This patch prevents three problems:
1/ Because snprintf() returns "the number of characters (excluding the
terminating null byte) which would have been written to the final string
if enough space had been available", _eol may point past the end of _str
and write out-of-bounds (in Batch mode).
2/ _eol is never checked against _str, so "while (*(--_eol) == ' ');"
may point _eol below _str and write out-of-bounds (in Batch mode).
3/ Sanity-check Pseudo_row to protect the strcpy().
This patch fixes two problems:
1/ In the switch case 0, if sub_end is at the very end of lin[], the two
null-byte writes are off-by-two (a stack-based buffer overflow). Replace
this end-of-string "emulation" with an equivalent test on ch (and then
goto/break out of the loop).
2/ "sub_end += 2" jumps over the null-byte terminator in lin[] if the
line contains a raw (without a tilde) \001-\010 character. Detect such a
null-byte terminator and goto/break out of the loop.
Note: in the case of a raw \001-\010 character, the character at
"sub_end + 1" is never processed (it is skipped/jumped over); this is
not a security problem anymore (since 2/ was fixed), so we decided not
to change this behavior, for backward-compatibility.
- Make sure i is at least 1 before "i - 1" and "--i".
- Initialize endpflg (to 0, as it was originally, since it is static)
before the "for" loop (the "break" may leave endpflg uninitialized,
for example).
pflgsall[] can contain PFLAGSSIZ = 100 elements, each iteration of the
loop can write 3 elements to pflgsall[], and there are EU_MAXPFLGS = 58
iterations: a buffer overflow (it can be triggered via the configuration
file, for example, by filling "fieldscur" with the "sortindx" flag).
The safety of the critical function task_show() depends on the sanity of
Screen_cols. Just copy the tests on w_cols to Screen_cols (from the same
function adj_geometry()).
Several of these buffer overflows can actually be triggered (through the
configuration file for example): in config_file(), inspection_utility(),
and show_special().
The default action for SIGURG is to ignore the signal, for example.
This is very similar to the patch "ps/display.c: Always exit from
signal_handler()."
Every time sortindx is used as an index, or loaded from the
configuration file. Otherwise it leads to out-of-bounds reads and
arbitrary code execution.
Otherwise they may lead to out-of-bounds writes (snprintf() returns the
number of characters which would have been written if enough space had
been available).
Also, make sure buf is null-terminated after COLPLUSCH has been written.
Otherwise they lead to out-of-bounds reads and format-string bugs.
Since these variables are set/written to in several places (for example,
config_file()), check them in the only place where they are read/used.
Also, constify the static gtab[]s.
If the HOME environment variable is not set, or not absolute, use the
home directory returned by getpwuid(getuid()), if set and absolute
(instead of the cwd "."); otherwise, set p_home to NULL.
To keep the changes to a minimum, we rely on POSIX, which requires that
fopen() fails with ENOENT if the pathname (Rc_name) is an empty string.
This integrates well into the existing code, and makes write_rcfile()
work without a change.
Also, it makes the code in configs_read() easier to follow: only set and
use p_home if safe, and only set Rc_name if safe (in all the other cases
it is the empty string, and the fopen() calls fail). Plus, check for
snprintf() truncation (and if it happens, reset Rc_name to the empty
string).
Important note: top.1 should probably be updated, since it mentions the
fallback to the current working directory.
Check the return value of sscanf() to make sure that all input items are
properly initialized.
In extended mode (x_option), one_proc() loads the values of start and
perms during one iteration of the while loop, and displays them during
one of the following iterations, but start and perms are variables local
to the while loop: move them out of the while loop, to the beginning of
the function.
Also, display a mapping only if cp2 is properly initialized; otherwise
(for example), mappings that do not belong to a selected range are
displayed, and with a NULL mapping name:
$ pmap -x -A 6FFF00000000,7FFF00000000 $$
...
Address Kbytes RSS Dirty Mode Mapping
000055b3d1e9b000 0 912 0 r-xp (null)
000055b3d2194000 0 16 16 r--p (null)
000055b3d2198000 0 36 36 rw-p (null)
...
If "cp = strrchr(mapbuf_b, '/')" then this function returns, and
otherwise there is no '/' in mapbuf_b and "cp = strchr(mapbuf_b, '/')"
is always false: remove this second block, since it is never entered.
Also, constify a few things in this function.
