This commit arose out of the discussion (and research)
surrounding the issue cited below. It is an attempt to
consolidate and standardize the calculation of jiffies
categories (e.g. 'idle', 'busy', etc.) once & for all.
Also included is the enum STAT_TIC_NUM_CONTRIBUTORS in
case anyone, in the future, decides to calculate usage
based upon elapsed time * Hz (like top does in process
level %CPU stats). In such an event, a total number of
CPUs or NUMA Nodes would be needed for proper scaling.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/48
Signed-off-by: Jim Warner <james.warner@comcast.net>
Unlike the ps kludge under the master branch to ensure
that namespaces appear the same under both 32 & 64-bit
models, this newlib branch already used a proper type.
However source data still carried the original type as
'signed long' versus that more proper 'unsigned long'.
So, this patch makes sources & destinations identical.
Reference(s):
. master branch ps kludge
commit c41c614b0c
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit will resolve the RedHat Bugzilla #1322111.
[ import from identical commit against master branch ]
[ but without trailing whitespace, thank you so much ]
Imported by: Jim Warner <james.warner@comcast.net>
In each module employing a priming read at 'new' time,
should that read fail, a call to 'unref' will be made.
However, there is a hidden dependency that these calls
must never occur before the context 'refcount' was set
due to the way an 'unref' conditional was constructed.
So this commit just ensures that 'unref' will function
as expected, even if called with a 'refcount' of zero.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Removing the Item_table 'stat' oldflags for WCHAN_ADDR
was wrong since that 'stat' field is not a constant 0.
Rather, it could assume these 3 values: -1, 0, and +1.
I have not been able to pin down a '-1' result, but it
probably means some sort of permission error (-EPERM).
The '1' or '0' values were supposed to distinguish the
tasks that were or were not blocked (whether there was
a wchan address). However, in practice there is little
correlation between those values and availability of a
kernel symbol in /proc/$$/wchan (perhaps due to race).
Anyway, the real point is that a 'stat' wchan does not
now intentionally contain an address. Thus, outputting
'ffffff', '-' or '1' in programs like ps is senseless.
So this patch just eliminates PIDS_WCHAN_ADDR from our
item enumerators leaving only the PIDS_WCHAN_NAME guy.
Now the new library can't be blamed for bad addresses!
Reference(s):
. removed Item_table 'oldflags'
commit c4aa6c0ab4
. linux removal of wchan addresses
commit b2f73922d119686323f14fbbe46587f863852328
Signed-off-by: Jim Warner <james.warner@comcast.net>
It seems inappropriate to blindly include fields known
to always be zero in our brand new library. Therefore,
this patch removes support for three such enumerators.
[ that stat 'it_real_value' (PIDS_ALARM) field could ]
[ have been made obsolete before a linux 2.6 release ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just contains some tweaks to comments plus
a few adjustments to whitespace for alignment purposes
and a normalization of the header inclusion #define's.
[ plus a spelling error in one header file was fixed ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
When this module was upgraded to 3rd generation in the
patch referenced below, numa node support was migrated
from the top program into newlib. The 'guest_nice' and
'guest' tics were overlooked as top did not need them.
So, this commit corrects that oversight and achieves a
proper symmetry between the cpu & numa jiffies counts.
Reference(s):
. 3rd gen redesign, numa support imported
commit abc71a46ad
Signed-off-by: Jim Warner <james.warner@comcast.net>
A priming read at 'new' time in that <slabinfo> module
was important so that permission problems are detected
early. Plus, it also had the potential of making delta
values valid when 'get' or 'select' were first called.
It is for that latter reason that such a read was also
incorporated in the <diskstats> module 'new' function.
No other module, however, employed such priming reads.
This patch just brings those potential benefits to all
of our other newlib modules with the exception of that
<pids> guy. That module is, of necessity, sufficiently
different from those others to justify such exclusion.
Not only are there precious few DELTA enums in <pids>,
but the costs of a priming read would be much greater.
[ otherwise, these newly added priming reads have no ]
[ measurable negative impact on performance/timings. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
The <slabinfo> header provides 3 groups of enumerators
with prefixes of SLABINFO, SLABS & SLABNODE. The first
is strictly user oriented & isn't supported internally
by any structure. The other two, however, have structs
associated with 'em but, unfortunately, 1 is misnamed.
