Commit Graph

302 Commits

Author SHA1 Message Date
Jim Warner
5c4c239257 doc: document 'scale_tics' function for Ctrl-E scaling
[ i also tweaked that 'STARTED' narrative just a bit ]
[ since its original wording implied the value could ]
[ change, whereas it's fixed when a task is started. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2022-03-06 14:52:34 +11:00
Jim Warner
a39f2bffdc doc: updated with new 'start time' & 'cpu utilization'
Signed-off-by: Jim Warner <james.warner@comcast.net>
2022-02-27 21:27:02 +11:00
Craig Small
e5542f1fc3 free: Use wstr width and not length
The previous commit used the value from mbstowcs() to work out
the spacing required, as printf() got it completely wrong.

However, for alignment of text you don't use the string length
but the string width.

As the referenced website says:
 Use wcslen when allocating memory for wide characters, and use wcswidth to
 align text.

Which is what free does now. Chinese is still off by one but I cannot
see why this is so. It's close enough for now. If someone can work
it out, I'd love to know what the fix is.

As a side effect, #213 is fixed because we are putting the correct
number of spaces in.

French is still an issue (see #24 ) but this is because the string is
too long!

References:
 procps-ng/procps#24
 procps-ng/procps#213
 procps-ng/procps#229
 commit 9f4db0fb56
 https://www.linux.com/news/programming-wide-characters/

Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-02-01 16:46:09 +11:00
Craig Small
9f4db0fb56 free: Fix first column justification
free has for many years had a problem with translated header columns
or the first column. This is because printf("-9s", str) doesn't use
the wide length of the string but the char length meaning they are
mis-aligned.

Using the mbstowcs() function to get the wide length and then
a precision parameter to append the right number of spaces after the
number means we get what we need.

References:
 procps-ng/procps#229
 procps-ng/procps#204
 procps-ng/procps#206
 https://bugs.debian.org/1001689

Signed-off-by: Craig Small <csmall@dropbear.xyz>
2022-01-31 18:14:12 +11:00
Jim Warner
50a0d9a56c NEWS: updated to acknowledge 'LIBPROC_HIDE_KERNEL' var
Signed-off-by: Jim Warner <james.warner@comcast.net>
2022-01-31 18:10:48 +11:00
Craig Small
4cfb0fb763 pgrep: Match on cgroup v2 paths
You can match or filter on cgroup paths. Currently the match is only
done for version 2 cgroups because these are way simpler as they have
a unified name and always start with "0::".

cgroup v1 can have:
 named groups "1:name=myspecialname:"
 controllers "9:blkio:"
 multiple controllers! "4:cpu,cpuacct:"

So they are very much more complicated from a options parsing and
cgroup matching point of view.

In addition, both my Debian bookworm and bullseye systems use
v2 cgroups.

$ ./pgrep --cgroup /system.slice/cron.service
760

Signed-off-by: Craig Small <csmall@dropbear.xyz>
2021-10-26 20:56:19 +11:00
Craig Small
14d6ab27d6 NEWS: Add entry for free -h --si fix
References:
 commit 91e5879228
 Issues #133 #223
 merge !140
2021-10-26 18:25:37 +11:00
Todd Lewis
e500ba6d97 fix uid/gid > 2^31
This MR revisits a partial fix from 2018. The problem stems from incorrect
handling of unsigned 32-bit uid_ts and gid_ts as signed when values are
large - i.e. when the high bit is set. In that case, pgrep and pkill fail to
identify processes by uid. (They succeed when finding the same processes by
username.) The primary fix for this is to impliment the "FIXME" comment in
proc/readproc.h, the implementation of which allows the removal of the (int)
casts from the partial fix from 2018.

The other fixed code in this MR consists of tests in strict_atol() that
detects and errors out on overflows.

References:
 Merge !146
2021-10-26 18:13:48 +11:00
ed neville
0496b39876 uptime: Correctly print pretty/short format
uptime -p would show empty output after 52 weeks of uptime. This commit
is largely the work of Ed but reformatted for newlib branch.

