emo
/
procps
1
0
Fork 0
Code Issues Pull Requests Packages Releases Activity
procps/Makefile.am

409 lines
9.2 KiB
Makefile
Raw Normal View History

build-sys: tweak make & activate some overlooked tests This commit is just preparing for adding an Itemtables verification test by reorganizing stuff and activating a few previously inactive (overlooked?) test programs. Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-08-15 20:40:10 +05:30
Added Cygwin build support strverscmp is included to satisfy a dependency in Cygwin. Excluded utmp and prctl functions that are not supported currently.
2016-03-11 04:34:27 +05:30
CYGWINFLAGS =
if CYGWIN
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
CYGWINFLAGS += -lintl
usrbin_exec_PROGRAMS =
Added Cygwin build support strverscmp is included to satisfy a dependency in Cygwin. Excluded utmp and prctl functions that are not supported currently.
2016-03-11 04:34:27 +05:30
endif
build-sys: correct all Makefile.am files for LOCALEDIR, etc Some of the latest changes to Makefile.am files are missing. This patch restores the LOCALEDIR variable, among others, and dispenses with the include directives in the ps/ and top/ subdirectories since they're no longer needed.
2012-01-02 20:38:58 +05:30
AM_CPPFLAGS = \
-include $(top_builddir)/config.h \
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
-I$(top_srcdir)/local \
build-sys: Need to add libary includes The default path didn't add the library includes. A standard build would work, but a make distcheck would not.
2022-08-29 14:46:49 +05:30
-I$(top_srcdir)/library/include \
build-sys: suppress '-Wunused-result' with AM_CPPFLAGS Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-07-14 10:30:00 +05:30
-Wno-unused-result \
build-sys: Enable optional hardening flags With the configure option --enable-harden-flags the CFLAGS and LDFLAGS are manipulated to provide some hardening protection to the binaries. psmisc uses these flags on by default with no troubles, however it doesn't have a library in it either. References: https://wiki.debian.org/Hardening
2016-04-25 12:37:22 +05:30
-DLOCALEDIR=\"$(localedir)\" \
@HARDEN_CFLAGS@
AM_LDFLAGS = @HARDEN_LDFLAGS@
build-sys: take autotools in use again This will revert change at Oct 2002 when autotools support was removed. Unlike before the package developers are expected to use ./autogen.sh to generate ./configure script, and run make after that. The build system is also able to create, with make dist, a tar ball release which compiles correctly, and has files which seemed to be important to have. The patch removes few unnecessary files, but no everything. Files procps.lsm and procps.spec in git repository are useless as is, but I left them lying around for someone who can make more justified call about removal of them. Last, but not least package version number is set 3.3.0 to distinct this procps from the sourceforge's upstream procps. Please notice that libproc relese is kept as 3.2.8. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-06-04 19:56:58 +05:30
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
PACKAGE_VERSION = @PACKAGE_VERSION@
build-sys: take autotools in use again This will revert change at Oct 2002 when autotools support was removed. Unlike before the package developers are expected to use ./autogen.sh to generate ./configure script, and run make after that. The build system is also able to create, with make dist, a tar ball release which compiles correctly, and has files which seemed to be important to have. The patch removes few unnecessary files, but no everything. Files procps.lsm and procps.spec in git repository are useless as is, but I left them lying around for someone who can make more justified call about removal of them. Last, but not least package version number is set 3.3.0 to distinct this procps from the sourceforge's upstream procps. Please notice that libproc relese is kept as 3.2.8. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-06-04 19:56:58 +05:30
ACLOCAL_AMFLAGS = -I m4
build-sys: add NLS support Add GNU gettext internationalization and localization support. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-10-09 00:44:21 +05:30
SUBDIRS = \
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
local \
build-sys: add NLS support Add GNU gettext internationalization and localization support. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-10-09 00:44:21 +05:30
po \
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
testsuite
build-sys: take autotools in use again This will revert change at Oct 2002 when autotools support was removed. Unlike before the package developers are expected to use ./autogen.sh to generate ./configure script, and run make after that. The build system is also able to create, with make dist, a tar ball release which compiles correctly, and has files which seemed to be important to have. The patch removes few unnecessary files, but no everything. Files procps.lsm and procps.spec in git repository are useless as is, but I left them lying around for someone who can make more justified call about removal of them. Last, but not least package version number is set 3.3.0 to distinct this procps from the sourceforge's upstream procps. Please notice that libproc relese is kept as 3.2.8. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-06-04 19:56:58 +05:30
build-sys: Relocate library to library/ All the dependent programs needed to have their includes moved too Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:32:44 +05:30
AM_CFLAGS = -Ilibrary/include
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
LDADD = ./library/libproc2.la $(CYGWINFLAGS)
build-sys: take autotools in use again This will revert change at Oct 2002 when autotools support was removed. Unlike before the package developers are expected to use ./autogen.sh to generate ./configure script, and run make after that. The build system is also able to create, with make dist, a tar ball release which compiles correctly, and has files which seemed to be important to have. The patch removes few unnecessary files, but no everything. Files procps.lsm and procps.spec in git repository are useless as is, but I left them lying around for someone who can make more justified call about removal of them. Last, but not least package version number is set 3.3.0 to distinct this procps from the sourceforge's upstream procps. Please notice that libproc relese is kept as 3.2.8. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-06-04 19:56:58 +05:30
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if CYGWIN
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
AM_LDFLAGS += ./library/libproc2.la $(CYGWINFLAGS)
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
endif
transform =
if !CYGWIN
transform += s/pscommand/ps/; $(program_transform_name)
sbin_PROGRAMS = \
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src/sysctl
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
else
transform += s/pscommand/procps/; $(program_transform_name)
endif
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if !CYGWIN
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
bin_PROGRAMS = \
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src/ps/pscommand \
src/free \
src/pgrep \
src/pkill \
src/pmap \
src/pwdx \
src/tload \
src/vmstat
pidwait: Rename from pwait pwait is already in at least Debian in a different package References: https://bugs.debian.org/982391
