procps/man-po/sv.po
Craig Small 73f1f65761 nls: Fix translation problems
Some of the translation files did not escape the < properly leading
to po4a aborting.  Also some translators are using old templates
and this merges them to the new ones.

References:
 procps-ng/procps#188
2021-01-30 10:38:30 +11:00

12813 lines
358 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Swedish translation of procps-ng-man.
# Copyright © 2017, 2018, 2021 Free Software Foundation, Inc.
# This file is distributed under the same license as the procps-ng package.
#
# Göran Uddeborg <goeran@uddeborg.se>, 2017, 2018, 2019, 2020, 2021.
#
# $Id: procps-ng-man.po,v 1.12 2021-01-24 21:47:55+01 göran Exp göran $
msgid ""
msgstr ""
"Project-Id-Version: procps-ng-man 3.3.17rc1\n"
"Report-Msgid-Bugs-To: Procps list <procps@freelists.org>\n"
"POT-Creation-Date: 2021-01-21 21:19+1100\n"
"PO-Revision-Date: 2021-01-28 22:55+0100\n"
"Last-Translator: Göran Uddeborg <goeran@uddeborg.se>\n"
"Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
"Language: sv\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
"X-Bugs: Report translation errors to the Language-Team address.\n"
#. type: TH
#: ../free.1:5
#, no-wrap
msgid "FREE"
msgstr "FREE"
#. type: TH
#: ../free.1:5 ../skill.1:9
#, no-wrap
msgid "2018-05-31"
msgstr "2018-05-31"
#. type: TH
#: ../free.1:5 ../kill.1:9 ../pgrep.1:10 ../pmap.1:8 ../pwdx.1:6 ../skill.1:9
#: ../slabtop.1:5 ../sysctl.8:9 ../sysctl.conf.5:9 ../tload.1:4 ../uptime.1:3
#: ../vmstat.8:3 ../w.1:3 ../watch.1:1 ../ps/ps.1:7 ../top/top.1:65
#, no-wrap
msgid "procps-ng"
msgstr "procps-ng"
#. type: TH
#: ../free.1:5 ../kill.1:9 ../pgrep.1:10 ../pidof.1:18 ../pmap.1:8 ../pwdx.1:6
#: ../skill.1:9 ../slabtop.1:5 ../tload.1:4 ../uptime.1:3 ../w.1:3
#: ../watch.1:1 ../ps/ps.1:7 ../top/top.1:65
#, no-wrap
msgid "User Commands"
msgstr "Användarkommandon"
#. ----------------------------------------------------------------------
#. type: SH
#: ../free.1:6 ../kill.1:10 ../pgrep.1:11 ../pidof.1:19 ../pmap.1:9
#: ../pwdx.1:7 ../skill.1:10 ../slabtop.1:6 ../sysctl.8:10 ../sysctl.conf.5:10
#: ../tload.1:5 ../uptime.1:4 ../vmstat.8:4 ../w.1:4 ../watch.1:2
#: ../ps/ps.1:27 ../top/top.1:70
#, no-wrap
msgid "NAME"
msgstr "NAMN"
#. type: Plain text
#: ../free.1:8
msgid "free - Display amount of free and used memory in the system"
msgstr "free — Visa mängden fritt och använt minne i systemet"
#. ----------------------------------------------------------------------
#. type: SH
#: ../free.1:8 ../kill.1:12 ../pgrep.1:13 ../pidof.1:21 ../pmap.1:11
#: ../pwdx.1:9 ../skill.1:12 ../slabtop.1:8 ../sysctl.8:12 ../tload.1:7
#: ../uptime.1:6 ../vmstat.8:6 ../w.1:6 ../watch.1:4 ../ps/ps.1:29
#: ../top/top.1:75
#, no-wrap
msgid "SYNOPSIS"
msgstr "SYNOPSIS"
#. type: Plain text
#: ../free.1:11
msgid "B<free> [I<options>]"
msgstr "B<free> [I<flaggor>]"
#. ----------------------------------------------------------------------
#. type: SH
#: ../free.1:11 ../kill.1:15 ../pgrep.1:22 ../pidof.1:34 ../pmap.1:14
#: ../skill.1:22 ../slabtop.1:11 ../sysctl.8:18 ../sysctl.conf.5:12
#: ../tload.1:10 ../uptime.1:9 ../vmstat.8:10 ../w.1:9 ../watch.1:7
#: ../ps/ps.1:31 ../ps/ps.1:1003 ../top/top.1:82
#, no-wrap
msgid "DESCRIPTION"
msgstr "BESKRIVNING"
#. type: Plain text
#: ../free.1:17
msgid "B<free> displays the total amount of free and used physical and swap memory in the system, as well as the buffers and caches used by the kernel. The information is gathered by parsing /proc/meminfo. The displayed columns are:"
msgstr "B<free> visar den totala mängden fritt och använt fysiskt minne och växlingsminne i systemet, liksom buffertarna och cacharna som används av kärnan. Informationen samlas in genom att tolka /proc/meminfo. De visade kolumnerna är:"
#. type: TP
#: ../free.1:17
#, no-wrap
msgid "B<total>"
msgstr "B<totalt>"
#. type: Plain text
#: ../free.1:20
msgid "Total installed memory (MemTotal and SwapTotal in /proc/meminfo)"
msgstr "Totalt installerat minne (MemTotal och SwapTotal i /proc/meminfo)"
#. type: TP
#: ../free.1:20
#, no-wrap
msgid "B<used>"
msgstr "B<använt>"
#. type: Plain text
#: ../free.1:23
msgid "Used memory (calculated as B<total> - B<free> - B<buffers> - B<cache>)"
msgstr "Använt minne (beräknat som B<totalt> - B<fritt> - B<buffertar> - B<cache>)"
#. type: TP
#: ../free.1:23
#, no-wrap
msgid "B<free>"
msgstr "B<fritt>"
#. type: Plain text
#: ../free.1:26
msgid "Unused memory (MemFree and SwapFree in /proc/meminfo)"
msgstr "Oanvänt minne (MemFree och SwapFree i /proc/meminfo)"
#. type: TP
#: ../free.1:26
#, no-wrap
msgid "B<shared>"
msgstr "B<delat>"
#. type: Plain text
#: ../free.1:29
msgid "Memory used (mostly) by tmpfs (Shmem in /proc/meminfo)"
msgstr "Minne använt (huvudsakligen) av tmpfs (Shmem i /proc/meminfo)"
#. type: TP
#: ../free.1:29
#, no-wrap
msgid "B<buffers>"
msgstr "B<buffertar>"
#. type: Plain text
#: ../free.1:32
msgid "Memory used by kernel buffers (Buffers in /proc/meminfo)"
msgstr "Minne använt av kärnans buffertar (Buffers i /proc/meminfo)"
#. type: TP
#: ../free.1:32
#, no-wrap
msgid "B<cache>"
msgstr "B<cache>"
#. type: Plain text
#: ../free.1:35
msgid "Memory used by the page cache and slabs (Cached and SReclaimable in /proc/meminfo)"
msgstr "Minne använt av sidcachen och skivor (Cached och SReclaimable i /proc/meminfo)"
#. type: TP
#: ../free.1:35
#, no-wrap
msgid "B<buff/cache>"
msgstr "B<buff/cache>"
#. type: Plain text
#: ../free.1:38
msgid "Sum of B<buffers> and B<cache>"
msgstr "Summan av B<buffertar> och B<cache>"
#. type: TP
#: ../free.1:38
#, no-wrap
msgid "B<available>"
msgstr "B<tillgängligt>"
#. type: Plain text
#: ../free.1:47
msgid "Estimation of how much memory is available for starting new applications, without swapping. Unlike the data provided by the B<cache> or B<free> fields, this field takes into account page cache and also that not all reclaimable memory slabs will be reclaimed due to items being in use (MemAvailable in /proc/meminfo, available on kernels 3.14, emulated on kernels 2.6.27+, otherwise the same as B<free>)"
msgstr "Uppskattning av hur mycket minne som är tillgängligt för att starta nya program, utan att börja växla. Till skillnad mot data som tillhandahålls av fälten B<cache> eller B<fritt> tar detta fält hänsyn till sidcachen och även att inte alla återvinningsbara minnesskivor kommer återvinnas på grund av saker som används (MemAvailable i /proc/meminfo, tillgängligt i kärnan 3.14, emulerat i kärnor 2.6.27+, annars samma som B<fritt>)"
#. type: SH
#: ../free.1:47 ../kill.1:31 ../pgrep.1:50 ../pidof.1:38 ../pmap.1:18
#: ../pwdx.1:12 ../skill.1:35 ../slabtop.1:16 ../tload.1:17 ../uptime.1:26
#: ../vmstat.8:19 ../watch.1:14
#, no-wrap
msgid "OPTIONS"
msgstr "FLAGGOR"
#. type: TP
#: ../free.1:48
#, no-wrap
msgid "B<-b>, B<--bytes>"
msgstr "B<-b>, B<--bytes>"
#. type: Plain text
#: ../free.1:51
msgid "Display the amount of memory in bytes."
msgstr "Visa mängden minne i byte."
#. type: TP
#: ../free.1:51
#, no-wrap
msgid "B<-k>, B<--kibi>"
msgstr "B<-k>, B<--kibi>"
#. type: Plain text
#: ../free.1:54
msgid "Display the amount of memory in kibibytes. This is the default."
msgstr "Visa mängden minne i kibibyte. Detta är standardvärdet."
#. type: TP
#: ../free.1:54
#, no-wrap
msgid "B<-m>, B<--mebi>"
msgstr "B<-m>, B<--mebi>"
#. type: Plain text
#: ../free.1:57
msgid "Display the amount of memory in mebibytes."
msgstr "Visa mängden minne i mebibyte."
#. type: TP
#: ../free.1:57
#, no-wrap
msgid "B<-g>, B<--gibi>"
msgstr "B<-g>, B<--gibi>"
#. type: Plain text
#: ../free.1:60
msgid "Display the amount of memory in gibibytes."
msgstr "Visa mängden minne i gibibyte."
#. type: TP
#: ../free.1:60
#, no-wrap
msgid "B<--tebi>"
msgstr "B<--tebi>"
#. type: Plain text
#: ../free.1:63
msgid "Display the amount of memory in tebibytes."
msgstr "Visa mängden minne i tebibyte."
#. type: TP
#: ../free.1:63
#, no-wrap
msgid "B<--pebi>"
msgstr "B<--pebi>"
#. type: Plain text
#: ../free.1:66
msgid "Display the amount of memory in pebibytes."
msgstr "Visa mängden minne i pebibyte."
#. type: TP
#: ../free.1:66
#, no-wrap
msgid "B<--kilo>"
msgstr "B<--kilo>"
#. type: Plain text
#: ../free.1:69
msgid "Display the amount of memory in kilobytes. Implies --si."
msgstr "Visa mängden minne i kilobyte. Implicerar --si."
#. type: TP
#: ../free.1:69
#, no-wrap
msgid "B<--mega>"
msgstr "B<--mega>"
#. type: Plain text
#: ../free.1:72
msgid "Display the amount of memory in megabytes. Implies --si."
msgstr "Visa mängden minne i megabyte. Implicerar --si."
#. type: TP
#: ../free.1:72
#, no-wrap
msgid "B<--giga>"
msgstr "B<--giga>"
#. type: Plain text
#: ../free.1:75
msgid "Display the amount of memory in gigabytes. Implies --si."
msgstr "Visa mängden minne i gigabyte. Implicerar --si."
#. type: TP
#: ../free.1:75
#, no-wrap
msgid "B<--tera>"
msgstr "B<--tera>"
#. type: Plain text
#: ../free.1:78
msgid "Display the amount of memory in terabytes. Implies --si."
msgstr "Visa mängden minne i terabyte. Implicerar --si."
#. type: TP
#: ../free.1:78
#, no-wrap
msgid "B<--peta>"
msgstr "B<--peta>"
#. type: Plain text
#: ../free.1:81
msgid "Display the amount of memory in petabytes. Implies --si."
msgstr "Visa mängden minne i petabyte. Implicerar --si."
#. type: TP
#: ../free.1:81
#, no-wrap
msgid "B<-h>, B<--human>"
msgstr "B<-h>, B<--human>"
#. type: Plain text
#: ../free.1:85
msgid "Show all output fields automatically scaled to shortest three digit unit and display the units of print out. Following units are used."
msgstr "Visa alla utmatningsfält automatiskt skalade till den kortaste enheten med tre siffror och visa enheterna i utskriften. Följande enheter används."
#. type: Plain text
#: ../free.1:93
#, no-wrap
msgid ""
" B = bytes\n"
" Ki = kibibyte\n"
" Mi = mebibyte\n"
" Gi = gibibyte\n"
" Ti = tebibyte\n"
" Pi = pebibyte\n"
msgstr ""
" B = byte\n"
" Ki = kibibyte\n"
" Mi = mebibyte\n"
" Gi = gibibyte\n"
" Ti = tebibyte\n"
" Pi = pebibyte\n"
#. type: Plain text
#: ../free.1:97
msgid "If unit is missing, and you have exbibyte of RAM or swap, the number is in tebibytes and columns might not be aligned with header."
msgstr "Om en enhet saknas, och du har exbibyte med RAM eller växlingsutrymme är talet i tebibyte och kolumnerna är inte nödvändigtvis justerade med rubriken."
#. type: TP
#: ../free.1:97 ../vmstat.8:79
#, no-wrap
msgid "B<-w>, B<--wide>"
msgstr "B<-w>, B<--wide>"
#. type: Plain text
#: ../free.1:102
msgid "Switch to the wide mode. The wide mode produces lines longer than 80 characters. In this mode B<buffers> and B<cache> are reported in two separate columns."
msgstr "Byt till brett läge. Det breda läget skapar rader som är längre än 80 tecken. I detta läge rapporteras B<buffertar> och B<cache> i två separata kolumner."
#. type: TP
#: ../free.1:102
#, no-wrap
msgid "B<-c>, B<--count> I<count>"
msgstr "B<-c>, B<--count> I<antal>"
#. type: Plain text
#: ../free.1:109
msgid "Display the result I<count> times. Requires the B<-s> option."
msgstr "Visa resultatet I<antal> gånger. Kräver flaggan B<-s>."
#. type: TP
#: ../free.1:109
#, no-wrap
msgid "B<-l>, B<--lohi>"
msgstr "B<-l>, B<--lohi>"
#. type: Plain text
#: ../free.1:112
msgid "Show detailed low and high memory statistics."
msgstr "Visa detaljerad statistik över lägsta och högsta minne."
#. type: TP
#: ../free.1:112
#, no-wrap
msgid "B<-s>, B<--seconds> I<delay>"
msgstr "B<-s>, B<--seconds> I<fördröjning>"
#. type: Plain text
#: ../free.1:119
msgid "Continuously display the result I<delay> seconds apart. You may actually specify any floating point number for I<delay> using either . or , for decimal point. B<usleep>(3) is used for microsecond resolution delay times."
msgstr "Visa kontinuerligt resultatet fördröjt I<fördröjning> isär. Du kan faktiskt ange godtyckligt flyttal som I<fördröjning> med antingen . eller , som decimaltecken. B<usleep>(3) används för fördröjningstider med upplösning i mikrosekunder."
