2015-08-19 10:30:00 +05:30
|
|
|
/*
|
library: removed all the 'PROCPS_' enumerator prefixes
Many of our item enumerator identifiers are very long,
especially in that <VMSTAT> module. Additionally, they
all contain the exact same universal 'PROCPS_' prefix.
The origins for this are likely found in the desire to
avoid name clashes with other potential include files.
But with procps-ng newlib, we've probably gone way too
far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more
protection against clash than 'PIDS_TICS_SYSTEM' does?
I don't think so. Besides, no matter how big that name
becomes, one can never guarantee they'll never be some
clash. And, conversely, extremely short names will not
always create conflict. Of course, in either case when
some clash occurs, one can always #undef that problem.
Thus, this commit will eliminate that 'PROCPS_' prefix
making all of those enum identifiers a little shorter.
And, we'll still be well above some ridiculously short
(criminally short) names found in some common headers:
- - - - - - - - - - <term.h>
- 'tab', 'TTY', etc
- - - - - - - - - - - - - - - - <search.h>
- 'ENTER', ENTRY', 'FIND', etc
------------------------------------------------------
Finally, with this as a last of the wholesale changes,
we will have established the naming conventions below:
. only functions will begin with that 'procps_' prefix
. exposed structures begin with the module/header name
. item enumerators begin like structs, but capitalized
. other enumerators work exactly like item enumerators
. macros and constants begin just like the enumerators
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
|
|
|
* libprocps - Library to read proc filesystem
|
2015-08-19 10:30:00 +05:30
|
|
|
*
|
|
|
|
|
* Copyright (C) 1998-2005 Albert Cahalan
|
|
|
|
|
* Copyright (C) 2015 Craig Small <csmall@enc.com.au>
|
|
|
|
|
* Copyright (C) 2015 Jim Warner <james.warner@comcast.net>
|
|
|
|
|
*
|
|
|
|
|
* This library is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This library is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
|
* Lesser General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
|
|
|
* License along with this library; if not, write to the Free Software
|
|
|
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
|
|
|
*/
|
|
|
|
|
|
2016-09-28 20:40:10 +05:30
|
|
|
#ifndef PROCPS_PIDS_H
|
|
|
|
|
#define PROCPS_PIDS_H
|
library: removed all the 'PROCPS_' enumerator prefixes
Many of our item enumerator identifiers are very long,
especially in that <VMSTAT> module. Additionally, they
all contain the exact same universal 'PROCPS_' prefix.
The origins for this are likely found in the desire to
avoid name clashes with other potential include files.
But with procps-ng newlib, we've probably gone way too
far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more
protection against clash than 'PIDS_TICS_SYSTEM' does?
I don't think so. Besides, no matter how big that name
becomes, one can never guarantee they'll never be some
clash. And, conversely, extremely short names will not
always create conflict. Of course, in either case when
some clash occurs, one can always #undef that problem.
Thus, this commit will eliminate that 'PROCPS_' prefix
making all of those enum identifiers a little shorter.
And, we'll still be well above some ridiculously short
(criminally short) names found in some common headers:
- - - - - - - - - - <term.h>
- 'tab', 'TTY', etc
- - - - - - - - - - - - - - - - <search.h>
- 'ENTER', ENTRY', 'FIND', etc
------------------------------------------------------
Finally, with this as a last of the wholesale changes,
we will have established the naming conventions below:
. only functions will begin with that 'procps_' prefix
. exposed structures begin with the module/header name
. item enumerators begin like structs, but capitalized
. other enumerators work exactly like item enumerators
. macros and constants begin just like the enumerators
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
|
|
|
|
2018-04-06 10:30:00 +05:30
|
|
|
#ifdef __cplusplus
|
|
|
|
|
extern "C" {
|
|
|
|
|
#endif
|
2015-08-19 10:30:00 +05:30
|
|
|
|
|
|
|
|
enum pids_item {
|
library: removed all the 'PROCPS_' enumerator prefixes
Many of our item enumerator identifiers are very long,
especially in that <VMSTAT> module. Additionally, they
all contain the exact same universal 'PROCPS_' prefix.
The origins for this are likely found in the desire to
avoid name clashes with other potential include files.
But with procps-ng newlib, we've probably gone way too
far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more
protection against clash than 'PIDS_TICS_SYSTEM' does?
I don't think so. Besides, no matter how big that name
becomes, one can never guarantee they'll never be some
clash. And, conversely, extremely short names will not
always create conflict. Of course, in either case when
some clash occurs, one can always #undef that problem.
Thus, this commit will eliminate that 'PROCPS_' prefix
making all of those enum identifiers a little shorter.
And, we'll still be well above some ridiculously short
(criminally short) names found in some common headers:
- - - - - - - - - - <term.h>
- 'tab', 'TTY', etc
- - - - - - - - - - - - - - - - <search.h>
- 'ENTER', ENTRY', 'FIND', etc
------------------------------------------------------
Finally, with this as a last of the wholesale changes,
we will have established the naming conventions below:
. only functions will begin with that 'procps_' prefix
. exposed structures begin with the module/header name
. item enumerators begin like structs, but capitalized
. other enumerators work exactly like item enumerators
. macros and constants begin just like the enumerators
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
|
|
|
PIDS_noop, // ( never altered )
|
|
|
|
|
PIDS_extra, // ( reset to zero )
|
library: add item origin (as comments) to header files
A lack of documentation seems to be the major obstacle
to releasing this new library. So, in an effort to get
the ball rolling again, this patch adds the origins of
each item as a comment to six of the new header files.
However, before reviewing how such changes may benefit
that documentation objective, it seemed appropriate to
first reflect on newlib's background & current status.
___________________________________________ BACKGROUND
Discussions about and work on a new library began back
in July 2012 but quickly died. After a lull of 2 years
those discussions were resumed in August 2014 but soon
died also (and no code survived the gitorious demise).
With those early discussions, the recommended approach
was to encapsulate all of the libprocps data offerings
in individual functions. When it came to extensibility
it was suggested we should rely on symbols versioning.
Unfortunately that approach would have made for a huge
Application Programming Interface virtually impossible
to master or even document. And, runtime call overhead
would have been substantial for ps and especially top.
So, an alternative design was sought but there were no
new suggestions/contributions via freelists or gitlab.
Thus, in spite of a lack of library design experience,
the procps-ng team (Craig & Jim) set out to develop an
alternative API, more concise and with lower overhead.
Reference(s):
. 07/01/2012, begin library design discussion
https://www.freelists.org/post/procps/Old-library-calls
. 08/12/2014, revival of library design discussion
https://www.freelists.org/post/procps/libprocs-redesign
_____________________________________ DESIGN EVOLUTION
Our newlib branch first appeared on June 14, 2015. And
our current API actually represents the 4th generation
during the past 3 years of evolution. First, there was
a basic 'new', 'get' and 'unref' approach, using enums
to minimize the proliferation of 'get' function calls.
Then, in anticipation of other programs like ps, where
multiple fields times multiple processes would greatly
increase the number of 'get' function calls, a concept
of 'chains' was introduced. This became generation #2.
Such 'chains' proved unnecessarily complex so 'stacks'
replaced them. This was considered the 3rd generation,
but too many implementation details were still exposed
requiring those users to 'alloc', 'read', 'fill', etc.
Finally, a 4th generation emerged representing several
refinements to standardize and minimize those exported
functions, thus hiding all implementation details from
the users. Lastly, handling of 'errno' was normalized.
Reference(s):
. 06/14/2015, revival of new API discussion
https://www.freelists.org/post/procps/The-library-API-again
. 06/24/2015, birth of the newlib branch
https://www.freelists.org/post/procps/new-library
. 06/29/2015, 2nd generation introduced 'chains'
https://www.freelists.org/post/procps/new-library,8
. 07/22/2015, 3rd generation introduced 'stacks'
https://www.freelists.org/post/procps/newlib-stacks-vs-chains
. 06/18/2016, 4th generation refinements begin
https://www.freelists.org/post/procps/newlib-generation-35
. 11/10/2017, 4th generation standardized 'errno'
https://www.freelists.org/post/procps/some-more-master-newlib-stuff
_______________________________________ CURRENT DESIGN
Central to this new design is a simple 'result' struct
reflecting an item plus its value (thanks to a union).
As a user option, these item structures can be grouped
into 'stacks', yielding many results with just 1 call.
Such a 'stack' can be seen as a variable length record
whose content/order is determined solely by the users.
Within that 'result' structure, the union has standard
C language types so there is never a doubt how a value
should be used in a printf statement. Given that linux
requires a least a 32-bit platform the only difference
in capacity surrounds 'long' integers. And, where such
types might be used, the 32-bit maximums are adequate.
The items themselves are simply enumerators defined in
the respective header files. A user can name any items
of interest then the library magically provides result
structure(s). The approach was proven to be extensible
without breaking the ABI (in commit referenced below).
The 6 major APIs each provide for the following calls:
. 'new' ---------> always required as the first call .
. 'ref' -------------------------> strictly optional .
. 'unref' --------> optional, if ill-behaved program .
. 'get' --------------------> retrieve a single item .
. 'select' ----------------> retrieve multiple items .
And the 'get' and 'select' functions provide for delta
results representing the difference between successive
get/select calls (or a 'new' then 'get/select' call).
For the <diskstats>, <pids>, <slabinfo> & <stat> APIs,
where results are unpredictable, a 'reap' function can
return multiple result structures for multiple stacks.
The <pids> API differs from others in that those items
of interest must be provided at 'new' or 'reset' time,
a function unique to this API. And the <pids> 'select'
function requires PIDs or UIDs which are to be fetched
which then operates as a subset of 'reap'. Lastly, the
'get' function is an iterator for successive PIDs/TIDs
returning items previously identified via 'new/reset'.
To provide assistance to users during development, the
special header 'proc/xtra-procps-debug.h' is available
to check type usage against library expectations. That
check is activated by including this header explicitly
or via build using: ./configure '-DXTRA_PROCPS_DEBUG'.
Reference(s):
. 08/05/2016, type validation introduced
https://www.freelists.org/post/procps/newlib-types-validation
commit e3270d463de7eebd9f5ae20c85495e3cb5b69a9f
. 08/11/2016, extensibility while preserving ABI example
https://www.freelists.org/post/procps/new-meminfo-fields
commit 09e1886c9e731f8b8c89a55d11f72f53f030b2de
_________________________ INITIAL DOCUMENTATION EFFORT
The initial attempt, referenced below, dealt primarily
with the <pids> interface. Separate man pages for each
exported function were created. Plus there was another
document describing the items, among other miscellany.
Adopting such an approach encounters several problems:
1. In order to use these man pages, users are required
to already know how to use the library. Or alternately
one could randomly search each of them while trying to
ascertain which function call satisfies their need and
what exactly was the proper compliment/order required.
2. While we can explain what all of those <pids> items
represent, that certainly isn't true for all the APIs.
See the gaps in kernel documentation for <meminfo> and
complete lack of documentation with that <vmstat> API.
3. Our documentation effort should take pains to avoid
unnecessary implementation details. Here's an example:
. "The pointer to info will have memory"
. "allocated and a structure created."
Alternatively, the following conveys user requirements
while not offering any internal implementation detail:
. "You must provide the address of a NULL"
. "info structure pointer."
Reference(s):
. 01/04/2017, initial documentation offering
https://www.freelists.org/post/procps/Using-reap-and-get
commit 2598e9f2ce39c93ebf55f664454d3bea919ed4e0
___________________ RECOMMENDED DOCUMENTATION APPROACH
I recommend that the newlib documentation consist of 3
man pages only. The first would cover the 5 major APIs
and their common functions. The second would deal with
the <pids> API exclusively, explaining how it differs.
Any remaining exported libproc functions which are yet
to be included could be represented in a 3rd document.
For these new documents the following are are assumed:
1. Since we will not be able to document all items, we
shouldn't try to document any items. We should instead
rely on proc(5) or Documentation/filesystems/proc.txt.
2. Program development often involves referencing some
header file(s). So, make that an absolute requirement.
3. With the addition of item origins, represented with
this commit, and considering that 'types' were already
present, the header file might be all some users need.
4. And who knows, when a user of our libproc complains
about gaps in their documentation, it might prompt the
kernel folks to correct those long standing omissions.
To summarize, I suggest that we replace that libproc.3
document with a more general one explaining the basics
of accessing this new library and the common calls for
most of the major interfaces. We can then create a new
document (libproc-pids.3?), which explains differences
in using the <PIDS> application programming interface.