The 'struct slabs_node' is associated with 'nodes' and
supports the enumerators with the SLABNODE prefix. But
the 'struct slabs_hist' was associated with 'hist' yet
supports those enumerators with just the SLABS prefix.
We do not care very much what some structure is called
but we do care about an identifier used manipulate it.
This patch will trade the 'hist' identifier associated
with 'struct slabs_hist' for a more congruous 'slabs'.
[ it's awful when the author can't remember what the ]
[ true meaning of an identifier is after creating it ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
If, in fact, numa nodes are dynamic (like that current
total of on-line cpus) the existing logic was lacking.
It included an early return before checking the total.
So, this commit ensures that the nodes total is always
set or updated consistently in only a single function.
There's no need to set it at the time 'new' is called.
[ and since under our existing code this nodes total ]
[ could never possibly have been zero, the erroneous ]
[ test (with the early return) has now been whacked! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Still unhappy with a minor memory leak associated with
libnuma, I experimented with omitting the dlclose that
was issued at module's end. For some reason which will
remain a mystery, the valgrind leak then went bye-bye.
So this patch just omits one use of dlclose and relies
on whatever kernel magic is at work to free the memory
when each process ends. We kept, however, the original
code (now commented-out) to serve as a future caution.
There remains one potential (but unlikely) dlclose use
near the original dlopen. But there will be no leak as
that 'numa_node_of_cpu' will not yet have been called.
This seems to be the culprit that triggers such leaks.
None of this libnuma shit would likely have come close
to hitting our fan had the numa developers provided us
with 'new' and 'unref' functions like our newlib does.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Recent profiling and timings have resulted in improved
newlib performance. This patch completes that process.
It just normalizes naming conventions employed for all
allocations involving reaped stacks & history support.
The modules offering a 'reap' function will also offer
the now standardized corresponding STACKS_INCR define.
The modules which provide dynamic history support will
now have a separate #define called NEWOLD_INCR used in
allocations/reallocations. And, while values currently
are set equal to that STACKS_INCR value, in the future
some reason for divorcing those two may be discovered.
----------------------------- for future reference ---
In those modules which contain the STACKS_INCR #define
it is tempting to specify a large value so as to avoid
repeated calls to malloc/realloc. However, in doing so
an extra runtime price will be paid in 'cleanup_stack'
calls with any iterative programs like top or slabtop.
So, with the current values a balance has been sought.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Profiling revealed a large amount of time spent in the
'escape_str_utf8' function (escape.c) with both of our
NLS branches (newlib and master). That same result was
not seen under an ancient top-3.2.8 program & library.
Well, the 3.2.8 result was ultimately explained by the
absence of a 'setlocale', necessary under NLS support.
Thus, when that ancient library tested for locale, all
it got was 'ANSI_...' & assumed 'UTF-8' wasn't active.
But after a hack to that ancient code to place it on a
par with newlib/master, I still found cost differences
that led me to revisit an old change referenced below.
It turns out that 'iswprint' costs far more than would
a call of 'isprint', even with the extra support code.
So this commit just reverts that five year old change.
Reference(s):
commit 7b0fc19e9d
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch contains the following miscellaneous stuff:
. The pids_stacks_fetch() routine might call for newly
allocated stacks to be itemized. However, that job was
already tended to by the pids_stacks_alloc() function.
So, this patch just eliminates a redundant invocation.
------------------------------------------------------
. The concept of 'dirty_stacks' has not kept pace with
the evolving stacks implementation. Originally, stacks
were considered dirty only if free() of dynamic memory
was needed before refreshing any single result struct.
Later, with the introduction of the 'extra' item and a
promise to reset it to zero, 'dirty' was much broader.
So, this patch just treats the dirty flg as others do.
------------------------------------------------------
. Lastly, a word or three about performance & timings.
Tuning efforts concentrated on the <pids> API and top.
And unless an oldlib equivalent to the preceding patch
is applied (favoring stat vs. status), newlib top will
often outperform the oldlib version (obviously wrong).
So assuming /proc/stat is preferred in both libraries,
generally speaking, a cpu and elapsed time increase of
1-5% was found for this new stacks oriented interface.
Of course, there's also an increased memory footprint.
There are some occasions, however, when the newlib top
is at a substantial disadvantage. For example if WCHAN
or TTY is displayed, such items will be present in all
newlib reaped stacks (i.e. every process). But old top
would only incur such overhead with displayable tasks.
