From http://man7.org/linux/man-pages/man5/proc.5.html:
(22) starttime %llu
The time the process started after system boot. In
kernels before Linux 2.6, this value was expressed
in jiffies. Since Linux 2.6, the value is expressed
in clock ticks (divide by sysconf(_SC_CLK_TCK)).
Well, shit! With release 4.0 on March 25th the lxc/lxd
folks have stuck it to us once again. They changed the
cgroup lxc prefix used to identify the container name.
Signed-off-by: Jim Warner <james.warner@comcast.net>
All TIC delta fields are checked for possible negative
results and set to zero when found. This is done so as
to protect against potential anomalies which depend on
kernel version and/or toggling cpus offline or online.
[ it's probably unnecessary with the latest kernels, ]
[ except for iowait. documentation suggests it might ]
[ decrease which would then create a negative delta. ]
The same approach is employed for most of the 'system'
deltas (ctxt, intr & procs_created). However, with two
of the fields (procs_blocked & procs_running) negative
results were allowed. But it now seems such a division
is unwise so this patch will allow all to go negative.
[ rather than force any 'system' delta value to show ]
[ what's logical, we'll now let all reflect reality. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch just standardizes/normalizes the whitespace
employed within a couple of nearly identical #defines.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Under newlib, the only caller of the readproc routines
is that pids module. And in every case, the address of
some static proc_t structure has always been provided.
As a result, there is no need for the logic supporting
calloc() for a possible NULL pointer which was present
in both of those readproc() and readeither() routines.
Additionally, that pids module takes ownership of most
dynamically acquired 'str' plus 'strv' memory whenever
assigning to a results structure. So, henceforth under
the free_acquired() guy we will only free those string
fields which might exist when not explicitly selected.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch just eliminates a parameter present for the
simple_readtask() function which is not needed nor has
it ever actually been used. It will make calls to that
function (via taskreader ptr) slightly more efficient.
Signed-off-by: Jim Warner <james.warner@comcast.net>
When some cleanup was performed on the readproc module
in the commit shown below, some residual code involved
with the 'did_fake' flag remained. Since such logic no
longer served any real need, this patch will whack it.
Reference(s):
. cleanup of readproc functions
commit 887bb51016
Signed-off-by: Jim Warner <james.warner@comcast.net>
No libprocps user expects signal values to be returned
as 'long long' quantities. More importantly the <PIDS>
api only returns a 'str' result for signal categories.
So this patch eliminates all the conditional code that
depends on the absence of the #define 'SIGNAL_STRING'.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will just correct an oops introduced in the
commit shown below. Thank goodness both 'str' & 'strv'
occupy the same storage location in that result union.
Reference(s):
. standardize 'errno' management
commit 06be33b43e
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch just implements an equivalent to the master
branch 'CPU_ZEROTICS' provision. However, the original
impetus for that earlier implementation was ultimately
attributed to a likely kernel anomaly since corrected.
As a result, in this newlib implementation we take the
opposite approach to the default behavior. There is no
adjustment to TIC_SUM_DELTA values if fewer ticks than
expected are recorded, unless the define is activated.
The commit shown below explains why the 'CPU_ZEROTICS'
define was retained in spite of the fix to the kernel.
Reference(s):
. issue referencing CPU_ZEROTICS
https://gitlab.com/procps-ng/procps/issues/132
. master branch CPU_ZEROTICS summary
commit ee3ed4b45e
. lengthy thread leading to CPU_ZEROTICS
https://www.freelists.org/post/procps/CStates-handling-new-switch
Signed-off-by: Jim Warner <james.warner@comcast.net>
Some parts of our newlib implementation are the result
of functions which have been propagated from module to
module. In particular, those 'cleanup_stacks' routines
are all similar & likely originated in the <pids> api.
In that interface there was a need to free dynamically
acquired memory before the result structure was reused
to satisfy subsequent 'get', 'select' or 'reap' calls.
This, in turn, led to a concept of 'dirty' stacks with
the need to call one of two 'cleanup_stack' functions.
None of the remaining interfaces deal with such memory
yet they each had their own 'cleanup_stack' functions.
Those functions were responsible for resetting each of
the result unions to zero, excluding any 'noop' items.
The bottom line is that for all interfaces, repetitive
calls would require iterating through the stack(s) two
separate times: once to 'cleanup' another to 'assign'.
With this commit we will reduce iterations to just the
'assign' routine. A reset to zero will be accomplished
in the 'extra' item set routine (which is the only one
actually requiring any reset). All other items will be
reinitialized automatically by a new current set value
or upon reallocation when an items compliment changes.
In the <pids> interface, any freeing of dynamic memory
could have been accomplished by adding that 'freefunc'
check to the 'assign' function. However, that requires
an Item_table test with every item. Instead, we'll now
satisfy such needs as the very first step in those set
functions responsible for dynamically acquired memory.
[ the <pids> api retains 2 'cleanup_stack' functions ]
[ to accommodate stack(s) 'reset' & to serve 'unref' ]
Lastly, all the 'itemize_stack' functions were tweaked
by eliminating an unnecessary initialization of result
unions. That objective was already accomplished by the
calloc() in a 'stacks_alloc' function or the remaining
'cleanup_stack' routine found in the <pids> interface.
Signed-off-by: Jim Warner <james.warner@comcast.net>
These changes are an outgrowth of the research/testing
behind the previous commit. There is no commingling of
select/reap stacks in interfaces beyond the <pids> api
since there's no need to support any 'reset' function.
However, those <pids> changes prompted a review of all
interfaces offering that 'stacks_fetch' function, thus
revealing 2 instances of useless logic/wasted efforts.
Signed-off-by: Jim Warner <james.warner@comcast.net>
When the <pids> api was refactored in the commit shown
below, one objective was enabling the simultaneous use
of 'get' & 'select/reap' functions. Unlike other 'get'
functions, this <pids> 'get' acts as an iterator where
successive calls will return successive tasks/threads.
However, that goal wasn't quite met since a stack used
by 'get' was commingled with the 'select/reap' stacks.
Such commingling supported the 'reset' function, again
a provision which was unique to this <pids> interface.
Unfortunately, some poor assumptions in 'stacks_fetch'
produced a SEGV whenever 'reap/select' followed 'get'.
Thus, this patch addresses those issues and guarantees
such commingled stacks (extents) will be accommodated.
Reference(s):
. standardize portions of interface, <PIDS> api
commit 9ebadc1438
Signed-off-by: Jim Warner <james.warner@comcast.net>
The commit referenced below addressed (some) anomalies
surrounding 'strv' pointers. However, there remained a
couple quirks involving a potential NULL return value.
Any NULL values returned from the old library readproc
guys would cause no real harm for newlib. But they did
produce the misleading "[ duplicate ENUM_ID ]" result.
The following all represent potential NULL results and
suggest shortcomings in testing of that earlier patch.
. kernel threads do not have cgroup, cmdline & environ
. even if present environ could require root to access
So, this patch reverts a portion of the earlier commit
and ensures when some vectored string is not available
a traditional dash ('-') is the 'strv' returned value.
