Commit Graph

253 Commits

Author SHA1 Message Date
Jim Warner
629fa81b57 misc: eliminate all those remaining gcc -Wall warnings
Reference(s):
proc/readproc.c: In function 'statm2proc'
proc/readproc.c:627:9: warning: variable 'num' set but not used [-Wunused-but-set-variable]

ps/output.c: In function 'pr_context':
ps/output.c:1273:14: warning: unused variable 'tried_load' [-Wunused-variable]
ps/output.c:1272:16: warning: unused variable 'ps_is_selinux_enabled' [-Wunused-variable]
ps/output.c:1272:16: warning: 'ps_is_selinux_enabled' defined but not used [-Wunused-variable]
ps/output.c:1273:14: warning: 'tried_load' defined but not used [-Wunused-variable]
ps/output.c:1837:18: warning: 'shortsort_array_count' defined but not used [-Wunused-const-variable=]
ps/output.c:1803:18: warning: 'aix_array_count' defined but not used [-Wunused-const-variable=]

ps/parser.c: In function 'arg_type':
ps/parser.c:1098:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
ps/parser.c:1099:34: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'

ps/sortformat.c: In function 'format_parse':
ps/sortformat.c:241:1: warning: label 'out' defined but not used [-Wunused-label]

ps/stacktrace.c:176:13: warning: 'stack_trace_sigsegv' defined but not used [-Wunused-function]

watch.c: In function 'process_ansi':
watch.c:234:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
watch.c:237:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'

Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-05-22 21:34:32 +10:00
Jim Warner
c41c614b0c ps: provide 'namespace' protection for 32-bit compiles
This patch ensures that namespace output will look the
same whether ps is built under a 32 or a 64-bit model.

[ it would have been easier to change that library's ]
[ data type, but we'll avoid breaking that ABI again ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-12-07 21:51:14 +11:00
Jim Warner
da9f31ef3e ps: now made responsive to 32 or 64-bit address widths
While a Debian bug report referenced below was limited
to the 'eip' and 'esp' fields, this patch also extends
address width adaptations to some other addresses too.

[ and, we do so in a far less invasive manner than a ]
[ redhat approach shown below adding two new fields! ]

Reference(s):
. new debian bug report
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=846361
. old redhat solution
https://bugzilla.redhat.com/show_bug.cgi?id=244152

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-12-07 21:51:06 +11:00
Martin Polednik
f8ccf3126e ps: recognize SCHED_DEADLINE 2016-11-07 10:23:01 +01:00
Thomas Petazzoni
4fc9a34802 ps/output.c: include <dlfcn.h> only when necessary
dlopen() functionality is only used when SELinux support is enabled, so
<dlfcn.h> only needs to be included when ENABLE_LIBSELINUX is
defined. This fixes the build in configurations where <dlfcn.h> is not
available.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-08-07 11:08:26 +02:00
Jim Warner
eca9168617 misc: adapted others to that new proc_t 'cgname' field
This patch adapts the ps program to a newly add proc_t
field and provides for new support in that top program
along with his man document (ps was already ok there).

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-06 21:33:17 +10:00
Jim Warner
8a198e3eaf ps: adapt to revised approach for --with-systemd build
We'll now display a '?' for any systemd field when our
library was built without that above configure option.

Since the man page documents such fields this approach
is far superior to that old (confusing) error message:
. error: unknown user-defined format specifier "slice"

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-06-07 20:49:30 +10:00
Shivkrishna A
3a52dfa340 Fix for Bug:1174313 2016-03-02 22:35:55 +05:30
Laurent Bigonville
5da390422d ps: use attr/current as fallback for context
If SELINUX is enabled but the machine is using another MAC system
(like apparmor), ps will fallback to just parsing
"/proc/%d/attr/current", otherwise the label/context would not
be properly displayed in that case.

References:
 https://bugs.debian.org/786956

Signed-off-by: Craig Small <csmall@enc.com.au>
2016-01-03 18:13:47 +11:00
Craig Small
b2f49b105d Closes: #9 ps: Remove Unix98 output limitations
ps previously followed the Unix98 standard when it comes to
user-defined output, sometimes. This meant you could have
user output format with a header that included commas and
equals signs. It was dependent on if ps thought you wanted
sysv or bsd format and THAT was dependent on things in previous
options.

It was very confusing to a user because
 ps p $$ -o pid=,comm=
gave you a two-column output but
 ps -p $$ -o pid=,comm=
would give you a one column output with the header ",comm="

The -p versus p means (to ps) you want sysv or bsd parsing.
Unix98 standard or not, this is plainly just silly.

