Commit Graph

217 Commits

Author SHA1 Message Date
Jim Warner
e1cd74eec9 top: do not co-mingle strings/numbers under namespaces
Craig's recent commit under that newlib branch dealing
with namespace support has prompted me to review top's
handling of those fields. Currently, when such a field
is zero, top displays a dash ('-'). This will mean the
justification toggles ('j/J') will behave incorrectly.

This patch simply allows the potential zero to display
or be suppressed with the already existing '0' toggle.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-28 21:01:23 +11:00
Jim Warner
c7201d52eb top: miscellaneous accumulated tweaks to code/comments
A patch containing the following miscellaneous tweaks:

. remove a function that handled former library errors
[ that function should have gone bye-bye with 3.3.11 ]
[ when those 'wchan' provisions were much simplified ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-10-28 21:01:16 +11:00
Jim Warner
3da298c1d6 top: fix unlikely edge case wherein all fields are off
While testing a newlib interface for pids acquisitions
I encountered some unexpected results if an idiot user
(me) turns off all displayable fields. So, this commit
ensures that the PID field will be shown as a minimum.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-08-06 21:56:27 +10:00
Jim Warner
8226ca9838 top: avoid an unnecessary conversion for 'USED' column
When the USED column was introduced the proc_t.vm_swap
& proc_t.resident values were added together. However,
using 'resident' required an additional PROC_FILL flag
not to mention extra conversion of pages to kibibytes.

So now we'll use an already present vm_rss value which
removes any special handling for top's derived column.

And while we're at it we'll trade some more 'resident'
field uses with that more immediately usable 'vm_rss'.

Reference(s):
commit 709785e20b

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-08-06 21:56:02 +10:00
Jim Warner
9ba65bad8e top: miscellaneous accumulated tweaks to code/comments
Jeeze, to correct spelling on one single word (incure)
you had to go and align the entire comments paragraph?

[ well, at least there's one other minor code change ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-08-06 21:52:11 +10:00
Jim Warner
9cc6ed10c8 top: eliminate 'user' from the inspection view headers
Since it's possible that euser name is not being shown
or the horizontal position had been scrolled past that
USER column, then part of those headers will be blank.

So it doesn't make sense to try and show the USER that
is associated with a process at all. Thus, this commit
simply removes the 'user' provision from both headers.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-08-06 21:50:49 +10:00
Jim Warner
c07f6c5e6d top: improve vertical scroll management for 'i' toggle
When a user is taking advantage of the scroll features
it is likely a scrolled vertical position is well past
the first displayable task. That is especially true of
top's forest view ('V') mode where those early systemd
attached processes are generally not very interesting.

As such, should the idle mode toggle ('i') be employed
a distorted display is almost guaranteed because tasks
that have used some cpu, and thus should be displayed,
have already been skipped by virtue of their position.

So this patch temporarily nullifies vertical scrolling
during the period when idle tasks are not being shown.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-07-21 21:23:44 +10:00
Jim Warner
88fe45ef68 top: sacrifice a redundant procps_linux_version() call
With the commit referenced below, the linux version is
no longer available via an external variable. So we'll
eliminate the extra superficial function call employed
at program end as part of a debugging (only) o/p spew.

[ the user will soon be returned to the command line ]
[ & he/she can run their own 'uname -r' if in doubt! ]

Reference(s):
commit 56d9d5e7e7

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-21 08:05:59 +10:00
Craig Small
56d9d5e7e7 library: Change linux version
Added function procps_linux_version() which used to be an
exported integer instead.  Also changed the method of obtaining
the linux version (more correctly the os release) to use a specific
procfs entry. This works for both Linux and FreeBSD.
2015-06-19 21:00:46 +10:00
Jim Warner
93666da62c top: adapt to a simplified library interface for wchan
This patch was made necessary by those library changes
in support of recently revised/simplified wchan logic.

