If a hash results report is output (via UNREF_RPTHASH)
a portion is devoted to occupied table entries ordered
by depth. There is a possibility that some depths will
not be found among existing occupied table entries and
to avoid any confusion probably should not be printed.
[ to illustrate the potential for confusion prior to ]
[ this patch, force a very small table size (like 8) ]
[ & then trigger the procps_pids_unref() eoj report. ]
So this patch ensures only 'in use' entries are shown.
[ admittedly, all of the remaining logic in the loop ]
[ could/should be subordinate to this new 'if' test, ]
[ but we will keep the change to a minimum. besides, ]
[ there's no harm subtracting/adding a zero numdepth ]
[ especially since the chance of a zero is very low. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch just raises the size of the hash table used
to calculate elapsed task stuff. The net result should
be less need for 'chaining' under pid hash collisions.
[ the hash scheme is intentionally kept as primitive ]
[ and, therefore, as fast as possible. it employs an ]
[ 'and' approach versus a 'mod' operation since both ]
[ yield similar distribution but the former approach ]
[ was 4 fewer cpu instructions in terms of overhead. ]
[ additionally, for hash collisions, 'chaining' uses ]
[ an array index rather than the usual pointer since ]
[ the HST_t guys may move when they are reallocated. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch separates the memory allocations into those
used initially from those used in later reallocations.
Thus, we can reduce that iterative realloc() overhead.
Additionally, we'll correct a long standing oops where
multiple history_info structures were created at 'new'
time when only one should have been allocated (jeeze).
[ originally the allocation was strangely based upon ]
[ number of 'items' (???) & later a #define constant ]
Reference(s):
. May, 2016 - subsequent bad history_info logic
commit 9ebadc1438
. Aug, 2015 - original faulty history_info code
commit 7e6a371d8a
Signed-off-by: Jim Warner <james.warner@comcast.net>
There's a huge toe-stubber awaiting future maintenance
as reflected in that commit below which deals with the
addition of new enumerators to the Item_table. Namely,
whenever the table is grown, one must remember to also
change that existing 'logical_end' enumerator's value.
Well, not anymore! Since that MAXTABLE macro was added
to the procps-private.h header we can now also exploit
it so a 'logical_end' automatically tracks table size.
This change also renders some code associated with the
ITEMTABLE_DEBUG #define unnecessary. So it's gone too.
Reference(s):
. 08/2016, add new enumerators
commit 09e1886c9e
. 08/2020, added MAXTABLE macro
commit c865b06c30
. 08/2020, introduced ITEMTABLE_DEBUG
commit 92d0297e1e
Signed-off-by: Jim Warner <james.warner@comcast.net>
The recent work on updating the <meminfo> and <vmstat>
modules with some newly added linux fields reminded me
(again) of a need for some mechanism guaranteeing that
a header file agrees with the source file assumptions.
Sadly, in the past, if a table entry was omitted or if
the table and header are ordered differently, then the
library would silently return the wrong results values
or even potentially experience a SIGSEGV abnormal end.
This patch offers a much needed development assist for
ensuring that Item_table entries are synchronized with
header file enumerators in terms of number plus order.
It's intended solely for our use as libprocps evolves.
Now, by activating ITEMTABLE_DEBUG, either directly or
via ./configure CFLAGS='-DITEMTABLE_DEBUG', the number
and order will be verified. It is envisioned that this
feature will be used at least once prior to a release.
Signed-off-by: Jim Warner <james.warner@comcast.net>
I almost feel like I should apologize for this kind of
patch ( *almost* ). But, since this comment was unique
to the <pids> api and since it was especially designed
to align with the following comment and since the next
comment already carried the alignment emphasis, I will
refrain from issuing any apology and submit it anyway.
[ plus to prove that i am not totally anal-retentive ]
[ and can exercise some restraint there are two more ]
[ places where i COULD have added alignment emphasis ]
[ see lines 804-806 and lines 1360-1361 for my proof ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch just trades the 'typestr' for the much more
meaningful 'valid range' when a relative enum has been
deemed invalid under that XTRA_PROCPS_DEBUG provision.