2021-02-15 15:40:06 +05:30
if BUILD_PIDWAIT
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
bin_PROGRAMS += src/pidwait
pgrep: add pwait
2020-02-24 08:32:59 +05:30
endif
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
else
usrbin_exec_PROGRAMS += \
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src/ps/pscommand \
src/free \
src/pgrep \
src/pkill \
src/pmap \
src/vmstat
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
endif
build-sys: install binaries in bindir (get rid of usrbin_execdir) The "usrbin_execdir" hack meant to install some binaries in /bin and others in /usr/bin. However: - It is very inflexible: not much control on the final directory name and it is not possible to get rid of the usr/bin suffix without patching the build system. - It is hard to use: it requires configure to receive --exec_prefix=/ and other settings do not make much sense. It is not very obvious that that setting needs to be passed and it takes a while to figure it out. - It produces garbage with the default setup: the default prefix of /usr/local ends up installing the binaries under /usr/local/usr/bin which does not make any sense. Furthermore, the requirement to split binaries in /bin and /usr/bin is not that strong since some distributions adopted the /usr merge and so would agree to just deploy all binaries to /usr/bin directly. Distributions that would still like to split /bin from /usr/bin should actually move binaries such as `ps` and `kill` to /bin after the install of procps-ng is complete. After all, they are the ones responsible for determining what are the binaries that need to be in the root partition and that list depends on their early boot init scripts, so it is possible that the list must be augmented with other binaries from this package. Therefore, I propose here to get rid of that hack and simply install all the binaries to bindir instead, which solves the problems described above and simplifies the build and install of procps-ng. Tested that it builds and both `make check` and `make distcheck` work. Tested that `make install` works and produces the expected tree, the only difference being the absence of the bogus /usr/local/usr/bin directory and now all binaries are merged into /usr/local/bin as expected. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 11:57:13 +05:30
lib_LTLIBRARIES = \
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library/libproc2.la
build-sys: install binaries in bindir (get rid of usrbin_execdir) The "usrbin_execdir" hack meant to install some binaries in /bin and others in /usr/bin. However: - It is very inflexible: not much control on the final directory name and it is not possible to get rid of the usr/bin suffix without patching the build system. - It is hard to use: it requires configure to receive --exec_prefix=/ and other settings do not make much sense. It is not very obvious that that setting needs to be passed and it takes a while to figure it out. - It produces garbage with the default setup: the default prefix of /usr/local ends up installing the binaries under /usr/local/usr/bin which does not make any sense. Furthermore, the requirement to split binaries in /bin and /usr/bin is not that strong since some distributions adopted the /usr merge and so would agree to just deploy all binaries to /usr/bin directly. Distributions that would still like to split /bin from /usr/bin should actually move binaries such as `ps` and `kill` to /bin after the install of procps-ng is complete. After all, they are the ones responsible for determining what are the binaries that need to be in the root partition and that list depends on their early boot init scripts, so it is possible that the list must be augmented with other binaries from this package. Therefore, I propose here to get rid of that hack and simply install all the binaries to bindir instead, which solves the problems described above and simplifies the build and install of procps-ng. Tested that it builds and both `make check` and `make distcheck` work. Tested that `make install` works and produces the expected tree, the only difference being the absence of the bogus /usr/local/usr/bin directory and now all binaries are merged into /usr/local/bin as expected. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 11:57:13 +05:30
build-sys: take autotools in use again This will revert change at Oct 2002 when autotools support was removed. Unlike before the package developers are expected to use ./autogen.sh to generate ./configure script, and run make after that. The build system is also able to create, with make dist, a tar ball release which compiles correctly, and has files which seemed to be important to have. The patch removes few unnecessary files, but no everything. Files procps.lsm and procps.spec in git repository are useless as is, but I left them lying around for someone who can make more justified call about removal of them. Last, but not least package version number is set 3.3.0 to distinct this procps from the sourceforge's upstream procps. Please notice that libproc relese is kept as 3.2.8. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-06-04 19:56:58 +05:30
dist_man_MANS = \
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
man/free.1 \
man/pgrep.1 \
man/pkill.1 \
man/pmap.1 \
man/vmstat.8 \
man/procps.3 \
man/procps_pids.3 \
man/procps_misc.3
build-sys: take autotools in use again This will revert change at Oct 2002 when autotools support was removed. Unlike before the package developers are expected to use ./autogen.sh to generate ./configure script, and run make after that. The build system is also able to create, with make dist, a tar ball release which compiles correctly, and has files which seemed to be important to have. The patch removes few unnecessary files, but no everything. Files procps.lsm and procps.spec in git repository are useless as is, but I left them lying around for someone who can make more justified call about removal of them. Last, but not least package version number is set 3.3.0 to distinct this procps from the sourceforge's upstream procps. Please notice that libproc relese is kept as 3.2.8. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-06-04 19:56:58 +05:30
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if !CYGWIN
dist_man_MANS += \
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
man/pwdx.1 \
man/tload.1 \
man/sysctl.8 \
man/sysctl.conf.5 \
man/ps.1
pgrep: add pwait
2020-02-24 08:32:59 +05:30
pidwait: Rename from pwait pwait is already in at least Debian in a different package References: https://bugs.debian.org/982391
2021-02-15 15:40:06 +05:30
if BUILD_PIDWAIT
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
dist_man_MANS += man/pidwait.1
pgrep: add pwait
2020-02-24 08:32:59 +05:30
endif
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
endif
Makefile.am fixes Two problems. 1) skill/snice : distribution doesnt mean install If you don't set your configure flags right, you dont install the skill/snice man pages which means you will break any subsequent compiles with the flags enabled. Man pages not to be installed should still be distributed. 2) The git version into Makefile.am breaks under certain conditions. The easy break for this is: touch aclocal.m4 make We need this script added plus some dist hook magic that got left out.
