Commit Graph

235 Commits

Author SHA1 Message Date
Jim Warner
c409f5a433 top: address the argument parsing quirk involving '-h'
There exists the possibility that a 'putp' call can be
issued before the 'setupterm' invocation has occurred,
as is reflected in a bugzilla report referenced below.

Strangely, such a SEGV isn't always triggered as logic
would suggest it ought to be. I experienced a fault in
these environments with the associated curses version:
. archlinux, procps-ng 3.3.12, ncurses 6.0.20170429
. fedora-25, procps-ng 3.3.10, ncurses 6.0.20160709
. opensuse-42.2, procps-ng 3.3.9, ncurses 5.9.20140201
. gentoo, procps-ng 3.3.12, ncurses 6.0.20150808
. slackw-14.2, procps-ng 3.3.12, ncurses 6.0.20160910

Whereas under these environments there was no problem:
. ubuntu-17.04, procps-ng 3.3.12, ncurses 6.0.20160625
. debian-test, procps-ng 3.3.12, ncurses 6.0.20161126
. mageia-5.1, procps-ng 3.3.9, ncurses 5.9.20140323

[ as an aside, the expected result in the bug report ]
[ is incorrect and should mention the '1' parameter. ]

[ however, until release 3.3.13 when the '1' becomes ]
[ a valid switch, numbers are not detected when used ]
[ with any switch which doesn't require an argument. ]

[ you're welcome to treat that as a separate bugglet ]

Reference(s):
https://bugzilla.redhat.com/show_bug.cgi?id=1450429

Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-05-22 21:34:38 +10:00
Jim Warner
292bd233f2 NEWS: update/alphabetize enhancements for next release
Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-05-22 21:34:32 +10:00
Jim Warner
89db82d143 top: provide -1 command line switch as 'Cpu(s)' toggle
If built without ./configure --disable-modern-top, the
program displays each cpu individually providing there
is sufficient vertical screen real estate. For massive
SMP environments this will necessitate use of a config
file where the cpu summary toggle ('1') could be saved
via the 'W' command. But, an rcfile may not be viable.

So this commit introduces a '1' command line switch to
emulate exactly the effects of the interactive toggle.

And since it is our first numeric switch some existing
parsing logic had to be changed slightly. Such changes
are, in truth, an improvement. For example, instead of
seeing "inappropriate '2'" with ./top -2 we'll now see
the vastly more appropriate error "unknown option '2'.

References(s):
https://gitlab.com/procps-ng/procps/issues/55

Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-03-16 21:59:53 +11:00
Jim Warner
fb48b5d9fb top: provide -E command line switch for memory scaling
In their 3.2.7 version of top, Redhat introduced an -M
switch to automatically scale Summary Area memory data
to avoid truncation (and the resulting '+' indicator).

The procps-ng top does not employ suffixes with memory
data nor does it allow for different scaling with each
separate value. Rather, scaling appears at line start.

If built without ./configure --disable-modern-top, the
Summary Area memory will be scaled at GiB which should
lessen chance of truncation. Otherwise KiB was used to
reflect such memory, increasing the truncation chance.

And while 'W' can be used to preserve some appropriate
scaling value, there are arguments against such rcfile
approaches as cited in the issue and bug report below.

So this commit will bump the Summary Area memory scale
factor from KiB to MiB when using --disable-modern-top
as a concession to that Redhat bug report noted below.

And it also introduces a new command line switch which
can force any desired scaling regardless of the rcfile
or which ./configure option might have been specified.

[ for top's help text we'll show 'E' as if it were a ]
[ switch without arguments in order to keep the help ]
[ text displayable without wrap in an 80x24 terminal ]

[ the man page, however, will show all k-e arguments ]

Reference(s):
https://gitlab.com/procps-ng/procps/issues/53
https://bugzilla.redhat.com/show_bug.cgi?id=1034466

Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-03-16 21:59:53 +11:00
Jim Warner
fe6e03d8a9 top: show fewer decimal places for memory (by default)
After much reflection I've come to the conclusion that
displaying 3 decimal places (usually) when memory data
had been scaled is no longer optimal with today's ever
increasing amounts. And given that not all task memory
fields are the same widths, inconsistencies can easily
arise as illustrated and discussed in the issue below.

Instead of unilaterally reducing the number of decimal
places, this commit will sneak in such a change via an
existing configure option that was very likely unused.