Signed-off-by: Craig Small <csmall@dropbear.xyz>

References:
 procps-ng/procps!141
 procps-ng/procps#217
2021-10-14 19:37:42 +11:00
Craig Small
5f760d5085 vmstat: Add NEWS and man page for previous 2021-10-14 18:52:34 +11:00
Craig Small
db861f2ce6 misc: Add NEWS for ps ignoring SIGURG
References:
 commit b6ccf865f8
2021-10-14 07:52:43 +11:00
Craig Small
75ba637182 docs: Add note in sysctl.conf.5 for line length
References:
 procps-ng/procps#77
2021-09-15 21:45:26 +10:00
Jan Rybar
08aa15ce4b sysctl: Return non-zero if param setting failed
Real usecase:
'sysctl -w user.max_uts_namespaces=2147483648; echo $?'
returns 0 even though it failed with EINVAL

The close_stream() realised there was an issue and printed an
error but didn't change the return value.

Slightly modified merge request.

References:
 procps-ng/procps!76

Signed-off-by: Craig Small <csmall@dropbear.xyz>
2021-09-15 21:07:43 +10:00
Craig Small
e886010ef7 misc: Add NEWS for previous
References:
 procps-ng/procps!91
2021-09-15 20:54:30 +10:00
Craig Small
6389deca5b sysctl: Support systemd glob patterns
systemd-sysctl handles glob patterns along with overrides and
exceptions. Now the procps sysctl does it too.

The return value for sysctl is consistently either 0 or 1.

Added tests to check sysctl functions.

References:
 procps-ng/procps#191

Signed-off-by: Craig Small <csmall@dropbear.xyz>
2021-09-15 20:07:32 +10:00
Jim Warner
2d75b2eb96 NEWS: update to acknowledge top's long cmdline options
Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-09-07 08:02:43 +10:00
Jim Warner
949382afe5 NEWS: announce changes for displaying autogroup values
Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-08-09 22:00:23 +10:00
Jim Warner
6318010dab top: document summary area changes involving 2 abreast
Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-08-06 20:17:51 +10:00
Jim Warner
37a4601882 top: introduced new focus toggle ('F'), man doc & NEWS
[ i also corrected an unrelated typographical error! ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-07-27 21:17:18 +10:00
Jim Warner
963d8ad52f NEWS: just play catch up with some top implementations
These changes were already implemented for this newlib
version, but not in the the master branch top version.

[ and we also add the missing 3.3.17 ps 'exe' change ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-07-27 21:17:18 +10:00
Craig Small
f25d462166 sysctl: Check path is under /proc/sys
sysctl would try to read/write any path you gave it either on
the command line or configuration file. It would append /proc/sys
on the path but not check for any sneaky path traversal with ../

This commit means it first resolves all paths using realpath(3)
and then checks the path starts with "/proc/sys/"

At first I thought this might be a non-issue, but perhaps someone
could put a file into the sysctl configuration path and.. do
something? Anyway its a 8-line fix and makes things more correct.

References:
 #179

Signed-off-by: Craig Small <csmall@dropbear.xyz>
2021-07-20 22:36:15 +10:00
Jim Warner
05a720fdba doc: updated NEWS plus top(1) for IO accounting fields
Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-06-25 15:25:51 +10:00
Craig Small
e782b1d859 ps: Add PSS and USS fields
The library added smaps_rollup fields in the referenced commit.
This commit exploits the new fields to give pss and uss options.

These options were first proposed back in 2015 by Petr Malat
and, with the library update, they are finally made it into ps.

Why use proportional or unique segment size? It is argued that
these give a better idea of the "real" memory usage of a process.

