When autogroups are active programs such as renice and
nice are basically useless because the nice value will
only affect the target task priority relative to other
processes in the same autogroup. So to accomplish what
we thought of as renice, /proc/<pid>/autogroup must be
changed. Altering a single member in an autogroup will
also affect every other member of that same autogroup.
Since top's renice provision ('r') suffers constraints
like those of the stand alone nice/renice programs, we
will now provide a means to manipulate that nice value
found within some process' /proc/<pid>/autogroup file.
[ to alter this file for other user's tasks requires ]
[ root privileges, as does setting a negative value. ]
[ however, unlike that 'r' command, this new command ]
[ allows raising *and* lowering all positive values. ]
Reference(s):
. Aug 2021, autogroups added to librady
commit 631e5d91f3
. Aug 2021, autogroups added to top
commit b789b46f84
Signed-off-by: Jim Warner <james.warner@comcast.net>
On occasion, even as the top author, I wonder why that
'x' toggle has stopped working. Of course, it actually
was working but a locate request ('L') or other filter
('O') operation was active and thus temporarily turned
if off. Such behavior is documented in top's man page.
Well, with this patch that 'x' suppression is no more.
[ the original justification, however, remains true. ]
[ but there's really only one character which causes ]
[ any potential trouble & i'm gonna' keep it secret. ]
[ besides, if a display is corrupted, there's always ]
[ that '=' key which restores things back to normal. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
It would appear that openSUSE was the first to release
procps-ng version 4.0.0 (in the tumbleweed distro). As
a result I checked their source rpm and found a couple
of patches I'm porting to newlib for the next release.
This particulate commit was a refactor of the openSUSE
patch 'procps-ng-3.3.8-bnc634840.patch'. Unfortunately
their original patch did not have the intended effect.
That was because the amended signal handling logic was
performed well before the command line parameters were
parsed. So the global 'Batch' flag was in its 0 state.
. what follows is the original openSUSE commit message
------------------------------------------------------
Do not setup SIGHUP signal handler if we are in the batch mode
Top enables a signal handler for the SIGHUP signal (loss of terminal). While
this makes sense for top's default interactive mode, it doesn't make any sense
for batch mode. If you run top in nohup just to collect data over time and
disconnect top finishes which is not what one would expect.
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
When we transitioned from 'char' based fields to 'int'
proper initial cursor positioning (highlight) was lost
in the 'fields_utility' function. The highlight should
appear on the current sort field. Instead, however, it
was often positioned on the first field listed or some
completely different field other than that sort field.
So this patch will restore the master branch behavior.
[ and on the assumption that a sort field is visible ]
[ we will search first for a field with the 'on' bit ]
Reference(s):
. Mar, 2022 - trade 'char' for 'int'
commit 46aa96e438
Signed-off-by: Jim Warner <james.warner@comcast.net>
When the configuration file is first written, there is
just the normal single newline which ends that rcfile.
However, when any existing rcfile was rewritten, there
was one extra newline '\n' character added at the end.
This will happen just once. The file does NOT continue
to grow with the extra blank lines always being added.
Anyway, this patch will put an end to such a practice.
[ along the way i fixed an unrelated whitespace oops ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This new integer based version of 'fieldscur' deviated
a bit too much from that character based logic when it
comes to ancient 3.2.8 rcfile support. This results in
an inappropriate extra field shown as the last column.
If we're truly dealing with 20 year old 3.2.8 rcfiles,
it's important the 3.3.9 extension (RCF_PLUS_H) not be
concatenated to what was read. That's because a search
for the special SUSE characters will always find a '\'
in the 26th position (after normal 3.2.8 'fieldscur').
[ for symmetry, we'll also avoid RCF_PLUS_J (3.3.17) ]
All other 'old' rcfiles are transformed without error.
Reference(s):
. Mar, 2022 - 3.2.8 support restores
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will restore the previously abandoned older
rcfile support. To be honest, I wasn't sure this would
be possible given the vast difference between formats.
But after some very intense hacking our newlib top can
again fully support seamless migration from some older
'char' based file to this new 'int' based file format.
[ top even supports a 20+ year old 3.2.8 config file ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
As I speculated in a prior commit, this patch will now
demonstrate how simple it is to extend the upper limit
of supportable fields. With these changes we'll now go
from facing the old limit of 86 to a new limit of 100.