2012-05-20 12:57:14 +05:30
EXTRA_DIST = \
build-sys: include .version in EXTRA_DIST .version is created in the top_srdir which when building normally doesn't present a problem. When make distcheck is run, the source directory is made read-only and it fails with permission denied. The version of misc/git-version-gen is old and is missing the instruction to add .version to EXTRA_DIST. This commit does just that. make distcheck now passes. References: https://github.com/gagern/gnulib/blob/master/build-aux/git-version-gen https://lists.gnu.org/archive/html/bug-gnulib/2011-08/msg00000.html Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-09 11:57:37 +05:30
.version \
Makefile.am fixes Two problems. 1) skill/snice : distribution doesnt mean install If you don't set your configure flags right, you dont install the skill/snice man pages which means you will break any subsequent compiles with the flags enabled. Man pages not to be installed should still be distributed. 2) The git version into Makefile.am breaks under certain conditions. The easy break for this is: touch aclocal.m4 make We need this script added plus some dist hook magic that got left out.
2012-05-20 12:57:14 +05:30
autogen.sh \
COPYING.LIB \
build-sys: Move git-version-gen git-version-gen was the only file in misc/ moving it to local/
2022-08-29 16:23:01 +05:30
local/git-version-gen \
misc: Move Documentation to doc Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:08:52 +05:30
doc/CodingStyle.md \
doc/TODO \
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src/ps/HACKING \
src/ps/regression \
Moved man-po pot file creation into Makefile The pot files for man-po are part of the extra_dist target so are built at dist time. These used to be created as part of the dist-hook. However it is better to control their builds in the Makefile so they are conditionally built. It also means distcheck doesn't complain when they are added to the CLEANFILES.
2014-06-25 18:41:15 +05:30
$(DIST_MAN_POTS)
Makefile.am fixes Two problems. 1) skill/snice : distribution doesnt mean install If you don't set your configure flags right, you dont install the skill/snice man pages which means you will break any subsequent compiles with the flags enabled. Man pages not to be installed should still be distributed. 2) The git version into Makefile.am breaks under certain conditions. The easy break for this is: touch aclocal.m4 make We need this script added plus some dist hook magic that got left out.
2012-05-20 12:57:14 +05:30
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if !CYGWIN
EXTRA_DIST += \
sysctl.conf
endif
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
procpsngdir = $(docdir)
dist_procpsng_DATA = \
misc: Move Documentation to doc Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:08:52 +05:30
doc/bugs.md \
doc/FAQ \
doc/libproc.supp
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
pidof: reimplemented from scratch (replacing sysvinit pidof) As the sysvinit becomes obsolete, some of the bundled tools need to find a new home. The procps-ng project seems to be the most suitable project for adopting the pidof tool. This commit introduces a redesigned version of pidof that satisfies the LSB requirements. In corner cases the behaviour might differ from the former one as the new version doesn't use any stat(2) calls.
2013-10-05 00:05:01 +05:30
if BUILD_PIDOF
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if !CYGWIN
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
bin_PROGRAMS += src/pidof
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
else
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
usrbin_exec_PROGRAMS += src/pidof
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
endif
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
dist_man_MANS += man/pidof.1
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src_pidof_SOURCES = src/pidof.c local/fileutils.c
pidof: reimplemented from scratch (replacing sysvinit pidof) As the sysvinit becomes obsolete, some of the bundled tools need to find a new home. The procps-ng project seems to be the most suitable project for adopting the pidof tool. This commit introduces a redesigned version of pidof that satisfies the LSB requirements. In corner cases the behaviour might differ from the former one as the new version doesn't use any stat(2) calls.
2013-10-05 00:05:01 +05:30
else
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
EXTRA_DIST += man/pidof.1
pidof: reimplemented from scratch (replacing sysvinit pidof) As the sysvinit becomes obsolete, some of the bundled tools need to find a new home. The procps-ng project seems to be the most suitable project for adopting the pidof tool. This commit introduces a redesigned version of pidof that satisfies the LSB requirements. In corner cases the behaviour might differ from the former one as the new version doesn't use any stat(2) calls.
2013-10-05 00:05:01 +05:30
endif
build-sys: add --disable-kill build option The kill from procps-ng is not always wanted. For example RedHat seems to prefer kill from util-linux package. Reported-by: Jaromir Capik <jcapik@redhat.com> Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-10-04 23:46:46 +05:30
if BUILD_KILL
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if CYGWIN
transform += ;s/^kill/prockill/; $(program_transform_name)
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
usrbin_exec_PROGRAMS += src/kill
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
else
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
bin_PROGRAMS += src/kill
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
endif
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
dist_man_MANS += man/kill.1
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src_kill_SOURCES = src/kill.c local/strutils.c local/fileutils.c local/signals.c
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src_kill_LDADD =
Makefile.am fixes Two problems. 1) skill/snice : distribution doesnt mean install If you don't set your configure flags right, you dont install the skill/snice man pages which means you will break any subsequent compiles with the flags enabled. Man pages not to be installed should still be distributed. 2) The git version into Makefile.am breaks under certain conditions. The easy break for this is: touch aclocal.m4 make We need this script added plus some dist hook magic that got left out.
