Commit Graph

171 Commits

Author SHA1 Message Date
Jim Warner
5ee1286625 top: allow re-ordering of saved line input upon recall
The original implementation of input line recall keeps
strings in the order established when initially added.
With this commit, that has been changed so any matched
string moves to the top of the saved input line stack.

[ well technically not the top since that's occupied ]
[ by an 'empty' string which serves multiple masters ]

Thus, the most frequently referenced strings over time
will percolate up and remain the most easily recalled.
But just in case anybody prefers the strict historical
ordering, a #define can restore the original behavior.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit 2efe275512

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-27 17:03:54 +01:00
Jim Warner
5c3fffcf28 top: improve the response to ^Z if awaiting line input
Now that line input offers users full editing freedom,
if top were to be suspended after issuing a prompt for
input, upon resumption an extra keystroke is necessary
to satisfy the outstanding read & refresh the display.

With this patch that extra keystroke is not necessary.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit 477b10c0bd

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-27 17:03:51 +01:00
Jim Warner
d497b1025a top: some idiot broke 'idle' mode with u/U 'exclusion'
This patch fixes the single stinkin' source line which
was responsible for breaking the top idle-mode toggle.

Without this change, either 'u' or 'U' must be invoked
just once before the 'i' command would show something.

(yes, everything's perfectly justified once again but)
(i'm not very happy over the need for this damn patch)

Reference(s):
commit d04297843f

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-27 17:03:49 +01:00
Jim Warner
2efe275512 top: enable recall of previous input lines for re-edit
With this commit, users can now retrieve previous line
input for re-editing and/or re-input using the Up/Down
arrow keys (or their aliases). This mirrors the 'bash'
or 'less' interface and represents a major enhancement
achieved via a somewhat minor impact to our code base.

[ 33 lines of code, 5 closing braces & some comments ]
[ all in 1 function, when TERMIOS_ONLY isn't defined ]

Currently, the upper limit for such recallable strings
has been set at 50 but that could be easily increased.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-24 08:43:45 +11:00
Jim Warner
477b10c0bd top: enable true line input editing with paste support
This patch changes the TERMIO_PROXY define back to the
former TERMIOS_ONLY thus changing the top default too.

Plus we can now use true line input editing while also
retaining paste capability. That former native termios
support provided only a limited destructive backspace.

Now we exploit the Left/Right arrow keys, Home/End and
Delete. Plus, the Insert key can toggle overtype mode!

[ The stage is now set for a really huge improvement ]
[ to any user input terminated with the <Enter> key. ]
[ So please stay tuned for the next patch to arrive! ]

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit fa21a6ca81

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-24 08:43:45 +11:00
Jim Warner
d04297843f top: enable user filtering via inclusion and exclusion
With this commit top can now display users which match
a user id/name or just those users which do not match.

The distinction is based on the presence or absence of
a leading exclamation point '!' (C negation operator).

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
Wishlist, http://bugs.debian.org/682086

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-24 08:43:45 +11:00
Jim Warner
c856a80ad5 top: end reliance on strdup not failing & roll our own
Lately, top has begun to rely more and more on dynamic
memory allocations rather than the static buffers that
were found in many of its structures. This was perhaps
most evident in the increasing use of the strdup call.

This commit trades that function call for the internal
equivalent which will protect us from malloc failures.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-24 08:43:44 +11:00
Jim Warner
44e61f0f6d top: man document now properly reflects delay interval
This commit corrects one reference to 'decimal place'.

Even though a running top supports a delay interval of
unlimited precision, and a delay interval of thousands
of a second in the rcfile, we intentionally imply that
any delay interval is limited to tenths of a sec only.