Reference(s):
http://www.freelists.org/post/procps/WCHAN,11

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-19 19:09:20 +10:00
Craig Small
505f257a8c library: remove procps_version functions
It doesn't make any sense to have the binary version strings
embedded into the library. The version strings are defined
already either in the Makefile or in include/c.h
2015-06-18 22:37:24 +10:00
Jim Warner
2ba7aa8b7d top: add support exploiting new library LXC containers
Reference(s):
https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1424253
https://bugs.launchpad.net/ubuntu/+source/procps/+bug/1424253

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-06-14 15:36:06 +10:00
Jim Warner
e107f5d63b top: miscellaneous accumulated changes to program code
This commit just tweaks top in the following respects:

. for alphabetic integrity, change 'INSP_hdr...' names

. eliminate the -Wsometimes-uninitialized warning that
was found under OSX Yosemite (llvm 6.0/clang-600.0.56)

. update program 'comments' reflecting copyright dates

Signed-off-by: Jim Warner <james.warner@comcast.net>
2015-04-07 20:46:15 +10:00
Jim Warner
da06b8fa59 top: tweak forest view protections for forking anomaly
A recent commit eliminated the potential for a storage
violation with forest view mode. It occurred when some
program (erroneously?) created a lengthy forking loop.
However, the associated commit message was misleading.

The message implied that an unexpected order following
a sort on start_time was the cause of storage overruns
and a 'char' used to track nesting level only distorts
the display when it goes negative. Actually, the truth
is really just the opposite. Any start_time sort quirk
causes no harm while that 'char' can yield corruption.

Should some child end up sorted ahead of its parent by
way of an extremely unlikely shared start_time the end
result is such a child will be displayed unnested just
like init or kthreadd along with all its own children.

However, if nesting levels exceeded 255 (and became 0)
a massive array overrun could be triggered when such a
task and *all* its children were added to an array for
the second time. Exactly how much storage was violated
depended on the number of children that zeroed process
had spawned (hinted at via either SIGSEGV or SIGABRT).

The earlier commit limited nested levels to 100 so the
root cause of the storage violation was already fixed.
The potential for distorted nesting levels due to sort
on start_time would seem to remain. But it's extremely
unlikely that 2 tasks would share the same start_time.

Even so, a new #define has been introduced which makes
top impervious to the order of tasks such that a qsort
is no longer necessary (providing an init/systemd task
exists & was harvested as the first task by readproc).
It can be utilized if distorted nesting ever becomes a
real issue. But since there is a 5-10% performance hit
with that, we'll continue using start_time as default.

References(s):
commit ce70017eb1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-10-29 17:00:03 +01:00
Jim Warner
ce70017eb1 top: provide some protection against forking anomalies
This commit will eliminate a very nasty bug associated
with top's forest view mode.  It addresses a potential
SIGSEGV/SIGABRT that was only encountered when another
program (erroneously?) creates a lengthy forking loop.

If the growing list of nested children is sufficiently
fast such that proc_t start_time is duplicated between
children then the sort upon which top relies might not
produce the expected order. That, in turn, could cause
the forest_adds function to initially miss some child.

But that missed child would be caught by forest_create
and eventually would cause our array boundary overrun.
Such overrun occurs when some child of that originally
*missed* child is found and a duplicate add attempted.

In correcting this bug we'll also use this opportunity
to prohibit a borrowed proc_t padding byte (char) from
going negative. If the nesting level exceeded 127, the
effect was an "unnesting" with the snprintf width then
viewed as flag+width also yielding left justification.

Henceforth, we'll limit nesting to 100 with subsequent
children shown as " +  ", not the usual " `- " prefix.

References(s):
https://bugzilla.redhat.com/show_bug.cgi?id=1153642
http://www.freelists.org/post/procps/Bug-in-the-forrest-view,6

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-10-27 17:18:47 +01:00
Jim Warner
b0767bd391 top: ensure previously saved rcfile honored completely
When startup defaults were changed users with existing
rcfiles would likely find their previous configuration
was not being honored in all respects. The disparities
involved Graphs modes and Summary/Task memory scaling.

This patch simply restores what was always intended as
the proper behavior for previously saved config files.

References(s):
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762928
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762947
. new startup defaults
commit 8ef6cd91fc

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-09-29 08:22:13 +10:00
Jim Warner
8adf4acc03 top: final tweak to recent changes for new graph modes
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-08-11 16:39:51 +02:00
Jim Warner
e92b692932 top: swat a potential buglet affecting new graph modes
This patch will cure a potential aberration associated
with a terminal's size (SIGWINCH) and top's new graphs
modes. The symptoms were a dangling tilde (~) plus the
potential loss of a graph's right-most visual content.