No other changes are needed nor is any logic impacted.
Signed-off-by: Jim Warner <james.warner@comcast.net>
With each of those references shown below, the maximum
number of fields was increased. However, with a 'char'
based implementation we're nearing the upper limits of
total displayable fields. We currently use 76 of a max
of 86 fields. With extra effort, 94 might be possible.
But 94 is the absolute upper limit of possible fields!
Moreover, the current implementation yields characters
that were unprintable in the rcfile. This could become
an issue with that 'inspect' feature when/if an rcfile
is edited to add entries (as opposed to using 'echo').
So, with this commit the internals of field management
has been completely reimagined. It is now based on the
integer type, not a character. And whereas that former
design used the high order bit to show the 'on' state,
thus yielding an unprintable character, the new design
uses the low order bit for the state. As such, numbers
will be kept small and an even number will be an 'off'
field whereas an odd number will become an 'on' state.
The bottom line is that this new design will afford an
unlimited number of new fields while keeping an rcfile
completely free of that potential unprintable garbage.
And it is embarrassingly easy to extend the maximum of
supportable fields from the currently implemented 100.
Who knows, maybe a future patch will prove this point.
[ unless a subsequent commit proves otherwise, given ]
[ the dramatic differences in rcfile contents, i had ]
[ to abandon the practice of supporting old rcfiles. ]
Reference(s):
. Nov, 2013 - RCF_PLUS_H introduced
commit af4e6533ba
. Jul, 2016 - RCF_PLUS_J introduced
commit d5c5051fb3
Signed-off-by: Jim Warner <james.warner@comcast.net>
This warning was added after discovering openSUSE uses
the option with (at least) their 'tumbleweed' version.
The man document sections impacted are: 4e, 5d and 5e.
That is where it was asserted sort column highlighting
would be temporarily turned off if search ('L') and/or
filtering ('O') is active. This option makes it false.
[ shame on suse for not also correcting the man page ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just compliments a change referenced below
by providing the value which includes reaped children.
Reference(s):
. Feb, 2022 - added %CUU field
commit 7647e96b0a
Signed-off-by: Jim Warner <james.warner@comcast.net>
That normalization of the 'scale_tics' function in the
prior commit convinced me that I won't please everyone
with my arbitrary choices for the scaling transitions.
So, this patch will provide the users with a means for
setting their own scaling transition points with a new
toggle. Ctrl-E was chosen since the 'e/E' toggles were
already present as a means of scaling (albeit memory).
[ this toggle will also serve an educational purpose ]
[ by allowing one to see all the scaling conventions ]
The scaling a user establishes is saved in the rcfile.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch refactors the 'scale_tics' function to more
closely parallel uptime shown on the first line of the
summary area. The old logic has been preserved through
the header file's new #define SCALE_FORMER provision.
However, the former logic was actually a big disaster.
These are some potential problems with that old logic:
1. With respect to our time fields top no longer deals
solely with cpu time. So, the old limits of '68 weeks'
could possibly be insufficient to reflect those times.
2. Given the widths of top's new time fields, the code
never got beyond scaling to hours. For example, with a
ridiculously large span of 19 years, the scaled result
would then be shown as '167832h'. We never reached the
days ('6993d') or even the weeks ('999w') equivalents.
3. Similarly, with that 'TIME+' field and a large tics
value, results would then appear as 'MMMMMM:SS' rather
than the more meaningful 'HH:MM:SS' or days and hours.
So henceforth we will adopt these scaling conventions:
MMM:SS.hh ... minutes:seconds.hundredths
MMM:SS ...... minutes:seconds
HH,MM ....... hours,minutes
D+H ......... days+hours (with 'd' & 'h' suffixes)
D ........... days (with 'd' suffix)
W+D ......... weeks+days (with 'w' & 'd' suffixes)
W ........... weeks (with 'w' suffix)
Note that, unlike our former scaling logic, that 'MMM'
portion won't be allowed to grow unconditionally. It's
limited (arbitrarily?) to 360 total minutes (6 hours).
Additionally, the 'HH' guy will be limited to 96 hours
(4 days) while that 'D' limit was set at 14 (2 weeks).