[ and we'll also correct one typo in the header file ]
Reference(s):
. eliminated a final potential NULL, <PIDS> api
commit 09503dc597
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit is intended as a refinement of the patches
mentioned below, where origins/sources of newlib items
were added to the header files for user documentation.
However, if those additions are to be truly effective,
along with kernel documentation (where available), the
following prerequisites must also have been satisfied:
. our identifiers closely align with linux field names
. our derived items are documented or self-documenting
Satisfying those prerequisites prompted this patch and
for these changes, kernel sources were emphasized over
available documentation (shame on me, it should always
have been so). And, while some 'new' fields were found
to be conditional, they were included unconditionally.
These changes appear more extensive than they actually
need be since I have attempted to enforce some spacing
conventions. So, I've summarize the significant things
in the sections that follow. For a proper perspective,
use: 'git diff --ignore-space-change' (good as alias).
___________________________________________ <PIDS> api
This api is unique in that there exists many different
file/directory origins subordinate to /proc/<pid>. And
our item identifiers are sometimes coerced so as to be
able to group related or similar enumerators together.
So, users needed more help relating our identifiers to
an actual documented field. Thus, we will now also add
the field names as with 'stat: delayacct_blkio_ticks'.
Each item ending with a '_C' now consistently includes
both the parent's count/time plus waited for children.
That 'RTPRIO' guy was renamed/relocated as PRIORITY_RT
since its original name is an implementation artifact.
___________________________________________ <STAT> api
The only api change was to correct a typo ('dervied').
_________________________________________ <VMSTAT> api
Even ignoring white space, this interface received the
largest number of changes. Mostly, this was because of
deficiencies in the proc(5) documentation. Recall that
this documentation already sorely lacks any substance.
Usually, just kernel releases are noted, not contents.
When compared to kernel source, that proc(5) contained
many non-existent fields and also omitted many others.
________________________________________ <MEMINFO> api
Sadly, with this api many of the changes were simply a
correction of some earlier 'human error' where several
fields where hashed then tracked but never represented
with an item enumerator in this meminfo.h header file.
_______________________________________ <SLABINFO> api
The 'SLABS' (summary) & 'SLABNODE' items were reversed
since the former are derived from the separate caches.
More significantly, those 'SLABNODE' guys were renamed
to 'SLAB' since they concern individual caches and the
concept of 'nodes' is really an implementation detail.
Also, several enumerators were changed to more closely
agree with official slabinfo(5) documentation referred
to in what we're treating as a base document: proc(5).
Lastly, while those 'SLABS' items are solely a product
of our library and not represented in slabinfo(5), the
names attempt to parallel those found as 'SLAB' items.
______________________________________ <DISKSTATS> api
One enumeration identifier was changed so as to better
reflect its relationship to that actual documentation:
'Documentation/iostats.txt', as referenced in proc(5).
Reference(s):
. 12/2018, item origins added (and commit msg history)
commit 96d59cbf46
. 01/2019, <stat> origins tweaked
commit 201e816b26
Signed-off-by: Jim Warner <james.warner@comcast.net>
Rather than offer three separate patches, they've been
consolidated in this single commit. All are related in
that they surfaced while preparing a subsequent patch.
------------------------------------------------------
library: correct a broken '#if define', <SLABINFO> api
It was introduced (embarrassingly) in the patch below.
Reference(s):
commit 97d078a9af
------------------------------------------------------
library: correct a broken 'GET' macro, <DISKSTATS> api
In the patch referenced below, which purported to make
all the 'GET' macros robust, the 'DISKSTATS_GET' macro
was broken. A necessary parameter wasn't passed to the
subsequently invoked function: procps_diskstats_get().
Reference(s):
commit bef8c7fb70
------------------------------------------------------
library: correct a broken 'sort' func, <DISKSTATS> api
In the commit shown below, an attempt to normalize the
errno handling, the sort function inadvertently lost 1
crucial line of code which produces a consistent SEGV.
Reference(s):
commit 06be33b43e
Signed-off-by: Jim Warner <james.warner@comcast.net>
Since the patch referenced below traded a compile-time
'sizeof' directive for a run-time 'strlen' call, there
is no need to declare lxc patterns as explicit arrays.
We'll also use the actual lxc patterns by omitting the
beginning slashes ('/') for both of those definitions.
And, looking to the future when most/all lxc users are
using the most recent lxc release, we will make things
slightly more efficient by reversing those two pattern
literals so the most recent pattern was checked first.
Of course, such a change only benefits tasks which are
running in a container. For the majority of processes,
both literals will be compared in that 'if' statement,
assuming the 'LXC' field is currently being displayed.
[ plus, a leftover parenthesis pair has been removed ]
Reference(s):
commit 288d759b8b
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch just polishes the 'origin' comments for the
<STAT> header file. In particular those derived/unique
items (the 'SUM' guys) will now be properly explained.
[ in order to employ the 'derived from above' phrase ]
[ with their DELTA versions, all SUM items had to be ]
[ relocated (and some renamed). in turn, that had an ]
[ impact on many portions of the .c source file too. ]
Reference(s):
. summary calculations introduced
commit 2c86c4984a
. origins added to header files
commit 96d59cbf46
Signed-off-by: Jim Warner <james.warner@comcast.net>
This small change is an outgrowth of the research into
the bug represented by that merge request shown below.
With the master branch, a real buglet was subsequently
addressed. In this newlib branch, no bug existed since
the <stat> API relies solely on just cpus reflected in
(and parsed from) the kernel's /proc/stat pseudo file.
[ since that procps_stat_new() priming read about to ]
[ be performed will value info->cpus.total, there is ]
[ no need to separately invoke a procps_cpu_count(). ]
Reference(s):
https://gitlab.com/procps-ng/procps/merge_requests/82
Signed-off-by: Jim Warner <james.warner@comcast.net>
The merge request shown below prompted (thankfully) an
examination of our lxc containers logic in readproc.c.
As it turns out, the lxc folks changed that eyecatcher
used to identify containers within a task cgroup file.
So this patch, with little extra cost, will enable the
libprocps lxc_containers() guy to handle both strings.
[ additionally, I was shocked to find lxc allows the ]
[ eyecatcher to be changed at ./configure time. such ]
[ a provision has always existed. unfortunately, the ]
[ changed value was only available to root, assuming ]
[ one wished to tackle that undocumented liblxc api. ]
Reference(s):
. what prompted lxc support reevaluation
https://gitlab.com/procps-ng/procps/merge_requests/82
. original lxc support introduced
commit 0557504f9c
Signed-off-by: Jim Warner <james.warner@comcast.net>
A lack of documentation seems to be the major obstacle
to releasing this new library. So, in an effort to get
the ball rolling again, this patch adds the origins of
each item as a comment to six of the new header files.
However, before reviewing how such changes may benefit
that documentation objective, it seemed appropriate to
first reflect on newlib's background & current status.
___________________________________________ BACKGROUND
Discussions about and work on a new library began back
in July 2012 but quickly died. After a lull of 2 years
those discussions were resumed in August 2014 but soon
died also (and no code survived the gitorious demise).