Later in the man document, in section 7a, one finds an
admission that a user can set any desired delay value.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/tt,4

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-24 08:43:44 +11:00
Jim Warner
bc5af4ae51 top: keep cursor hidden after Inspect 'Locate' request
A recent commit, that was intended to normalize cursor
handling, unintentionally exposed the cursor following
an Inspect 'Locate' request. This change will hide the
cursor once again through inst_view_choice's lifetime.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit f3a87cf634

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-24 08:43:44 +11:00
Jim Warner
e2c2bc5a95 top: the third time was charmed for end-of-job reports
When top was changed to allow some core dumps, the two
potential end-of-job reports were disabled by mistake.
Later, that was corrected so that those reports always
were allowed, if the respective #defines were enabled.

However, if there was an early exit via a command line
option or an error, those reports should not be shown.

This commit may have gotten it right on our third try!

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit 1da293bf59
commit d747659ad8

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-24 08:43:44 +11:00
Jim Warner
ca76af22ca top: lift the field management 6 col width restriction
When two somewhat cryptic error messages were recently
changed to more user friendly text, the logic limiting
maximum columns was left unchanged at six. This always
was a rather arbitrary limit but now the revised error
message could actually be misleading (ok, a huge lie).

With a 1 line code change (macro actually), this patch
lifts the internal restriction on maximum columns. Now
the real limit is based on a window's physical x-axis.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit 5a27c8095e
http://www.freelists.org/post/procps/top-won-the-sigwinch-war,6

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-05 22:11:22 +11:00
Jim Warner
dedaf6e1a8 top: disable tty scrollback buffer to improve SIGWINCH
A scrollback buffer used in several terminal emulators
could be a real inconvenience to a user following some
resize operations. Extra keystroke(s) would frequently
be required in order to properly render top's display.

After much sleuthing we unearthed two terminfo strings
which have the effect of disabling/restoring that darn
scrollback buffer. They were well hidden under a title
of strings 'to start/end programs using cup'. In turn,
'cup' deals with a tty's cursor addressing capability.

We don't care what you call them or what they refer to
so long as they get the job done. And these really do!
Be advised, however, that there are some side effects,
several of which can even be considered as beneficial:

. enter_ca_mode/smcup/ti disables scrollback buffering
( and that's good, it's what we had always hoped for )

. exit_ca_mode/rmcup/te restores the scrollback buffer
( but also restores screen contents existing pre-top )
( which is different from former program end results )
( where that last rendered screen was left untouched )

. the above screen replacement would impact ^Z suspend
( thus we keep the scrollback buffer disabled during )
( the suspend/resume sequence so that the users will )
( have a visual clue that top is suspended not ended )

If a terminal does not support these terminfo strings,
we will revert to top's former behavior at program end
where we position the cursor at screen bottom and then
output a single newline character. This will prevent a
shell prompt from embedding within top's final screen.

This commit's approach has been tested under a variety
of emulators and window managers, many of which linked
with libvte and others that employed their own scheme.
Examples are: gnome_terminal; kde konsole; lxterminal;
terminator; terminology; urxvt; xfce4-terminal; xterm.

I do now believe that the whole SIGWINCH deal is done!

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/top-won-the-sigwinch-war
http://www.freelists.org/post/procps/top-won-the-sigwinch-war,4

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-05 22:11:22 +11:00
Jim Warner
5a27c8095e top: make field management window size error non-fatal
Reference(s):
http://www.freelists.org/post/procps/top-won-the-sigwinch-war,3

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-30 10:53:49 +11:00
Jim Warner
f3a87cf634 top: normalize miscellaneous putp screen manipulations
This commit standardizes the usage of several terminfo
strings concerned with cursor position and visibility.

Henceforth we will adopt the following informal rules:

. Cap_home vs. Cap_clr_scr is preferred where possible
. Cap_curs_huge will be used with prompts for line i/p
. Cap_curs_huge will be used with help & color mapping
. Cap_curs_hide will be in effect in any other context

We've also added a missing Cap_clr_scr to the 2nd help
screen whenever the SIGWINCH interrupt was recognized.
This prevents a 'duplicated' row from appearing at the
top of the display (when resizing from small to large)
depending on an emulator's scrollback buffer contents.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-30 10:53:49 +11:00
Jim Warner
6f25f956e7 top: a few small adjustments to reduce display flicker
This change involves the Fields Management logic only.