A final document (libproc-misc.3?) covers what's left.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-12-20 11:30:00 +05:30
|
|
|
// returns origin, see proc(5)
|
|
|
|
|
// ------- -------------------
|
library: refactored some header file items and origins
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46b3ff687bd29fad4708074a0e1cea14
. 01/2019, <stat> origins tweaked
commit 201e816b26ddaccc923ec40977c92037cdd0c34e
Signed-off-by: Jim Warner <james.warner@comcast.net>
2019-03-12 11:30:00 +05:30
|
|
|
PIDS_ADDR_END_CODE, // ul_int stat: endcode
|
|
|
|
|
PIDS_ADDR_KSTK_EIP, // ul_int stat: kstkeip
|
|
|
|
|
PIDS_ADDR_KSTK_ESP, // ul_int stat: kstkesp
|
|
|
|
|
PIDS_ADDR_START_CODE, // ul_int stat: startcode
|
|
|
|
|
PIDS_ADDR_START_STACK, // ul_int stat: statstack
|
|
|
|
|
PIDS_CGNAME, // str [ derived from CGROUP ':name=' ]
|
library: add item origin (as comments) to header files
A lack of documentation seems to be the major obstacle
to releasing this new library. So, in an effort to get
the ball rolling again, this patch adds the origins of
each item as a comment to six of the new header files.
However, before reviewing how such changes may benefit
that documentation objective, it seemed appropriate to
first reflect on newlib's background & current status.
___________________________________________ BACKGROUND
Discussions about and work on a new library began back
in July 2012 but quickly died. After a lull of 2 years
those discussions were resumed in August 2014 but soon
died also (and no code survived the gitorious demise).
With those early discussions, the recommended approach
was to encapsulate all of the libprocps data offerings
in individual functions. When it came to extensibility
it was suggested we should rely on symbols versioning.
Unfortunately that approach would have made for a huge
Application Programming Interface virtually impossible
to master or even document. And, runtime call overhead
would have been substantial for ps and especially top.
So, an alternative design was sought but there were no
new suggestions/contributions via freelists or gitlab.
Thus, in spite of a lack of library design experience,
the procps-ng team (Craig & Jim) set out to develop an
alternative API, more concise and with lower overhead.
Reference(s):
. 07/01/2012, begin library design discussion
https://www.freelists.org/post/procps/Old-library-calls
. 08/12/2014, revival of library design discussion
https://www.freelists.org/post/procps/libprocs-redesign
_____________________________________ DESIGN EVOLUTION
Our newlib branch first appeared on June 14, 2015. And
our current API actually represents the 4th generation
during the past 3 years of evolution. First, there was
a basic 'new', 'get' and 'unref' approach, using enums
to minimize the proliferation of 'get' function calls.
Then, in anticipation of other programs like ps, where
multiple fields times multiple processes would greatly
increase the number of 'get' function calls, a concept
of 'chains' was introduced. This became generation #2.
Such 'chains' proved unnecessarily complex so 'stacks'
replaced them. This was considered the 3rd generation,
but too many implementation details were still exposed
requiring those users to 'alloc', 'read', 'fill', etc.
Finally, a 4th generation emerged representing several
refinements to standardize and minimize those exported
functions, thus hiding all implementation details from
the users. Lastly, handling of 'errno' was normalized.
Reference(s):
. 06/14/2015, revival of new API discussion
https://www.freelists.org/post/procps/The-library-API-again
. 06/24/2015, birth of the newlib branch
https://www.freelists.org/post/procps/new-library
. 06/29/2015, 2nd generation introduced 'chains'
https://www.freelists.org/post/procps/new-library,8
. 07/22/2015, 3rd generation introduced 'stacks'
https://www.freelists.org/post/procps/newlib-stacks-vs-chains
. 06/18/2016, 4th generation refinements begin
https://www.freelists.org/post/procps/newlib-generation-35
. 11/10/2017, 4th generation standardized 'errno'
https://www.freelists.org/post/procps/some-more-master-newlib-stuff
_______________________________________ CURRENT DESIGN
Central to this new design is a simple 'result' struct
reflecting an item plus its value (thanks to a union).
As a user option, these item structures can be grouped
into 'stacks', yielding many results with just 1 call.
Such a 'stack' can be seen as a variable length record
whose content/order is determined solely by the users.
Within that 'result' structure, the union has standard
C language types so there is never a doubt how a value
should be used in a printf statement. Given that linux
requires a least a 32-bit platform the only difference
in capacity surrounds 'long' integers. And, where such
types might be used, the 32-bit maximums are adequate.
The items themselves are simply enumerators defined in
the respective header files. A user can name any items
of interest then the library magically provides result
structure(s). The approach was proven to be extensible
without breaking the ABI (in commit referenced below).
The 6 major APIs each provide for the following calls:
. 'new' ---------> always required as the first call .
. 'ref' -------------------------> strictly optional .
. 'unref' --------> optional, if ill-behaved program .
. 'get' --------------------> retrieve a single item .
. 'select' ----------------> retrieve multiple items .
And the 'get' and 'select' functions provide for delta
results representing the difference between successive
get/select calls (or a 'new' then 'get/select' call).
For the <diskstats>, <pids>, <slabinfo> & <stat> APIs,
where results are unpredictable, a 'reap' function can
return multiple result structures for multiple stacks.
The <pids> API differs from others in that those items
of interest must be provided at 'new' or 'reset' time,
a function unique to this API. And the <pids> 'select'
function requires PIDs or UIDs which are to be fetched
which then operates as a subset of 'reap'. Lastly, the
'get' function is an iterator for successive PIDs/TIDs
returning items previously identified via 'new/reset'.
To provide assistance to users during development, the
special header 'proc/xtra-procps-debug.h' is available
to check type usage against library expectations. That
check is activated by including this header explicitly
or via build using: ./configure '-DXTRA_PROCPS_DEBUG'.
Reference(s):
. 08/05/2016, type validation introduced
https://www.freelists.org/post/procps/newlib-types-validation
commit e3270d463de7eebd9f5ae20c85495e3cb5b69a9f
. 08/11/2016, extensibility while preserving ABI example
https://www.freelists.org/post/procps/new-meminfo-fields
commit 09e1886c9e731f8b8c89a55d11f72f53f030b2de
_________________________ INITIAL DOCUMENTATION EFFORT
The initial attempt, referenced below, dealt primarily
with the <pids> interface. Separate man pages for each
exported function were created. Plus there was another
document describing the items, among other miscellany.
Adopting such an approach encounters several problems:
1. In order to use these man pages, users are required
to already know how to use the library. Or alternately
one could randomly search each of them while trying to
ascertain which function call satisfies their need and
what exactly was the proper compliment/order required.
2. While we can explain what all of those <pids> items
represent, that certainly isn't true for all the APIs.
See the gaps in kernel documentation for <meminfo> and
complete lack of documentation with that <vmstat> API.
3. Our documentation effort should take pains to avoid
unnecessary implementation details. Here's an example:
. "The pointer to info will have memory"
. "allocated and a structure created."
Alternatively, the following conveys user requirements
while not offering any internal implementation detail:
. "You must provide the address of a NULL"
. "info structure pointer."
Reference(s):
. 01/04/2017, initial documentation offering
https://www.freelists.org/post/procps/Using-reap-and-get
commit 2598e9f2ce39c93ebf55f664454d3bea919ed4e0
___________________ RECOMMENDED DOCUMENTATION APPROACH
I recommend that the newlib documentation consist of 3
man pages only. The first would cover the 5 major APIs
and their common functions. The second would deal with
the <pids> API exclusively, explaining how it differs.
Any remaining exported libproc functions which are yet
to be included could be represented in a 3rd document.
For these new documents the following are are assumed:
1. Since we will not be able to document all items, we
shouldn't try to document any items. We should instead
rely on proc(5) or Documentation/filesystems/proc.txt.
2. Program development often involves referencing some
header file(s). So, make that an absolute requirement.
3. With the addition of item origins, represented with
this commit, and considering that 'types' were already
present, the header file might be all some users need.
4. And who knows, when a user of our libproc complains
about gaps in their documentation, it might prompt the
kernel folks to correct those long standing omissions.
To summarize, I suggest that we replace that libproc.3
document with a more general one explaining the basics
of accessing this new library and the common calls for
most of the major interfaces. We can then create a new
document (libproc-pids.3?), which explains differences
in using the <PIDS> application programming interface.
A final document (libproc-misc.3?) covers what's left.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-12-20 11:30:00 +05:30
|
|
|
PIDS_CGROUP, // str cgroup
|
library: refactored some header file items and origins
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46b3ff687bd29fad4708074a0e1cea14
. 01/2019, <stat> origins tweaked
commit 201e816b26ddaccc923ec40977c92037cdd0c34e
Signed-off-by: Jim Warner <james.warner@comcast.net>
2019-03-12 11:30:00 +05:30
|
|
|
PIDS_CGROUP_V, // strv cgroup, as *str[]
|
|
|
|
|
PIDS_CMD, // str stat: comm or status: Name
|
library: add item origin (as comments) to header files
A lack of documentation seems to be the major obstacle
to releasing this new library. So, in an effort to get
the ball rolling again, this patch adds the origins of
each item as a comment to six of the new header files.
However, before reviewing how such changes may benefit
that documentation objective, it seemed appropriate to
first reflect on newlib's background & current status.
___________________________________________ BACKGROUND
Discussions about and work on a new library began back
in July 2012 but quickly died. After a lull of 2 years
those discussions were resumed in August 2014 but soon
died also (and no code survived the gitorious demise).
With those early discussions, the recommended approach
was to encapsulate all of the libprocps data offerings
in individual functions. When it came to extensibility
it was suggested we should rely on symbols versioning.
Unfortunately that approach would have made for a huge
Application Programming Interface virtually impossible
to master or even document. And, runtime call overhead
would have been substantial for ps and especially top.
So, an alternative design was sought but there were no
new suggestions/contributions via freelists or gitlab.
Thus, in spite of a lack of library design experience,
the procps-ng team (Craig & Jim) set out to develop an
alternative API, more concise and with lower overhead.
Reference(s):
. 07/01/2012, begin library design discussion
https://www.freelists.org/post/procps/Old-library-calls
. 08/12/2014, revival of library design discussion
https://www.freelists.org/post/procps/libprocs-redesign
_____________________________________ DESIGN EVOLUTION
Our newlib branch first appeared on June 14, 2015. And
our current API actually represents the 4th generation
during the past 3 years of evolution. First, there was
a basic 'new', 'get' and 'unref' approach, using enums
to minimize the proliferation of 'get' function calls.
Then, in anticipation of other programs like ps, where
multiple fields times multiple processes would greatly
increase the number of 'get' function calls, a concept
of 'chains' was introduced. This became generation #2.
Such 'chains' proved unnecessarily complex so 'stacks'
replaced them. This was considered the 3rd generation,
but too many implementation details were still exposed
requiring those users to 'alloc', 'read', 'fill', etc.
Finally, a 4th generation emerged representing several
refinements to standardize and minimize those exported
functions, thus hiding all implementation details from
the users. Lastly, handling of 'errno' was normalized.
Reference(s):
. 06/14/2015, revival of new API discussion
https://www.freelists.org/post/procps/The-library-API-again
. 06/24/2015, birth of the newlib branch
https://www.freelists.org/post/procps/new-library
. 06/29/2015, 2nd generation introduced 'chains'
https://www.freelists.org/post/procps/new-library,8
. 07/22/2015, 3rd generation introduced 'stacks'
https://www.freelists.org/post/procps/newlib-stacks-vs-chains
. 06/18/2016, 4th generation refinements begin
https://www.freelists.org/post/procps/newlib-generation-35
. 11/10/2017, 4th generation standardized 'errno'
https://www.freelists.org/post/procps/some-more-master-newlib-stuff
_______________________________________ CURRENT DESIGN
Central to this new design is a simple 'result' struct
reflecting an item plus its value (thanks to a union).
As a user option, these item structures can be grouped
into 'stacks', yielding many results with just 1 call.
Such a 'stack' can be seen as a variable length record
whose content/order is determined solely by the users.
Within that 'result' structure, the union has standard
C language types so there is never a doubt how a value
should be used in a printf statement. Given that linux
requires a least a 32-bit platform the only difference
in capacity surrounds 'long' integers. And, where such
types might be used, the 32-bit maximums are adequate.
The items themselves are simply enumerators defined in
the respective header files. A user can name any items
of interest then the library magically provides result
structure(s). The approach was proven to be extensible
without breaking the ABI (in commit referenced below).
The 6 major APIs each provide for the following calls:
. 'new' ---------> always required as the first call .
. 'ref' -------------------------> strictly optional .
. 'unref' --------> optional, if ill-behaved program .
. 'get' --------------------> retrieve a single item .
. 'select' ----------------> retrieve multiple items .
And the 'get' and 'select' functions provide for delta
results representing the difference between successive
get/select calls (or a 'new' then 'get/select' call).
For the <diskstats>, <pids>, <slabinfo> & <stat> APIs,
where results are unpredictable, a 'reap' function can
return multiple result structures for multiple stacks.
The <pids> API differs from others in that those items
of interest must be provided at 'new' or 'reset' time,
a function unique to this API. And the <pids> 'select'
function requires PIDs or UIDs which are to be fetched
which then operates as a subset of 'reap'. Lastly, the
'get' function is an iterator for successive PIDs/TIDs
returning items previously identified via 'new/reset'.
To provide assistance to users during development, the
special header 'proc/xtra-procps-debug.h' is available
to check type usage against library expectations. That
check is activated by including this header explicitly
or via build using: ./configure '-DXTRA_PROCPS_DEBUG'.