With those early discussions, the recommended approach
was to encapsulate all of the libprocps data offerings
in individual functions. When it came to extensibility
it was suggested we should rely on symbols versioning.
Unfortunately that approach would have made for a huge
Application Programming Interface virtually impossible
to master or even document. And, runtime call overhead
would have been substantial for ps and especially top.
So, an alternative design was sought but there were no
new suggestions/contributions via freelists or gitlab.
Thus, in spite of a lack of library design experience,
the procps-ng team (Craig & Jim) set out to develop an
alternative API, more concise and with lower overhead.
Reference(s):
. 07/01/2012, begin library design discussion
https://www.freelists.org/post/procps/Old-library-calls
. 08/12/2014, revival of library design discussion
https://www.freelists.org/post/procps/libprocs-redesign
_____________________________________ DESIGN EVOLUTION
Our newlib branch first appeared on June 14, 2015. And
our current API actually represents the 4th generation
during the past 3 years of evolution. First, there was
a basic 'new', 'get' and 'unref' approach, using enums
to minimize the proliferation of 'get' function calls.
Then, in anticipation of other programs like ps, where
multiple fields times multiple processes would greatly
increase the number of 'get' function calls, a concept
of 'chains' was introduced. This became generation #2.
Such 'chains' proved unnecessarily complex so 'stacks'
replaced them. This was considered the 3rd generation,
but too many implementation details were still exposed
requiring those users to 'alloc', 'read', 'fill', etc.
Finally, a 4th generation emerged representing several
refinements to standardize and minimize those exported
functions, thus hiding all implementation details from
the users. Lastly, handling of 'errno' was normalized.
Reference(s):
. 06/14/2015, revival of new API discussion
https://www.freelists.org/post/procps/The-library-API-again
. 06/24/2015, birth of the newlib branch
https://www.freelists.org/post/procps/new-library
. 06/29/2015, 2nd generation introduced 'chains'
https://www.freelists.org/post/procps/new-library,8
. 07/22/2015, 3rd generation introduced 'stacks'
https://www.freelists.org/post/procps/newlib-stacks-vs-chains
. 06/18/2016, 4th generation refinements begin
https://www.freelists.org/post/procps/newlib-generation-35
. 11/10/2017, 4th generation standardized 'errno'
https://www.freelists.org/post/procps/some-more-master-newlib-stuff
_______________________________________ CURRENT DESIGN
Central to this new design is a simple 'result' struct
reflecting an item plus its value (thanks to a union).
As a user option, these item structures can be grouped
into 'stacks', yielding many results with just 1 call.
Such a 'stack' can be seen as a variable length record
whose content/order is determined solely by the users.
Within that 'result' structure, the union has standard
C language types so there is never a doubt how a value
should be used in a printf statement. Given that linux
requires a least a 32-bit platform the only difference
in capacity surrounds 'long' integers. And, where such
types might be used, the 32-bit maximums are adequate.
The items themselves are simply enumerators defined in
the respective header files. A user can name any items
of interest then the library magically provides result
structure(s). The approach was proven to be extensible
without breaking the ABI (in commit referenced below).
The 6 major APIs each provide for the following calls:
. 'new' ---------> always required as the first call .
. 'ref' -------------------------> strictly optional .
. 'unref' --------> optional, if ill-behaved program .
. 'get' --------------------> retrieve a single item .
. 'select' ----------------> retrieve multiple items .
And the 'get' and 'select' functions provide for delta
results representing the difference between successive
get/select calls (or a 'new' then 'get/select' call).
For the <diskstats>, <pids>, <slabinfo> & <stat> APIs,
where results are unpredictable, a 'reap' function can
return multiple result structures for multiple stacks.
The <pids> API differs from others in that those items
of interest must be provided at 'new' or 'reset' time,
a function unique to this API. And the <pids> 'select'
function requires PIDs or UIDs which are to be fetched
which then operates as a subset of 'reap'. Lastly, the
'get' function is an iterator for successive PIDs/TIDs
returning items previously identified via 'new/reset'.
To provide assistance to users during development, the
special header 'proc/xtra-procps-debug.h' is available
to check type usage against library expectations. That
check is activated by including this header explicitly
or via build using: ./configure '-DXTRA_PROCPS_DEBUG'.
Reference(s):
. 08/05/2016, type validation introduced
https://www.freelists.org/post/procps/newlib-types-validation
commit e3270d463d
. 08/11/2016, extensibility while preserving ABI example
https://www.freelists.org/post/procps/new-meminfo-fields
commit 09e1886c9e
_________________________ INITIAL DOCUMENTATION EFFORT
The initial attempt, referenced below, dealt primarily
with the <pids> interface. Separate man pages for each
exported function were created. Plus there was another
document describing the items, among other miscellany.
Adopting such an approach encounters several problems:
1. In order to use these man pages, users are required
to already know how to use the library. Or alternately
one could randomly search each of them while trying to
ascertain which function call satisfies their need and
what exactly was the proper compliment/order required.
2. While we can explain what all of those <pids> items
represent, that certainly isn't true for all the APIs.
See the gaps in kernel documentation for <meminfo> and
complete lack of documentation with that <vmstat> API.
3. Our documentation effort should take pains to avoid
unnecessary implementation details. Here's an example:
. "The pointer to info will have memory"
. "allocated and a structure created."
Alternatively, the following conveys user requirements
while not offering any internal implementation detail:
. "You must provide the address of a NULL"
. "info structure pointer."
Reference(s):
. 01/04/2017, initial documentation offering
https://www.freelists.org/post/procps/Using-reap-and-get
commit 2598e9f2ce
___________________ RECOMMENDED DOCUMENTATION APPROACH
I recommend that the newlib documentation consist of 3
man pages only. The first would cover the 5 major APIs
and their common functions. The second would deal with
the <pids> API exclusively, explaining how it differs.
Any remaining exported libproc functions which are yet
to be included could be represented in a 3rd document.
For these new documents the following are are assumed:
1. Since we will not be able to document all items, we
shouldn't try to document any items. We should instead
rely on proc(5) or Documentation/filesystems/proc.txt.
2. Program development often involves referencing some
header file(s). So, make that an absolute requirement.
3. With the addition of item origins, represented with
this commit, and considering that 'types' were already
present, the header file might be all some users need.
4. And who knows, when a user of our libproc complains
about gaps in their documentation, it might prompt the
kernel folks to correct those long standing omissions.
To summarize, I suggest that we replace that libproc.3
document with a more general one explaining the basics
of accessing this new library and the common calls for
most of the major interfaces. We can then create a new
document (libproc-pids.3?), which explains differences
in using the <PIDS> application programming interface.
