SBINDIR and BINDIR can be set independently of PREFIX. This fixes
broken shebangs in service files when SBINDIR is set to something other
than PREFIX/sbin
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
This makes binfmt.d consistent with tmpfiles.d and systemd which uses
hard coded paths for both.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Using setfont directly to save the font prevents breakage
when a distro stores consolefonts in a location other than
/usr/share/consolefonts such as Arch which stores them in
/usr/share/kbd/consolefonts
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
The loadkeys man page states that if you don't pass a filename loadkeys
will read from stdin. However, this is not correct, so we now pass "-"
as the filename to explicitly request stdin.
Reported-by: andi@grois.info
X-Gentoo-Bug: 457524
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=457524
We were telling users that setting shutdown_network=YES would shut down
the network interfaces during shutdown, but this was exactly the
opposite of what we were doing. The default was YES, which was keeping
the interfaces active.
This keeps the default behavior, but renames the setting to keep_network
which more accurately describes its function, and instructs users to set
it to NO if they want the network interfaces to go down.
This setting, already in use in newnet, allows the user to control
whether network interfaces are stopped when the system shuts down. By
default, under newnet, they are not, so I am making oldnet have the same
default.
A side-affect of this is that in the default configuration this fixes
bugs like the one below.
Reported-by: jerryfleming2006@gmail.com
X-Gentoo-Bug: 259183
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=259183
rkhunter thinks OpenRC is a rootkit because of the hidefirstrout
variable. This has been renamed to hideFirstroute in order to get past
rkhunter.
I realize this is not an openrc bug. In this case though I do not have a
problem renaming the variable.
Reported-by: ago@gentoo.org
X-Gentoo-Bug: 339714
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=339714
The /run directory is a mount point for a tmpfs and should not contain
any files or directories. This cleans out the /run/openrc
symlink and any other files which were incorrectly placed in /run.
Thanks to Ian Stakenvicius for pointing out this solution.
For devices that are always connected (e.g. ethernet cards), the current
carrier always wastes time by sleeping for 1 second. This is because the
code sleeps first, then checks for carrier. Invert the order so that we
return quickly for devices already active. For devices which are not yet
up, there shouldn't be any real difference.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Add a test when localmount is started to determine if /usr is mounted
from inside an initramfs for Linux systems. If it is not, we can unmount it when
localmount stops.
On *bsd systems, we always unmount /usr if it is separate.
Reported-by: ryao@gentoo.org
In a pathname expansion, specifically single-character match, the pure
POSIX specification uses '!' as the Negation character where a regular
expression would normally be '^'.
Regular expression: "a[^a]a"
Pathname expansion pattern: "a[!a]a"
Reference:
IEEE Std 1003.1, 2004 Edition
2. Shell Command Language
2.13 Pattern Matching Notation
2.13.1 Patterns Matching a Single Character
> The description of basic regular expression bracket expressions in the
> Base Definitions volume of IEEE Std 1003.1-2001, Section 9.3.5, RE
> Bracket Expression shall also apply to the pattern bracket expression,
> except that the exclamation mark character ( '!' ) shall replace the
> circumflex character ( '^' ) in its role in a "non-matching list" in
> the regular expression notation. A bracket expression starting with an
> unquoted circumflex character produces unspecified results.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Initially, we were creating tmpfiles entries in the sysinit runlevel and
again in the boot runlevel. Systemd runs the --create and --remove
options in one service called systemd-tmpfiles-setup after the local
file systems are mounted. Now we have a service called tmpfiles.setup
which emulates this.
This also closes the bug mentioned below, since we were originally
writing to files that were on read-only file systems and that were not
available.
Reported-by: <devurandom@gmx.net>
X-Gentoo-Bug: 439012
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439012
Some types of interfaces do not have a carrier, so it doesn't make sense
to automatically wait for one.
Reported-by: <rose@rz.uni-potsdam.de>
X-Gentoo-Bug: 438970
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=438970
There were references in the devfs script to mdev, udev and
udev-mount. These all provide the virtuals dev and dev-mount; that is
how we should refer to them.
I believe in the discussion I had with Tony and Robin about this, we
were going to change the "use" line to "need". However, after thinking
that over, I'm not comfortable doing so because someone could be running
a static /dev with no device manager.
Reported-by: <tokiclover@gmail.com>
X-Gentoo-Bug: 438932
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=438932
Now that the tmpfiles.d code is more tested, actually call it from
init.d. It assumes that /run is already available when it runs.
Please note it runs TWICE.
- During sysinit, ideally just after /dev/shm is created, but before
udev has started. After udev is also acceptable, but not ideal.
- During boot, ideally just after localmount has completed.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Using the new dev-mount virtual, with udev-mount included until new udev
version is rolled out, we run devfs earlier now, before udev/mdev.
It only needs (u)dev-mount before it, so that /dev is mounted.
This opens the way for tmpfiles.d, which needs to be sandwiched in the
middle.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Urandom should not run in lxc containers since it is provided by the
host.
Reported-by: <walter@pratyeka.org>
X-Gentoo-Bug: 436270
X-Gentoo-Bug-URL: http://bugs.gentoo.org/436270
Since nfs and nfs4 file systems require extra daemons to be running on
the client to function properly, netmount should not try to handle these
file systems.
Reported-by: <devurandom@gmx.net>
X-Gentoo-Bug: 427996
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=427996
This is needed in case of a read-only root filesystem such as a diskless
client.
