This commit just eliminates an error message no longer
needed under that newlib <pids> interface. Plus, a few
enumerators in the header weren't in alphabetic order.
Signed-off-by: Jim Warner <james.warner@comcast.net>
As part of the push to remove the old API, 3 more old calls were
deleted from the library. Now all someone needs to do is fix ps
and we're largely done.
skill is one of the older and more unloved programs. It was still
scanning readdir /proc. It now will use the procps library like the
rest of the programs.
Signed-off-by: Craig Small <csmall@enc.com.au>
The first part of fixing skill/snice to use the library instead
of directly readdir()ing /proc which is what it does now.
Remove the kill code from the skill/snice code and put common
elements into lib/signals.c Not 100% sure that is the right
destination instead of a new lib file, but ok for now.
kill shares some parsing logic with skill/snice but mainly
around signal specifications. The "do it" code is very different.
Signed-off-by: Craig Small <csmall@enc.com.au>
The values of PROCPS_SORT_ASCEND & PROCPS_SORT_DESCEND
were a tad unintuitive. This patch will just make them
a more natural +1 for ascending and -1 for descending.
[ plus it still allows that fast path multiplication ]
[ instead of a comparison for signed numbers/strings ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the advent of the 'fatal_proc_unmounted' function
in the <pids.h> API to ensure the /proc filesystem was
mounted, we will finally get rid of the last remaining
vestiges of the former libprocps <readproc> interface.
[ also play a little catch up and whack some headers ]
[ that are not necessary now, beyond that readproc.h ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
After peeking at possible conversion of the ps program
it appeared that we may ultimately need the concept of
a 'static' pids_stack in suport of look_up_our_self().
In other words, one not impacted by procps_pids_reset.
This patch simply sets the stage for that possibility.
Signed-off-by: Jim Warner <james.warner@comcast.net>
With this patch the distinction between a 'long' KLONG
and a 'long long' KLONG is being abandoned in favor of
a consistent declaration as 'long' only. Plus we would
have also defined it as 'unsigned' except there exists
much code already explicitly specifying the qualifier.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit was prompted by that change from 'addr' to
'ul_int' in the <pids> interface. Along the way, KLONG
was removed as having long ago outlived its usefulness
as performance optimizations for weird configurations.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Work on converting ps has revealed the desirability of
trading a void pointer for that ul_int type. There was
much arithmetic employed against such values and casts
would otherwise have been required. Even pmap needed a
cast on occasions when comparing an internal variable.
Besides, there is much to be said for reducing demands
on (and the complexity of) the result structure union.
[ we choose ul_int over ull_int since that former is ]
[ the exact same size and capacity as a void pointer ]
[ regardless of whether compiled as 32-bit or 64-bit ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Not sure how this one has gone unnoticed until now but
with valgrind's help it's going bye-bye lickety-split.
Reference(s):
==26533== Conditional jump or move depends on uninitialised value(s)
==26533== at 0x4E4082B: procps_meminfo_stack_fill (meminfo.c:408)
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ but most definitely not all of them by a long shot ]
Reference(s):
proc/diskstat.c:186:17: warning: unused variable 'is_disk' [-Wunused-variable]
int retval, is_disk;
^
proc/namespace.c:110:1: warning: control may reach end of non-void function [-Wreturn-type]
}
^
proc/readproc.c:1131:50: warning: address of array 'ent->d_name' will always evaluate to 'true' [-Wpointer-bo
if(unlikely(unlikely(!ent) || unlikely(!ent->d_name))) return 0;
~~~~~~^~~~~~
proc/readproc.c:1158:50: warning: address of array 'ent->d_name' will always evaluate to 'true' [-Wpointer-bo
if(unlikely(unlikely(!ent) || unlikely(!ent->d_name))) return 0;
~~~~~~^~~~~~
proc/sysinfo.c:45:12: warning: unused variable 'stat_fd' [-Wunused-variable]
static int stat_fd = -1;
^
proc/sysinfo.c:49:12: warning: unused variable 'meminfo_fd' [-Wunused-variable]
static int meminfo_fd = -1;
^
proc/sysinfo.c:51:12: warning: unused variable 'vminfo_fd' [-Wunused-variable]
static int vminfo_fd = -1;
^
proc/sysinfo.c:53:12: warning: unused variable 'vm_min_free_fd' [-Wunused-variable]
static int vm_min_free_fd = -1;
^
proc/uptime.c:157:12: warning: unused variable 'realseconds' [-Wunused-variable]
time_t realseconds;
^
proc/uptime.c:158:16: warning: unused variable 'realtime' [-Wunused-variable]
struct tm *realtime;
^
vmstat.c:574:20: warning: format specifies type 'unsigned int' but the argument has type 'unsigned long' [-Wformat]
DSTAT(PROCPS_DISKSTAT_READ_TIME),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vmstat.c:578:20: warning: format specifies type 'unsigned int' but the argument has type 'unsigned long' [-Wformat]
DSTAT(PROCPS_DISKSTAT_WRITE_TIME),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
watch.c:230:7: warning: variable 'endptr' is uninitialized when used here [-Wuninitialized]
if (*endptr == '\0') set_ansi_attribute(0); /* [m treated as [0m */
^~~~~~
Signed-off-by: Jim Warner <james.warner@comcast.net>
Whoa, guess what field got overlooked in that march to
the newlib conversion? It was the TTY guy. However, it
wasn't completely top's fault - that newlib must share
at least some responsibility, for only offering a num.