A final document (libproc-misc.3?) covers what's left.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This change is being made in anticipation of adding the
source origin of each item to the <pids.h> header file.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch will bring the <meminfo> API into line with
that proc(5) document. There were several undocumented
fields that were not noted and these two were omitted:
. 'MmapCopy' was conditional on the #define CONFIG_MMU
. 'Quicklists' depends on the #define CONFIG_QUICKLIST
And we're about to get the following new field in 4.20
which will be represented, at least, in that proc.txt:
. 'KReclaimable' will include SReclaimable plus others
Signed-off-by: Jim Warner <james.warner@comcast.net>
If we ever were to eliminate the procps.h header file,
as discussed in the thread referenced below, then that
would impair the current XTRA_PROCPS_DEBUG provisions.
The only remaining way to verify result types would be
to explicitly include that <proc/xtra-procps-debug.h>.
So, this commit will once again enable the ./configure
provision for defining the -DXTRA_PROCPS_DEBUG option.
Reference(s):
https://www.freelists.org/post/procps/newlib-Qualys-patches,6
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch is the first of three implementing a newlib
branch version of that Jan Rybar master merge request.
With this series we'll ultimately extend 'EXE' support
to both ps and top (plus, everyone else who wants it).
Reference(s):
. master branch merge request
https://gitlab.com/procps-ng/procps/merge_requests/66
Signed-off-by: Jim Warner <james.warner@comcast.net>
Following that patch referenced below, the top SUPGRPS
field would produce a segmentation fault and ps SUPGRP
would often show "(null)". Such problems resulted from
some faulty logic in the status2proc() routine dealing
with 'Groups' (supgid) which served as a source field.
For many processes the original code produced an empty
string which prevented conversion to the expected "-".
Moreover, prior to release 3.3.15 such an empty string
will become 0 after strtol() which pwcache_get_group()
translates to 'root' yielding very misleading results.
So, now we'll check for empty '/proc/#/status/Groups:'
fields & consistently provide a "-" value for callers.
[ we'll also protect against future problems in that ]
[ new qualys logic by always ensuring valid 'supgrp' ]
[ pointers - logic which revealed our original flaw! ]
Reference(s):
. original qualys patch
0071-proc-readproc.c-Harden-supgrps_from_supgids.patch
Signed-off-by: Jim Warner <james.warner@comcast.net>
This refactor was done in response to the Qualys patch
referenced below, which deals with some 'readeither()'
flaws under the master branch. Under our newlib branch
those flaws mostly disappear since the function is now
private. But without a redesign the #define is broken.
When the #define FALSE_THREADS is active, some special
strings showing "[ duplicate ENUM ]" will appear under
each child thread. Note that the real reason for those
appearing isn't being exercised, only their mechanics.
In reality, they only show when a user duplicates such
enums in a results stack & only 1 instance can own it.
Reference(s):
. original qualys patch
0084-proc-readproc.c-Work-around-a-design-flaw-in-readeit.patch
. QUICK_THREADS became FALSE_THREADS
commit c546d9dd44
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the new library 'cmd' is dynamically allocated just
like 'cmdline'. This will align us with the ref below.
Reference(s):
. master branch increase to 64
commit 2cfdbbe897
Signed-off-by: Jim Warner <james.warner@comcast.net>
readeither() caches (in new_p) a pointer to the proc_t of a task-group
leader, but readeither()'s callers can do pretty much anything with the
proc_t structure passed to and/or returned by this function. For
example, they can 1/ free it or 2/ recycle it (by passing it to
readeither() as x).
1/ leads to a use-after-free, and 2/ leads to unexpected behavior when
taskreader()/simple_readtask() is called with new_p equal to x (this is
not a theoretical flaw: 2/ happens in readproctab3() when want_task()
returns false and p is a group leader).
As a workaround, we keep a copy of new_p's first member (tid) in static
storage, and the next times we enter readeither() we check this "canary"
against the tid in new_p: if they differ, we reset new_p to NULL, which
forces the allocation of a new proc_t (the new "leader", or reference).
This always detects 2/ (because free_acquired(x,1) memsets x and hence
new_p); always detects 1/ if freed via free_acquired() and/or freeproc()
(very likely, otherwise memory may be leaked); probably detects 1/ even
if freed directly via free() (because the canary is the first member of
proc_t, likely to be overwritten by free()); but can not detect 1/ if
free() does not write to new_p's chunk at all.
Moreover, accessing new_p->tid to check the canary in case 1/ is itself
a use-after-free, so a better long-term solution should be implemented
at some point (we wanted to avoid intrusive and backward-incompatible
changes in this library function, hence this imperfect workaround).
---------------------------- adapted for newlib branch
. adapted via 'patch' (rejected due to 'xcalloc' ref)
. with loss of both readproctab functions, most no longer true
Signed-off-by: Jim Warner <james.warner@comcast.net>
If QUICK_THREADS is not defined (it is not by default, but most
distributions enable it) and task_dir_missing is true (only on very old
kernels), then readtask() forgets to reset some of the struct proc_t t's
members, which later results in double-free()s in free_acquired().
For now, we simply synchronized the list of members to be reset with the
list of members freed in free_acquired().
---------------------------- adapted for newlib branch
. now 'cmd' is also dynamic
. just synchronized with those freed in free_acquired
. QUICK_THREADS is now FALSE_THREADS, serving different purpose
. entire patch will be effectively reverted with upcoming refactor
Signed-off-by: Jim Warner <james.warner@comcast.net>
Replace xmalloc() with xcalloc().
---------------------------- adapted for newlib branch
. trade xcalloc() for calloc()
. thus we must account for potential ENOMEM
Signed-off-by: Jim Warner <james.warner@comcast.net>
Replace memcpy+strcpy with snprintf.
---------------------------- adapted for newlib branch
. adapted via 'patch' (without rejections)
Signed-off-by: Jim Warner <james.warner@comcast.net>
Check the return value of snprintf(), otherwise dst may point
out-of-bounds when it reaches the end of the dst_buffer (the snprintf()
always returns 1 in that case, even if there is not enough space left),
and vMAX becomes negative and is passed to snprintf() as a size_t.
---------------------------- adapted for newlib branch
. adapted via 'patch (without rejections)
Signed-off-by: Jim Warner <james.warner@comcast.net>
This detects an integer overflow of "strlen + 1", prevents an integer
overflow of "tot + adj + (2 * pSZ)", and avoids calling snprintf with a
string longer than INT_MAX. Truncate rather than fail, since the callers
do not expect a failure of this function.
---------------------------- adapted for newlib branch
. logic is now in pids.c
. former 'vectorize_this_str' is now 'pids_vectorize_this'
Signed-off-by: Jim Warner <james.warner@comcast.net>
1/ Prevent an out-of-bounds write if sz is 0.
2/ Limit sz to INT_MAX, because the return value is an int, not an
unsigned int (and because if INT_MAX is equal to SSIZE_MAX, man 2 read
says "If count is greater than SSIZE_MAX, the result is unspecified.")
3/ Always null-terminate dst (unless sz is 0), because a return value of
0 because of an open() error (for example) is indistinguishable from a
return value of 0 because of an empty file.
4/ Use an unsigned int for i (just like n), not an int.
5/ Check for snprintf() truncation.