Thus, oldlib top could outperform newlib by up to 25%,
for example, if only fields requiring NO library flags
were displayed. However, such a scenario is not likely
since only GID, UID, PID, TGID & WCHAN would be shown.
In the usual case, that overhead associated with WCHAN
and/or TTY is overshadowed by other top runtime costs.
All in all a pleasing outcome I deem quite acceptable.
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
Long ago, in a galaxy far away (when top was in charge
of library FILL flgs) /proc/status was to be preferred
over /proc/stat if a field could be satisfied by both.
This was done to avoid costly 64-bit math emulation in
a 32-bit application due to 'unsigned long long' data.
Well it's time to acknowledge the prevalence of 64-bit
platforms. And in such an environment the cost picture
has shifted significantly. It now costs 14 times (wow)
as much to access /proc/status compared to /proc/stat.
In other words, even with '%llu' variables, a sscanf()
call in stat2proc() beats the pants off that home brew
gperf based hashing employed by the status2proc() guy.
In fact, status2proc incurs higher costs than found in
the most expensive aspect of top's forest view option.
Here's a gprof extract to illustrate the costs. It was
produced with an rcfile requiring fields from both the
/proc/stat & /proc/status pseudo files (among others).
There were 5000 iterations in each of 4 separate gprof
runs subsequently merged into 1 gmon.sum for analysis.
% self self
time seconds calls us/call name
----- ------- ------- ------- -----------
28.65 4.10 4689423 0.87 status2proc
26.14 3.74 40000 93.50 forest_adds
...
01.96 0.28 4689427 0.06 stat2proc
[ since forest_adds is recursive, the calls value is ]
[ the non-recursive #, its 'call graph' shows totals ]
Anyway, now that such cost is known this patch becomes
what is euphemistically known as the usual no-brainer.
[ jeeze, was it really this long between profilings? ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will begin some refinements associated with
gprof. Initially, functions names have been changed to
help in identifying potential bottlenecks. This effort
also included the obscure set, free and sort routines.
Plus the following additional modifications were made:
. the stacks_alloc prologue was generalized plus added
to a couple of modules where it had not yet propagated
. a couple of the '// end ...' comments were corrected
. some functions have been formally tagged as 'inline'
Signed-off-by: Jim Warner <james.warner@comcast.net>
The immediately prior commit demonstrated how our APIs
might be expanded in at some point in the future while
maintaining binary compatibility in previous programs.
However, since we've yet to release the 1st version of
our new library, there's no need to violate alphabetic
ordering just yet. So, this patch restores that order.
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the 4.8 kernel, 2 new fields will be added to the
meminfo pseudo file. This commit, soon to be replaced,
is intended as an example of how such changes might be
incorporated plus still maintain binary compatibility.
This actually goes further than is strictly necessary,
by retaining meminfo_item ordering for 'set' functions
and the creation of hash table entries. However, there
is only 1 true requirement, that of Item_table entries
which must always agree exactly with item enumerators.
All of the other changes could be done alphabetically.
Ok, so what happens when an old program encounters the
new expanded meminfo items? Well, if it was thoroughly
tested against an old library, it won't even see those
new fields. On the other hand, if it somehow exceeds a
previous MEMINFO_logical_end, then it will just get an
extra result structure or two, with no real harm done.
[ this patch is being replace by the very next patch ]
[ so that our iniitial newlib release can maintain a ]
[ strict alphabetic ordering in all areas initially! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
When the numa stuff was imported from the top program,
that #include for dlopen() was not made conditional as
it should have been. Well, here it is being corrected.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Rather than return a 0 result for all VAL type errors,
return what would have been without validation active.
This will enable a program like pgrep to still print a
result even though it used some incorrect type member.
With this commit, our VAL macro validations logic will
behave in exactly the same way as the GET validations.
While warning messages may be issued, except for a bad
enumerator, values will always be returned to callers.
Signed-off-by: Jim Warner <james.warner@comcast.net>
One ought not to assume that random memory access will
always succeed or, when it does, that an obviously bad
item enumerator will always be found at that location.
Thus, this patch corrects some really poor assumptions
associated with the 'xtra_procps_debug.h' header file.
[ and it does so in somewhat contorted ways so as to ]
[ avoid several darn gcc -Wnonnull warning messages! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
When users call the native 'get' functions they have a
responsibility to check that the result struct address
was indeed returned. But when using those 'GET' macros
there was no protection for possible NULL dereference.
