The "usrbin_execdir" hack meant to install some binaries in /bin and
others in /usr/bin. However:
- It is very inflexible: not much control on the final directory name
and it is not possible to get rid of the usr/bin suffix without
patching the build system.
- It is hard to use: it requires configure to receive --exec_prefix=/
and other settings do not make much sense. It is not very obvious that
that setting needs to be passed and it takes a while to figure it out.
- It produces garbage with the default setup: the default prefix of
/usr/local ends up installing the binaries under /usr/local/usr/bin
which does not make any sense.
Furthermore, the requirement to split binaries in /bin and /usr/bin is
not that strong since some distributions adopted the /usr merge and so
would agree to just deploy all binaries to /usr/bin directly.
Distributions that would still like to split /bin from /usr/bin should
actually move binaries such as `ps` and `kill` to /bin after the install
of procps-ng is complete. After all, they are the ones responsible for
determining what are the binaries that need to be in the root partition
and that list depends on their early boot init scripts, so it is
possible that the list must be augmented with other binaries from this
package.
Therefore, I propose here to get rid of that hack and simply install all
the binaries to bindir instead, which solves the problems described
above and simplifies the build and install of procps-ng.
Tested that it builds and both `make check` and `make distcheck` work.
Tested that `make install` works and produces the expected tree, the
only difference being the absence of the bogus /usr/local/usr/bin
directory and now all binaries are merged into /usr/local/bin as
expected.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Otherwise, automake 1.14 will warn that this option will become the
default in an upcoming release, which will cause problems for the
procps-ng build.
Now that the automake rules were merged in the top level Makefile.am,
it is possible to enable "subdir-objects" without breaking the build or
the dist.
Tested that it builds and both `make check` and `make distcheck` work.
Tested that `make install` works and produces the same tree before and
after this change. Confirmed that binaries are also placed in the same
locations in the build tree.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
This will be required for subdir-objects, otherwise automake will have
problems with more than one Makefile.am having rules to build the same
files.
Tested that it builds and both `make check` and `make distcheck` work.
Tested `make install` and compared the tree with the one installed
before this commit, both installed the binaries to the same locations.
The binaries are also in the same location in the build tree (for
instance, ps/pscommand is still there.)
Checked the binaries for the correct libraries linked into them. Binary
sizes matched before and after this change.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
This suppresses the following warning from libtoolize 2.4.2:
libtoolize: `AC_PROG_RANLIB' is rendered obsolete by `LT_INIT'
Tested that this does not break the build and that both `make check` and
`make distcheck` continue working as expected.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
For over a decade top has used a startup configuration
mimicking the original redhat top. This decision dates
back to when the forked Sourceforge version was trying
to win over users in battles with that ancient kludge.
Will anybody deny that those defaults are coyote ugly?
Well, it is time that top presented a more modern look
at startup, providing that no saved rcfile exists. But
just in case some distro prefers that old, comfortable
look, there's the '--disable-modern-top' build option.
[ Pssst. With the widened memory fields it turns out ]
[ the 'Mem' default window had become almost useless ]
[ on an 80x24 terminal since %CPU & COMMAND were out ]
[ of view. So some other defaults were tweaked a bit ]
[ whether or not --disable-modern-top was specified. ]
Reference(s)
http://www.freelists.org/post/procps/tops-graph-mode-saga-continues,3
Signed-off-by: Jim Warner <james.warner@comcast.net>
The translated manpage generation has moved from scripts to
Makefiles. This asists with conditional building as well, no
need to regenerate the German pgrep man page if both
the original pgrep.1 and man-po/de.po is not changed.
My Makefile-fu fails me on producing a cross-product or double
iteration for languages and man pages. Until that is solved
each man page is explicitly built. No big deal but it doesn't
look elegant in the Makefile. Languages will be picked
up automatically if they are found in man-po, man-po/top or
man-po/ps
The README describes the three-step process for translating
the files, incase I forget or someone else wants to update them.
Library systemd-login offers possibility to display
name of a systemd slice unit for specific pid.
This patch adds output option "slice" which will
show name of systemd slice unit.
To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
As the sysvinit becomes obsolete, some of the bundled tools
need to find a new home. The procps-ng project seems to be
the most suitable project for adopting the pidof tool.
This commit introduces a redesigned version of pidof
that satisfies the LSB requirements.
In corner cases the behaviour might differ from the former
one as the new version doesn't use any stat(2) calls.
The automake AM_SILENT_RULES macro is supported since automake 1.11
(which is required for procps). The silent functionality is enabled by
default, you can change it by:
./configure --disable-silent-rules
or
make V=1
Note that make still prints compiler errors, etc.
Signed-off-by: Karel Zak <kzak@redhat.com>
* don't duplicate default behavior with [enable_foo=$enableval]
* don't introduce things like disable_* variables
* use everywhere the same coding style
Signed-off-by: Karel Zak <kzak@redhat.com>
Previously the libselinux support was present
in the sources, but disabled with a preprocessor
condition (#if 0).
From now the libselinux support can be enabled with
the --enable-libselinux switch available
in the configuration script. That way is more
flexible than local patches modifying the condition
value from 0 to 1.
When summary & task area memory scaling was introduced
in release 3.3.6, the memory field widths were widened
slightly so unscaled KiB values could be provided more
consistently and scaled values (beyond MiB) could show
3 decimal places of precision. However, some users may
prefer the former widths/precisions for memory fields.
This commit will provide a build time configure option
to return top to those former defaults as a compliment
to a new %CPU & %MEM field precision configure option.