#. type: TP
#: ../free.1:119
#, no-wrap
msgid "B<--si>"
msgstr "B<--si>"
#. type: Plain text
#: ../free.1:123
msgid "Use kilo, mega, giga etc (power of 1000) instead of kibi, mebi, gibi (power of 1024)."
msgstr "Använd kilo, mega, giga etc. (potenser av 1000) istället för kibi, mebi, gibi (potenser av 1024)."
#. type: TP
#: ../free.1:123
#, no-wrap
msgid "B<-t>, B<--total>"
msgstr "B<-t>, B<--total>"
#. type: Plain text
#: ../free.1:126
msgid "Display a line showing the column totals."
msgstr "Visa en rad som visar kolumnernas summor."
#. type: TP
#: ../free.1:126 ../w.1:52
#, no-wrap
msgid "B<--help>"
msgstr "B<--help>"
#. type: Plain text
#: ../free.1:129
msgid "Print help."
msgstr "Skriv ut hjälp."
#. type: TP
#: ../free.1:129 ../pgrep.1:200 ../pmap.1:61 ../pwdx.1:13 ../skill.1:61
#: ../slabtop.1:35 ../sysctl.8:123 ../tload.1:30 ../uptime.1:36 ../vmstat.8:84
#: ../w.1:58
#, no-wrap
msgid "B<-V>, B<--version>"
msgstr "B<-V>, B<--version>"
#. type: Plain text
#: ../free.1:132 ../skill.1:64 ../w.1:61
msgid "Display version information."
msgstr "Visa versionsinformation."
#. type: SH
#: ../free.1:133 ../slabtop.1:77 ../sysctl.8:154 ../sysctl.conf.5:57
#: ../tload.1:34 ../uptime.1:39 ../vmstat.8:201 ../w.1:74
#, no-wrap
msgid "FILES"
msgstr "FILER"
#. type: TP
#: ../free.1:134
#, no-wrap
msgid "/proc/meminfo"
msgstr "/proc/meminfo"
#. type: Plain text
#: ../free.1:137
msgid "memory information"
msgstr "minnesinformation"
#. type: SH
#: ../free.1:138 ../pgrep.1:264 ../pidof.1:71 ../tload.1:42 ../vmstat.8:216
#: ../watch.1:126
#, no-wrap
msgid "BUGS"
msgstr "FEL"
#. type: Plain text
#: ../free.1:141
msgid "The value for the B<shared> column is not available from kernels before 2.6.32 and is displayed as zero."
msgstr "Värdet på kolumnen B<delat> är inte tillgängligt från kärnan före 2.6.32 och visas som noll."
#. type: TP
#: ../free.1:141
#, no-wrap
msgid "Please send bug reports to"
msgstr ""
"Skicka synpunkter på översättningen till E<.UR tp-sv@listor.tp-sv.se> E<.UE>\n"
"Skicka felrapporter till"
#. type: Plain text
#: ../free.1:145
msgid "E<.UR procps@freelists.org> E<.UE>"
msgstr "E<.UR procps@freelists.org> E<.UE>"
#. type: SH
#: ../free.1:145 ../kill.1:85 ../pgrep.1:276 ../pidof.1:78 ../pmap.1:79
#: ../pwdx.1:19 ../skill.1:102 ../slabtop.1:81 ../sysctl.8:168
#: ../sysctl.conf.5:76 ../tload.1:37 ../uptime.1:56 ../vmstat.8:208 ../w.1:81
#: ../ps/ps.1:1968
#, no-wrap
msgid "SEE ALSO"
msgstr "SE ÄVEN"
#. type: Plain text
#: ../free.1:149
msgid "B<ps>(1), B<slabtop>(1), B<top>(1), B<vmstat>(8)."
msgstr "B<ps>(1), B<slabtop>(1), B<top>(1), B<vmstat>(8)."
#. type: TH
#: ../kill.1:9
#, no-wrap
msgid "KILL"
msgstr "KILL"
#. type: TH
#: ../kill.1:9
#, no-wrap
msgid "2020-04-24"
msgstr "2020-04-24"
#. type: Plain text
#: ../kill.1:12
msgid "kill - send a signal to a process"
msgstr "kill — skicka en signal till en process"
#. type: Plain text
#: ../kill.1:15
msgid "B<kill> [options] E<lt>pidE<gt> [...]"
msgstr "B<kill> [flaggor] E<lt>pidE<gt> […]"
#. type: Plain text
#: ../kill.1:31
msgid "The default signal for kill is TERM. Use B<-l> or B<-L> to list available signals. Particularly useful signals include HUP, INT, KILL, STOP, CONT, and 0. Alternate signals may be specified in three ways: B<-9>, B<-SIGKILL> or B<-KILL>. Negative PID values may be used to choose whole process groups; see the PGID column in ps command output. A PID of B<-1> is special; it indicates all processes except the kill process itself and init."
msgstr "Standardsignalen för kill är TERM. Använd B<-l> eller B<-L> för att lista tillgängliga signaler. Särskilt användbara signaler inkluderar HUP, INT, KILL, STOP, CONT och 0. Alternativa signaler kan anges på tre sätt: B<-9>, B<-SIGKILL> eller B<-KILL>. Negativa PID-värden kan användas för att välja hela processgrupper; se kolumnen PGID i utdata från kommandot ps. En PID på B<-1> är speciell; den indikerar alla processer utom kill-processen själv och init."
#. type: TP
#: ../kill.1:32
#, no-wrap
msgid "B<E<lt>pidE<gt> [...]>"
msgstr "B<E<lt>pidE<gt> […]>"
#. type: Plain text
#: ../kill.1:35
msgid "Send signal to every E<lt>pidE<gt> listed."
msgstr "Skicka signal till varje listad E<lt>pidE<gt>."
#. type: TP
#: ../kill.1:35
#, no-wrap
msgid "B<-E<lt>signalE<gt>>"
msgstr "B<-E<lt>signalE<gt>>"
#. type: TQ
#: ../kill.1:37
#, no-wrap
msgid "B<-s E<lt>signalE<gt>>"
msgstr "B<-s E<lt>signalE<gt>>"
#. type: TQ
#: ../kill.1:39
#, no-wrap
msgid "B<--signal E<lt>signalE<gt>>"
msgstr "B<--signal E<lt>signalE<gt>>"
#. type: Plain text
#: ../kill.1:47
msgid "Specify the B<signal> to be sent. The signal can be specified by using name or number. The behavior of signals is explained in B<signal>(7) manual page."
msgstr "Ange den B<signal> som skall skickas. Signalen kan anges genom att använda namn eller nummer. Beteendet hos signaler beskrivs i manualsidan B<signal>(7)."
#. type: TP
#: ../kill.1:47 ../pgrep.1:188
#, no-wrap
msgid "B<-q>, B<--queue >I<value>"
msgstr "B<-q>, B<--queue >I<värde>"
#. type: Plain text
#: ../kill.1:59 ../pgrep.1:200
msgid "Use B<sigqueue(3)> rather than B<kill(2)> and the value argument is used to specify an integer to be sent with the signal. If the receiving process has installed a handler for this signal using the SA_SIGINFO flag to B<sigaction(2)> , then it can obtain this data via the si_value field of the siginfo_t structure."
msgstr "Använd B<sigqueue(3)> istället för B<kill(2)> och värdeargumentet används för att ange ett heltal att skickas med signalen. Om den mottagande processen har installerat en hanterare för denna signal med flaggan SA_SIGINFO till B<sigaction(2)> så kan den hämta denna data via fältet si_value i posten siginfo_t."
#. type: TP
#: ../kill.1:59
#, no-wrap
msgid "B<-l>, B<--list> [I<signal>]"
msgstr "B<-l>, B<--list> [I<signal>]"
#. type: Plain text
#: ../kill.1:63
msgid "List signal names. This option has optional argument, which will convert signal number to signal name, or other way round."
msgstr "Lista signalnamn. Denna flagga kan ta ett argument, vilket kommer konvertera signalnummer till signalnamn, eller vice versa."
#. type: TP
#: ../kill.1:63 ../skill.1:45
#, no-wrap
msgid "B<-L>,B<\\ --table>"
msgstr "B<-L>,B<\\ --table>"
#. type: Plain text
#: ../kill.1:66
msgid "List signal names in a nice table."
msgstr "Lista signalnamn i en trevlig tabell."
#. type: SH
#: ../kill.1:68 ../pgrep.1:252 ../slabtop.1:86 ../sysctl.conf.5:35
#: ../vmstat.8:186 ../watch.1:119 ../ps/ps.1:771
#, no-wrap
msgid "NOTES"
msgstr "OBSERVERA"
#. type: Plain text
#: ../kill.1:72
msgid "Your shell (command line interpreter) may have a built-in kill command. You may need to run the command described here as /bin/kill to solve the conflict."
msgstr "Ditt skal (kommandoradstolk) kan ha ett inbyggt kill-kommando. Du kan behöva köra kommandot som beskrivs här som /bin/kill för att lösa upp konflikten."
#. type: SH
#: ../kill.1:72 ../pgrep.1:212 ../skill.1:92 ../sysctl.8:126 ../watch.1:162
#: ../ps/ps.1:96
#, no-wrap
msgid "EXAMPLES"
msgstr "EXEMPEL"
#. type: TP
#: ../kill.1:73
#, no-wrap
msgid "B<kill -9 -1>"
msgstr "B<kill -9 -1>"
#. type: Plain text
#: ../kill.1:76
msgid "Kill all processes you can kill."
msgstr "Döda alla processer du kan döda."
#. type: TP
#: ../kill.1:76
#, no-wrap
msgid "B<kill -l 11>"
msgstr "B<kill -l 11>"
#. type: Plain text
#: ../kill.1:79
msgid "Translate number 11 into a signal name."
msgstr "Översätt nummer 11 till ett signalnamn."
#. type: TP
#: ../kill.1:79
#, no-wrap
msgid "B<kill -L>"
msgstr "B<kill -L>"
#. type: Plain text
#: ../kill.1:82
msgid "List the available signal choices in a nice table."
msgstr "Lista de tillgängliga signalvalen i en trevlig tabell."
#. type: TP
#: ../kill.1:82
#, no-wrap
msgid "B<kill 123 543 2341 3453>"
msgstr "B<kill 123 543 2341 3453>"
#. type: Plain text
#: ../kill.1:85
msgid "Send the default signal, SIGTERM, to all those processes."
msgstr "Skicka standardsignalen, SIGTERM, till alla dessa processer."
#. type: Plain text
#: ../kill.1:94
msgid "B<kill>(2), B<killall>(1), B<nice>(1), B<pkill>(1), B<renice>(1), B<signal>(7), B<sigqueue>(3), B<skill>(1)"
msgstr "B<kill>(2), B<killall>(1), B<nice>(1), B<pkill>(1), B<renice>(1), B<signal>(7), B<sigqueue>(3), B<skill>(1)"
#. type: SH
#: ../kill.1:94 ../pmap.1:82 ../pwdx.1:22 ../skill.1:110 ../ps/ps.1:1973
#, no-wrap
msgid "STANDARDS"
msgstr "STANDARDER"
#. type: Plain text
#: ../kill.1:98
msgid "This command meets appropriate standards. The B<-L> flag is Linux-specific."
msgstr "Detta kommando följer tillämpliga standarder. Flaggan B<-L> är Linux-specifik."
#. type: SH
#: ../kill.1:98 ../pgrep.1:285 ../pidof.1:81 ../pwdx.1:26 ../skill.1:112
#: ../sysctl.8:171 ../sysctl.conf.5:78 ../ps/ps.1:1990
#, no-wrap
msgid "AUTHOR"
msgstr "UPPHOVSMAN"
#. type: Plain text
#: ../kill.1:104
msgid "E<.MT albert@users.sf.net> Albert Cahalan E<.ME> wrote kill in 1999 to replace a bsdutils one that was not standards compliant. The util-linux one might also work correctly."
msgstr "E<.MT albert@users.sf.net> Albert Cahalan E<.ME> skrev kill 1999 för att ersätta en version i bsdutils som inte följde standarder. Versionen i util-linux kan också fungera korrekt."
#. type: SH
#: ../kill.1:104 ../pgrep.1:289 ../pmap.1:86 ../pwdx.1:31 ../skill.1:118
#: ../slabtop.1:104 ../sysctl.8:175 ../sysctl.conf.5:82 ../tload.1:58
#: ../uptime.1:61 ../vmstat.8:228 ../w.1:98
#, no-wrap
msgid "REPORTING BUGS"
msgstr "RAPPORTERA FEL"
#. type: Plain text
#: ../kill.1:107 ../skill.1:121
msgid "Please send bug reports to E<.MT procps@freelists.org> E<.ME>"
msgstr ""
"Skicka felrapporter till E<.MT procps@freelists.org> E<.ME>\n"
"Skicka synpunkter på översättningen till E<.MT tp-sv@listor.tp-sv.se> E<.ME>"
#. type: TH
#: ../pgrep.1:10
#, no-wrap
msgid "PGREP"
msgstr "PGREP"
#. type: TH
#: ../pgrep.1:10 ../pmap.1:8 ../pwdx.1:6 ../sysctl.conf.5:9 ../tload.1:4
#: ../vmstat.8:3 ../w.1:3 ../ps/ps.1:7
#, no-wrap
msgid "2020-06-04"
msgstr "2020-06-04"
#. type: Plain text
#: ../pgrep.1:13
msgid "pgrep, pkill, pwait - look up, signal, or wait for processes based on name and other attributes"
msgstr "pgrep, pkill, pwait — slå upp, signalera eller vänta på processer baserat på namn och andra attribut"
#. type: Plain text
#: ../pgrep.1:16
msgid "B<pgrep> [options] pattern"
msgstr "B<pgrep> [flaggor] mönster"
#. type: Plain text
#: ../pgrep.1:19
msgid "B<pkill> [options] pattern"
msgstr "B<pkill> [flaggor] mönster"
#. type: Plain text
#: ../pgrep.1:22
msgid "B<pwait> [options] pattern"
msgstr "B<pwait> [flaggor] mönster"
#. type: Plain text
#: ../pgrep.1:27
msgid "B<pgrep> looks through the currently running processes and lists the process IDs which match the selection criteria to stdout. All the criteria have to match. For example,"
msgstr "B<pgrep> letar igenom de just nu körande processerna och listar de process-ID:n som matchar urvalskriterierna till standard ut. Alla kriterierna måste matcha. Till exempel,"
#. type: Plain text
#: ../pgrep.1:29
msgid "$ pgrep -u root sshd"
msgstr "$ pgrep -u root sshd"
#. type: Plain text
#: ../pgrep.1:35
msgid "will only list the processes called B<sshd> AND owned by B<root>. On the other hand,"
msgstr "kommer endast lista processerna som heter B<sshd> OCH ägs av B<root>. Å andra sidan,"
#. type: Plain text
#: ../pgrep.1:37
msgid "$ pgrep -u root,daemon"
msgstr "$ pgrep -u root,daemon"
#. type: Plain text
#: ../pgrep.1:42
msgid "will list the processes owned by B<root> OR B<daemon>."
msgstr "kommer lista processerna som ägs av B<root> ELLER B<daemon>."