Whenever a limit is hit, scaling will advance a level.
Reference(s):
. Feb, 2022 - added 'ELAPSED'
commit 9348d3b008
. Feb, 2022 - added 'STARTED'
commit 7647e96b0a
Signed-off-by: Jim Warner <james.warner@comcast.net>
When the 'STARTED' field was added, in the message for
the commit referenced below, I explained why 'ELAPSED'
shouldn't be implemented though it might be preferred.
Well, after climbing out of my box to do a little more
thinking, I came up with the way to add that 'ELAPSED'
field while avoiding the possible performance penalty.
Just do not show what would change with every refresh!
If we do not show the seconds portion of a scaled tics
amount then the problem goes away. And this comes with
an additional benefit. The HH,MM (hours,minutes) style
then is readily compared with that system uptime shown
as HH:MM. The only difference is just the comma/colon.
[ assuming the top uptime/load average toggle was on ]
Reference(s):
. introduced 'start time' field
commit 7647e96b0a
Signed-off-by: Jim Warner <james.warner@comcast.net>
When the 'STARTED' field was added, the width was made
the same as the 'TIME+' field. Thus, a full time could
be shown (which then included hundredths of a second).
That kind of granularity is totally unnecessary. After
all, this column is potentially confusing enough since
it is so counterintuitive. So, this commit will reduce
the width of the field with some help from scale_tics.
Henceforth it will not include those ol' centiseconds.
[ along the way let's expand the man document with a ]
[ a remainder about content representation & scaling ]
Reference(s):
. introduced 'start time' field
commit 7647e96b0a
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will exploit some new library capabilities.
[ one will raise eyebrows, the other likely will not ]
A new 'STARTED' field was added which shows the time a
process started after system boot. As such the largest
interval represents the most recently started process.
This is the field that will likely be questioned since
it's somewhat counterintuitive. But were we to instead
use TIME_ELAPSED, the value will change with every top
refresh. This will defeat any PUFF macro optimization.
The new '%CUU' field will probably be better received.
It represents the cpu usage over the life of the task.
When a process was showing high %CPU usage, this field
can be used to determine if it's an anomaly or normal.
[ and as with %CPU, %CUU shows a '?' when running in ]
[ a namespace when /proc was mounted with subset=pid ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch was prompted by the merge request for pgrep
referenced below. In top's case, any performance gains
will be minimal since the now defunct strncpy was only
employed for termcap rebuilds after interacting with a
user (+ 1 other non-termcap related user interaction).
[ golly, strncpy always calls at least two functions ]
[ but usually calls a total of 3. on the other hand, ]
[ memccpy will only call a maximum of two functions. ]
And thanks to Baruch Siach for these strncpy insights.
Reference(s):
https://gitlab.com/procps-ng/procps/-/merge_requests/148
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch eliminates those warnings referenced below.
They are sometimes associated with an obscure #define.
We'll also corrrect one header file function prototype
so it will aggree with the actual function definition.
Reference(s):
top.c: In function 'adj_geometry':
top.c:1874:20: warning: comparison of integer expressions of different signedness: 'int' and 'long unsigned int' [-Wsign-compare]
1874 | if (Screen_cols < DOUBLE_limit) Curwin->rc.double_up = 0;
| ^
top.c: In function 'zap_fieldstab':
top.c:2359:26: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare]
2359 | if (wtab[EU_CPN].wmin < digits) {
| ^
top.c:2365:26: warning: comparison of integer expressions of different signedness: 'int' and 'unsigned int' [-Wsign-compare]
2365 | if (wtab[EU_NMA].wmin < digits) {
| ^
top.c: In function 'keys_summary':
top.c:5128:45: warning: comparison of integer expressions of different signedness: 'int' and 'long unsigned int' [-Wsign-compare]
5128 | if (w->rc.double_up && Screen_cols < DOUBLE_limit) {
| ^
top.c: In function 'sum_tics':
top.c:5605:22: warning: unused variable 'num_syst' [-Wunused-variable]
5605 | int ix, num_user, num_syst;
| ^~~~~~~~
top.c:5605:12: warning: unused variable 'num_user' [-Wunused-variable]
5605 | int ix, num_user, num_syst;
| ^~~~~~~~
Signed-off-by: Jim Warner <james.warner@comcast.net>
When in forest view mode, that focus toggle ('F') is a
useful tool occasionally. But, if a focused parent has
enough cloned siblings to exceed screen rows, it could
be hard to remember that such a toggle remains active.