---------------------------- adapted for newlib branch
. adapted via 'patch (without rejections)
Signed-off-by: Jim Warner <james.warner@comcast.net>
Note: this is by far the most important and complex patch of the whole
series, please review it carefully; thank you very much!
For this patch, we decided to keep the original function's design and
skeleton, to avoid regressions and behavior changes, while fixing the
various bugs and overflows. And like the "Harden file2str()" patch, this
patch does not fail when about to overflow, but truncates instead: there
is information available about this process, so return it to the caller;
also, we used INT_MAX as a limit, but a lower limit could be used.
The easy changes:
- Replace sprintf() with snprintf() (and check for truncation).
- Replace "if (n == 0 && rbuf == 0)" with "if (n <= 0 && tot <= 0)" and
do break instead of return: it simplifies the code (only one place to
handle errors), and also guarantees that in the while loop either n or
tot is > 0 (or both), even if n is reset to 0 when about to overflow.
- Remove the "if (n < 0)" block in the while loop: it is (and was) dead
code, since we enter the while loop only if n >= 0.
- Rewrite the missing-null-terminator detection: in the original
function, if the size of the file is a multiple of 2047, a null-
terminator is appended even if the file is already null-terminated.
- Replace "if (n <= 0 && !end_of_file)" with "if (n < 0 || tot <= 0)":
originally, it was equivalent to "if (n < 0)", but we added "tot <= 0"
to handle the first break of the while loop, and to guarantee that in
the rest of the function tot is > 0.
- Double-force ("belt and suspenders") the null-termination of rbuf:
this is (and was) essential to the correctness of the function.
- Replace the final "while" loop with a "for" loop that behaves just
like the preceding "for" loop: in the original function, this would
lead to unexpected results (for example, if rbuf is |\0|A|\0|, this
would return the array {"",NULL} but should return {"","A",NULL}; and
if rbuf is |A|\0|B| (should never happen because rbuf should be null-
terminated), this would make room for two pointers in ret, but would
write three pointers to ret).
The hard changes:
- Prevent the integer overflow of tot in the while loop, but unlike
file2str(), file2strvec() cannot let tot grow until it almost reaches
INT_MAX, because it needs more space for the pointers: this is why we
introduced ARG_LEN, which also guarantees that we can add "align" and
a few sizeof(char*)s to tot without overflowing.
- Prevent the integer overflow of "tot + c + align": when INT_MAX is
(almost) reached, we write the maximal safe amount of pointers to ret
(ARG_LEN guarantees that there is always space for *ret = rbuf and the
NULL terminator).
---------------------------- adapted for newlib branch
. there were many formatting differences
. i introduced several myself (especially comments)
. stdlib 'realloc' used, not that home grown xrealloc
. stdlib 'realloc' required extra 'return NULL' statement
Signed-off-by: Jim Warner <james.warner@comcast.net>
1/ Replace sprintf() with snprintf() (and check for truncation).
2/ Prevent an integer overflow of ub->siz. The "tot_read--" is needed to
avoid an off-by-one overflow in "ub->buf[tot_read] = '\0'". It is safe
to decrement tot_read here, because we know that tot_read is equal to
ub->siz (and ub->siz is very large).
We believe that truncation is a better option than failure (implementing
failure instead should be as easy as replacing the "tot_read--" with
"tot_read = 0").
---------------------------- adapted for newlib branch
. no real changes, patch refused due to mem alloc & failure return
Signed-off-by: Jim Warner <james.warner@comcast.net>
1/ Use a "size_t num" instead of an "unsigned num" (also, do not store
the return value of sscanf() into num, it was unused anyway).
2/ Check the return value of strchr() and strrchr().
3/ Never jump over the terminating null byte with "S = tmp + 2".
---------------------------- adapted for newlib branch
. newlib doesn't use that 'unlikely' crap
. the cmd field is now also dynamic (like cmdline)
. thus we must account for potential ENOMEM
Signed-off-by: Jim Warner <james.warner@comcast.net>
1/ Prevent an integer overflow of t.
2/ Avoid an infinite loop if s contains characters other than comma,
spaces, +, -, and digits.
3/ Handle all possible return values of snprintf().
---------------------------- adapted for newlib branch
. we can't use xrealloc(), so we use realloc() instead
. and must account for a mem failure via a return of 1
Signed-off-by: Jim Warner <james.warner@comcast.net>
1/ Do not read past the terminating null byte when hashing the name.
2/ S[x] is used as an index, but S is "char *S" (signed) and hence may
index the array out-of-bounds. Bit-mask S[x] with 127 (the array has 128
entries).
3/ Use a size_t for j, not an int (strlen() returns a size_t).
Notes:
- These are (mostly) theoretical problems, because the contents of
/proc/PID/status are (mostly) trusted.
- The "name" member of the status_table_struct has 8 bytes, and
"RssShmem" occupies exactly 8 bytes, which means that "name" is not
null-terminated. This is fine right now, because status2proc() uses
memcmp(), not strcmp(), but it is worth mentioning.
---------------------------- adapted for newlib branch
. newlib doesn't use that 'unlikely' crap
. newlib also had a '#ifdef FALSE_THREADS'
Signed-off-by: Jim Warner <james.warner@comcast.net>
This function is unused (SIGNAL_STRING is defined by default, and if it
is not, procps does not compile -- for example, there is no "outbuf" in
help_pr_sig()) but fix it anyway. There are two bugs:
- it accepts non-hexadecimal characters (anything >= 0x30);
- "(c - (c>0x57) ? 0x57 : 0x30)" is always equal to 0x57.
---------------------------- adapted for newlib branch
. newlib doesn't use that 'unlikely' crap
Signed-off-by: Jim Warner <james.warner@comcast.net>
This solves several problems:
1/ outbuf[1] was written to, but not outbuf[0], which was left
uninitialized (well, SECURE_ESCAPE_ARGS() already fixes this, but do it
explicitly as well); we know it is safe to write one byte to outbuf,
because SECURE_ESCAPE_ARGS() guarantees it.
2/ If bytes was 1, the write to outbuf[1] was an off-by-one overflow.
3/ Do not call escape_str() with a 0 bufsize if bytes == overhead.
4/ Prevent various buffer overflows if bytes <= overhead.
Simply rearrange the old comparisons. The new comparisons are safe,
because we know from previous checks that:
1/ wlen > 0
2/ my_cells < *maxcells (also: my_cells >= 0 and *maxcells > 0)
3/ len > 1
4/ my_bytes+1 < bufsize (also: my_bytes >= 0 and bufsize > 0)
This should never happen, because wcwidth() is called only if iswprint()
returns nonzero. But belt-and-suspenders, and make it visually clear
(very important for the next patch).
The SECURE_ESCAPE_ARGS() macro solves several potential problems
(although we found no problematic calls to the escape*() functions in
procps's code-base, but had to thoroughly review every call; and this is
library code):
1/ off-by-one overflows if the size of the destination buffer is 0;
2/ buffer overflows if this size (or "maxroom") is negative;
3/ integer overflows (for example, "*maxcells+1");
4/ always null-terminate the destination buffer (unless its size is 0).
