Commit Graph

82 Commits

Author SHA1 Message Date
Jim Warner
af4e6533ba top: increase the maximum number of displayable fields
The recent addition of namespaces, combined with those
potential suse out-of-memory fields, means that we are
close to the maximum number of fields poor ol' top can
display. Imagine, the really old top was limited to 26
fields (28 with the suse hack) and this top had neared
the version 'g' rcfile limits which were a healthy 55.

This patch adds another 15 fields to the maximum while
making it even easier to increase in the future. Also,
top still silently accommodates older config files all
the way back to the original pre-ng version top-3.2.8!

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Jim Warner
2aa0951d1b top: expand this program to include namespaces support
Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Jim Warner
80e6783436 top: modest efficiency change to message line handling
When the final solution for cursor positioning for all
^Z or ^C cases was introduced the revised placement of
message line management introduced with the window mgr
'screen' refactor was retained. Those two commits mean
that a former tgoto was no longer needed when clearing
that msg line or displaying the scroll coordinate msg.

This patch eliminates the tgoto employed by frame_make
while assimilating a now defunct show_scroll function.

Reference(s):
. final cursor positioning for ^Z or ^C
commit 46a1356219
. 'screen' window manager refactor
commit 0fe393ff27

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-08-30 22:08:25 +10:00
Jim Warner
25ed080eaa top: refine some miscellaneous signals interrupt stuff
This commit mostly justs renames a few identifiers but
it also will now suppress any end-of-job report if top
wasn't ended via the 'q' key convention (i.e. signal).

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-07-02 14:49:46 +02:00
Jim Warner
5c974ff44d top: enable screen contents preservation at end-of-job
The title of this commit is actually quite misleading.

Were it more accurate, it would at least mention a tty
emulator's scrollback buffer, which was the cumulation
of a long pursuit to reduce the SIGWINCH overhead when
a window manager carelessly floods an application with
that signal *while* a user is still resizing a window!

Disabling and enabling that scrollback buffer resulted
in the final top display replaced with original screen
contents, a phenomenon acknowledged at the time but it
also represented a user interface change which has now
produced the first request for return to old behavior.

After the SIGWINCH dust settled, another problem arose
regarding behaviors under the 'screen' window manager.
In response, top was refactored a bit to avoid display
corruption. That was before discovering 'screen' could
duplicate the scrollback buffer behavior top expected.

As it turns out, the 'screen' refactoring had probably
made scrollback buffer manipulation unnecessary. Still
one could argue that a window should not be allowed to
scroll while a constantly updating program was active.

The solution represented in this commit returns former
behavior at program end (retaining top's last screen).
And if we ever wish to disable scrollback buffers, the
associated logic was retained but made conditional. It
is not reflected in configure.ac but might be someday.

Lastly, this commit corrects cursor positioning when a
^C is issued under 'Fields Management' at any terminal
that didn't have a scrollback buffer (i.e. a console).

Reference(s):
https://bugzilla.redhat.com/show_bug.cgi?id=977561
http://www.freelists.org/post/procps/top-library-miscellaneous-tweaks,1
. screen program refactor
commit 0fe393ff27
. scrollback buffer disabled
commit dedaf6e1a8
. sigwinch management defines
commit adca737758
commit 4f33b6b8c5

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-07-01 19:10:57 +02:00
Jim Warner
2ede50902f top: provide a build option to change memory precision
When summary & task area memory scaling was introduced
in release 3.3.6, the memory field widths were widened
slightly so unscaled KiB values could be provided more
consistently and scaled values (beyond MiB) could show
3 decimal places of precision. However, some users may
prefer the former widths/precisions for memory fields.

This commit will provide a build time configure option
to return top to those former defaults as a compliment
to a new %CPU & %MEM field precision configure option.

Reference(s):
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=707648
commit 21e550bc08

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-05-19 09:40:42 +10:00
Jim Warner
77abe18d01 top: revert %CPU and %MEM precision to former defaults
When summary & task area memory scaling was introduced
in release 3.3.6, the percentage columns were expanded
to provide 3 decimal places of precision. In hindsight
that may have been overkill, making those columns more
of a distraction than useful, with just too much info.