The condition was only apparent when a %Cpu approached
100% usage. Also the apparent loss of content affected
the 'block' graph only. With 'bar' graphs, that affect
became the loss of proper right-most bar graph colors.

The cause was determined to be a combination of: 1) an
unnecessary snprintf precision specification; and 2) a
rounding quirk for any graphs which displayed distinct
types of information (as for user/syst, used/unavail).
These could then combine to produce an extra bar/block
which, in turn, resulted in the truncation of a pseudo
termcap attribute used by the show_special() function.

What was originally interpreted as an intractable race
condition turns out to be just a self inflicted wound.

Reference(s):
http://www.freelists.org/post/procps/top-Possible-bug-in-the-graphs,1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-08-08 22:14:21 +02:00
Fredrik Fornwall
dfe1f7d104 top: replace <values.h> with <limits.h> plus <float.h>
This fixes a compilation problem on Android which lacks values.h.

Reference(s):
https://gitorious.org/procps/procps/merge_requests/26

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-08-08 22:14:21 +02:00
Jim Warner
5380ef9022 top: adapt global memory support to new library format
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-31 15:10:42 +02:00
Jaromir Capik
cbba7ad7a7 top: exclude reclaimable slabs from used 2014-07-22 14:07:45 +02:00
Jim Warner
d310a18fc2 top: exploit new kb_main_available, make Jaromir happy
This patch will trade a former pessimistic calculation
of free physical memory for a more optimistic one that
uses the newly added kb_main_available library export.

But in case one might wish to return to the old former
method, there's a new #define that was made available.

[ the new calculation will affect graphing mode only ]

Reference(s):
http://www.freelists.org/post/procps/systemd-support-to-library,9

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-18 20:49:57 +02:00
Jim Warner
9500dc198c top: trade Page_size for that newly exposed page_bytes
Might as well use the newly exposed sysinfo.h variable
'page_bytes' rather than our own. Plus, in the process
we can avoid incurring yet one more function call hit.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-18 20:49:57 +02:00
Jim Warner
6cd8691720 top: fix potential 'nan', should a system have no Swap
Gosh, just because most of us might run with some swap
file allocated, not every system might. I only wish my
testing methodology was as sophisticated as Jaromir's.

Reference(s):
http://www.freelists.org/post/procps/latest-top-enhancements,7

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-07 18:43:52 +02:00
Jim Warner
c75586f523 top: eliminated unreferenced macros & an error message
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-07 18:43:52 +02:00
Jim Warner
2199af404a top: maximize recent locale aware numeric enhancements
When startup argument parsing was recently enhanced to
account for LC_NUMERIC settings, some user input logic
dealing with numbers fails to exploit that capability.

This patch extends such enhancements to a running top.

Reference(s):
commit f7b84f45c7
http://www.freelists.org/post/procps/topwatch-floating-point-input,2

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-07-01 21:30:45 +10:00
Jim Warner
96c330e3b3 top: afford each window its own cpu/memory graph modes
When those new cpu/memory graphs modes were introduced
they had global impact. In other words, the modes that
were chosen for a 'current' window affect Summary Area
appearance for every other window as well, even though
each window sets unique View_STATES/View_MEMORY flags.

I do not know how widespread the use of top's separate
window provisions is, but I do know that documentation
promises every window (field group) provides "a unique
separately configurable summary area". And even though
that promise does not include memory scaling (separate
'E' command) the graph modes are integral to 't' & 'm'
and those were already observed on a per window basis.

So this patch just takes the cpu and memory graph mode
values out of global scope in the configuration file &
gives each window its own unique pair of graph values.

Reference(s):
commit 1d171ec741

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-28 23:46:40 +10:00
Jim Warner
f7b84f45c7 top: tweak argument parsing for some locale situations
Boy I hate locale stuff. For code I thought was pretty
robust, Jaromir sure proved that it wasn't. Anyway, me
thinks this commit closes some gaps and will cause top
to behave appropriately under various locale settings.

It does *not* permit top to respond to the ',' and '.'
floating point separator without regard to the locale.
It does, however, enforce proper LC_NUMERIC responses.

