This change involves the Fields Management logic only.
With user position being maintained after signals, the
previous algorithm unfortunately used Cap_clr_eos with
each iteration of the loop. The screen flicker invited
with that choice was not apparent under all emulators.
With this commit, clearing to end-of-screen has become
conditional on whether or not there was a true resize.
(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)
Reference(s):
commit ba9092ad83
Signed-off-by: Jim Warner <james.warner@comcast.net>
Prior to this commit, top has always taken the easiest
(safest?) approach when dealing with those troublesome
SIGWINCH interrupts. Whenever the user was on a screen
other than the main display, any signal received would
force an immediate exit, returning to the main screen.
With these changes, top will retain the user's current
position regardless of what screen he/she was viewing.
In support the following additional changes were made:
* the initial help screen requires an explicit end key
` not 'any other key' formerly used to request an exit
* the colors mapping screen instructions were improved
* ^Z response was made immediate, eliminating the flag
* the sigaction's SA_RESTART flag had to be eliminated
* sigprocmask logic was normailize to the bare minimum
* the POSIX.1-2004 async-signal safe functions used in
` the signal handlers were acknowledged and documented
(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)
Reference(s):
http://www.freelists.org/post/procps/unwanted-topinspect-window-enclosure-with-the-terminal-size-change
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just addresses the following minor issues:
. restored both lost end-of-job reporting capabilities
. added missing initializers to the DEF_RCFILE #define
. added 'nls_maybe' eye-catcher to the 'Scaled_sfxtab'
. removed a now superfluous 'READMINSZ' assertion test
. man document references to 'top' are more consistent
(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit is an unrequested outgrowth of the earlier
change dealing with summary area memory field scaling.
That user selectable scaling provision is now extended
to include 6 (at present) task oriented memory fields.
The new companion 'e' (lower case) interactive command
has been added and, like the 'E' command, it can cycle
each of the currently displayed memory columns between
KiB through TiB. There are, however, some differences.
Where '+' indicates summary area truncation at a given
radix, task memory fields are automatically scaled for
their column. Thus, not all rows use the same scaling.
And, while summary area field widths were not changed,
the task memory columns were widened in order to offer
more meaningful data when the radix was increased. The
precision is automatically increased in step with each
radix: MiB displays 2 decimal places, GiB 3 and TiB 4.
To compliment that additional precision, both the %CPU
and %MEM fields were widened by 1 column and now offer
precision up to 3 decimal places. But, unique to %CPU,
widening could already have occurred due to the number
of processors in some massively parallel boxes. At any
rate, total extra width for both memory and percentage
fields could amount to twenty (precious) columns more.
So for both the memory and % fields the original width
(along with loss of precision) can be restored via new
compiler conditionals which this commit also provides.
p.s. and it will be rcfile preserved for any restarts!
(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)
Reference(s):
http://www.freelists.org/post/procps/top-regression-reports
Signed-off-by: Jim Warner <james.warner@comcast.net>
Earlier this year, the switch from KiB to Mib as shown
in top's summary area was postponed to those occasions
when KiB exceeded 8 digits. In hindsight that may have
moved top in the wrong direction, given the difficulty
of digesting such large numbers of digits at a glance.
This commit adds a new 'E' interactive command used to
cycle the displayed memory amounts ranging from KiB to
TiB. Thus, users can choose the radix they wish shown.
p.s. and it will be rcfile preserved for any restarts!
(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)
Reference(s):
http://www.freelists.org/post/procps/top-regression-reports
commit 95f2201730
Author: James Cloos <cloos@jhcloos.com>
Date: Mon Feb 6 00:00:00 2012 -0500
Signed-off-by: Jim Warner <james.warner@comcast.net>
When 'type' was added to the alternate status line for
the '=' key, the need for the demonstration 'type' was
overlooked. This commit avoids the '(null)' potential.
(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)
Reference(s);
commit 3b2b9a95e6
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit extends Inspect provisions for 'find/next'
to each individual selection. Thus a user can maintain
multiple active searches without having to reissue the
locate command whenever the current selection changes.
To emphasize this feature the View screen now displays
the current active locate string or 'N/A' if inactive.
Such a reminder is important when no found matches are
present on the 1st display page, given that they would
otherwise be apparent via the additional highlighting.