#. type: Plain text
#: ../pgrep.1:47
msgid "B<pkill> will send the specified signal (by default B<SIGTERM>) to each process instead of listing them on stdout."
msgstr "B<pkill> kommer skicka den angivna signalen (B<SIGTERM> som standard) till varje process istället för att lista dem på standard ut."
#. type: Plain text
#: ../pgrep.1:50
msgid "B<pwait> will wait for each process instead of listing them on stdout."
msgstr "B<pwait> kommer vänta på varje process istället för att räkna upp dem på standard ut."
#. type: TP
#: ../pgrep.1:51
#, no-wrap
msgid "B<->I<signal>"
msgstr "B<->I<signal>"
#. type: TQ
#: ../pgrep.1:53
#, no-wrap
msgid "B<--signal> I<signal>"
msgstr "B<--signal> I<signal>"
#. type: Plain text
#: ../pgrep.1:59
msgid "Defines the signal to send to each matched process. Either the numeric or the symbolic signal name can be used. (B<pkill> only.)"
msgstr "Definierar signalen att skicka till varje matchad process. Både det numeriska eller det symboliska signalnamnet kan användas. (Endast B<pkill>.)"
#. type: TP
#: ../pgrep.1:59
#, no-wrap
msgid "B<-c>, B<--count>"
msgstr "B<-c>, B<--count>"
#. type: Plain text
#: ../pgrep.1:66
#, fuzzy
#| msgid "Suppress normal output; instead print a count of matching processes. When count does not match anything, e.g. returns zero, the command will return non-zero value."
msgid "Suppress normal output; instead print a count of matching processes. When count does not match anything, e.g. returns zero, the command will return non-zero value. Note that for pkill and pwait, the count is the number of matching processes, not the processes that were successfully signaled or waited for."
msgstr "Utelämna normal utmatning; skriv istället antalet processer som matchar. När antalet inte matchar något, d.v.s. returnerar noll, kommer kommandot returnera ett värde skilt från noll."
#. type: TP
#: ../pgrep.1:66
#, no-wrap
msgid "B<-d>, B<--delimiter> I<delimiter>"
msgstr "B<-d>, B<--delimiter> I<avgränsare>"
#. type: Plain text
#: ../pgrep.1:72
msgid "Sets the string used to delimit each process ID in the output (by default a newline). (B<pgrep> only.)"
msgstr "Sätter strängen som används för att avgränsa varje process-ID i utdata (nyrad som standard). (Endast B<pgrep>.)"
#. type: TP
#: ../pgrep.1:72
#, fuzzy, no-wrap
#| msgid "B<-x>, B<--exec>"
msgid "B<-e>, B<--echo>"
msgstr "B<-x>, B<--exec>"
#. type: Plain text
#: ../pgrep.1:77
#, fuzzy
#| msgid "List the process name as well as the process ID. (B<pgrep> only.)"
msgid "Display name and PID of the process being killed. (B<pkill> only.)"
msgstr "Lista processnamnet såväl som process-ID:t. (Endast B<pgrep>.)"
#. type: TP
#: ../pgrep.1:77
#, no-wrap
msgid "B<-f>, B<--full>"
msgstr "B<-f>, B<--full>"
#. type: Plain text
#: ../pgrep.1:84
msgid "The I<pattern> is normally only matched against the process name. When B<-f> is set, the full command line is used."
msgstr "I<Mönstret> matchas normalt endast mot processnamnet. När B<-f> anges används hela kommandoraden."
#. type: TP
#: ../pgrep.1:84
#, no-wrap
msgid "B<-g>, B<--pgroup> I<pgrp>,..."
msgstr "B<-g>, B<--pgroup> I<pgrp>,…"
#. type: Plain text
#: ../pgrep.1:93
#, fuzzy
#| msgid "Only match processes in the process group IDs listed. Process group 0 is translated into B<pgrep>'s or B<pkill>'s own process group."
msgid "Only match processes in the process group IDs listed. Process group 0 is translated into B<pgrep>'s, B<pkill>'s, or B<pwait>'s own process group."
msgstr "Matcha endast processer i de processgrupper vars ID listas. Processgrupp 0 översätts till B<pgrep>s eller B<pkill>s egen processgrupp."
#. type: TP
#: ../pgrep.1:93
#, no-wrap
msgid "B<-G>, B<--group> I<gid>,..."
msgstr "B<-G>, B<--group> I<gid>,…"
#. type: Plain text
#: ../pgrep.1:97
msgid "Only match processes whose real group ID is listed. Either the numerical or symbolical value may be used."
msgstr "Matcha endast processer vars verkliga grupp-ID listas. Både det numeriska och det symboliska värdet kan användas."
#. type: TP
#: ../pgrep.1:97
#, no-wrap
msgid "B<-i>, B<--ignore-case>"
msgstr "B<-i>, B<--ignore-case>"
#. type: Plain text
#: ../pgrep.1:100
msgid "Match processes case-insensitively."
msgstr "Matcha processer skiftlägesokänsligt."
#. type: TP
#: ../pgrep.1:100
#, no-wrap
msgid "B<-l>, B<--list-name>"
msgstr "B<-l>, B<--list-name>"
#. type: Plain text
#: ../pgrep.1:105
msgid "List the process name as well as the process ID. (B<pgrep> only.)"
msgstr "Lista processnamnet såväl som process-ID:t. (Endast B<pgrep>.)"
#. type: TP
#: ../pgrep.1:105
#, no-wrap
msgid "B<-a>, B<--list-full>"
msgstr "B<-a>, B<--list-full>"
#. type: Plain text
#: ../pgrep.1:110
msgid "List the full command line as well as the process ID. (B<pgrep> only.)"
msgstr "Lista den fullständiga kommandoraden såväl som process-ID:t. (Endast B<pgrep>.)"
#. type: TP
#: ../pgrep.1:110
#, no-wrap
msgid "B<-n>, B<--newest>"
msgstr "B<-n>, B<--newest>"
#. type: Plain text
#: ../pgrep.1:113
msgid "Select only the newest (most recently started) of the matching processes."
msgstr "Välj endast den nyaste (senast startade) av de matchande processerna."
#. type: TP
#: ../pgrep.1:113
#, no-wrap
msgid "B<-o>, B<--oldest>"
msgstr "B<-o>, B<--oldest>"
#. type: Plain text
#: ../pgrep.1:116
msgid "Select only the oldest (least recently started) of the matching processes."
msgstr "Välj endast den äldsta (minst nyligen startade) av de matchande processerna."
#. type: TP
#: ../pgrep.1:116
#, fuzzy, no-wrap
#| msgid "B<-d>, B<--delay> I<seconds>"
msgid "B<-O>, B<--older> I<secs>"
msgstr "B<-d>, B<--delay> I<sekunder>"
#. type: Plain text
#: ../pgrep.1:119
msgid "Select processes older than secs."
msgstr "Välj processer som är äldre än sek."
#. type: TP
#: ../pgrep.1:119
#, no-wrap
msgid "B<-P>, B<--parent> I<ppid>,..."
msgstr "B<-P>, B<--parent> I<fpid>,…"
#. type: Plain text
#: ../pgrep.1:122
msgid "Only match processes whose parent process ID is listed."
msgstr "Matcha endast processer vars föräldraprocess-ID listas."
#. type: TP
#: ../pgrep.1:122
#, no-wrap
msgid "B<-s>, B<--session> I<sid>,..."
msgstr "B<-s>, B<--session> I<sid>,…"
#. type: Plain text
#: ../pgrep.1:131
msgid "Only match processes whose process session ID is listed. Session ID 0 is translated into B<pgrep>'s, B<pkill>'s, or B<pwait>'s own session ID."
msgstr "Matcha endast processer vars processessions-ID listas. Sessions-ID 0 översätts till B<pgrep>s, B<pkill>s eller B<pwait>s eget sessions-ID."
#. type: TP
#: ../pgrep.1:131
#, no-wrap
msgid "B<-t>, B<--terminal> I<term>,..."
msgstr "B<-t>, B<--terminal> I<term>,…"
#. type: Plain text
#: ../pgrep.1:135
msgid "Only match processes whose controlling terminal is listed. The terminal name should be specified without the \"/dev/\" prefix."
msgstr "Matcha endast processer vars styrande terminal listas. Terminalnamnet skall anges utan prefixet ”/dev/”."
#. type: TP
#: ../pgrep.1:135
#, no-wrap
msgid "B<-u>, B<--euid> I<euid>,..."
msgstr "B<-u>, B<--euid> I<eaid>,…"
#. type: Plain text
#: ../pgrep.1:139
msgid "Only match processes whose effective user ID is listed. Either the numerical or symbolical value may be used."
msgstr "Matcha endast processer vars effektiva användar-ID listas. Både det numeriska och symboliska värdet kan användas."
#. type: TP
#: ../pgrep.1:139
#, no-wrap
msgid "B<-U>, B<--uid> I<uid>,..."
msgstr "B<-U>, B<--uid> I<aid>,…"
#. type: Plain text
#: ../pgrep.1:143
msgid "Only match processes whose real user ID is listed. Either the numerical or symbolical value may be used."
msgstr "Matcha endast processer vars verkliga användar-ID listas. Både det numeriska och symboliska värdet kan användas."
#. type: TP
#: ../pgrep.1:143
#, no-wrap
msgid "B<-v>, B<--inverse>"
msgstr "B<-v>, B<--inverse>"
#. type: Plain text
#: ../pgrep.1:152
msgid "Negates the matching. This option is usually used in B<pgrep>'s or B<pwait>'s context. In B<pkill>'s context the short option is disabled to avoid accidental usage of the option."
msgstr "Negerar matchningen. Denna flagga används oftast i B<pgrep>s eller B<pwait>s sammanhang. I B<pkill>s sammanhang är den korta flaggan avaktiverad för att undvika att flaggan används av misstag."
#. type: TP
#: ../pgrep.1:152
#, no-wrap
msgid "B<-w>, B<--lightweight>"
msgstr "B<-w>, B<--lightweight>"
#. type: Plain text
#: ../pgrep.1:161
msgid "Shows all thread ids instead of pids in B<pgrep>'s or B<pwait>'s context. In B<pkill>'s context this option is disabled."
msgstr "Visar alla tråd-id:n istället för pid:n i B<pgrep>s eller B<pwait>s sammanhang. I B<pkill>s sammanhang är denna flagga avaktiverad."
#. type: TP
#: ../pgrep.1:161
#, no-wrap
msgid "B<-x>, B<--exact>"
msgstr "B<-x>, B<--exact>"
#. type: Plain text
#: ../pgrep.1:167
#, fuzzy
#| msgid "Only match processes whose names (or command line if -f is specified) B<exactly> match the I<pattern>."
msgid "Only match processes whose names (or command lines if B<-f> is specified) B<exactly> match the I<pattern>."
msgstr "Matcha endast processer vars namn (eller kommandorad om -f anges) B<exakt> matchar I<mönstret>."
#. type: TP
#: ../pgrep.1:167
#, no-wrap
msgid "B<-F>, B<--pidfile> I<file>"
msgstr "B<-F>, B<--pidfile> I<fil>"
#. type: Plain text
#: ../pgrep.1:173
#, fuzzy
#| msgid "Read I<PID>'s from file. This option is perhaps more useful for B<pkill> than B<pgrep>."
msgid "Read I<PID>s from I<file>. This option is more useful for B<pkill>orB<pwait> than B<pgrep>."
msgstr "Läs I<PID>:n från en fil. Denna flagga är kanske mer användbar för B<pkill> än B<pgrep>."
#. type: TP
#: ../pgrep.1:173
#, no-wrap
msgid "B<-L>, B<--logpidfile>"
msgstr "B<-L>, B<--logpidfile>"
#. type: Plain text
#: ../pgrep.1:176
#, fuzzy
#| msgid "Fail if pidfile (see -F) not locked."
msgid "Fail if pidfile (see B<-F>) not locked."
msgstr "Misslyckas om pid-filen (se -F) inte är låst."
#. type: TP
#: ../pgrep.1:176
#, no-wrap
msgid "B<-r>, B<--runstates> I<D,R,S,Z,>..."
msgstr "B<-r>, B<--runstates> I<D,R,S,Z>,…"
#. type: Plain text
#: ../pgrep.1:179
msgid "Match only processes which match the process state."
msgstr "Matcha endast processer som matchar processtillståndet."
#. type: TP
#: ../pgrep.1:179 ../skill.1:80
#, no-wrap
msgid "B<--ns >I<pid>"
msgstr "B<--ns >I<pid>"
#. type: Plain text
#: ../pgrep.1:184
#, fuzzy
#| msgid "Match processes that belong to the same namespaces. Required to run as root to match processes from other users. See --nslist for how to limit which namespaces to match."
msgid "Match processes that belong to the same namespaces. Required to run as root to match processes from other users. See B<--nslist> for how to limit which namespaces to match."
msgstr "Matcha processer som hör till samma namnrymder. Måste köras som root för att matcha andra användares processer. Se --nslist för hur man begränsar vilka namnrymder som skall matchas."
#. type: TP
#: ../pgrep.1:184
#, no-wrap
msgid "B<--nslist >I<name>B<,...>"
msgstr "B<--nslist >I<namn>B<,…>"
#. type: Plain text
#: ../pgrep.1:188
msgid "Match only the provided namespaces. Available namespaces: ipc, mnt, net, pid, user,uts."
msgstr "Matcha endast de angivna namnrymderna. Tillgängliga namnrymder: ipc, mnt, net, pid, user, uts."
#. type: Plain text
#: ../pgrep.1:203 ../pmap.1:64 ../slabtop.1:38 ../sysctl.8:126 ../tload.1:33
#: ../vmstat.8:87 ../watch.1:76
msgid "Display version information and exit."
msgstr "Visa versionsinformation och avsluta."
#. type: TP
#: ../pgrep.1:203 ../pmap.1:58 ../pwdx.1:16 ../skill.1:58 ../slabtop.1:38
#: ../sysctl.8:120 ../tload.1:27 ../uptime.1:30 ../vmstat.8:87 ../watch.1:70
#, no-wrap
msgid "B<-h>, B<--help>"
msgstr "B<-h>, B<--help>"
#. type: Plain text
#: ../pgrep.1:206 ../vmstat.8:90
msgid "Display help and exit."
msgstr "Visa hjälp och avsluta."