[ and we'll also make one comment a bit more generic ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will just correct an oops introduced in the
commit shown below. Thank goodness both 'str' & 'strv'
occupy the same storage location in that result union.
Reference(s):
. standardize 'errno' management
commit 06be33b43e
Signed-off-by: Jim Warner <james.warner@comcast.net>
Some parts of our newlib implementation are the result
of functions which have been propagated from module to
module. In particular, those 'cleanup_stacks' routines
are all similar & likely originated in the <pids> api.
In that interface there was a need to free dynamically
acquired memory before the result structure was reused
to satisfy subsequent 'get', 'select' or 'reap' calls.
This, in turn, led to a concept of 'dirty' stacks with
the need to call one of two 'cleanup_stack' functions.
None of the remaining interfaces deal with such memory
yet they each had their own 'cleanup_stack' functions.
Those functions were responsible for resetting each of
the result unions to zero, excluding any 'noop' items.
The bottom line is that for all interfaces, repetitive
calls would require iterating through the stack(s) two
separate times: once to 'cleanup' another to 'assign'.
With this commit we will reduce iterations to just the
'assign' routine. A reset to zero will be accomplished
in the 'extra' item set routine (which is the only one
actually requiring any reset). All other items will be
reinitialized automatically by a new current set value
or upon reallocation when an items compliment changes.
In the <pids> interface, any freeing of dynamic memory
could have been accomplished by adding that 'freefunc'
check to the 'assign' function. However, that requires
an Item_table test with every item. Instead, we'll now
satisfy such needs as the very first step in those set
functions responsible for dynamically acquired memory.
[ the <pids> api retains 2 'cleanup_stack' functions ]
[ to accommodate stack(s) 'reset' & to serve 'unref' ]
Lastly, all the 'itemize_stack' functions were tweaked
by eliminating an unnecessary initialization of result
unions. That objective was already accomplished by the
calloc() in a 'stacks_alloc' function or the remaining
'cleanup_stack' routine found in the <pids> interface.
Signed-off-by: Jim Warner <james.warner@comcast.net>
When the <pids> api was refactored in the commit shown
below, one objective was enabling the simultaneous use
of 'get' & 'select/reap' functions. Unlike other 'get'
functions, this <pids> 'get' acts as an iterator where
successive calls will return successive tasks/threads.
However, that goal wasn't quite met since a stack used
by 'get' was commingled with the 'select/reap' stacks.
Such commingling supported the 'reset' function, again
a provision which was unique to this <pids> interface.
Unfortunately, some poor assumptions in 'stacks_fetch'
produced a SEGV whenever 'reap/select' followed 'get'.
Thus, this patch addresses those issues and guarantees
such commingled stacks (extents) will be accommodated.
Reference(s):
. standardize portions of interface, <PIDS> api
commit 9ebadc1438
Signed-off-by: Jim Warner <james.warner@comcast.net>
The commit referenced below addressed (some) anomalies
surrounding 'strv' pointers. However, there remained a
couple quirks involving a potential NULL return value.
Any NULL values returned from the old library readproc
guys would cause no real harm for newlib. But they did
produce the misleading "[ duplicate ENUM_ID ]" result.
The following all represent potential NULL results and
suggest shortcomings in testing of that earlier patch.
. kernel threads do not have cgroup, cmdline & environ
. even if present environ could require root to access
So, this patch reverts a portion of the earlier commit
and ensures when some vectored string is not available
a traditional dash ('-') is the 'strv' returned value.
[ and we'll also correct one typo in the header file ]
Reference(s):
. eliminated a final potential NULL, <PIDS> api
commit 09503dc597
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46
. 01/2019, <stat> origins tweaked
commit 201e816b26
Signed-off-by: Jim Warner <james.warner@comcast.net>
This change is being made in anticipation of adding the
source origin of each item to the <pids.h> header file.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch is the first of three implementing a newlib
branch version of that Jan Rybar master merge request.
