Currently, it isn't possible to establish an 'Inspect'
pipe that relies on SIGINT to end. That's because this
signal will also end the parent process (top) as well.
So this patch will temporarily ignore that signal when
processing any 'Inspect' pipe, allowing one like this:
. pipe ^I Trace Calls ^I /usr/bin/strace -r -p %d 2>&1
Signed-off-by: Jim Warner <james.warner@comcast.net>
Upon startup there exists the potential for some minor
memory leakage should some rcfile 'Inspect' entries be
invalid. By delaying any malloc/strdup until after the
entries are completely validated we will prevent that.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Parent tasks with collapsed children should have their
cpu reflect any unseen tasks only under the following:
1) When built without TREE_VCPUOFF having been defined
2) Exclusively when 'Show_FOREST' display mode was set
3) And only under the current window when in alternate
display mode (except if TREE_VWINALL has been defined)
So, this commit just ensures these objectives are met.
Reference(s):
. issue that began odyssey
https://gitlab.com/procps-ng/procps/issues/99
. original cpu implementation
commit 7c7903e50d
Signed-off-by: Jim Warner <james.warner@comcast.net>
While this newlib branch did not suffer that SEGV fate
the master branch did with children's %CPU accounting,
it didn't manage the 'TREE_VCPUOFF' #define optimally.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Using Ctrl-V for the collapse children key now appears
as a mistake. First, it's too close to that Ctrl-C key
which would prematurely terminate top. Second, a lower
case 'v' was unused and perfectly compliments an upper
case 'V' which is used to toggle 'forest view' itself.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/99
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just addresses these miscellaneous issues:
. make a few pseudo enum's just a tad more descriptive
. always use 'p' for pointers to a 'struct pids_stack'
. add just a little indent to the 'rSv' macro comments
. rearrange section dealing with new library interface
. always match order of local #undef to parent #define
. forest_begin array index usage is now more efficient
Signed-off-by: Jim Warner <james.warner@comcast.net>
Now, when a parent's children have been collapsed, the
cpu used by those unseen tasks will disappear no more.
Instead such tics will be added to the parent's total.
[ if one wished a return to the 'land of lost tics', ]
[ the '#define TREE_VCPUOFF' directive is available. ]
------------------------------------------------------
Note: With collapsible parents now displaying children
cpu usage, it will eventually be noticed the cpu stats
for the summary area and task areas often vary widely.
It's worth a reminder that for top's summary area each
individual cpu and the cpu summary is limited to 100%,
regardless of how many tics a linux kernel may export.
An individual task is limited to 100% times the number
of threads. But, in no case will cpu usage ever exceed
100% times total number of processors. Such limits are
further reduced under 'Solaris' mode ('I' toggle off).
In this mode, a task cpu usage will never exceed 100%.
These limits will now also apply to collapsed parents.
In addition to those influences, results are subjected
to kernel timer sampling anomalies and the distortions
inherent in a small sample size, made worse by smaller
delay intervals. Often there is just 1 or 2 tics for a
few tasks at smaller intervals such as: 1/10th second.
Anyway, should questions on this subject arise, a good
starting point, beyond the reminders above, is the 1st
link listed below. Those other links were derivatives.
Reference(s):
. from the kernel documentation
https://www.kernel.org/doc/Documentation/cpu-load.txt
. as mentioned in the above kernel documentation
https://lkml.org/lkml/2007/2/12/6
. from above, with many more links on the subject
https://www.boblycat.org/~malc/apc/
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ along the way we'll shorten some of the repetitive ]
[ variable width field narratives in top's man page. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch just addresses some edge cases with respect
to 'unseen' tasks. Given the ability to preserve other
filters in the rcfile, it's entirely possible the very
first task(s) may not be visible at top startup. Also,
when switching between windows ('a'/'w') we should try
to always position its row #1 on some visible process.
Lastly, a window might have *NO* visible tasks at all.
Therefore, protect 'window_hlp' from an infinite loop.
Signed-off-by: Jim Warner <james.warner@comcast.net>
To my knowledge, nobody has ever complained about some
anomalies when scrolling vertically if tasks should be
hidden from view. This can happen with the user filter
('u/U') or other filter ('o/O') features. And although
some tasks are not shown, they still impact scrolling.
This is most apparent when that scroll coordinates msg
is on ('C') & up/down arrow keys used (vs. pgup/pgdn).
Now that we can collapse/expand forked children, there
is a potential for yet more of those hidden processes.
So this commit normalizes vertical scrolling providing
an expected behavior. In other words, the up/down keys
skip the unseen tasks to reposition on a visible task.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch is simply preparation for upcoming vertical
scrolling enhancements. With those changes, it will be
impossible to predict what the beginning task position
should be at the time the message is currently issued.
This patch will allow such a message to be shown after
the individual windows' tasks have all been displayed.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The issue cited below really dealt with preserving the
'Other filter' criteria in the rcfile. But as an aside
the htop 'F6' feature (collapsed children) was raised.