This patch will revert those columns to the former one
decimal place. And as was true, that decimal point may
be sacrificed depending on the number of cpus present.

And, in case anyone might prefer additional precision,
a build option can provide it (--enable-wide-percent).

Reference(s):
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=707648
http://www.freelists.org/post/procps/What-happened-to-my-top,1
commit 21e550bc08

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-05-19 09:40:42 +10:00
Jim Warner
ae102f359f top: reduce function call overhead in the NUMA support
Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-05-19 09:40:41 +10:00
Jim Warner
edba932a7e top: introduce a plug-in approach for the NUMA support
The NUMA/Nodes support in top has gone through several
evolutions (primarily dealing with build-sys options).
With this commit the library dependency issues are now
moot and the responsibilities for run-time loading and
dynamic linking are assumed by the top program itself.

Henceforth, if top is executed in an environment where
libnuma.so is present, top will offer such extensions.
Even more importantly, when a missing libnuma is later
installed, top will offer numa support auto-magically.
All NUMA/Node build-sys dependencies are thus removed.

The former NUMA_ENABLED define has become NUMA_DISABLE
should anyone wish to test user interface implications
in an environment that *does* have libnuma. It is also
represented as the ./configure option: --disable-numa.

Lastly, the 't' (View_STATES) toggle will be forced on
for sanity whenever the '1', '2' or '3' keys are used.

Reference(s):
. original idea from: Dr. Fink <werner@suse.de>
http://www.freelists.org/post/procps/top-NUMA-node-CPU-utilization-support,18
. original numa suppoort
commit 8d989c68c0

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-05-05 09:12:08 +10:00
Jim Warner
3ac09447e5 top: change number of emulated cpus from four to eight
With the addition of NUMA/Node support and the ability
to emulate such support even in the absence of libnuma
and numa.h, the maximum number of cpus top can emulate
was increased to make numa emulation more interesting.

( whew, that's an awful lot of "emulates", me thinks )

Reference(s):
commit 8d989c68c0

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-04-24 08:29:21 +10:00
Lance Shelton
8d989c68c0 top: program code changes, enable NUMA/Node extensions
This commit extends the top Summary Area cpu states to
include information on Non-Uniform Memory Architecture
nodes. It is based upon changes originally proposed by
Lance Shelton who was instrumental in the final patch.

With this change, the user will have new commands that
will provide alternatives to the individual cpu stats:

. '2' toggles between cpu & numa node summary displays
. '3' provides node summary and related cpu statistics

These extensions required some minimal system support.
Typically, the numactl package (and maybe libnuma-dev)
are all that's needed to show a single node which owns
all the processors. Failing that, or for slightly more
variety, top also offers a #define named PRETEND_NUMA.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
Signed-off-by: Lance Shelton <LShelton@fusionio.com>
2013-04-14 22:21:42 +10:00
Jim Warner
5edc6fb317 top: enable other filtering via inclusion or exclusion
This change represents the extension of user filtering
based on inclusion or exclusion. However where 'U'/'u'
filtering provides an either/or choice, this extension
offers multiple choices applicable to multiple fields.

The 'inclusion' and 'exclusion' criteria can be freely
combined making a powerful tool to fine tune a display
and avoid clutter associated with uninteresting tasks.

I'm convinced it offers unimagined future flexibility!

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/top-over-the-top,22
http://www.freelists.org/post/procps/top-over-the-top,8

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-03-04 18:46:34 +01:00
Jim Warner
5e4bade595 top: minor refactor in preparation for other filtering
While it's only documented (so far) in commit text and
an occasional email I've tried to maintain some coding
standards primarily for reference/navigation purposes.
They also served, I felt, as useful mental challenges.