Reference(s):
. 08/05/2016, type validation introduced
https://www.freelists.org/post/procps/newlib-types-validation
commit e3270d463de7eebd9f5ae20c85495e3cb5b69a9f
. 08/11/2016, extensibility while preserving ABI example
https://www.freelists.org/post/procps/new-meminfo-fields
commit 09e1886c9e731f8b8c89a55d11f72f53f030b2de
_________________________ INITIAL DOCUMENTATION EFFORT
The initial attempt, referenced below, dealt primarily
with the <pids> interface. Separate man pages for each
exported function were created. Plus there was another
document describing the items, among other miscellany.
Adopting such an approach encounters several problems:
1. In order to use these man pages, users are required
to already know how to use the library. Or alternately
one could randomly search each of them while trying to
ascertain which function call satisfies their need and
what exactly was the proper compliment/order required.
2. While we can explain what all of those <pids> items
represent, that certainly isn't true for all the APIs.
See the gaps in kernel documentation for <meminfo> and
complete lack of documentation with that <vmstat> API.
3. Our documentation effort should take pains to avoid
unnecessary implementation details. Here's an example:
. "The pointer to info will have memory"
. "allocated and a structure created."
Alternatively, the following conveys user requirements
while not offering any internal implementation detail:
. "You must provide the address of a NULL"
. "info structure pointer."
Reference(s):
. 01/04/2017, initial documentation offering
https://www.freelists.org/post/procps/Using-reap-and-get
commit 2598e9f2ce39c93ebf55f664454d3bea919ed4e0
___________________ RECOMMENDED DOCUMENTATION APPROACH
I recommend that the newlib documentation consist of 3
man pages only. The first would cover the 5 major APIs
and their common functions. The second would deal with
the <pids> API exclusively, explaining how it differs.
Any remaining exported libproc functions which are yet
to be included could be represented in a 3rd document.
For these new documents the following are are assumed:
1. Since we will not be able to document all items, we
shouldn't try to document any items. We should instead
rely on proc(5) or Documentation/filesystems/proc.txt.
2. Program development often involves referencing some
header file(s). So, make that an absolute requirement.
3. With the addition of item origins, represented with
this commit, and considering that 'types' were already
present, the header file might be all some users need.
4. And who knows, when a user of our libproc complains
about gaps in their documentation, it might prompt the
kernel folks to correct those long standing omissions.
To summarize, I suggest that we replace that libproc.3
document with a more general one explaining the basics
of accessing this new library and the common calls for
most of the major interfaces. We can then create a new
document (libproc-pids.3?), which explains differences
in using the <PIDS> application programming interface.
A final document (libproc-misc.3?) covers what's left.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-12-20 11:30:00 +05:30
|
|
|
PIDS_CMDLINE, // str cmdline
|
library: refactored some header file items and origins
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46b3ff687bd29fad4708074a0e1cea14
. 01/2019, <stat> origins tweaked
commit 201e816b26ddaccc923ec40977c92037cdd0c34e
Signed-off-by: Jim Warner <james.warner@comcast.net>
2019-03-12 11:30:00 +05:30
|
|
|
PIDS_CMDLINE_V, // strv cmdline, as *str[]
|
library: add item origin (as comments) to header files
A lack of documentation seems to be the major obstacle
to releasing this new library. So, in an effort to get
the ball rolling again, this patch adds the origins of
each item as a comment to six of the new header files.
However, before reviewing how such changes may benefit
that documentation objective, it seemed appropriate to
first reflect on newlib's background & current status.
___________________________________________ BACKGROUND
Discussions about and work on a new library began back
in July 2012 but quickly died. After a lull of 2 years
those discussions were resumed in August 2014 but soon
died also (and no code survived the gitorious demise).
With those early discussions, the recommended approach
was to encapsulate all of the libprocps data offerings
in individual functions. When it came to extensibility
it was suggested we should rely on symbols versioning.
Unfortunately that approach would have made for a huge
Application Programming Interface virtually impossible
to master or even document. And, runtime call overhead
would have been substantial for ps and especially top.
So, an alternative design was sought but there were no
new suggestions/contributions via freelists or gitlab.
Thus, in spite of a lack of library design experience,
the procps-ng team (Craig & Jim) set out to develop an
alternative API, more concise and with lower overhead.
Reference(s):
. 07/01/2012, begin library design discussion
https://www.freelists.org/post/procps/Old-library-calls
. 08/12/2014, revival of library design discussion
https://www.freelists.org/post/procps/libprocs-redesign
_____________________________________ DESIGN EVOLUTION
Our newlib branch first appeared on June 14, 2015. And
our current API actually represents the 4th generation
during the past 3 years of evolution. First, there was
a basic 'new', 'get' and 'unref' approach, using enums
to minimize the proliferation of 'get' function calls.
Then, in anticipation of other programs like ps, where
multiple fields times multiple processes would greatly
increase the number of 'get' function calls, a concept
of 'chains' was introduced. This became generation #2.
Such 'chains' proved unnecessarily complex so 'stacks'
replaced them. This was considered the 3rd generation,
but too many implementation details were still exposed
requiring those users to 'alloc', 'read', 'fill', etc.
Finally, a 4th generation emerged representing several
refinements to standardize and minimize those exported
functions, thus hiding all implementation details from
the users. Lastly, handling of 'errno' was normalized.
Reference(s):
. 06/14/2015, revival of new API discussion
https://www.freelists.org/post/procps/The-library-API-again
. 06/24/2015, birth of the newlib branch
https://www.freelists.org/post/procps/new-library
. 06/29/2015, 2nd generation introduced 'chains'
https://www.freelists.org/post/procps/new-library,8
. 07/22/2015, 3rd generation introduced 'stacks'
https://www.freelists.org/post/procps/newlib-stacks-vs-chains
. 06/18/2016, 4th generation refinements begin
https://www.freelists.org/post/procps/newlib-generation-35
. 11/10/2017, 4th generation standardized 'errno'
https://www.freelists.org/post/procps/some-more-master-newlib-stuff
_______________________________________ CURRENT DESIGN
Central to this new design is a simple 'result' struct
reflecting an item plus its value (thanks to a union).
As a user option, these item structures can be grouped
into 'stacks', yielding many results with just 1 call.
Such a 'stack' can be seen as a variable length record
whose content/order is determined solely by the users.
Within that 'result' structure, the union has standard
C language types so there is never a doubt how a value
should be used in a printf statement. Given that linux
requires a least a 32-bit platform the only difference
in capacity surrounds 'long' integers. And, where such
types might be used, the 32-bit maximums are adequate.
The items themselves are simply enumerators defined in
the respective header files. A user can name any items
of interest then the library magically provides result
structure(s). The approach was proven to be extensible
without breaking the ABI (in commit referenced below).
The 6 major APIs each provide for the following calls:
. 'new' ---------> always required as the first call .
. 'ref' -------------------------> strictly optional .
. 'unref' --------> optional, if ill-behaved program .
. 'get' --------------------> retrieve a single item .
. 'select' ----------------> retrieve multiple items .
And the 'get' and 'select' functions provide for delta
results representing the difference between successive
get/select calls (or a 'new' then 'get/select' call).
For the <diskstats>, <pids>, <slabinfo> & <stat> APIs,
where results are unpredictable, a 'reap' function can
return multiple result structures for multiple stacks.
The <pids> API differs from others in that those items
of interest must be provided at 'new' or 'reset' time,
a function unique to this API. And the <pids> 'select'
function requires PIDs or UIDs which are to be fetched
which then operates as a subset of 'reap'. Lastly, the
'get' function is an iterator for successive PIDs/TIDs
returning items previously identified via 'new/reset'.
To provide assistance to users during development, the
special header 'proc/xtra-procps-debug.h' is available
to check type usage against library expectations. That
check is activated by including this header explicitly
or via build using: ./configure '-DXTRA_PROCPS_DEBUG'.
Reference(s):
. 08/05/2016, type validation introduced
https://www.freelists.org/post/procps/newlib-types-validation
commit e3270d463de7eebd9f5ae20c85495e3cb5b69a9f
. 08/11/2016, extensibility while preserving ABI example
https://www.freelists.org/post/procps/new-meminfo-fields
commit 09e1886c9e731f8b8c89a55d11f72f53f030b2de
_________________________ INITIAL DOCUMENTATION EFFORT
The initial attempt, referenced below, dealt primarily
with the <pids> interface. Separate man pages for each
exported function were created. Plus there was another
document describing the items, among other miscellany.
Adopting such an approach encounters several problems:
1. In order to use these man pages, users are required
to already know how to use the library. Or alternately
one could randomly search each of them while trying to
ascertain which function call satisfies their need and
what exactly was the proper compliment/order required.
2. While we can explain what all of those <pids> items
represent, that certainly isn't true for all the APIs.
See the gaps in kernel documentation for <meminfo> and
complete lack of documentation with that <vmstat> API.
3. Our documentation effort should take pains to avoid
unnecessary implementation details. Here's an example:
. "The pointer to info will have memory"
. "allocated and a structure created."
Alternatively, the following conveys user requirements
while not offering any internal implementation detail:
. "You must provide the address of a NULL"
. "info structure pointer."
Reference(s):
. 01/04/2017, initial documentation offering
https://www.freelists.org/post/procps/Using-reap-and-get
commit 2598e9f2ce39c93ebf55f664454d3bea919ed4e0
___________________ RECOMMENDED DOCUMENTATION APPROACH
I recommend that the newlib documentation consist of 3
man pages only. The first would cover the 5 major APIs
and their common functions. The second would deal with
the <pids> API exclusively, explaining how it differs.
Any remaining exported libproc functions which are yet
to be included could be represented in a 3rd document.
For these new documents the following are are assumed:
1. Since we will not be able to document all items, we
shouldn't try to document any items. We should instead
rely on proc(5) or Documentation/filesystems/proc.txt.
2. Program development often involves referencing some
header file(s). So, make that an absolute requirement.
3. With the addition of item origins, represented with
this commit, and considering that 'types' were already
present, the header file might be all some users need.
4. And who knows, when a user of our libproc complains
about gaps in their documentation, it might prompt the
kernel folks to correct those long standing omissions.
To summarize, I suggest that we replace that libproc.3
document with a more general one explaining the basics
of accessing this new library and the common calls for
most of the major interfaces. We can then create a new
document (libproc-pids.3?), which explains differences
in using the <PIDS> application programming interface.
A final document (libproc-misc.3?) covers what's left.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-12-20 11:30:00 +05:30
|
|
|
PIDS_ENVIRON, // str environ
|
library: refactored some header file items and origins
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46b3ff687bd29fad4708074a0e1cea14
. 01/2019, <stat> origins tweaked
commit 201e816b26ddaccc923ec40977c92037cdd0c34e
Signed-off-by: Jim Warner <james.warner@comcast.net>
2019-03-12 11:30:00 +05:30
|
|
|
PIDS_ENVIRON_V, // strv environ, as *str[]
|
library: add item origin (as comments) to header files
A lack of documentation seems to be the major obstacle
to releasing this new library. So, in an effort to get
the ball rolling again, this patch adds the origins of
each item as a comment to six of the new header files.
However, before reviewing how such changes may benefit
that documentation objective, it seemed appropriate to
first reflect on newlib's background & current status.
___________________________________________ BACKGROUND
Discussions about and work on a new library began back
in July 2012 but quickly died. After a lull of 2 years
those discussions were resumed in August 2014 but soon
died also (and no code survived the gitorious demise).
With those early discussions, the recommended approach
was to encapsulate all of the libprocps data offerings
in individual functions. When it came to extensibility
it was suggested we should rely on symbols versioning.
Unfortunately that approach would have made for a huge
Application Programming Interface virtually impossible
to master or even document. And, runtime call overhead
would have been substantial for ps and especially top.
So, an alternative design was sought but there were no
new suggestions/contributions via freelists or gitlab.
Thus, in spite of a lack of library design experience,
the procps-ng team (Craig & Jim) set out to develop an
alternative API, more concise and with lower overhead.
Reference(s):
. 07/01/2012, begin library design discussion
https://www.freelists.org/post/procps/Old-library-calls
. 08/12/2014, revival of library design discussion
https://www.freelists.org/post/procps/libprocs-redesign
_____________________________________ DESIGN EVOLUTION
Our newlib branch first appeared on June 14, 2015. And
our current API actually represents the 4th generation
during the past 3 years of evolution. First, there was
a basic 'new', 'get' and 'unref' approach, using enums
to minimize the proliferation of 'get' function calls.
Then, in anticipation of other programs like ps, where
multiple fields times multiple processes would greatly
increase the number of 'get' function calls, a concept
of 'chains' was introduced. This became generation #2.
Such 'chains' proved unnecessarily complex so 'stacks'
replaced them. This was considered the 3rd generation,
but too many implementation details were still exposed
requiring those users to 'alloc', 'read', 'fill', etc.
Finally, a 4th generation emerged representing several
refinements to standardize and minimize those exported
functions, thus hiding all implementation details from
the users. Lastly, handling of 'errno' was normalized.
