 544632
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=544632
2015-04-21 18:30:26 -05:00
William Hubbs
ee1768a419 Add binfmt service to sysinit runlevel
This makes binfmt processing behave like tmpfiles processing which
follows the same specification as systemd.

This fixes #48.

X-Gentoo-Bug: 545162
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=545162
2015-04-20 17:10:07 -05:00
William Hubbs
95ed066539 procfs: do not force loading of usbcore module
It appears that the only reason we were force loading the usbcore
module was to facilitate mounting usbfs. Since we no longer mount
usbfs, this is no longer necessary.

X-Gentoo-Bug: 480312
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=480312
2015-04-20 11:02:01 -05:00
William Hubbs
4c5132421f procfs: remove usbfs and usbdevfs support
The usbfs and usbdevfs file systems have been deprecated since
Linux-2.6.32, so we remove the code to automount them.

X-Gentoo-Bug: 480312
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=480312
2015-04-20 10:59:47 -05:00
William Hubbs
6d81d3be1b procfs: do not test for the existence of /proc/filesystems
The test for the existence of /proc/filesystems is redundant since we
always return success.
2015-04-19 13:59:12 -05:00
William Hubbs
8d307a6fad procfs: remove redundant check for OpenVZ
The check for OpenVZ is not necessary since the procfs service already
will not run on OpenVZ due to the keywords setting.
2015-04-17 14:15:59 -05:00
William Hubbs
62addf1180 Move SELinux mount to sysfs service
The selinux file system is mounted under /sys, so move the code for it
to the appropriate service.

X-Gentoo-Bug: 546290
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=546290
2015-04-14 11:41:17 -05:00
William Hubbs
731a3affdc Fix script execution in the local service
The local service should use eval when it executes scripts since it has
the redirection set up in a variable.

This fixes #50.
X-Gentoo-Bug: 545012
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=545012
2015-04-08 09:37:04 -05:00
William Hubbs
3e9bb3b021 Make sysctl on Linux respect rc_verbose setting
We do not need to spam the console with variable settings by default.
This fixes #51.

X-Gentoo-Bug: 541922
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=541922
2015-04-07 17:57:56 -05:00
Anthony Donnelly
be497229b6 Fix savecore service on FreeBSD
savecore -C only needs the dumpdevice otherwise it causes an error on startup.

This fixes #40.
2015-03-23 14:06:52 -05:00
Will Miles
ccd83a5e9c savecache: Make sure cache directory exists before running checkpath
checkpath -W can fail if the specified path doesn't actually exist yet.
In this case savecache script should attempt to create the path if it is
missing, however it is pre-empted by the checkpath call.  This patch adds
an explicit existence test before executing checkpath.

This fixes #36.
2015-03-20 17:21:57 -05:00
Robin H. Johnson
7bbb73574b bootmisc: clean_run safety improvements.
If /tmp or / are read-only, the clean_run function can fail in some very
bad ways.

1. dir=$(mktemp -d) returns an EMPTY string on error.
2. "mount -o bind / $dir", and don't check the result of that,
3. "rm -rf $dir/run/*", which removes the REAL /run contents
4. box gets very weird from this point forward

Signed-Off-By: Robin H. Johnson <robbat2@gentoo.org>
Signed-Off-By: Chip Parker <infowolfe@gmail.com>
Reported-by: Chip Parker <infowolfe@gmail.com>
Tested-by: Chip Parker <infowolfe@gmail.com>
2015-02-27 10:14:44 -06:00
William Hubbs
9dfb85d5d2 local: fix redirections
The local service now redirects stdout and stderr for the scripts it
runs to /dev/null unless it is run in verbose mode.