With user position being maintained after signals, the
previous algorithm unfortunately used Cap_clr_eos with
each iteration of the loop. The screen flicker invited
with that choice was not apparent under all emulators.

With this commit, clearing to end-of-screen has become
conditional on whether or not there was a true resize.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit ba9092ad83

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-30 10:53:49 +11:00
Jim Warner
adca737758 top: change default allow/suppress define for SIGWINCH
No top #define is enabled and that constitutes default
behavior. So whenever a default behavior should change
the define must be changed too if it is to remain off.

This commit simply changes top's default behavior with
respect to allowing/suppressing any potential flood of
SIGWINCH during resize operations, if running under X.

Formerly top would block those signals to reduce costs
of repeated refreshes. That yields a requirement where
the user would have to provide another keystroke for a
final display update. That keystroke may not always be
needed now, but it ultimately depends on some terminal
emulator's scrollback buffer. In any case, the cost of
re-sizing may go up a bit, under most window managers.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit 4f33b6b8c5
http://www.freelists.org/post/procps/top-won-the-sigwinch-war
http://www.freelists.org/post/procps/top-won-the-sigwinch-war,4
http://www.freelists.org/post/procps/top-won-the-sigwinch-war,5

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-30 10:53:48 +11:00
Jim Warner
3fc8b69c7a top: update man document for current screen & SIGWINCH
Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-24 21:29:24 +11:00
Jim Warner
4f33b6b8c5 top: offer define to allow/suppress excessive SIGWINCH
After carefully working our way to the point where the
excessive SIGWINCH interrupts are now throttled, along
comes a commit which reverses all those prior efforts.

Actually it doesn't. It simply allows one to choose if
all those efforts should be reversed or remain active.

Why in the world would you even want to consider that?

Quite simply, to opt for responsiveness over overhead.
Oh, and depending on the terminal emulator used for X,
by enabling this OFF_SIGWINCH #define you will be able
to avoid the need for an extra keystroke after resize.

Besides it was an interesting programming challenge to
see just how few lines of code would be needed to make
it possible. Bottom line? Only 1 source line required!
(actually 0 lines, since the define disables one line)

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/unwanted-topinspect-window-enclosure-with-the-terminal-size-change

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-24 21:29:24 +11:00
Jim Warner
dd357e70e7 top: immunize against window manager flood of SIGWINCH
Whew, it was nip-and-tuck there for awhile but finally
we solved the SIGWINCH overload problem one finds with
most X window managers. Now if a window manager should
try to inundate ol' top with repeated SIGWINCH signals
they won't even be received so can't impact us at all.

And we achieve this miracle having never even issued a
sigprocmask, so all the top code executes with signals
totally unblocked. Intuition suggests it probably rubs
even more salt in the wound, but au contraire mon ami!

The key to our success was simply trading the 'select'
call for its cousin 'pselect'. Not only does that call
provide nanosecond granularity (vs. the former's usec)
but it takes a sigset_t parm which can then atomically
block the troublesome SIGWINCH guy until user input or
optional timeout. Net result? No more signal overload!

Now, if only we could just coax all terminal emulators
into one identical standard buffering scheme plus find
some way to emulate the most recent SIGWINCH, it would
be perfect. We would then obviate the user requirement
of typing yet 1 more key before seeing proper results.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/unwanted-topinspect-window-enclosure-with-the-terminal-size-change
http://www.freelists.org/post/procps/Sourceforge-project,7

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-24 21:29:24 +11:00
Jim Warner
de6df7d736 top: refactor all the low-level i/o logic for SIGWINCH
This commit primarily involves renaming functions plus
reorganizing logic in preparation for the next changes
which will hopefully yield the 'final solution' to the
excessive SIGWINCH signals under most window managers.