Reference(s):
. 06/14/2015, revival of new API discussion
https://www.freelists.org/post/procps/The-library-API-again
. 06/24/2015, birth of the newlib branch
https://www.freelists.org/post/procps/new-library
. 06/29/2015, 2nd generation introduced 'chains'
https://www.freelists.org/post/procps/new-library,8
. 07/22/2015, 3rd generation introduced 'stacks'
https://www.freelists.org/post/procps/newlib-stacks-vs-chains
. 06/18/2016, 4th generation refinements begin
https://www.freelists.org/post/procps/newlib-generation-35
. 11/10/2017, 4th generation standardized 'errno'
https://www.freelists.org/post/procps/some-more-master-newlib-stuff
_______________________________________ CURRENT DESIGN
Central to this new design is a simple 'result' struct
reflecting an item plus its value (thanks to a union).
As a user option, these item structures can be grouped
into 'stacks', yielding many results with just 1 call.
Such a 'stack' can be seen as a variable length record
whose content/order is determined solely by the users.
Within that 'result' structure, the union has standard
C language types so there is never a doubt how a value
should be used in a printf statement. Given that linux
requires a least a 32-bit platform the only difference
in capacity surrounds 'long' integers. And, where such
types might be used, the 32-bit maximums are adequate.
The items themselves are simply enumerators defined in
the respective header files. A user can name any items
of interest then the library magically provides result
structure(s). The approach was proven to be extensible
without breaking the ABI (in commit referenced below).
The 6 major APIs each provide for the following calls:
. 'new' ---------> always required as the first call .
. 'ref' -------------------------> strictly optional .
. 'unref' --------> optional, if ill-behaved program .
. 'get' --------------------> retrieve a single item .
. 'select' ----------------> retrieve multiple items .
And the 'get' and 'select' functions provide for delta
results representing the difference between successive
get/select calls (or a 'new' then 'get/select' call).
For the <diskstats>, <pids>, <slabinfo> & <stat> APIs,
where results are unpredictable, a 'reap' function can
return multiple result structures for multiple stacks.
The <pids> API differs from others in that those items
of interest must be provided at 'new' or 'reset' time,
a function unique to this API. And the <pids> 'select'
function requires PIDs or UIDs which are to be fetched
which then operates as a subset of 'reap'. Lastly, the
'get' function is an iterator for successive PIDs/TIDs
returning items previously identified via 'new/reset'.
To provide assistance to users during development, the
special header 'proc/xtra-procps-debug.h' is available
to check type usage against library expectations. That
check is activated by including this header explicitly
or via build using: ./configure '-DXTRA_PROCPS_DEBUG'.
Reference(s):
. 08/05/2016, type validation introduced
https://www.freelists.org/post/procps/newlib-types-validation
commit e3270d463de7eebd9f5ae20c85495e3cb5b69a9f
. 08/11/2016, extensibility while preserving ABI example
https://www.freelists.org/post/procps/new-meminfo-fields
commit 09e1886c9e731f8b8c89a55d11f72f53f030b2de
_________________________ INITIAL DOCUMENTATION EFFORT
The initial attempt, referenced below, dealt primarily
with the <pids> interface. Separate man pages for each
exported function were created. Plus there was another
document describing the items, among other miscellany.
Adopting such an approach encounters several problems:
1. In order to use these man pages, users are required
to already know how to use the library. Or alternately
one could randomly search each of them while trying to
ascertain which function call satisfies their need and
what exactly was the proper compliment/order required.
2. While we can explain what all of those <pids> items
represent, that certainly isn't true for all the APIs.
See the gaps in kernel documentation for <meminfo> and
complete lack of documentation with that <vmstat> API.
3. Our documentation effort should take pains to avoid
unnecessary implementation details. Here's an example:
. "The pointer to info will have memory"
. "allocated and a structure created."
Alternatively, the following conveys user requirements
while not offering any internal implementation detail:
. "You must provide the address of a NULL"
. "info structure pointer."
Reference(s):
. 01/04/2017, initial documentation offering
https://www.freelists.org/post/procps/Using-reap-and-get
commit 2598e9f2ce39c93ebf55f664454d3bea919ed4e0
___________________ RECOMMENDED DOCUMENTATION APPROACH
I recommend that the newlib documentation consist of 3
man pages only. The first would cover the 5 major APIs
and their common functions. The second would deal with
the <pids> API exclusively, explaining how it differs.
Any remaining exported libproc functions which are yet
to be included could be represented in a 3rd document.
For these new documents the following are are assumed:
1. Since we will not be able to document all items, we
shouldn't try to document any items. We should instead
rely on proc(5) or Documentation/filesystems/proc.txt.
2. Program development often involves referencing some
header file(s). So, make that an absolute requirement.
3. With the addition of item origins, represented with
this commit, and considering that 'types' were already
present, the header file might be all some users need.
4. And who knows, when a user of our libproc complains
about gaps in their documentation, it might prompt the
kernel folks to correct those long standing omissions.
To summarize, I suggest that we replace that libproc.3
document with a more general one explaining the basics
of accessing this new library and the common calls for
most of the major interfaces. We can then create a new
document (libproc-pids.3?), which explains differences
in using the <PIDS> application programming interface.
A final document (libproc-misc.3?) covers what's left.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-12-20 11:30:00 +05:30
|
|
|
PIDS_EXE, // str exe
|
library: refactored some header file items and origins
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46b3ff687bd29fad4708074a0e1cea14
. 01/2019, <stat> origins tweaked
commit 201e816b26ddaccc923ec40977c92037cdd0c34e
Signed-off-by: Jim Warner <james.warner@comcast.net>
2019-03-12 11:30:00 +05:30
|
|
|
PIDS_EXIT_SIGNAL, // s_int stat: exit_signal
|
|
|
|
|
PIDS_FLAGS, // ul_int stat: flags
|
|
|
|
|
PIDS_FLT_MAJ, // ul_int stat: majflt
|
|
|
|
|
PIDS_FLT_MAJ_C, // ul_int stat: majflt + cmajflt
|
|
|
|
|
PIDS_FLT_MAJ_DELTA, // s_int [ derived from FLT_MAJ ]
|
|
|
|
|
PIDS_FLT_MIN, // ul_int stat: minflt
|
|
|
|
|
PIDS_FLT_MIN_C, // ul_int stat: minflt + cminflt
|
|
|
|
|
PIDS_FLT_MIN_DELTA, // s_int [ derived from FLT_MIN ]
|
|
|
|
|
PIDS_ID_EGID, // u_int status: Uid
|
|
|
|
|
PIDS_ID_EGROUP, // str [ derived from EGID, see getgrgid(3) ]
|
|
|
|
|
PIDS_ID_EUID, // u_int status: Uid
|
|
|
|
|
PIDS_ID_EUSER, // str [ derived from EUID, see getpwuid(3) ]
|
|
|
|
|
PIDS_ID_FGID, // u_int status: Uid
|
|
|
|
|
PIDS_ID_FGROUP, // str [ derived from FGID, see getgrgid(3) ]
|
|
|
|
|
PIDS_ID_FUID, // u_int status: Uid
|
|
|
|
|
PIDS_ID_FUSER, // str [ derived from FUID, see getpwuid(3) ]
|
library: add item origin (as comments) to header files
A lack of documentation seems to be the major obstacle
to releasing this new library. So, in an effort to get
the ball rolling again, this patch adds the origins of
each item as a comment to six of the new header files.
However, before reviewing how such changes may benefit
that documentation objective, it seemed appropriate to
first reflect on newlib's background & current status.
___________________________________________ BACKGROUND
Discussions about and work on a new library began back
in July 2012 but quickly died. After a lull of 2 years
those discussions were resumed in August 2014 but soon
died also (and no code survived the gitorious demise).
With those early discussions, the recommended approach
was to encapsulate all of the libprocps data offerings
in individual functions. When it came to extensibility
it was suggested we should rely on symbols versioning.
Unfortunately that approach would have made for a huge
Application Programming Interface virtually impossible
to master or even document. And, runtime call overhead
would have been substantial for ps and especially top.
So, an alternative design was sought but there were no
new suggestions/contributions via freelists or gitlab.
Thus, in spite of a lack of library design experience,
the procps-ng team (Craig & Jim) set out to develop an
alternative API, more concise and with lower overhead.
Reference(s):
. 07/01/2012, begin library design discussion
https://www.freelists.org/post/procps/Old-library-calls
. 08/12/2014, revival of library design discussion
https://www.freelists.org/post/procps/libprocs-redesign
_____________________________________ DESIGN EVOLUTION
Our newlib branch first appeared on June 14, 2015. And
our current API actually represents the 4th generation
during the past 3 years of evolution. First, there was
a basic 'new', 'get' and 'unref' approach, using enums
to minimize the proliferation of 'get' function calls.
Then, in anticipation of other programs like ps, where
multiple fields times multiple processes would greatly
increase the number of 'get' function calls, a concept
of 'chains' was introduced. This became generation #2.
Such 'chains' proved unnecessarily complex so 'stacks'
replaced them. This was considered the 3rd generation,
but too many implementation details were still exposed
requiring those users to 'alloc', 'read', 'fill', etc.
Finally, a 4th generation emerged representing several
refinements to standardize and minimize those exported
functions, thus hiding all implementation details from
the users. Lastly, handling of 'errno' was normalized.
Reference(s):
. 06/14/2015, revival of new API discussion
https://www.freelists.org/post/procps/The-library-API-again
. 06/24/2015, birth of the newlib branch
https://www.freelists.org/post/procps/new-library
. 06/29/2015, 2nd generation introduced 'chains'
https://www.freelists.org/post/procps/new-library,8
. 07/22/2015, 3rd generation introduced 'stacks'
https://www.freelists.org/post/procps/newlib-stacks-vs-chains
. 06/18/2016, 4th generation refinements begin
https://www.freelists.org/post/procps/newlib-generation-35
. 11/10/2017, 4th generation standardized 'errno'
https://www.freelists.org/post/procps/some-more-master-newlib-stuff
_______________________________________ CURRENT DESIGN
Central to this new design is a simple 'result' struct
reflecting an item plus its value (thanks to a union).
As a user option, these item structures can be grouped
into 'stacks', yielding many results with just 1 call.
Such a 'stack' can be seen as a variable length record
whose content/order is determined solely by the users.
Within that 'result' structure, the union has standard
C language types so there is never a doubt how a value
should be used in a printf statement. Given that linux
requires a least a 32-bit platform the only difference
in capacity surrounds 'long' integers. And, where such
types might be used, the 32-bit maximums are adequate.
The items themselves are simply enumerators defined in
the respective header files. A user can name any items
of interest then the library magically provides result
structure(s). The approach was proven to be extensible
without breaking the ABI (in commit referenced below).
The 6 major APIs each provide for the following calls:
. 'new' ---------> always required as the first call .
. 'ref' -------------------------> strictly optional .
. 'unref' --------> optional, if ill-behaved program .
. 'get' --------------------> retrieve a single item .
. 'select' ----------------> retrieve multiple items .
And the 'get' and 'select' functions provide for delta
results representing the difference between successive
get/select calls (or a 'new' then 'get/select' call).
For the <diskstats>, <pids>, <slabinfo> & <stat> APIs,
where results are unpredictable, a 'reap' function can
return multiple result structures for multiple stacks.
The <pids> API differs from others in that those items
of interest must be provided at 'new' or 'reset' time,
a function unique to this API. And the <pids> 'select'
function requires PIDs or UIDs which are to be fetched
which then operates as a subset of 'reap'. Lastly, the
'get' function is an iterator for successive PIDs/TIDs
returning items previously identified via 'new/reset'.
To provide assistance to users during development, the
special header 'proc/xtra-procps-debug.h' is available
to check type usage against library expectations. That
check is activated by including this header explicitly
or via build using: ./configure '-DXTRA_PROCPS_DEBUG'.
Reference(s):
. 08/05/2016, type validation introduced
https://www.freelists.org/post/procps/newlib-types-validation
commit e3270d463de7eebd9f5ae20c85495e3cb5b69a9f
. 08/11/2016, extensibility while preserving ABI example
https://www.freelists.org/post/procps/new-meminfo-fields
commit 09e1886c9e731f8b8c89a55d11f72f53f030b2de
_________________________ INITIAL DOCUMENTATION EFFORT
The initial attempt, referenced below, dealt primarily
with the <pids> interface. Separate man pages for each
exported function were created. Plus there was another
document describing the items, among other miscellany.
Adopting such an approach encounters several problems:
1. In order to use these man pages, users are required
to already know how to use the library. Or alternately
one could randomly search each of them while trying to
ascertain which function call satisfies their need and
what exactly was the proper compliment/order required.
2. While we can explain what all of those <pids> items
represent, that certainly isn't true for all the APIs.
See the gaps in kernel documentation for <meminfo> and
complete lack of documentation with that <vmstat> API.
3. Our documentation effort should take pains to avoid
unnecessary implementation details. Here's an example:
. "The pointer to info will have memory"
. "allocated and a structure created."