X-Gentoo-Bug: 537444
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=537444
2015-02-18 09:58:54 -06:00
William Hubbs
3100114bc1 Add nfsclient to netmount use dependencies
X-Gentoo-Bug: 537996
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=537996
2015-02-03 10:54:57 -06:00
Consus
8250ac94df tmpfiles.*: Follow OpenRC's message style
Just to be consistent.
2015-01-24 13:36:48 -06:00
William Hubbs
3c5dc0ec77 tmpfiles.dev: pass --boot to tmpfiles.sh so kmod works properly 2015-01-18 09:13:43 -06:00
William Hubbs
30cc3cdb76 Make sysfs behave like netmount and localmount
sysfs now mounts all related sysfs file systems and returns success,
like netmount and localmount.

Also, we now check to make sure the cgroups are not mounted before we
mount them.

X-Gentoo-Bug: 530138
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=530138
2014-11-23 21:39:20 -06:00
William Hubbs
3fad31a994 init.d: add osclock to ignore patterns 2014-11-20 11:25:48 -06:00
William Hubbs
8d0ca13fbd devfs: optionally add missing symbolic links
If symbolic links for /dev/{fd,stdin,stdout,stderr,core} do not exist
once /dev is mounted, we should create them.
2014-11-20 10:55:53 -06:00
William Hubbs
93ba67eff9 netmount: unmount nfs file systems 2014-11-06 14:38:17 -06:00
Ralph Sennhauser
0bfde472d0 Add osclock service
This scripts sole purpose is to "provide clock" on OSs that already
take care of the clock being properly set.
2014-10-27 18:13:22 -05:00
Svante Signell
203b754f84 add missing files for GNU/Hurd 2014-10-23 13:00:24 -05:00
Gabriele Giacone
d8e1d9a6ed Add missing files for GNU/kFreeBSD 2014-10-22 11:09:58 -05:00
William Hubbs
85da4a5e26 add back nfs and nfs4 file systems
Fix gentoo bug #427996 correctly.
We should attempt to mount the file systems, but not try to start the
daemons. The previous fix removed mounting the file systems as well as
starting the daemons.

X-Gentoo-Bug: 508574
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=508574
2014-10-16 16:41:02 -05:00
Rick Farina (ZeroChaos)
ad770d739c localmount: unmount aufs branches 2014-10-06 16:24:44 -05:00
William Hubbs
e860b7cb4f Revert "sysfs: fix permissions on cgroup mounts"
This reverts commit 7a25491ced.
This was broken; I need to look further into it.
2014-09-16 17:44:30 -05:00
William Hubbs
7a25491ced sysfs: fix permissions on cgroup mounts 2014-09-16 15:14:12 -05:00
Joe M
d032b17897 savecache: check permissions on the correct directory 2014-08-29 09:10:58 -05:00
William Hubbs
4f4f00d612 cgroups: fix cgroup subsystem mounting
Originally, we aborted all of the cgroup setup if /sys/fs/cgroup/openrc
was already mounted. This  caused an issue in lxc containers, so we
should always allow the subsystems to be mounted.

X-Gentoo-Bug: 520606
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=520606
2014-08-22 14:01:20 -05:00
William Hubbs
c60ef5c381 mtab: add verbose level deprecation warnings 2014-08-17 11:23:52 -05:00
William Hubbs
645f7b6947 adjust deprecation schedule for mtab
- Quiet the deprecation messages forr now
- update the feature removal schedule to reflect that it will be removed
  in 2.0.
2014-08-16 15:07:48 -05:00
William Hubbs
1b26d547a5 Deprecate the mtab service script
The mtab service script is no longer needed on modern Linux systems, so
we can remove it in 1.0. However, we need to set a deprecation notice
first.
2014-08-14 13:50:48 -05:00
William Hubbs
7b744befac bootmisc: do not run the clean_run function in an LXC container 2014-08-10 17:15:05 -05:00
William Hubbs
d29db70efb sysctl.linux.in: use the --system option
According to the sysctl man page, the --system option causes sysctl to
process all system configuration files, which include the following:

/run/sysctl.d/*.conf
/etc/sysctl.d/*.conf
/usr/local/lib/sysctl.d/*.conf
/usr/lib/sysctl.d/*.conf
/lib/sysctl.d/*.conf
/etc/sysctl.conf

X-Gentoo-Bug: 484796
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=484796
2014-08-09 12:35:04 -05:00
William Hubbs
6a337ff6c5 devfs: several small clarifications
- Rename the static_dev switch in conf.d/devfs to skip_mount_dev since
  this is a better description of what the switch does.

