There was a "buff[BUFFSIZE-1] = 0;" but there may be garbage between
what is read() (less than BUFFSIZE-1 bytes) and this null byte. Reuse
the construct from the preceding getrunners().
May happen if strlen(src) > INT_MAX for example. This patch prevents
escaped_copy() from increasing maxroom and returning -1 (= number of
bytes consumed in dst).
This solves several problems:
1/ outbuf[1] was written to, but not outbuf[0], which was left
uninitialized (well, SECURE_ESCAPE_ARGS() already fixes this, but do it
explicitly as well); we know it is safe to write one byte to outbuf,
because SECURE_ESCAPE_ARGS() guarantees it.
2/ If bytes was 1, the write to outbuf[1] was an off-by-one overflow.
3/ Do not call escape_str() with a 0 bufsize if bytes == overhead.
4/ Prevent various buffer overflows if bytes <= overhead.
Simply rearrange the old comparisons. The new comparisons are safe,
because we know from previous checks that:
1/ wlen > 0
2/ my_cells < *maxcells (also: my_cells >= 0 and *maxcells > 0)
3/ len > 1
4/ my_bytes+1 < bufsize (also: my_bytes >= 0 and bufsize > 0)
This should never happen, because wcwidth() is called only if iswprint()
returns nonzero. But belt-and-suspenders, and make it visually clear
(very important for the next patch).
The SECURE_ESCAPE_ARGS() macro solves several potential problems
(although we found no problematic calls to the escape*() functions in
procps's code-base, but had to thoroughly review every call; and this is
library code):
1/ off-by-one overflows if the size of the destination buffer is 0;
2/ buffer overflows if this size (or "maxroom") is negative;
3/ integer overflows (for example, "*maxcells+1");
4/ always null-terminate the destination buffer (unless its size is 0).
In the human_readable case; otherwise the strcat() that follows may
append bytes to the previous contents of buf.
Also, slightly enlarge buf, as it was a bit too tight.
Could also replace all sprintf()s with snprintf()s, but all the calls
here output a limited number of characters, so they should be safe.
Especially its "next" member: this is what caused the crash in "slabtop:
Reset slab_list if get_slabinfo() fails." (if parse_slabinfo*() fails in
sscanf(), for example, then curr is set to NULL but it is already linked
into the "list" and its "next" member was never initialized).
In proc/slab.c, functions parse_slabinfo20() and parse_slabinfo11(),
sscanf() might overflow curr->name, because "String input conversions
store a terminating null byte ('\0') to mark the end of the input; the
maximum field width does not include this terminator."
Add one byte to name[] for this terminator.
Otherwise this can truncate sizes on 64-bit platforms, and is one of the
reasons the integer overflows in file2strvec() are exploitable at all.
Also: catch potential integer overflow in xstrdup() (should never
happen, but better safe than sorry), and use memcpy() instead of
strcpy() (faster).
Warnings:
- in glibc, realloc(ptr, 0) is equivalent to free(ptr), but not here,
because of the ++size;
- here, xstrdup() can return NULL (if str is NULL), which goes against
the idea of the xalloc wrappers.
We were tempted to call exit() or xerrx() in those cases, but decided
against it, because it might break things in unexpected places; TODO?
This can disclose information from the stack, but is unlikely to have a
security impact in the context of the procps utilities:
user@debian:~$ w 2>&1 | xxd
00000000: a03c 79b7 1420 6661 696c 6564 2074 6f20 .<y.. failed to
00000010: 616c 6c6f 6361 7465 2033 3232 3137 3439 allocate 3221749
00000020: 3738 3020 6279 7465 7320 6f66 206d 656d 780 bytes of mem
00000030: 6f72 79 ory
Do not memleak "copy" in case of an error.
Do not use "sizeof(converted)" in snprintf(), since "converted" is a
"char *" (luckily, 8 >= sizeof(char *)). Also, remove "sizeof(char)"
which is guaranteed to be 1 by the C standard, and replace 8 with 12,
which is enough to hold any stringified int and does not consume more
memory (in both cases, the glibc malloc()ates a minimum-sized chunk).
sig.c had this odd logic where on non-Hurd systems it would undefine
SIGLOST. Fine for Hurd or amd64 Linux systems. Bad for a sparc which
has SIGLOST defined *and* is not Hurd.