The commit removes any of the quirks Unix98 has with user defined
output.  If you really wanted a ps header with commas in the output,
today isn't your day.

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-10-26 11:18:52 +11:00
Craig Small
0ee090ae16 ps: display control group name
The cgroup field while shown as a vector is a concatenated
string, so alot of the complexity of sorting and displaying
has gone.

This change simplifies the cgroup sorting and adds display
and sorting for the name attribute of the cgroup, if found.

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-15 17:10:38 +10:00
Craig Small
4bd0e539af ps: sort by cgroup
A rather small fix to sort by cgroup. This sorting function
could be used for other string vector entries, but I can't
see why you want to for, say, environment.

Reference:
 https://bugs.debian.org/692279

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-15 16:23:37 +10:00
Craig Small
313f936739 ps: enable sort by etimes
ps has two columns showing the same data which is elapsed time, just
the format is changed:
 etimes - elapsed time in seconds
 etime  - elapsed time in DD-hh:mm:ss

ps used to only sort by etime but not etimes, by making etimes
and alias of etime for sorting both flags work.

References:
 https://bugs.debian.org/794619

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-06 22:08:13 +10:00
Craig Small
56d9d5e7e7 library: Change linux version
Added function procps_linux_version() which used to be an
exported integer instead.  Also changed the method of obtaining
the linux version (more correctly the os release) to use a specific
procfs entry. This works for both Linux and FreeBSD.
2015-06-19 21:00:46 +10:00
Jim Warner
3600f652e8 documentation: fix man pages due to refactor for wchan
This patch will bring three of our man pages into line
with the recent refactor of the libprocps wchan logic.

[ and also eliminates more damn eol whitespace which ]
[ snuck in our repo with the commit referenced below ]

Reference(s):
http://www.freelists.org/post/procps/WCHAN,11
commit cf4788c28d

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-19 19:09:21 +10:00
Jim Warner
caeebdc71f ps: exploit the simplified library interface for wchan
This patch was made necessary by those library changes
in support of recently revised/simplified wchan logic.

In addition, this commit eliminates a broken alternate
'namelist' provision which was intended to allow users
to specify a System.map file to be used in translating
addresses into function names. But, the real effect of
the now defunct 'N' and '-n' options was to indirectly
force addresses (not names) to be displayed since such
user named map files could not be successfully parsed.

Besides when the required FRAME_POINTER kconfig option
is absent there is no address to translate and when it
is present /proc/PID/wchan is already translated. Thus
an alternate mapping is unnecessary and inappropriate.

[ we'll forgive POSIX for documenting '-n  namelist' ]

Reference(s):
http://www.freelists.org/post/procps/WCHAN,11

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-19 19:09:20 +10:00
Craig Small
505f257a8c library: remove procps_version functions
It doesn't make any sense to have the binary version strings
embedded into the library. The version strings are defined
already either in the Makefile or in include/c.h
2015-06-18 22:37:24 +10:00
Jim Warner
6577371919 ps: update man document to support LXC container names
Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-14 15:36:06 +10:00
Jim Warner
f9e27afeb2 ps: add code to exploit the new library LXC containers
Reference(s):
https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1424253
https://bugs.launchpad.net/ubuntu/+source/procps/+bug/1424253

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-14 15:36:06 +10:00
Peggy Russell
cf4788c28d ps.1: usernames are truncated
ps now truncates usernames and doesn't change them to uids.
Man page is now updated with the correct information

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-06-13 16:54:23 +10:00
Filipe Brandenburger
c1c73c0d00 build-sys: merge automake subdirs into toplevel
This will be required for subdir-objects, otherwise automake will have
problems with more than one Makefile.am having rules to build the same
files.

Tested that it builds and both `make check` and `make distcheck` work.

Tested `make install` and compared the tree with the one installed
before this commit, both installed the binaries to the same locations.
The binaries are also in the same location in the build tree (for
instance, ps/pscommand is still there.)

Checked the binaries for the correct libraries linked into them. Binary
sizes matched before and after this change.

Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-01 23:19:31 -07:00
Filipe Brandenburger
90cc5460aa build-sys: add $(top_srcdir) to include search dir
This is required for out-of-tree build to work, since many source files
include e.g. proc/*.h which is not under the include/ directory.

Tested that `make distcheck` starts working after this patch.