- Clarify the error messages in the devfs service script based on the
  new name of the switch.
2014-08-08 14:49:00 -05:00
William Hubbs
e3bfb68aec hwclock: always set the kernel's timezone
The hwclock service should set the time zone regardless of the setting
of the clock_hctosys variable. This needs to be done to prevent issues
when the system time is being synchronized using ntp.

X-Gentoo-Bug: 434410
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=434410
2014-07-24 17:40:14 -05:00
Jason Zaman
1a1d53335b devfs: fix restorecon ebegin message to match sys
X-Gentoo-Bug: 516956
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=516956
2014-07-16 18:22:33 -05:00
Jason Zaman
99939b9839 sysfs: restorecon after mounting /sys
X-Gentoo-Bug: 516956
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=516956
2014-07-16 18:21:59 -05:00
Jason Zaman
525d7140b1 devfs: fix SELinux contexts
SELinux contexts in /dev need to be fixed after it is mounted

X-Gentoo-Bug: 516956
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=516956
2014-07-16 11:58:11 -05:00
William Hubbs
25c229cf83 sysfs.in: fix indentation 2014-07-14 15:58:50 -05:00
William Hubbs
57b9e601a9 init.d/local: bring functioning more in line with how sysctl works
- remove the has_executables variable since it isn't used.
- Convert the conditional calls to ewend/vewend to a single call to veend.
- Always call eend after all scripts are executed passing the appropriate
error code.

Because of this change, you will see only an overall status when
starting or stopping local unless you are using verbose mode.
2014-07-09 15:33:48 -05:00
Thomas D
c1de8c09bf Add support for verbose "local" service runscript
With this patch, the "local" service runscript will be verbose like the
"sysctl" service when 'rc_verbose="yes"' is set.

Example output successful start:

 * Stopping local ...
 *   Executing "/etc/local.d/00will-stop.stop" ...                  [ ok ]
 * Starting local ...
 *   Executing "/etc/local.d/00will-start.start" ...                [ ok ]
 *   Executing "/etc/local.d/01 test.start" ...                     [ ok ]

Example output with failing executables:

 * Stopping local ...
 *   Executing "/etc/local.d/00will-stop.stop" ...                  [ ok ]
 *   Executing "/etc/local.d/will-fail.stop" ...
mount: can't find foo in /etc/fstab
 *   Execution of "/etc/local.d/will-fail.stop" failed.             [ !! ]
 * Starting local ...
 *   Executing "/etc/local.d/00will-start.start" ...                [ ok ]
 *   Executing "/etc/local.d/01 test.start" ...                     [ ok ]
 *   Executing "/etc/local.d/will-fail2.start" ...
mount: can't find bar in /etc/fstab
 *   Execution of "/etc/local.d/will-fail2.start" failed.           [ !! ]
 *   Executing "/etc/local.d/will-fail.start" ...
mount: can't find foo in /etc/fstab
 *   Execution of "/etc/local.d/will-fail.start" failed.            [ !! ]

X-Gentoo-Bug: 489274
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=489274
2014-07-05 13:12:30 -05:00
Kaarle Ritvanen
143f1c64c1 sysctl.Linux.in: remove -lxc from keywords
certain tunables can be set independently for each container

X-Gentoo-Bug: 516050
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=516050
2014-07-04 08:33:55 -05:00
William Hubbs
56112a6f1f sysfs: Do not mount openrc cgroup if it is already mounted
We were not checking to see if /sys/fs/cgroup/openrc was already mounted
before we mounted it. This fixes that issue.
Thanks to Robin Johnson <robbat2@gentoo.org> for pointing this out.
2014-06-30 20:30:39 -05:00
Sven Vermeulen
6126700a07 SELinux filesystem is at /sys/fs/selinux
The SELinux filesystem has been moved to /sys/fs/selinux for quite some
time. We kept supporting /selinux for backwards compatibility, but it's
time to move forward on this.