So, this patch will provide a subtle visual clue added
to the leftmost position in the COMMAND column. Now if
the focus toggle was active, regardless of total tasks
affected, the users will always know when it's active.
Reference(s):
. -7/24/21, introduced new focus toggle
commit 3e922e671d
. 09/23/21, ensure focused tasks stay focused
commit 69978e3650
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the commit referenced below, I fixed what I thought
was all the top 'truncation' warnings. For that commit
I had been using CFLAGS='-ggdb -Wall'. However, if one
uses just a vanilla './configure', then a hidden extra
warning will surface. This patch will finally kill it.
[ thanks a bunch gcc - we love this kind of behavior ]
Reference(s):
. 01/08/22, original warning fix
commit 44ca06f1a0
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ you wouldn't believe how many back-and-forths were ]
[ involved in Craig convincing me there were several ]
[ inconsistencies. i am so dense sometimes (often?). ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Over the years the summary_show function has increased
from around 77 lines of code & comments to its current
size of 243 lines. This is well beyond an ideal length
of available screen rows. So this patch will split it.
We'll take the cpu and memory duties and make separate
functions out of them. Of course, this will incur some
additional call overhead but, given current cpu/memory
logic, any such increase really becomes insignificant.
Now summary_show's a svelte 57 lines of code/comments.
[ this is like what was done to that do_key function ]
[ a decade ago except overhead of new function calls ]
[ plus table lookup was even less of a concern since ]
[ a human was involved, not normal iterative output. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the patch referenced below the focus task logic was
improved to ensure that newly cloned tasks 'above' the
focused task did not force an effect like the up arrow
key. That commit also acknowledged that when some task
'above' ended, it *would* act like the down arrow key.
Well, with this commit a task ending 'above' a focused
task no longer distorts the focus. That's assuming the
new '#define FOCUS_HARD_Y' is specified plus the total
focused tasks does not exceed the current screen rows.
Thus, the manual scrolling with up and down arrow keys
is allowed when the total focused exceeds screen rows.
[ but keep in mind that when a focused task has been ]
[ hardened some otherwise useful toggles will not be ]
[ available. keystrokes like 'v' and even 'F' itself ]
[ can not be applied to another task with no scroll. ]
Reference(s):
. Sep, 2021 - 'focus' logic improved
commit 69978e3650
Signed-off-by: Jim Warner <james.warner@comcast.net>
This just updates the copyright dates in the documents
where I was already represented. Others are unchanged.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Rather than having those 3 separate background threads
enabled by default, we'll turn them off until somebody
chooses to activate them. That seems more appropriate.
Signed-off-by: Jim Warner <james.warner@comcast.net>
After the stage had been set in the previous patch, in
this patch we will actually implement those background
updates via 3 separate threads. The design was simple:
. the do-while loops have now been made truly infinite
. 2 semaphores per thread allow needed synchronization
. 1 semaphore will provide for each thread to sem_wait
. 1 semaphore will provide for display o/p to sem_wait
. and all 3 thread's program name was made descriptive
A complication was the potential for a signal directed
to one of our new threads. Rather than having a thread
try to deal with such signals, we pass a mask with all
signals blocked at pthread_create time. Thereafter any
subsequent signals are forwarded to the parent thread.
[ also sigprocmask was exchanged for pthread_sigmask ]
[ since warned about use "in multithreaded process". ]
[ plus we also modified each of those POSIX comments ]
[ about 2004 to agree with current signal-safety(7). ]
Sadly, after all this effort there were no performance
benefits to having separate threads. In fact there was
a measurable performance degradation when running with
ever smaller delay intervals. But even with a delay of
1/10 second the 'real' cost increase is only about 1%.
There is one way whereby any additional costs might be
eliminated (at least seemingly). One could introduce 2
separate sets of contexts for each of those 3 threads.
Then retrieval & display could be overlapped. However,
the resulting display wouldn't represent the real-time
results. Rather it would be stale by 1 delay interval.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit sets the stage for turning three functions
into code that can support a separate thread to update
their respective data while working in the background.