I took that as an implied challenge and decided to try
implementing a similar feature in top. So, this commit
will now provide a brand new forest view toggle ('^V')
which will be used to collapse/expand forked children.
[ this patch will also lead to additional patches in ]
[ support of more rational vertical scrolling, since ]
[ many more tasks might now be hidden in some window ]
Reference(s):
. where this secondary issue was raised
https://gitlab.com/procps-ng/procps/issues/99
Signed-off-by: Jim Warner <james.warner@comcast.net>
In anticipation of a new collapsible child feature, we
will have to make some forest view variables available
to that 'keys_task()' function. This commit just moves
the forest view logic ahead of tertiary input support.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Well, after the rearranging and refactoring, all those
active 'other filter' entries for each window will now
be preserved in the user's configuration file via 'W'.
For raising the issue below, thanks to Marco Ippolito.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/99
Signed-off-by: Jim Warner <james.warner@comcast.net>
These modifications are being made now in anticipation
of some coming 'other filter' config file changes. Our
entries must be written last to the rc file since that
is where the users have been told to 'echo' additions.
Therefore, that 'config_insp' function must be adapted
to anticipate a passed buffer that was already primed.
Signed-off-by: Jim Warner <james.warner@comcast.net>
If we are to support preserving 'other filter' entries
in the rcfile, then the current logic setting up those
osel entries for a WIN_t must be shareable for startup
and when interacting with a user. So, this commit just
repositions this current code in a shareable function.
[ along the way, we give the prior guy a proper name ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
When we get around to saving that 'Other Filter' stuff
in the rcfile, we'll need access to the Fieldstab plus
the justify_pad() function. So this commit repositions
two 'osel' functions in anticipation of adding 1 more.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The 'config_file()' function was getting a little long
in the tooth, so this commit simply renames/rearranges
some stuff anticipating 'other filters' in the rcfile.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jeeze, there was no need to employ *both* strchr() and
strrchr() when ensuring fields hadn't been duplicated.
So let's avoid one of those function calls completely.
Signed-off-by: Jim Warner <james.warner@comcast.net>
We now use the actual terminfo 'max_colors' value with
the 'color mapping' screen, not that hard coded '256'.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/96
Signed-off-by: Jim Warner <james.warner@comcast.net>
When not displaying all tasks (the 'i' toggle is off),
the concept of vertical scrolling has no real meaning.
However, only 2 keys (up/down) impacting that vertical
position were currently being disabled with this mode.
This patch will extend such treatment to the following
additional vertical impact keys: pgup,pgdn,home & end.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This program does a good job of policing that vertical
scrolled position, ensuring that total tasks are never
exceeded. However, during transitions from thread mode
to normal task mode (the 'H' toggle) that wasn't true.
And while there was no real harm done, it did make the
use of up/down arrow keys "appear" disabled especially
if that scroll message was not displayed ('C' toggle).
This patch simply forces a return to row #1 whenever a
user toggles that display between thread & task modes.
Signed-off-by: Jim Warner <james.warner@comcast.net>
As it turns out, the very first entry in the 'iokey()'
tinfo_tab was preventing the proper translation of the
simulated PgUp/PgDn keys (ctrl+meta+k/j). Ignoring the
tortured history behind the most recent change to that
entry, this patch restores the previous value and once
again properly translates these particular keystrokes.
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the Qualys security audit, we began to harden our
treatment of the top rcfile. In particular, the values
read were checked so as to prevent some malicious user
from editing it in order to achieve an evil objective.
However when it came to colors I was surprised to find
that at least one user edited the rcfile for 256-color
support. Unfortunately, our new checks prevented this.
So this commit will provide the means to exploit those
extra colors with no need to manually edit the rcfile.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/96
Signed-off-by: Jim Warner <james.warner@comcast.net>
This guards against rcfile 'Inspect' entries which may
include non-printable characters. While this shouldn't
occur, we have no real control over those crazy users.
[ and, while such data can't be used maliciously, it ]
[ does adversely impact such a user's screen display ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
For our master branch, a Qualys patch referenced below
was reverted as being unwarranted. That original patch
was not applied in this branch so there was no revert.
However, there was 1 specific problem their patch had,
in fact, prevented. Thus, this patch now addresses it.
Reference(s):
. original qualys patch
0109-top-Protect-scat-from-buffer-overflows.patch
Signed-off-by: Jim Warner <james.warner@comcast.net>
Until the Qualys security audit I had never considered
it a possibility that some malicious person might edit
the top config file to achieve some nefarious results.
And while the Qualys approach tended to concentrate on
the symptoms from such an effort, subsequent revisions
more properly concentrated on startup and that rcfile.
This commit completes those efforts with 1 more field.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The command name for running tasks is displayed by top
in a variable length field, so the increase from 16 to
64 bytes was not a problem. However, there's one place
where top is sensitive to length - insp_view_choice().