[ and while we're at it, let's touch up the man page ]
[ to agree with ol' newlib's current implementation. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
OK, ok, this was kind of a huge omission. So please do
not select the TTY field for display in top quite yet,
at least until a next patch has been pushed to GitLab.
And to produce a correct sort order for this new field
the GNU 'strverscmp' routine was a necessary addition.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Uptime output for both w and uptime command were showing no
comma or space after days.
$ ./uptime
18:32:21 up 22 days7 min, 6 users, load average: 0.23, 0.46, 0.64
Minor tweak to fix this.
This commit is an outgrowth of the research into a bug
involving the recently added enum 'PROCPS_PIDS_extra'.
Since this program is not equipped to filter more than
one user, the help text and man document were updated.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit is an outgrowth of the research into a bug
involving the recently added enum 'PROCPS_PIDS_extra'.
The WHAT portion of output is being padded with spaces
since the printf field width format specifier was used
in combination with a precision specifier. This commit
reduces the format string to just that precision part.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit is an outgrowth of the research into a bug
that recently surfaced with the 'w' program. And while
that program was just a victim several inconsistencies
were found in the handling of library flags during the
research. This patch just address such irregularities.
Reference(s):
http://www.freelists.org/post/procps/newlib-at-the-precipice,4
Signed-off-by: Jim Warner <james.warner@comcast.net>
I can't remember during what sleepy hour that enum was
added to pids.h, but it damn sure fell short of a full
implementation by approximately 1,000,000 miles or so.
Strangely it surfaced on Craig's system seemingly ggdb
related whereas on mine, a segmentation fault was only
seen when that -h (no header) argument was being used.
Oh well, the road to its resolution also offered us an
opportunity to cleanup some other items along the way.
Reference(s):
http://www.freelists.org/post/procps/newlib-at-the-precipice,4
Signed-off-by: Jim Warner <james.warner@comcast.net>
The former whattime logic used to suppress that 'days'
output when the system had been up less than 24 hours.
But since the refactor for newlib, '0 days' was always
output under those conditions. So this commit restores
the former expected behavior of suppressing that item.
[ plus an erroneous calculation of uphours was fixed ]
[ and the clang warnings shown below were also fixed ]
Reference(s):
proc/uptime.c:74:10: warning: unused variable 'buf' [-Wunused-variable]
char buf[256];
^
proc/uptime.c:131:58: warning: data argument not used by format string [-Wformat-extra-args]
pos += sprintf(upbuf + pos, "%d min, ", uphours, upminutes);
~~~~~~~~~~ ^
proc/uptime.c:175:15: warning: expression result unused [-Wunused-value]
comma +1;
~~~~~ ^~
Signed-off-by: Jim Warner <james.warner@comcast.net>
When top was originally adapted to use that <pids> API,
the forest view support was redesigned since the proc_t
pad_3 byte could no longer be employed to hold a task's
nesting level. The redesign required additional arrays.
Now that the dust is settling on those initial efforts,
that PROCPS_PIDS_noop item was used as a substitute for
the old pad_3 along with a return to the former design.
But, while it proved adequate, the invariant nature for
that item required of top an extra initialization step.
So the library was coaxed into adding one more pid_item
(PROCPS_PIDS_extra) which will, unlike that 'noop' guy,
be reset with each reap. Everybody should be happy now.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The presence of that PROCPS_PIDS_noop may yet see some
use in the future with its 'no alter' library promise.