It involved relocating 1 function, renaming 2 routines
and adding parameters plus return addresses to each of
three functions. Those latter changes will be required
when issuing 'pthread_create' calls in the next patch.
The final step was organizing this code into what will
become the infinite do-while loop supporting a thread.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit is an example of what can happen when this
author is waiting around for the release of our newlib
& otherwise runs out of legitimate changes to be made.
[ on the other hand, such changes surely make us run ]
[ quite a bit more efficiently, if i am not mistaken ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
For quite some time now, top has stood out like a sore
thumb regarding the approach to cmdline options & help
text. Only short options were used and that same help
text was displayed for '-h' (help) plus 'v' (version).
[ also, top 'rolled his own' when it came to parsing ]
[ options while avoiding that getopt implementation. ]
Well, with this commit all of that has changed and top
now has added a long form of his options. Additionally
he employs getopt_long() for the bulk of that parsing.
[ however, top will still avoid separate fputs calls ]
[ characteristic of other procps-ng programs when it ]
[ comes to help. rather all such text is one string. ]
Along the way, the following major getopt deficiencies
were addressed, assuming the absence of a new #define:
* an equals sign ('=') is allowed on both option forms
* whitespace is allowed before & after the equals sign
* optional arguments needn't abut their related option
for short form nor is an '=' required with either form
Signed-off-by: Jim Warner <james.warner@comcast.net>
Ordinarily, whenever a new field is added to top, that
RCF_VERSION_ID should be bumped which then prevents an
older version of top from reading the expanded rcfile.
With this change, however, we'll keep the existing 'k'
version since we've yet to release the newlib version.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The commit shown below introduced two abreast printing
for %Cpu statistics. But, the Memory & Swap lines have
always been printed on separate lines when '4' was on.
With this commit, those lines will now be treated just
like %Cpu stats, either separate lines or two abreast.
Reference(s):
. May 2020, added '4' toggle for 2 abreast
commit 59f5a37a24
Signed-off-by: Jim Warner <james.warner@comcast.net>
When the '4' toggle is on, and Summary Area %Cpu lines
are shown two abreast, it's not always clear where the
separation is between the two processors. So with this
patch we'll now print a vertical bar separator between
them (looking similar to the existing field headings).
We will also reduce that 'GRAPH_suffix' constant to 1,
reflecting the the trailing ']' bracket only, so as to
maximize top's exploitation of available screen width.
[ plus a superfluous double '+ +' has now been fixed ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
As promised, this commit will ensure that TREE_FOCUS_X
impacts only the window under which an 'F' was issued.
Previously, when 'F' was invoked it would impact every
window that was displaying forest view. Now, only that
window where 'F' was applied will show the indentation
losses whenever multiple windows were being displayed.
[ each of the 4 windows can now have different focus ]
[ pids active and not impact any other forest views! ]
Reference(s):
. 'TREE_FOCUS_X' introduction
commit c23d2708d4
Signed-off-by: Jim Warner <james.warner@comcast.net>
For every function whose parameters consist of a WIN_t
pointer and a pointer to a pids_stack, we will instead
pass the WIN_t pointer and index to that window's ppt.
This change will save six instructions per invocation,
and converts the index once in those called functions.
[ you can consider this an efficiency change, but it ]
[ is really being implemented so that 'TREE_FOCUS_X' ]
[ #define can be made to behave as one should expect ]
[ when running under top's 'alternate display' mode! ]
[ stay tuned for the very next commit to be pushed!! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Just to see if I could, the new #define will force the
indentation of a parent task to be reset to zero while
maintaining the proper child indentation relationship.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Sometimes, it might be useful to isolate a parent task
and its forked children from other system activity. As
an example, a user might want to examine workload in a
specific lxc container. Or maybe there is some need to
question what's happening under the same tmux session.
Since forest view mode tends to be a relatively stable
display, it will sometimes satisfy the above need. But
that mode can't currently guarantee the target process
always remains as the topmost task or even is visible.
So, this patch will enable focusing on any parent task
and keeping it as the topmost process while displaying
it and its forked children only. It then appears as if
there is no other activity in that system by virtue of
the blank lines which follow that final child process.