#. type: SH
#: ../pgrep.1:207
#, no-wrap
msgid "OPERANDS"
msgstr "OPERANDER"
#. type: TP
#: ../pgrep.1:208
#, no-wrap
msgid "I<pattern>"
msgstr "I<mönster>"
#. type: Plain text
#: ../pgrep.1:212
msgid "Specifies an Extended Regular Expression for matching against the process names or command lines."
msgstr "Specificerar ett utökat reguljärt uttryck att matcha mot processnamnen eller kommandoraderna."
#. type: Plain text
#: ../pgrep.1:216
msgid "Example 1: Find the process ID of the B<named> daemon:"
msgstr "Exempel 1: Hitta process-ID:t för demonen B<named>:"
#. type: Plain text
#: ../pgrep.1:218
msgid "$ pgrep -u root named"
msgstr "$ pgrep -u root named"
#. type: Plain text
#: ../pgrep.1:222
msgid "Example 2: Make B<syslog> reread its configuration file:"
msgstr "Exempel 2: Få B<syslog> att läsa om sin konfigurationsfil:"
#. type: Plain text
#: ../pgrep.1:224
msgid "$ pkill -HUP syslogd"
msgstr "$ pkill -HUP syslogd"
#. type: Plain text
#: ../pgrep.1:228
msgid "Example 3: Give detailed information on all B<xterm> processes:"
msgstr "Exempel 3: Ge detaljerad information om alla B<xterm>-processer:"
#. type: Plain text
#: ../pgrep.1:230
msgid "$ ps -fp $(pgrep -d, -x xterm)"
msgstr "$ ps -fp $(pgrep -d, -x xterm)"
#. type: Plain text
#: ../pgrep.1:234
msgid "Example 4: Make all B<chrome> processes run nicer:"
msgstr "Exempel 4: Få alla B<chrome>-processer köra med nice:"
#. type: Plain text
#: ../pgrep.1:236
msgid "$ renice +4 $(pgrep chrome)"
msgstr "$ renice +4 $(pgrep chrome)"
#. type: SH
#: ../pgrep.1:236 ../pidof.1:63 ../pmap.1:64 ../watch.1:76
#, no-wrap
msgid "EXIT STATUS"
msgstr "SLUTSTATUS"
#. type: TP
#: ../pgrep.1:238
#, no-wrap
msgid "0"
msgstr "0"
#. type: Plain text
#: ../pgrep.1:242
#, fuzzy
#| msgid "One or more processes matched the criteria. For pkill the process must also have been successfully signalled."
msgid "One or more processes matched the criteria. For pkill and pwait, one or more processes must also have been successfully signalled or waited for."
msgstr "En eller flera processer matchar kriterierna. För pkill måste även processen framgångsrikt ha signalerats."
#. type: IP
#: ../pgrep.1:242 ../ps/ps.1:43 ../ps/ps.1:819 ../ps/ps.1:1979
#, no-wrap
msgid "1"
msgstr "1"
#. type: Plain text
#: ../pgrep.1:245
msgid "No processes matched or none of them could be signalled."
msgstr "Inga processer matchade eller inga av dem kunde signaleras."
#. type: IP
#: ../pgrep.1:245 ../ps/ps.1:45 ../ps/ps.1:1981
#, no-wrap
msgid "2"
msgstr "2"
#. type: Plain text
#: ../pgrep.1:248
msgid "Syntax error in the command line."
msgstr "Syntaxfel på kommandoraden."
#. type: IP
#: ../pgrep.1:248 ../ps/ps.1:47 ../ps/ps.1:1983
#, no-wrap
msgid "3"
msgstr "3"
#. type: Plain text
#: ../pgrep.1:251
msgid "Fatal error: out of memory etc."
msgstr "Ödesdigert fel: slut på minne etc."
#. type: Plain text
#: ../pgrep.1:256
#, fuzzy
#| msgid "The process name used for matching is limited to the 15 characters present in the output of /proc/I<pid>/stat. Use the -f option to match against the complete command line, /proc/I<pid>/cmdline."
msgid "The process name used for matching is limited to the 15 characters present in the output of /proc/I<pid>/stat. Use the B<-f> option to match against the complete command line, /proc/I<pid>/cmdline."
msgstr "Processnamnet som används för att matcha är begränsat till de 15 tecknen som är med i utdata från /proc/I<pid>/stat. Använd flaggan -f för att matcha mot den fullständiga kommandoraden, /proc/I<pid>/cmdline."
#. type: Plain text
#: ../pgrep.1:264
#, fuzzy
#| msgid "The running B<pgrep> or B<pkill> process will never report itself as a match."
msgid "The running B<pgrep>, B<pkill>, or B<pwait> process will never report itself as a match."
msgstr "Den körande B<pgrep>- eller B<pkill>-processen kommer aldrig rapportera sig själv som en matchning."
#. type: Plain text
#: ../pgrep.1:273
msgid "The options B<-n> and B<-o> and B<-v> can not be combined. Let me know if you need to do this."
msgstr "Flaggorna B<-n> och B<-o> och B<-v> kan inte kombineras. Berätta för mig om du behöver kunna göra detta."
#. type: Plain text
#: ../pgrep.1:275
msgid "Defunct processes are reported."
msgstr "Döda (defunct) processer rapporteras."
#. type: Plain text
#: ../pgrep.1:285
#, fuzzy
#| msgid "B<ps>(1), B<regex>(7), B<signal>(7), B<killall>(1), B<skill>(1), B<kill>(1), B<kill>(2)"
msgid "B<ps>(1), B<regex>(7), B<signal>(7), B<sigqueue>(3), B<killall>(1), B<skill>(1), B<kill>(1), B<kill>(2)"
msgstr "B<ps>(1), B<regex>(7), B<signal>(7), B<killall>(1), B<skill>(1), B<kill>(1), B<kill>(2)"
#. type: Plain text
#: ../pgrep.1:289
msgid "E<.UR kjetilho@ifi.uio.no> Kjetil Torgrim Homme E<.UE>"
msgstr "E<.UR kjetilho@ifi.uio.no> Kjetil Torgrim Homme E<.UE>"
#. type: Plain text
#: ../pgrep.1:292 ../pmap.1:89 ../pwdx.1:34 ../slabtop.1:107 ../sysctl.8:178
#: ../sysctl.conf.5:85 ../tload.1:61 ../uptime.1:64 ../vmstat.8:231 ../w.1:101
msgid "Please send bug reports to E<.UR procps@freelists.org> E<.UE>"
msgstr ""
"Skicka felrapporter till E<.UR procps@freelists.org> E<.UE>\n"
"Skicka synpunkter på översättningen till E<.UR tp-sv@listor.tp-sv.se> E<.UE>"
#. type: TH
#: ../pidof.1:18
#, no-wrap
msgid "PIDOF"
msgstr "PIDOF"
#. type: TH
#: ../pidof.1:18
#, no-wrap
msgid "2020-12-22"
msgstr "2020-12-22"
#. type: Plain text
#: ../pidof.1:21
msgid "pidof -- find the process ID of a running program"
msgstr "pidof — hitta process-ID för ett körande program"
#. type: Plain text
#: ../pidof.1:34
msgid "B<pidof> [B<-s>] [B<-c>] [B<-q>] [B<-w>] [B<-x>] [B<-o> I<omitpid[,omitpid...]...>] [B<-S> I<separator>] B<program> [B<program...>]"
msgstr "B<pidof> [B<-s>] [B<-c>] [B<-q>] [B<-w>] [B<-x>] [B<-o> I<skippapid[,skippapid…]…>] [B<-S> I<separator>] B<program> [B<program…>]"
#. type: Plain text
#: ../pidof.1:38
msgid "B<Pidof> finds the process id's (pids) of the named programs. It prints those id's on the standard output."
msgstr "B<Pidof> hittar process-id:t (pid:ar) för de namngivna programmen. Det skriver ut dessa id:n till standard ut."
#. type: IP
#: ../pidof.1:39
#, no-wrap
msgid "-s"
msgstr "-s"
#. type: Plain text
#: ../pidof.1:41
msgid "Single shot - this instructs the program to only return one I<pid>."
msgstr "Enkelskott — detta instruerar programmet att endast returnera en I<pid>."
#. type: IP
#: ../pidof.1:41
#, no-wrap
msgid "-c"
msgstr "-c"
#. type: Plain text
#: ../pidof.1:45
msgid "Only return process ids that are running with the same root directory. This option is ignored for non-root users, as they will be unable to check the current root directory of processes they do not own."
msgstr "Returnera endast process-id:n som kör med samma rotkatalog. Denna flagga ignoreras för andra användare än root, eftersom de inte kommer kunna kontrollera den aktuella rotkatalogen för processer de inte äger."
#. type: IP
#: ../pidof.1:45
#, no-wrap
msgid "-q"
msgstr "-q"
#. type: Plain text
#: ../pidof.1:47
msgid "Quiet mode, suppress any output and only sets the exit status accordingly."
msgstr "Tyst läge, undertryck all utdata och sätt bara slutstatus."
#. type: IP
#: ../pidof.1:47
#, no-wrap
msgid "-w"
msgstr "-w"
#. type: Plain text
#: ../pidof.1:50
msgid "Show also processes that do not have visible command line (e.g. kernel worker threads)."
msgstr "Visa även processer som inte har en synlig kommandorad (t.ex. kärnarbetstrådar)."
#. type: IP
#: ../pidof.1:50
#, no-wrap
msgid "-x"
msgstr "-x"
#. type: Plain text
#: ../pidof.1:53
msgid "Scripts too - this causes the program to also return process id's of shells running the named scripts."
msgstr "Även skript — detta får programmet att även returnera process-id:n för skal som kör de namngivna skripten."
#. type: IP
#: ../pidof.1:53
#, no-wrap
msgid "-o I<omitpid>"
msgstr "-o I<skippapid>"
#. type: Plain text
#: ../pidof.1:57
msgid "Tells I<pidof> to omit processes with that process id. The special pid B<%PPID> can be used to name the parent process of the I<pidof> program, in other words the calling shell or shell script."
msgstr "Säger till I<pidof> att utesluta processer med det process-id:t. Den speciella processen B<%PPID> kan användas för att namnge föräldraprocessen till I<pidof>-programmet, med andra ord det anropande skalet eller skalskriptet."
#. type: IP
#: ../pidof.1:57
#, no-wrap
msgid "-S I<separator>"
msgstr "-S I<separator>"
#. type: Plain text
#: ../pidof.1:63
msgid "Use I<separator> as a separator put between pids. Used only when more than one pids are printed for the program. The B<-d> option is an alias for this option for sysvinit B<pidof> compatibility."
msgstr "Använd I<separator> som separator placerad mellan pid:er. Använd endast när mer än en pid skrivs för programmet. Flaggan B<-d> är ett alias för denna flagga för kompatibilitet med sysvinit:s B<pidof>."
#. type: TP
#: ../pidof.1:64 ../pmap.1:68 ../watch.1:80
#, no-wrap
msgid "B<0>"
msgstr "B<0>"
#. type: Plain text
#: ../pidof.1:67
msgid "At least one program was found with the requested name."
msgstr "Åtminstone ett program hittades med det begärda namnet."
#. type: TP
#: ../pidof.1:67 ../pmap.1:71 ../watch.1:83
#, no-wrap
msgid "B<1>"
msgstr "B<1>"
#. type: Plain text
#: ../pidof.1:70
msgid "No program was found with the requested name."
msgstr "Inget program hittades med det begärda namnet."
#. type: Plain text
#: ../pidof.1:77
msgid "When using the I<-x> option, B<pidof> only has a simple method for detecting scripts and will miss scripts that, for example, use env. This limitation is due to how the scripts look in the proc filesystem."
msgstr "När flaggan I<-x> används har B<pidof> endast en enkel metod för att upptäcka skript och kommer missa skript som, till exempel, använder env. Denna begränsning beror på hur skripten ser ut i proc-filsystemet."
#. type: Plain text
#: ../pidof.1:81
msgid "B<pgrep>(1), B<pkill>(1)"
msgstr "B<pgrep>(1), B<pkill>(1)"
#. type: Plain text
#: ../pidof.1:82
msgid "Jaromir Capik E<lt>jcapik@redhat.comE<gt>"
msgstr "Jaromír Cápíc E<lt>jcapik@redhat.comE<gt>"
#. type: TH
#: ../pmap.1:8
#, no-wrap
msgid "PMAP"
msgstr "PMAP"
#. type: Plain text
#: ../pmap.1:11
msgid "pmap - report memory map of a process"
msgstr "pmap — rapportera minneskartan över en process"
#. type: Plain text
#: ../pmap.1:14
msgid "B<pmap> [I<options>] I<pid> [...]"
msgstr "B<pmap> [I<flaggor>] I<pid> […]"
#. type: Plain text
#: ../pmap.1:18
msgid "The B<pmap> command reports the memory map of a process or processes."
msgstr "Kommandot B<pmap> rapporterar minneskartan över en process eller processer."
#. type: TP
#: ../pmap.1:19
#, no-wrap
msgid "B<-x>, B<--extended>"
msgstr "B<-x>, B<--extended>"
#. type: Plain text
#: ../pmap.1:22
msgid "Show the extended format."
msgstr "Visa det utökade formatet."
#. type: TP
#: ../pmap.1:22
#, no-wrap
msgid "B<-d>, B<--device>"
msgstr "B<-d>, B<--device>"
#. type: Plain text
#: ../pmap.1:25
msgid "Show the device format."
msgstr "Visa enhetsformatet."
#. type: TP
#: ../pmap.1:25 ../sysctl.8:52
#, no-wrap
msgid "B<-q>, B<--quiet>"
msgstr "B<-q>, B<--quiet>"
#. type: Plain text
#: ../pmap.1:28
msgid "Do not display some header or footer lines."
msgstr "Visa inte några huvud- och fotrader."
#. type: TP
#: ../pmap.1:28
#, no-wrap
msgid "B<-A>, B<--range> I<low>,I<high>"
msgstr "B<-A>, B<--range> I<låg>,I<hög>"
#. type: Plain text
#: ../pmap.1:36
msgid "Limit results to the given range to I<low> and I<high> address range. Notice that the low and high arguments are single string separated with comma."
msgstr "Begränsa resultaten till adressintervallet från I<låg> till I<hög>. Observera att argumenten låg och hög är en enda sträng separerad med komma."