With this series we'll ultimately extend 'EXE' support
to both ps and top (plus, everyone else who wants it).
Reference(s):
. master branch merge request
https://gitlab.com/procps-ng/procps/merge_requests/66
Signed-off-by: Jim Warner <james.warner@comcast.net>
This detects an integer overflow of "strlen + 1", prevents an integer
overflow of "tot + adj + (2 * pSZ)", and avoids calling snprintf with a
string longer than INT_MAX. Truncate rather than fail, since the callers
do not expect a failure of this function.
---------------------------- adapted for newlib branch
. logic is now in pids.c
. former 'vectorize_this_str' is now 'pids_vectorize_this'
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the documentation update in the commit referenced
below, we should also account for such threads as they
will already be represented in the task/thread totals.
[ and do it in a way that might avoid future changes ]
Reference(s):
commit 91df65b9e7
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit removes some obsolete parameter validation
code which was needed back when certain functions were
public, called directly by users (1st/2nd generation).
Now that they're static they can be safely eliminated.
Signed-off-by: Jim Warner <james.warner@comcast.net>
With older library logic having been modified to avoid
using those potentially deadly alloc.h routines, while
improving 'errno' handling, we're ready to standardize
and enhance newlib's approach to any potential errors.
In so doing, we'll establish the following objectives:
. . . . . . . . . . . . . functions returning an 'int'
. an error will be indicated by a negative number that
is always the inverse of some well known errno.h value
. . . . . . . . . . . functions returning an 'address'
. any error will be indicated by a NULL return pointer
with the actual reason found in the formal errno value
And, when errno is manipulated directly we will strive
to do so whenever possible within those routines which
have been declared with PROCPS_EXPORT. In other words,
in the user callable functions defined in source last.
[ But, that won't always be possible. In particular, ]
[ all the 'read_failed' functions will sometimes set ]
[ 'errno' so that they can serve callers returning a ]
[ NULL or an int without duplicating a lot of logic. ]
[ Also, that includes one subordinate function which ]
[ was called by 'read_failed' in the <slabinfo> API. ]
------------------------------------------------------
Along the way, several additional miscellaneous issues
were addressed. They're listed here now for posterity.
. the '-1' return value passed outside the library was
eliminated since it would erroneously equate to -EPERM
. the stacks_fetch functions in <diskstats> and <stat>
weren't checked for their possible minus return values
. hash create was not checked in <meminfo> or <vmstat>
. fixed 'new' function faulty parm check in <slabinfo>
Signed-off-by: Jim Warner <james.warner@comcast.net>
. ensure whitespace exists between the code & comments
[ changing txt slightly keeps right margin alignment ]
. strive for more consistency with some comment styles
[ don't use C '/*' style where C++ '//' style exists ]
. removed the instance of double space in 1 assignment
[ still striving for consistency in whitespace usage ]
. fixed comment relating to number of 'derived fields'
[ the <meminfo> api recently added one new such enum ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch just rearranges 1 item in the stacks_extent
struct to make it equivalent to all the other modules.
Signed-off-by: Jim Warner <james.warner@comcast.net>
In response to that suggestion referenced below, these
changes allow display of task/thread level NUMA nodes.
Currently, only the 'top' program offers any NUMA type
support and it is limited to the Summary Area display.
With this commit both the 'top' and 'ps' programs will
be able to display NUMA nodes associated with threads.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/58
Signed-off-by: Jim Warner <james.warner@comcast.net>
In each module employing a priming read at 'new' time,
should that read fail, a call to 'unref' will be made.
However, there is a hidden dependency that these calls
must never occur before the context 'refcount' was set
due to the way an 'unref' conditional was constructed.
So this commit just ensures that 'unref' will function
as expected, even if called with a 'refcount' of zero.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Removing the Item_table 'stat' oldflags for WCHAN_ADDR
was wrong since that 'stat' field is not a constant 0.
Rather, it could assume these 3 values: -1, 0, and +1.
I have not been able to pin down a '-1' result, but it
probably means some sort of permission error (-EPERM).