X-Gentoo-Bug: 511718
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=511718
Signed-off-by: Sven Vermeulen <sven.vermeulen@siphos.be>
2014-06-20 18:37:33 -05:00
Andrew Gregory
20d7b83150 tmpfiles.dev: remove --remove option
For compatibility with systemd.

Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2014-04-03 12:39:27 -05:00
Andrew Gregory
686ee62a79 tmpfiles: add support for --boot option
For compatibility with systemd-tmpfiles.

Fixes #17

Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2014-03-27 11:36:41 -04:00
Mike Frysinger
4ee8e90ffe devfs: explicitly mount /dev/shm with mode=1777
The current code relies on the tmpfs mount defaulting to 1777
permissions.  If it doesn't, things break badly.

This can come up when tmpfs is disabled in the kernel and ramfs
is being used instead (the kernel will alias tmpfs to ramfs).
The default permissions for ramfs is 0755.
2014-01-23 12:01:53 -06:00
William Hubbs
561b53ef09 bootmisc: Remove console directories only if $RC_LIBEXECDIR is writable
X-Gentoo-Bug: 489368
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=489368
2014-01-15 10:43:52 -06:00
William Hubbs
8352082eb6 devfs: add code to mount /dev
All Linux systems need /dev to be set up,so add code to devfs to do
this. The process devfs follows is below.

1. If static_dev is yes, nothing is done.
2. if /dev is an entry in fstab it is mounted or remounted based on that
entry.
3. If /dev is not in fstab, it attempts to mount /dev as a devtmpfs or
   tmpfs depending on which is defined in the kernel; devtmpfs is
   preferred.
4. If neither devtmpfs nor tmpfs is defined, it assumes the user wants
static /dev and prints a warning.

X-Gentoo-Bug: 492694
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=492694
2014-01-05 11:17:05 -06:00
William Hubbs
3470eda3f5 Rename runscript to openrc-run
This was requested by Debian, because the minicom software, which is
available on Debian and other distros, has a binary named runscript. We
are keeping a backward compatibility symlink for now, but this allows
Debian or any other distro to safely remove the symlink.

X-Gentoo-Bug: 494220
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=494220
2013-12-29 22:57:31 -06:00
Petre Rodan
235f94c4c5 bootmisc.in: fix boot order
Bootmisc was running before the root file system was remounted rw in
some situations. This fixes that issue.

X-Gentoo-Bug: 493442
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=493442
2013-12-08 12:42:31 -06:00
Andrew Gregory
d711663189 network.in: skip loopback device
The loopback interface is supposed to be handled by the loopback
service, but sys_interfaces includes it.  This causes network to try to
start it and means that network provides net even if lo is the only
interface configured.

Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2013-12-06 13:24:58 -06:00
William Hubbs
60d288a877 remove type command
The posix equivalent of the type command is "command -v", so now we use
that. Thanks to Jonathan Callen <jcallen@gentoo.org> for informing me
wrt the fix.
2013-12-02 02:08:40 -06:00
William Hubbs
579838d2e7 bootmisc: do not run clean_run on VSERVER systems
X-Gentoo-Bug: 489370
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=489370
2013-10-28 15:21:50 -05:00
William Hubbs
9238d94d64 loopback: do not run in a prefix or vserver
X-Gentoo-Bug: 489370
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=489370
2013-10-28 12:37:22 -05:00
William Hubbs
d2988dc7dd remove redundant sync calls
The localmount and mount-ro scripts were flushing pending disk writes by
calling sync twice in succession. This is no longer necessary; see the
bug report and blog post for reasons we were still doing this.