However, when top used that item to reflect the forest
view nesting level, the unchanging nature of that item
became more of an inconvenience than benefit. For each
refresh top was forced to loop through all the stacks,
resetting that PROCPS_PIDS_noop result struct to zero.
So this commit will now offer users a choice between a
new re-initialized item (PROCPS_PIDS_extra) & the noop
invariant. Since the library already resets all those
result structures, top will now utilize it at no cost.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Craig's recent commit under that newlib branch dealing
with namespace support has prompted me to review top's
handling of those fields. Currently, when such a field
is zero, top displays a dash ('-'). This will mean the
justification toggles ('j/J') will behave incorrectly.
This patch simply allows the potential zero to display
or be suppressed with the already existing '0' toggle.
Signed-off-by: Jim Warner <james.warner@comcast.net>
A patch containing the following miscellaneous tweaks:
. remove a function that handled former library errors
[ that function should have gone bye-bye with 3.3.11 ]
[ when those 'wchan' provisions were much simplified ]
. make clearer a distinction between 'new' and 'reset'
[ use PROCPS_PIDS_noop when procps_pids_new() called ]
[ since at that point we are only establishing depth ]
Reference(s):
http://www.freelists.org/post/procps/newlib-for-pgrep,1
Signed-off-by: Jim Warner <james.warner@comcast.net>
A patch containing the following miscellaneous tweaks:
. make a supposedly robust parameter test truly robust
[ ensure the largest enum value used with validation ]
. remove duplicate item test in cleanup_stack function
[ is already subordinate to test of PROCPS_PIDS_noop ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Functions related to namespaces were half-in half-out of the
procps library and didn't fit the standard naming scheme.
While struct { long ns[x]} is a bit clunky, its the only way
to "lock in" x. The alternative is to use ns_* variables.
This work was needed before pgrep could be converted.
I was surprised to find that ol' gcc silently converts
a single (different) enum into an address where one or
more enums were expected to be dereferenced. Of course
this was just yet another way to generate an old SEGV.
So this commit will strengthen those parameter checks.
[ we will *not* blame Craig for a failure to consult ]
[ the documentation, since it doesn't even exist yet ]
Reference(s):
http://www.freelists.org/post/procps/newlib-ps-fix,8
Signed-off-by: Jim Warner <james.warner@comcast.net>
Reference(s):
pmap.c:618:20: warning: variable 'start' is uninitialized when used here [-Wuninitialized]
maxw1, start,
^~~~~
Signed-off-by: Jim Warner <james.warner@comcast.net>
A patch containing the following miscellaneous tweaks:
. exploit (actually adapt) a pids.h provided VAL macro
. remove some obsolete, now unused, sort related items
. clarify the comment for specialized extractor macros
Signed-off-by: Jim Warner <james.warner@comcast.net>
A patch containing the following miscellaneous tweaks:
. avoided distortions unique to PROCPS_PIDS_TICS_DELTA
. addressed several smatch warnings and/or suggestions
. ensured oldproc_close invoked should tally_proc fail
. keeping that namespace clean, added a missing #undef
. added 2 comments acknowledging pids_item as unsigned
. added/clarified comments regarding proc flags & strv
From smatch analysis:
. these were indeed boo-boos
pids.c:580 make_hist() warn: the 'Hr' macro might need parens
pids.c:1058 procps_pids_reap() warn: variable dereferenced before check 'info' (see line 1056)
. these were not errors (and we did double check)
pids.c:1067 procps_pids_reap() warn: double check that we're allocating correct size: 8 vs 128
pids.c:1068 procps_pids_reap() warn: double check that we're allocating correct size: 8 vs 128
Signed-off-by: Jim Warner <james.warner@comcast.net>
As an additional test of the viability of the new pids
API, the pidof program has now been converted. As part
of that effort, several library changes were prompted:
. individual reads were added as an alternative to the
all encompassing (maybe over broad?) 'reap' provision.
. an alternate version of cgroup, cmdline plus environ
has been added to represent actual vectorized strings.
Signed-off-by: Jim Warner <james.warner@comcast.net>
As an experiment a helper macro used to extract values
from a result stack has been added to the header file.
Don't force callers to reinvent that particular wheel.
Signed-off-by: Jim Warner <james.warner@comcast.net>