2012-05-20 12:57:14 +05:30
else
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
EXTRA_DIST += man/kill.1
build-sys: add --disable-kill build option The kill from procps-ng is not always wanted. For example RedHat seems to prefer kill from util-linux package. Reported-by: Jaromir Capik <jcapik@redhat.com> Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-10-04 23:46:46 +05:30
endif
configure: Add --disable-w Some systems implement utmp as a stub so it doesn't make sense to have a non-functioning w. This change mitigates #193 and !126 References: procps-ng/procps!129 procps-ng/procps!126 procps-ng/procps#193
2021-04-24 01:28:36 +05:30
if BUILD_W
if CYGWIN
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
usrbin_exec_PROGRAMS += src/w
configure: Add --disable-w Some systems implement utmp as a stub so it doesn't make sense to have a non-functioning w. This change mitigates #193 and !126 References: procps-ng/procps!129 procps-ng/procps!126 procps-ng/procps#193
2021-04-24 01:28:36 +05:30
else
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
bin_PROGRAMS += src/w
configure: Add --disable-w Some systems implement utmp as a stub so it doesn't make sense to have a non-functioning w. This change mitigates #193 and !126 References: procps-ng/procps!129 procps-ng/procps!126 procps-ng/procps#193
2021-04-24 01:28:36 +05:30
endif
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
dist_man_MANS += man/w.1
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src_w_SOURCES = src/w.c local/fileutils.c
configure: Add --disable-w Some systems implement utmp as a stub so it doesn't make sense to have a non-functioning w. This change mitigates #193 and !126 References: procps-ng/procps!129 procps-ng/procps!126 procps-ng/procps#193
2021-04-24 01:28:36 +05:30
else
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
EXTRA_DIST += man/w.1
configure: Add --disable-w Some systems implement utmp as a stub so it doesn't make sense to have a non-functioning w. This change mitigates #193 and !126 References: procps-ng/procps!129 procps-ng/procps!126 procps-ng/procps#193
2021-04-24 01:28:36 +05:30
endif
ncurses and configure again Another fix to link properly to ncurses Some minor top fixes Added *~ to gitignore because these files crop up sometimes
2011-10-27 03:23:55 +05:30
if WITH_NCURSES
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if !CYGWIN
build-sys: install binaries in bindir (get rid of usrbin_execdir) The "usrbin_execdir" hack meant to install some binaries in /bin and others in /usr/bin. However: - It is very inflexible: not much control on the final directory name and it is not possible to get rid of the usr/bin suffix without patching the build system. - It is hard to use: it requires configure to receive --exec_prefix=/ and other settings do not make much sense. It is not very obvious that that setting needs to be passed and it takes a while to figure it out. - It produces garbage with the default setup: the default prefix of /usr/local ends up installing the binaries under /usr/local/usr/bin which does not make any sense. Furthermore, the requirement to split binaries in /bin and /usr/bin is not that strong since some distributions adopted the /usr merge and so would agree to just deploy all binaries to /usr/bin directly. Distributions that would still like to split /bin from /usr/bin should actually move binaries such as `ps` and `kill` to /bin after the install of procps-ng is complete. After all, they are the ones responsible for determining what are the binaries that need to be in the root partition and that list depends on their early boot init scripts, so it is possible that the list must be augmented with other binaries from this package. Therefore, I propose here to get rid of that hack and simply install all the binaries to bindir instead, which solves the problems described above and simplifies the build and install of procps-ng. Tested that it builds and both `make check` and `make distcheck` work. Tested that `make install` works and produces the expected tree, the only difference being the absence of the bogus /usr/local/usr/bin directory and now all binaries are merged into /usr/local/bin as expected. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 11:57:13 +05:30
bin_PROGRAMS += \
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src/watch \
src/top/top
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
else
usrbin_exec_PROGRAMS += \
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src/watch \
src/top/top
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
endif
build-sys: take autotools in use again This will revert change at Oct 2002 when autotools support was removed. Unlike before the package developers are expected to use ./autogen.sh to generate ./configure script, and run make after that. The build system is also able to create, with make dist, a tar ball release which compiles correctly, and has files which seemed to be important to have. The patch removes few unnecessary files, but no everything. Files procps.lsm and procps.spec in git repository are useless as is, but I left them lying around for someone who can make more justified call about removal of them. Last, but not least package version number is set 3.3.0 to distinct this procps from the sourceforge's upstream procps. Please notice that libproc relese is kept as 3.2.8. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-06-04 19:56:58 +05:30
dist_man_MANS += \
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
man/watch.1 \
man/top.1
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if !CYGWIN
bin_PROGRAMS += \
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src/slabtop
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
dist_man_MANS += \
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
man/slabtop.1
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src_slabtop_SOURCES = src/slabtop.c local/strutils.c local/fileutils.c
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src_slabtop_LDADD = $(LDADD) @NCURSES_LIBS@
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
endif
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src_watch_SOURCES = src/watch.c local/strutils.c local/fileutils.c
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src_watch_LDADD = @NCURSES_LIBS@ $(CYGWINFLAGS)
src_top_top_SOURCES = \
src/top/top.h \
src/top/top.c \
src/top/top_nls.h \
src/top/top_nls.c \
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
local/fileutils.c \
local/signals.c
Added Cygwin build support strverscmp is included to satisfy a dependency in Cygwin. Excluded utmp and prctl functions that are not supported currently.
2016-03-11 04:34:27 +05:30
if CYGWIN
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src_top_top_SOURCES += local/strverscmp.c
Added Cygwin build support strverscmp is included to satisfy a dependency in Cygwin. Excluded utmp and prctl functions that are not supported currently.