The '1' or '0' values were supposed to distinguish the
tasks that were or were not blocked (whether there was
a wchan address). However, in practice there is little
correlation between those values and availability of a
kernel symbol in /proc/$$/wchan (perhaps due to race).
Anyway, the real point is that a 'stat' wchan does not
now intentionally contain an address. Thus, outputting
'ffffff', '-' or '1' in programs like ps is senseless.
So this patch just eliminates PIDS_WCHAN_ADDR from our
item enumerators leaving only the PIDS_WCHAN_NAME guy.
Now the new library can't be blamed for bad addresses!
Reference(s):
. removed Item_table 'oldflags'
commit c4aa6c0ab4
. linux removal of wchan addresses
commit b2f73922d119686323f14fbbe46587f863852328
Signed-off-by: Jim Warner <james.warner@comcast.net>
It seems inappropriate to blindly include fields known
to always be zero in our brand new library. Therefore,
this patch removes support for three such enumerators.
[ that stat 'it_real_value' (PIDS_ALARM) field could ]
[ have been made obsolete before a linux 2.6 release ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just contains some tweaks to comments plus
a few adjustments to whitespace for alignment purposes
and a normalization of the header inclusion #define's.
[ plus a spelling error in one header file was fixed ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Recent profiling and timings have resulted in improved
newlib performance. This patch completes that process.
It just normalizes naming conventions employed for all
allocations involving reaped stacks & history support.
The modules offering a 'reap' function will also offer
the now standardized corresponding STACKS_INCR define.
The modules which provide dynamic history support will
now have a separate #define called NEWOLD_INCR used in
allocations/reallocations. And, while values currently
are set equal to that STACKS_INCR value, in the future
some reason for divorcing those two may be discovered.
----------------------------- for future reference ---
In those modules which contain the STACKS_INCR #define
it is tempting to specify a large value so as to avoid
repeated calls to malloc/realloc. However, in doing so
an extra runtime price will be paid in 'cleanup_stack'
calls with any iterative programs like top or slabtop.
So, with the current values a balance has been sought.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch contains the following miscellaneous stuff:
. The pids_stacks_fetch() routine might call for newly
allocated stacks to be itemized. However, that job was
already tended to by the pids_stacks_alloc() function.
So, this patch just eliminates a redundant invocation.
------------------------------------------------------
. The concept of 'dirty_stacks' has not kept pace with
the evolving stacks implementation. Originally, stacks
were considered dirty only if free() of dynamic memory
was needed before refreshing any single result struct.
Later, with the introduction of the 'extra' item and a
promise to reset it to zero, 'dirty' was much broader.
So, this patch just treats the dirty flg as others do.
------------------------------------------------------
. Lastly, a word or three about performance & timings.
Tuning efforts concentrated on the <pids> API and top.
And unless an oldlib equivalent to the preceding patch
is applied (favoring stat vs. status), newlib top will
often outperform the oldlib version (obviously wrong).
So assuming /proc/stat is preferred in both libraries,
generally speaking, a cpu and elapsed time increase of
1-5% was found for this new stacks oriented interface.
Of course, there's also an increased memory footprint.
There are some occasions, however, when the newlib top
is at a substantial disadvantage. For example if WCHAN
or TTY is displayed, such items will be present in all
newlib reaped stacks (i.e. every process). But old top
would only incur such overhead with displayable tasks.
Thus, oldlib top could outperform newlib by up to 25%,
for example, if only fields requiring NO library flags
were displayed. However, such a scenario is not likely
since only GID, UID, PID, TGID & WCHAN would be shown.
In the usual case, that overhead associated with WCHAN
and/or TTY is overshadowed by other top runtime costs.
All in all a pleasing outcome I deem quite acceptable.
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
Long ago, in a galaxy far away (when top was in charge
of library FILL flgs) /proc/status was to be preferred
over /proc/stat if a field could be satisfied by both.
This was done to avoid costly 64-bit math emulation in
a 32-bit application due to 'unsigned long long' data.