Someday I will get around to formerly documenting them
but in the meantime here are the ones for this commit:

. functions are grouped into logical (i hope) sections
. functions & sections are ordered to avoid prototypes
. function names are alphabetical within every section

Thus, given those constraints/objectives, and in order
to prepare for an upcoming Other_Filter feature, a few
things had to be renamed and rearranged. Plus a couple
of other (unrelated) tweaks were made for consistency.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit 270e8e7eeb
http://www.freelists.org/post/procps/PATCH-12-top-restore-terminal-state-on-exit,4

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-03-04 18:46:31 +01:00
Jim Warner
b9976f7056 top: finish the job of correcting the response to a ^Z
if top is suspended while on the 2nd level help screen
the <Enter> key is no longer honored. Thus, users must
use <Esc> to exit help and return to the main display.

Also, line input that was only partially complete when
suspended would still require one additional keystroke
before the read was aborted and the display refreshed.

Lastly, some user interactions might require two input
lines before an operation can be considered completed.
Thus the 2nd line offers another opportunity for users
to suspend top. Resumption would require an extra key.

These issues stem from 2 recent enhancements: preserve
the user context when signaled; complete input editing
with cursor movement keys, insert/overtype modes, etc.

With this patch, the <Enter> key is once again honored
on help screen #2 and partial reads are now completed.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
       bug reported
http://www.freelists.org/post/procps/top-over-the-top,25
       response to ^Z (partial solution)
commit 5c3fffcf28
       line input editing
commit 477b10c0bd
       preserve context with SIGWINCH
commit ba9092ad83

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-03-01 14:25:35 +01:00
Jim Warner
709785e20b top: add the field 'USED' to top's existing repertoire
After revisiting the issue of a new field, combining 2
existing fields (RES and SWAP), I've decided it indeed
makes sense. After all, with the vastly expanded field
capability and the ease of adding new fields, it would
save some precious horizontal screen real estate while
also eliminating some mental/manual user calculations.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/top-enhancements-i-hope
http://www.freelists.org/post/procps/top-regression-reports

Signed-off-by: Jim Warner <james.warner@comcast.net>

 top/top.1     |   23 ++++++++++++++---------
 top/top.c     |   14 ++++++++++++--
 top/top.h     |    6 ++++++
 top/top_nls.c |    3 +++
 4 files changed, 35 insertions(+), 11 deletions(-)
2013-03-01 14:25:31 +01:00
Jim Warner
9dd7251ca3 top: consolidate logic dealing with resetting a window
This commit just gathers all the logic associated with
resetting/normalizing a single window in one function.

In the future, should the window structure be expanded
to support added functionality, the act of maintaining
it will have been made a little bit easier, hopefully.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-03-01 14:25:28 +01:00
Jim Warner
5ee1286625 top: allow re-ordering of saved line input upon recall
The original implementation of input line recall keeps
strings in the order established when initially added.
With this commit, that has been changed so any matched
string moves to the top of the saved input line stack.

[ well technically not the top since that's occupied ]
[ by an 'empty' string which serves multiple masters ]

Thus, the most frequently referenced strings over time
will percolate up and remain the most easily recalled.
But just in case anybody prefers the strict historical
ordering, a #define can restore the original behavior.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit 2efe275512

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-27 17:03:54 +01:00
Jim Warner
2efe275512 top: enable recall of previous input lines for re-edit
With this commit, users can now retrieve previous line
input for re-editing and/or re-input using the Up/Down
arrow keys (or their aliases). This mirrors the 'bash'
or 'less' interface and represents a major enhancement
achieved via a somewhat minor impact to our code base.

[ 33 lines of code, 5 closing braces & some comments ]
[ all in 1 function, when TERMIOS_ONLY isn't defined ]

Currently, the upper limit for such recallable strings
has been set at 50 but that could be easily increased.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-24 08:43:45 +11:00
Jim Warner
477b10c0bd top: enable true line input editing with paste support
This patch changes the TERMIO_PROXY define back to the
former TERMIOS_ONLY thus changing the top default too.