So this patch will add some protection for a potential
failure of an underlying 'get' function. And should it
occur then those 'GET' macros will just return a zero.
Plus, we'll also mirror that behavior in the debugging
header should the XTRA_PROCPS_DEBUG #define be active.
And, we might as well add a warning when invalid items
are passed to 'GET' macros, just like we do for 'VAL'.
[ lastly, we added the missing opening parens/braces ]
[ to 2 'GET' macros in that xtra-procps-debug.h file ]
[ which went unnoticed until the qa folks caught up. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
During development, we now have a means for validating
that a type referenced in application code matches the
actual type set by the library. The new feature can be
activated through either of the following two methods:
1) ./configure CFLAGS='-DXTRA_PROCPS_DEBUG' (all pgms)
2) an #include <proc/xtra-procps-debug.h> (single pgm)
[ in the future, one could add a formal configure.ac ]
[ provision. but for now a manual approach is safer. ]
Lastly, for any module which provides a sort function,
the handling for both 'noop' & 'extra' enumerators was
made consistent. Now, 'noop' is not sorted and 'extra'
will be sorted as that module's widest supported type.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will set the stage for validating the types
referenced in the result union. For now, the parameter
representing that 'info' structure will remain unused.
[ and while we're at it, let us correct a faulty GET ]
[ macro in the diskstats header. that puppy missed a ]
[ parm which ain't so good if that guy is ever used! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit attempts to minimize the variety of types
currently used. Plus, the following were also changed:
. the MEM fields were switched to parallel the VM guys
. PIDS_MEM_VIRT -> PIDS_MEM_VIRT_PGS
. PIDS_MEM_VIRT_KIB -> PIDS_MEM_VIRT
. made NICE 's_int' so that it then parallels PRIORITY
. change RTPRIO & SCHED_CLASS from 'ul_int' to 's_int'
. removed Item_table 'oldflags' for an obsoleted field
. PIDS_WCHAN_ADDR
. added calculations like TICS_ALL_C for the following
. PIDS_TICS_USER_C
. PIDS_TICS_SYSTEM_C
. these three new 'TICS' fields have been incorporated
. PIDS_TICS_BLKIO - jiffies spent in block i/o
. PIDS_TICS_GUEST - jiffies spent as a guest
. PIDS_TICS_GUEST_C - as above, includes dead children
. that PIDS_TICS_DELTA was renamed PIDS_TICS_ALL_DELTA
( so it did not hide between TICS_BLKIO & TICS_GUEST )
( and to make clearer what's included: utime + stime )
. eliminated 'sl_int' entirely from that result struct
[ often, the <pids> module changes necessitated that ]
[ readproc header and source files had to change too ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
With this patch, all of the modules which offer a reap
function (pids, diskstats, slabinfo and stat too) will
now also provide for sorting whatever had been reaped.
It was easy to overlook a sort function for our <STAT>
guy given the paucity of CPUs on your typical personal
desktop or laptop. However, out in the world one might
find boxes with hundreds of CPUs plus many NUMA nodes.
Hey, who are we to disallow sorts on something another
person might see as useful under the above conditions?
And, there's always something to be said for symmetry.
[ of course, several minor tweaks were also included ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
. a more appropriate error return code was substituted
. a safer form of comparison is utilized in two places
. a STAT_VAL macro replaced by more proper MEMINFO_VAL
. several of the silly 'xerrx' formats had been missed
. a few whitespace changes have also been incorporated
Signed-off-by: Jim Warner <james.warner@comcast.net>
With this patch we've completed a progression toward a
standard approach to naming conventions which follows:
* Only functions will begin with that 'procps_' prefix
. ........................................... examples
. procps_vmstat_get ()
. procps_diskstats_select ()
- ----------------------------------------------------
* Exposed structures begin with the module/header name
. ........................................... examples
. struct pids_info
. struct stat_reaped
- ----------------------------------------------------
* Item enumerators begin like structs, but capitalized
. ........................................... examples
. VMSTAT_COMPACT_FAIL
. MEMINFO_DELTA_ACTIVE
[ slabinfo varies slightly due to some item variants ]
. SLABINFO_extra
. SLABS_SIZE_ACTIVE
. SLABNODE_OBJS_PER_SLAB
[ could cure with a prefix of SLABINFO, but too long ]
- ----------------------------------------------------
* Other enumerators work exactly like item enumerators
. ........................................... examples
. PIDS_SORT_ASCEND
. STAT_REAP_CPUS_AND_NODES
- ----------------------------------------------------
* Macros and constants begin just like the enumerators
. ........................................... examples
. #define SLABINFO_GET
. #define DISKSTATS_TYPE_DISK
- ----------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
Many of our item enumerator identifiers are very long,
especially in that <VMSTAT> module. Additionally, they
all contain the exact same universal 'PROCPS_' prefix.