Just check its defined, its much simpler.
The procio functions that were in the library have been
moved into sysctl. sysctl is not linked to libprocps in
newlib and none of the other procps binaries would need
to read/write large data to the procfs.
References:
be6b048a41
to be able to read and write large buffers below /proc.
The buffers and file offsets are handled dynamically
on the required buffer size at read, that is lseek(2)
is used to determine this size. Large buffers at
write are split at a delimeter into pieces and also
lseek(2) is used to write each of them.
Signed-off-by: Werner Fink <werner@suse.de>
Since the value of number_of_signals is known at compile time, we can
use a compile-time check instead. This also adds SIGLOST for the Hurd,
uses the correct signal counts for the Hurd and FreeBSD, and only gives
a compile-time warning when compiled on an unknown platform that it does
not know whether the number of signals is correct.
There is no longer justification for placing a typedef
employed in overriding that alloc.h message handler in
the procps.h header file. So this commit just moves it
to the alloc.h header file itself where's it's needed!
[ gosh, sure wish i had thought to relocate this guy ]
[ when the changes in the 1st commit shown were made ]
Reference(s):
. most recent related changes
commit 18e5aecd2b
. place where it *should* have been relocated
commit 2865ded64e
Signed-off-by: Jim Warner <james.warner@comcast.net>
Way back in November of 2011, the library was equipped
with an overridable error message handler function. It
was done expressly for a program like top which alters
the tty. But that support was withdrawn shortly after.
This was all done in the lead up to v3.3.2. That's the
release where NLS support was added and it represented
a hectic time. In hindsight, the changes went too far.
So this commit, in a minimal fashion, restores ability
to address a potential fatal library error. After all,
any properly behaving library would never unilaterally
subject a caller to a stderr message and then an exit.
[ when exposing 1 variable in libprocps.sym, 2 other ]
[ existing symbols were repositioned alphabetically. ]
Reference(s):
. generalized library memory provisions
commit 7126cc4491
. top exploit library memory provisions
commit 88087ec5a5
. library xalloc type functions made private
commit 2865ded64e
. restored prior top memory logic
commit 05f5deb97c
Signed-off-by: Jim Warner <james.warner@comcast.net>
When supplying the -p command to uptime, it does not display any
sections where the value is less than 1; however, after a reboot, this
causes the command to just output "up". Showing 0 minutes when the
system has been up for less than a minute makes it clear a reboot just
occurred.
The combined results of merge request #49 without that
overhead plus distortion in this repository's history.
Prototyped-by: Wayne Porter <wporter82@gmail.com>
In response to that suggestion referenced below, these
changes allow display of task/thread level NUMA nodes.
Currently, only the 'top' program offers any NUMA type
support and it is limited to the Summary Area display.
With this commit both the 'top' and 'ps' programs will
be able to display NUMA nodes associated with threads.
[ this patch has been adapted from the newlib branch ]
[ and implemented so as to preserve the existing ABI ]
Reference(s):
https://gitlab.com/procps-ng/procps/issues/58
Signed-off-by: Jim Warner <james.warner@comcast.net>
Reference(s):
proc/readproc.c: In function 'statm2proc'
proc/readproc.c:627:9: warning: variable 'num' set but not used [-Wunused-but-set-variable]
ps/output.c: In function 'pr_context':
ps/output.c:1273:14: warning: unused variable 'tried_load' [-Wunused-variable]
ps/output.c:1272:16: warning: unused variable 'ps_is_selinux_enabled' [-Wunused-variable]
ps/output.c:1272:16: warning: 'ps_is_selinux_enabled' defined but not used [-Wunused-variable]
ps/output.c:1273:14: warning: 'tried_load' defined but not used [-Wunused-variable]
ps/output.c:1837:18: warning: 'shortsort_array_count' defined but not used [-Wunused-const-variable=]
ps/output.c:1803:18: warning: 'aix_array_count' defined but not used [-Wunused-const-variable=]
ps/parser.c: In function 'arg_type':
ps/parser.c:1098:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
ps/parser.c:1099:34: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
ps/sortformat.c: In function 'format_parse':
ps/sortformat.c:241:1: warning: label 'out' defined but not used [-Wunused-label]
ps/stacktrace.c:176:13: warning: 'stack_trace_sigsegv' defined but not used [-Wunused-function]
watch.c: In function 'process_ansi':
watch.c:234:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
watch.c:237:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
Signed-off-by: Jim Warner <james.warner@comcast.net>
The commit (merge) referenced below added some useless
trailing whitespace, and this patch will correct such.