References:
 commit 12543b6c76
 issue #112
 https://www.freelists.org/post/procps/PSS-and-USS-support-for-ps
 https://lwn.net/Articles/230975/

Signed-off-by: Craig Small <csmall@dropbear.xyz>
2021-06-16 21:13:52 +10:00
Craig Small
16734d580e free: option to show memory commit limits
This commit is largely the userland only changes found in !73
added by Jens Låås (@jelaas)

References:
 procps-ng/procps!73
2021-06-16 20:29:03 +10:00
Jim Warner
9bdc1ca295 NEWS: add comments for the new smaps_rollup provisions
Signed-off-by: Jim Warner <james.warner@comcast.net>
2021-04-29 21:42:45 +10:00
Craig Small
feb7b5aa45 misc: Add NEWS item for previous 2021-04-24 23:17:35 +10:00
Craig Small
992b8b64f4 pkill: Add lt- variants
The pgrep code checks to see if the program is run as pkill or pidwait
and changes its behaviour accordingly.  Some older versions of libtool
run the programs as lt-pkill and lt-pidwait which means the tests fail.

We add these two program names to the checks.

Signed-off-by: Craig Small <csmall@dropbear.xyz>
2021-04-05 14:40:00 +10:00
Craig Small
2e1e8fcc85 slabtop: Check for bad d and o option combination
If you run slabtop with the -d option and then -o option the
delay gets set to zero and it runs forever. slabtop now checks
for this combination and errors.

Adding a DEJAGNU test also found that none of the slabtop
checks were running so they got added to the list and only the
ones that need /proc/slabinfo (if not readable) are skipped.

References:
 #160
2021-03-11 22:10:37 +11:00
Craig Small
9ddbc82000 ps: Add OOM and OOMADJ fields
top has had the OOMs and OOMa fields since 2011. Ten years its
probably time that ps had these fields added too.

ps output options have oom and oomadj for OOM Score and OOM Adjustment
respectively.

References:
 procps-ng/procps#198
 commit 367fd902da
 https://www.freelists.org/post/procps/PATCH-12-Add-missed-oom-support-to-libproc
2021-03-05 17:22:29 +11:00
Craig Small
9aa09d8862 library: Rename to libproc-2
What to call the new library?

Keep using libprocps wouldn't do, its a very different library from
the programs' point of view. It would also mean we could have some
clashes around the packages (two package names, same library name).

The ancient procps used libproc or libproc-a.b.c where a.b.c was the
package version. Kept the revision numbers down (it was always 0.0.0)
but the name of the library changed.

So if we use libproc-2 is there a clash with an ancient procps?
procps v 2.0.0 was around in 1999 so it was 22 years ago, also the
name of the library would have been libproc-2.0.0.so not libproc-2.so
so we're fine with that.

libproc-2 seems to fit, our second major re-work of the procps
library.

Signed-off-by: Craig Small <csmall@dropbear.xyz>
2021-02-20 22:30:31 +11:00
Craig Small
9c1a62b637 pidwait: Rename from pwait
pwait is already in at least Debian in a different package

References:
 https://bugs.debian.org/982391
2021-02-15 21:55:05 +11:00
Craig Small
dbc65b1ac8 misc: Add pwait to news
New command, pwait! Waits for another process to finish just like
pgrep finds or pkill kills another process.

References:
 procps-ng/procps!97
2020-12-22 15:17:58 +11:00
Craig Small
5a9c978f8a Merge branch 'teknoraver/procps-master'
References:
 procps-ng/procps!83
2020-12-22 14:36:09 +11:00
Craig Small
a55946a7a3 misc: Add watch extra colours to NEWS 2020-12-22 14:13:45 +11:00
Craig Small
90dd80781f misc: Document sysctl change bug
While sysctl did change the order of /run and /etc to match
systemd in the referenced commit, the Debian bug report that
brought it to light was not documented.

References:
 commit 24a1574f0a
 https://bugs.debian.org/950788
2020-12-22 11:00:15 +11:00
Craig Small
c019023e5c free,slabtop,uptime: complain about extra ops
free, slabtop and uptime would happily take extra command line
arguments and doing nothing about them. The programs now check
optind after option processing and will give you usage screen
if there is anything extra.