The origins for this are likely found in the desire to
avoid name clashes with other potential include files.
But with procps-ng newlib, we've probably gone way too
far. Did 'PROCPS_PIDS_TICS_SYSTEM' actually offer more
protection against clash than 'PIDS_TICS_SYSTEM' does?
I don't think so. Besides, no matter how big that name
becomes, one can never guarantee they'll never be some
clash. And, conversely, extremely short names will not
always create conflict. Of course, in either case when
some clash occurs, one can always #undef that problem.
Thus, this commit will eliminate that 'PROCPS_' prefix
making all of those enum identifiers a little shorter.
And, we'll still be well above some ridiculously short
(criminally short) names found in some common headers:
- - - - - - - - - - <term.h>
- 'tab', 'TTY', etc
- - - - - - - - - - - - - - - - <search.h>
- 'ENTER', ENTRY', 'FIND', etc
------------------------------------------------------
Finally, with this as a last of the wholesale changes,
we will have established the naming conventions below:
. only functions will begin with that 'procps_' prefix
. exposed structures begin with the module/header name
. item enumerators begin like structs, but capitalized
. other enumerators work exactly like item enumerators
. macros and constants begin just like the enumerators
------------------------------------------------------
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch attempts to standardize the naming of those
most important (declared not defined) context structs.
The present practice represents a hodge podge of names
only some of which reflect the source /proc file name.
And 2 of those file names embed a literal 'info' which
is likely the origin of that required parm identifier.
Now we'll append a universal '_info' to such structure
names, while including the names of those /proc pseudo
files where possible. In any case, that context struct
will *always* begin with the actual module/header file
name. And only the following two sound a little weird!
---------> 'meminfo_info' + 'slabinfo_info' <---------
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will bring this interface up to our 3rd gen
standards. The following summarizes the major changes.
* New delta provisions have been added to most fields.
There are, of course, some fields for which a delta is
inappropriate. They include the identifying items such
as name, type, major and minor. Plus the io_inprogress
field which already acts, in effect, as a delta value.
* To provide delta support, dev_node historical values
have become persistent. By the same token, the library
must provide for future removal of disks/partitions. A
timestamp is used to detect 'stale' data which will be
deleted so as not to satisfy some get, select or reap.
* Such persistent support is provided by a linked list
which, by default, grows from the bottom down so as to
maintain compatibility with the /proc/diskstats order.
Initially, I was tempted to use the GNU tsearch (tree)
provisions until I discovered the overhead of building
that tree plus costs of a subsequent 'twalk'. Besides,
walking such a tree means retrieval order would differ
from an order required/expected by the vmstat program.
* The '/sys/block' directory is no longer scanned with
every refresh cycle. Rather, it's only accessed when a
node is first encountered. Then, that node's 'type' is
persistent for its lifetime like several other fields.
* A sort provision was included, at virtually no cost,
even though such a provision was not currently needed.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Where possible, libprocps files convey the name of the
actual source pseudo file under the '/proc' directory.
This brings diskstats into line with such an approach.
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ plus we also play catch up on some earlier changes ]
[ that impacted skill.c, after using --enable-skill! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
A collection of miscellaneous code and comment tweaks.
[ such changes will stop when desk checking ends too ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
That #define QUICK_THREADS was impossible to implement
under the new <pids> interface. Plus it was also found
to distort some thread information (referenced below).
So, it's always been inactive under the newlib branch.
However, it will (with small changes) still serve some
useful purpose in our library. Now, when the redefined
FALSE_THREADS is active, those special strings showing
"[ duplicate ENUM ]" will appear for any child thread.
Note: the real reason for such strings appearing isn't
being exercised, only their mechanics. In actual usage
they are substituted when a user duplicates such items
in a results stack & only the 1st instance can own it.
