A Qualys audit patch, represented in the commit below,
added the _exit() call to our abnormal signal handler.
Unfortunately, that disabled the associated core dump.
This patch restores expected behavior of those signals
whose default produces a core dump file + termination.
Reference(s):
commit 2e4a594221
Signed-off-by: Jim Warner <james.warner@comcast.net>
Previous versions of ps used to only match on the first 15 characters
because that's what the kernel used to provide. Newer kernels have a
longer length for this field so procps has been updated to suit.
References:
procps-ng/procps#101https://bugzilla.suse.com/show_bug.cgi?id=1099091
The library now presents command names up to 64 characters, in line with
the kernel changes. ps command name selection (the -C option) now also
is 64 characters long.
References:
commit 2cfdbbe897
To avoid an out-of-bounds access at checkoff[tmp]. The strspn() at the
beginning of the function protects against it already, but double-check
this in case of some future change.
Right now, "we _exit() anyway" is not always true: for example, the
default action for SIGURG is to ignore the signal, which means that
"kill(getpid(), signo);" does not terminate the process. Call _exit()
explicitly, in this case (rather than exit(), because the terminating
kill() calls do not call the functions registered with atexit() either).
Before "strlen(outbuf)", if one of the pr_*() functions forgot to do it.
This prevents an out-of-bounds read in strlen(), and an out-of-bounds
write in "outbuf[sz] = '\n'". Another solution would be to replace
strlen() with strnlen(), but this is not used anywhere else in the
code-base and may not exist in all libc's.
pr_bsdstart(): Replace "strcpy(outbuf," with "snprintf(outbuf, COLWID,"
(which is used in all surrounding functions). (side note: the fact that
many pr_*() functions simply return "snprintf(outbuf, COLWID," justifies
the "amount" checks added to show_one_proc() by the "ps/output.c:
Replace strcpy() with snprintf() in show_one_proc()." patch)
pr_stime(): Check the return value of strftime() (in case of an error,
"the contents of the array are undefined").
help_pr_sig(): Handle the "len < 8" case, otherwise "sig+len-8" may
point outside the sig string.
pr_context(): Handle the empty string case, or else "outbuf[len-1]"
points outside outbuf.
Enforce a maximum max_rightward of OUTBUF_SIZE-1, because it is used in
constructs such as "snprintf(outbuf, max_rightward+1," (we could remove
the extra check at the beginning of forest_helper() now, but we decided
to leave it, as a precaution and reminder).
The minimum max_rightward check is not strictly needed, because it is
unsigned. However, we decided to add it anyway:
- most of the other variables are signed;
- make it visually clear that this case is properly handled;
- ideally, the minimum max_rightward should be 1, not 0 (to prevent
integer overflows such as "max_rightward-1"), but this might change
the behavior/output of ps, so we decided against it, for now.
Instead, we fixed the only function that overflows if max_rightward is
0. Also, enforce the same safe range for max_leftward, although it is
never used throughout the code-base.
1/ Do not go deeper than the size of forest_prefix[], to prevent a
buffer overflow (sizeof(forest_prefix) is roughly 128K, but the maximum
/proc/sys/kernel/pid_max is 4M). (actually, we go deeper, but we stop
adding bytes to forest_prefix[])
2/ Always null-terminate forest_prefix[] at the current level.
This patch solves several problems:
1/ Limit the number of characters written (to outbuf) to OUTBUF_SIZE-1
(-1 for the null-terminator).
2/ Always null-terminate outbuf at q.
3/ Move the "rightward" checks *before* the strcpy() calls.
4/ Avoid an integer overflow in these checks (e.g., rightward-4).
The previous commit had one minor bug in it because the fields need
to be alphabetical and times comes after timeout.
Added NEWS item for this feature
Added another testsuite check for new flags in case they
disappear or go strange one day.
References:
commit 8a94ed6111
The ps program generally supports multi-byte sequences
in strings representing user and group names. However,
should a multi-byte sequence span the maximum width of
a column, the '+' inserted by ps to signify truncation
will corrupt that sequence, misaligning the text line.
Unfortunately, there's insufficient info returned from
the escape_str function (who calls escape_str_utf8) to
provide a robust response. So, this commit will revert
to the old standby of displaying a number when the '+'
character would've corrupted that multi-byte sequence.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The combined results of merge request #49 without that
overhead plus distortion in this repository's history.
Prototyped-by: Wayne Porter <wporter82@gmail.com>
Reference(s):
proc/readproc.c: In function 'statm2proc'
proc/readproc.c:627:9: warning: variable 'num' set but not used [-Wunused-but-set-variable]
ps/output.c: In function 'pr_context':
ps/output.c:1273:14: warning: unused variable 'tried_load' [-Wunused-variable]
ps/output.c:1272:16: warning: unused variable 'ps_is_selinux_enabled' [-Wunused-variable]
ps/output.c:1272:16: warning: 'ps_is_selinux_enabled' defined but not used [-Wunused-variable]
ps/output.c:1273:14: warning: 'tried_load' defined but not used [-Wunused-variable]
ps/output.c:1837:18: warning: 'shortsort_array_count' defined but not used [-Wunused-const-variable=]
ps/output.c:1803:18: warning: 'aix_array_count' defined but not used [-Wunused-const-variable=]
ps/parser.c: In function 'arg_type':
ps/parser.c:1098:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
ps/parser.c:1099:34: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
ps/sortformat.c: In function 'format_parse':
ps/sortformat.c:241:1: warning: label 'out' defined but not used [-Wunused-label]
ps/stacktrace.c:176:13: warning: 'stack_trace_sigsegv' defined but not used [-Wunused-function]
watch.c: In function 'process_ansi':
watch.c:234:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
watch.c:237:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch ensures that namespace output will look the
same whether ps is built under a 32 or a 64-bit model.