[ this also updates the NEWS file for the buglet fix ]
Gosh, if folks cannot coax their editors into avoiding
such crap they should remove the '.sample' suffix from
their '.git/hooks/pre-commit.sample' file. Thereafter,
git itself will reject changes with whitespace errors.
Reference(s):
commit cc1f49aeba
Signed-off-by: Jim Warner <james.warner@comcast.net>
In some environments, 100 * nr_active_objs is calculated at first,
and the result of lower 32bits is divided by nr_objs. This occurs
even in a 64-bit architecture. So nr_active_objes > 42949672, %use
will be incorrect.
This fix casts type of nr_active_objs to float to calculate
correctly the %use in 32-bit/64-bit architectures.
Signed-off-by: Takayuki Nagata <tnagata@redhat.com>
This reverts commit 99d71ad581.
When nr_active_objs / nr_objs is calculated, the result will be 1
or 0 since the variables are integer. So the commit is wrong.
kill -l SIGHUP (or any other signal-name prefixed with "SIG")
would cause free() to be called with a bad pointer instead of
a pointer to what was allocated. Fix this and add test-case.
FreeBSD doesn't have SIGPWR so makes no sense in warning and assuming
its 29.
References:
https://bugs.debian/org/832148
Signed-off-by: Craig Small <csmall@enc.com.au>
Profiling revealed a large amount of time spent in the
'escape_str_utf8' function (escape.c) with both of our
NLS branches (newlib and master). That same result was
not seen under an ancient top-3.2.8 program & library.
Well, the 3.2.8 result was ultimately explained by the
absence of a 'setlocale', necessary under NLS support.
Thus, when that ancient library tested for locale, all
it got was 'ANSI_...' & assumed 'UTF-8' wasn't active.
But after a hack to that ancient code to place it on a
par with newlib/master, I still found cost differences
that led me to revisit an old change referenced below.
It turns out that 'iswprint' costs far more than would
a call of 'isprint', even with the extra support code.
So this commit just reverts that five year old change.
[ this patch parallels a similar change under newlib ]
Reference(s):
commit 7b0fc19e9d
Signed-off-by: Jim Warner <james.warner@comcast.net>
Fixing invalid reads in find_elf_note due to setenv invocation
Resolves issue on mailing list from 12 Nov 2014 and Red Hat Bugzilla 1163404.
See merge request !20
For a specific slice of kernel versions we can get a better
estimate of the available memory before the "real" available
figure appears around kernel 3.2
However, that middle method requires a /proc/sys/vm directory.
FreeBSD 9.x used to emulate a < 2.6.27 kernel procfs meaning
it never tried the middle method. FreeBSD 10.x emulates something
more modern, but without the available figure and without a
/proc/sys/vm, so the library falls into a hole.
Hurd may to one day have this bug so we'll exclude him as well
as its triggered by whatever number appears in
/proc/sys/kernel/osrelease
References:
commit 3f3b1a59adhttps://bugs.debian.org/831396
For this release, what's likely to be our last oldlib,
we really no longer care when top or ps threads access
is made a little less efficient. This is especially so
when efficiency was gained at the expense of accuracy.
The newlib branch already has turned off QUICK_THREADS
so this patch just brings the master branch into line.
Reference(s):
https://bugzilla.redhat.com/show_bug.cgi?id=1284091
Signed-off-by: Jim Warner <james.warner@comcast.net>