References:
 procps-ng/procps#181
2020-10-19 22:41:54 +11:00
Craig Small
e36fe38835 watch: Add no linewrap option
For long lines from a process, watch would wrap them around to the
next. While this default option has it uses, sometimes you want to
just cut those long lines down.

watch has a -w flag which will truncate the lines to the number
of columns. A few simple lines to do this new trick.

I think I caught all the ANSI state correctly but there might be
a chance it bleeds to the next row.

References:
 procps-ng/procps#182
2020-10-19 22:07:56 +11:00
Craig Small
955aaaf732 ps: Match on truncated 16 char for -C
The referenced commit the comm length was increased from 16 to 64
characters to handle the larger command names for things like kernel
threads.

However most user processes are limited to 15 characters which means
if you try something like ps -C myprogramisbiggerthansixteen this would
fail to match because /proc/<PID>/comm would only be myprogramisbigg

ps now checks the comm length and if it is 15 and if the given match
is 15 or more, it will only match the first 15 characters.

This is also how killall has worked for about a year.

Thanks to Jean Delvare <jdelvare@suse.de> for the note.

Copy of commit from master.

References:
 commit 14005a371e
 commit psmisc/psmisc@1188315cd0
 commit 3e1c00d051

Signed-off-by: Craig Small <csmall@dropbear.xyz>
2020-09-24 22:19:11 +10:00
Jim Warner
d3203d99dd top: fix potential SEGV when no tasks were displayable
This patch fixes a nearly decade old bug discovered by
Frederik Deweerdt. His merge request shown below would
be an adequate solution except for iterative overhead.

This alternate patch will represent substantially less
overhead for an admittedly extremely rare possibility.

Reference(s):
https://gitlab.com/procps-ng/procps/-/merge_requests/114

And-thanks-to: Frederik Deweerdt <fdeweerdt@fastly.com>
Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-09-13 10:00:49 +10:00
Jim Warner
c02fc0b977 NEWS: updated for those recent utf-8 translation fixes
Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-06-29 21:13:40 +10:00
Jim Warner
23224bb4af NEWS: acknowledge those two new top command provisions
Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-05-28 19:49:40 +10:00
Craig Small
9f751a7538 pgrep: Allow older than selection
Re-work merge request !79 of @edneville to permit older than
selection using the new library API.

References:
 procps-ng/procps!79
2020-05-17 23:00:27 +10:00
Craig Small
eeb8cf00a4 watch: add additional notes about environment
References:
 procps-ng/procps!62
 commit d3e0ff5a0a
2020-05-12 19:30:28 +10:00
Craig Small
48a201c46f vmstat: Add NEWS and revert comment from prev
Reverted the translation hint as the fields are used for both
normal and wide modes, so need to fit the smaller of the two.

Added NEWS item

References:
 commit 01c1b2345e
2020-05-12 19:06:34 +10:00
Arun Chandrasekaran
89392e67a9 pgrep: use sigqueue to pass value with the signal.
Based on the command line option, use 'sigqueue'
instead of 'kill' to pass the integer value with
the signal.

References:
 procps-ng/procps!32

Signed-off-by: Craig Small <csmall@dropbear.xyz>
2020-05-11 16:59:14 +10:00
Craig Small
7f44382938 kill: Adjust documentation for sigqueue
Added NEWS item
Changed the section for sigqueue as its 3 for me.
2020-05-11 16:51:28 +10:00
Craig Small
ebaa5f2823 NEWS: Add item for previous entry
Added NEWS item for pidof show worker threads patch

References:
 commit 9c3296bae9
2020-04-10 15:00:31 +10:00
Jim Warner
f5a6f4af6d NEWS: fix top alpha order, add 'e' command line switch
Signed-off-by: Jim Warner <james.warner@comcast.net>
2020-04-10 14:37:15 +10:00
Craig Small
7f83a8faab NEWS: synchronise the entries 2020-04-07 19:40:35 +10:00
Craig Small
b3f7bfede6 docs: Mention stime in ps.1
References:
 procps-ng/procps#164
2020-04-07 19:38:17 +10:00