In this specific patch, the most significant change is
the introduction of a new 'ioa' function (io avail) to
focus all logic dealing with unsolicited user keyboard
input and exposed to signals and/or optional timeouts.

That new function is where our signal overload will be
ultimately defeated, if it is at all humanly possible.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/unwanted-topinspect-window-enclosure-with-the-terminal-size-change

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-24 21:29:23 +11:00
Jim Warner
ba9092ad83 top: preserve current screen when receiving a SIGWINCH
Prior to this commit, top has always taken the easiest
(safest?) approach when dealing with those troublesome
SIGWINCH interrupts. Whenever the user was on a screen
other than the main display, any signal received would
force an immediate exit, returning to the main screen.

With these changes, top will retain the user's current
position regardless of what screen he/she was viewing.

In support the following additional changes were made:
* the initial help screen requires an explicit end key
` not 'any other key' formerly used to request an exit
* the colors mapping screen instructions were improved
* ^Z response was made immediate, eliminating the flag
* the sigaction's SA_RESTART flag had to be eliminated
* sigprocmask logic was normailize to the bare minimum
* the POSIX.1-2004 async-signal safe functions used in
` the signal handlers were acknowledged and documented

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/unwanted-topinspect-window-enclosure-with-the-terminal-size-change

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-24 21:29:23 +11:00
Jim Warner
5856919e83 top: even more miscellaneous accumulated modifications
This commit just addresses the following minor issues:

. eliminate the leading tab character upon error exits
. standardized single key input as 'keyin', not 'chin'
. symbolic keys changed to guarantee no negative value
. placed most 'case' statement labels on a unique line
. standardized lvalue/rvalue convention in while loops
. fixed prototype declaration in the 'debug_END' macro

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-24 21:29:22 +11:00
Jim Warner
7060f9ab3a top: circumvent an ncurses version 5.9.20121017 glitch
Some testing under a new distro revealed what appeared
to be a broken top Inspect request. When the selection
was made, the resulting output was scrambled/scrunched
at the bottom of the screen (as if ^J's were missing).

This anomaly surfaced under Fedora-18 which happens to
use the above ncurses version. The bug was not present
in version 5.9.20120714 (available with openSUSE 12.2)
or the more widely available version of: 5.9.20110404.

It has now been confirmed that this problem originated
in version 5.9.20120825. It was then that buffering of
output was changed from stdio to some internal ncurses
scheme so as to avoid problems with its SIGTSTP logic.

Thanks to a very prompt response from Thomas E. Dickey
we also learned that contrary to the documentation the
putp logic does not call putchar internally. Thus, the
single putchar that Inspect was employing was actually
mixing 2 different buffering schemes: ncurses & stdio.

Thus, from now on we'll use putp() exclusively and try
to achieve single char output as efficiently as we can
while meeting that putp() string argument requirement.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
https://bugzilla.redhat.com/892674

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-23 21:23:36 +11:00
Jim Warner
d9f7c76114 top: prevent display corruption in Locate highlighting
There existed a small chance that the display could be
corrupted when a search string was found within a row.
For that to happen, conditions like these were needed:

. a very short Locate string was active in some window
. the string matched part of a terminfo <esc> sequence
. that sequence was used in highlighting running tasks
. the 'x' toggle was active (sort column highlighting)

One solution to this potential problem was to manually
turn off sort column highlighting before using Locate.
But rather than rely on a user remedy, we'll automate.