#. type: TP
#: ../pmap.1:36 ../sysctl.8:111
#, no-wrap
msgid "B<-X>"
msgstr "B<-X>"
#. type: Plain text
#: ../pmap.1:40
msgid "Show even more details than the B<-x> option. WARNING: format changes according to I</proc/PID/smaps>"
msgstr "Visa ännu fler detaljer än flaggan B<-x>. VARNING: formatet ändras i enlighet med I</proc/PID/smaps>"
#. type: TP
#: ../pmap.1:40
#, no-wrap
msgid "B<-XX>"
msgstr "B<-XX>"
#. type: Plain text
#: ../pmap.1:43
msgid "Show everything the kernel provides"
msgstr "Visa allt kärnan tillhandahåller"
#. type: TP
#: ../pmap.1:43
#, no-wrap
msgid "B<-p>, B<--show-path>"
msgstr "B<-p>, B<--show-path>"
#. type: Plain text
#: ../pmap.1:46
msgid "Show full path to files in the mapping column"
msgstr "Visa den fullständiga sökvägen till filer i mappningskolumnen"
#. type: TP
#: ../pmap.1:46
#, no-wrap
msgid "B<-c>, B<--read-rc>"
msgstr "B<-c>, B<--read-rc>"
#. type: Plain text
#: ../pmap.1:49
msgid "Read the default configuration"
msgstr "Läs standardkonfigurationen"
#. type: TP
#: ../pmap.1:49
#, no-wrap
msgid "B<-C>, B<--read-rc-from> I<file>"
msgstr "B<-C>, B<--read-rc-from> I<fil>"
#. type: Plain text
#: ../pmap.1:52
msgid "Read the configuration from I<file>"
msgstr "Läs konfigurationen från I<fil>"
#. type: TP
#: ../pmap.1:52
#, no-wrap
msgid "B<-n>, B<--create-rc>"
msgstr "B<-n>, B<--create-rc>"
#. type: Plain text
#: ../pmap.1:55
msgid "Create new default configuration"
msgstr "Skapa en ny standardkonfiguration"
#. type: TP
#: ../pmap.1:55
#, no-wrap
msgid "B<-N>, B<--create-rc-to> I<file>"
msgstr "B<-N>, B<--create-rc-to> I<fil>"
#. type: Plain text
#: ../pmap.1:58
msgid "Create new configuration to I<file>"
msgstr "Skapa en ny konfiguration i I<fil>"
#. type: Plain text
#: ../pmap.1:61 ../skill.1:61 ../sysctl.8:123 ../w.1:55 ../watch.1:73
msgid "Display help text and exit."
msgstr "Visa hjälptext och avsluta."
#. type: Plain text
#: ../pmap.1:71 ../watch.1:83
msgid "Success."
msgstr "Gick bra."
#. type: Plain text
#: ../pmap.1:74
msgid "Failure."
msgstr "Misslyckades."
#. type: TP
#: ../pmap.1:74
#, no-wrap
msgid "B<42>"
msgstr "B<42>"
#. type: Plain text
#: ../pmap.1:77
msgid "Did not find all processes asked for."
msgstr "Hittade inte alla efterfrågade processer."
#. type: Plain text
#: ../pmap.1:82 ../pwdx.1:22
msgid "B<ps>(1), B<pgrep>(1)"
msgstr "B<ps>(1), B<pgrep>(1)"
#. type: Plain text
#: ../pmap.1:86
msgid "No standards apply, but B<pmap> looks an awful lot like a SunOS command."
msgstr "Inga standarder är tillämpliga, men B<pmap> liknar väldigt mycket ett SunOS-kommando."
#. type: TH
#: ../pwdx.1:6
#, no-wrap
msgid "PWDX"
msgstr "PWDX"
#. type: Plain text
#: ../pwdx.1:9
msgid "pwdx - report current working directory of a process"
msgstr "pwdx — rapportera aktuell katalog för en process"
#. type: Plain text
#: ../pwdx.1:12
msgid "B<pwdx> [I<options>] I<pid> [...]"
msgstr "B<pwdx> [I<flaggor>] I<pid> […]"
#. type: Plain text
#: ../pwdx.1:16
msgid "Output version information and exit."
msgstr "Skriv ut versionsinformation och avsluta."
#. type: Plain text
#: ../pwdx.1:19
msgid "Output help screen and exit."
msgstr "Skriv ut en hjälpskärm och avsluta."
#. type: Plain text
#: ../pwdx.1:26
msgid "No standards apply, but B<pwdx> looks an awful lot like a SunOS command."
msgstr "Inga standarder är tillämpliga, men B<pwdx> liknar väldigt mycket ett SunOS-kommando."
#. type: Plain text
#: ../pwdx.1:31
msgid "E<.UR nmiell@gmail.com> Nicholas Miell E<.UE> wrote pwdx in 2004."
msgstr "E<.UR nmiell@gmail.com> Nicholas Miell E<.UE> skrev pwdx 2004."
#. type: TH
#: ../skill.1:9
#, no-wrap
msgid "SKILL"
msgstr "SKILL"
#. type: Plain text
#: ../skill.1:12
msgid "skill, snice - send a signal or report process status"
msgstr "skill, snice — skicka en signal eller rapportera processtatus"
#. type: Plain text
#: ../skill.1:17
msgid "B<skill> [I<signal>] [I<options>] I<expression>"
msgstr "B<skill> [I<signal>] [I<flaggor>] I<uttryck>"
#. type: Plain text
#: ../skill.1:22
msgid "B<snice> [I<new priority>] [I<options>] I<expression>"
msgstr "B<snice> [I<ny prioritet>] [I<flaggor>] I<uttryck>"
#. type: Plain text
#: ../skill.1:26
msgid "These tools are obsolete and unportable. The command syntax is poorly defined. Consider using the killall, pkill, and pgrep commands instead."
msgstr "Dessa verktyg är föråldrade och oportabla. Kommandosyntaxen är dåligt definierad. Överväg att använda kommandona killall, pkill och pgrep istället."
#. type: Plain text
#: ../skill.1:31
msgid "The default signal for skill is TERM. Use -l or -L to list available signals. Particularly useful signals include HUP, INT, KILL, STOP, CONT, and 0. Alternate signals may be specified in three ways: -9 -SIGKILL -KILL."
msgstr "Standardsignalen för skill är TERM. Använd -l eller -L för att lista tillgängliga signaler. Särskilt användbara signaler inkluderar HUP, INT, KILL, STOP, CONT och 0. Alternativa signaler kan anges på tre sätt: -9 -SIGKILL -KILL."
#. type: Plain text
#: ../skill.1:35
msgid "The default priority for snice is +4. Priority numbers range from +20 (slowest) to -20 (fastest). Negative priority numbers are restricted to administrative users."
msgstr "Standardprioriteten för snice är +4. Prioritetstal går från +20 (långsammast) till -20 (snabbast. Negativa prioritetsvärden är begränsade till administrativa användare."
#. type: TP
#: ../skill.1:36
#, no-wrap
msgid "B<-f>,B<\\ --fast>"
msgstr "B<-f>,B<\\ --fast>"
#. type: Plain text
#: ../skill.1:39
msgid "Fast mode. This option has not been implemented."
msgstr "Snabbt läge. Denna flagga har inte implementerats."
#. type: TP
#: ../skill.1:39
#, no-wrap
msgid "B<-i>,B<\\ --interactive>"
msgstr "B<-i>,B<\\ --interactive>"
#. type: Plain text
#: ../skill.1:42
msgid "Interactive use. You will be asked to approve each action."
msgstr "Interaktiv användning. Du kommer få en fråga om att godkänna varje åtgärd."
#. type: TP
#: ../skill.1:42
#, no-wrap
msgid "B<-l>,B<\\ --list>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../skill.1:45
msgid "List all signal names."
msgstr "Lista alla signalnamn."
#. type: Plain text
#: ../skill.1:48
msgid "List all signal names in a nice table."
msgstr "Lista alla signalnamn i en trevlig tabell."
#. type: TP
#: ../skill.1:48
#, no-wrap
msgid "B<-n>,B<\\ --no-action>"
msgstr "B<-n>,B<\\ --no-action>"
#. type: Plain text
#: ../skill.1:52
msgid "No action; perform a simulation of events that would occur but do not actually change the system."
msgstr "Ingen åtgärd; utför en simulering av de händelser som skulle ske men gör ingen faktisk ändring av systemet."
#. type: TP
#: ../skill.1:52
#, no-wrap
msgid "B<-v>,B<\\ --verbose>"
msgstr "B<-v>,B<\\ --verbose>"
#. type: Plain text
#: ../skill.1:55
msgid "Verbose; explain what is being done."
msgstr "Utförlig; förklara vad som görs."
#. type: TP
#: ../skill.1:55
#, no-wrap
msgid "B<-w>,B<\\ --warnings>"
msgstr "B<-w>,B<\\ --warnings>"
#. type: Plain text
#: ../skill.1:58
msgid "Enable warnings. This option has not been implemented."
msgstr "Aktivera varningar. Denna flagga har inte implementerats."
#. type: SH
#: ../skill.1:65
#, no-wrap
msgid "PROCESS SELECTION OPTIONS"
msgstr "FLAGGOR FÖR VAL AV PROCESS"
#. type: Plain text
#: ../skill.1:68
msgid "Selection criteria can be: terminal, user, pid, command. The options below may be used to ensure correct interpretation."
msgstr "Urvalskriterier kan vara: terminal, användare, pid, kommando. Flaggorna nedan kan användas för att säkerställa rätt tolkning."
#. type: TP
#: ../skill.1:68
#, no-wrap
msgid "B<-t>, B<--tty> I<tty>"
msgstr "B<-t>, B<--tty> I<tty>"
#. type: Plain text
#: ../skill.1:71
msgid "The next expression is a terminal (tty or pty)."
msgstr "Nästa uttryck är en terminal (tty eller pty)."
#. type: TP
#: ../skill.1:71
#, no-wrap
msgid "B<-u>, B<--user> I<user>"
msgstr "B<-u>, B<--user> I<användare>"
#. type: Plain text
#: ../skill.1:74
msgid "The next expression is a username."
msgstr "Nästa uttryck är ett användarnamn."
#. type: TP
#: ../skill.1:74
#, no-wrap
msgid "B<-p>, B<--pid> I<pid>"
msgstr "B<-p>, B<--pid> I<pid>"
#. type: Plain text
#: ../skill.1:77
msgid "The next expression is a process ID number."
msgstr "Nästa uttryck är ett process-ID-nummer."
#. type: TP
#: ../skill.1:77
#, no-wrap
msgid "B<-c>, B<--command> I<command>"
msgstr "B<-c>, B<--command> I<kommando>"
#. type: Plain text
#: ../skill.1:80
msgid "The next expression is a command name."
msgstr "Nästa uttryck är ett kommandonamn."
#. type: Plain text
#: ../skill.1:83
msgid "Match the processes that belong to the same namespace as pid."
msgstr "Matcha processerna som tillhör samma namnrymd som pid."
#. type: TP
#: ../skill.1:83
#, no-wrap
msgid "B<--nslist >I<ns\\/>,\\,I<...\\/>"
msgstr "B<--nslist >I<ns\\/>,\\,I<…\\/>"
#. type: Plain text
#: ../skill.1:87
msgid "list which namespaces will be considered for the --ns option. Available namespaces: ipc, mnt, net, pid, user, uts."
msgstr "lista vilka namnrymder som övervägs för flaggan --ns. Tillgängliga namnrymder: ipc, mnt, net, pid, user, uts."
#. type: SH
#: ../skill.1:88
#, no-wrap
msgid "SIGNALS"
msgstr "SIGNALER"
#. type: Plain text
#: ../skill.1:92
msgid "The behavior of signals is explained in B<signal>(7) manual page."
msgstr "Beteendet hos signaler förklaras i manualsidan B<signal>(7)."
#. type: TP
#: ../skill.1:93
#, no-wrap
msgid "B<snice -c seti -c crack +7>"
msgstr "B<snice -c seti -c crack +7>"
#. type: Plain text
#: ../skill.1:96
msgid "Slow down seti and crack commands."
msgstr "Sakta ner kommandona seti och crack."
#. type: TP
#: ../skill.1:96
#, no-wrap
msgid "B<skill -KILL -t /dev/pts/*>"
msgstr "B<skill -KILL -t /dev/pts/*>"
#. type: Plain text
#: ../skill.1:99
msgid "Kill users on PTY devices."
msgstr "Döda användare på PTY-enheter."
#. type: TP
#: ../skill.1:99
#, no-wrap
msgid "B<skill -STOP -u viro -u lm -u davem>"
msgstr "B<skill -STOP -u viro -u lm -u davem>"
#. type: Plain text
#: ../skill.1:102
msgid "Stop three users."
msgstr "Stoppa tre användare."
#. type: Plain text
#: ../skill.1:110
msgid "B<kill>(1), B<kill>(2), B<killall>(1), B<nice>(1), B<pkill>(1), B<renice>(1), B<signal>(7)"
msgstr "B<kill>(1), B<kill>(2), B<killall>(1), B<nice>(1), B<pkill>(1), B<renice>(1), B<signal>(7)"
#. type: Plain text
#: ../skill.1:112
msgid "No standards apply."
msgstr "Inga standarder är tillämpliga."
#. type: Plain text
#: ../skill.1:118
msgid "E<.MT albert@users.sf.net> Albert Cahalan E<.ME> wrote skill and snice in 1999 as a replacement for a non-free version."
msgstr "E<.MT albert@users.sf.net> Albert Cahalan E<.ME> skrev skill och snice 1999 som en ersättning för en ofri version."
#. type: TH
#: ../slabtop.1:5
#, no-wrap
msgid "SLABTOP"
msgstr "SLABTOP"
#. type: TH
#: ../slabtop.1:5
#, no-wrap
msgid "June 2011"
msgstr "Juni 2011"
#. type: Plain text
#: ../slabtop.1:8
msgid "slabtop - display kernel slab cache information in real time"
msgstr "slabtop — visa information om kärnans skivcache i realtid"
#. type: Plain text
#: ../slabtop.1:11
msgid "B<slabtop> [I<options>]"
msgstr "B<slabtop> [I<flaggor>]"
#. type: Plain text
#: ../slabtop.1:16
msgid "B<slabtop> displays detailed kernel slab cache information in real time. It displays a listing of the top caches sorted by one of the listed sort criteria. It also displays a statistics header filled with slab layer information."
msgstr "B<slabtop> visar detaljerad information om kärnans skiv-cache i realtid. Det visar en lista över toppskivorna sorterade efter en av de listade sorteringskriterierna. Det visar också ett huvud med statistisk information om skivnivåer."
#. type: Plain text
#: ../slabtop.1:21
msgid "Normal invocation of B<slabtop> does not require any options. The behavior, however, can be fine-tuned by specifying one or more of the following flags:"
msgstr "Normalt anrop av B<slabtop> kräver inte några flaggor. Beteendet kan dock finjusteras genom att ange en eller flera av följande flaggor:"
#. type: TP
#: ../slabtop.1:21
#, no-wrap
msgid "B<-d>, B<--delay>=I<N>"
msgstr "B<-d>, B<--delay>=I<N>"
#. type: Plain text
#: ../slabtop.1:29
msgid "Refresh the display every I<n> in seconds. By default, B<slabtop> refreshes the display every three seconds. To exit the program, hit B<q.>"
msgstr "Uppdatera visningen var I<n>:e sekund. Som standard uppdaterar B<slabtop> visningen var tredje sekund. För att avsluta programmet, tryck B<q>."
#. type: TP
#: ../slabtop.1:29
#, no-wrap
msgid "B<-s>, B<--sort>=I<S>"
msgstr "B<-s>, B<--sort>=I<S>"
#. type: Plain text
#: ../slabtop.1:32
msgid "Sort by I<S>, where I<S> is one of the sort criteria."
msgstr "Sortera efter I<S>, där I<S> är ett av sorteringskriterierna."