Well it's time to acknowledge the prevalence of 64-bit
platforms. And in such an environment the cost picture
has shifted significantly. It now costs 14 times (wow)
as much to access /proc/status compared to /proc/stat.
In other words, even with '%llu' variables, a sscanf()
call in stat2proc() beats the pants off that home brew
gperf based hashing employed by the status2proc() guy.
In fact, status2proc incurs higher costs than found in
the most expensive aspect of top's forest view option.
Here's a gprof extract to illustrate the costs. It was
produced with an rcfile requiring fields from both the
/proc/stat & /proc/status pseudo files (among others).
There were 5000 iterations in each of 4 separate gprof
runs subsequently merged into 1 gmon.sum for analysis.
% self self
time seconds calls us/call name
----- ------- ------- ------- -----------
28.65 4.10 4689423 0.87 status2proc
26.14 3.74 40000 93.50 forest_adds
...
01.96 0.28 4689427 0.06 stat2proc
[ since forest_adds is recursive, the calls value is ]
[ the non-recursive #, its 'call graph' shows totals ]
Anyway, now that such cost is known this patch becomes
what is euphemistically known as the usual no-brainer.
[ jeeze, was it really this long between profilings? ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will begin some refinements associated with
gprof. Initially, functions names have been changed to
help in identifying potential bottlenecks. This effort
also included the obscure set, free and sort routines.
Plus the following additional modifications were made:
. the stacks_alloc prologue was generalized plus added
to a couple of modules where it had not yet propagated
. a couple of the '// end ...' comments were corrected
. some functions have been formally tagged as 'inline'
Signed-off-by: Jim Warner <james.warner@comcast.net>
Rather than return a 0 result for all VAL type errors,
return what would have been without validation active.
This will enable a program like pgrep to still print a
result even though it used some incorrect type member.
With this commit, our VAL macro validations logic will
behave in exactly the same way as the GET validations.
While warning messages may be issued, except for a bad
enumerator, values will always be returned to callers.
Signed-off-by: Jim Warner <james.warner@comcast.net>
One ought not to assume that random memory access will
always succeed or, when it does, that an obviously bad
item enumerator will always be found at that location.
Thus, this patch corrects some really poor assumptions
associated with the 'xtra_procps_debug.h' header file.
[ and it does so in somewhat contorted ways so as to ]
[ avoid several darn gcc -Wnonnull warning messages! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
During development, we now have a means for validating
that a type referenced in application code matches the
actual type set by the library. The new feature can be
activated through either of the following two methods:
1) ./configure CFLAGS='-DXTRA_PROCPS_DEBUG' (all pgms)
2) an #include <proc/xtra-procps-debug.h> (single pgm)
[ in the future, one could add a formal configure.ac ]
[ provision. but for now a manual approach is safer. ]
Lastly, for any module which provides a sort function,
the handling for both 'noop' & 'extra' enumerators was
made consistent. Now, 'noop' is not sorted and 'extra'
will be sorted as that module's widest supported type.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit attempts to minimize the variety of types
currently used. Plus, the following were also changed:
. the MEM fields were switched to parallel the VM guys
. PIDS_MEM_VIRT -> PIDS_MEM_VIRT_PGS
. PIDS_MEM_VIRT_KIB -> PIDS_MEM_VIRT
. made NICE 's_int' so that it then parallels PRIORITY
. change RTPRIO & SCHED_CLASS from 'ul_int' to 's_int'
. removed Item_table 'oldflags' for an obsoleted field
. PIDS_WCHAN_ADDR
. added calculations like TICS_ALL_C for the following
. PIDS_TICS_USER_C
. PIDS_TICS_SYSTEM_C
. these three new 'TICS' fields have been incorporated
. PIDS_TICS_BLKIO - jiffies spent in block i/o
. PIDS_TICS_GUEST - jiffies spent as a guest
. PIDS_TICS_GUEST_C - as above, includes dead children
. that PIDS_TICS_DELTA was renamed PIDS_TICS_ALL_DELTA
( so it did not hide between TICS_BLKIO & TICS_GUEST )
( and to make clearer what's included: utime + stime )
. eliminated 'sl_int' entirely from that result struct
[ often, the <pids> module changes necessitated that ]
[ readproc header and source files had to change too ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Many of our item enumerator identifiers are very long,
especially in that <VMSTAT> module. Additionally, they
all contain the exact same universal 'PROCPS_' prefix.