2016-03-11 04:34:27 +05:30
endif
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src_top_top_LDADD = $(LDADD) @NCURSES_LIBS@ $(DL_LIB)
build-sys: take autotools in use again This will revert change at Oct 2002 when autotools support was removed. Unlike before the package developers are expected to use ./autogen.sh to generate ./configure script, and run make after that. The build system is also able to create, with make dist, a tar ball release which compiles correctly, and has files which seemed to be important to have. The patch removes few unnecessary files, but no everything. Files procps.lsm and procps.spec in git repository are useless as is, but I left them lying around for someone who can make more justified call about removal of them. Last, but not least package version number is set 3.3.0 to distinct this procps from the sourceforge's upstream procps. Please notice that libproc relese is kept as 3.2.8. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-06-04 19:56:58 +05:30
endif
skill, snice: do not encourage building these utilities Both skill and snice are are mentioned in manual page to be 'obsolete and unportable'. This commit discourages distributors to keep these commands part of default system. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2012-03-16 01:59:13 +05:30
if BUILD_SKILL
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if !CYGWIN
build-sys: install binaries in bindir (get rid of usrbin_execdir) The "usrbin_execdir" hack meant to install some binaries in /bin and others in /usr/bin. However: - It is very inflexible: not much control on the final directory name and it is not possible to get rid of the usr/bin suffix without patching the build system. - It is hard to use: it requires configure to receive --exec_prefix=/ and other settings do not make much sense. It is not very obvious that that setting needs to be passed and it takes a while to figure it out. - It produces garbage with the default setup: the default prefix of /usr/local ends up installing the binaries under /usr/local/usr/bin which does not make any sense. Furthermore, the requirement to split binaries in /bin and /usr/bin is not that strong since some distributions adopted the /usr merge and so would agree to just deploy all binaries to /usr/bin directly. Distributions that would still like to split /bin from /usr/bin should actually move binaries such as `ps` and `kill` to /bin after the install of procps-ng is complete. After all, they are the ones responsible for determining what are the binaries that need to be in the root partition and that list depends on their early boot init scripts, so it is possible that the list must be augmented with other binaries from this package. Therefore, I propose here to get rid of that hack and simply install all the binaries to bindir instead, which solves the problems described above and simplifies the build and install of procps-ng. Tested that it builds and both `make check` and `make distcheck` work. Tested that `make install` works and produces the expected tree, the only difference being the absence of the bogus /usr/local/usr/bin directory and now all binaries are merged into /usr/local/bin as expected. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 11:57:13 +05:30
bin_PROGRAMS += \
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src/skill \
src/snice
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
else
usrbin_exec_PROGRAMS += \
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src/skill \
src/snice
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
endif
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src_skill_SOURCES = src/skill.c local/strutils.c local/fileutils.c local/signals.c
src_snice_SOURCES = src/skill.c local/strutils.c local/fileutils.c local/signals.c
skill, snice: do not encourage building these utilities Both skill and snice are are mentioned in manual page to be 'obsolete and unportable'. This commit discourages distributors to keep these commands part of default system. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2012-03-16 01:59:13 +05:30
dist_man_MANS += \
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
man/skill.1 \
man/snice.1
Makefile.am fixes Two problems. 1) skill/snice : distribution doesnt mean install If you don't set your configure flags right, you dont install the skill/snice man pages which means you will break any subsequent compiles with the flags enabled. Man pages not to be installed should still be distributed. 2) The git version into Makefile.am breaks under certain conditions. The easy break for this is: touch aclocal.m4 make We need this script added plus some dist hook magic that got left out.
2012-05-20 12:57:14 +05:30
else
EXTRA_DIST += \
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
man/skill.1 \
man/snice.1
skill, snice: do not encourage building these utilities Both skill and snice are are mentioned in manual page to be 'obsolete and unportable'. This commit discourages distributors to keep these commands part of default system. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2012-03-16 01:59:13 +05:30
endif
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src_free_SOURCES = src/free.c local/strutils.c local/fileutils.c
src_pgrep_SOURCES = src/pgrep.c local/fileutils.c local/signals.c
src_pkill_SOURCES = src/pgrep.c local/fileutils.c local/signals.c
src_pmap_SOURCES = src/pmap.c local/fileutils.c
pidwait: Rename from pwait pwait is already in at least Debian in a different package References: https://bugs.debian.org/982391
2021-02-15 15:40:06 +05:30
if BUILD_PIDWAIT
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src_pidwait_SOURCES = src/pgrep.c local/fileutils.c local/signals.c
pgrep: add pwait
2020-02-24 08:32:59 +05:30
endif
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if !CYGWIN
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src_pwdx_SOURCES = src/pwdx.c local/fileutils.c
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src_pwdx_LDADD= $(CYGWINFLAGS)
src_sysctl_SOURCES = \
src/sysctl.c \
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
local/fileutils.c \
local/procio.c
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src_sysctl_LDADD=
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
endif
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src_tload_SOURCES = src/tload.c local/strutils.c local/fileutils.c
src_uptime_SOURCES = src/uptime.c local/fileutils.c
src_vmstat_SOURCES = src/vmstat.c local/strutils.c local/fileutils.c
build-sys: take autotools in use again This will revert change at Oct 2002 when autotools support was removed. Unlike before the package developers are expected to use ./autogen.sh to generate ./configure script, and run make after that. The build system is also able to create, with make dist, a tar ball release which compiles correctly, and has files which seemed to be important to have. The patch removes few unnecessary files, but no everything. Files procps.lsm and procps.spec in git repository are useless as is, but I left them lying around for someone who can make more justified call about removal of them. Last, but not least package version number is set 3.3.0 to distinct this procps from the sourceforge's upstream procps. Please notice that libproc relese is kept as 3.2.8. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-06-04 19:56:58 +05:30
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
# See http://www.gnu.org/software/libtool/manual/html_node/Updating-version-info.html
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
LIBproc2_CURRENT=0
build-sys: Set library to 0:1:0 There was a bug fix in the library but no functions add/moved/changed Revision incremented.