Plus we can now use true line input editing while also
retaining paste capability. That former native termios
support provided only a limited destructive backspace.

Now we exploit the Left/Right arrow keys, Home/End and
Delete. Plus, the Insert key can toggle overtype mode!

[ The stage is now set for a really huge improvement ]
[ to any user input terminated with the <Enter> key. ]
[ So please stay tuned for the next patch to arrive! ]

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit fa21a6ca81

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-24 08:43:45 +11:00
Jim Warner
d04297843f top: enable user filtering via inclusion and exclusion
With this commit top can now display users which match
a user id/name or just those users which do not match.

The distinction is based on the presence or absence of
a leading exclamation point '!' (C negation operator).

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
Wishlist, http://bugs.debian.org/682086

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-24 08:43:45 +11:00
Jim Warner
c856a80ad5 top: end reliance on strdup not failing & roll our own
Lately, top has begun to rely more and more on dynamic
memory allocations rather than the static buffers that
were found in many of its structures. This was perhaps
most evident in the increasing use of the strdup call.

This commit trades that function call for the internal
equivalent which will protect us from malloc failures.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-02-24 08:43:44 +11:00
Jim Warner
adca737758 top: change default allow/suppress define for SIGWINCH
No top #define is enabled and that constitutes default
behavior. So whenever a default behavior should change
the define must be changed too if it is to remain off.

This commit simply changes top's default behavior with
respect to allowing/suppressing any potential flood of
SIGWINCH during resize operations, if running under X.

Formerly top would block those signals to reduce costs
of repeated refreshes. That yields a requirement where
the user would have to provide another keystroke for a
final display update. That keystroke may not always be
needed now, but it ultimately depends on some terminal
emulator's scrollback buffer. In any case, the cost of
re-sizing may go up a bit, under most window managers.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
commit 4f33b6b8c5
http://www.freelists.org/post/procps/top-won-the-sigwinch-war
http://www.freelists.org/post/procps/top-won-the-sigwinch-war,4
http://www.freelists.org/post/procps/top-won-the-sigwinch-war,5

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-30 10:53:48 +11:00
Jim Warner
4f33b6b8c5 top: offer define to allow/suppress excessive SIGWINCH
After carefully working our way to the point where the
excessive SIGWINCH interrupts are now throttled, along
comes a commit which reverses all those prior efforts.

Actually it doesn't. It simply allows one to choose if
all those efforts should be reversed or remain active.

Why in the world would you even want to consider that?

Quite simply, to opt for responsiveness over overhead.
Oh, and depending on the terminal emulator used for X,
by enabling this OFF_SIGWINCH #define you will be able
to avoid the need for an extra keystroke after resize.

Besides it was an interesting programming challenge to
see just how few lines of code would be needed to make
it possible. Bottom line? Only 1 source line required!
(actually 0 lines, since the define disables one line)

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/unwanted-topinspect-window-enclosure-with-the-terminal-size-change

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-24 21:29:24 +11:00
Jim Warner
dd357e70e7 top: immunize against window manager flood of SIGWINCH
Whew, it was nip-and-tuck there for awhile but finally
we solved the SIGWINCH overload problem one finds with
most X window managers. Now if a window manager should
try to inundate ol' top with repeated SIGWINCH signals
they won't even be received so can't impact us at all.

And we achieve this miracle having never even issued a
sigprocmask, so all the top code executes with signals
totally unblocked. Intuition suggests it probably rubs
even more salt in the wound, but au contraire mon ami!

The key to our success was simply trading the 'select'
call for its cousin 'pselect'. Not only does that call
provide nanosecond granularity (vs. the former's usec)
but it takes a sigset_t parm which can then atomically
block the troublesome SIGWINCH guy until user input or
optional timeout. Net result? No more signal overload!