[ it would have been easier to change that library's ]
[ data type, but we'll avoid breaking that ABI again ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
While a Debian bug report referenced below was limited
to the 'eip' and 'esp' fields, this patch also extends
address width adaptations to some other addresses too.
[ and, we do so in a far less invasive manner than a ]
[ redhat approach shown below adding two new fields! ]
Reference(s):
. new debian bug report
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=846361
. old redhat solution
https://bugzilla.redhat.com/show_bug.cgi?id=244152
Signed-off-by: Jim Warner <james.warner@comcast.net>
dlopen() functionality is only used when SELinux support is enabled, so
<dlfcn.h> only needs to be included when ENABLE_LIBSELINUX is
defined. This fixes the build in configurations where <dlfcn.h> is not
available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adapts the ps program to a newly add proc_t
field and provides for new support in that top program
along with his man document (ps was already ok there).
Signed-off-by: Jim Warner <james.warner@comcast.net>
We'll now display a '?' for any systemd field when our
library was built without that above configure option.
Since the man page documents such fields this approach
is far superior to that old (confusing) error message:
. error: unknown user-defined format specifier "slice"
Signed-off-by: Jim Warner <james.warner@comcast.net>
If SELINUX is enabled but the machine is using another MAC system
(like apparmor), ps will fallback to just parsing
"/proc/%d/attr/current", otherwise the label/context would not
be properly displayed in that case.
References:
https://bugs.debian.org/786956
Signed-off-by: Craig Small <csmall@enc.com.au>
ps previously followed the Unix98 standard when it comes to
user-defined output, sometimes. This meant you could have
user output format with a header that included commas and
equals signs. It was dependent on if ps thought you wanted
sysv or bsd format and THAT was dependent on things in previous
options.
It was very confusing to a user because
ps p $$ -o pid=,comm=
gave you a two-column output but
ps -p $$ -o pid=,comm=
would give you a one column output with the header ",comm="
The -p versus p means (to ps) you want sysv or bsd parsing.
Unix98 standard or not, this is plainly just silly.
The commit removes any of the quirks Unix98 has with user defined
output. If you really wanted a ps header with commas in the output,
today isn't your day.
Signed-off-by: Craig Small <csmall@enc.com.au>
The cgroup field while shown as a vector is a concatenated
string, so alot of the complexity of sorting and displaying
has gone.
This change simplifies the cgroup sorting and adds display
and sorting for the name attribute of the cgroup, if found.
Signed-off-by: Craig Small <csmall@enc.com.au>
A rather small fix to sort by cgroup. This sorting function
could be used for other string vector entries, but I can't
see why you want to for, say, environment.
Reference:
https://bugs.debian.org/692279
Signed-off-by: Craig Small <csmall@enc.com.au>
ps has two columns showing the same data which is elapsed time, just
the format is changed:
etimes - elapsed time in seconds
etime - elapsed time in DD-hh:mm:ss
ps used to only sort by etime but not etimes, by making etimes
and alias of etime for sorting both flags work.
References:
https://bugs.debian.org/794619
Signed-off-by: Craig Small <csmall@enc.com.au>
Added function procps_linux_version() which used to be an
exported integer instead. Also changed the method of obtaining
the linux version (more correctly the os release) to use a specific
procfs entry. This works for both Linux and FreeBSD.
This patch will bring three of our man pages into line
with the recent refactor of the libprocps wchan logic.
[ and also eliminates more damn eol whitespace which ]
[ snuck in our repo with the commit referenced below ]
Reference(s):
http://www.freelists.org/post/procps/WCHAN,11
commit cf4788c28d
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch was made necessary by those library changes
in support of recently revised/simplified wchan logic.
In addition, this commit eliminates a broken alternate
'namelist' provision which was intended to allow users
to specify a System.map file to be used in translating
addresses into function names. But, the real effect of
the now defunct 'N' and '-n' options was to indirectly
force addresses (not names) to be displayed since such
user named map files could not be successfully parsed.
Besides when the required FRAME_POINTER kconfig option
is absent there is no address to translate and when it
is present /proc/PID/wchan is already translated. Thus
an alternate mapping is unnecessary and inappropriate.
[ we'll forgive POSIX for documenting '-n namelist' ]
Reference(s):
http://www.freelists.org/post/procps/WCHAN,11
Signed-off-by: Jim Warner <james.warner@comcast.net>
It doesn't make any sense to have the binary version strings
embedded into the library. The version strings are defined
already either in the Makefile or in include/c.h
ps now truncates usernames and doesn't change them to uids.
Man page is now updated with the correct information
Signed-off-by: Craig Small <csmall@enc.com.au>
This will be required for subdir-objects, otherwise automake will have
problems with more than one Makefile.am having rules to build the same
files.
Tested that it builds and both `make check` and `make distcheck` work.
Tested `make install` and compared the tree with the one installed
before this commit, both installed the binaries to the same locations.
The binaries are also in the same location in the build tree (for
instance, ps/pscommand is still there.)
Checked the binaries for the correct libraries linked into them. Binary
sizes matched before and after this change.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
This is required for out-of-tree build to work, since many source files
include e.g. proc/*.h which is not under the include/ directory.
Tested that `make distcheck` starts working after this patch.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