#. type: TP
#: ../slabtop.1:32
#, no-wrap
msgid "B<-o>, B<--once>"
msgstr "B<-o>, B<--once>"
#. type: Plain text
#: ../slabtop.1:35
msgid "Display the output once and then exit."
msgstr "Visa utdata en gång och avsluta sedan."
#. type: Plain text
#: ../slabtop.1:41
msgid "Display usage information and exit."
msgstr "Visa användningsinformation och avsluta."
#. type: SH
#: ../slabtop.1:41
#, no-wrap
msgid "SORT CRITERIA"
msgstr "SORTERINGSKRITERIER"
#. type: Plain text
#: ../slabtop.1:45
msgid "The following are valid sort criteria used to sort the individual slab caches and thereby determine what are the \"top\" slab caches to display. The default sort criteria is to sort by the number of objects (\"o\")."
msgstr "Följande är giltiga sorteringskriterier som används för att sortera de enskilda skiv-cacharna och därigenom avgöra vilka ”topp”-skiv-cacharna som visas skall vara. Standardsorteringskriteriet är att sortera efter antal objekt (”o”)."
#. type: Plain text
#: ../slabtop.1:49
msgid "The sort criteria can also be changed while B<slabtop> is running by pressing the associated character."
msgstr "Sorteringskriteriet kan även ändras medan B<slabtop> kör genom att trycka den tillhörande bokstaven."
#. type: tbl table
#: ../slabtop.1:51
#, no-wrap
msgid "B<character>"
msgstr "B<tecken>"
#. type: tbl table
#: ../slabtop.1:51
#, no-wrap
msgid "B<description>"
msgstr "B<beskrivning>"
#. type: tbl table
#: ../slabtop.1:51
#, no-wrap
msgid "B<header>"
msgstr "B<huvud>"
#. type: tbl table
#: ../slabtop.1:52
#, no-wrap
msgid "a"
msgstr "a"
#. type: tbl table
#: ../slabtop.1:52
#, no-wrap
msgid "number of active objects"
msgstr "antal aktiva objekt"
#. type: tbl table
#: ../slabtop.1:52
#, no-wrap
msgid "ACTIVE"
msgstr "AKTIVT"
#. type: tbl table
#: ../slabtop.1:53
#, no-wrap
msgid "b"
msgstr "b"
#. type: tbl table
#: ../slabtop.1:53
#, no-wrap
msgid "objects per slab"
msgstr "objekt per skiva"
#. type: tbl table
#: ../slabtop.1:53
#, no-wrap
msgid "OBJ/SLAB"
msgstr "OBJ/SKIVA"
#. type: tbl table
#: ../slabtop.1:54 ../ps/ps.1:910 ../ps/ps.1:1075
#, no-wrap
msgid "c"
msgstr "c"
#. type: tbl table
#: ../slabtop.1:54
#, no-wrap
msgid "cache size"
msgstr "cachestorlek"
#. type: tbl table
#: ../slabtop.1:54
#, no-wrap
msgid "CACHE SIZE"
msgstr "CACHESTORLEK"
#. type: TP
#: ../slabtop.1:55 ../ps/ps.1:883
#, no-wrap
msgid "l"
msgstr "l"
#. type: tbl table
#: ../slabtop.1:55
#, no-wrap
msgid "number of slabs"
msgstr "antal skivor"
#. type: tbl table
#: ../slabtop.1:55
#, no-wrap
msgid "SLABS"
msgstr "SKIVOR"
#. type: tbl table
#: ../slabtop.1:56 ../ps/ps.1:933
#, no-wrap
msgid "v"
msgstr "v"
#. type: tbl table
#: ../slabtop.1:56
#, no-wrap
msgid "number of active slabs"
msgstr "antal aktiva skivor"
#. type: tbl table
#: ../slabtop.1:56 ../slabtop.1:59
#, no-wrap
msgid "N/A"
msgstr "saknas"
#. type: tbl table
#: ../slabtop.1:57 ../ps/ps.1:920
#, no-wrap
msgid "n"
msgstr "n"
#. type: tbl table
#: ../slabtop.1:57
#, no-wrap
msgid "name"
msgstr "namn"
#. type: tbl table
#: ../slabtop.1:57
#, no-wrap
msgid "NAME\\:"
msgstr "NAMN\\:"
#. type: tbl table
#: ../slabtop.1:58 ../ps/ps.1:922
#, no-wrap
msgid "o"
msgstr "o"
#. type: tbl table
#: ../slabtop.1:58
#, no-wrap
msgid "number of objects"
msgstr "antal objekt"
#. type: tbl table
#: ../slabtop.1:58
#, no-wrap
msgid "OBJS"
msgstr "OBJ"
#. type: tbl table
#: ../slabtop.1:59 ../ps/ps.1:923
#, no-wrap
msgid "p"
msgstr "p"
#. type: tbl table
#: ../slabtop.1:59
#, no-wrap
msgid "pages per slab"
msgstr "sidor per skiva"
#. type: tbl table
#: ../slabtop.1:60 ../ps/ps.1:880 ../ps/ps.1:927 ../ps/ps.1:1566
#, no-wrap
msgid "s"
msgstr "s"
#. type: tbl table
#: ../slabtop.1:60
#, no-wrap
msgid "object size"
msgstr "objektstorlek"
#. type: tbl table
#: ../slabtop.1:60
#, no-wrap
msgid "OBJ SIZE"
msgstr "OBJ-STRL"
#. type: tbl table
#: ../slabtop.1:61 ../ps/ps.1:932
#, no-wrap
msgid "u"
msgstr "u"
#. type: tbl table
#: ../slabtop.1:61
#, no-wrap
msgid "cache utilization"
msgstr "cacheanvändning"
#. type: tbl table
#: ../slabtop.1:61
#, no-wrap
msgid "USE"
msgstr "ANV"
#. type: SH
#: ../slabtop.1:63
#, no-wrap
msgid "COMMANDS"
msgstr "KOMMANDON"
#. type: Plain text
#: ../slabtop.1:67
msgid "B<slabtop> accepts keyboard commands from the user during use. The following are supported. In the case of letters, both cases are accepted."
msgstr "B<slabtop> tar emot tangentbordskommandon från användaren under körning. Följande stödjs. Vad gäller bokstäver tas både versaler och gemener emot."
#. type: Plain text
#: ../slabtop.1:71
msgid "Each of the valid sort characters are also accepted, to change the sort routine. See the section B<SORT CRITERIA>."
msgstr "Var och en av de giltiga sorteringskriterierna tas också emot, för att ändra sorteringsrutinen. Se avsnittet B<SORTERINGSKRITERIER>."
#. type: TP
#: ../slabtop.1:71
#, no-wrap
msgid "B<E<lt>SPACEBARE<gt>>"
msgstr "B<E<lt>MELLANSLAGE<gt>>"
#. type: Plain text
#: ../slabtop.1:74
msgid "Refresh the screen."
msgstr "Uppdatera skärmen."
#. type: TP
#: ../slabtop.1:74
#, no-wrap
msgid "B<Q>"
msgstr "B<Q>"
#. type: Plain text
#: ../slabtop.1:77
msgid "Quit the program."
msgstr "Avsluta programmet."
#. type: TP
#: ../slabtop.1:78
#, no-wrap
msgid "I</proc/slabinfo>"
msgstr "I</proc/slabinfo>"
#. type: Plain text
#: ../slabtop.1:81
msgid "slab information"
msgstr "skivinformation"
#. type: Plain text
#: ../slabtop.1:86
msgid "B<free>(1), B<ps>(1), B<top>(1), B<vmstat>(8)"
msgstr "B<free>(1), B<ps>(1), B<top>(1), B<vmstat>(8)"
#. type: Plain text
#: ../slabtop.1:92
msgid "Currently, B<slabtop> requires a 2.4 or later kernel (specifically, a version 1.1 or later I</proc/slabinfo>). Kernel 2.2 should be supported in the future."
msgstr "För närvarande kräver B<slabtop> en kärna 2.4 eller senare (specifikt, version 1.1 eller senare av I</proc/slabinfo>). Kärna 2.2 bör stödjas i framtiden."
#. type: Plain text
#: ../slabtop.1:98
#, fuzzy
#| msgid "The slabtop statistic header is tracking how many bytes of slabs are being used and is not a measure of physical memory. The 'Slab' field in the /proc/meminfo file is tracking information about used slab physical memory."
msgid "The B<slabtop> statistic header is tracking how many bytes of slabs are being used and is not a measure of physical memory. The 'Slab' field in the /proc/meminfo file is tracking information about used slab physical memory."
msgstr "Statistikhuvudet i slabtop följer hur många byte av skivor som används och är inte ett mått på fysiskt minne. Fältet ”Slab” i filen /proc/meminfo följer information om skivors använda fysiska minne."
#. type: SH
#: ../slabtop.1:98 ../tload.1:50 ../uptime.1:46 ../vmstat.8:218 ../w.1:88
#, no-wrap
msgid "AUTHORS"
msgstr "UPPHOVSMÄN"
#. type: Plain text
#: ../slabtop.1:100
msgid "Written by Chris Rivera and Robert Love."
msgstr "Skrivet av Chris Rivera och Robert Love."
#. type: Plain text
#: ../slabtop.1:104
msgid "B<slabtop> was inspired by Martin Bligh's perl script, B<vmtop>."
msgstr "B<slabtop> inspirerades av Martin Blighs perl-skript B<vmtop>."
#. type: TH
#: ../sysctl.8:9
#, no-wrap
msgid "SYSCTL"
msgstr "SYSCTL"
#. type: TH
#: ../sysctl.8:9
#, fuzzy, no-wrap
#| msgid "2018-02-19"
msgid "2020-02-27"
msgstr "2018-02-19"
#. type: TH
#: ../sysctl.8:9 ../vmstat.8:3
#, no-wrap
msgid "System Administration"
msgstr "Systemadministration"
#. type: Plain text
#: ../sysctl.8:12
msgid "sysctl - configure kernel parameters at runtime"
msgstr "sysctl — konfigurera kärnparametrar under gång"
#. type: Plain text
#: ../sysctl.8:15
msgid "B<sysctl> [I<options>] [I<variable>[B<=>I<value>]] [...]"
msgstr "B<sysctl> [I<flaggor>] [I<variabel>[B<=>I<värde>]] […]"
#. type: Plain text
#: ../sysctl.8:18
msgid "B<sysctl -p> [I<file> or I<regexp>] [...]"
msgstr "B<sysctl -p> [I<fil> eller I<reguttr>] […]"
#. type: Plain text
#: ../sysctl.8:26
msgid "B<sysctl> is used to modify kernel parameters at runtime. The parameters available are those listed under /proc/sys/. Procfs is required for B<sysctl> support in Linux. You can use B<sysctl> to both read and write sysctl data."
msgstr "B<sysctl> används för att ändra kärnparametrar under gång. De tillgängliga parametrarna är de som listas under /proc/sys/. Procfs krävs för att stödja B<sysctl> i Linux. Du kan använda B<sysctl> både för att läsa och skriva sysctl-data."
#. type: SH
#: ../sysctl.8:26
#, no-wrap
msgid "PARAMETERS"
msgstr "PARAMETRAR"
#. type: TP
#: ../sysctl.8:27
#, no-wrap
msgid "I<variable>"
msgstr "I<variabel>"
#. type: Plain text
#: ../sysctl.8:31
msgid "The name of a key to read from. An example is kernel.ostype. The '/' separator is also accepted in place of a '.'."
msgstr "Namnet på en nyckel att läsa ifrån. Ett exempel är kernel.ostype. Separatorn ”/” godkänns också istället för en ”.”."
#. type: TP
#: ../sysctl.8:31
#, no-wrap
msgid "I<variable>=I<value>"
msgstr "I<variabel>=I<värde>"
#. type: Plain text
#: ../sysctl.8:42
msgid "To set a key, use the form I<variable>=I<value> where I<variable> is the key and I<value> is the value to set it to. If the value contains quotes or characters which are parsed by the shell, you may need to enclose the value in double quotes."
msgstr "För att sätta en nyckel, använd formen I<variabel>=I<värde> där I<variabel> är nyckeln och I<värde> är värdet att sätta den till. Om värdet innehåller citationstecken eller tecken som tolkas av skalet kan du behöva omge värdet med citationstecken."
#. type: TP
#: ../sysctl.8:42
#, no-wrap
msgid "B<-n>, B<--values>"
msgstr "B<-n>, B<--values>"
#. type: Plain text
#: ../sysctl.8:45
msgid "Use this option to disable printing of the key name when printing values."
msgstr "Använd denna flagga för att slå av utskrift av nyckelnamnet när värden skrivs."
#. type: TP
#: ../sysctl.8:45
#, no-wrap
msgid "B<-e>, B<--ignore>"
msgstr "B<-e>, B<--ignore>"
#. type: Plain text
#: ../sysctl.8:48
msgid "Use this option to ignore errors about unknown keys."
msgstr "Använd denna flagga för att ignorera fel för okända nycklar."
#. type: TP
#: ../sysctl.8:48
#, no-wrap
msgid "B<-N>, B<--names>"
msgstr "B<-N>, B<--names>"
#. type: Plain text
#: ../sysctl.8:52
msgid "Use this option to only print the names. It may be useful with shells that have programmable completion."
msgstr "Använd denna flagga för att bara skriva namnen. Det kan vara användbart med skal som har programmerbar komplettering."
#. type: Plain text
#: ../sysctl.8:55
msgid "Use this option to not display the values set to stdout."
msgstr "Använd denna flagga för att inte visa värdena som sätts på standard ut."
#. type: TP
#: ../sysctl.8:55
#, no-wrap
msgid "B<-w>, B<--write>"
msgstr "B<-w>, B<--write>"
#. type: Plain text
#: ../sysctl.8:58
msgid "Use this option when all arguments prescribe a key to be set."
msgstr "Använd denna flagga när alla argument föreskriver att en nyckel skall sättas."
#. type: TP
#: ../sysctl.8:58
#, no-wrap
msgid "B<-p>[I<FILE>], B<--load>[=I<FILE>]"
msgstr "B<-p>[I<FIL>], B<--load>[=I<FIL>]"
#. type: Plain text
#: ../sysctl.8:66
msgid "Load in sysctl settings from the file specified or /etc/sysctl.conf if none given. Specifying - as filename means reading data from standard input. Using this option will mean arguments to B<sysctl> are files, which are read in the order they are specified. The file argument may be specified as regular expression."
msgstr "Läs in sysctl-inställningar från filen som anges eller /etc/sysctl.conf om ingen anges. Att ange - som ett filnamn betyder att läsa data från standard in. Användning av denna flagga kommer betyda att argument till B<sysctl> är filer, vilka läses i den ordning de anges. Filargumentet kan anges som ett reguljärt uttryck."
#. type: TP
#: ../sysctl.8:66
#, no-wrap
msgid "B<-a>, B<--all>"
msgstr "B<-a>, B<--all>"
#. type: Plain text
#: ../sysctl.8:69
msgid "Display all values currently available."
msgstr "Visa alla värden som för närvarande är tillgängliga."