(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)
Signed-off-by: Jim Warner <james.warner@comcast.net>
Previously top would warn users if an older version of
an rcfile was about to be overwritten. That's assuming
that RCFILE_NOERR was not defined. This left, however,
other potential rcfile issues or questions unattended.
For example, if a faulty 'inspect' redirected echo had
overwritten all window entries or if the inspect entry
was not 'pipe' or 'file' (actually, just a 'p' or 'f')
then top would silently accept it but look no further.
With this commit top will try to process every inspect
entry, while preserving unrecognized entries. Plus all
other non-fatal rcfile errors will now alert a user to
the potential overwrite when the 'W' command is given.
(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit introduces an extremely powerful, flexible
brand new capability. Now, users can pause the normal
iterative display and inspect the contents of any file
or output from any script, command, or even pipelines.
It's invoked via the 'Y' interactive command which, in
turn, is supported with simple user supplied additions
as new entries in the top personal configuration file.
A separate new 'Inspect' window supports scrolling and
searching, similar to the main top display. Except it
extends existing 'L'/'&' (locate/locate-next) commands
so that an out-of-view match automatically adjusts the
horizontal position bringing such data into view. And
it provides for multiple successive same line matches.
Also, the basic 'more/less' navigation keys are active
in this new 'Inspect' window, to ease user transition.
There are no program changes required when entries are
added to or deleted from the rcfile. And there are no
known limits to the complexity of a script, command or
pipeline, other than the unidirectional nature imposed
by the 'popen' function call which top cannot violate.
Since it's impossible to predict exactly what contents
will be generated, top treats all output as raw binary
data. Any control characters display in '^C' notation
while all other unprintable characters show as '<AB>'.
The biggest problem encountered was with the find/next
capability since that strstr guy was really diminished
given the possibility that numerous 'strings' could be
encountered *within* many of top's raw, binary 'rows'.
Oh, and another problem was in maintaining the perfect
left & right text justification of this commit message
along with all of the commit summaries. Some of those
summaries (like this very one) are of course, slightly
shorter, to make room for the 'man document' addition.
Enjoy!
Signed-off-by: Jim Warner <james.warner@comcast.net>
As an aid to the above 2 commands, and as a prelude to
an upcoming 'inspect other output' capability, the act
of selecting a process for either has been simplified.
Positioning a task as the first one displayed, via the
up/down arrow keys, will now establish it as a default
selection for the appropriate command. Thus, that pid
will then be incorporated in a subsequent input prompt.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The recent introduction of a column widths override
(the 'X' command) provided for a user input amount
to be added to default field size which ranged from
5 to 10 bytes.
While that approach could prevent truncated data, the
different default sizes would almost certainly mean
some precious screen real estate was waisted.
This commit introduces the concept of dynamic widths
where top will add only enough to a field default to
prevent truncation for that specific field.
Now users have a choice between their explicit width
override or a width chosen by top to exactly match
display needs. The former is immediate but likely
wastes some horizontal space while the latter is
iterative but will be sized precisely.
Original 'X' Command:
commit 384afa494a
commit 47e1d063ac
Extensions to 'X' Command:
commit bbf8e44fb4
commit 7557f3f754
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit accommodates those fields which may have
suffered truncation due to these default limits:
. 5 digits for uid/gid type fields
. 8 characters for user/group type fields
With a new interactive command, users can increase the
width of all such fields, or return to the defaults.
Note:
There are no restrictions on the amount added to
the defaults. The user is free to vastly exceed
screen limits which simply means such fields can
never be displayed.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit affords user control over justification
for both column headings and the subordinate data.
Separate toggles are provided for control of numeric
data and string data.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Now that column headings are independent of column
data format and require no carefully managed padding
bytes they are candidates for nls translation.
This commit migrates all column headings to the .pot
file with additional translator guidance in the form
of maximum sizes to avoid truncation.
It also places these new additions adjacent to their
associated descriptions, which were already present.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The recent introduction of scrollable variable width
columns makes a process 'environment' a potentially
useful addition to top's displayable fields.
This commit exploits the following new library flag:
PROC_EDITENVRCVT
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the introduction of intra-column scrolling, the
scroll coordinates message was enhanced to give some
hint of positioning within a scrolled column.
Rather than rebuild this somewhat costly string from
scratch with each frame, we'll now do the bulk of the
work only when column headers are constructed.
The only remaining per frame costs will then be the
addition of a few terminfo escapes and the current
Frame_maxtask count.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Admittedly, top referred to memory quantities in
a variety of non-standard ways. This commit brings
the program and supporting documentation into strict
compliance with IEC standard binary names.