Since other top provisions were already being enforced
when Locate was in use (off 'i' and/or 'u'/'U'), we'll
now also force column highlighting off when the search
string in a given window is not empty. However, unlike
idle tasks and user filtering, when that search string
*is* emptied, we restore highlighting for that window.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-23 21:23:36 +11:00
Jim Warner
1da293bf59 top: accumulated miscellaneous code and comment tweaks
This commit just addresses the following minor issues:

. restored both lost end-of-job reporting capabilities
. added missing initializers to the DEF_RCFILE #define
. added 'nls_maybe' eye-catcher to the 'Scaled_sfxtab'
. removed a now superfluous 'READMINSZ' assertion test
. man document references to 'top' are more consistent

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-23 21:23:36 +11:00
Jim Warner
dec6b8ffe7 top: happy new year while incrementing copyright dates
Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-23 21:23:35 +11:00
Jim Warner
b01946742b top: eliminate task row anomalies with active searches
This potential problem is caused by frequently spawned
and short lived tasks which happen to sort above a row
containing a match from an active Locate request. It's
most likely to be visible when under Forest View mode.

This commit will eliminate a potential duplicated row.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-01 12:20:17 +11:00
Jim Warner
6c67c8d27a top: tweak the help screen text and termcap attributes
Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-26 09:11:19 +11:00
Jim Warner
a93f23e6ef top: place inspect demo buffer on par with read buffer
Both of the 'file' and 'pipe' Inspect read buffers are
always 2048 bytes bigger than is actually needed which
provided for some slightly simplified row paint logic.

However, with no real rcfile inspect entries, and thus
operating in 'demo' mode, the allocated buffer is only
2048 bytes total. This can produce a valgrind warning.

This commit simply puts the inspect 'demo' buffer on a
par with other allocated real buffers (an extra 2048).

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-26 09:11:18 +11:00
Jim Warner
9236b39f32 top: add '0' toggle (zero suppress) to the help screen
Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-24 08:59:57 +11:00
Jim Warner
ebf4d6dbba top: just touch up some comments for esthetic purposes
Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-23 06:48:36 +11:00
Jim Warner
2304af908c top: extend command line sort field override provision
In a effort to anticipate a potential future wishlist,
the recent '-o' sort override command line switch will
now support an override of the sort direction as well.

By prepending a '+' or '-' to any valid field name the
user will be able to guarantee a specific desired sort
direction. The '+' forces a high-to-low (normal) order
while a '-' reverses that to yield a low-to-high sort.

Without this addition users would be left to the mercy
of whatever was last specified for Curwin as reflected
in the rcfile or top's default of a high-to-low order.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:11:34 +11:00
Jim Warner
2e7adced74 top: extend scaled process memory range to include PiB
The recent change to task area memory scaling was just
a little short of optimum in its consistency and upper
limits. In fact, top could only scale memory fields up
to a maximum of 99.9999 TiB (with VIRT a little more).

While that seems like more than enough it was actually
artificially low, due to an unnecessary decimal place.

So, this commit standardizes both precision and widths
to achieve a minimum amount of scaling beyond the user
requested target plus reclaim some horizontal spacing.

. VIRT & DATA are now 7 bytes wide (not eight and six)
. other memory fields are 6 wide (were formerly seven)
. as before, KiB shows whole numbers only (no decimal)
. MiB, for its precision, shows a single decimal place
. all other memory ranges display three decimal places

The net result is a more homogeneous display with less
forced scaling and the recovery of three lost columns.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s);
http://www.freelists.org/post/procps/top-enhancements-i-hope,1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:10:12 +11:00
Jim Warner
e6cb40235e top: extend scaled summary memory range to include EiB
This commit increases the upper limit for summary area
memory scaling to 9999.999 Exbibytes. It also enhances
the man page through a helpful table for equivalences.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s):
http://www.freelists.org/post/procps/top-regression-reports
http://www.freelists.org/post/procps/top-enhancements-i-hope,1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:10:12 +11:00
Jim Warner
7b1f8fb173 top: enable foreign users under 'u'/'U' task filtering
This commit will allow user filtering as long as there
is a valid number representing a potential user ID. It
will serve, for example, chroot environments where the
specific user may be unknown to a host, or vice versa.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s):
http://www.freelists.org/post/procps/top-enhancements-i-hope,1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:10:12 +11:00
Jim Warner
9f4e72b208 top: do not catch SIGHUP, when operating in batch mode
This commit was adapted from the openSUSE patch, whose
original comments appear between the --- marker below.