Now, if only we could just coax all terminal emulators
into one identical standard buffering scheme plus find
some way to emulate the most recent SIGWINCH, it would
be perfect. We would then obviate the user requirement
of typing yet 1 more key before seeing proper results.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/unwanted-topinspect-window-enclosure-with-the-terminal-size-change
http://www.freelists.org/post/procps/Sourceforge-project,7

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-24 21:29:24 +11:00
Jim Warner
de6df7d736 top: refactor all the low-level i/o logic for SIGWINCH
This commit primarily involves renaming functions plus
reorganizing logic in preparation for the next changes
which will hopefully yield the 'final solution' to the
excessive SIGWINCH signals under most window managers.

In this specific patch, the most significant change is
the introduction of a new 'ioa' function (io avail) to
focus all logic dealing with unsolicited user keyboard
input and exposed to signals and/or optional timeouts.

That new function is where our signal overload will be
ultimately defeated, if it is at all humanly possible.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/unwanted-topinspect-window-enclosure-with-the-terminal-size-change

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-24 21:29:23 +11:00
Jim Warner
ba9092ad83 top: preserve current screen when receiving a SIGWINCH
Prior to this commit, top has always taken the easiest
(safest?) approach when dealing with those troublesome
SIGWINCH interrupts. Whenever the user was on a screen
other than the main display, any signal received would
force an immediate exit, returning to the main screen.

With these changes, top will retain the user's current
position regardless of what screen he/she was viewing.

In support the following additional changes were made:
* the initial help screen requires an explicit end key
` not 'any other key' formerly used to request an exit
* the colors mapping screen instructions were improved
* ^Z response was made immediate, eliminating the flag
* the sigaction's SA_RESTART flag had to be eliminated
* sigprocmask logic was normailize to the bare minimum
* the POSIX.1-2004 async-signal safe functions used in
` the signal handlers were acknowledged and documented

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Reference(s):
http://www.freelists.org/post/procps/unwanted-topinspect-window-enclosure-with-the-terminal-size-change

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-24 21:29:23 +11:00
Jim Warner
5856919e83 top: even more miscellaneous accumulated modifications
This commit just addresses the following minor issues:

. eliminate the leading tab character upon error exits
. standardized single key input as 'keyin', not 'chin'
. symbolic keys changed to guarantee no negative value
. placed most 'case' statement labels on a unique line
. standardized lvalue/rvalue convention in while loops
. fixed prototype declaration in the 'debug_END' macro

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-24 21:29:22 +11:00
Jim Warner
d9f7c76114 top: prevent display corruption in Locate highlighting
There existed a small chance that the display could be
corrupted when a search string was found within a row.
For that to happen, conditions like these were needed:

. a very short Locate string was active in some window
. the string matched part of a terminfo <esc> sequence
. that sequence was used in highlighting running tasks
. the 'x' toggle was active (sort column highlighting)

One solution to this potential problem was to manually
turn off sort column highlighting before using Locate.
But rather than rely on a user remedy, we'll automate.

Since other top provisions were already being enforced
when Locate was in use (off 'i' and/or 'u'/'U'), we'll
now also force column highlighting off when the search
string in a given window is not empty. However, unlike
idle tasks and user filtering, when that search string
*is* emptied, we restore highlighting for that window.

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-23 21:23:36 +11:00
Jim Warner
1da293bf59 top: accumulated miscellaneous code and comment tweaks
This commit just addresses the following minor issues:

. restored both lost end-of-job reporting capabilities
. added missing initializers to the DEF_RCFILE #define
. added 'nls_maybe' eye-catcher to the 'Scaled_sfxtab'
. removed a now superfluous 'READMINSZ' assertion test
. man document references to 'top' are more consistent

(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-23 21:23:36 +11:00
Jim Warner
dec6b8ffe7 top: happy new year while incrementing copyright dates
Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-23 21:23:35 +11:00
Jim Warner
b01946742b top: eliminate task row anomalies with active searches
This potential problem is caused by frequently spawned
and short lived tasks which happen to sort above a row
containing a match from an active Locate request. It's
most likely to be visible when under Forest View mode.

