It is documented behavior that when certain other keys
are active, sorts column highlighting will temporarily
be disabled. Among those keys is the 'L' (locate/find)
provision. The equals ('=') key can be used to restore
column highlighting by resetting other keys, except 1.
When a locate/find is active, the '=' key will have no
effect on 'x' column highlighting, which still remains
disabled. Further, when 'L' is active an 'x' keystroke
is processed changing the state of column highlighting
but without any visual clue (since it's yet disabled).
So this commit just extends the '=' key to embrace 'L'
processing resets, just like other highlight disabling
keys while avoiding 'x' state changes if approproiate.
Signed-off-by: Jim Warner <james.warner@comcast.net>
The cgroup field while shown as a vector is a concatenated
string, so alot of the complexity of sorting and displaying
has gone.
This change simplifies the cgroup sorting and adds display
and sorting for the name attribute of the cgroup, if found.
Signed-off-by: Craig Small <csmall@enc.com.au>
Ported-by: Jim Warner <james.warner@comcast.net>
From original:
commit 0ee090ae16
w would error out if the window size was smaller than 71 or some
other fields through environment grew too big. The code was a little
convoluted as well. The minimum length for command was 3, which is
pretty useless.
This change does the following:
w doesn't care by default the window size
w will adjust the command length up and down, to a minimum of 7
characters.
if the fields don't fit, w will line-wrap each line.
The idea being its better the line-wrap than it is to error out.
References: https://bugs.debian.org/183394
Signed-off-by: Craig Small <csmall@enc.com.au>
Ported-by: Jim Warner <james.warner@comcast.net>
From original:
commit 151c05b497
Previous commit fixed pkill for trailing garbage on pkill
signal when it was an integer. This check now ensures that
pkill complains about it.
References:
commit a3975a9c60
This commit prevents pkill from accepting something like `-1garbage` as
a SIGHUP. The previous code was using atoi() which does not check for
trailing garbage and would parse the above as 1.
Handling numeric signals in signal_option() is not really necessary,
since signal_name_to_number() will recognize numeric signals and parse
them properly using strtol() and checking for trailing garbage. It also
checks that the numeric signals are in the proper range. So all we need
to do is remove the buggy numeric signal handling here.
Tested with `pkill -1garbage sleep`, after this patch it will complain
that "1" is not a valid option, which is the expected.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Ported-by: Jim Warner <james.warner@comcast.net>
From original:
commit 9646f7cba4
Ever since top was adapted to the new <pids> interface
there has been a bug that would cause an abnormal exit
when the '-p' argument contained *no* valid pids. This
was never revealed until now since the QA folks tested
only with valid, existing pids. (bunch of morons, eh?)
And even though the program author is blameless he has
taken it upon himself to clean up after the QA jokers.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Gosh, just because nobody uses some newlib provision I
guess, since it is being offered, it ought to actually
be tested at some point. Well, that point just arrived
and guess what? A surprise: some bugs were discovered.
The procps_pids_select function established a for loop
wherein readproc is called until the passed 'maxthese'
limit. Unfortunately this was incorrect for 2 reasons:
1. For PROCPS_FILL_PID results are limited by what the
oldlib finds, having established the pid list at open.
Total found already cannot exceed a passed 'maxthese';
2. With PROCPS_FILL_UID, returned results could exceed
a 'maxthese' thus making the for loop incorrect again.
[ plus yours truly neglected to forward the required ]
[ UIDs total to our old library, another oops biggie ]
In summary: the loop should have been forever, exiting
only when all those identified procs had been located.
So, while addressing those bugs, I've consolidated all
the retrieval code (initialize, iterate, summarize) in
a single helper function which will now serve both the
procps_pids_reap and select functions. And as a result
those guys were reduced to quite trivial housekeeping.
This patch, hopefully, completes the normalization for
reap/select (fill), which began with references shown.
Reference(s):
commit 0c953eccc5
commit 747dfc5987
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the conversion to the new <pids> interface, a few
comments (only) are being adjusted, as detailed below.
. Escapes '\' crept into some comments containing '|'.
. For consistency, add '.' dot qualifier to a comment.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch contains the following minor modifications:
. When assigning to boot_seconds from a double, a cast
to 'unsigned long' was employed that in reality should
have been 'unsigned long long'. But, on second thought
it's probably best if the compiler makes the decision.