The former 'disable-wide-memory' option has now become
'enable-wide-memory', which can be used if the current
behavior (3 decimal places) is preferred. Without that
option, whenever memory is scaled beyond KiB, just one
decimal place will be shown in Summary and Task areas.

And Task area field width will no longer be changed by
this revised configure option. Instead, all such field
widths will now be fixed at the former maximum values.

Reference(s):
https://gitlab.com/procps-ng/procps/issues/50

Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-03-16 21:59:53 +11:00
Craig Small
536cea324b kill: -l space between name parses correctly
kill -lHUP would work correctly, but kill -l HUP would not.

The list option in kill was hit by a quirk of getopt_long where an
option with an optional argument would not attempt to get the argument
beyond the space, even though a mandatory argument would do that.

The fix is a kludge to scan to the next argument and if it looks
like something we can use, use it. Lucky for us, the list option is
one where parsing can stop immediately.

Thanks to Brian Vandenberg for the way forward.

References:
 http://stackoverflow.com/questions/1052746/getopt-does-not-parse-optional-arguments-to-parameters
 https://bugs.debian.org/854407
2017-02-07 22:05:18 +11:00
Craig Small
625d0809da pkill: Return 0 if successfully killed process
Original report:
When trying kill a process with insufficient privileges (see blow),
pkill displays the error message “... failed: Operation not permitted”,
but returns 0. Surely it should return 3?

$ pkill syslogd ; echo $?
pkill: killing pid 373 failed: Operation not permitted
0

Return value 0 means one of more things matched. For a pgrep (which
shares code with pkill) this makes sense, there was a match. It seems
wrong for pkill to return 0 when it in fact could not do what you told
it to.  However return value 3 means a fatal error and it's not fatal.

Looking at other programs when trying to kill things it cannot kill.
shell kill returns 1, procps kill returns 1, killall returns 1, skill
returns 0 (and says it was successful!, ah well poor old skill)

The consensus seems to be that you return 1 if you cannot kill it, even
if you found it. In other words the return value for both not found and
not able to kill it is the same.

pkill only returns 0 if something was killed. This means we found a
match AND the kill() system call worked too.

References:
 https://bugs.debian.org/852758

Signed-off-by: Craig Small <csmall@enc.com.au>
2017-02-04 11:44:01 +11:00
Craig Small
1fb3731357 NEWS: Very minor typo fixed
Signed-off-by: Craig Small <csmall@enc.com.au>
2017-02-04 11:06:02 +11:00
Jim Warner
a4f93b6dc5 NEWS: updated with the two most recent program changes
[ in addition to program changes, this file has been ]
[ made to agree with that NEWS file under our newlib ]
[ branch since some entries were ordered differently ]
[ due to differences in the order of actual commits. ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2017-02-04 11:05:13 +11:00
Jim Warner
da9f31ef3e ps: now made responsive to 32 or 64-bit address widths
While a Debian bug report referenced below was limited
to the 'eip' and 'esp' fields, this patch also extends
address width adaptations to some other addresses too.

[ and, we do so in a far less invasive manner than a ]
[ redhat approach shown below adding two new fields! ]

Reference(s):
. new debian bug report
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=846361
. old redhat solution
https://bugzilla.redhat.com/show_bug.cgi?id=244152

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-12-07 21:51:06 +11:00
Jim Warner
dc8e89119a misc: remove some trailing whitespace newly introduced
The commit (merge) referenced below added some useless
trailing whitespace, and this patch will correct such.

[ this also updates the NEWS file for the buglet fix ]

Gosh, if folks cannot coax their editors into avoiding
such crap they should remove the '.sample' suffix from
their '.git/hooks/pre-commit.sample' file. Thereafter,
git itself will reject changes with whitespace errors.

Reference(s):
commit cc1f49aeba

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-12-07 21:50:59 +11:00
Jim Warner
18b1a887b7 top: finally circumvent that minor libnuma memory leak
Still unhappy with a minor memory leak associated with
libnuma, I experimented with omitting the dlclose that
was issued at module's end. For some reason which will
remain a mystery, the valgrind leak then went bye-bye.

So this patch just omits one use of dlclose and relies
on whatever kernel magic is at work to free the memory
when each process ends. We kept, however, the original
code (now commented-out) to serve as a future caution.

There remains one potential (but unlikely) dlclose use
near the original dlopen. But there will be no leak as
that 'numa_node_of_cpu' will not yet have been called.
This seems to be the culprit that triggers such leaks.