---------------------------- adapted for newlib branch
. the escape.c now has just a single exported function
. thus SECURE_ESCAPE_ARGS() is needed in only 2 places
. unlike that original patch, macro is executed 1 time
( not like 'escape_command' calling 'escape_strlist' )
( which might then call 'escape_str' multiple times! )
Signed-off-by: Jim Warner <james.warner@comcast.net>
In the human_readable case; otherwise the strcat() that follows may
append bytes to the previous contents of buf.
Also, slightly enlarge buf, as it was a bit too tight.
Could also replace all sprintf()s with snprintf()s, but all the calls
here output a limited number of characters, so they should be safe.
---------------------------- adapted for newlib branch
. the source file is now proc/uptime.c
. function is now named 'procps_uptime_sprint()'
. new human readable function 'procps_uptime_sprint_short()'
. both were already initialized, so just raised size of 2 buffers
Signed-off-by: Jim Warner <james.warner@comcast.net>
In proc/slab.c, functions parse_slabinfo20() and parse_slabinfo11(),
sscanf() might overflow curr->name, because "String input conversions
store a terminating null byte ('\0') to mark the end of the input; the
maximum field width does not include this terminator."
Add one byte to name[] for this terminator.
---------------------------- adapted for newlib branch
. file is now proc/slabinfo.c (not .h)
. manifest constant renamed SLABINFO_NAME_LEN
. older parse_slabinfo11() function no longer present
Signed-off-by: Jim Warner <james.warner@comcast.net>
When 'newlib' was introduced, in the commit referenced
below, the use of that glibc '__BEGIN_DECLS' macro was
standardized. However, as issue #88 revealed, this may
result in a fatal build error with other environments.
So, this patch just trades that macro for the standard
'#ifdef __cplusplus' conventions (thus avoiding use of
all those '#include <features.h>' directives as well).
Reference(s):
. newlib introduced
commit a410e236ab
. procps-ng-3.3.13 issue
https://gitlab.com/procps-ng/procps/issues/88
. some additional discussion
https://www.freelists.org/post/procps/PATCH-Replace-glibcspecific-macros-in-procnumah,1
. musl wiki (see: sys/cdefs.h error messages)
https://wiki.musl-libc.org/faq.html
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch simply eliminates that glibc specific macro
from all header files which contain no public callable
functions. After all, if user code can't link to them,
then protection from C++ name mangling is unnecessary.
[ we also remove any related '#include <features.h>' ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Now that the procio logic was removed from the library
we must move the header file, lest we break make dist.
In the process, we will relocate that source file too.
[ we'll take a slightly different approach than that ]
[ used under the master branch by exploiting those 2 ]
[ non-library directories 'include' and 'lib', while ]
[ avoiding any sysctl hard coded function prototype. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
The procio functions that were in the library have been
moved into sysctl. sysctl is not linked to libprocps in
newlib and none of the other procps binaries would need
to read/write large data to the procfs.
References:
be6b048a41
to be able to read and write large buffers below /proc.
The buffers and file offsets are handled dynamically
on the required buffer size at read, that is lseek(2)
is used to determine this size. Large buffers at
write are split at a delimeter into pieces and also
lseek(2) is used to write each of them.
Signed-off-by: Werner Fink <werner@suse.de>
With the documentation update in the commit referenced
below, we should also account for such threads as they
will already be represented in the task/thread totals.
[ and do it in a way that might avoid future changes ]
Reference(s):
commit 91df65b9e7
Signed-off-by: Jim Warner <james.warner@comcast.net>
This removes the following error by stating the task ID can only be 10
characters wide, as it is an integer.
proc/readproc.c: In function ‘simple_nexttid’:
proc/readproc.c:1185:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size between 41 and 51 [-Wformat-truncation=]
snprintf(path, PROCPATHLEN, "/proc/%d/task/%s", p->tgid, ent->d_name);
^~
proc/readproc.c:1185:3: note: ‘snprintf’ output between 14 and 279 bytes into a destination of size 64
snprintf(path, PROCPATHLEN, "/proc/%d/task/%s", p->tgid, ent->d_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This commit removes some obsolete parameter validation
code which was needed back when certain functions were
public, called directly by users (1st/2nd generation).
Now that they're static they can be safely eliminated.
Signed-off-by: Jim Warner <james.warner@comcast.net>
With older library logic having been modified to avoid
using those potentially deadly alloc.h routines, while
improving 'errno' handling, we're ready to standardize
and enhance newlib's approach to any potential errors.
In so doing, we'll establish the following objectives:
. . . . . . . . . . . . . functions returning an 'int'
. an error will be indicated by a negative number that
is always the inverse of some well known errno.h value
. . . . . . . . . . . functions returning an 'address'
. any error will be indicated by a NULL return pointer
with the actual reason found in the formal errno value
And, when errno is manipulated directly we will strive
to do so whenever possible within those routines which
have been declared with PROCPS_EXPORT. In other words,
in the user callable functions defined in source last.
[ But, that won't always be possible. In particular, ]
[ all the 'read_failed' functions will sometimes set ]
[ 'errno' so that they can serve callers returning a ]
[ NULL or an int without duplicating a lot of logic. ]
[ Also, that includes one subordinate function which ]
[ was called by 'read_failed' in the <slabinfo> API. ]
------------------------------------------------------
Along the way, several additional miscellaneous issues
were addressed. They're listed here now for posterity.
. the '-1' return value passed outside the library was
eliminated since it would erroneously equate to -EPERM
. the stacks_fetch functions in <diskstats> and <stat>
weren't checked for their possible minus return values
. hash create was not checked in <meminfo> or <vmstat>
. fixed 'new' function faulty parm check in <slabinfo>
Signed-off-by: Jim Warner <james.warner@comcast.net>
While that old master branch library may utilize those
memory allocation functions found in the alloc module,
it was inappropriate for this newlib branch to subject
callers to a stderr message followed by an early exit.
Of course, the old libprocps offered a message handler
override provision (xalloc_err_handler) but that, too,
would seem to be inappropriate for our modern library.
[ remember the battles fought with that damn libnuma ]
So, this commit will tweak those old inherited sources
setting the stage for standardized return values/errno
settings in connection with a memory allocation error.
------------------------------------------------------
Along the way, we'll address the following miscellany:
. Completely eliminate usage of anything from alloc.h.
This, of course, entails our own error checking of the
alternative allocation calls from stdlib.h & string.h.
. Eliminate use of the strdup function where possible,
as with 'procps_uptime' and 'procps_loadavg' routines.
. Whack some obsolete code (getslabinfo) in sysinfo.c.
Signed-off-by: Jim Warner <james.warner@comcast.net>
. ensure whitespace exists between the code & comments
[ changing txt slightly keeps right margin alignment ]
. strive for more consistency with some comment styles
[ don't use C '/*' style where C++ '//' style exists ]
. removed the instance of double space in 1 assignment
[ still striving for consistency in whitespace usage ]
. fixed comment relating to number of 'derived fields'
[ the <meminfo> api recently added one new such enum ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch just rearranges 1 item in the stacks_extent
struct to make it equivalent to all the other modules.