Alternatively, the following conveys user requirements
while not offering any internal implementation detail:
. "You must provide the address of a NULL"
. "info structure pointer."
Reference(s):
. 01/04/2017, initial documentation offering
https://www.freelists.org/post/procps/Using-reap-and-get
commit 2598e9f2ce39c93ebf55f664454d3bea919ed4e0
___________________ RECOMMENDED DOCUMENTATION APPROACH
I recommend that the newlib documentation consist of 3
man pages only. The first would cover the 5 major APIs
and their common functions. The second would deal with
the <pids> API exclusively, explaining how it differs.
Any remaining exported libproc functions which are yet
to be included could be represented in a 3rd document.
For these new documents the following are are assumed:
1. Since we will not be able to document all items, we
shouldn't try to document any items. We should instead
rely on proc(5) or Documentation/filesystems/proc.txt.
2. Program development often involves referencing some
header file(s). So, make that an absolute requirement.
3. With the addition of item origins, represented with
this commit, and considering that 'types' were already
present, the header file might be all some users need.
4. And who knows, when a user of our libproc complains
about gaps in their documentation, it might prompt the
kernel folks to correct those long standing omissions.
To summarize, I suggest that we replace that libproc.3
document with a more general one explaining the basics
of accessing this new library and the common calls for
most of the major interfaces. We can then create a new
document (libproc-pids.3?), which explains differences
in using the <PIDS> application programming interface.
A final document (libproc-misc.3?) covers what's left.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-12-20 11:30:00 +05:30
|
|
|
PIDS_ID_LOGIN, // s_int loginuid
|
library: refactored some header file items and origins
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46b3ff687bd29fad4708074a0e1cea14
. 01/2019, <stat> origins tweaked
commit 201e816b26ddaccc923ec40977c92037cdd0c34e
Signed-off-by: Jim Warner <james.warner@comcast.net>
2019-03-12 11:30:00 +05:30
|
|
|
PIDS_ID_PGRP, // s_int stat: pgrp
|
|
|
|
|
PIDS_ID_PID, // s_int from /proc/<pid>
|
|
|
|
|
PIDS_ID_PPID, // s_int stat: ppid or status: PPid
|
|
|
|
|
PIDS_ID_RGID, // u_int status: Gid
|
|
|
|
|
PIDS_ID_RGROUP, // str [ derived from RGID, see getgrgid(3) ]
|
|
|
|
|
PIDS_ID_RUID, // u_int status: Gid
|
|
|
|
|
PIDS_ID_RUSER, // str [ derived from RUID, see getpwuid(3) ]
|
|
|
|
|
PIDS_ID_SESSION, // s_int stat: session
|
|
|
|
|
PIDS_ID_SGID, // u_int status: Gid
|
|
|
|
|
PIDS_ID_SGROUP, // str [ derived from SGID, see getgrgid(3) ]
|
|
|
|
|
PIDS_ID_SUID, // u_int status: Gid
|
|
|
|
|
PIDS_ID_SUSER, // str [ derived from SUID, see getpwuid(3) ]
|
|
|
|
|
PIDS_ID_TGID, // s_int status: Tgid
|
|
|
|
|
PIDS_ID_TID, // s_int from /proc/<pid>/task/<tid>
|
|
|
|
|
PIDS_ID_TPGID, // s_int stat: tpgid
|
2020-05-20 10:30:00 +05:30
|
|
|
PIDS_LXCNAME, // str [ derived from CGROUP 'lxc.payload' ]
|
library: refactored some header file items and origins
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46b3ff687bd29fad4708074a0e1cea14
. 01/2019, <stat> origins tweaked
commit 201e816b26ddaccc923ec40977c92037cdd0c34e
Signed-off-by: Jim Warner <james.warner@comcast.net>
2019-03-12 11:30:00 +05:30
|
|
|
PIDS_MEM_CODE, // ul_int [ derived from MEM_CODE_PGS, as KiB ]
|
|
|
|
|
PIDS_MEM_CODE_PGS, // ul_int statm: text
|
|
|
|
|
PIDS_MEM_DATA, // ul_int [ derived from MEM_DATA_PGS, as KiB ]
|
|
|
|
|
PIDS_MEM_DATA_PGS, // ul_int statm: data
|
|
|
|
|
PIDS_MEM_RES, // ul_int [ derived from MEM_RES_PGS, as KiB ]
|
|
|
|
|
PIDS_MEM_RES_PGS, // ul_int statm: resident
|
|
|
|
|
PIDS_MEM_SHR, // ul_int [ derived from MEM_SHR_PGS, as KiB ]
|
|
|
|
|
PIDS_MEM_SHR_PGS, // ul_int statm: shared
|
|
|
|
|
PIDS_MEM_VIRT, // ul_int [ derived from MEM_VIRT_PGS, as KiB ]
|
|
|
|
|
PIDS_MEM_VIRT_PGS, // ul_int statm: size
|
|
|
|
|
PIDS_NICE, // s_int stat: nice
|
|
|
|
|
PIDS_NLWP, // s_int stat: num_threads or status: Threads
|
library: add item origin (as comments) to header files
A lack of documentation seems to be the major obstacle
to releasing this new library. So, in an effort to get
the ball rolling again, this patch adds the origins of
each item as a comment to six of the new header files.
However, before reviewing how such changes may benefit
that documentation objective, it seemed appropriate to
first reflect on newlib's background & current status.
___________________________________________ BACKGROUND
Discussions about and work on a new library began back
in July 2012 but quickly died. After a lull of 2 years
those discussions were resumed in August 2014 but soon
died also (and no code survived the gitorious demise).
With those early discussions, the recommended approach
was to encapsulate all of the libprocps data offerings
in individual functions. When it came to extensibility
it was suggested we should rely on symbols versioning.
Unfortunately that approach would have made for a huge
Application Programming Interface virtually impossible
to master or even document. And, runtime call overhead
would have been substantial for ps and especially top.
So, an alternative design was sought but there were no
new suggestions/contributions via freelists or gitlab.
Thus, in spite of a lack of library design experience,
the procps-ng team (Craig & Jim) set out to develop an
alternative API, more concise and with lower overhead.
Reference(s):
. 07/01/2012, begin library design discussion
https://www.freelists.org/post/procps/Old-library-calls
. 08/12/2014, revival of library design discussion
https://www.freelists.org/post/procps/libprocs-redesign
_____________________________________ DESIGN EVOLUTION
Our newlib branch first appeared on June 14, 2015. And
our current API actually represents the 4th generation
during the past 3 years of evolution. First, there was
a basic 'new', 'get' and 'unref' approach, using enums
to minimize the proliferation of 'get' function calls.
Then, in anticipation of other programs like ps, where
multiple fields times multiple processes would greatly
increase the number of 'get' function calls, a concept
of 'chains' was introduced. This became generation #2.
Such 'chains' proved unnecessarily complex so 'stacks'
replaced them. This was considered the 3rd generation,
but too many implementation details were still exposed
requiring those users to 'alloc', 'read', 'fill', etc.
Finally, a 4th generation emerged representing several
refinements to standardize and minimize those exported
functions, thus hiding all implementation details from
the users. Lastly, handling of 'errno' was normalized.
Reference(s):
. 06/14/2015, revival of new API discussion
https://www.freelists.org/post/procps/The-library-API-again
. 06/24/2015, birth of the newlib branch
https://www.freelists.org/post/procps/new-library
. 06/29/2015, 2nd generation introduced 'chains'
https://www.freelists.org/post/procps/new-library,8
. 07/22/2015, 3rd generation introduced 'stacks'
https://www.freelists.org/post/procps/newlib-stacks-vs-chains
. 06/18/2016, 4th generation refinements begin
https://www.freelists.org/post/procps/newlib-generation-35
. 11/10/2017, 4th generation standardized 'errno'
https://www.freelists.org/post/procps/some-more-master-newlib-stuff
_______________________________________ CURRENT DESIGN
Central to this new design is a simple 'result' struct
reflecting an item plus its value (thanks to a union).
As a user option, these item structures can be grouped
into 'stacks', yielding many results with just 1 call.
Such a 'stack' can be seen as a variable length record
whose content/order is determined solely by the users.
Within that 'result' structure, the union has standard
C language types so there is never a doubt how a value
should be used in a printf statement. Given that linux
requires a least a 32-bit platform the only difference
in capacity surrounds 'long' integers. And, where such
types might be used, the 32-bit maximums are adequate.
The items themselves are simply enumerators defined in
the respective header files. A user can name any items
of interest then the library magically provides result
structure(s). The approach was proven to be extensible
without breaking the ABI (in commit referenced below).
The 6 major APIs each provide for the following calls:
. 'new' ---------> always required as the first call .
. 'ref' -------------------------> strictly optional .
. 'unref' --------> optional, if ill-behaved program .
. 'get' --------------------> retrieve a single item .
. 'select' ----------------> retrieve multiple items .
And the 'get' and 'select' functions provide for delta
results representing the difference between successive
get/select calls (or a 'new' then 'get/select' call).
For the <diskstats>, <pids>, <slabinfo> & <stat> APIs,
where results are unpredictable, a 'reap' function can
return multiple result structures for multiple stacks.
The <pids> API differs from others in that those items
of interest must be provided at 'new' or 'reset' time,
a function unique to this API. And the <pids> 'select'
function requires PIDs or UIDs which are to be fetched
which then operates as a subset of 'reap'. Lastly, the
'get' function is an iterator for successive PIDs/TIDs
returning items previously identified via 'new/reset'.
To provide assistance to users during development, the
special header 'proc/xtra-procps-debug.h' is available
to check type usage against library expectations. That
check is activated by including this header explicitly
or via build using: ./configure '-DXTRA_PROCPS_DEBUG'.
Reference(s):
. 08/05/2016, type validation introduced
https://www.freelists.org/post/procps/newlib-types-validation
commit e3270d463de7eebd9f5ae20c85495e3cb5b69a9f
. 08/11/2016, extensibility while preserving ABI example
https://www.freelists.org/post/procps/new-meminfo-fields
commit 09e1886c9e731f8b8c89a55d11f72f53f030b2de
_________________________ INITIAL DOCUMENTATION EFFORT
The initial attempt, referenced below, dealt primarily
with the <pids> interface. Separate man pages for each
exported function were created. Plus there was another
document describing the items, among other miscellany.
Adopting such an approach encounters several problems:
1. In order to use these man pages, users are required
to already know how to use the library. Or alternately
one could randomly search each of them while trying to
ascertain which function call satisfies their need and
what exactly was the proper compliment/order required.
2. While we can explain what all of those <pids> items
represent, that certainly isn't true for all the APIs.
See the gaps in kernel documentation for <meminfo> and
complete lack of documentation with that <vmstat> API.
3. Our documentation effort should take pains to avoid
unnecessary implementation details. Here's an example:
. "The pointer to info will have memory"
. "allocated and a structure created."
Alternatively, the following conveys user requirements
while not offering any internal implementation detail:
. "You must provide the address of a NULL"
. "info structure pointer."
Reference(s):
. 01/04/2017, initial documentation offering
https://www.freelists.org/post/procps/Using-reap-and-get
commit 2598e9f2ce39c93ebf55f664454d3bea919ed4e0
___________________ RECOMMENDED DOCUMENTATION APPROACH
I recommend that the newlib documentation consist of 3
man pages only. The first would cover the 5 major APIs
and their common functions. The second would deal with
the <pids> API exclusively, explaining how it differs.
Any remaining exported libproc functions which are yet
to be included could be represented in a 3rd document.
For these new documents the following are are assumed:
1. Since we will not be able to document all items, we
shouldn't try to document any items. We should instead
rely on proc(5) or Documentation/filesystems/proc.txt.
2. Program development often involves referencing some
header file(s). So, make that an absolute requirement.
3. With the addition of item origins, represented with
this commit, and considering that 'types' were already
present, the header file might be all some users need.
4. And who knows, when a user of our libproc complains
about gaps in their documentation, it might prompt the
kernel folks to correct those long standing omissions.
To summarize, I suggest that we replace that libproc.3
document with a more general one explaining the basics
of accessing this new library and the common calls for
most of the major interfaces. We can then create a new
document (libproc-pids.3?), which explains differences
in using the <PIDS> application programming interface.
A final document (libproc-misc.3?) covers what's left.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-12-20 11:30:00 +05:30
|
|
|
PIDS_NS_IPC, // ul_int ns/
|
library: refactored some header file items and origins
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46b3ff687bd29fad4708074a0e1cea14
. 01/2019, <stat> origins tweaked
commit 201e816b26ddaccc923ec40977c92037cdd0c34e
Signed-off-by: Jim Warner <james.warner@comcast.net>
2019-03-12 11:30:00 +05:30
|
|
|
PIDS_NS_MNT, // ul_int "
|
|
|
|
|
PIDS_NS_NET, // ul_int "
|
|
|
|
|
PIDS_NS_PID, // ul_int "
|
|
|
|
|
PIDS_NS_USER, // ul_int "
|
|
|
|
|
PIDS_NS_UTS, // ul_int "
|
library: add item origin (as comments) to header files
A lack of documentation seems to be the major obstacle
to releasing this new library. So, in an effort to get
the ball rolling again, this patch adds the origins of
each item as a comment to six of the new header files.