Let's look on this commit as an interim solution until
Jaromir can create that proposed 'fp_decode' function.
Who knows, he might even borrow some of our mkfloat().

[ An aside: the coreutils sleep and timeout programs ]
[ claim to permit floating point arguments. However, ]
[ neither one will accept the comma separator should ]
[ the locale be a country that in fact uses a comma. ]

[ In other words, with this commit we are way ahead! ]

Reference(s):
http://www.freelists.org/post/procps/topwatch-floating-point-input
http://www.freelists.org/post/procps/topwatch-floating-point-input,1

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-25 13:58:31 +02:00
Jim Warner
cec1976511 top: let's not pretend top can catch SIGKILL & SIGSTOP
While there was no harm done setting a handler for the
above two signals, they are in fact uncatchable. Thus,
whenever we ran with valgrind we're politely reminded.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-25 13:58:30 +02:00
Jim Warner
db6381ae04 top: scale length for new graphs to a terminal's width
When the beginning of the Mem/Swap graphs was variable
scaling them to the current terminal's width was a bit
of a costly nightmare. So the graph size was fixed and
subject to truncation. However now that the start of a
graph can be easily predicted, I've revisited scaling.

As it turns out, any cost is minimal & mostly incurred
at an opportune time, at SIGWINCH or user interaction.
Plus, most of the apparent arithmetic is actually just
a means of documenting and will disappear thru compile
time constants in the ultimate generated machine code.

Note: those graphs will now behave just like any other
Summary Area element - they will scale from full sized
down to a terminal width of 80 columns, at which point
those displayed graphs are then subject to truncation.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-24 20:38:30 +10:00
Jim Warner
41ab7f005e top: with new bar graphs, make 'b' toggle unrestricted
While the 'b' toggle remains window based (vs. global)
it should no longer require that the window be visible
and either the 'x' or 'y' toggles to be on. Previously
those requirements were intended to remind a user that
there must be something for this command to highlight.

With the introduction of graph modes (specifically the
the bar graph) the 'bold/reverse' toggle has important
implications beyond highlighting some columns or rows.

The %Cpu(s) graph and Mem portion of the memory graphs
are designed to offer a visual clue as to the separate
elements comprising them. But that separation could be
lost under some X color schemes or when top is running
without color (in monochrome mode) and the block graph
is selected. But, if the graph is then changed to bars
any separation always becomes visible whenever the 'b'
toggle is turned off. Portions then show in 'reverse'.

So from now on we'll check nothing, we'll just toggle.

[ Besides, with all the code thrown at restricting a ]
[ 'b' toggle use, it might have all been for naught. ]
[ That toggle could still be set/unset using the 'Z' ]
[ command and the color mapping screen. Geez Louise! ]

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-24 20:38:30 +10:00
Jim Warner
b8614adcb5 top: make '#define GRAPHS_ALIGN' an immutable solution
My original graph modes implementation made no attempt
to align the Cpu & Mem/Swap graphs. I thought, rather,
that such alignment could be best achieved by the user
using top's 'E' memory scaling command toggle. In that
way Mem/Swap prefixes could be reduced by 3 positions,
bringing the beginning '[' into line with the %Cpu(s).

If that proved to be too cumbersome a #define could be
enabled making the Mem/Swap prefix static while adding
a few padding bytes to the %Cpu line(s) for alignment.
It was those waisted bytes that were the most concern.

What I had not counted on was the fact that the memory
lines themselves might become misaligned & that became
likely with more physical memory present. That too can
be cured with the 'E' command but as scaling is raised
we soon reach a meaningless total such as '0.003' even
though the displayed % remains valid (and unchanging).

So this commit implements unconditionally what used to
be conditional. But, instead of waisting padding bytes
we'll put that space to good use with a new 'total %'.

Reference(s):
http://www.freelists.org/post/procps/latest-top-enhancements,1
commit 1d171ec741

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-24 20:35:20 +10:00
Jim Warner
f33d49c6cf top: shorten some lines by changing a few declarations
My first blush graphs modes implementation went just a
tad overboard on identifier lengths. As a result, some
program lines were getting quite long. So, this commit
will simply shorten some excessively long identifiers.