. Results for ID_TGID do not require an 'f_status' flg
since both tid and tgid will be available by virtue of
the 'simple_nextpid' function normal operations. Thus,
that flag has been removed from the <pids> Item_table.
. When the pids_stacks structure was eliminated with a
change to the alloc/dealloc functions in the reference
below, several casts became redundant and are removed.
Reference(s):
commit 747dfc5987.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit represents the ps transition to the <pids>
'stacks' interface. While an effort to minimize impact
on existing code was made (as with a disguised proc_t)
the changes were still extensive. Along the way, a few
modifications beyond simply conversion were also made.
------------------------------------------------------
Here's a brief overview the design of this conversion:
. The need to satisfy relative enum requirements could
not easily have been made table driven since any entry
in the format_array might require several <pids> items
in support. So I decided to allow every print function
to contribute its own relative enums once the decision
as to exactly what will be printed had been finalized.
. A similar approach was taken for sorting, since it's
possible to have sort keys that will not be displayed.
Here, I relied on the existing print extensions above.
. In summary, just prior to printing ps walks thru two
lists one time (the format_list & sort_list) and calls
each print function. That function does not print, but
sets its required enum if necessary. Later, when those
same functions are called repeatedly for every printed
line, the only overhead will be an if test and branch.
------------------------------------------------------
Below is a summary of major changes beyond conversion:
. Sorts are now the responsibility of the library. And
therefore the total # of sortable fields substantially
increased without effort. Additionally, several quirky
fields remain as sortable, even though they can't ever
be printed(?). Surely that must make sense to someone.
[ while on this subject of sort, please do *not* try ]
[ to sort old ps on 'args'. or better yet, if you do ]
[ try that sort, see if you can determine his order, ]
[ without peeking at the source. that one hurts yet! ]
. All logic dealing with the old openproc flags and ps
struct members known as 'need' have been whacked since
that entire area was solely the new library's concern.
. Remaining malloc/calloc calls to stdlib were changed
to xmalloc/xcalloc from our own include/xalloc.h file.
None of the replaced calls ever checked return values.
[ be aware that 2 minor potential memory leaks exist ]
[ depending on command line arguments. no attempt is ]
[ made to free dynamically acquired format/sort node ]
[ structures upon return; a conscious design choice. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
After simplifying that select/fill interface, there is
no longer a need for public 'alloc' & 'dealloc' stacks
functions. There is now only one instance of stacks as
an input parameter found in procps_pids_stacks_sort().
But sorting 'empty' stacks serves no possible purpose.
So this commit retains both functions, since they will
still be needed, but designates them private (static).
Additionally, with their demise we will eliminate that
pids_stacks structure from the header file, internally
using what always was the true 'stacks_extent' struct.
Signed-off-by: Jim Warner <james.warner@comcast.net>
After wrestling with the conversion of both top and ps
the differences between reap (all) & fill (select) has
become increasingly inconvenient. So this patch simply
normalizes that API making returned results identical.
The former procps_pids_stacks_fill identifier will now
be known as procps_pids_select which serves as logical
counterpart to the existing procps_pids_reap function.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Shoot, here's yet another bow to ps needs. But it's ok
because it makes a lot of sense. Rather than force all
users into their own calculations do but it once here.
As an aside this need arose during ps testing when the
sorts were using TIME_START or TICS_ALL. That was just
fine for almost every need except 'etime' plus 'time'.
That 'etime' was sorting the opposite of what's wanted
when using TIME_START (of course) while 'time' yielded
some weird ordering because TICS_ALL was too granular.
Signed-off-by: Jim Warner <james.warner@comcast.net>
While not documented in the man page, ps allows 'tty4'
as a valid output specifier complimenting 'tty8' & its
derivatives. So, in order to eliminate a dev_to_name()
call in the ps program the library will now offer this
abbreviated tty version (consisting of a number only).
Signed-off-by: Jim Warner <james.warner@comcast.net>
The 'PROCPS_PIDS_extra' enumerator already enjoys some
special place wherein it's zeroed with each iteration.
This patch simply extends the special handling to also
include support for sorting. It will be treated as the
'ull_int' data type, since that encompasses the entire
scope of that union within all pids_result structures.
[ plus, we've also corrected the actual 'extra' name ]
This change was prompted by the conversion of ps which
needs that enumerator to store the former 'pcpu' data,
so it will be available for sorting (not for display).