Reported-by: Patrick Lauer <patrick@gentoo.org>
X-Gentoo-Bug: 487382
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487382
2013-10-18 16:32:51 -05:00
Alexander V Vershilov
66970394ab Add uml keyword to fsck service.
Fix relevant an issue mentioned by Toralf Förster.

X-Gentoo-Bug: 481096.
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=481096
2013-10-14 17:05:19 -05:00
William Hubbs
4b37d3b16f netmount: add -lxc keyword
Netmount should not run on lxc, thanks to Mark van Dijk <funtoo@internecto.net>.
2013-10-08 10:34:45 -05:00
Daniel Robbins
e6df76a377 FL-786: localmount: support filesystem mounting on openvz 2013-10-04 15:16:05 -05:00
William Hubbs
4ce3cb90a0 init.d: update ignore patterns
Remove net.lo* from the ignore pattern since these scripts are no longer
part of OpenRC and add loopback and tmpfiles.dev.
2013-09-01 16:30:18 -05:00
William Hubbs
838c9efb36 Remove gentoo's net.* scripts
It has been determined that it will be best for gentoo's net.* scripts
to be in a separate package to allow independent development.
This package will be called netifrc and maintained by Gentoo.
2013-08-13 16:33:41 -05:00
Fedja Beader
6b0ffd3103 Fix Permission Denied on reading dmesg in an LXC container 2013-08-06 00:27:30 +02:00
Alexander V Vershilov
1c94d793c0 devfs: Add -lxc keyword
Devfs is not needed for LXC, as LXC mounts all required fs on
it's own. Reported by specing.
2013-07-31 12:40:56 -05:00
William Hubbs
e942e88b8c swapfiles: do not try to unmount all tmpfs mounts
This is handled in the swap script, so it should not be done here as
well.

X-Gentoo-Bug: 477534
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=477534
2013-07-26 12:15:29 -05:00
William Hubbs
35f2f1ec73 Introduce the tmpfiles.dev service
This service handles setting up the tmpfiles entries for the /dev
directory for Linux systems which needs to be run in the sysinit
runlevel.
2013-07-25 13:53:44 -05:00
Robin H. Johnson
02a7d3573d efivarfs: Support EFI variable access in 3.10 kernels.
In the 3.10 kernel, EFI variables are now provided by a dedicated
filesystem that needs to be mounted.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2013-06-24 15:42:56 -05:00
Eugeny Shkrigunov
10eabd4d92 fsck: fix typo
X-Gentoo-Bug: 467158
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=467158
2013-04-27 10:26:37 -05:00
William Hubbs
56f1752ce1 create loopback service
The loopback service handles the basic settings for the loopback
interface, regardless of the network manager you are using.
2013-04-08 12:46:51 -05:00
William Hubbs
19fa20832c localmount: add "no" in front of network file system types
On Linux, this was not an issue, but we may have been attempting to
mount network file systems twice on *bsd.

Reported-by: powerman-asdf@yandex.ru
x-Gentoo-Bug: 462210
x-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=462210
2013-03-22 14:50:27 -05:00
Yuta SATOH
f1ae8963c9 oldnet: convert netmask to decimal numbers in _netmask2cidr
Free BSD's ifconfig outputs a netmask in the form 0xffffff00, which
was translating to 0xff.0xff.0xff.0x00,. Now we convert this to decimal
numbers before we convert it to cidr notation.