It should be noted, however, that the original changes
were ineffective (wasted) because 'Batch' mode had not
yet been set when signals were being checked and their
handlers established. Thus, SIGHUP was never bypassed.

(of course, only our comments are perfectly justified)

------------------------------------------------------
Do not setup SIGHUP signal handler if we are in the batch mode

Top enables a signal handler for the SIGHUP signal (loss of terminal).  While
this makes sense for top's default interactive mode, it doesn't make any sense
for batch mode. If you run top in nohup just to collect data over time and
disconnect top finishes which is not what one would expect.
------------------------------------------------------

Reference(s):
http://www.freelists.org/post/procps/top-enhancements-i-hope,1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:10:11 +11:00
Jim Warner
ced5009f75 top: limit task cpu % based on total number of threads
Everyone has either accepted this potential distortion
or patched top to eliminate it. Now, the time has come
to regain some consistency when calculating that %CPU.

We'll now limit such values to: 100.0 * total threads.
And, it took way too long to address this little flaw.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s):
http://www.freelists.org/post/procps/top-regression-reports
http://www.freelists.org/post/procps/top-regression-reports,1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:10:11 +11:00
Jim Warner
27c2ef1e6d top: make rcfile immune from a potential locale change
The delay interval is kept in the rcfile in a floating
point format and is thus susceptible to changes in the
locale between invocations. So values written as #,###
could not be read if a new locale uses decimal points.

This commit takes control of our own decimal point and
will henceforth make top immune to locale switcharoos.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s):
http://www.freelists.org/post/procps/top-has-a-localedpendent-config-file-toprc
http://lists.opensuse.org/opensuse-bugs/2012-12/msg01466.html

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:42 +11:00
Jim Warner
688f4e7399 top: add the ability to suppress zeros in most columns
With the increased width and precision of memory and %
columns, the proliferation of 0's when there's nothing
to report seems like a distraction versus useful data.

This commit introduces the '0' toggle which can either
display or suppress those zeros. And, like the scaling
states this new state is also preserved in the rcfile.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:42 +11:00
Jim Warner
21e550bc08 top: provide the means to adjust scaled process memory
This commit is an unrequested outgrowth of the earlier
change dealing with summary area memory field scaling.
That user selectable scaling provision is now extended
to include 6 (at present) task oriented memory fields.

The new companion 'e' (lower case) interactive command
has been added and, like the 'E' command, it can cycle
each of the currently displayed memory columns between
KiB through TiB. There are, however, some differences.

Where '+' indicates summary area truncation at a given
radix, task memory fields are automatically scaled for
their column. Thus, not all rows use the same scaling.

And, while summary area field widths were not changed,
the task memory columns were widened in order to offer
more meaningful data when the radix was increased. The
precision is automatically increased in step with each
radix: MiB displays 2 decimal places, GiB 3 and TiB 4.

To compliment that additional precision, both the %CPU
and %MEM fields were widened by 1 column and now offer
precision up to 3 decimal places. But, unique to %CPU,
widening could already have occurred due to the number
of processors in some massively parallel boxes. At any
rate, total extra width for both memory and percentage
fields could amount to twenty (precious) columns more.

So for both the memory and % fields the original width
(along with loss of precision) can be restored via new
compiler conditionals which this commit also provides.

p.s. and it will be rcfile preserved for any restarts!

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s):
http://www.freelists.org/post/procps/top-regression-reports

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:41 +11:00
Jim Warner
bc46f67f9a top: provide the means to adjust scaled summary memory
Earlier this year, the switch from KiB to Mib as shown
in top's summary area was postponed to those occasions
when KiB exceeded 8 digits. In hindsight that may have
moved top in the wrong direction, given the difficulty
of digesting such large numbers of digits at a glance.

This commit adds a new 'E' interactive command used to
cycle the displayed memory amounts ranging from KiB to
TiB. Thus, users can choose the radix they wish shown.

p.s. and it will be rcfile preserved for any restarts!