Signed-off-by: Jim Warner <james.warner@comcast.net>
As an oversight, delta values for SWAP amounts weren't
included in the <meminfo> API. Since any runtime costs
of including them only amount to slightly more storage
this commit will simply correct the earlier oversight.
Signed-off-by: Jim Warner <james.warner@comcast.net>
When supplying the -p command to uptime, it does not display any
sections where the value is less than 1; however, after a reboot, this
causes the command to just output "up". Showing 0 minutes when the
system has been up for less than a minute makes it clear a reboot just
occurred.
References:
commit 325d68b7c3
Signed-off-by: Craig Small <csmall@enc.com.au>
Awhile back, that former QUICK_THREADS #define evolved
into the development (only) FALSE_THREADS which can be
used to ensure a 'duplicate ENUM' convention is output
when certain string fields can't be easily duplicated.
Unfortunately, that original implementation was marred
with zeros being displayed for /proc/$$/meminfo fields
in all the child threads for a multi-threaded process.
So this commit corrects that zero memory field buglet.
Reference(s):
. QUICK_THREADS becomes FALSE_THREADS
commit c546d9dd44
Signed-off-by: Jim Warner <james.warner@comcast.net>
The <meminfo> module attempted to duplicate the former
sysinfo memory calculations wherein 'SReclaimable' was
added to 'Cached' for the 'kb_main_cached' equivalent.
But, this original approach was wrong for two reasons.
1. The addition occurred too late to impact the 'USED'
calculation which could then cause an underflow in the
top memory display if 'SReclaimable' was heavily used.
2. In changing the actual /proc/meminfo 'Cached' value
it meant that users could not rely on that proc(5) man
page when interpreting the MEMINFO_MEM_CACHED results.
So this commit adds a new enumerator for the inclusive
cached amount plus repositions the calculation so that
a MEMINFO_MEM_USED result will exclude 'SReclaimable'.
Signed-off-by: Jim Warner <james.warner@comcast.net>
In response to that suggestion referenced below, these
changes allow display of task/thread level NUMA nodes.
Currently, only the 'top' program offers any NUMA type
support and it is limited to the Summary Area display.
With this commit both the 'top' and 'ps' programs will
be able to display NUMA nodes associated with threads.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/58
Signed-off-by: Jim Warner <james.warner@comcast.net>
Reference(s):
proc/readproc.c: In function 'statm2proc'
proc/readproc.c:600:9: warning: variable 'num' set but not used [-Wunused-but-set-variable]
proc/stat.c: In function 'stat_derive_unique':
proc/stat.c:429:1: warning: no return statement in function returning non-void [-Wreturn-type]
ps/parser.c: In function 'arg_type':
ps/parser.c:1098:3: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
ps/parser.c:1099:34: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
lib/signals.c: In function 'strtosig':
lib/signals.c:243:9: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
lib/signals.c:245:13: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
slabtop.c: In function 'print_summary':
slabtop.c:223:29: warning: unused variable 'stats' [-Wunused-variable]
watch.c: In function 'process_ansi':
watch.c:232:5: warning: this 'if' clause does not guard... [-Wmisleading-indentation]
watch.c:235:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
Signed-off-by: Jim Warner <james.warner@comcast.net>
When those standardized 'derived' TIC enumerators were
introduced, a problem with potential DELTA distortions
was also introduced when toggling cpus offline/online.
It has always been true that the 1st (summary) line in
/proc/stat will experience a decrease in total tics if
a new cpu is brought online. Such decreases are mostly
due to reductions in 'idle' and 'iowait' tics. Exactly
why such a counterintuitive phenomenon should occur is
a mystery, but this has been acknowledged in proc.txt.
A separate potential distortion arises with individual
cpus. And, here it extends to both bringing processors
online plus taking them offline too. When that happens
the order of the cpus array tracking is upset, placing
the 'new' values in some other processor's array slot.
But even if we were to occupy the same slot, the issue
regarding reductions in 'idle' & 'iowait' still apply.
In all cases, when a DELTA field was found to be minus
it was forced to zero via the 'TICsetH' macro. However
the 'derived' calculations are subject to new forms of
distortion with their own DELTA values. For example we
could find DELTA_SUM_USER + DELTA_SUM_SYSTEM exceeding
DELTA_SUM_TOTAL, an illogical/inappropriate condition.
So this commit moves former protections for individual
cpus to the stat_derive_unique() function and modifies
it to also extend protections to the 'derived' values.
In the process we now protect the cpu 'summary' counts
which were unfortunately previously overlooked (oops).
Reference(s):
. 'derived' types introduced
commit 2c86c4984a
Since its introduction, our evolved /proc/stat API has
relied on a static buffer of 8192 bytes. This approach
is probably Ok for other /proc files but it would only
accommodate around 100 processors. If such a threshold
were exceeded then this interface could never succeed.
Now days 100 processors doesn't seem at all excessive.
So this commit trades that static buffer for a dynamic
self-tuning one. And since so much former top CPU code
was already rolled into this module, we just stole the
already proven top dynamic buffer management code too.
[ this also meant switching low level unbuffered I/O ]
[ calls to standard library buffered I/O calls. that ]
[ is exactly what <slabinfo> and <diskstats> employ. ]
Reference(s):
. 1st gen readstat introduction
commit a410e236ab
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the addition of those new derived SUM values, any
CPUs taken offline or brought online would distort the
historical (delta) results. So this patch just forces
a history reset when such transitions are encountered.
Reference(s):
. derived SUM provisions introduced
commit 2c86c4984a
Signed-off-by: Jim Warner <james.warner@comcast.net>
For each of those interfaces employing a priming read,
all the other 'read' functions begin with the module's
name except this guy which began with 'read_slabinfo'.
Now, they'll all begin with their module name then end
the same with a '_read_failed' boolean hinting suffix.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Upon reflection, at the point where the 'priming read'
was introduced, any possibility of history distortions
was also eliminated. This was true because all of the
'old' (zeroed) data will have been replaced with 'new'
data whenever a user finally calls get, select & reap.
Thus, any DELTA values will automatically reflect that
interval between 'new' and subsequent retrieval calls.
[ diskstats didn't actually employ a 1st time switch ]
[ like the others so we have changed a comment only. ]
[ but that module will retain something similar used ]
[ inside node_update whenever a new node is created. ]
Reference(s):
. priming read added to slabinfo
commit 5d5a52a380
. priming read added to diskstats
commit ecd64f4445
. priming read added to meminfo, stat, vmstat
commit 1a2b62c779
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit arose out of the discussion (and research)
surrounding the issue cited below. It is an attempt to
consolidate and standardize the calculation of jiffies
categories (e.g. 'idle', 'busy', etc.) once & for all.
Also included is the enum STAT_TIC_NUM_CONTRIBUTORS in
case anyone, in the future, decides to calculate usage
based upon elapsed time * Hz (like top does in process
level %CPU stats). In such an event, a total number of
CPUs or NUMA Nodes would be needed for proper scaling.