However, before reviewing how such changes may benefit
that documentation objective, it seemed appropriate to
first reflect on newlib's background & current status.
___________________________________________ BACKGROUND
Discussions about and work on a new library began back
in July 2012 but quickly died. After a lull of 2 years
those discussions were resumed in August 2014 but soon
died also (and no code survived the gitorious demise).
With those early discussions, the recommended approach
was to encapsulate all of the libprocps data offerings
in individual functions. When it came to extensibility
it was suggested we should rely on symbols versioning.
Unfortunately that approach would have made for a huge
Application Programming Interface virtually impossible
to master or even document. And, runtime call overhead
would have been substantial for ps and especially top.
So, an alternative design was sought but there were no
new suggestions/contributions via freelists or gitlab.
Thus, in spite of a lack of library design experience,
the procps-ng team (Craig & Jim) set out to develop an
alternative API, more concise and with lower overhead.
Reference(s):
. 07/01/2012, begin library design discussion
https://www.freelists.org/post/procps/Old-library-calls
. 08/12/2014, revival of library design discussion
https://www.freelists.org/post/procps/libprocs-redesign
_____________________________________ DESIGN EVOLUTION
Our newlib branch first appeared on June 14, 2015. And
our current API actually represents the 4th generation
during the past 3 years of evolution. First, there was
a basic 'new', 'get' and 'unref' approach, using enums
to minimize the proliferation of 'get' function calls.
Then, in anticipation of other programs like ps, where
multiple fields times multiple processes would greatly
increase the number of 'get' function calls, a concept
of 'chains' was introduced. This became generation #2.
Such 'chains' proved unnecessarily complex so 'stacks'
replaced them. This was considered the 3rd generation,
but too many implementation details were still exposed
requiring those users to 'alloc', 'read', 'fill', etc.
Finally, a 4th generation emerged representing several
refinements to standardize and minimize those exported
functions, thus hiding all implementation details from
the users. Lastly, handling of 'errno' was normalized.
Reference(s):
. 06/14/2015, revival of new API discussion
https://www.freelists.org/post/procps/The-library-API-again
. 06/24/2015, birth of the newlib branch
https://www.freelists.org/post/procps/new-library
. 06/29/2015, 2nd generation introduced 'chains'
https://www.freelists.org/post/procps/new-library,8
. 07/22/2015, 3rd generation introduced 'stacks'
https://www.freelists.org/post/procps/newlib-stacks-vs-chains
. 06/18/2016, 4th generation refinements begin
https://www.freelists.org/post/procps/newlib-generation-35
. 11/10/2017, 4th generation standardized 'errno'
https://www.freelists.org/post/procps/some-more-master-newlib-stuff
_______________________________________ CURRENT DESIGN
Central to this new design is a simple 'result' struct
reflecting an item plus its value (thanks to a union).
As a user option, these item structures can be grouped
into 'stacks', yielding many results with just 1 call.
Such a 'stack' can be seen as a variable length record
whose content/order is determined solely by the users.
Within that 'result' structure, the union has standard
C language types so there is never a doubt how a value
should be used in a printf statement. Given that linux
requires a least a 32-bit platform the only difference
in capacity surrounds 'long' integers. And, where such
types might be used, the 32-bit maximums are adequate.
The items themselves are simply enumerators defined in
the respective header files. A user can name any items
of interest then the library magically provides result
structure(s). The approach was proven to be extensible
without breaking the ABI (in commit referenced below).
The 6 major APIs each provide for the following calls:
. 'new' ---------> always required as the first call .
. 'ref' -------------------------> strictly optional .
. 'unref' --------> optional, if ill-behaved program .
. 'get' --------------------> retrieve a single item .
. 'select' ----------------> retrieve multiple items .
And the 'get' and 'select' functions provide for delta
results representing the difference between successive
get/select calls (or a 'new' then 'get/select' call).
For the <diskstats>, <pids>, <slabinfo> & <stat> APIs,
where results are unpredictable, a 'reap' function can
return multiple result structures for multiple stacks.
The <pids> API differs from others in that those items
of interest must be provided at 'new' or 'reset' time,
a function unique to this API. And the <pids> 'select'
function requires PIDs or UIDs which are to be fetched
which then operates as a subset of 'reap'. Lastly, the
'get' function is an iterator for successive PIDs/TIDs
returning items previously identified via 'new/reset'.
To provide assistance to users during development, the
special header 'proc/xtra-procps-debug.h' is available
to check type usage against library expectations. That
check is activated by including this header explicitly
or via build using: ./configure '-DXTRA_PROCPS_DEBUG'.
Reference(s):
. 08/05/2016, type validation introduced
https://www.freelists.org/post/procps/newlib-types-validation
commit e3270d463de7eebd9f5ae20c85495e3cb5b69a9f
. 08/11/2016, extensibility while preserving ABI example
https://www.freelists.org/post/procps/new-meminfo-fields
commit 09e1886c9e731f8b8c89a55d11f72f53f030b2de
_________________________ INITIAL DOCUMENTATION EFFORT
The initial attempt, referenced below, dealt primarily
with the <pids> interface. Separate man pages for each
exported function were created. Plus there was another
document describing the items, among other miscellany.
Adopting such an approach encounters several problems:
1. In order to use these man pages, users are required
to already know how to use the library. Or alternately
one could randomly search each of them while trying to
ascertain which function call satisfies their need and
what exactly was the proper compliment/order required.
2. While we can explain what all of those <pids> items
represent, that certainly isn't true for all the APIs.
See the gaps in kernel documentation for <meminfo> and
complete lack of documentation with that <vmstat> API.
3. Our documentation effort should take pains to avoid
unnecessary implementation details. Here's an example:
. "The pointer to info will have memory"
. "allocated and a structure created."
Alternatively, the following conveys user requirements
while not offering any internal implementation detail:
. "You must provide the address of a NULL"
. "info structure pointer."
Reference(s):
. 01/04/2017, initial documentation offering
https://www.freelists.org/post/procps/Using-reap-and-get
commit 2598e9f2ce39c93ebf55f664454d3bea919ed4e0
___________________ RECOMMENDED DOCUMENTATION APPROACH
I recommend that the newlib documentation consist of 3
man pages only. The first would cover the 5 major APIs
and their common functions. The second would deal with
the <pids> API exclusively, explaining how it differs.
Any remaining exported libproc functions which are yet
to be included could be represented in a 3rd document.
For these new documents the following are are assumed:
1. Since we will not be able to document all items, we
shouldn't try to document any items. We should instead
rely on proc(5) or Documentation/filesystems/proc.txt.
2. Program development often involves referencing some
header file(s). So, make that an absolute requirement.
3. With the addition of item origins, represented with
this commit, and considering that 'types' were already
present, the header file might be all some users need.
4. And who knows, when a user of our libproc complains
about gaps in their documentation, it might prompt the
kernel folks to correct those long standing omissions.
To summarize, I suggest that we replace that libproc.3
document with a more general one explaining the basics
of accessing this new library and the common calls for
most of the major interfaces. We can then create a new
document (libproc-pids.3?), which explains differences
in using the <PIDS> application programming interface.
A final document (libproc-misc.3?) covers what's left.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-12-20 11:30:00 +05:30
|
|
|
PIDS_OOM_ADJ, // s_int oom_score_adj
|
|
|
|
|
PIDS_OOM_SCORE, // s_int oom_score
|
library: refactored some header file items and origins
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46b3ff687bd29fad4708074a0e1cea14
. 01/2019, <stat> origins tweaked
commit 201e816b26ddaccc923ec40977c92037cdd0c34e
Signed-off-by: Jim Warner <james.warner@comcast.net>
2019-03-12 11:30:00 +05:30
|
|
|
PIDS_PRIORITY, // s_int stat: priority
|
|
|
|
|
PIDS_PRIORITY_RT, // s_int stat: rt_priority
|
|
|
|
|
PIDS_PROCESSOR, // u_int stat: processor
|
|
|
|
|
PIDS_PROCESSOR_NODE, // s_int [ derived from PROCESSOR, see numa(3) ]
|
|
|
|
|
PIDS_RSS, // ul_int stat: rss
|
|
|
|
|
PIDS_RSS_RLIM, // ul_int stat: rsslim
|
|
|
|
|
PIDS_SCHED_CLASS, // s_int stat: policy
|
|
|
|
|
PIDS_SD_MACH, // str [ derived from PID/TID, see sd-login(3) ]
|
library: add item origin (as comments) to header files
A lack of documentation seems to be the major obstacle
to releasing this new library. So, in an effort to get
the ball rolling again, this patch adds the origins of
each item as a comment to six of the new header files.
However, before reviewing how such changes may benefit
that documentation objective, it seemed appropriate to
first reflect on newlib's background & current status.
___________________________________________ BACKGROUND
Discussions about and work on a new library began back
in July 2012 but quickly died. After a lull of 2 years
those discussions were resumed in August 2014 but soon
died also (and no code survived the gitorious demise).
With those early discussions, the recommended approach
was to encapsulate all of the libprocps data offerings
in individual functions. When it came to extensibility
it was suggested we should rely on symbols versioning.
Unfortunately that approach would have made for a huge
Application Programming Interface virtually impossible
to master or even document. And, runtime call overhead
would have been substantial for ps and especially top.
So, an alternative design was sought but there were no
new suggestions/contributions via freelists or gitlab.
Thus, in spite of a lack of library design experience,
the procps-ng team (Craig & Jim) set out to develop an
alternative API, more concise and with lower overhead.
Reference(s):
. 07/01/2012, begin library design discussion
https://www.freelists.org/post/procps/Old-library-calls
. 08/12/2014, revival of library design discussion
https://www.freelists.org/post/procps/libprocs-redesign
_____________________________________ DESIGN EVOLUTION
Our newlib branch first appeared on June 14, 2015. And
our current API actually represents the 4th generation
during the past 3 years of evolution. First, there was
a basic 'new', 'get' and 'unref' approach, using enums
to minimize the proliferation of 'get' function calls.
Then, in anticipation of other programs like ps, where
multiple fields times multiple processes would greatly
increase the number of 'get' function calls, a concept
of 'chains' was introduced. This became generation #2.
Such 'chains' proved unnecessarily complex so 'stacks'
replaced them. This was considered the 3rd generation,
but too many implementation details were still exposed
requiring those users to 'alloc', 'read', 'fill', etc.
Finally, a 4th generation emerged representing several
refinements to standardize and minimize those exported
functions, thus hiding all implementation details from
the users. Lastly, handling of 'errno' was normalized.
Reference(s):
. 06/14/2015, revival of new API discussion
https://www.freelists.org/post/procps/The-library-API-again
. 06/24/2015, birth of the newlib branch
https://www.freelists.org/post/procps/new-library
. 06/29/2015, 2nd generation introduced 'chains'
https://www.freelists.org/post/procps/new-library,8
. 07/22/2015, 3rd generation introduced 'stacks'
https://www.freelists.org/post/procps/newlib-stacks-vs-chains
. 06/18/2016, 4th generation refinements begin
https://www.freelists.org/post/procps/newlib-generation-35
. 11/10/2017, 4th generation standardized 'errno'
https://www.freelists.org/post/procps/some-more-master-newlib-stuff
_______________________________________ CURRENT DESIGN
Central to this new design is a simple 'result' struct
reflecting an item plus its value (thanks to a union).
As a user option, these item structures can be grouped
into 'stacks', yielding many results with just 1 call.
Such a 'stack' can be seen as a variable length record
whose content/order is determined solely by the users.
Within that 'result' structure, the union has standard
C language types so there is never a doubt how a value
should be used in a printf statement. Given that linux
requires a least a 32-bit platform the only difference
in capacity surrounds 'long' integers. And, where such
types might be used, the 32-bit maximums are adequate.
The items themselves are simply enumerators defined in
the respective header files. A user can name any items
of interest then the library magically provides result
structure(s). The approach was proven to be extensible
without breaking the ABI (in commit referenced below).
The 6 major APIs each provide for the following calls:
. 'new' ---------> always required as the first call .
. 'ref' -------------------------> strictly optional .
. 'unref' --------> optional, if ill-behaved program .
. 'get' --------------------> retrieve a single item .
. 'select' ----------------> retrieve multiple items .
And the 'get' and 'select' functions provide for delta
results representing the difference between successive
get/select calls (or a 'new' then 'get/select' call).
For the <diskstats>, <pids>, <slabinfo> & <stat> APIs,
where results are unpredictable, a 'reap' function can
return multiple result structures for multiple stacks.
The <pids> API differs from others in that those items
of interest must be provided at 'new' or 'reset' time,
a function unique to this API. And the <pids> 'select'
function requires PIDs or UIDs which are to be fetched
which then operates as a subset of 'reap'. Lastly, the
'get' function is an iterator for successive PIDs/TIDs
returning items previously identified via 'new/reset'.