None of this libnuma shit would likely have come close
to hitting our fan had the numa developers provided us
with 'new' and 'unref' functions like our newlib does.

[ this commit parallels a patch in our newlib branch ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-09-18 20:39:12 +10:00
Jim Warner
b899c55dca pmap: fix printing bug associated with the '-x' option
Ever since its introduction, the 'x' (extended format)
option has employed strncmp to parse those smaps keys.

Such an approach worked well as long as those prefixes
were guaranteed to be unique. But, with the 4.3 kernel
a new 'SwapPss' field was added to those within smaps.

That triggered a 2nd match for the 'Swap' logic which,
in turn, resulted in a duplicate output line of zeros.

So this patch just trades strncmp for strcmp, avoiding
potential future problems when /proc/$$/smaps evolves.

Reference(s):
. recent bug report
https://bugzilla.redhat.com/show_bug.cgi?id=1374061
. linux 4.3 kernel introduces SwapPss
commit 8334b96221ff0dcbde4873d31eb4d84774ed8ed4
. original pmap -x option introduction
commit 380cc1e908

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-09-11 09:21:44 +10:00
Jon Boden
8abd0c92ab library: Don't use SIGPWR on FreeBSD
FreeBSD doesn't have SIGPWR so makes no sense in warning and assuming
its 29.

References:
 https://bugs.debian/org/832148

Signed-off-by: Craig Small <csmall@enc.com.au>
2016-08-28 19:14:32 +10:00
Craig Small
2e4959bab8 library: dont use vm_min_free on non-Linux systems
For a specific slice of kernel versions we can get a better
estimate of the available memory before the "real" available
figure appears around kernel 3.2

However, that middle method requires a /proc/sys/vm directory.
FreeBSD 9.x used to emulate a < 2.6.27 kernel procfs meaning
it never tried the middle method. FreeBSD 10.x emulates something
more modern, but without the available figure and without a
/proc/sys/vm, so the library falls into a hole.

Hurd may to one day have this bug so we'll exclude him as well
as its triggered by whatever number appears in
/proc/sys/kernel/osrelease

References:
 commit 3f3b1a59ad
 https://bugs.debian.org/831396
2016-07-17 09:06:24 +10:00
Craig Small
e564ddcb01 watch: define HOST_NAME_MAX
Those infernal arches of kfreebsd-i386 (not -amd64) don't define
HOST_NAME_MAX. This patch is a work-around for those systems with
lacking include files.
2016-07-11 08:41:21 +10:00
Craig Small
96f151a4f8 6:0:0 lbirary API bump 2016-07-10 08:55:45 +10:00
Craig Small
9069db6c5d misc: Add note for Debian bug about ANSI 2016-07-10 07:59:20 +10:00
Jim Warner
c69b02438f NEWS: update (and reorganize) with accumulated changes
For what could be our last oldlib release, why not try
to make the NEWS a little more readable. So, it's been
reorganized by category and bug fixes were out-dented.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2016-07-09 13:23:27 +10:00
Craig Small
1310a76848 watch,free: interpet intervals in non-locale way
Both watch and free used the locale to determine the required delay
interval for subsequent updates. It's preferable to not care about
locale and accept both 12.34 and 12,34 as meaning 12 seconds and
340 microseconds.

References:
 https://bugs.debian.org/692113

Signed-off-by: Craig Small <csmall@enc.com.au>
2016-07-03 16:14:36 +10:00
Simon Tatham
365cb37029 library: find tty device name of process quicker
The procps library attempts to work out the tty of a process
through several methods. For things like /dev/tty123 or
/dev/foo it works fine.

For tty devices that put the minor number in a directory
of the major name this fails. So then we have to fallback
to stating things like the processes STDERR and try again.

Considering a lot of processes sit on ttys such as
/dev/pts/3 this is a lot of wasted time. At the point of
entering driver_name we know "/dev/pts" and we know "3"
we just didn't join them up the right way as this is old
code.

This change now looks for /dev/pts/3 as well. It does it
after looking for /dev/pts3 so the behaviour is the same.

References:
 https://bugs.debian.org/770215

Signed-off-by: Craig Small <csmall@enc.com.au>
2016-07-03 10:08:18 +10:00
Jesse Hathaway
94054e7e96 watch: Add hostname to the header
watch has the hostname added to the header so you know what device
if you have many it is running on.