Reference(s):
http://www.freelists.org/post/procps/latest-top-enhancements
commit 1d171ec741

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-24 20:35:20 +10:00
Jim Warner
1d171ec741 top: add graphs modes for cpu and memory, program code
This patch makes 't' (View_STATES) & 'm' (View_MEMORY)
commands into 4-way toggles. The two new modes provide
for two different graphs of the cpu and/or memory use.

These new capabilities are similar to those offered by
the 'htop' program. However they're aesthetically more
pleasing (to me) plus the scalings are more authentic.

Poor ol' top has long been troubled by the comparisons
offered up by the 'htop' program. Many of those things
were only true of the original redhat top while others
are no longer true of this current top program. So let
me use this commit msg to begin to correct the record.

Corrected comparisons between 'htop' & 'top' programs:
------------------------------------------------------
+ htop does not start faster, actually reverse is true
+ top offers scrolling vertically and horizontally too
. (and top offers better <Home> and <End> key support)
+ unassigned keystrokes don't subject top to any delay
. (but htop suffers that annoying ncurses <Esc> delay)
+ in top one need not type the PID to kill the process
+ in top one need not type the PID to renice a process

Some things the 'htop' program was not bragging about:
------------------------------------------------------
+ top can outperform the htop program by a wide margin
+ htop + SIGWINCH = corrupted display + restart likely
+ htop cannot preserve its screen data at suspend/exit
+ the htop column management scheme is very cumbersome
+ htop allows columns to be duplicated again and again
+ htop displays only full command lines, not pgm names
. (and that 'Command' column must always be displayed)
. (and it must always remain as the last column shown)
+ htop does not provide for any sort of command recall
+ htop's search feature does not highlight any matches
+ there is no 'find next' outside of htop search modes
+ htop does not allow Header or Process memory scaling
+ htop provides no flexibility on column justification
+ htop does not provide the means to change col widths
+ htop provides less control over colors configuration
+ htop always overwrites the rcfile with any UI change

Someday, maybe we'll provide a better comparison as an
addendum for (or replacement of) that README.top file.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-22 21:39:55 +10:00
Jim Warner
318919094d top: rearrange Mem & Swap lines and standardize 'used'
In anticipation of upcoming memory graphing provisions
the abbreviations 'Mem' and 'Swap' are being made into
individual translatable strings in order to be reused.

Additionally, the Mem 'used' amount will now no longer
included the 'buffers' and 'cached' values. Thus, each
Mem category becomes unique. This is the approach used
by tools such as 'htop' or the gnome 'System Monitor'.

Lastly, with that change to the 'used' category it has
been repositioned after 'free' on the Mem & Swap lines
making a comparison between 'total' and 'free' easier.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-06-22 21:39:55 +10:00
Jim Warner
23ebb9f44d top: tweak hotplugged response and frame refresh logic
For some time now, top has refrained from updating the
current number of cpus and memory totals with each and
every refresh cycle. Rather, to lessen overhead costs,
such values are updated periodically (5 min & 3 secs).

The delay in updating the cpu count was only important
with the addition of a cpu, since any loss is detected
immediately. And the large interval was chosen because
of the costs once associated with a glibc sysconf call
and an unlikely scenario of physically adding the cpu.

But the ease with which cpus can be taken offline then
placed back online under linux suggests that 5 minutes
may be too high. So, without addressing the likelihood
of that act, top is now more responsive in these ways:

1) that 5 minute interval has been reduced to 1 minute
2) any key, not just Enter/Space, refreshes cpus & mem

Note: we leave the man document as is, suggesting that
only the Enter/Space keys force an update for hotplug.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-05-28 06:53:19 +10:00
Jim Warner
0caa6d6e67 top: miscellaneous accumulated changes to program code
. prevent any input recall overrun if window downsized
. adjust translation notes for true column hdr maximum

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-05-13 16:39:49 +02:00
Jim Warner
bef6b0f025 top: standardize <Esc> key support with prompted input
In release 3.3.6, some commands were equipped with the
concept of a 'default pid'. The initial implementation
meant that the intuitive <Esc> key would not always be
treated as one would expect under any well behaved UI.

This patch ensures the expected <Esc> key behavior of:
terminating user input while still making possible the
necessary distinction between 'no input' & 'defaults'.