#. type: TP
#: ../sysctl.8:69
#, no-wrap
msgid "B<--deprecated>"
msgstr "B<--deprecated>"
#. type: Plain text
#: ../sysctl.8:74
msgid "Include deprecated parameters to B<--all> values listing."
msgstr "Inkludera utgående parametrar i värdelistningen med B<--all>."
#. type: TP
#: ../sysctl.8:74
#, no-wrap
msgid "B<-b>, B<--binary>"
msgstr "B<-b>, B<--binary>"
#. type: Plain text
#: ../sysctl.8:77
msgid "Print value without new line."
msgstr "Skriv värdet utan nyrad."
#. type: TP
#: ../sysctl.8:77
#, no-wrap
msgid "B<--system>"
msgstr "B<--system>"
#. type: Plain text
#: ../sysctl.8:83
msgid "Load settings from all system configuration files. Files are read from directories in the following list in given order from top to bottom. Once a file of a given filename is loaded, any file of the same name in subsequent directories is ignored."
msgstr "Läs in inställningar från alla systemkonfigurationsfiler. Filer läses från kataloger i följande lista i den givna ordningen uppifrån och ner. När en fil med ett givet namn är inläst ignoreras eventuella filer med samma namn i följande kataloger."
#. type: Plain text
#: ../sysctl.8:85
msgid "/etc/sysctl.d/*.conf"
msgstr "/etc/sysctl.d/*.conf"
#. type: Plain text
#: ../sysctl.8:87
msgid "/run/sysctl.d/*.conf"
msgstr "/run/sysctl.d/*.conf"
#. type: Plain text
#: ../sysctl.8:89
msgid "/usr/local/lib/sysctl.d/*.conf"
msgstr "/usr/local/lib/sysctl.d/*.conf"
#. type: Plain text
#: ../sysctl.8:91
msgid "/usr/lib/sysctl.d/*.conf"
msgstr "/usr/lib/sysctl.d/*.conf"
#. type: Plain text
#: ../sysctl.8:93
msgid "/lib/sysctl.d/*.conf"
msgstr "/lib/sysctl.d/*.conf"
#. type: Plain text
#: ../sysctl.8:95
msgid "/etc/sysctl.conf"
msgstr "/etc/sysctl.conf"
#. type: TP
#: ../sysctl.8:95
#, no-wrap
msgid "B<-r>, B<--pattern> I<pattern>"
msgstr "B<-r>, B<--pattern> I<mönster>"
#. type: Plain text
#: ../sysctl.8:102
msgid "Only apply settings that match I<pattern>. The I<pattern> uses extended regular expression syntax."
msgstr "Verkställ endast inställningar som matchar I<mönster>. I<Mönstret> använder syntaxen för utökade reguljära uttryck."
#. type: TP
#: ../sysctl.8:102 ../ps/ps.1:160
#, no-wrap
msgid "B<-A>"
msgstr "B<-A>"
#. type: Plain text
#: ../sysctl.8:105 ../sysctl.8:114
msgid "Alias of B<-a>"
msgstr "Alias för B<-a>"
#. type: TP
#: ../sysctl.8:105 ../ps/ps.1:169
#, no-wrap
msgid "B<-d>"
msgstr "B<-d>"
#. type: Plain text
#: ../sysctl.8:108
msgid "Alias of B<-h>"
msgstr "Alias för B<-h>"
#. type: TP
#: ../sysctl.8:108 ../ps/ps.1:431
#, no-wrap
msgid "B<-f>"
msgstr "B<-f>"
#. type: Plain text
#: ../sysctl.8:111
msgid "Alias of B<-p>"
msgstr "Alias för B<-p>"
#. type: TP
#: ../sysctl.8:114
#, no-wrap
msgid "B<-o>"
msgstr "B<-o>"
#. type: Plain text
#: ../sysctl.8:117 ../sysctl.8:120
msgid "Does nothing, exists for BSD compatibility."
msgstr "Gör ingenting, finns för kompatibilitet med BSD."
#. type: TP
#: ../sysctl.8:117
#, no-wrap
msgid "B<-x>"
msgstr "B<-x>"
#. type: Plain text
#: ../sysctl.8:128
msgid "/sbin/sysctl -a"
msgstr "/sbin/sysctl -a"
#. type: Plain text
#: ../sysctl.8:130
msgid "/sbin/sysctl -n kernel.hostname"
msgstr "/sbin/sysctl -n kernel.hostname"
#. type: Plain text
#: ../sysctl.8:132
msgid "/sbin/sysctl -w kernel.domainname=\"example.com\""
msgstr "/sbin/sysctl -w kernel.domainname=\"example.com\""
#. type: Plain text
#: ../sysctl.8:134
msgid "/sbin/sysctl -p/etc/sysctl.conf"
msgstr "/sbin/sysctl -p/etc/sysctl.conf"
#. type: Plain text
#: ../sysctl.8:136
msgid "/sbin/sysctl -a --pattern forward"
msgstr "/sbin/sysctl -a --pattern forward"
#. type: Plain text
#: ../sysctl.8:138
msgid "/sbin/sysctl -a --pattern forward$"
msgstr "/sbin/sysctl -a --pattern forward$"
#. type: Plain text
#: ../sysctl.8:140
msgid "/sbin/sysctl -a --pattern 'net.ipv4.conf.(eth|wlan)0.arp'"
msgstr "/sbin/sysctl -a --pattern 'net.ipv4.conf.(eth|wlan)0.arp'"
#. type: Plain text
#: ../sysctl.8:142
msgid "/sbin/sysctl --system --pattern '^net.ipv6'"
msgstr "/sbin/sysctl --system --pattern '^net.ipv6'"
#. type: SH
#: ../sysctl.8:142
#, no-wrap
msgid "DEPRECATED PARAMETERS"
msgstr "FÖRÅLDRADE PARAMETRAR"
#. type: Plain text
#: ../sysctl.8:152
#, fuzzy
#| msgid "The B<base_reachable_time> and B<retrans_time> are deprecated. The sysctl command does not allow changing values of these parameters. Users who insist to use deprecated kernel interfaces should push values to /proc file system by other means. For example:"
msgid "The B<base_reachable_time> and B<retrans_time> are deprecated. The B<sysctl> command does not allow changing values of these parameters. Users who insist to use deprecated kernel interfaces should push values to /proc file system by other means. For example:"
msgstr "B<base_reachable_time> och B<retrans_time> är föråldrade. Kommandot sysctl tillåter inte ändring av dessa parametrar. Användare som insisterar på att använda föråldrade kärngränssnitt får trycka värdet till filsystemet /proc på annat sätt. Till exempel:"
#. type: Plain text
#: ../sysctl.8:154
msgid "echo 256 E<gt> /proc/sys/net/ipv6/neigh/eth0/base_reachable_time"
msgstr "echo 256 E<gt> /proc/sys/net/ipv6/neigh/eth0/base_reachable_time"
#. type: Plain text
#: ../sysctl.8:156
msgid "I</proc/sys>"
msgstr "I</proc/sys>"
#. type: Plain text
#: ../sysctl.8:158 ../sysctl.conf.5:59
#, fuzzy
#| msgid "/etc/sysctl.d/*.conf"
msgid "I</etc/sysctl.d/*.conf>"
msgstr "/etc/sysctl.d/*.conf"
#. type: Plain text
#: ../sysctl.8:160 ../sysctl.conf.5:61
#, fuzzy
#| msgid "/run/sysctl.d/*.conf"
msgid "I</run/sysctl.d/*.conf>"
msgstr "/run/sysctl.d/*.conf"
#. type: Plain text
#: ../sysctl.8:162 ../sysctl.conf.5:63
#, fuzzy
#| msgid "/usr/local/lib/sysctl.d/*.conf"
msgid "I</usr/local/lib/sysctl.d/*.conf>"
msgstr "/usr/local/lib/sysctl.d/*.conf"
#. type: Plain text
#: ../sysctl.8:164 ../sysctl.conf.5:65
#, fuzzy
#| msgid "/usr/lib/sysctl.d/*.conf"
msgid "I</usr/lib/sysctl.d/*.conf>"
msgstr "/usr/lib/sysctl.d/*.conf"
#. type: Plain text
#: ../sysctl.8:166 ../sysctl.conf.5:67
#, fuzzy
#| msgid "/lib/sysctl.d/*.conf"
msgid "I</lib/sysctl.d/*.conf>"
msgstr "/lib/sysctl.d/*.conf"
#. type: Plain text
#: ../sysctl.8:168 ../sysctl.conf.5:69
msgid "I</etc/sysctl.conf>"
msgstr "I</etc/sysctl.conf>"
#. type: Plain text
#: ../sysctl.8:171
msgid "B<sysctl.conf>(5) B<regex>(7)"
msgstr "B<sysctl.conf>(5) B<regex>(7)"
#. type: Plain text
#: ../sysctl.8:175 ../sysctl.conf.5:82
msgid "E<.UR staikos@0wned.org> George Staikos E<.UE>"
msgstr "E<.UR staikos@0wned.org> George Staikos E<.UE>"
#. type: TH
#: ../sysctl.conf.5:9
#, no-wrap
msgid "SYSCTL.CONF"
msgstr "SYSCTL.CONF"
#. type: TH
#: ../sysctl.conf.5:9
#, no-wrap
msgid "File Formats"
msgstr "Filformat"
#. type: Plain text
#: ../sysctl.conf.5:12
msgid "sysctl.conf - sysctl preload/configuration file"
msgstr "sysctl.conf — förinställnings-/konfigurationsfil till sysctl"
#. type: Plain text
#: ../sysctl.conf.5:17
msgid "B<sysctl.conf> is a simple file containing sysctl values to be read in and set by B<sysctl>. The syntax is simply as follows:"
msgstr "B<sysctl.conf> är en enkel fil som innehåller sysctl-värden att läsas in och sättas av B<sysctl>. Syntaxen är som följer:"
#. type: Plain text
#: ../sysctl.conf.5:23
#, no-wrap
msgid ""
"# comment\n"
"; comment\n"
msgstr ""
"# kommentar\n"
"; kommentar\n"
#. type: Plain text
#: ../sysctl.conf.5:25
#, no-wrap
msgid "token = value\n"
msgstr "symbol = värde\n"
#. type: Plain text
#: ../sysctl.conf.5:31
#, fuzzy
#| msgid "Note that blank lines are ignored, and whitespace before and after a token or value is ignored, although a value can contain whitespace within. Lines which begin with a # or ; are considered comments and ignored."
msgid "Note that blank lines are ignored, and whitespace before and after a token or value is ignored, although a value can contain whitespace within. Lines which begin with a I<#> or I<;> are considered comments and ignored."
msgstr "Observera att tomma rader ignoreras, och blanktecken före och efter en symbol eller ett värde ignoreras, även om ett värde kan innehålla blanktecken inuti. Rader som börjar med en # eller ett ; betraktas som kommentarer och ignoreras."
#. type: Plain text
#: ../sysctl.conf.5:34
msgid "If a line begins with a single -, any attempts to set the value that fail will be ignored."
msgstr "Om en rad börjar med ett ensamt - kommer alla misslyckade försök att sätta värdet ignoreras."
#. type: Plain text
#: ../sysctl.conf.5:44
msgid "As the B</etc/sysctl.conf> file is used to override default kernel parameter values, only a small number of parameters is predefined in the file. Use I</sbin/sysctl\\ -a> or follow B<sysctl>(8) to list all possible parameters. The description of individual parameters can be found in the kernel documentation."
msgstr "Eftersom filen B</etc/sysctl.conf> används för att åsidosätta standardvärden på kärnparametrar är endast ett litet antal parametrar fördefinierade i filen. Använd I</sbin/sysctl\\ -a> eller följ B<sysctl>(8) för att lista alla möjliga parametrar. Beskrivningen av enskilda parametrar finns i kärnans dokumentation."
#. type: SH
#: ../sysctl.conf.5:44
#, no-wrap
msgid "EXAMPLE"
msgstr "EXEMPEL"
#. type: Plain text
#: ../sysctl.conf.5:54
#, no-wrap
msgid ""
"# sysctl.conf sample\n"
"#\n"
" kernel.domainname = example.com\n"
"; this one has a space which will be written to the sysctl!\n"
" kernel.modprobe = /sbin/mod probe\n"
msgstr ""
"# sysctl.conf-exempel\n"
"#\n"
" kernel.domainname = example.com\n"
"; detta värde har ett mellanslag som kommer att skrivas av sysctl!\n"
" kernel.modprobe = /sbin/mod probe\n"
#. type: Plain text
#: ../sysctl.conf.5:76
#, fuzzy
#| msgid "The paths where sysctl preload files usually exist. See also sysctl option I<--system>."
msgid "The paths where B<sysctl> preload files usually exist. See also B<sysctl> option I<--system>."
msgstr "Sökvägarna där förinställningsfiler till sysctl normalt finns. Se även flaggan I<--system> till sysctl."
#. type: Plain text
#: ../sysctl.conf.5:78
msgid "B<sysctl>(8)"
msgstr "B<sysctl>(8)"
#. type: TH
#: ../tload.1:4
#, no-wrap
msgid "TLOAD"
msgstr "TLOAD"
#. type: Plain text
#: ../tload.1:7
msgid "tload - graphic representation of system load average"
msgstr "tload — grafisk representation av systemets genomsnittslast"
#. type: Plain text
#: ../tload.1:10
msgid "B<tload> [I<options>] [I<tty>]"
msgstr "B<tload> [I<flaggor>] [I<tty>]"
#. type: Plain text
#: ../tload.1:17
#, fuzzy
#| msgid "B<tload> prints a graph of the current system load average to the specified I<tty> (or the tty of the tload process if none is specified)."
msgid "B<tload> prints a graph of the current system load average to the specified I<tty> (or the tty of the B<tload> process if none is specified)."
msgstr "B<tload> skriver ut en graf över systemets aktuella genomsnittslast på den angivna I<tty>n (eller tload-processens tty om ingen anges)."
#. type: TP
#: ../tload.1:18
#, no-wrap
msgid "B<-s>, B<--scale> I<number>"
msgstr "B<-s>, B<--scale> I<antal>"
#. type: Plain text
#: ../tload.1:23
msgid "The scale option allows a vertical scale to be specified for the display (in characters between graph ticks); thus, a smaller value represents a larger scale, and vice versa."
msgstr "Flaggan scale gör att en vertikal skala kan anges för visning (i antal tecken mellan steg i grafen); alltså representerar ett mindre värde en större skala och vice versa."
#. type: TP
#: ../tload.1:23
#, no-wrap
msgid "B<-d>, B<--delay> I<seconds>"
msgstr "B<-d>, B<--delay> I<sekunder>"
#. type: Plain text
#: ../tload.1:27
msgid "The delay sets the delay between graph updates in I<seconds>."
msgstr "Fördröjningen anger väntetiden mellan uppdateringar av grafen i I<sekunder>."