Reported-by: <walter@pratyeka.org>
X-Gentoo-Bug: 430382
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=430382
If CONFIG_SWAP is turned off in the kernel, this file may not exist. In
that case, we should not try to read from it.
reported-by: <walter@pratyeka.org>
X-Gentoo-Bug: 430378
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=430378
The OpenRC upstream default network stack was changed, but there was no
reason to change it. Now since we have the MKNET build switch, it is
easy for the gentoo ebuild to install oldnet by default.
The upstream default is newnet.
The MKNET variable can be used to select the network stack you want to
build and install with OpenRC.
The current default is the gentoo "oldnet" stack. If you want to install
the OpenRC newnet stack, use MKNET=newnet on the make command line.
This reverts commit 5994e55937.
There are situations where these scripts can be useful, so I am bringing
them back. Also, I want to start discussions about simplifying the
OpenRC network stack.
On linux systems, fsck was not taking into account which filesystems
were local or remote. This commit adds the -t option, with an
appropriate value, to the fsck call so that remote file systems are not
checked.
reported-by: Vladimir Berezhnoy <non7top@gmail.com>
X-Gentoo-Bug: 408363
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=408363
Make the stop function in localmount only unmount file systems when the
system is going down.
reported-by: Alexey Prokopchuk <alexpro@homelan.lg.ua>
X-Gentoo-Bug: 407167
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=407167
The -q option is not implemented by BusyBox, so instead of using that, make
it so that the standard error is caught, but standard output is thrown
away.
Note: the ordered behaviour of redirection is part of POSIX so we should be
on the safe side with this change, as first we duplicate the output
descriptor to be used as stderr, then we change the output descriptor to
point to NULL.
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
This reverts commit 06d6701785.
After researching this further, we do need this commit. The other issue
is a bug in fstabinfo which will also need to be fixed.
There are several reasons for going back to this:
- fstabinfo doesn't work with labels in fstab
- when a device is passed to swapon individually, the swap priority from
fstab is not honored.
- We also add the -e option to only activate available swap devices.
reported-by: Duncan <1i5t5.duncan@cox.net>
X-Gentoo-Bug: 405021
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=405021
I was informed that "provide net" should mean that there is network
communication outside the local computer. In this case, the loopback
interface can't "provide net", but there needs to be a way for other
processes to know that the loopback interface is active.
To this end, this commit makes the loopback "provide lo" and all other
interfaces "provide net".
Previously, the default on linux systems was to not set the hardware
clock to match the system clock during shutdown.
This changes that default to be consistent with *bsd and swclock.
The clock_hctosys and clock_systohc settings really do not have anything
to do with running an ntp daemon, so remove that reference from the
documentation.
Reported-by: Milos Ivanovic <milosivanovic@orcon.net.nz>
X-Gentoo-Bug: 401433
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401433
Modify the swap script so it starts before and stops after localmount.
Also, on linux, this script should skip mounting swap on loopback.
Add a swapfiles script which runs after localmount and is designed to
activate additional swap space which could not be activated before
localmount was run. This includes loopback swap on linux and swapfiles
which are on local file systems that were not mounted when swap was
activated initially.
The start code does reactivate swap that is already active, but this is
not an error condition.
Reported-by: Giampaolo Tomassoni <giampaolo@tomassoni.biz>
X-Gentoo-Bug: 401003
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401003
This allows root to be removed from the boot runlevel which is needed
sometimes when the root fs is mounted read-only.
Reported-By: Maxim Kammerer <mk@dee.su>
X-Gentoo-Bug: 400921
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400921
This was modified by William Hubbs to use the checkpath helper and to
improve readability.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
(tested with genkernel /usr mount changes);
This reverts commit 6d5a2d5f9e.
There are interfaces, such as adsl and ppp interfaces which need to be
brought down. Also, the WOL setting is a good case for bringingdown
interfaces.
This is based on a patch submitted by the reporter; however, there was
another mount command which needed -n as well so it was added to the
patch.
Reported-by: Ben Kohler <bkohler@gmail.com>
X-Gentoo-Bug: 400967
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400967
We need to make sure this directory is a mount point before we add the
control groups.
Reported-by: Andrej Filipcic <andrej.filipcic@ijs.si>
X-Gentoo-Bug: 400903
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400903
Baselayout-1.x used to have a DELAYLOGIN option where it would setup
/etc/nologin automatically and then delete it later on. OpenRC did
not keep that feature, and during the rewrites, ended up just punting
it all the time. This isn't what we intended, so drop the rm.
X-Gentoo-Bug: 400837
X-Gentoo-Bug-URL: https://bugs.gentoo.org/400837
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
In the case of a single line of configuration, where the address has
parameters, the parameters were being treated as seperate addresses.
Eg:
config_eth0="4321:0:1:2:3:4:567:89ab/64 nodad home preferred_lft 0"
Also document usage of parameters in the net example, and note that
multiple addresses on a single line cannot be mixed with parameters.
Newlines are required to seperate the addresses.
X-Gentoo-Bug: 398827
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=398827
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The program function in depend blocks is now able to search paths by
itself. If passed multiple arguments or multiple calls, at least one of
the arguments passed must be a program or a shell builtin (eg ip built
into busybox). If a qualified path is specified, only that path will be
checked, otherwise it will be checked as a builtin, then $PATH will be
checked for the named binary (via type).
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Some of the networking tools, such as iproute2, can be stored in one of
several locations. This function gives us a standard way to find these
tools.
I would like to thankRobin Johnson <robbat2@gentoo.org> for his input on
this function.