Reference(s):
http://www.freelists.org/post/procps/top-Escape-doesnt-abort-kill-command

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 20:56:48 +02:00
Jim Warner
fe37ad15cd top: avoid a 'nan' when the delay interval is very low
The granularity of /proc/uptime is fixed at hundredths
of a second. And, since we can cycle faster than that,
we are exposed to 'nan' when calculating elapsed time.

This commit will protect us from that outcome when the
delay interval has been set to an extremely low value.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 20:56:48 +02:00
Jim Warner
e2868da34e top: update copyright dates plus 1 preprocessor change
Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 13:46:06 +02:00
Jim Warner
22e6582974 top: protect against distortion when system time reset
If a system's time is adjusted backwards, then elapsed
time could appear as negative. This yielded a negative
%CPU value. Alternately if zeros were suppressed ('0')
the result was a blank %CPU column. In both cases that
distortion would last for one display cycle or until a
user forced a display refresh via some keyboard input.

The original recommendation was trading gettimeofday()
for clock_gettime() using CLOCK_MONOTONIC. But on some
systems that might not be possible, forcing the use of
CLOCK_REALTIME instead. Not only would that complicate
the build system, but it may leave us with minus %CPU.

Another approach was to ensure that elapsed time could
never be negative. Of course, this produced distortion
of %CPU values but it would be proportionally correct.
This wasn't dissimilar to a distortion already present
should the time be adjusted forward or backward within
any 'remaining' top delay intervals. These aberrations
would be avoided with clock_gettime & CLOCK_MONOTONIC,
but that is a less than ideal solution as noted above.

This final solution, which originated down under, will
simply rely on the /proc/uptime seconds, which will be
immune to *any* tampering with the system clock. Thus,
we now have a fix for the distortion we didn't know we
suffered plus a negative %CPU that began this odyssey.

Thanks to:
sk.alvin.x@gmail.com, for the original effort
jcapik@redhat.com, for a heads up on CLOCK_MONOTONIC
csmall-procps@enc.com.au, for the best suggestion of all

Reference(s):
. original post/patch
http://www.freelists.org/post/procps/PATCH-top-use-clock-gettime-instead-of-gettimeofday
. heads up on CLOCK_MONOTONIC
http://www.freelists.org/post/procps/PATCH-top-use-clock-gettime-instead-of-gettimeofday,2
. the final solution
http://www.freelists.org/post/procps/PATCH-top-use-clock-gettime-instead-of-gettimeofday,11

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-04-28 13:46:06 +02:00
Yuri Chornoivan
2ec9f5c22e Minor i18n fixes
Minor fixes that the translator (Yuri) has found in some of the
strings. You only know how many typos and thinkos you have when
someone is trying to translate it.

Signed-off-by: Craig Small <csmall@enc.com.au>
2014-03-03 21:58:56 +11:00
Jim Warner
24f1fbd9d0 top: avoid name conflict in the next version of stdlib
Since its inception top has always used enumerators to
identify displayable fields. They've taken the form of
P_PID, etc. As it turns out, something has changed for
libc6-dev versions beyond 2.17-93 wherein 'P_PID' will
now be exposed via stdlib.h. I have not pinpointed the
exact cause but it may depend on header include order.

This patch just trades top's long standing 'P_' prefix
convention for that of 'EU_' (short for enumerator). I
cannot find *any* header under /usr/include/ currently
utilizing this particular three character combination.

And as a further safeguard top will henceforth include
'system' specific headers after the standard includes.

Reference(s):
http://www.freelists.org/post/procps/top-wont-compile-anymore

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-02-27 06:30:44 +11:00
Jim Warner
bcf4f5a830 top: restore the former behavior after stderr redirect
When top originally responded to the potential libnuma
stderr write, the library was consistently called with
each refresh cycle. That, in turn, guaranteed that any
warning message would be seen at program end by virtue
of: 1) having been issued before the 2nd refresh cycle
and; 2) benefiting from inherited /dev/null buffering.

A later efficiency refactor meant the numa library may
not always be called with every refresh cycle. Rather,
it was only called if top was in one of two numa views
(the '2' or '3' toggles). That, in turn, resulted in a
loss of any warning message at program end unless numa
mode had been preserved in the rcfile. In other words,
if top was started normally then a single cycle stderr
redirect would have long passed by the time the '2' or
'3' toggle was activated. The warning message actually
was spewed but quickly lost to the full screen refresh
which follows all keyboard interactions with the user.