Reference(s):
https://gitlab.com/procps-ng/procps/issues/48
Signed-off-by: Jim Warner <james.warner@comcast.net>
Unlike the ps kludge under the master branch to ensure
that namespaces appear the same under both 32 & 64-bit
models, this newlib branch already used a proper type.
However source data still carried the original type as
'signed long' versus that more proper 'unsigned long'.
So, this patch makes sources & destinations identical.
Reference(s):
. master branch ps kludge
commit c41c614b0c
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit will resolve the RedHat Bugzilla #1322111.
[ import from identical commit against master branch ]
[ but without trailing whitespace, thank you so much ]
Imported by: Jim Warner <james.warner@comcast.net>
In each module employing a priming read at 'new' time,
should that read fail, a call to 'unref' will be made.
However, there is a hidden dependency that these calls
must never occur before the context 'refcount' was set
due to the way an 'unref' conditional was constructed.
So this commit just ensures that 'unref' will function
as expected, even if called with a 'refcount' of zero.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Removing the Item_table 'stat' oldflags for WCHAN_ADDR
was wrong since that 'stat' field is not a constant 0.
Rather, it could assume these 3 values: -1, 0, and +1.
I have not been able to pin down a '-1' result, but it
probably means some sort of permission error (-EPERM).
The '1' or '0' values were supposed to distinguish the
tasks that were or were not blocked (whether there was
a wchan address). However, in practice there is little
correlation between those values and availability of a
kernel symbol in /proc/$$/wchan (perhaps due to race).
Anyway, the real point is that a 'stat' wchan does not
now intentionally contain an address. Thus, outputting
'ffffff', '-' or '1' in programs like ps is senseless.
So this patch just eliminates PIDS_WCHAN_ADDR from our
item enumerators leaving only the PIDS_WCHAN_NAME guy.
Now the new library can't be blamed for bad addresses!
Reference(s):
. removed Item_table 'oldflags'
commit c4aa6c0ab4
. linux removal of wchan addresses
commit b2f73922d119686323f14fbbe46587f863852328
Signed-off-by: Jim Warner <james.warner@comcast.net>
It seems inappropriate to blindly include fields known
to always be zero in our brand new library. Therefore,
this patch removes support for three such enumerators.
[ that stat 'it_real_value' (PIDS_ALARM) field could ]
[ have been made obsolete before a linux 2.6 release ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just contains some tweaks to comments plus
a few adjustments to whitespace for alignment purposes
and a normalization of the header inclusion #define's.
[ plus a spelling error in one header file was fixed ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
When this module was upgraded to 3rd generation in the
patch referenced below, numa node support was migrated
from the top program into newlib. The 'guest_nice' and
'guest' tics were overlooked as top did not need them.
So, this commit corrects that oversight and achieves a
proper symmetry between the cpu & numa jiffies counts.
Reference(s):
. 3rd gen redesign, numa support imported
commit abc71a46ad
Signed-off-by: Jim Warner <james.warner@comcast.net>
A priming read at 'new' time in that <slabinfo> module
was important so that permission problems are detected
early. Plus, it also had the potential of making delta
values valid when 'get' or 'select' were first called.
It is for that latter reason that such a read was also
incorporated in the <diskstats> module 'new' function.
No other module, however, employed such priming reads.
This patch just brings those potential benefits to all
of our other newlib modules with the exception of that
<pids> guy. That module is, of necessity, sufficiently
different from those others to justify such exclusion.
Not only are there precious few DELTA enums in <pids>,
but the costs of a priming read would be much greater.
[ otherwise, these newly added priming reads have no ]
[ measurable negative impact on performance/timings. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
The <slabinfo> header provides 3 groups of enumerators
with prefixes of SLABINFO, SLABS & SLABNODE. The first
is strictly user oriented & isn't supported internally
by any structure. The other two, however, have structs
associated with 'em but, unfortunately, 1 is misnamed.
The 'struct slabs_node' is associated with 'nodes' and
supports the enumerators with the SLABNODE prefix. But
the 'struct slabs_hist' was associated with 'hist' yet
supports those enumerators with just the SLABS prefix.
We do not care very much what some structure is called
but we do care about an identifier used manipulate it.
This patch will trade the 'hist' identifier associated
with 'struct slabs_hist' for a more congruous 'slabs'.
[ it's awful when the author can't remember what the ]
[ true meaning of an identifier is after creating it ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
If, in fact, numa nodes are dynamic (like that current
total of on-line cpus) the existing logic was lacking.
It included an early return before checking the total.
So, this commit ensures that the nodes total is always
set or updated consistently in only a single function.
There's no need to set it at the time 'new' is called.
[ and since under our existing code this nodes total ]
[ could never possibly have been zero, the erroneous ]
[ test (with the early return) has now been whacked! ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Still unhappy with a minor memory leak associated with
libnuma, I experimented with omitting the dlclose that
was issued at module's end. For some reason which will
remain a mystery, the valgrind leak then went bye-bye.
So this patch just omits one use of dlclose and relies
on whatever kernel magic is at work to free the memory
when each process ends. We kept, however, the original
code (now commented-out) to serve as a future caution.
There remains one potential (but unlikely) dlclose use
near the original dlopen. But there will be no leak as
that 'numa_node_of_cpu' will not yet have been called.
This seems to be the culprit that triggers such leaks.
None of this libnuma shit would likely have come close
to hitting our fan had the numa developers provided us
with 'new' and 'unref' functions like our newlib does.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Recent profiling and timings have resulted in improved
newlib performance. This patch completes that process.
It just normalizes naming conventions employed for all
allocations involving reaped stacks & history support.
The modules offering a 'reap' function will also offer
the now standardized corresponding STACKS_INCR define.
The modules which provide dynamic history support will
now have a separate #define called NEWOLD_INCR used in
allocations/reallocations. And, while values currently
are set equal to that STACKS_INCR value, in the future
some reason for divorcing those two may be discovered.
----------------------------- for future reference ---
In those modules which contain the STACKS_INCR #define
it is tempting to specify a large value so as to avoid
repeated calls to malloc/realloc. However, in doing so
an extra runtime price will be paid in 'cleanup_stack'
calls with any iterative programs like top or slabtop.
So, with the current values a balance has been sought.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Profiling revealed a large amount of time spent in the
'escape_str_utf8' function (escape.c) with both of our
NLS branches (newlib and master). That same result was
not seen under an ancient top-3.2.8 program & library.
Well, the 3.2.8 result was ultimately explained by the
absence of a 'setlocale', necessary under NLS support.
Thus, when that ancient library tested for locale, all
it got was 'ANSI_...' & assumed 'UTF-8' wasn't active.
But after a hack to that ancient code to place it on a
par with newlib/master, I still found cost differences
that led me to revisit an old change referenced below.
It turns out that 'iswprint' costs far more than would
a call of 'isprint', even with the extra support code.
So this commit just reverts that five year old change.
Reference(s):
commit 7b0fc19e9d
Signed-off-by: Jim Warner <james.warner@comcast.net>