In the headers, the space was misplaced; for example, "pmap -XX $$"
outputs "VmFlagsMapping" (without a space). Use justify_print() instead
of printf().
There was also an extra space in the output, because vmflags[] (from the
"VmFlags:" line) always ends with a space. Overwriting this last space
with a null byte fixes this misalignment.
vmflags[] is a 27*(2+1)=81 char array, but there are 30 flags now (not
27), and even with 27 flags this was an off-by-one overflow (the kernel
always outputs a flag with "%c%c ", so the last +1 is for a space, not
for the terminating null byte). Protect vmflags[] with a maximum field
width, as in the surrounding sscanf() calls.
Otherwise "the contents of the array remain unchanged and a null pointer
is returned" or "the array contents are indeterminate and a null pointer
is returned".
readeither() caches (in new_p) a pointer to the proc_t of a task-group
leader, but readeither()'s callers can do pretty much anything with the
proc_t structure passed to and/or returned by this function. For
example, they can 1/ free it or 2/ recycle it (by passing it to
readeither() as x).
1/ leads to a use-after-free, and 2/ leads to unexpected behavior when
taskreader()/simple_readtask() is called with new_p equal to x (this is
not a theoretical flaw: 2/ happens in readproctab3() when want_task()
returns false and p is a group leader).
As a workaround, we keep a copy of new_p's first member (tid) in static
storage, and the next times we enter readeither() we check this "canary"
against the tid in new_p: if they differ, we reset new_p to NULL, which
forces the allocation of a new proc_t (the new "leader", or reference).
This always detects 2/ (because free_acquired(x,1) memsets x and hence
new_p); always detects 1/ if freed via free_acquired() and/or freeproc()
(very likely, otherwise memory may be leaked); probably detects 1/ even
if freed directly via free() (because the canary is the first member of
proc_t, likely to be overwritten by free()); but can not detect 1/ if
free() does not write to new_p's chunk at all.
Moreover, accessing new_p->tid to check the canary in case 1/ is itself
a use-after-free, so a better long-term solution should be implemented
at some point (we wanted to avoid intrusive and backward-incompatible
changes in this library function, hence this imperfect workaround).
If an integer overflow is about to be reached, call xalloc_err_handler()
(since it would have been caught by calloc() or reallocarray()) and then
exit(): these integer overflows are far from reachable, with the current
PID_MAX_LIMIT (2^22), so if they are there is something very wrong going
on. Note: we check the n_*alloc variables against INT_MAX even when they
are size_t because they are later stored as int in a struct proc_data_t.
If QUICK_THREADS is not defined (it is not by default, but most
distributions enable it) and task_dir_missing is true (only on very old
kernels), then readtask() forgets to reset some of the struct proc_t t's
members, which later results in double-free()s in free_acquired().
For now, we simply synchronized the list of members to be reset with the
list of members freed in free_acquired().
The memset() in the PROC_LOOSE_TASKS loop leaves a struct proc_t
uninitialized (the one at data+n_used), which leads to a use-after-free.
ps calls readproctab2(), but only if !TF_loose_tasks, and this U-A-F is
triggered only if PROC_LOOSE_TASKS, so there seems to be no vulnerable
call in the procps package itself (other users of the libprocps may be
vulnerable, though).
Check the return value of snprintf(), otherwise dst may point
out-of-bounds when it reaches the end of the dst_buffer (the snprintf()
always returns 1 in that case, even if there is not enough space left),
and vMAX becomes negative and is passed to snprintf() as a size_t.
This detects an integer overflow of "strlen + 1", prevents an integer
overflow of "tot + adj + (2 * pSZ)", and avoids calling snprintf with a
string longer than INT_MAX. Truncate rather than fail, since the callers
do not expect a failure of this function.
1/ Prevent an out-of-bounds write if sz is 0.
2/ Limit sz to INT_MAX, because the return value is an int, not an
unsigned int (and because if INT_MAX is equal to SSIZE_MAX, man 2 read
says "If count is greater than SSIZE_MAX, the result is unspecified.")
3/ Always null-terminate dst (unless sz is 0), because a return value of
0 because of an open() error (for example) is indistinguishable from a
return value of 0 because of an empty file.
4/ Use an unsigned int for i (just like n), not an int.
5/ Check for snprintf() truncation.
Note: this is by far the most important and complex patch of the whole
series, please review it carefully; thank you very much!