To provide assistance to users during development, the
special header 'proc/xtra-procps-debug.h' is available
to check type usage against library expectations. That
check is activated by including this header explicitly
or via build using: ./configure '-DXTRA_PROCPS_DEBUG'.
Reference(s):
. 08/05/2016, type validation introduced
https://www.freelists.org/post/procps/newlib-types-validation
commit e3270d463de7eebd9f5ae20c85495e3cb5b69a9f
. 08/11/2016, extensibility while preserving ABI example
https://www.freelists.org/post/procps/new-meminfo-fields
commit 09e1886c9e731f8b8c89a55d11f72f53f030b2de
_________________________ INITIAL DOCUMENTATION EFFORT
The initial attempt, referenced below, dealt primarily
with the <pids> interface. Separate man pages for each
exported function were created. Plus there was another
document describing the items, among other miscellany.
Adopting such an approach encounters several problems:
1. In order to use these man pages, users are required
to already know how to use the library. Or alternately
one could randomly search each of them while trying to
ascertain which function call satisfies their need and
what exactly was the proper compliment/order required.
2. While we can explain what all of those <pids> items
represent, that certainly isn't true for all the APIs.
See the gaps in kernel documentation for <meminfo> and
complete lack of documentation with that <vmstat> API.
3. Our documentation effort should take pains to avoid
unnecessary implementation details. Here's an example:
. "The pointer to info will have memory"
. "allocated and a structure created."
Alternatively, the following conveys user requirements
while not offering any internal implementation detail:
. "You must provide the address of a NULL"
. "info structure pointer."
Reference(s):
. 01/04/2017, initial documentation offering
https://www.freelists.org/post/procps/Using-reap-and-get
commit 2598e9f2ce39c93ebf55f664454d3bea919ed4e0
___________________ RECOMMENDED DOCUMENTATION APPROACH
I recommend that the newlib documentation consist of 3
man pages only. The first would cover the 5 major APIs
and their common functions. The second would deal with
the <pids> API exclusively, explaining how it differs.
Any remaining exported libproc functions which are yet
to be included could be represented in a 3rd document.
For these new documents the following are are assumed:
1. Since we will not be able to document all items, we
shouldn't try to document any items. We should instead
rely on proc(5) or Documentation/filesystems/proc.txt.
2. Program development often involves referencing some
header file(s). So, make that an absolute requirement.
3. With the addition of item origins, represented with
this commit, and considering that 'types' were already
present, the header file might be all some users need.
4. And who knows, when a user of our libproc complains
about gaps in their documentation, it might prompt the
kernel folks to correct those long standing omissions.
To summarize, I suggest that we replace that libproc.3
document with a more general one explaining the basics
of accessing this new library and the common calls for
most of the major interfaces. We can then create a new
document (libproc-pids.3?), which explains differences
in using the <PIDS> application programming interface.
A final document (libproc-misc.3?) covers what's left.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-12-20 11:30:00 +05:30
|
|
|
PIDS_SD_OUID, // str "
|
|
|
|
|
PIDS_SD_SEAT, // str "
|
|
|
|
|
PIDS_SD_SESS, // str "
|
|
|
|
|
PIDS_SD_SLICE, // str "
|
|
|
|
|
PIDS_SD_UNIT, // str "
|
|
|
|
|
PIDS_SD_UUNIT, // str "
|
library: refactored some header file items and origins
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46b3ff687bd29fad4708074a0e1cea14
. 01/2019, <stat> origins tweaked
commit 201e816b26ddaccc923ec40977c92037cdd0c34e
Signed-off-by: Jim Warner <james.warner@comcast.net>
2019-03-12 11:30:00 +05:30
|
|
|
PIDS_SIGBLOCKED, // str status: SigBlk
|
|
|
|
|
PIDS_SIGCATCH, // str status: SigCgt
|
|
|
|
|
PIDS_SIGIGNORE, // str status: SigIgn
|
|
|
|
|
PIDS_SIGNALS, // str status: ShdPnd
|
|
|
|
|
PIDS_SIGPENDING, // str status: SigPnd
|
|
|
|
|
PIDS_STATE, // s_ch stat: state or status: State
|
|
|
|
|
PIDS_SUPGIDS, // str status: Groups
|
|
|
|
|
PIDS_SUPGROUPS, // str [ derived from SUPGIDS, see getgrgid(3) ]
|
|
|
|
|
PIDS_TICS_ALL, // ull_int stat: stime + utime
|
|
|
|
|
PIDS_TICS_ALL_C, // ull_int stat: stime + utime + cstime + cutime
|
|
|
|
|
PIDS_TICS_ALL_DELTA, // s_int [ derived from TICS_ALL ]
|
|
|
|
|
PIDS_TICS_BLKIO, // ull_int stat: delayacct_blkio_ticks
|
|
|
|
|
PIDS_TICS_GUEST, // ull_int stat: guest_time
|
|
|
|
|
PIDS_TICS_GUEST_C, // ull_int stat: guest_time + cguest_time
|
|
|
|
|
PIDS_TICS_SYSTEM, // ull_int stat: stime
|
|
|
|
|
PIDS_TICS_SYSTEM_C, // ull_int stat: stime + cstime
|
|
|
|
|
PIDS_TICS_USER, // ull_int stat: utime
|
|
|
|
|
PIDS_TICS_USER_C, // ull_int stat: utime + cutime
|
|
|
|
|
PIDS_TIME_ALL, // ull_int [ derived from (utime + stime) / hertz ]
|
2019-04-25 10:30:00 +05:30
|
|
|
PIDS_TIME_ELAPSED, // ull_int [ derived from /proc/uptime - (starttime / hertz) ]
|
library: refactored some header file items and origins
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46b3ff687bd29fad4708074a0e1cea14
. 01/2019, <stat> origins tweaked
commit 201e816b26ddaccc923ec40977c92037cdd0c34e
Signed-off-by: Jim Warner <james.warner@comcast.net>
2019-03-12 11:30:00 +05:30
|
|
|
PIDS_TIME_START, // ull_int stat: starttime
|
|
|
|
|
PIDS_TTY, // s_int stat: tty_nr
|
|
|
|
|
PIDS_TTY_NAME, // str [ derived from TTY ]
|
|
|
|
|
PIDS_TTY_NUMBER, // str [ derived from TTY as str ]
|
|
|
|
|
PIDS_VM_DATA, // ul_int status: VmData
|
|
|
|
|
PIDS_VM_EXE, // ul_int status: VmExe
|
|
|
|
|
PIDS_VM_LIB, // ul_int status: VmLib
|
|
|
|
|
PIDS_VM_RSS, // ul_int status: VmRSS
|
|
|
|
|
PIDS_VM_RSS_ANON, // ul_int status: RssAnon
|
|
|
|
|
PIDS_VM_RSS_FILE, // ul_int status: RssFile
|
|
|
|
|
PIDS_VM_RSS_LOCKED, // ul_int status: VmLck
|
|
|
|
|
PIDS_VM_RSS_SHARED, // ul_int status: RssShmem
|
|
|
|
|
PIDS_VM_SIZE, // ul_int status: VmSize
|
|
|
|
|
PIDS_VM_STACK, // ul_int status: VmStk
|
|
|
|
|
PIDS_VM_SWAP, // ul_int status: VmSwap
|
|
|
|
|
PIDS_VM_USED, // ul_int status: VmRSS + VmSwap
|
|
|
|
|
PIDS_VSIZE_PGS, // ul_int stat: vsize
|
library: add item origin (as comments) to header files
A lack of documentation seems to be the major obstacle
to releasing this new library. So, in an effort to get
the ball rolling again, this patch adds the origins of
each item as a comment to six of the new header files.
However, before reviewing how such changes may benefit
that documentation objective, it seemed appropriate to
first reflect on newlib's background & current status.
___________________________________________ BACKGROUND
Discussions about and work on a new library began back
in July 2012 but quickly died. After a lull of 2 years
those discussions were resumed in August 2014 but soon
died also (and no code survived the gitorious demise).
With those early discussions, the recommended approach
was to encapsulate all of the libprocps data offerings
in individual functions. When it came to extensibility
it was suggested we should rely on symbols versioning.
Unfortunately that approach would have made for a huge
Application Programming Interface virtually impossible
to master or even document. And, runtime call overhead
would have been substantial for ps and especially top.
So, an alternative design was sought but there were no
new suggestions/contributions via freelists or gitlab.
Thus, in spite of a lack of library design experience,
the procps-ng team (Craig & Jim) set out to develop an
alternative API, more concise and with lower overhead.
Reference(s):
. 07/01/2012, begin library design discussion
https://www.freelists.org/post/procps/Old-library-calls
. 08/12/2014, revival of library design discussion
https://www.freelists.org/post/procps/libprocs-redesign
_____________________________________ DESIGN EVOLUTION
Our newlib branch first appeared on June 14, 2015. And
our current API actually represents the 4th generation
during the past 3 years of evolution. First, there was
a basic 'new', 'get' and 'unref' approach, using enums
to minimize the proliferation of 'get' function calls.
Then, in anticipation of other programs like ps, where
multiple fields times multiple processes would greatly
increase the number of 'get' function calls, a concept
of 'chains' was introduced. This became generation #2.
Such 'chains' proved unnecessarily complex so 'stacks'
replaced them. This was considered the 3rd generation,
but too many implementation details were still exposed
requiring those users to 'alloc', 'read', 'fill', etc.
Finally, a 4th generation emerged representing several
refinements to standardize and minimize those exported
functions, thus hiding all implementation details from
the users. Lastly, handling of 'errno' was normalized.
Reference(s):
. 06/14/2015, revival of new API discussion
https://www.freelists.org/post/procps/The-library-API-again
. 06/24/2015, birth of the newlib branch
https://www.freelists.org/post/procps/new-library
. 06/29/2015, 2nd generation introduced 'chains'
https://www.freelists.org/post/procps/new-library,8
. 07/22/2015, 3rd generation introduced 'stacks'
https://www.freelists.org/post/procps/newlib-stacks-vs-chains
. 06/18/2016, 4th generation refinements begin
https://www.freelists.org/post/procps/newlib-generation-35
. 11/10/2017, 4th generation standardized 'errno'
https://www.freelists.org/post/procps/some-more-master-newlib-stuff
_______________________________________ CURRENT DESIGN
Central to this new design is a simple 'result' struct
reflecting an item plus its value (thanks to a union).
As a user option, these item structures can be grouped
into 'stacks', yielding many results with just 1 call.
Such a 'stack' can be seen as a variable length record
whose content/order is determined solely by the users.
Within that 'result' structure, the union has standard
C language types so there is never a doubt how a value
should be used in a printf statement. Given that linux
requires a least a 32-bit platform the only difference
in capacity surrounds 'long' integers. And, where such
types might be used, the 32-bit maximums are adequate.
The items themselves are simply enumerators defined in
the respective header files. A user can name any items
of interest then the library magically provides result
structure(s). The approach was proven to be extensible
without breaking the ABI (in commit referenced below).
The 6 major APIs each provide for the following calls:
. 'new' ---------> always required as the first call .
. 'ref' -------------------------> strictly optional .
. 'unref' --------> optional, if ill-behaved program .
. 'get' --------------------> retrieve a single item .
. 'select' ----------------> retrieve multiple items .
And the 'get' and 'select' functions provide for delta
results representing the difference between successive
get/select calls (or a 'new' then 'get/select' call).
For the <diskstats>, <pids>, <slabinfo> & <stat> APIs,
where results are unpredictable, a 'reap' function can
return multiple result structures for multiple stacks.
The <pids> API differs from others in that those items
of interest must be provided at 'new' or 'reset' time,
a function unique to this API. And the <pids> 'select'
function requires PIDs or UIDs which are to be fetched
which then operates as a subset of 'reap'. Lastly, the
'get' function is an iterator for successive PIDs/TIDs
returning items previously identified via 'new/reset'.
To provide assistance to users during development, the
special header 'proc/xtra-procps-debug.h' is available
to check type usage against library expectations. That
check is activated by including this header explicitly
or via build using: ./configure '-DXTRA_PROCPS_DEBUG'.
Reference(s):
. 08/05/2016, type validation introduced
https://www.freelists.org/post/procps/newlib-types-validation
commit e3270d463de7eebd9f5ae20c85495e3cb5b69a9f
. 08/11/2016, extensibility while preserving ABI example
https://www.freelists.org/post/procps/new-meminfo-fields
commit 09e1886c9e731f8b8c89a55d11f72f53f030b2de
_________________________ INITIAL DOCUMENTATION EFFORT
The initial attempt, referenced below, dealt primarily
with the <pids> interface. Separate man pages for each
exported function were created. Plus there was another
document describing the items, among other miscellany.
Adopting such an approach encounters several problems:
1. In order to use these man pages, users are required
to already know how to use the library. Or alternately
one could randomly search each of them while trying to
ascertain which function call satisfies their need and
what exactly was the proper compliment/order required.
2. While we can explain what all of those <pids> items
represent, that certainly isn't true for all the APIs.