This commit will eliminate a potential duplicated row.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-01-01 12:20:17 +11:00
Jim Warner
ebf4d6dbba top: just touch up some comments for esthetic purposes
Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-23 06:48:36 +11:00
Jim Warner
e6cb40235e top: extend scaled summary memory range to include EiB
This commit increases the upper limit for summary area
memory scaling to 9999.999 Exbibytes. It also enhances
the man page through a helpful table for equivalences.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s):
http://www.freelists.org/post/procps/top-regression-reports
http://www.freelists.org/post/procps/top-enhancements-i-hope,1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:10:12 +11:00
Jim Warner
21e550bc08 top: provide the means to adjust scaled process memory
This commit is an unrequested outgrowth of the earlier
change dealing with summary area memory field scaling.
That user selectable scaling provision is now extended
to include 6 (at present) task oriented memory fields.

The new companion 'e' (lower case) interactive command
has been added and, like the 'E' command, it can cycle
each of the currently displayed memory columns between
KiB through TiB. There are, however, some differences.

Where '+' indicates summary area truncation at a given
radix, task memory fields are automatically scaled for
their column. Thus, not all rows use the same scaling.

And, while summary area field widths were not changed,
the task memory columns were widened in order to offer
more meaningful data when the radix was increased. The
precision is automatically increased in step with each
radix: MiB displays 2 decimal places, GiB 3 and TiB 4.

To compliment that additional precision, both the %CPU
and %MEM fields were widened by 1 column and now offer
precision up to 3 decimal places. But, unique to %CPU,
widening could already have occurred due to the number
of processors in some massively parallel boxes. At any
rate, total extra width for both memory and percentage
fields could amount to twenty (precious) columns more.

So for both the memory and % fields the original width
(along with loss of precision) can be restored via new
compiler conditionals which this commit also provides.

p.s. and it will be rcfile preserved for any restarts!

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s):
http://www.freelists.org/post/procps/top-regression-reports

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:41 +11:00
Jim Warner
bc46f67f9a top: provide the means to adjust scaled summary memory
Earlier this year, the switch from KiB to Mib as shown
in top's summary area was postponed to those occasions
when KiB exceeded 8 digits. In hindsight that may have
moved top in the wrong direction, given the difficulty
of digesting such large numbers of digits at a glance.

This commit adds a new 'E' interactive command used to
cycle the displayed memory amounts ranging from KiB to
TiB. Thus, users can choose the radix they wish shown.

p.s. and it will be rcfile preserved for any restarts!

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Reference(s):
http://www.freelists.org/post/procps/top-regression-reports

commit 95f2201730
Author: James Cloos <cloos@jhcloos.com>
Date:   Mon Feb 6 00:00:00 2012 -0500

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:40 +11:00
Jim Warner
d747659ad8 top: follow ps lead, allow core dumps where applicable
Reference(s):
Bug-Redhat: https://bugzilla.redhat.com/871825
commit c1f10d11bc
http://www.freelists.org/post/procps/PATCH-Allow-core-file-generation-by-ps-command-rhbz871825-rhbz512857

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-22 17:07:39 +11:00
Jim Warner
eeafd6cfe0 top: highlight all regular search string(s) when found
With the recent inspect search highlight provisions in
place, the lack of highlighting in task based searches
has grown from being only irritating to a real defect.

Thus, this commit introduces parallel functionality to
those searches initiated within a visible task window.
And just as separate inspect searches are possible for
each selection, per window task searches are provided.

However, it should be noted that there are differences
between task based searches and inspect type searches:

* There is no concept of out-of-view data when dealing
. with task rows -- if the data can't bee seen, it has
. not, in fact, been constructed from a proc_t struct.

* While inspect data is output at the character level,
. up to now all task display data was only potentially
. output and it was always based on a complete string.