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s):
http://www.freelists.org/post/procps/top-regression-reports

commit 95f2201730
Author: James Cloos <cloos@jhcloos.com>
Date:   Mon Feb 6 00:00:00 2012 -0500

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:40 +11:00
Jim Warner
407d1fc8f2 top: provide command line sort field override switches
This commit adds two new command line switches dealing
with the potential need to automate/script the setting
of top's current sort field independent of the rcfile.

The -o (lower case) switch requires a lone valid field
name as an argument, from among the 42 currently used.
Then, it overrides the config file's Curwin->sortindx.

And since field names are now translatable, they could
diverge from those reflected in the documentation. So,
a 2nd switch of -O (upper case) is also provided which
outputs all names as translated and understood by top.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s):
Bug-Redhat: https://bugzilla.redhat.com/871844
http://www.freelists.org/post/procps/PATCH-Allow-core-file-generation-by-ps-command-rhbz871825-rhbz512857,9
http://www.freelists.org/post/procps/PATCH-Allow-core-file-generation-by-ps-command-rhbz871825-rhbz512857,15
http://www.freelists.org/post/procps/PATCH-Allow-core-file-generation-by-ps-command-rhbz871825-rhbz512857,16

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:40 +11:00
Jim Warner
d747659ad8 top: follow ps lead, allow core dumps where applicable
Reference(s):
Bug-Redhat: https://bugzilla.redhat.com/871825
commit c1f10d11bc
http://www.freelists.org/post/procps/PATCH-Allow-core-file-generation-by-ps-command-rhbz871825-rhbz512857

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:39 +11:00
Jim Warner
7a7e402563 top: follow ps lead, treat SIGUSR1/SIGUSR2 as harmless
Reference(s):
commit f62fd63d9e
http://www.freelists.org/post/procps/PATCH-procps-states-a-bug-is-hit-when-receiving-a-signal-871824

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:39 +11:00
Jim Warner
015e95dec3 top: remove undocumented alias ('V') for version ('v')
This is doubtless not quite the solution envisioned by
the submitter, but 'V' should probably never have been
used as an alias for 'v' now that we have forest-view.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s):
Bug-Redhat: https://bugzilla.redhat.com/848290

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:38 +11:00
Jim Warner
73d83ec1c2 top: add pseudo type to the inspect demo '=' provision
When 'type' was added to the alternate status line for
the '=' key, the need for the demonstration 'type' was
overlooked. This commit avoids the '(null)' potential.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s);
commit 3b2b9a95e6

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:38 +11:00
Jim Warner
eeafd6cfe0 top: highlight all regular search string(s) when found
With the recent inspect search highlight provisions in
place, the lack of highlighting in task based searches
has grown from being only irritating to a real defect.

Thus, this commit introduces parallel functionality to
those searches initiated within a visible task window.
And just as separate inspect searches are possible for
each selection, per window task searches are provided.

However, it should be noted that there are differences
between task based searches and inspect type searches:

* There is no concept of out-of-view data when dealing
. with task rows -- if the data can't bee seen, it has
. not, in fact, been constructed from a proc_t struct.

* While inspect data is output at the character level,
. up to now all task display data was only potentially
. output and it was always based on a complete string.

* With task search highlighting, rows now containing a
. match must be output in pieces and, therefore, can't
. be optimized away like other rows which haven't been
. been altered. This is because top cannot predict the
. the contents of a search string or, how many matches
. might occur in a given row. Short search strings and
. many matches would raise buffer needs geometrically.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-11 22:54:25 +11:00
Jim Warner
2219c80514 top: refine inspect logic for already in-place matches
Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-11 22:54:25 +11:00
Jim Warner
3b2b9a95e6 top: add inspect entry 'type' to alternate status line
Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-11 22:54:25 +11:00
Jim Warner
8408a44e79 top: correct an inspect spelling error with nls impact
Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-11 22:54:25 +11:00