Signed-off-by: Craig Small <csmall@enc.com.au>
2016-07-02 15:45:36 +10:00
Craig Small
07642b8ea6 kill: report error if cannot kill process
Shell kill would report a problem if you tried to kill a process
while procps kill was silent. This meant it looked like kill worked
when it actually failed.

References:
 https://bugs.debian.org/733172
2016-07-02 12:25:14 +10:00
Craig Small
3f5b75035e pidof: check cmd if space in argv0
A difference in behaviour between the sysvinit and procps pidof
was that the procps one would sometimes not find process that
the sysvinit one did.

The difference is that if a space is found in argv[0] then sysvinit
would look at cmd for a match. This isn't perfect and more of a
best guess but does often work.

procps pidof now follows the same "standard". The most obvious
difference is with kde based processes and incoming ssh connections
with sshd.

References:
 GitLab issue #4
 https://gitlab.com/procps-ng/procps/issues/4
 https://github.com/limingth/sysvinit/blob/master/sysvinit-2.88dsf/src/killall5.c#L800
2016-04-17 16:43:26 +10:00
Craig Small
aa9bd38d0a tests: Conditionally add prctl to test process
prctl was already bypassed on Cygwin systems. This extends to
non-Linux systems such as kFreeBSD and Hurd.

References:
 https://bugs.debian.org/816237
2016-04-17 09:09:41 +10:00
Laurent Bigonville
5da390422d ps: use attr/current as fallback for context
If SELINUX is enabled but the machine is using another MAC system
(like apparmor), ps will fallback to just parsing
"/proc/%d/attr/current", otherwise the label/context would not
be properly displayed in that case.

References:
 https://bugs.debian.org/786956

Signed-off-by: Craig Small <csmall@enc.com.au>
2016-01-03 18:13:47 +11:00
Craig Small
0ee090ae16 ps: display control group name
The cgroup field while shown as a vector is a concatenated
string, so alot of the complexity of sorting and displaying
has gone.

This change simplifies the cgroup sorting and adds display
and sorting for the name attribute of the cgroup, if found.

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-15 17:10:38 +10:00
Craig Small
4bd0e539af ps: sort by cgroup
A rather small fix to sort by cgroup. This sorting function
could be used for other string vector entries, but I can't
see why you want to for, say, environment.

Reference:
 https://bugs.debian.org/692279

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-15 16:23:37 +10:00
Craig Small
e3d9ee04d9 Update NEWS for next version 2015-08-15 15:42:40 +10:00
Craig Small
de985eced5 RELEASE 3.3.11
Update NEWS file to number this release.

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-09 17:54:49 +10:00
Craig Small
57396ae39d build-sys: Update Library Version
procps v3.3.11 will bring Library API 5:0:0
The reason for the change is the removal of some calls and
the addition of others. The newlib branch should hopefully
reset some of these changes to a much slower pace.

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-09 17:45:19 +10:00
Craig Small
fd007d6d1d free: Parse -s option correctly.
If the -s option was the first option on the command line, free
would report seconds argument failed. This only appeared on the
Debian free, not the one in git.

Closer examination revealed that if a valid float string is
given to strtof() it doesn't set errno to 0, but just leaves it
alone. As we are explicitly testing errno for overflows, this
means the previous errno change is picked up here.

The simple answer is to set errno to 0 before calling strtof().

References:
 https://bugs.debian/org/733758
 https://enc.com.au/2015/08/08/be-careful-with-errno/
2015-08-08 21:04:01 +10:00
Craig Small
1f67b7dc71 Add notice in news about vmstat 2015-08-08 17:14:36 +10:00
Jim Warner
b4923fa745 miscellaneous: a final cleanup prior to release 3.3.11
This patch just eliminates some eol whitespace, adds a
missing eof newline and contributes yet one additional
entry to the NEWS summary regarding saved top rcfiles.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-08-08 16:56:50 +10:00
Craig Small
e54b372498 Update NEWS entry 2015-08-06 22:35:02 +10:00
Craig Small
313f936739 ps: enable sort by etimes
ps has two columns showing the same data which is elapsed time, just
the format is changed:
 etimes - elapsed time in seconds
 etime  - elapsed time in DD-hh:mm:ss

ps used to only sort by etime but not etimes, by making etimes
and alias of etime for sorting both flags work.

References:
 https://bugs.debian.org/794619

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-08-06 22:08:13 +10:00
Craig Small
96dc43d72b Changed git site to gitlab 2015-05-10 14:57:50 +10:00
Craig Small
92071e963e pmap: print process even if smaps unreadable
pmap would previously print the process name if
/proc/PID/smaps could be opened, even if subsequent
reads failed.  This actually occurs with other users
PIDs.