* With task search highlighting, rows now containing a
. match must be output in pieces and, therefore, can't
. be optimized away like other rows which haven't been
. been altered. This is because top cannot predict the
. the contents of a search string or, how many matches
. might occur in a given row. Short search strings and
. many matches would raise buffer needs geometrically.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-11 22:54:25 +11:00
Jim Warner
5a0614e452 top: provide inspect selections with separate searches
This commit extends Inspect provisions for 'find/next'
to each individual selection. Thus a user can maintain
multiple active searches without having to reissue the
locate command whenever the current selection changes.

To emphasize this feature the View screen now displays
the current active locate string or 'N/A' if inactive.
Such a reminder is important when no found matches are
present on the 1st display page, given that they would
otherwise be apparent via the additional highlighting.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-10 09:29:28 +11:00
Jim Warner
5ff464bdb1 top: highlight all inspect search string(s) when found
We have modeled the Inspect search provisions on those
provided by the 'less' pager. With this commit we take
the next step and provide for highlighting any strings
matched (and in view). Of course, top will continue to
adjust the beginning column so as to bring out-of-view
matches into view, while highlighting visible matches.

However, top won't emulate every 'less' behavior since
the following are seen as flaws in the user interface.

* when viewing true binary data, less makes no attempt
. to smooth the right margin by truncating unprintable
. symbols, thus creatng ragged unappealing right edges

* when viewing true binary data, less will always fail
. search requests regardless of surrounding characters

* less refuses to bring out-of-view found matches into
. view by adjusting the left-most column, if necessary

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-10 09:29:27 +11:00
Jim Warner
8292f7b8ec top: generalize handling of questionable rcfile issues
Previously top would warn users if an older version of
an rcfile was about to be overwritten. That's assuming
that RCFILE_NOERR was not defined. This left, however,
other potential rcfile issues or questions unattended.

For example, if a faulty 'inspect' redirected echo had
overwritten all window entries or if the inspect entry
was not 'pipe' or 'file' (actually, just a 'p' or 'f')
then top would silently accept it but look no further.

With this commit top will try to process every inspect
entry, while preserving unrecognized entries. Plus all
other non-fatal rcfile errors will now alert a user to
the potential overwrite when the 'W' command is given.

(now that we know a '.' + 2 spaces is squeezed to one)
(everything's perfectly justified, but it's just luck)

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-10 09:29:27 +11:00
Jim Warner
d2c84c6e13 top: use the type size_t more consistently for inspect
Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-12-02 13:39:52 +11:00
Jim Warner
081fe506f3 top: add a flexible 'Inspect' capability
This commit introduces an extremely powerful, flexible
brand new capability.  Now, users can pause the normal
iterative display and inspect the contents of any file
or output from any script, command, or even pipelines.

It's invoked via the 'Y' interactive command which, in
turn, is supported with simple user supplied additions
as new entries in the top personal configuration file.

A separate new 'Inspect' window supports scrolling and
searching, similar to the main top display.  Except it
extends existing 'L'/'&' (locate/locate-next) commands
so that an out-of-view match automatically adjusts the
horizontal position bringing such data into view.  And
it provides for multiple successive same line matches.

Also, the basic 'more/less' navigation keys are active
in this new 'Inspect' window, to ease user transition.

There are no program changes required when entries are
added to or deleted from the rcfile.  And there are no
known limits to the complexity of a script, command or
pipeline, other than the unidirectional nature imposed
by the 'popen' function call which top cannot violate.

Since it's impossible to predict exactly what contents
will be generated, top treats all output as raw binary
data.  Any control characters display in '^C' notation
while all other unprintable characters show as '<AB>'.

The biggest problem encountered was with the find/next
capability since that strstr guy was really diminished
given the possibility that numerous 'strings' could be
encountered *within* many of top's raw, binary 'rows'.

Oh, and another problem was in maintaining the perfect
left & right text justification of this commit message
along with all of the commit summaries.  Some of those
summaries (like this very one) are of course, slightly
shorter, to make room for the 'man document' addition.

Enjoy!