Signed-off-by: Filipe Brandenburger <filbranden@google.com>
2015-05-01 17:09:55 -07:00
Michael Forney
007c438148 Also emulate error_at_line if not present 2014-08-28 13:54:24 +02:00
Jim Warner
bcbc3c5a02 misc: result after checking all files for misspellings
Reference(s):
https://github.com/lyda/misspell-check.git

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-08-08 22:14:21 +02:00
Jim Warner
93d37cf57a ps: exploit library systemd support vs. internal logic
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-17 13:31:06 +02:00
Jim Warner
d187304854 ps: clarify which options depend on systemd in man doc
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-17 13:31:06 +02:00
Jaromir Capik
e751606fcc ps: add -q/q/--quick-pid option
This commit introduces a new option q/-q/--quick-pid
to the 'ps' command. The option does a similar job
to the p/-p/--pid option (i.e. selection of PIDs
listed in the comma separated list that follows
the option), but the new option is optimized
for speed.
In cases where users only need to specify a list
of PIDs to be shown and don't need other selection
options, forest type output and sorting options,
the new option is recommended as it decreases
the initial processing delay by avoiding reading
the necessary information from all the processes
running on the system and by simplifying
the internal filtering logic.
2014-07-10 21:24:19 +02:00
Jaromir Capik
411d218793 docs: distinguish between T/t in the ps.1 manual 2014-07-02 16:23:30 +02:00
Jim Warner
9e4986f4ea ps: correct some man document deficiencies/aberrations
. a 'space' misinterpreted as the continuation request
. continuation character, resulting in a concatenation
. 2 missing fields inadvertently omitted from man page

Reference(s):
. bug report regarding missing fields
https://bugs.launchpad.net/ubuntu/+source/procps/+bug/115016

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-05-28 06:53:19 +10:00
Jim Warner
ada443268e misc: fix man doc spelling and grammar for translation
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 20:56:48 +02:00
Yuri Chornoivan
2ec9f5c22e Minor i18n fixes
Minor fixes that the translator (Yuri) has found in some of the
strings. You only know how many typos and thinkos you have when
someone is trying to translate it.

Signed-off-by: Craig Small <csmall@enc.com.au>
2014-03-03 21:58:56 +11:00
Craig Small
8e7ef322e2 Update help files
Benno Schulenberg suggested some changes to the help messages
to provide some consistency and clarity for both the users and
translators of procps.

The test needed to be updated as the pmap output changed too.

Signed-off-by: Craig Small <csmall@enc.com.au>
2014-02-02 18:13:01 +11:00
Craig Small
d06aaaaf2b ps: ignore SIGCONT
SIGCONT is a continue signal.  It seems that some zsh setups can send
this signal, causing ps to abort.  This is not what "continue" means.
This change just uses the default handler which will continue a stopped
process.

References:
  http://bugs.debian.org/732410
  http://www.zsh.org/cgi-bin/mla/redirect?WORKERNUMBER=32251

Signed-off-by: Craig Small <csmall@enc.com.au>
2014-01-14 22:23:58 +11:00
Craig Small
8a38cd5eb4 Split help lines to help translators
To assist translators, the help lines are split so that each translation
chunk has one option. This gives bonus of if we add or change an option,
only that option remains untranslated rather than the entire help block.

Reference:
  http://www.freelists.org/post/procps/procpsng-for-Translation-Project,1

Signed-off-by: Craig Small <csmall@enc.com.au>
2013-12-28 09:25:39 +11:00
Lukas Nykryn
d66ed3350e ps: possibility to display slice unit for a process
Library systemd-login offers possibility to display
name of a systemd slice unit for specific pid.

This patch adds output option "slice" which will
show name of systemd slice unit.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-10-16 15:18:08 +02:00
Craig Small
dd6f24dbed Merge commit 'refs/merge-requests/13' of git://gitorious.org/procps/procps into merge-requests/13
Conflicts:
	pgrep.c
	ps/output.c
	ps/ps.1
2013-09-11 21:34:05 +10:00
Jim Warner
7c4894dd22 ps: address a potential 'newline' quirk the libselinux
Sometimes with libselinux present but SELinux inactive
the context reported is "unconfined" which contains an
embedded newline. This then causes misalignment of any
subsequent data. So, ps will now protect against that.

Reference(s):
http://www.freelists.org/post/procps/enablelibselinux-switch,14

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-08-09 17:58:52 +02:00
Jaromir Capik
5f663aee47 ps: making the libselinux support configurable
Previously the libselinux support was present
in the sources, but disabled with a preprocessor
condition (#if 0).
From now the libselinux support can be enabled with
the --enable-libselinux switch available
in the configuration script. That way is more
flexible than local patches modifying the condition
value from 0 to 1.
2013-08-07 17:52:38 +02:00
Václav Pavlín
39c6de4c87 ps: remove sd_ prefix from systemd output options
ps : This patch removes sd_ prefix from recently added systemd output options
to let them look more tied with the system.