Kernel 3.18rc1 introduced a change where the file could
not been opened, meaning pmap -X 1 previously showed
the process name and nothing else but NOW shows nothing
make check failed because of this.

This change prints the process name even before trying to open
the file, returning it to previous behaviour.
Thanks to Vincent Bernat for some analysis.

References:
  https://bugs.debian.org/775624
  https://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?id=29a40ace841cba9b661711f042d1821cdc4ad47c

Signed-off-by: Craig Small <csmall@enc.com.au>
2015-01-24 18:53:29 +11:00
Craig Small
7610b3128e skill: fix command line with signal
If skill was used with a signal number then it would intepret
the command line with last option interpreted twice. This often
confused the program so it just would end up killing nothing.
So this would work:
skill -t pts/0
This would not:
skill -9 -t pts/0

The kill path (in the same file) uses the same logic that has
been introduced here.

References: https://www.freelists.org/post/procps/skill-command-does-not-work-in-debian-7-releases

    Signed-off-by: Craig Small <csmall@enc.com.au>
2015-01-24 17:11:11 +11:00
Craig Small
fc7cb8dd4c Update NEWS with merge 33
Signed-off-by: Craig Small <csmall@enc.com.au>
2014-12-03 22:41:17 +11:00
Jaromir Capik
60660219b8 NEWS: adding enhanced ANSI support in watch 2014-09-09 18:13:23 +02:00
Jim Warner
fd71717b9b NEWS: add a few more for the release 3.3.10 change log
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-08-08 22:14:21 +02:00
Jim Warner
bcbc3c5a02 misc: result after checking all files for misspellings
Reference(s):
https://github.com/lyda/misspell-check.git

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-08-08 22:14:21 +02:00
Jim Warner
8ef6cd91fc top: retire old stale startup defaults in favor of new
For over a decade top has used a startup configuration
mimicking the original redhat top. This decision dates
back to when the forked Sourceforge version was trying
to win over users in battles with that ancient kludge.

Will anybody deny that those defaults are coyote ugly?

Well, it is time that top presented a more modern look
at startup, providing that no saved rcfile exists. But
just in case some distro prefers that old, comfortable
look, there's the '--disable-modern-top' build option.

[ Pssst. With the widened memory fields it turns out ]
[ the 'Mem' default window had become almost useless ]
[ on an 80x24 terminal since %CPU & COMMAND were out ]
[ of view. So some other defaults were tweaked a bit ]
[ whether or not --disable-modern-top was specified. ]

Reference(s)
http://www.freelists.org/post/procps/tops-graph-mode-saga-continues,3

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-01 21:30:46 +10:00
Jim Warner
2199af404a top: maximize recent locale aware numeric enhancements
When startup argument parsing was recently enhanced to
account for LC_NUMERIC settings, some user input logic
dealing with numbers fails to exploit that capability.

This patch extends such enhancements to a running top.

Reference(s):
commit f7b84f45c7
http://www.freelists.org/post/procps/topwatch-floating-point-input,2

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-01 21:30:45 +10:00
Jim Warner
ff7af8d982 NEWS: update with accumulated changes for next release
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-22 21:39:55 +10:00
Craig Small
d06aaaaf2b ps: ignore SIGCONT
SIGCONT is a continue signal.  It seems that some zsh setups can send
this signal, causing ps to abort.  This is not what "continue" means.
This change just uses the default handler which will continue a stopped
process.

References:
  http://bugs.debian.org/732410
  http://www.zsh.org/cgi-bin/mla/redirect?WORKERNUMBER=32251

Signed-off-by: Craig Small <csmall@enc.com.au>
2014-01-14 22:23:58 +11:00
Craig Small
7f6efed9bb sysctl --system loads default config file
Commit cdca71e945 fixed
the loading the sysctl.conf file, but had the logic
for checking the file exists reversed incorrectly.
2013-12-27 23:08:14 +11:00
Jim Warner
23dd0cec41 NEWS: updated with the next procps-ng release of 3.3.9
Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Craig Small
ce0539ecac 3.3.8 NEWS and API
NEWS mentions systemd unit support for ps

Library REVISION (internal change only) incremented

Signed-off-by: Craig Small <csmall@enc.com.au>
2013-05-26 08:03:01 +10:00