This commit simply moves the restoration of our stderr
redirect to program end (instead of that first display
refresh). Now, any libnuma stderr warning message will
appear as the concluding output line upon quitting top
without regard to when any numa mode view was invoked.

And since this technique might be useful in some other
context (as an example of how to 'buffer' stderr) it's
been generalized with its own #define. But to maximize
its usefulness, the original redirect should be issued
much earlier in pgm startup than top has chosen to do.

Reference(s):
. original libnuma stderr response (msg seen)
commit 35dc6dcc49
. numa refractoring for efficiency (msg lost)
commit f12c0d5c6e

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-02-22 11:16:22 +11:00
Jim Warner
b6fcb602ce top: provide for discontinuous (not active) NUMA nodes
Apparently there are occasions when NUMA nodes may not
always be contiguous. Under such conditions nodes that
were not used would still occupy precious Summary Area
space showing 100% idle, under the '2' command toggle.

With this commit top will no longer display numa nodes
that have no associated cpu when the '2' toggle is on.
But just in case we wish to return to former behavior,
a new #define called OFF_NUMASKIP has been introduced.

And as an aside, a recent refactor mentioned below set
the stage for this patch to be 'self-tuning'. In other
words, if an inactive/non-displayed node should become
active (if even possible), then top will begin showing
such a node automatically with the next screen update.

Unfortunately, all inactive nodes now 'suppressed' are
still accessible via the '3' command. Those nodes will
just be displayed as empty (no associated cpus shown).
This is not really a top problem but more of a libnuma
and/or user deficiency. The library lacks the means to
validate a node id and the user then input a node that
was not even shown under a '2' toggle Summary display.

( too bad libnuma does not offer an 'is_node_active' )
( type function so top could warn a user when such a )
( discontinuous node was requested using his '3' cmd )

( sure, top could achieve this objective himself but )
( that would require making yet another array global )
( which i'm just not in the mood to do - besides, we )
( have already made enough concessions to libnuma.so )

Lastly, an existing #define (PRETEND_NUMA) was changed
to 'disable' node #1 so as to simulate a discontinuous
node. This allows testing of the '2' and '3' commands.

Reference(s):
http://www.spinics.net/lists/util-linux-ng/msg08671.html
. set stage for self tuning
commit f12c0d5c6e

Signed-off-by: Jim Warner <james.warner@comcast.net>
2014-01-20 19:10:22 +01:00
Jim Warner
14ef47af57 top: do not forget the fscanf %s terminating null byte
Reference(s):
http://www.freelists.org/post/procps/procpsng-339-defects-found

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-12-19 15:27:11 +01:00
Jim Warner
4c464acf28 top: follow usual name conventions for global variable
A recent change involving a one cycle stderr redirect,
to handle a libnuma potential transgression, failed to
follow normal global variable naming conventions. This
patch will capitalize the 1st letter of 'Stderr_save'.

Reference(s):
commit 35dc6dcc49

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-12-02 21:37:36 +01:00
Jim Warner
57ab5eed15 top: do not lie about purported alphabetical orderings
Excluding those special X_XON/X_XOF enums, which might
not even be present, restore strict collating order of
all the case labels in the task_show switch statement.

Also, adjust a few sort callbacks for the same reason.

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-12-02 21:37:36 +01:00
Jim Warner
af4e6533ba top: increase the maximum number of displayable fields
The recent addition of namespaces, combined with those
potential suse out-of-memory fields, means that we are
close to the maximum number of fields poor ol' top can
display. Imagine, the really old top was limited to 26
fields (28 with the suse hack) and this top had neared
the version 'g' rcfile limits which were a healthy 55.

This patch adds another 15 fields to the maximum while
making it even easier to increase in the future. Also,
top still silently accommodates older config files all
the way back to the original pre-ng version top-3.2.8!

Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00
Jim Warner
2aa0951d1b top: expand this program to include namespaces support
Signed-off-by: Jim Warner <james.warner@comcast.net>
2013-11-25 20:57:32 +11:00