Reported-by: 4glitch@gmail.com
X-Gentoo-Bug: 460268
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=460268
2013-03-08 15:30:36 -06:00
William Hubbs
3b05586a73 ipfw: change opts variable to extra_commands
Reported-by: 4glitch@gmail.com
X-Gentoo-Bug: 459694
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=459694
2013-03-06 12:48:20 -06:00
Andrew Gregory
8a44067838 Fix shebangs in services to point to the correct location of runscript
SBINDIR and BINDIR can be set independently of PREFIX.  This fixes
broken shebangs in service files when SBINDIR is set to something other
than PREFIX/sbin

Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2013-02-23 20:30:39 -06:00
Andrew Gregory
89bb04a01a do not use SYSCONFDIR for binfmt.d
This makes binfmt.d consistent with tmpfiles.d and systemd which uses
hard coded paths for both.

Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2013-02-16 20:46:34 -06:00
Andrew Gregory
746bf5f783 consolefont: use setfont to save the current font
Using setfont directly to save the font prevents breakage
when a distro stores consolefonts in a location other than
/usr/share/consolefonts such as Arch which stores them in
/usr/share/kbd/consolefonts

Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2013-02-16 19:51:15 -06:00
William Hubbs
1831e433a0 bootmisc: Skip cleaning /var/run or tmp directories if they are tmpfs
Reported-by: walter@pratyeka.org
X-Gentoo-Bug: 454338
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=454338
2013-02-16 02:06:26 -06:00
William Hubbs
86dbd757e9 keymaps: fix the use of loadkeys in the euro fix
The loadkeys man page states that if you don't pass a filename loadkeys
will read from stdin. However, this is not correct, so we now pass "-"
as the filename to explicitly request stdin.

Reported-by: andi@grois.info
X-Gentoo-Bug: 457524
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=457524
2013-02-15 16:09:49 -06:00
William Hubbs
f30eec03ce devfs: Mount the posix message queue file system
Reported-by: reuben.m@gmail.com
X-Gentoo-Bug: 456998
X-Gentoo-Bug: https://bugs.gentoo.org/show_bug.cgi?id=456998
2013-02-14 17:53:53 -06:00
William Hubbs
5bfebbecea Rename shutdown_network setting to keep_network
We were telling users that setting shutdown_network=YES would shut down
the network interfaces during shutdown, but this was exactly the
opposite of what we were doing. The default was YES, which was keeping
the interfaces active.

This keeps the default behavior, but renames the setting to keep_network
which more accurately describes its function, and instructs users to set
it to NO if they want the network interfaces to go down.
2013-02-11 09:45:14 -06:00
William Hubbs
1280b97749 oldnet: add support for shutdown_network from newnet
This setting, already in use in newnet, allows the user to control
whether network interfaces are stopped when the system shuts down. By
default, under newnet, they are not, so I am making oldnet have the same
default.

A side-affect of this is that in the default configuration this fixes
bugs like the one below.

Reported-by: jerryfleming2006@gmail.com
X-Gentoo-Bug: 259183
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=259183
2013-02-11 09:08:34 -06:00
William Hubbs
bbc6b96a40 oldnet: accomodate rkhunter false positive
rkhunter thinks OpenRC is a rootkit because of the hidefirstrout
variable. This has been renamed to hideFirstroute in order to get past
rkhunter.

I realize this is not an openrc bug. In this case though I do not have a
problem renaming the variable.

Reported-by: ago@gentoo.org
X-Gentoo-Bug: 339714
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=339714
2013-02-09 17:39:32 -06:00
William Hubbs
8a6c3391bd sysfs: mount the fusectl file system
Reported-by: vapier@gentoo.org
X-Gentoo-Bug: 453740
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=453740
2013-02-01 13:49:02 -06:00
William Hubbs
8be072628c remove cruft from /run directory
The /run directory is a mount point for a tmpfs and should not contain
any files or directories.  This cleans out the /run/openrc
symlink and any other files which were incorrectly placed in /run.
Thanks to Ian Stakenvicius for pointing out this solution.
2013-01-31 12:11:53 -06:00
Alexander Tsoy
2b0ff6f669 net.lo: add ipv6 net and host patterns
X-Gentoo-Bug: 442594
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=442594
2012-12-21 14:24:27 -06:00