2022-12-05 15:34:05 +05:30
LIBproc2_REVISION=1
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
LIBproc2_AGE=0
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_libproc2_la_LIBADD = $(LIB_KPARTS)
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
if WITH_SYSTEMD
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_libproc2_la_LIBADD += @SYSTEMD_LIBS@
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
endif
Add support for elogind A session manager similar to logind from systemd. See https://github.com/elogind/elogind Signed-off-by: Lars Wendler <polynomial-c@gentoo.org>
2017-05-30 20:03:28 +05:30
if WITH_ELOGIND
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_libproc2_la_LIBADD += @ELOGIND_LIBS@
Add support for elogind A session manager similar to logind from systemd. See https://github.com/elogind/elogind Signed-off-by: Lars Wendler <polynomial-c@gentoo.org>
2017-05-30 20:03:28 +05:30
endif
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_libproc2_la_LDFLAGS = \
-version-info $(LIBproc2_CURRENT):$(LIBproc2_REVISION):$(LIBproc2_AGE) \
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
-no-undefined \
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
-Wl,--version-script=$(top_srcdir)/library/libproc2.sym
build-sys: Relocate library to library/ All the dependent programs needed to have their includes moved too Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:32:44 +05:30
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_libproc2_la_SOURCES = \
build-sys: Relocate library to library/ All the dependent programs needed to have their includes moved too Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:32:44 +05:30
library/devname.c \
library/include/devname.h \
library/diskstats.c \
library/include/diskstats.h \
library/escape.c \
library/include/escape.h \
library/include/procps-private.h \
library/meminfo.c \
library/include/meminfo.h \
library/include/misc.h \
library/namespace.c \
library/numa.c \
library/include/numa.h \
library/pids.c \
library/include/pids.h \
library/pwcache.c \
library/include/pwcache.h \
library/readproc.c \
library/include/readproc.h \
library/slabinfo.c \
library/include/slabinfo.h \
library/stat.c \
library/include/stat.h \
library/sysinfo.c \
library/version.c \
library/vmstat.c \
library/include/vmstat.h \
library/wchan.c \
library/include/wchan.h \
library/uptime.c \
library/include/xtra-procps-debug.h
testsuite: Update the library tests for new location Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:10:45 +05:30
library_libproc2_la_includedir = $(includedir)/libproc2/
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_libproc2_la_include_HEADERS = \
build-sys: Relocate library to library/ All the dependent programs needed to have their includes moved too Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:32:44 +05:30
library/include/diskstats.h \
library/include/meminfo.h \
library/include/misc.h \
library/include/pids.h \
library/include/slabinfo.h \
library/include/stat.h \
library/include/vmstat.h \
library/include/xtra-procps-debug.h
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = \
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library/libproc2.pc
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
EXTRA_DIST += library/libproc2.sym
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
# ps/pscommand
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src_ps_pscommand_SOURCES = \
src/ps/common.h \
src/ps/display.c \
src/ps/global.c \
src/ps/help.c \
src/ps/output.c \
src/ps/parser.c \
src/ps/select.c \
src/ps/sortformat.c \
src/ps/stacktrace.c \
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
local/fileutils.c \
local/signals.c
build-sys: merge automake subdirs into toplevel This will be required for subdir-objects, otherwise automake will have problems with more than one Makefile.am having rules to build the same files. Tested that it builds and both `make check` and `make distcheck` work. Tested `make install` and compared the tree with the one installed before this commit, both installed the binaries to the same locations. The binaries are also in the same location in the build tree (for instance, ps/pscommand is still there.) Checked the binaries for the correct libraries linked into them. Binary sizes matched before and after this change. Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-02 09:58:53 +05:30
A locale-independent strtod There is a need in some utilities to have a way of accepting both types of decimal points "." and ",". The only way seems to be to rebuild strtod(). This new function will accept "123.456" and "123,456" as 123.456 and considers them the same number. It means we lose thousands separator, but this is rarely used. test scripts are added to check the function returns the proper values. There was simpler predecessor that got stuck on negative 0 or -0.123 which these tests flushed out. References:
2016-03-03 15:54:08 +05:30
build-sys: tweak make & activate some overlooked tests This commit is just preparing for adding an Itemtables verification test by reorganizing stuff and activating a few previously inactive (overlooked?) test programs. Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-08-15 20:40:10 +05:30
# Test programs required for dejagnu or standalone testing
build-sys: Build check programs only on make check noinst_PROGRAMS are built with "make" even though we had the test programs in there and only needed them for "make check". In theory the check target should depend on check_PROGRAMS as check-am target does and the document states it should, but for reasons understood by the automake whisperers only, it doesn't build them. check only depends on BUILT_SOURCES for some reason. check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive References: https://www.gnu.org/software/automake/manual/html_node/Scripts_002dbased-Testsuites.html
2020-10-19 14:35:41 +05:30
check_PROGRAMS = \
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src/tests/test_strutils \
src/tests/test_fileutils \
src/tests/test_process \
src/tests/test_strtod_nol \
src/tests/test_shm
src_tests_test_strutils_SOURCES = src/tests/test_strutils.c local/strutils.c
src_tests_test_strutils_LDADD = $(CYGWINFLAGS)
src_tests_test_fileutils_SOURCES = src/tests/test_fileutils.c local/fileutils.c
src_tests_test_fileutils_LDADD = $(CYGWINFLAGS)
src_tests_test_process_SOURCES = src/tests/test_process.c
src_tests_test_process_LDADD = $(CYGWINFLAGS)
src_tests_test_strtod_nol_SOURCES = src/tests/test_strtod_nol.c local/strutils.c
src_tests_test_strtod_nol_LDADD = $(CYGWINFLAGS)
src_tests_test_shm_SOURCES = src/tests/test_shm.c local/strutils.c
src_tests_test_shm_LDADD = $(CYGWINFLAGS)
build-sys: tweak make & activate some overlooked tests This commit is just preparing for adding an Itemtables verification test by reorganizing stuff and activating a few previously inactive (overlooked?) test programs. Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-08-15 20:40:10 +05:30
build-sys: Build check programs only on make check noinst_PROGRAMS are built with "make" even though we had the test programs in there and only needed them for "make check". In theory the check target should depend on check_PROGRAMS as check-am target does and the document states it should, but for reasons understood by the automake whisperers only, it doesn't build them. check only depends on BUILT_SOURCES for some reason. check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive References: https://www.gnu.org/software/automake/manual/html_node/Scripts_002dbased-Testsuites.html
2020-10-19 14:35:41 +05:30
check_PROGRAMS += \
build-sys: Relocate library to library/ All the dependent programs needed to have their includes moved too Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:32:44 +05:30
library/tests/test_Itemtables \
library/tests/test_pids \
library/tests/test_sysinfo \
library/tests/test_version \
library/tests/test_namespace
library_tests_test_Itemtables_SOURCES = library/tests/test_Itemtables.c
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_tests_test_Itemtables_LDADD = library/libproc2.la
build-sys: Relocate library to library/ All the dependent programs needed to have their includes moved too Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:32:44 +05:30
