Make sure that the `cd` into the $dir actually happened. This we don't
have to worry about relative paths deleting stuff it shouldn't. This
step shouldn't fail, but who knows, and better to be sane than to wipe
out someone's valuables.
When wiping, automatically fall back to a dedicated `find` if the initial
`rm` failed on us. This should help with the speed issues related to the
later `find`.
Have the later find only search the top level allowing `rm` to walk the
directory contents. This means that -xdev no longer applies, but since
the earlier `rm` wasn't doing -xdev either and no one has complained thus
far, let's assume it isn't an issue. Also convert to the -exec...+ form
so that we don't have to worry about long argument lists, and add -- to
the `rm` that was previously missing. In practice, this shouldn't matter
as we've already deleted all those files, but better safe than sorry.
When cleaning, since we've already done a `cd` into the $dir, no point in
prefixing all the paths with $dir too. Go with the relative loving.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
X-Gentoo-Bug: 359831
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=359831
The previous test assumed that we could always rely on the minor fault
counter to change between reads of /proc/self/stat, but we found that
this is not the case.
The new test compares two reads of /proc/self/environ for which we have
set the same environment variable to two different values.
If the comparison shows the two reads have the same contents, we know
that /proc is not working.
I would like to thank Robin Johnson and Mike Frysinger for their input
for this patch.
X-Gentoo-Bug: 348416
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=348416
The documentation makes a recommendation for the setting but does not
state the purpose of the variable.
X-Gentoo-Bug: 357869
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357869
Originally the plan was to deprecate this code, but this will not be
happening. There are some subsystems which can still be autodetected, so
we are keeping this code and allowing users to override the automatic
detection with this variable as well as set it to other subtypes we
cannot autodetect.
X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
X-Gentoo-Bug: 359311
X-Gentoo-Bug-URL: http://bugs.gentoo.org/359311
Reported-by: Raffaello D. Di Napoli <fastijum@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The default rc_sys behavior was changed to always require manual
intervention by users. This pretty much breaks all of the diff
system variants out there if people don't explicitly edit their
rc.conf file ahead of time. We should have things work "out of
the box" as much as possible and reasonable.
X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/357247
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Since mount-ro needs to run unconditionally, we need to have savecache
report that it ran successfully when the system is shutting down.
X-Gentoo-Bug: 356393
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=356393
This allows the default value of rc_sys to be set when openrc is
compiled. This will allow openrc to be installed, e.g. on vserver guests
and will allow them to be rebooted without the need to edit rc.conf.
This patch is a combined effort between myself and Robin Johnson.
X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
Implement a consistent interface for changing ethtool parameters, as
suggested in bug 195479. All variable names are based on the long option
to ethtool to set each group of parameters. Multiple entries seperated
by newlines are permitted for variable values.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 195479
Tunnel modes ipip6 and ip6ip6 require an explicit family selection for
the ip tunnel call.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 347657
This replaces the vlan setup code that previously used the old vconfig
binary with a new implementation using the iproute2 interface.
vconfig does not handle many of the newer setups. No automatic migration
path is provided, as altering the configuration is non-trivial.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Written-by: Guillaume Castagnino <casta@xwing.info>
X-Gentoo-Bug: 346365
This reworks the implementation of the --applet option so that it is
processed in run_applets() and does not require two calls to the
getopts_long() function. It is based on code by Robin Johnson and Chris
Richards.
X-Gentoo-Bug: 351712
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=351712
Parisc generates a few relocs against internal symbols which are OK.
X-Gentoo-Bug: 258913
X-Gentoo-Bug-URL: http://bugs.gentoo.org/258913
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
We need to set the timezone for the system clock even when we allow the
kernel to set the time.
X-Gentoo-Bug: 248131
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=248131
The target for the symlinks in ${SBINDIR} (the same directory as the rc
binary) was "rc". This is not correct; the target should be
${SBINDIR}/rc instead.
This allows error checking inside the included files instead of either
including the appropriate file or a blank file.
Also the blank file named .mk gets removed by this change.
The main makefile, init.d/Makefile and src/librc/Makefile all contain
several shell calls which can be handled as make conditionals. This
switches them to conditionals.
This reworks the shell calls in the makefiles to use immediate
evaluation and should improve parallel building.
X-Gentoo-Bug: 289264
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=289264
Update the documentation to state that openrc only works with gnu make.
This needs to be done in order to address the parallel build issue.
X-Gentoo-Bug: 289264
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=289264
This commit adds the clock_hctosys option which is used to skip setting
the system clock on boot and can be used with a modern linux kernel
which has the CONFIG_RTC_HCTOSYS option set to y.
I would like to thank Dimitris Mandalidis for the report and for the
patch to baselayout-1 on which my changes to openrc are based.
X-Gentoo-Bug: 248131
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=248131
This changes the local service so that it will run programs located in
@sysconfdir@/local.d instead of the local_start and local_stop functions
from @sysconfdir@/conf.d/local.
The advantage for the user is that these programs are not part
of the openrc package, so the user does not have to worry about them
being overwritten when openrc is upgraded.
X-Gentoo-Bug: 351465
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=351465
Previously we checked if /proc was alive by reading /proc/uptime twice
with a 1 second sleep between calls, so that it had time to update.
This got a complaint of an entire 1 second delay, so we improve the
check to be much faster without sleep. We cannot continue to use
/proc/uptime as it only has a 10ms resolution.
X-Gentoo-Bug: 348416
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=348416
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Refactor rc_conf_value into librc for use in library context.
Also requires moving:
- rc_conf internal static
- Defines: PROFILE_ENV, SYS_WHITELIST, USR_WHITELIST, RC_PATH_PREFIX
moved to rc.h with new RC_ prefix added.
- Defines: RC_CONF, RC_CONF_OLD moved to rc.h.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