For this patch, we decided to keep the original function's design and
skeleton, to avoid regressions and behavior changes, while fixing the
various bugs and overflows. And like the "Harden file2str()" patch, this
patch does not fail when about to overflow, but truncates instead: there
is information available about this process, so return it to the caller;
also, we used INT_MAX as a limit, but a lower limit could be used.
The easy changes:
- Replace sprintf() with snprintf() (and check for truncation).
- Replace "if (n == 0 && rbuf == 0)" with "if (n <= 0 && tot <= 0)" and
do break instead of return: it simplifies the code (only one place to
handle errors), and also guarantees that in the while loop either n or
tot is > 0 (or both), even if n is reset to 0 when about to overflow.
- Remove the "if (n < 0)" block in the while loop: it is (and was) dead
code, since we enter the while loop only if n >= 0.
- Rewrite the missing-null-terminator detection: in the original
function, if the size of the file is a multiple of 2047, a null-
terminator is appended even if the file is already null-terminated.
- Replace "if (n <= 0 && !end_of_file)" with "if (n < 0 || tot <= 0)":
originally, it was equivalent to "if (n < 0)", but we added "tot <= 0"
to handle the first break of the while loop, and to guarantee that in
the rest of the function tot is > 0.
- Double-force ("belt and suspenders") the null-termination of rbuf:
this is (and was) essential to the correctness of the function.
- Replace the final "while" loop with a "for" loop that behaves just
like the preceding "for" loop: in the original function, this would
lead to unexpected results (for example, if rbuf is |\0|A|\0|, this
would return the array {"",NULL} but should return {"","A",NULL}; and
if rbuf is |A|\0|B| (should never happen because rbuf should be null-
terminated), this would make room for two pointers in ret, but would
write three pointers to ret).
The hard changes:
- Prevent the integer overflow of tot in the while loop, but unlike
file2str(), file2strvec() cannot let tot grow until it almost reaches
INT_MAX, because it needs more space for the pointers: this is why we
introduced ARG_LEN, which also guarantees that we can add "align" and
a few sizeof(char*)s to tot without overflowing.
- Prevent the integer overflow of "tot + c + align": when INT_MAX is
(almost) reached, we write the maximal safe amount of pointers to ret
(ARG_LEN guarantees that there is always space for *ret = rbuf and the
NULL terminator).
1/ Replace sprintf() with snprintf() (and check for truncation).
2/ Prevent an integer overflow of ub->siz. The "tot_read--" is needed to
avoid an off-by-one overflow in "ub->buf[tot_read] = '\0'". It is safe
to decrement tot_read here, because we know that tot_read is equal to
ub->siz (and ub->siz is very large).
We believe that truncation is a better option than failure (implementing
failure instead should be as easy as replacing the "tot_read--" with
"tot_read = 0").
1/ Use a "size_t num" instead of an "unsigned num" (also, do not store
the return value of sscanf() into num, it was unused anyway).
2/ Check the return value of strchr() and strrchr().
3/ Never jump over the terminating null byte with "S = tmp + 2".
1/ Prevent an integer overflow of t.
2/ Avoid an infinite loop if s contains characters other than comma,
spaces, +, -, and digits.
3/ Handle all possible return values of snprintf().
1/ Do not read past the terminating null byte when hashing the name.
2/ S[x] is used as an index, but S is "char *S" (signed) and hence may
index the array out-of-bounds. Bit-mask S[x] with 127 (the array has 128
entries).
3/ Use a size_t for j, not an int (strlen() returns a size_t).
Notes:
- These are (mostly) theoretical problems, because the contents of
/proc/PID/status are (mostly) trusted.
- The "name" member of the status_table_struct has 8 bytes, and
"RssShmem" occupies exactly 8 bytes, which means that "name" is not
null-terminated. This is fine right now, because status2proc() uses
memcmp(), not strcmp(), but it is worth mentioning.
This function is unused (SIGNAL_STRING is defined by default, and if it
is not, procps does not compile -- for example, there is no "outbuf" in
help_pr_sig()) but fix it anyway. There are two bugs:
- it accepts non-hexadecimal characters (anything >= 0x30);
- "(c - (c>0x57) ? 0x57 : 0x30)" is always equal to 0x57.
There was a "buff[BUFFSIZE-1] = 0;" but there may be garbage between
what is read() (less than BUFFSIZE-1 bytes) and this null byte. Reuse
the construct from the preceding getrunners().