Patch does not change behaviour of these options, only modifies their
representation to user.
2013-05-22 14:55:40 +02:00
Lukas Nykryn
7b50c2e918 ps: possibility to display seat for a process
Library systemd-login offers possibility to display
name of seat for a session on multi-seat systems.

This patch adds output option "sd_seat" which will
show name of seat or "-", when name of seat can not
be determined, but "seat0" should always exist.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Lukas Nykryn
38e8087d55 ps: possibility to display systemd user unit for a process
Library systemd-login offers possibility to display
name of systemd user unit for specific pid. Note that not all
processes are part of a user unit.

This patch adds output option "sd_uunit" which will
show name of user unit or "-", when process does not belong
to any user unit. This is similar to "sd_unit" but applies
to user units instead of system units.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Lukas Nykryn
4c1536d5f1 ps: possibility to display machine name for a process
Library systemd-login offers possibility to display
the name of the VM or container which process belongs to.

This patch adds output option "sd_machine" which will
show machine name or "-" when the name can not be determined.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Lukas Nykryn
785776c10d ps: possibility to display uid of session owner for a process
Library systemd-login offers possibility to display the Unix
user identifier of the owner of the session of a process.
This information will also be displayed for user processes which
are shared between multiple login sessions of the same user,
where sd_session will be blank.

This patch adds output option "sd_ouid" which will show
user UID or "-", when there is no owner for a process.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Lukas Nykryn
716d96b8eb ps: possibility to display login session for a process
Library systemd-login offers possibility to display name
of login session for specific pid.
Note that not all processes are part of a login session
(e.g. system service processes, user processes that are shared
between multiple sessions of the same user, or kernel threads).

This patch adds output option "sd_session" which will
show name of session or "-", when process does not belong
to any session.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Lukas Nykryn
7ab5d33c5c ps: possibility to display systemd unit for a process
Library systemd-login offers possibility to display
name of a systemd unit file for specific pid. Note that
not all processes are part of a system unit/service
(e.g. user processes, or kernel threads).

This patch adds output option "sd_unit" which will
show name of systemd unit or "-", when process does not
belong to any unit.

To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
2013-04-24 09:24:44 +02:00
Aristeu Rozanski
a01ee3c0b3 procps: add support for linux namespaces
Each process in Linux has a /proc/<pid>/ns directory which contains
symbolic links to pipes that identify which namespaces that process
belongs to. This patch adds support for ps to display that information
optionally.

Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
2013-04-16 15:05:21 -04:00
Craig Small
c03aa80ad1 Fixed warning about error_at_line
ps/display.c:65:7: warning: implicit declaration of function
‘error_at_line’ [-Wimplicit-function-declaration]

Applied Gentoo patch created by ssuominen

References:
  http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/sys-process/procps/files/procps-3.3.6-error_at_line.patch?annotate=1.1&diff_format=f
  http://www.freelists.org/post/procps/procpsng-337,17

Signed-off-by: Craig Small <csmall@enc.com.au>
2013-03-26 21:27:38 +11:00
Jim Warner
fe75e26ab6 miscellaneous: clean up trailing whitespace throughout
The entire tree's polluted with inappropriate trailing
whitespace. This commit rids our environment of all of
those useless keystrokes. Unfortunately, it sure ain't
a permanent solution and requires every contributor to
instruct their editor(s) to prevent or eliminate them.

Plus it's strongly recommended we all insert something
like what's shown below to our '.gitconfig' file so as
to provide at least some warnings when we try to apply
any patches (git am) that do contain the #@!%& things!

References(s):
~/.gitconfig excerpt ---------------------------------
[core]
  whitespace = trailing-space, space-before-tab, blank-at-eof
[apply]
  whitespace = warn
--------------------------------- ~/.gitconfig excerpt

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-03-14 12:36:47 +01:00
Craig Small
eae3efd2b5 Merge commit 'refs/merge-requests/6' of git://gitorious.org/procps/procps into merge-requests/6 2013-01-24 21:51:13 +11:00
Andreas Bießmann
15030a87a6 ps.1: fix --group description
The --group switch tells about parameter 'grplist' but detailed description
names it 'grouplist'.
This patch changes 'grouplist' to 'grplist'.

Signed-off-by: Andreas Bießmann <andreas@biessmann.de>
Signed-off-by: Craig Small <csmall@enc.com.au>
2013-01-24 21:33:24 +11:00