According to wikipedia, as of 2012 this IEC standard
was still not in widespread use. However, I'm making
this change now for the anal-retentive among us.
Reference:
http://en.wikipedia.org/wiki/Megabyte
Reported by: Roman Mamedov <rm@romanrm.ru>
Bug-Debian: http://bugs.debian.org/662786
Signed-off-by: Jim Warner <james.warner@comcast.net>
At one time, new top silently defaulted when an rcfile
was found to be incompatible. This is exactly what
the old top did. However, after some discussion it
was decided top should alert the user and thereby
save the system administrator some headaches.
Now, some are upset over the fatal error, proving you
can't please everybody. But in all fairness, given
the difficulty of customizing old top, any reluctance
to delete an old saved rcfile is understandable.
To ease transition to this new top, old style rcfiles
will now be honored and converted to the new format.
And if not disabled at ./configure time via CFLAGS,
a user will be warned when an old style rcfile is
about to be overwritten using the 'W' command.
Lastly, the config validation logic was enhanced to
help ensure both types of rcfile haven't been edited
manually and possibly made unuseable.
Reported-By: sergio <mailbox@sergio.spb.ru>
Bug-Debian: http://bugs.debian.org/651213
Reported-By: martin f krafft <madduck@debian.org>
Bug-Debian: http://bugs.debian.org/651863
Signed-off-by: Jim Warner <james.warner@comcast.net>
The gettext documentation leads one to believe that
a printf type call is necessary for gettext string
extraction. That turns out to be misleading and
all one really needs is the runtime gettext string
address resolution.
Thus, we can avoid our original snprintf/strdup
overhead and establish an address for the original
or translated string just by issuing the _() macro.
We create these nls string tables so that:
1) top avoids the overhead of repeated
runtime function calls
2) we can control the order of top's
strings in the .pot file
3) translator comments don't obscure
and clutter the main program
Until this patch, top had used some strings with
special escape sequences to produce colors, normal
text, bold text, etc. They took the following form,
explained by an excerpt from program comments:
...
Our special formatting consists of:
"some text <_delimiter_> some more text <_delimiter_>...\n"
Where <_delimiter_> is a single byte in the range of:
\001 through \010 (in decimalizee, 1 - 8)
and is used to select an 'attribute' from a capabilities table
which is then applied to the *preceding* substring.
...
Unfortunately, these nonprinting values revealed
insurmountable inconsistencies in both the front-end
and back-end translation tools.
The xgettext (extraction) program would take those
special escapes, convert them and then output raw
binary values. Thus the .pot file would contain
lots of unprintable stuff making it unreadable.
If the following was added to po/Makevars, most of
those special escapes would be preserved in their
escape notation:
XGETTEXT_OPTIONS = ... --escape
But two escapes were converted from octal notation
and there was no way to prevent it:
\007 --> \a
\010 --> \b
After a pass through the msginit program, most of
the escapes were reconverted to raw binary values
making translation impossible. There was no
"--escape" option for the back-end programs like
there was for xgettext.
But the real killer was the escape \004, also used
in some of top's special strings. This value would
be silently accepted by xgettext, only to produce
the following fatal error in back-end programs like
msginit, msgfmt and msgen:
.pot:2647: context separator <EOT> within string
To quote from one of the references below:
"Would you create a suite of tools that silently
allow what is destined to become a fatal error
to pass unnoticed?"
So the bottom line was: top's special strings, in
use for the past nine years, had to be redesigned.
References:
http://www.freelists.org/post/procps/procpsng-nls-support,11http://www.freelists.org/post/procps/procpsng-nls-support,14
summary of changes:
. adopted relative paths to 'include' and 'proc'
dirs so that stand alone compiles are made
easier and no one need guess their locations
. corrected several names for enums and macro
usage reflecting fmt vs. txt
. expanded all octal escape sequences to a full
3 digits since one already required 3 digits
. finalized translator hints (for now)
programming note:
as an aside, by not including an argument for
the gettext --add-comments, any preceeding c
style comment will be propagated to the .pot
file, if the gettext macro isn't empty.
/* Need Not Say 'TRANSLATORS' ...
snprintf(buf, sizeof(buf), "%s", _( // unseen
/* Translator Hint: ...
snprintf(buf, sizeof(buf), "%s", _("" // seen