The origins for this are likely found in the desire to
avoid name clashes with other potential include files.
But with procps-ng newlib, we've probably gone way too
far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more
protection against clash than 'PIDS_TICS_SYSTEM' does?
I don't think so. Besides, no matter how big that name
becomes, one can never guarantee they'll never be some
clash. And, conversely, extremely short names will not
always create conflict. Of course, in either case when
some clash occurs, one can always #undef that problem.
Thus, this commit will eliminate that 'PROCPS_' prefix
making all of those enum identifiers a little shorter.
And, we'll still be well above some ridiculously short
(criminally short) names found in some common headers:
- - - - - - - - - - <term.h>
- 'tab', 'TTY', etc
- - - - - - - - - - - - - - - - <search.h>
- 'ENTER', ENTRY', 'FIND', etc
------------------------------------------------------
Finally, with this as a last of the wholesale changes,
we will have established the naming conventions below:
. only functions will begin with that 'procps_' prefix
. exposed structures begin with the module/header name
. item enumerators begin like structs, but capitalized
. other enumerators work exactly like item enumerators
. macros and constants begin just like the enumerators
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch attempts to standardize the naming of those
most important (declared not defined) context structs.
The present practice represents a hodge podge of names
only some of which reflect the source /proc file name.
And 2 of those file names embed a literal 'info' which
is likely the origin of that required parm identifier.
Now we'll append a universal '_info' to such structure
names, while including the names of those /proc pseudo
files where possible. In any case, that context struct
will *always* begin with the actual module/header file
name. And only the following two sound a little weird!
---------> 'meminfo_info' + 'slabinfo_info' <---------
Signed-off-by: Jim Warner <james.warner@comcast.net>
A collection of miscellaneous code and comment tweaks.
[ such changes will stop when desk checking ends too ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Yes, all of these changes are strictly cosmetic. It is
likely symptomatic of some deep-seated character flaw.
[ or, it might be because of a certain pride in this ]
[ new library and the desire to make it even better! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit brings all of those 'fetch' type functions
(supporting some form of 'reap') into closer alignment
with one another. The biggest impact is to be found in
the <stat> module, which now provides for the separate
copy of stack pointers which will be exposed to users.
The reason such a copy was not employed initially with
<stat>, unlike those for <pids> and <slabinfo>, is due
to the fact that such stacks were never sortable. Thus
the original raw consolidated extent pointers wouldn't
have been disturbed. But that meant no NULL delimiter.
So with this commit, all reap/fetch operations now use
pointer copies when returning results to callers. And,
all such arrays are now NULL delimited meaning callers
can choose their own access fencepost: totals or NULL.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Unlike other cached string fields (such as USER name),
that lxcname field was defined as 'const char *'. This
required a custom 'set' function using a cast in order
to avoid a compiler warning regarding that assignment.
So this commit brings lxcname into line with all those
other cached string fields. And while we're at it, the
reason some string fields have no 'freefunc' will also
be explained with some new comments in the Item_table.
Signed-off-by: Jim Warner <james.warner@comcast.net>
As those 3rd generation newlib APIs evolved so too did
the extents_free_all() function. Most versions of this
function required the callers to first verify that the
extents anchor wasn't empty, which was poor etiquette.
This simple function should have been much more robust
and forgiving. With this commit, it fnally becomes so.
Signed-off-by: Jim Warner <james.warner@comcast.net>
With all our 3rd generation interfaces, we're now well
positioned to preserve binary compatibility should new
fields be added to any public structure (assuming that
the 'result' union already contains its largest type).
This remains true even for the <pids> interface, which
unlike the others, has one structure embedded within a
separate struct rather than declaring a pointer to it.