To implement this new feature, top's redundant 'F' key
has been repurposed. It made little sense devoting two
keys to the Fields Management screen (especially since
the key we've taken required two separate keystrokes).
[ and while we're at it, i also added punctuation to ]
[ the prologue for that renamed 'forest_display' guy ]
[ since all other forest functions used punctuation. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This new #define will produce top results identical to
the results achieved for './configure --disable-numa'.
However it keeps the change entirely local to our top.
[ it has been introduced to test the following patch ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Some time ago, IO accounting was added for the library
and exploited by the ps program. This patch just plays
a little catch-up & adds similar functionality to top.
[ and we also finally get around to incrementing the ]
[ rcfile id which should have already been done when ]
[ the smaps fields were added or, at least, with USS ]
Reference(s):
. added IO accounting to ps program
commit 8baf8eeab4
. added IO accounting to library
commit a7afe06e6f
Signed-off-by: Jim Warner <james.warner@comcast.net>
We're just following the ps program's lead introducing
a new 'USS' field to represent the non-swapped portion
of physical memory ('RSS') not shared by another task.
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the patch referenced below, 2 potential abends were
fixed both of which involved 'alternate display mode'.
The root cause of those abends was a negative value in
the 'begnext' field for other than the current window.
And while that potential is fixed for now the existing
code almost invites such problems again in the future.
So, this patch will remove any temptation to name some
other window in the 'mkVIZrow1' macro. And, since that
macro is not the only source of 'begnext' changes, the
'mkVizrowX' is being added to identify such occasions.
[ and for symmetry i've added a 'mkVIZyes' macro and ]
[ ameliorated an otherwise surreptitious assignment! ]
Reference(s):
commit 8281ac4f98
Signed-off-by: Jim Warner <james.warner@comcast.net>
My, how time flies. Here we are finally attending to a
2 year old issue at long last (well, at least top is).
In truth, this change was prompted by that more recent
issue #201 and simply represents my initial picks from
among those available with the new library provisions.
Note: we have to bump that rcfile version whenever new
fields are added. That will mean older top programs no
longer can read this top's rcfile. But that's Ok since
top offers a warning before replacing an older rcfile.
Doubtless, more smaps_rollup fields will be introduced
under top as we get more experience with this feature.
However, any such usage comes with tremendoud costs as
was reported for the previous patch and repeated here:
Here is a small preview of just what you will discover
when using this command line: time top/top -d0 -n1000.
------------------------------------ as a regular user
with only PID + RES (statm)
real 0m2.605s
user 0m1.060s
sys 0m1.377s
with only PID + RSS (smaps)
real 0m26.397s 10x more costly
user 0m1.253s
sys 0m24.915s
----------------- as a root (thus smaps for all tasks)
with only PID + RES (statm)
real 0m2.651s
user 0m1.177s
sys 0m1.286s
with only PID + RSS (smaps)
real 0m33.040s 12x more costly
user 0m1.256s
sys 0m31.533s
Reference(s):
. top/ps: add support for PSS reporting
https://gitlab.com/procps-ng/procps/-/issues/112
. ps: expose shared/private memory separately
https://gitlab.com/procps-ng/procps/-/issues/201
Signed-off-by: Jim Warner <james.warner@comcast.net>
With that commit referenced below, which preserved the
'4' and + '!' toggles in the rcfile, this VER_J_RCFILE
macro was made superfluous. But, it was never removed.
Reference(s):
commit b46af6d213
Signed-off-by: Jim Warner <james.warner@comcast.net>
While experimenting with a new feature, wherein select
fields display the total upon request, the capacity of
the 'num' passed to some 'scale' guys became an issue.
So this commit will, with the compiler's help, put the
responsibility for converting the integer into a float
within the calling code (instead of the called logic).
Signed-off-by: Jim Warner <james.warner@comcast.net>
The Inspection feature already offered an INSP_SLIDE_1
provision. This patch now offers similar extensions to
variable width column scrolling (assuming SCROLLVAR_NO
isn't defined). Such a provision was useful during the
development of some recent library UTF-8 enhancements.
Signed-off-by: Jim Warner <james.warner@comcast.net>
All of these changes are self-explanatory, so I'll not
provide any more comments thus avoiding further shame.
[ everything's perfectly justified and right margins ]
[ are filled entirely, but of course it must be luck ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
