This avoids situations where longer regex which matches short-named proc
is used. Test for pgrep updated.
This is the newlib update of 5d12be1b7e8cc690a4d8778754aae5db4c07db2b
Signed-off-by: Craig Small <csmall@enc.com.au>
Add a warning if you specify a command over 15 characters and don't
use the -f command.
This is a pick of two patches from master:
24fd260 pgrep: Fix off by one error in line check
4a7f9fc pgrep - adds warning that pattern exceeds 15 chars without
References:
!25
kill -l SIGHUP (or any other signal-name prefixed with "SIG")
would cause free() to be called with a bad pointer instead of
a pointer to what was allocated. Fix this and add test-case.
Previous commit fixed pkill for trailing garbage on pkill
signal when it was an integer. This check now ensures that
pkill complains about it.
References:
commit a3975a9c60
On some setups the signals count can change and be truncated. You
will notice this because the number will have "<" prepended. The
testsuite didn't handle this.
You could either get:
BLOCKED BLOCKED BLOCKED CAUGHT
CAUGHT CATCHED
0000000000000000 0000000000000000 0000000000000000 00000001f3d1fef9 00000001f3d1fef9 00000001f3d1fef9
or
BLOCKED BLOCKED BLOCKED CAUGHT CAUGHT CATCHED
00000000 00000000 00000000 <f3d1fef9 <f3d1fef9 <f3d1fef9
testsuite would fail if /proc/vmstat was unreadable.
Issue #3 brought up by Mike Frysinger.
test script explicitly checks to see if it is readable and
sets these tests to unsupported if not.
For the test suite, procps used to use sleep which would just
create a process or two to test the tools against. Some setups
coreutils creates all programs including sleep into one blob which
means a lot of the tests fail, see issue #2
procps has its own sleep program now.
Before this commit, the test checking `vmstat -m` (slabinfo) output uses
a fairly strict regular expression that only allows alphanumeric
characters and a few exceptions such as "_", "-", "(" and ")".
However, recent kernels use a wider range of characters, such as ">".
For instance, see this Linux commit which creates a "page->ptl" slab:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/mm/memory.c?id=b35f1819acd9243a3ff7ad25b1fa8bd6bfe80fb2#n4283
Other patches for reporting slab usage per memcg include the names of
the cgroup in the slabinfo output, which can include additional
characters and use dots for abbreviation.
The check should not be so string, instead it could simply look for a
chain of non-whitespace characters and that should be enough.
Tested that `make check` is still working, including in some of the
environments where features that enable the additional slabinfo names.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Craig Small <csmall@enc.com.au>
The current regexp checks for a \s+ in the beginning, however that will
only match if there is a \n in the `ps` output before test-schedbatch,
but that will not happen if test-schedbatch is the first process in the
list, which happens if the PID of test-schedbatch is low enough to bring
it up in the sorted list.
Fix it by enabling newline-sensitive matching with (?n) which then
allows using ^ and $ anchors in the regexp (including an optional \r
introduced by expect.) Matching the end of line also improves checking
that the last field matches 18 exactly and not something like 181, etc.
Tested that `make check` does not break and also fixed the flakiness
seen in an environment with few processes running under the test user
which made the issue more frequent.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Craig Small <csmall@enc.com.au>
Right now the test case is both testing it (expect_pass "$test") and
marking it as untested (untested "$test"), it should do either one or
the other, so stop marking it as untested.
Before this change, these lines appear in testsuite/ps.log or the output
of `make check RUNTESTFLAGS="--all"`:
PASS: ps SCHED_BATCH scheduler
UNTESTED: ps SCHED_BATCH scheduler
Note that the second line is confusing, it's implying that the test is
untested, right after having tested it and indicated it passes.
After this change, only the first line will appear.
Tested that both `make check` and `make distcheck` continue working with
this commit.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Signed-off-by: Craig Small <csmall@enc.com.au>
On most systems the only process with a SID=1 is init
and certainly not a test sleep. On docker systems this
test program IS on SID=1 and so our "impossible SID" becomes
possible.
The ps sched test has been disabled. There are too many
odd build farms this fails in strange ways.
Other odd build farms have no tty and so some tests check
for no tty and skip if not found.
Free always used 1024 based units but used the confusing old style
kilo,mega etc.
This change changes the names to kibi,mebi for 1024 based divisors
and kilo,mega for 1000 based divisors or IEC units.
It also checks if you try to set two units, e.g free -k -m
Petabyte and Pebibyte have been added.
If you used to use the long options such as --mega these will now
actually print megabytes (they previously printed mebibytes).
The short options are being used on the IEC units
References: https://www.gitorious.org/procps/procps/merge_requests/38
Signed-off-by: Craig Small <csmall@enc.com.au>
free got a makeover to suit the newer kernel memory management.
This commit updates the tests to follow the new output for free
Signed-off-by: Craig Small <csmall@enc.com.au>
It seems command -v also includes built-ins so checking for kill
is useless because it finds the built-in and those machines or
environments that have no /bin/kill fail at the check stage.
Oh and then TCL exec doesn't spawn a shell.
After reading way too many TCL websites, I believe this should
fix the problem. TCL quoting is... different to say the least but
it works reliably here. The script now even picked up a typo elsewhere
which was nice.