Signed-off-by: Jim Warner <james.warner@comcast.net>
The way that the passed sort order was validated would
allow the invalid 0 to fall between the sofa cushions.
So this patch will simply close that former oversight.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Two separate entries under the Fieldstab were employed
to manage 'relative' enumerators under that new <pids>
interface. However, just a single entry could actually
serve both needs with a negative 'not selected' value.
So this commit just borrows the approach used with the
ps conversion where -1 is now representing unselected.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just eliminates an error message no longer
needed under that newlib <pids> interface. Plus, a few
enumerators in the header weren't in alphabetic order.
Signed-off-by: Jim Warner <james.warner@comcast.net>
As part of the push to remove the old API, 3 more old calls were
deleted from the library. Now all someone needs to do is fix ps
and we're largely done.
skill is one of the older and more unloved programs. It was still
scanning readdir /proc. It now will use the procps library like the
rest of the programs.
Signed-off-by: Craig Small <csmall@enc.com.au>
The first part of fixing skill/snice to use the library instead
of directly readdir()ing /proc which is what it does now.
Remove the kill code from the skill/snice code and put common
elements into lib/signals.c Not 100% sure that is the right
destination instead of a new lib file, but ok for now.
kill shares some parsing logic with skill/snice but mainly
around signal specifications. The "do it" code is very different.
Signed-off-by: Craig Small <csmall@enc.com.au>
The values of PROCPS_SORT_ASCEND & PROCPS_SORT_DESCEND
were a tad unintuitive. This patch will just make them
a more natural +1 for ascending and -1 for descending.
[ plus it still allows that fast path multiplication ]
[ instead of a comparison for signed numbers/strings ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
With the advent of the 'fatal_proc_unmounted' function
in the <pids.h> API to ensure the /proc filesystem was
mounted, we will finally get rid of the last remaining
vestiges of the former libprocps <readproc> interface.
[ also play a little catch up and whack some headers ]
[ that are not necessary now, beyond that readproc.h ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
After peeking at possible conversion of the ps program
it appeared that we may ultimately need the concept of
a 'static' pids_stack in suport of look_up_our_self().
In other words, one not impacted by procps_pids_reset.
This patch simply sets the stage for that possibility.
Signed-off-by: Jim Warner <james.warner@comcast.net>
With this patch the distinction between a 'long' KLONG
and a 'long long' KLONG is being abandoned in favor of
a consistent declaration as 'long' only. Plus we would
have also defined it as 'unsigned' except there exists
much code already explicitly specifying the qualifier.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit was prompted by that change from 'addr' to
'ul_int' in the <pids> interface. Along the way, KLONG
was removed as having long ago outlived its usefulness
as performance optimizations for weird configurations.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Work on converting ps has revealed the desirability of
trading a void pointer for that ul_int type. There was
much arithmetic employed against such values and casts
would otherwise have been required. Even pmap needed a
cast on occasions when comparing an internal variable.
Besides, there is much to be said for reducing demands
on (and the complexity of) the result structure union.
[ we choose ul_int over ull_int since that former is ]
[ the exact same size and capacity as a void pointer ]
[ regardless of whether compiled as 32-bit or 64-bit ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Not sure how this one has gone unnoticed until now but
with valgrind's help it's going bye-bye lickety-split.