See the gaps in kernel documentation for <meminfo> and
complete lack of documentation with that <vmstat> API.
3. Our documentation effort should take pains to avoid
unnecessary implementation details. Here's an example:
. "The pointer to info will have memory"
. "allocated and a structure created."
Alternatively, the following conveys user requirements
while not offering any internal implementation detail:
. "You must provide the address of a NULL"
. "info structure pointer."
Reference(s):
. 01/04/2017, initial documentation offering
https://www.freelists.org/post/procps/Using-reap-and-get
commit 2598e9f2ce39c93ebf55f664454d3bea919ed4e0
___________________ RECOMMENDED DOCUMENTATION APPROACH
I recommend that the newlib documentation consist of 3
man pages only. The first would cover the 5 major APIs
and their common functions. The second would deal with
the <pids> API exclusively, explaining how it differs.
Any remaining exported libproc functions which are yet
to be included could be represented in a 3rd document.
For these new documents the following are are assumed:
1. Since we will not be able to document all items, we
shouldn't try to document any items. We should instead
rely on proc(5) or Documentation/filesystems/proc.txt.
2. Program development often involves referencing some
header file(s). So, make that an absolute requirement.
3. With the addition of item origins, represented with
this commit, and considering that 'types' were already
present, the header file might be all some users need.
4. And who knows, when a user of our libproc complains
about gaps in their documentation, it might prompt the
kernel folks to correct those long standing omissions.
To summarize, I suggest that we replace that libproc.3
document with a more general one explaining the basics
of accessing this new library and the common calls for
most of the major interfaces. We can then create a new
document (libproc-pids.3?), which explains differences
in using the <PIDS> application programming interface.
A final document (libproc-misc.3?) covers what's left.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2018-12-20 11:30:00 +05:30
|
|
|
PIDS_WCHAN_NAME // str wchan
|
2015-08-19 10:30:00 +05:30
|
|
|
};
|
|
|
|
|
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
enum pids_fetch_type {
|
library: removed all the 'PROCPS_' enumerator prefixes
Many of our item enumerator identifiers are very long,
especially in that <VMSTAT> module. Additionally, they
all contain the exact same universal 'PROCPS_' prefix.
The origins for this are likely found in the desire to
avoid name clashes with other potential include files.
But with procps-ng newlib, we've probably gone way too
far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more
protection against clash than 'PIDS_TICS_SYSTEM' does?
I don't think so. Besides, no matter how big that name
becomes, one can never guarantee they'll never be some
clash. And, conversely, extremely short names will not
always create conflict. Of course, in either case when
some clash occurs, one can always #undef that problem.
Thus, this commit will eliminate that 'PROCPS_' prefix
making all of those enum identifiers a little shorter.
And, we'll still be well above some ridiculously short
(criminally short) names found in some common headers:
- - - - - - - - - - <term.h>
- 'tab', 'TTY', etc
- - - - - - - - - - - - - - - - <search.h>
- 'ENTER', ENTRY', 'FIND', etc
------------------------------------------------------
Finally, with this as a last of the wholesale changes,
we will have established the naming conventions below:
. only functions will begin with that 'procps_' prefix
. exposed structures begin with the module/header name
. item enumerators begin like structs, but capitalized
. other enumerators work exactly like item enumerators
. macros and constants begin just like the enumerators
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
|
|
|
PIDS_FETCH_TASKS_ONLY,
|
|
|
|
|
PIDS_FETCH_THREADS_TOO
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
};
|
|
|
|
|
|
2016-04-18 10:30:00 +05:30
|
|
|
enum pids_select_type {
|
library: removed all the 'PROCPS_' enumerator prefixes
Many of our item enumerator identifiers are very long,
especially in that <VMSTAT> module. Additionally, they
all contain the exact same universal 'PROCPS_' prefix.
The origins for this are likely found in the desire to
avoid name clashes with other potential include files.
But with procps-ng newlib, we've probably gone way too
far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more
protection against clash than 'PIDS_TICS_SYSTEM' does?
I don't think so. Besides, no matter how big that name
becomes, one can never guarantee they'll never be some
clash. And, conversely, extremely short names will not
always create conflict. Of course, in either case when
some clash occurs, one can always #undef that problem.
Thus, this commit will eliminate that 'PROCPS_' prefix
making all of those enum identifiers a little shorter.
And, we'll still be well above some ridiculously short
(criminally short) names found in some common headers:
- - - - - - - - - - <term.h>
- 'tab', 'TTY', etc
- - - - - - - - - - - - - - - - <search.h>
- 'ENTER', ENTRY', 'FIND', etc
------------------------------------------------------
Finally, with this as a last of the wholesale changes,
we will have established the naming conventions below:
. only functions will begin with that 'procps_' prefix
. exposed structures begin with the module/header name
. item enumerators begin like structs, but capitalized
. other enumerators work exactly like item enumerators
. macros and constants begin just like the enumerators
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
|
|
|
PIDS_SELECT_PID = 0x1000,
|
|
|
|
|
PIDS_SELECT_UID = 0x4000
|
2015-08-19 10:30:00 +05:30
|
|
|
};
|
|
|
|
|
|
|
|
|
|
enum pids_sort_order {
|
library: removed all the 'PROCPS_' enumerator prefixes
Many of our item enumerator identifiers are very long,
especially in that <VMSTAT> module. Additionally, they
all contain the exact same universal 'PROCPS_' prefix.
The origins for this are likely found in the desire to
avoid name clashes with other potential include files.
But with procps-ng newlib, we've probably gone way too
far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more
protection against clash than 'PIDS_TICS_SYSTEM' does?
I don't think so. Besides, no matter how big that name
becomes, one can never guarantee they'll never be some
clash. And, conversely, extremely short names will not
always create conflict. Of course, in either case when
some clash occurs, one can always #undef that problem.
Thus, this commit will eliminate that 'PROCPS_' prefix
making all of those enum identifiers a little shorter.
And, we'll still be well above some ridiculously short
(criminally short) names found in some common headers:
- - - - - - - - - - <term.h>
- 'tab', 'TTY', etc
- - - - - - - - - - - - - - - - <search.h>
- 'ENTER', ENTRY', 'FIND', etc
------------------------------------------------------
Finally, with this as a last of the wholesale changes,
we will have established the naming conventions below:
. only functions will begin with that 'procps_' prefix
. exposed structures begin with the module/header name
. item enumerators begin like structs, but capitalized
. other enumerators work exactly like item enumerators
. macros and constants begin just like the enumerators
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-21 10:30:00 +05:30
|
|
|
PIDS_SORT_ASCEND = +1,
|
|
|
|
|
PIDS_SORT_DESCEND = -1
|
2015-08-19 10:30:00 +05:30
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
struct pids_result {
|
|
|
|
|
enum pids_item item;
|
|
|
|
|
union {
|
2016-06-14 10:30:00 +05:30
|
|
|
signed char s_ch;
|
|
|
|
|
signed int s_int;
|
|
|
|
|
unsigned int u_int;
|
|
|
|
|
unsigned long ul_int;
|
|
|
|
|
unsigned long long ull_int;
|
|
|
|
|
char *str;
|
|
|
|
|
char **strv;
|
2015-08-19 10:30:00 +05:30
|
|
|
} result;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct pids_stack {
|
|
|
|
|
struct pids_result *head;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct pids_counts {
|
|
|
|
|
int total;
|
2018-01-13 11:30:00 +05:30
|
|
|
int running, sleeping, stopped, zombied, other;
|
2015-08-19 10:30:00 +05:30
|
|
|
};
|
|
|
|
|
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
struct pids_fetch {
|
2016-06-23 10:30:00 +05:30
|
|
|
struct pids_counts *counts;
|
2015-08-20 10:30:00 +05:30
|
|
|
struct pids_stack **stacks;
|
2015-08-19 10:30:00 +05:30
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
2016-08-05 10:30:00 +05:30
|
|
|
#define PIDS_VAL( relative_enum, type, stack, info ) \
|
2016-06-18 10:30:00 +05:30
|
|
|
stack -> head [ relative_enum ] . result . type
|
2015-08-26 10:30:00 +05:30
|
|
|
|
|
|
|
|
|
2016-07-21 10:30:00 +05:30
|
|
|
struct pids_info;
|
2016-06-14 10:30:00 +05:30
|
|
|
|
2016-07-21 10:30:00 +05:30
|
|
|
int procps_pids_new (struct pids_info **info, enum pids_item *items, int numitems);
|
|
|
|
|
int procps_pids_ref (struct pids_info *info);
|
|
|
|
|
int procps_pids_unref (struct pids_info **info);
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
|
2015-09-11 10:30:00 +05:30
|
|
|
struct pids_stack *fatal_proc_unmounted (
|
2016-07-21 10:30:00 +05:30
|
|
|
struct pids_info *info,
|
2015-09-11 10:30:00 +05:30
|
|
|
int return_self);
|
|
|
|
|
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
struct pids_stack *procps_pids_get (
|
2016-07-21 10:30:00 +05:30
|
|
|
struct pids_info *info,
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
enum pids_fetch_type which);
|
2015-08-26 10:30:00 +05:30
|
|
|
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
struct pids_fetch *procps_pids_reap (
|
2016-07-21 10:30:00 +05:30
|
|
|
struct pids_info *info,
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
enum pids_fetch_type which);
|
2015-08-19 10:30:00 +05:30
|
|
|
|
|
|
|
|
int procps_pids_reset (
|
2016-07-21 10:30:00 +05:30
|
|
|
struct pids_info *info,
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
enum pids_item *newitems,
|
|
|
|
|
int newnumitems);
|
2015-08-19 10:30:00 +05:30
|
|
|
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
struct pids_fetch *procps_pids_select (
|
2016-07-21 10:30:00 +05:30
|
|
|
struct pids_info *info,
|
2015-10-01 10:30:00 +05:30
|
|
|
unsigned *these,
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
int numthese,
|
2016-04-18 10:30:00 +05:30
|
|
|
enum pids_select_type which);
|
2015-10-01 10:30:00 +05:30
|
|
|
|
2015-10-11 10:30:00 +05:30
|
|
|
struct pids_stack **procps_pids_sort (
|
2016-07-21 10:30:00 +05:30
|
|
|
struct pids_info *info,
|
2015-08-20 10:30:00 +05:30
|
|
|
struct pids_stack *stacks[],
|
2015-08-19 10:30:00 +05:30
|
|
|
int numstacked,
|
library: standardize portions of interface, <PIDS> api
This represents a rather major interface redesign. The
following highlights most of the changes/enhancements.
. The 'read' interface (employed by pgrep & pidof) saw
the biggest change. The 'open', 'next' and 'shut' guys
all went bye-bye, replaced by a single 'get' function.
. The items specified at 'new' time no longer serve as
the maximum. In fact, items & numitems are now treated
as optional, should callers prefer to wait until later
when the 'reset' function would then become mandatory.
. Even at 'reset' time, the stacks are not tied to any
sort of maximum. They will grow dynamically as needed.
. The order of some parameters was changed to parallel
that found in our other APIs. Specifically, when items
& numitems are needed they're specified in that order.
. A user will no longer be prevented from concurrently
employing any accessor functions. In other words, that
'get' (old 'read') won't preclude 'reap' and 'select'.
. A duplicate enumerator was found dealing with locked
resident pages. So, the name VM_LOCK was eliminated in
favor of VM_RSS_LOCKED, which is way more descriptive.
. The struct address returned to callers following any
reap() or select() is now more sharable as pids_fetch.
. Some input parameter names were changed to make them
more descriptive of the intended purpose/requirements.
------------------------------------------------------
Internally, there were numerous implementation changes
made that did not directly impact any potential users.
. That #define FPRINT_STACKS was eliminated along with
the associated supporting function and its invocation.
. Addresses returned following 'reap' or 'select' will
now be NULL delimited, so one has the option of stacks
access via the total count or this new NULL fencepost.
. Input params were simplified and generalized in both
oldproc_open() & close() to enable more than 1 PROCTAB
to be open simultaneously, which was required for get.
. The PROCPS_PIDS_logical_end enum was relocated after
the Item_table making the need to keep it synchronized
more apparent (if the table expands it's right there).
. The 'Public function' section of the source file was
subdivided into 1) the three basic required functions;
and 2) functions that can sometimes vary between APIs.
Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-05-14 10:30:00 +05:30
|
|
|
enum pids_item sortitem,
|
2015-08-19 10:30:00 +05:30
|
|
|
enum pids_sort_order order);
|
|
|
|
|
|
2018-09-01 10:30:00 +05:30
|
|
|
|
|
|
|
|
#ifdef XTRA_PROCPS_DEBUG
|
2020-07-25 10:30:00 +05:30
|
|
|
# include "xtra-procps-debug.h"
|
2018-09-01 10:30:00 +05:30
|
|
|
#endif
|
2018-04-06 10:30:00 +05:30
|
|
|
#ifdef __cplusplus
|
|
|
|
|
}
|
|
|
|
|
#endif
|
2016-09-28 20:40:10 +05:30
|
|
|
#endif
|