library_tests_test_pids_SOURCES = library/tests/test_pids.c
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_tests_test_pids_LDADD = library/libproc2.la
build-sys: Relocate library to library/ All the dependent programs needed to have their includes moved too Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:32:44 +05:30
library_tests_test_uptime_SOURCES = library/tests/test_uptime.c
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_tests_test_uptime_LDADD = library/libproc2.la
build-sys: Relocate library to library/ All the dependent programs needed to have their includes moved too Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:32:44 +05:30
library_tests_test_sysinfo_SOURCES = library/tests/test_sysinfo.c
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_tests_test_sysinfo_LDADD = library/libproc2.la
build-sys: Relocate library to library/ All the dependent programs needed to have their includes moved too Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:32:44 +05:30
library_tests_test_version_SOURCES = library/tests/test_version.c
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_tests_test_version_LDADD = library/libproc2.la
build-sys: Relocate library to library/ All the dependent programs needed to have their includes moved too Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:32:44 +05:30
library_tests_test_namespace_SOURCES = library/tests/test_namespace.c
library: Rename to libproc2 The newlib library used to be called libproc-2 but the new name is preferred. References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 16:08:17 +05:30
library_tests_test_namespace_LDADD = library/libproc2.la
A locale-independent strtod There is a need in some utilities to have a way of accepting both types of decimal points "." and ",". The only way seems to be to rebuild strtod(). This new function will accept "123.456" and "123,456" as 123.456 and considers them the same number. It means we lose thousands separator, but this is rarely used. test scripts are added to check the function returns the proper values. There was simpler predecessor that got stuck on negative 0 or -0.123 which these tests flushed out. References:
2016-03-03 15:54:08 +05:30
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if CYGWIN
misc: Move all binaries to src *.c -> src/ ps/* src/ps/ top/* src/top/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:59:28 +05:30
src_skill_LDADD = $(CYGWINFLAGS)
src_kill_LDADD = $(CYGWINFLAGS)
src_free_LDADD = $(CYGWINFLAGS)
src_pgrep_LDADD = $(CYGWINFLAGS)
src_pkill_LDADD = $(CYGWINFLAGS)
src_pidof_LDADD = $(CYGWINFLAGS)
src_pmap_LDADD = $(CYGWINFLAGS)
src_snice_LDADD = $(CYGWINFLAGS)
src_tload_LDADD = $(CYGWINFLAGS)
src_uptime_LDADD = $(CYGWINFLAGS)
src_w_LDADD = $(CYGWINFLAGS)
src_vmstat_LDADD = $(CYGWINFLAGS)
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
endif
build-sys: allow packagers to choose what is installed Distribution maintainers may not want to use upstream example files in their procps-ng package. Reference: http://permalink.gmane.org/gmane.linux.arch.devel/17440 Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2012-04-29 20:52:29 +05:30
if EXAMPLE_FILES
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
if !CYGWIN
build-sys: take autotools in use again This will revert change at Oct 2002 when autotools support was removed. Unlike before the package developers are expected to use ./autogen.sh to generate ./configure script, and run make after that. The build system is also able to create, with make dist, a tar ball release which compiles correctly, and has files which seemed to be important to have. The patch removes few unnecessary files, but no everything. Files procps.lsm and procps.spec in git repository are useless as is, but I left them lying around for someone who can make more justified call about removal of them. Last, but not least package version number is set 3.3.0 to distinct this procps from the sourceforge's upstream procps. Please notice that libproc relese is kept as 3.2.8. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-06-04 19:56:58 +05:30
sysconf_DATA = sysctl.conf
build-sys: allow packagers to choose what is installed Distribution maintainers may not want to use upstream example files in their procps-ng package. Reference: http://permalink.gmane.org/gmane.linux.arch.devel/17440 Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2012-04-29 20:52:29 +05:30
endif
Port of merge request 49 to newlib Wayne Porter made !49 which added Cygwin support to the master branch This is the port of those changes to newlib
2017-08-19 18:35:22 +05:30
endif
build-sys: take autotools in use again This will revert change at Oct 2002 when autotools support was removed. Unlike before the package developers are expected to use ./autogen.sh to generate ./configure script, and run make after that. The build system is also able to create, with make dist, a tar ball release which compiles correctly, and has files which seemed to be important to have. The patch removes few unnecessary files, but no everything. Files procps.lsm and procps.spec in git repository are useless as is, but I left them lying around for someone who can make more justified call about removal of them. Last, but not least package version number is set 3.3.0 to distinct this procps from the sourceforge's upstream procps. Please notice that libproc relese is kept as 3.2.8. Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2011-06-04 19:56:58 +05:30
build-sys: earlier patch broke the build The commit 47cc1b6ccfd1e6e10aafbf21e932991a10c97f7e might have fixed an issue when distribution is built, but it broke make after running ./configure which this commit fixes. Reference: http://www.delorie.com/gnu/docs/automake/automake_66.html Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2012-06-24 16:21:18 +05:30
BUILT_SOURCES = $(top_srcdir)/.version
Fix some man-po stuff for distcheck distcheck failed because the man-po scripts weren't sourcing or escaping the directories correctly. This is a partial fix, but at least distcheck is happy.
2014-06-24 17:50:13 +05:30
build-sys: Add check-lib target The referenced commits created the library infrastructure and test program to validate that the structures and macros line up with each other. The library needs to be (re)built with -DITEMTABLE_DEBUG and then the test program ran. We clean before and after so we are not testing a non-debug library or having a debug library hanging around to cause future problems. Due to test_Itemtables depending on the library, we don't need to explicitly build the library. To validate the library structure/header corrospondence run: make check-lib References: commit e616409aa497b5dc656dc7a5bd0a21adf0ee4d36 commit 92d0297e1e4d5946c5b098e37c91c7e524a0eca0 https://www.freelists.org/post/procps/keep-on-patchin,19
2020-10-19 13:55:33 +05:30
check-lib: clean
build-sys: Fix paths for check-lib Forgot to move the location for test_Itemtables Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-31 13:00:34 +05:30
$(MAKE) CFLAGS=-DITEMTABLE_DEBUG library/tests/test_Itemtables
$(top_builddir)/library/tests/test_Itemtables
build-sys: a small tweak to the new 'check-lib' target So as to not obscure the results from this new target, we'll redirect that final 'make clean' output to null. Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-10-21 10:30:00 +05:30
$(MAKE) clean &>/dev/null
build-sys: Add check-lib target The referenced commits created the library infrastructure and test program to validate that the structures and macros line up with each other. The library needs to be (re)built with -DITEMTABLE_DEBUG and then the test program ran. We clean before and after so we are not testing a non-debug library or having a debug library hanging around to cause future problems. Due to test_Itemtables depending on the library, we don't need to explicitly build the library. To validate the library structure/header corrospondence run: make check-lib References: commit e616409aa497b5dc656dc7a5bd0a21adf0ee4d36 commit 92d0297e1e4d5946c5b098e37c91c7e524a0eca0 https://www.freelists.org/post/procps/keep-on-patchin,19
2020-10-19 13:55:33 +05:30
build-sys: cleanup of tests Removed dependencies on test_nsutils as they are not used in newlib. Had two TESTS lines due to master merge, now only one.