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-11-27 22:08:02 +11:00
Jim Warner
e77c8e8cf0 top: for performance, employ additional inlining
The 'refactor and enhance column width management'
recent redesign produced many subsequent benefits,
the latest of which is automatically sized fixed-width
non-scalable columns.

As expected, there was a cost associated with these
many enhancements.  That cost has now been identified
as a 1-4% performance degradation, depending on which
fields are being displayed.

This increased cost arises principally from current
drawing related function calls, whereas top-3.3.3 did
most of its drawing via macros effectively inlining
those duties.

This commit inlines the equivalent drawing functions,
thus eliminating the function call penalty, and places
this top on a par with top-3.3.3.  The trade off is a
modest additional 4k in executable size.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-10-11 21:13:14 +11:00
Jim Warner
35cd340002 top: 'X' command offers auto option
The recent introduction of a column widths override
(the 'X' command) provided for a user input amount
to be added to default field size which ranged from
5 to 10 bytes.

While that approach could prevent truncated data, the
different default sizes would almost certainly mean
some precious screen real estate was waisted.

This commit introduces the concept of dynamic widths
where top will add only enough to a field default to
prevent truncation for that specific field.

Now users have a choice between their explicit width
override or a width chosen by top to exactly match
display needs.  The former is immediate but likely
wastes some horizontal space while the latter is
iterative but will be sized precisely.

Original 'X' Command:
commit 384afa494a
commit 47e1d063ac

Extensions to 'X' Command:
commit bbf8e44fb4
commit 7557f3f754

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-10-11 21:13:13 +11:00
Jim Warner
384afa494a top: optional wider non-scalable cols
This commit accommodates those fields which may have
suffered truncation due to these default limits:
  . 5 digits for uid/gid type fields
  . 8 characters for user/group type fields

With a new interactive command, users can increase the
width of all such fields, or return to the defaults.

Note:
   There are no restrictions on the amount added to
   the defaults.  The user is free to vastly exceed
   screen limits which simply means such fields can
   never be displayed.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-10-02 20:56:40 +10:00
Jim Warner
c07be1d492 top: column alignment under user control
This commit affords user control over justification
for both column headings and the subordinate data.

Separate toggles are provided for control of numeric
data and string data.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-10-02 20:56:40 +10:00
Jim Warner
0f61354bf7 top: refactoring now allows column header nls support
Now that column headings are independent of column
data format and require no carefully managed padding
bytes they are candidates for nls translation.

This commit migrates all column headings to the .pot
file with additional translator guidance in the form
of maximum sizes to avoid truncation.

It also places these new additions adjacent to their
associated descriptions, which were already present.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-10-02 20:56:40 +10:00
Jim Warner
64cfdda756 top: refactor and enhance column width management
This commit accomplishes the following objectives:
 * remove extra task_show parm added with 'Locate'
 * avoid column overflow with subsequent misalignment
 * eliminate spaces for column heading padding
 * decouple column headings from column data formats
 * eliminate all hardcoded column format specifiers
 * generalize the inter-column spacing management
 * remove Fieldstab.desc in favor of direct nls access
 * set the stage for nls support of column headings
 * set the stage for dynamic changes to justification

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-10-02 20:56:39 +10:00
Jim Warner
beb0982b28 top: implement a new approach to forest view mode
The TREE_RESCANS #define (formerly TREE_ONEPASS) has
been eliminated and the approach to forest view mode
redesigned.  The chance of dangling children has been
eliminated and overhead reduced.

We now order processes on start_time (non-display)
and are therefore immune to any pid, ppid or tgid
anomalies when pid values wrap.

The new algorithm also accommodates any distortions
caused by the 3.3 kernel 'hidepid' provisions --
something guaranteed to produce dangling children
under the former approach.

Related References:
commit a2086dfdf6
commit cd608f462e
commit 41ed28aa5d

Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-08-31 07:22:31 +10:00
Jim Warner
d9cf59a9b2 top: add major/minor page fault deltas
Signed-off-by: Jim Warner <james.warner@comcast.net>
2012-08-29 17:37:29 +10:00