Reference(s):
==26533== Conditional jump or move depends on uninitialised value(s)
==26533== at 0x4E4082B: procps_meminfo_stack_fill (meminfo.c:408)
Signed-off-by: Jim Warner <james.warner@comcast.net>
[ but most definitely not all of them by a long shot ]
Reference(s):
proc/diskstat.c:186:17: warning: unused variable 'is_disk' [-Wunused-variable]
int retval, is_disk;
^
proc/namespace.c:110:1: warning: control may reach end of non-void function [-Wreturn-type]
}
^
proc/readproc.c:1131:50: warning: address of array 'ent->d_name' will always evaluate to 'true' [-Wpointer-bo
if(unlikely(unlikely(!ent) || unlikely(!ent->d_name))) return 0;
~~~~~~^~~~~~
proc/readproc.c:1158:50: warning: address of array 'ent->d_name' will always evaluate to 'true' [-Wpointer-bo
if(unlikely(unlikely(!ent) || unlikely(!ent->d_name))) return 0;
~~~~~~^~~~~~
proc/sysinfo.c:45:12: warning: unused variable 'stat_fd' [-Wunused-variable]
static int stat_fd = -1;
^
proc/sysinfo.c:49:12: warning: unused variable 'meminfo_fd' [-Wunused-variable]
static int meminfo_fd = -1;
^
proc/sysinfo.c:51:12: warning: unused variable 'vminfo_fd' [-Wunused-variable]
static int vminfo_fd = -1;
^
proc/sysinfo.c:53:12: warning: unused variable 'vm_min_free_fd' [-Wunused-variable]
static int vm_min_free_fd = -1;
^
proc/uptime.c:157:12: warning: unused variable 'realseconds' [-Wunused-variable]
time_t realseconds;
^
proc/uptime.c:158:16: warning: unused variable 'realtime' [-Wunused-variable]
struct tm *realtime;
^
vmstat.c:574:20: warning: format specifies type 'unsigned int' but the argument has type 'unsigned long' [-Wformat]
DSTAT(PROCPS_DISKSTAT_READ_TIME),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vmstat.c:578:20: warning: format specifies type 'unsigned int' but the argument has type 'unsigned long' [-Wformat]
DSTAT(PROCPS_DISKSTAT_WRITE_TIME),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
watch.c:230:7: warning: variable 'endptr' is uninitialized when used here [-Wuninitialized]
if (*endptr == '\0') set_ansi_attribute(0); /* [m treated as [0m */
^~~~~~
Signed-off-by: Jim Warner <james.warner@comcast.net>
Whoa, guess what field got overlooked in that march to
the newlib conversion? It was the TTY guy. However, it
wasn't completely top's fault - that newlib must share
at least some responsibility, for only offering a num.
[ and while we're at it, let's touch up the man page ]
[ to agree with ol' newlib's current implementation. ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
OK, ok, this was kind of a huge omission. So please do
not select the TTY field for display in top quite yet,
at least until a next patch has been pushed to GitLab.
And to produce a correct sort order for this new field
the GNU 'strverscmp' routine was a necessary addition.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Uptime output for both w and uptime command were showing no
comma or space after days.
$ ./uptime
18:32:21 up 22 days7 min, 6 users, load average: 0.23, 0.46, 0.64
Minor tweak to fix this.
This commit is an outgrowth of the research into a bug
involving the recently added enum 'PROCPS_PIDS_extra'.
Since this program is not equipped to filter more than
one user, the help text and man document were updated.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit is an outgrowth of the research into a bug
involving the recently added enum 'PROCPS_PIDS_extra'.
The WHAT portion of output is being padded with spaces
since the printf field width format specifier was used
in combination with a precision specifier. This commit
reduces the format string to just that precision part.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit is an outgrowth of the research into a bug
that recently surfaced with the 'w' program. And while
that program was just a victim several inconsistencies
were found in the handling of library flags during the
research. This patch just address such irregularities.
Reference(s):
http://www.freelists.org/post/procps/newlib-at-the-precipice,4
Signed-off-by: Jim Warner <james.warner@comcast.net>
I can't remember during what sleepy hour that enum was
added to pids.h, but it damn sure fell short of a full
implementation by approximately 1,000,000 miles or so.
Strangely it surfaced on Craig's system seemingly ggdb
related whereas on mine, a segmentation fault was only
seen when that -h (no header) argument was being used.
Oh well, the road to its resolution also offered us an
opportunity to cleanup some other items along the way.
Reference(s):
http://www.freelists.org/post/procps/newlib-at-the-precipice,4
Signed-off-by: Jim Warner <james.warner@comcast.net>
The former whattime logic used to suppress that 'days'
output when the system had been up less than 24 hours.
But since the refactor for newlib, '0 days' was always
output under those conditions. So this commit restores
the former expected behavior of suppressing that item.
[ plus an erroneous calculation of uphours was fixed ]
[ and the clang warnings shown below were also fixed ]
Reference(s):
proc/uptime.c:74:10: warning: unused variable 'buf' [-Wunused-variable]
char buf[256];
^
proc/uptime.c:131:58: warning: data argument not used by format string [-Wformat-extra-args]
pos += sprintf(upbuf + pos, "%d min, ", uphours, upminutes);
~~~~~~~~~~ ^
proc/uptime.c:175:15: warning: expression result unused [-Wunused-value]
comma +1;
~~~~~ ^~
Signed-off-by: Jim Warner <james.warner@comcast.net>