This change should stop the intermittent FTBFS bugs from the Debian
pbuilders, I hope! You'd think kill $var wouldn't be this difficult.
vmstat -p checks used to fail on systems with odd
partition tables, including some Debian buildd servers.
This change limits what sort of test partitions are used,
otherwise the test is skipped.
There probably are other valid partitions, these can be added
later, if known.
Benno Schulenberg suggested some changes to the help messages
to provide some consistency and clarity for both the users and
translators of procps.
The test needed to be updated as the pmap output changed too.
Signed-off-by: Craig Small <csmall@enc.com.au>
vmstat -d or vmstat -p would crash mysteriously under different
circumstances. The problem was eventually tracked down to /sys not
being mounted which meant is_disk() always returned false.
The partition would then be attempted to be linked to a non-existent
disk causing a segfault.
vmstat will now not link to a disk if none exists.
The change in testing will skip those tests when /sys/block doesn't
exist.
Many thanks to Daniel Schepler for his analysis and suggestions.
Bug-Debian: http://bugs.debian.org/736628
Some Debian pbuilders error out on some of the tests because
they cannot find kill to kill the test processes. Now if we
cannot find kill we skip those lot of tests.
Still need to work out why the S390 doesn't like test_sched
References: http://bugs.debian.org/725743
which is a separate package that may not be available and is not yet build on Linux from scratch build order.
Instead use posix command -v. command -v is a builtin working with bash-4.2, 3.0.25 or even old bash-2.05 or current debian dash
Signed-off-by: Gilles Espinasse <g.esp@free.fr>
I find more readable instead of make check to run
cd testsuite && make site.exp && DEJAGNU=global-conf.exp runtest
But in that case, kill.exp was still trying to run with
ERROR: tcl error sourcing ./kill.test/kill.exp.
ERROR: couldn't execute "/usr/src/procps-ng-3.3.7/kill": no such file or
directory
...
Simply return from test if kill is not build
Signed-off-by: Gilles Espinasse <g.esp@free.fr>
The change in pmap is necessary if it happens that the whole output of
pmap -X or -XX has been done before the second regexp is matched. Since
the matching is greedy, it is matched by the full output, so that
nothing is left for the third regexp and the test fails with
FAIL: extra extended output (footer).
Reference: http://comments.gmane.org/gmane.linux.lfs.devel/13961
Signed-off-by: Craig Small <csmall@enc.com.au>
Ever since pmap was refactored via the reference below
(and sprinkled with those damn tabs), the response for
the absence of any argument has been an error message.
This patch restores the proper behavior ('usage' text)
and updates the dejagnu 'no arguments' expect pattern.
Reference(s):
commit d50884788d
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit increases the upper limit of permitted values
in the expect_table_dsc procedure from 999,999 to 99,999,999.
The previous value was insufficient and causing the slabtop test
to fail on build systems where the number of objects exceeds
one milion.
The entire tree's polluted with inappropriate trailing
whitespace. This commit rids our environment of all of
those useless keystrokes. Unfortunately, it sure ain't
a permanent solution and requires every contributor to
instruct their editor(s) to prevent or eliminate them.
Plus it's strongly recommended we all insert something
like what's shown below to our '.gitconfig' file so as
to provide at least some warnings when we try to apply
any patches (git am) that do contain the #@!%& things!
References(s):
~/.gitconfig excerpt ---------------------------------
[core]
whitespace = trailing-space, space-before-tab, blank-at-eof
[apply]
whitespace = warn
--------------------------------- ~/.gitconfig excerpt
Signed-off-by: Jim Warner <james.warner@comcast.net>
The two extra extended pmap options were not tested previously.
We test against our known process and process 1 which we should
not be able to get data for.
Unfortunately, the tests cannot catch SEGSEGVs but they should.
Signed-off-by: Craig Small <csmall@enc.com.au>
Some checks will fail due to different locales. For example 1.2 will
become 1,2 so the match fails. Problem reported by Alfredo Esteban
with fix suggested by Mike Frysinger
When ps is not available (like it may happen in a chroot), pgrep.exp and pkill.exp tests fail.
Use just build ps instead.
Signed-off-by: Gilles Espinasse <g.esp@free.fr>
Fix the build where it seems a code fix for Linux was likely untested
on other systems.
Define SCHED_BATCH in test-schedbatch, for systems that don't have it;
the corresponding RH BZ#741090 patch used the magic value 3 in output.c
anyway.
Bug-Debian: http://bugs.debian.org/677055
-x test should have work only in sizeof(KLONG) == 8 case where 3 numbers are printed
In sizeof(KLONG) != 8, only one number and three '-' are printed, so allow '-' character
I am compiling x86 32bits userspace, so I should be in (sizeof(KLONG) != 8) case
Signed-off-by: Gilles Espinasse <g.esp@free.fr>
When the build system is a chroot with no user logged in , all w tests fail because of {1,} match rule for the userline
Allow 0 match replacing {1,} with *
Signed-off-by: Gilles Espinasse <g.esp@free.fr>
The testsuite failed on archlinux which has sleep in /usr/bin/
instead of /bin/ directory. This commit will make expect to use
$PATH to determine where sleep is.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