2016-07-09 10:36:32 +05:30
# Test programs not used by dejagnu but run directly
build-sys: tweak make & activate some overlooked tests This commit is just preparing for adding an Itemtables verification test by reorganizing stuff and activating a few previously inactive (overlooked?) test programs. Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-08-15 20:40:10 +05:30
TESTS = \
build-sys: Relocate library to library/ All the dependent programs needed to have their includes moved too Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 14:32:44 +05:30
library/tests/test_pids \
library/tests/test_sysinfo \
library/tests/test_version \
library/tests/test_namespace \
build-sys: Relocate lib/ test files in lib go to src/tests include/ goes to local/ lib/*.c goes to local/ Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 15:58:03 +05:30
src/tests/test_fileutils \
src/tests/test_strtod_nol
build-sys: tweak make & activate some overlooked tests This commit is just preparing for adding an Itemtables verification test by reorganizing stuff and activating a few previously inactive (overlooked?) test programs. Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-08-15 20:40:10 +05:30
build-sys: Build check programs only on make check noinst_PROGRAMS are built with "make" even though we had the test programs in there and only needed them for "make check". In theory the check target should depend on check_PROGRAMS as check-am target does and the document states it should, but for reasons understood by the automake whisperers only, it doesn't build them. check only depends on BUILT_SOURCES for some reason. check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-TESTS check: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) check-recursive References: https://www.gnu.org/software/automake/manual/html_node/Scripts_002dbased-Testsuites.html
2020-10-19 14:35:41 +05:30
# Automake should do this, but it doesn't
build-sys: check depends on programs For some unknown reason, make check doesn't depend on either the check programs or the actual programs under test. This means if you try to run make check right off the bat from a clean git repositorty, it will fail as it won't be able to run the unbuilt binaries.
2022-03-21 16:07:17 +05:30
check: $(check_PROGRAMS) $(PROGRAMS)
library: tests for sysinfo First set of tests for the library API, this lot checks the two functions out of sysinfo.c Signed-off-by: Craig Small <csmall@enc.com.au>
2015-07-20 17:53:21 +05:30
Makefile.am fixes Two problems. 1) skill/snice : distribution doesnt mean install If you don't set your configure flags right, you dont install the skill/snice man pages which means you will break any subsequent compiles with the flags enabled. Man pages not to be installed should still be distributed. 2) The git version into Makefile.am breaks under certain conditions. The easy break for this is: touch aclocal.m4 make We need this script added plus some dist hook magic that got left out.
2012-05-20 12:57:14 +05:30
$(top_srcdir)/.version:
build-sys: earlier patch broke the build The commit 47cc1b6ccfd1e6e10aafbf21e932991a10c97f7e might have fixed an issue when distribution is built, but it broke make after running ./configure which this commit fixes. Reference: http://www.delorie.com/gnu/docs/automake/automake_66.html Signed-off-by: Sami Kerola <kerolasa@iki.fi>
2012-06-24 16:21:18 +05:30
touch $(top_srcdir)/.version
Makefile.am fixes Two problems. 1) skill/snice : distribution doesnt mean install If you don't set your configure flags right, you dont install the skill/snice man pages which means you will break any subsequent compiles with the flags enabled. Man pages not to be installed should still be distributed. 2) The git version into Makefile.am breaks under certain conditions. The easy break for this is: touch aclocal.m4 make We need this script added plus some dist hook magic that got left out.
2012-05-20 12:57:14 +05:30
echo $(VERSION) > $@-t && mv $@-t $@
dist-hook:
echo $(VERSION) > $(distdir)/.tarball-version
Moved man-po pot file creation into Makefile The pot files for man-po are part of the extra_dist target so are built at dist time. These used to be created as part of the dist-hook. However it is better to control their builds in the Makefile so they are conditionally built. It also means distcheck doesn't complain when they are added to the CLEANFILES.
2014-06-25 18:41:15 +05:30
Added get-trans target to Makefile The get-trans target rsyncs the latest copies of translation files from the translation project. I put this target in because I always forget the exact syntax of the command. Signed-off-by: Craig Small <csmall@enc.com.au>
2014-02-22 06:04:53 +05:30
get-trans:
Translated man page scripts Mario sent some scripts to maintain translated man pages. This commit is almost the same scripts with minor adjustments. Reference: http://www.freelists.org/post/procps/Translations-for-man-pages,17
2014-05-28 15:21:37 +05:30
echo "Getting the latest translations from translationproject.org..."
fix url for rsync Signed-off-by: Trần Ngọc Quân <vnwildman@gmail.com>
2014-04-17 12:42:01 +05:30
rsync -Lrtvz translationproject.org::tp/latest/procps-ng/ po
build-sys: Rearrange the manual pages All man pages are found in ./man man-po -> po-man References: https://www.freelists.org/post/procps/Next-for-newlib,3 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-08-29 13:37:43 +05:30
rsync -Lrtvz translationproject.org::tp/latest/procps-ng-man/ po-man
nls: Update the man-po logic Put the man-po pot file under version control like its po/*.pot sibling. Makefile now auto-matically generates the list of man pages as they are in a single directory. There were some missing! pot file target is dependent on the untranslated man pages When downloading from translation project, run po4a to sync the new po files correctly. Downloaded man po files from translation project and synched. Thanks to @gorean for the info References: procps-ng/procps#258 Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-11-10 16:22:19 +05:30
rm -f po-man/man.stamp