Reference(s):
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=707648
commit 21e550bc08
Signed-off-by: Jim Warner <james.warner@comcast.net>
When summary & task area memory scaling was introduced
in release 3.3.6, the percentage columns were expanded
to provide 3 decimal places of precision. In hindsight
that may have been overkill, making those columns more
of a distraction than useful, with just too much info.
This patch will revert those columns to the former one
decimal place. And as was true, that decimal point may
be sacrificed depending on the number of cpus present.
And, in case anyone might prefer additional precision,
a build option can provide it (--enable-wide-percent).
Reference(s):
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=707648http://www.freelists.org/post/procps/What-happened-to-my-top,1
commit 21e550bc08
Signed-off-by: Jim Warner <james.warner@comcast.net>
The earlier commit purporting to allow top to be built
in the absence of that dynamic linking library stopped
just a little short of the truth. So this will fix it.
Reference(s):
commit 5686877cd4
Signed-off-by: Jim Warner <james.warner@comcast.net>
Been a while since we ran a re-scan over the autotools files. This
change modernises the configure file. Not a great deal of changes
required to bring us up to date, autoscan doesn't understand our
optional things, which is fine.
Oh that poor ol' build system. With this patch it will
have gone through three separate incarnations in terms
of NUMA/Node support. Those 3 iterations consisted of:
1. A 'porridge too hot' where the top numa support was
enabled if it was built in the presence of libnuma and
the numa.h header. But if the numa library wasn't part
of core packages, that would have broken poor old top.
2. A 'porridge too cold' where numa support was off by
default and must have been explicitly enabled when the
./configure script was run. This could have meant that
distros might not distribute a numa-aware procps, even
though their numa library would have been distributed.
3. And this 'porridge' where the top numa support will
become a 'plug-in' feature activated when the presence
of libnuma.so can be verified at runtime. We'll do our
own loading and symbol resolution (with some help from
dlopen in libdl). Thus maintainers' responsibility for
enabling numa support and then satisfying that library
dependency is now an entirely optional --disable-numa.
As Goldilocks might say about our current configure.ac
"Ummm, I think this porridge tastes just about right".
Reference(s):
. 1) too-hot
commit 87ac6383bb
. 2) too-cold
commit 53fd7dd1ed
. original idea from: Dr. Fink <werner@suse.de>
http://www.freelists.org/post/procps/top-NUMA-node-CPU-utilization-support,18
Signed-off-by: Jim Warner <james.warner@comcast.net>
Library systemd-login offers possibility to display
the name of the VM or container which process belongs to.
This patch adds output option "sd_machine" which will
show machine name or "-" when the name can not be determined.
To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
Library systemd-login offers possibility to display
name of a systemd unit file for specific pid. Note that
not all processes are part of a system unit/service
(e.g. user processes, or kernel threads).
This patch adds output option "sd_unit" which will
show name of systemd unit or "-", when process does not
belong to any unit.
To maintain compatibility with non-systemd systems,
procps must be configured with --with-systemd option
to enable this option.
This patch provides the build system support for those
top extensions dealing with the NUMA summary displays.
For providing the initial impetus for this enhancement
I wish to thank Lance Shelton <LShelton@fusionio.com>.
(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch provides the build system support for those
top extensions dealing with the NUMA summary displays.
For providing the initial impetus for this enhancement
I wish to thank Lance Shelton <LShelton@fusionio.com>.
(everything is perfectly justified plus right margins)
(are completely filled, but of course it must be luck)
Signed-off-by: Jim Warner <james.warner@comcast.net>
Signed-off-by: Lance Shelton <LShelton@fusionio.com>
For portability, check for error.h during configure and define
HAVE_ERROR_H accordingly.
If this header is not available, emulate the functionality of error()
from glibc with an inline wrapper in include/c.h.
For portability, check for stdio_ext.h during configure and define
HAVE_STDIO_EXT_H accordingly.
If the current system does not provide this header, use a fallback for
__fpending(). This definition will not work on all systems as it relies
on internal data structures of libc. A more portable solution should be
preferred, for example by using gnulib.
For portabiliy, check for program_invocation_name during configure and
define HAVE_PROGRAM_INVOCATION_NAME accordingly. Use of this symbol is
now enclosed with the appropriate #ifdef block.
The symbol program_invocation_name is only used for error message
handling using error(), so it's safe to omit this if it is not
available.
Fixes the following error in configure stage.
configure: error: cannot run test program while cross compiling
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Both skill and snice are are mentioned in manual page to be 'obsolete
and unportable'. This commit discourages distributors to keep these
commands part of default system.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
The newer tools/ subdirectory shares a common prefix
with the previously existing top/ subdirectory and
thereby hinders shell command completion.
There was already a minor conflict between testsuite/
and top/. This patch renames the tools/ subdirecory
to avoid an even greater conflict.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Newer ncurses install pkg-config files, so search those first. If they
aren't found, fall back to existing detection logic.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The third arg is for "the user has specified some flag", not "the user
has disabled things", so use $withval.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The first check for ncurses is for the non-wide variant, so drop the "w".
The wide version gets checked later on based on watch8bit.
Signed-off-by: Samuli Suominen <ssuominen@gentoo.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Even as conservative project as coreutils has switched to xz distributions so
neither should we have any reason to use gz and waste space & bandwidth.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
The library used to be called libprocps but it was renamed to make sure
there was only one. However the formatting of the library SONAME has
changed so there cannot be any confusion.
libprocps makes it clear that its a library from this project and not a
set of functions directly on the filesystem.
The patch also removes fixed size of input, which can be problematic.
I do not know how long the string `yes' might be in all of the worlds
languages.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
The utility library is for functions which are shared in commands,
but that does not belong to libproc-ng. The first function is a
wrapper for strtol that performs error checking, and exists if such
happen.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