The counts struct was positioned after the stacks ptrs
array so as to preserve that ABI if ever new ints were
added. Logically, however, the counts (especially that
total) should precede the stacks array if we wished to
properly place a horse (total) before a cart (stacks).
So to enable relocating those counts we will no longer
embed that structure, but provide a pointer to it. And
this will make accessing syntax feel more natural too.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch represents the following minor adjustments:
. old PROCTAB used with select & reap more descriptive
. reformatted PROCPS_PIDS_VAL macro like other 3rd gen
Signed-off-by: Jim Warner <james.warner@comcast.net>
When those items were made dynamic at 'new' time, some
other functions, previously assured of their presence,
failed to verify a 'reset' had acually been requested.
This commit just corrects that oversight and avoids an
attempt to 'assign_results' when no items are present.
Reference(s):
. when items/numitems became optional
commit 9ebadc1438
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the dust now settling on all those 3rd generation
upgrades, this patch tries to provide some consistency
among the separate modules involved. Someday we should
consider a 4th generation where all redundant code has
been removed and isolated in a new shared source file.
Following is a summary of significant changes (if any)
to each of these now upgraded 3rd gen library modules.
<meminfo> ............................................
. strictly formatting/comment changes, code unaffected
<pids> ...............................................
. replaced a local mkSTR macro with existing STRINGIFY
. added fetch narrative explaining duplicate addresses
<slabinfo> ...........................................
. rearranged some free logic for procps_slabinfo_unref
. added fetch narrative explaining duplicate addresses
<stat> ...............................................
. added #define ENFORCE_LOGICAL, just as in <slabinfo>
. replaced a local mkSTR macro with existing STRINGIFY
. alphabetized the function declarations in the header
<vmstat> .............................................
. made one coverity concession with read_vmstat_failed
[ several of these changes may reflect this author's ]
[ continuing pursuit of an unreasonable goal -- that ]
[ of a 'perfect' (plus 'pretty') C language program! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Though all those callback's parameters are ignored and
qsort treats them as pointers to void, it's wrong when
3rd parm is 'enum pids_item', not 'struct sort_parms'.
So we will fix it in a way that lessens the likelihood
of another such a mistake when some new type is added.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit simply tries to keep naming plus formating
conventions on a par with the continuing climb up that
learning curve. These changes were suggested following
<slabinfo> sources upgrade from 2nd to 3rd generation.
Signed-off-by: Jim Warner <james.warner@comcast.net>
In that reference below a specific systemd problem was
fixed in the commit shown. However lurking deep within
the <pids> interface was yet one final case where NULL
could be returned, involving 'strv' and the following:
. a user requested both a single string vector (always
returned as a normal string) & the vectorized version,
as with PROCPS_PIDS_CMDLINE and PROCPS_PIDS_CMDLINE_V.
. a user simply duplicated some vectorized enum items.
The root of that NULL problem is the fact those single
string vectors shared the same proc_t field with their
true vectorized version. So while multiple occurrences
for most strings could be satisfied with strdup versus
the normal ownership usurpation, those true vectorized
fields could not be quite so easily copied/duplicated.
Thus newlib chose to return a NULL result.strv pointer
under either of the above scenarios (which perhaps was
just a user boo-boo in the first place). In any event,
the NULL was a potential for true string vectors only.
Now, since newlib is the sole caller into the readproc
module, separate fields have been created for what are
just normal strings (never vectorized) and those which
remain the true vectorized versions. And, former flags
which only worked if combined, now act as stand alone.
Thus, both PROCPS_PIDS_CMDLINE & PROCPS_PIDS_CMDLINE_V
can be used simultaneously (as they should have been).
Also with this patch, items which a user duplicates in
the stack (beyond the first such item) will return the
the string "[ duplicate ENUM_ID ]". This practice will
apply to both single strings and true vectorized ones.
In addition to informing users of their error, it will
also mean potential NULLs need now never be a concern.
Reference(s);
http://www.freelists.org/post/procps/systemd-binary-vs-library
commit 0580a7b4c6
Signed-off-by: Jim Warner <james.warner@comcast.net>