With this patch, we are simply fooling the <pids> code
into thinking an item was duplicated via a NULL value.
Reference(s):
. from master branch
commit 25a6ecdbfb
Signed-off-by: Jim Warner <james.warner@comcast.net>
Yes, all of these changes are strictly cosmetic. It is
likely symptomatic of some deep-seated character flaw.
[ or, it might be because of a certain pride in this ]
[ new library and the desire to make it even better! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Ever since their introduction, plus continuing through
several evolutions, both the meminfo and vmstat 'read'
functions employed a 'do while' loop for /proc access.
However, that loop construct was wrong since identical
tests were already done (twice!) within each loop body
itself, then accompanied by its own 'break' statement.
So, we will now transform them both into forever loops
which will help us to emphasize such break statements.
[ plus, let's return an error should nothing be read ]
[ lastly, eliminate 1 erroneous PROCPS_EXPORT prefix ]
Reference(s):
. original meminfo introduction
commit a20e88e4e7
. original vmstat introduction
commit a410e236ab
Signed-off-by: Jim Warner <james.warner@comcast.net>
The procps library attempts to work out the tty of a process
through several methods. For things like /dev/tty123 or
/dev/foo it works fine.
For tty devices that put the minor number in a directory
of the major name this fails. So then we have to fallback
to stating things like the processes STDERR and try again.
Considering a lot of processes sit on ttys such as
/dev/pts/3 this is a lot of wasted time. At the point of
entering driver_name we know "/dev/pts" and we know "3"
we just didn't join them up the right way as this is old
code.
This change now looks for /dev/pts/3 as well. It does it
after looking for /dev/pts3 so the behaviour is the same.
References:
https://bugs.debian.org/770215
Signed-off-by: Craig Small <csmall@enc.com.au>
This commit brings all of those 'fetch' type functions
(supporting some form of 'reap') into closer alignment
with one another. The biggest impact is to be found in
the <stat> module, which now provides for the separate
copy of stack pointers which will be exposed to users.
The reason such a copy was not employed initially with
<stat>, unlike those for <pids> and <slabinfo>, is due
to the fact that such stacks were never sortable. Thus
the original raw consolidated extent pointers wouldn't
have been disturbed. But that meant no NULL delimiter.
So with this commit, all reap/fetch operations now use
pointer copies when returning results to callers. And,
all such arrays are now NULL delimited meaning callers
can choose their own access fencepost: totals or NULL.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit will consolidate the three separate copies
of the item enumerators currently supporting that reap
function (summary, cpus & nodes) into one shared copy.
That select function will continue to maintain its own
dedicated items copy, albeit via a new item structure.
[ and while we're at it, we'll move the 'select' guy ]
[ to its proper alphabetical place, after our 'reap' ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Unlike other cached string fields (such as USER name),
that lxcname field was defined as 'const char *'. This
required a custom 'set' function using a cast in order
to avoid a compiler warning regarding that assignment.
So this commit brings lxcname into line with all those
other cached string fields. And while we're at it, the
reason some string fields have no 'freefunc' will also
be explained with some new comments in the Item_table.
Signed-off-by: Jim Warner <james.warner@comcast.net>
As those 3rd generation newlib APIs evolved so too did
the extents_free_all() function. Most versions of this
function required the callers to first verify that the
extents anchor wasn't empty, which was poor etiquette.
This simple function should have been much more robust
and forgiving. With this commit, it fnally becomes so.
Signed-off-by: Jim Warner <james.warner@comcast.net>
With all our 3rd generation interfaces, we're now well
positioned to preserve binary compatibility should new
fields be added to any public structure (assuming that
the 'result' union already contains its largest type).
This remains true even for the <pids> interface, which
unlike the others, has one structure embedded within a
separate struct rather than declaring a pointer to it.
The counts struct was positioned after the stacks ptrs
array so as to preserve that ABI if ever new ints were
added. Logically, however, the counts (especially that
total) should precede the stacks array if we wished to
properly place a horse (total) before a cart (stacks).
So to enable relocating those counts we will no longer
embed that structure, but provide a pointer to it. And
this will make accessing syntax feel more natural too.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch represents the partial revert of the commit
referenced below. And, so that yours truly (the author
for goodness sake) doesn't shoot his tootsies again in
the future, a cautionary programmer comment was added.
Reference(s):
commit dea4033418
Signed-off-by: Jim Warner <james.warner@comcast.net>