So, this patch just bumps a buffer used to display it.
Reference(s):
. master branch increase to 64
commit 2cfdbbe897
Signed-off-by: Jim Warner <james.warner@comcast.net>
This will protect some remaining rcfile variables from
a possible manual editing of top's configuration file.
[ and correct two #error related boo-boos introduced ]
[ with the system default rcfile in the commit shown ]
Reference(s):
. introduced /etc/topdefaultrc
commit 55a42ae040
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch addresses a potential (but unlikely) buffer
overflow by reducing, if necessary, a memcpy length by
3 bytes to provide for an eol '\0' and 2 unused buffer
positions which also might receive the '\0' character.
[ note to future analysis tool: just because you see ]
[ binary data being manipulated in the routine, that ]
[ doesn't mean such function was passed binary data! ]
Reference(s):
. original qualys patch
0116-top-Fix-out-of-bounds-read-write-in-show_special.patch
Signed-off-by: Jim Warner <james.warner@comcast.net>
Whereas an original patch (referenced below) addressed
some symptoms related to manually edited config files,
this solution deals with root causes. And it goes much
beyond any single top field by protecting all of top's
fields. Henceforth, a duplicated field is not allowed.
Reference(s):
. original qualys patch
0114-top-Prevent-buffer-overflow-in-calibrate_fields.patch
Signed-off-by: Jim Warner <james.warner@comcast.net>
Rather than validate the window's 'sortindx' each time
it was referenced (as was done in the patch below), we
now ensure the validity just once when the config file
is read. Thereafter, a running top will police bounds.
Reference(s):
. original qualys patch
0102-top-Check-sortindx.patch
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch replaces an original patch referenced below
(omitted under this branch). We now validate variables
'graph_cpus', 'graph_mems' and 'summ_mscale' just once
at startup. Thereafter, top enforces the proper range.
[ we afford the same treatment to that 'task_mscale' ]
[ variable, which was ignored in the original patch. ]
Reference(s):
. original qualys patch
0099-top-Check-graph_cpus-graph_mems-and-summ_mscale.patch
Signed-off-by: Jim Warner <james.warner@comcast.net>
While it's only documented (so far) in commit text and
an occasional email I've tried to maintain some coding
standards primarily for reference/navigation purposes.
They also served, I felt, as useful mental challenges.
Someday I will get around to formerly documenting them
but in the meantime here are the ones for this commit:
. functions are grouped into logical (i hope) sections
. functions & sections are ordered to avoid prototypes
. function names are alphabetical within every section
. all functions & sections must be referenced in top.h
This patch just attempts to honor the above standards,
while also covering this new behavior in the man page.
[ please note that the net result of these 2 patches ]
[ is simply to avoid pathname truncations should our ]
[ limit of 1024 be exceeded. they do not have a role ]
[ in solving the 'local privilege escalation' issue. ]
[ and we can never prevent a user from setting their ]
[ HOME var to a directory writable by some attacker! ]
[ the only real protection for that CVE-2018-1122 is ]
[ those soon to be enhanced rcfile integrity checks, ]
[ achieved through several of the following patches. ]
Reference(s):
. original qualys patch
0097-top-Do-not-default-to-the-cwd-in-configs_read.patch
Signed-off-by: Jim Warner <james.warner@comcast.net>
- Make sure i is at least 1 before "i - 1" and "--i".
- Initialize endpflg (to 0, as it was originally, since it is static)
before the "for" loop (the "break" may leave endpflg uninitialized,
for example).
The safety of the critical function task_show() depends on the sanity of
Screen_cols. Just copy the tests on w_cols to Screen_cols (from the same
function adj_geometry()).
The default action for SIGURG is to ignore the signal, for example.
This is very similar to the patch "ps/display.c: Always exit from
signal_handler()."
---------------------------- adapted for newlib branch
. the 'isBUSY' macro is quite different under newlib
Signed-off-by: Jim Warner <james.warner@comcast.net>
Otherwise they may lead to out-of-bounds writes (snprintf() returns the
number of characters which would have been written if enough space had
been available).
Also, make sure buf is null-terminated after COLPLUSCH has been written.
If the HOME environment variable is not set, or not absolute, use the
home directory returned by getpwuid(getuid()), if set and absolute
(instead of the cwd "."); otherwise, set p_home to NULL.
To keep the changes to a minimum, we rely on POSIX, which requires that
fopen() fails with ENOENT if the pathname (Rc_name) is an empty string.
This integrates well into the existing code, and makes write_rcfile()
work without a change.
Also, it makes the code in configs_read() easier to follow: only set and
use p_home if safe, and only set Rc_name if safe (in all the other cases
it is the empty string, and the fopen() calls fail). Plus, check for
snprintf() truncation (and if it happens, reset Rc_name to the empty
string).
Important note: top.1 should probably be updated, since it mentions the
fallback to the current working directory.