#. type: Plain text
#: ../tload.1:30
msgid "Display this help text."
msgstr "Visa denna hjälptext."
#. type: Plain text
#: ../tload.1:37
msgid "I</proc/loadavg> load average information"
msgstr "I</proc/loadavg> information om genomsnittslast"
#. type: Plain text
#: ../tload.1:42
msgid "B<ps>(1), B<top>(1), B<uptime>(1), B<w>(1)"
msgstr "B<ps>(1), B<top>(1), B<uptime>(1), B<w>(1)"
#. type: Plain text
#: ../tload.1:50
msgid "The B<-d>I< delay> option sets the time argument for an B<alarm>(2); if -d 0 is specified, the alarm is set to 0, which will never send the B<SIGALRM> and update the display."
msgstr "Flaggan B<-d>I< fördröjning> anger tidsargumentet för ett anrop av B<alarm>(2); om -d 0 anges är larmet satt till 0, vilket aldrig kommer skicka någon B<SIGALRM> och uppdatera visningen."
#. type: Plain text
#: ../tload.1:58
msgid "Branko Lankester, E<.UR david@\\:ods.\\:com> David Engel E<.UE , and> E<.UR johnsonm@\\:redhat.\\:com> Michael K. Johnson E<.UE .>"
msgstr "Branko Lankester, E<.UR david@\\:ods.\\:com> David Engel E<.UE och> E<.UR johnsonm@\\:redhat.\\:com> Michael K. Johnson E<.UE .>"
#. type: TH
#: ../uptime.1:3
#, no-wrap
msgid "UPTIME"
msgstr "UPTIME"
#. type: TH
#: ../uptime.1:3
#, no-wrap
msgid "December 2012"
msgstr "December 2012"
#. type: Plain text
#: ../uptime.1:6
msgid "uptime - Tell how long the system has been running."
msgstr "uptime — Berätta hur länge systemet har kört."
#. type: Plain text
#: ../uptime.1:9
msgid "B<uptime> [I<options>]"
msgstr "B<uptime> [I<flaggor>]"
#. type: Plain text
#: ../uptime.1:14
msgid "B<uptime> gives a one line display of the following information. The current time, how long the system has been running, how many users are currently logged on, and the system load averages for the past 1, 5, and 15 minutes."
msgstr "B<uptime> visar en rad med följande information. Den aktuella tiden, hur länge systemet har kört, hur många användare som för tillfället är inloggade och systemets genomsnittslast under de senaste 1, 5 och 15 minuterna."
#. type: Plain text
#: ../uptime.1:17
msgid "This is the same information contained in the header line displayed by B<w>(1)."
msgstr "Detta är samma information som finns i huvudraden som visas av B<w>(1)."
#. type: Plain text
#: ../uptime.1:26
msgid "System load averages is the average number of processes that are either in a runnable or uninterruptable state. A process in a runnable state is either using the CPU or waiting to use the CPU. A process in uninterruptable state is waiting for some I/O access, eg waiting for disk. The averages are taken over the three time intervals. Load averages are not normalized for the number of CPUs in a system, so a load average of 1 means a single CPU system is loaded all the time while on a 4 CPU system it means it was idle 75% of the time."
msgstr "Systemets genomsnittslast är det genomsnittliga antalet processer som antingen är i körbart eller ej avbrytbart tillstånd. En process i körbart tillstånd använder antingen CPU:n eller väntar på att använda CPU:n. En process i ej avbrytbart tillstånd väntar på någon I/O-åtkomst, t.ex. väntar på disk. Genomsnitten tas över de tre tidsintervallen. Lastgenomsnitt är inte normaliserade för antalet CPU:er i ett system, så en genomsnittslast på 1 betyder att ett system med en ensam CPU är belastat hela tiden medan på ett system med 4 CPU:er betyder det att det var inaktivt 75 % av tiden."
#. type: TP
#: ../uptime.1:27
#, no-wrap
msgid "B<-p>, B<--pretty>"
msgstr "B<-p>, B<--pretty>"
#. type: Plain text
#: ../uptime.1:30
msgid "show uptime in pretty format"
msgstr "visa uppetiden i ett snyggt format"
#. type: Plain text
#: ../uptime.1:33
msgid "display this help text"
msgstr "visa denna hjälptext"
#. type: TP
#: ../uptime.1:33
#, no-wrap
msgid "B<-s>, B<--since>"
msgstr "B<-s>, B<--since>"
#. type: Plain text
#: ../uptime.1:36
msgid "system up since, in yyyy-mm-dd HH:MM:SS format"
msgstr "systemet är uppe sedan, på formatet åååå-mm-dd HH:MM:SS"
#. type: Plain text
#: ../uptime.1:39
msgid "display version information and exit"
msgstr "visa versionsinformation och avsluta"
#. type: TP
#: ../uptime.1:40 ../w.1:75
#, no-wrap
msgid "I</var/run/utmp>"
msgstr "I</var/run/utmp>"
#. type: Plain text
#: ../uptime.1:43 ../w.1:78
msgid "information about who is currently logged on"
msgstr "information om vem som är inloggad för närvarande"
#. type: TP
#: ../uptime.1:43 ../w.1:78
#, no-wrap
msgid "I</proc>"
msgstr "I</proc>"
#. type: Plain text
#: ../uptime.1:46 ../w.1:81
msgid "process information"
msgstr "processinformation"
#. type: Plain text
#: ../uptime.1:56
msgid "B<uptime> was written by E<.UR greenfie@gauss.\\:rutgers.\\:edu> Larry Greenfield E<.UE> and E<.UR johnsonm@sunsite.\\:unc.\\:edu> Michael K. Johnson E<.UE>"
msgstr "B<uptime> skrevs av E<.UR greenfie@gauss.\\:rutgers.\\:edu> Larry Greenfield E<.UEf> och E<.UR johnsonm@sunsite.\\:unc.\\:edu> Michael K. Johnson E<.UE>"
#. type: Plain text
#: ../uptime.1:61
msgid "B<ps>(1), B<top>(1), B<utmp>(5), B<w>(1)"
msgstr "B<ps>(1), B<top>(1), B<utmp>(5), B<w>(1)"
#. type: TH
#: ../vmstat.8:3
#, no-wrap
msgid "VMSTAT"
msgstr "VMSTAT"
#. type: Plain text
#: ../vmstat.8:6
msgid "vmstat - Report virtual memory statistics"
msgstr "vmstat — Rapportera statistik över virtuellt minne"
#. type: Plain text
#: ../vmstat.8:10
msgid "B<vmstat> [options] [I<delay> [I<count>]]"
msgstr "B<vmstat> [flaggor] [I<fördröjning> [I<antal>]]"
#. type: Plain text
#: ../vmstat.8:14
msgid "B<vmstat> reports information about processes, memory, paging, block IO, traps, disks and cpu activity."
msgstr "B<vmstat> rapporterar information om processer, minne, sidväxling, block-I/O, fällor, disk- och cpu-aktivitet."
#. type: Plain text
#: ../vmstat.8:19
msgid "The first report produced gives averages since the last reboot. Additional reports give information on a sampling period of length I<delay>. The process and memory reports are instantaneous in either case."
msgstr "Den första producerade rapporten ger genomsnitt sedan senaste omstarten. Följande rapporter ger information om en samplingsperiod med längden I<fördröjning>. Process- och minnesrapporterna är ögonblickliga i båda fallen."
#. type: TP
#: ../vmstat.8:20
#, no-wrap
msgid "I<delay>"
msgstr "I<fördröjning>"
#. type: Plain text
#: ../vmstat.8:27
msgid "The I<delay> between updates in seconds. If no I<delay> is specified, only one report is printed with the average values since boot."
msgstr "I<Fördröjningen> mellan uppdateringar i sekunder. Om ingen I<fördröjning> anges skrivs endast en rapport med genomsnittsvärdena sedan start."
#. type: TP
#: ../vmstat.8:27
#, no-wrap
msgid "I<count>"
msgstr "I<antal>"
#. type: Plain text
#: ../vmstat.8:34
msgid "Number of updates. In absence of I<count>, when I<delay> is defined, default is infinite."
msgstr "Antal uppdateringar. I avsaknad av I<antal>, när I<fördröjning> är definierad, är standardvärdet oändligt."
#. type: TP
#: ../vmstat.8:34
#, no-wrap
msgid "B<-a>, B<--active>"
msgstr "B<-a>, B<--active>"
#. type: Plain text
#: ../vmstat.8:37
msgid "Display active and inactive memory, given a 2.5.41 kernel or better."
msgstr "Visa aktivt och inaktivt minne, förutsatt en kärna 2.5.41 eller bättre."
#. type: TP
#: ../vmstat.8:37
#, no-wrap
msgid "B<-f>, B<--forks>"
msgstr "B<-f>, B<--forks>"
#. type: Plain text
#: ../vmstat.8:45
msgid "The B<-f> switch displays the number of forks since boot. This includes the fork, vfork, and clone system calls, and is equivalent to the total number of tasks created. Each process is represented by one or more tasks, depending on thread usage. This display does not repeat."
msgstr "Flaggan B<-f> visar antalet avgreningar sedan start. Detta inkluderar systemanropen fork, vfork och clone, och är likvärdigt med antalet skapade uppgifter. Varje process representeras av en eller flera uppgifter, beroende på trådanvändning. Denna visning uppdateras inte."
#. type: TP
#: ../vmstat.8:45
#, no-wrap
msgid "B<-m>, B<--slabs>"
msgstr "B<-m>, B<--slabs>"
#. type: Plain text
#: ../vmstat.8:48
msgid "Displays slabinfo."
msgstr "Visa skivinformation."
#. type: TP
#: ../vmstat.8:48
#, no-wrap
msgid "B<-n>, B<--one-header>"
msgstr "B<-n>, B<--one-header>"
#. type: Plain text
#: ../vmstat.8:51
msgid "Display the header only once rather than periodically."
msgstr "Visa endast huvudet en gång istället för periodiskt."
#. type: TP
#: ../vmstat.8:51
#, no-wrap
msgid "B<-s>, B<--stats>"
msgstr "B<-s>, B<--stats>"
#. type: Plain text
#: ../vmstat.8:55
msgid "Displays a table of various event counters and memory statistics. This display does not repeat."
msgstr "Visar en tabell över olika händelseräknare och minnesstatistik. Denna visning upprepas inte."
#. type: TP
#: ../vmstat.8:55
#, no-wrap
msgid "B<-d>, B<--disk>"
msgstr "B<-d>, B<--disk>"
#. type: Plain text
#: ../vmstat.8:58
msgid "Report disk statistics (2.5.70 or above required)."
msgstr "Rapportera diskstatistik (2.5.70 eller senare krävs)."
#. type: TP
#: ../vmstat.8:58
#, no-wrap
msgid "B<-D>, B<--disk-sum>"
msgstr "B<-D>, B<--disk-sum>"
#. type: Plain text
#: ../vmstat.8:61
msgid "Report some summary statistics about disk activity."
msgstr "Rapportera en del sammanfattande statistik om diskaktivitet."
#. type: TP
#: ../vmstat.8:61
#, no-wrap
msgid "B<-p>, B<--partition> I<device>"
msgstr "B<-p>, B<--partition> I<enhet>"
#. type: Plain text
#: ../vmstat.8:64
msgid "Detailed statistics about partition (2.5.70 or above required)."
msgstr "Detaljerad statistik om partitioner (2.5.70 eller senare krävs)."
#. type: TP
#: ../vmstat.8:64
#, no-wrap
msgid "B<-S>, B<--unit> I<character>"
msgstr "B<-S>, B<--unit> I<tecken>"
#. type: Plain text
#: ../vmstat.8:76
msgid "Switches outputs between 1000 (I<k>), 1024 (I<K>), 1000000 (I<m>), or 1048576 (I<M>) bytes. Note this does not change the block (bi/bo) fields, which are always measured in blocks."
msgstr "Byter utmatning mellan 1000 (I<k>), 1024 (I<K>), 1000000 (I<m>) eller 1048576 (I<M>) byte. Observera att detta inte ändrar fälten för block (bi/bu), som alltid mäts i block."
#. type: TP
#: ../vmstat.8:76
#, no-wrap
msgid "B<-t>, B<--timestamp>"
msgstr "B<-t>, B<--timestamp>"
#. type: Plain text
#: ../vmstat.8:79
msgid "Append timestamp to each line"
msgstr "Lägg till en tidsstämpel till varje rad"
#. type: Plain text
#: ../vmstat.8:84
msgid "Wide output mode (useful for systems with higher amount of memory, where the default output mode suffers from unwanted column breakage). The output is wider than 80 characters per line."
msgstr "Brett utmatningsläge (användbart för system med större mängder minne, där standardläget för utmatning drabbas av oönskade trasiga kolumner). Utmatningen är bredare än 80 tecken per rad."
#. type: SH
#: ../vmstat.8:91
#, no-wrap
msgid "FIELD DESCRIPTION FOR VM MODE"
msgstr "FÄLTBESKRIVNING FÖR VM-LÄGET"
#. type: SS
#: ../vmstat.8:92
#, no-wrap
msgid "Procs"
msgstr "Procs"
#. type: Plain text
#: ../vmstat.8:97
#, fuzzy, no-wrap
#| msgid ""
#| "r: The number of runnable processes (running or waiting for run time).\n"
#| "b: The number of processes in uninterruptible sleep.\n"
msgid ""
"r: The number of runnable processes (running or waiting for run time).\n"
"b: The number of processes blocked waiting for I/O to complete.\n"
msgstr ""
"k: Antalet körbara processer (körande eller väntande på körtid).\n"
"b: Antalet processer i ej avbrytbar vila.\n"
#. type: SS
#: ../vmstat.8:99
#, no-wrap
msgid "Memory"
msgstr "Minne"
#. type: Plain text
#: ../vmstat.8:102 ../vmstat.8:114
#, fuzzy
#| msgid "These are affected by the --unit option."
msgid "These are affected by the B<--unit> option."
msgstr "Dessa påverkas av flaggan --unit."
#. type: Plain text
#: ../vmstat.8:109
#, fuzzy, no-wrap
#| msgid ""
#| "swpd: the amount of virtual memory used.\n"
#| "free: the amount of idle memory.\n"
#| "buff: the amount of memory used as buffers.\n"
#| "cache: the amount of memory used as cache.\n"
#| "inact: the amount of inactive memory. (-a option)\n"
#| "active: the amount of active memory. (-a option)\n"
msgid ""
"swpd: the amount of swap memory used.\n"
"free: the amount of idle memory.\n"
"buff: the amount of memory used as buffers.\n"
"cache: the amount of memory used as cache.\n"
"inact: the amount of inactive memory. (B<-a> option)\n"
"active: the amount of active memory. (B<-a> option)\n"
msgstr ""
"växl: mängden använt virtuellt minne.\n"
"fritt: mängden oanvänt minne.\n"
"buff: mängden minne använt som buffertar.\n"
"cache: mängden minne använt som cache.\n"
"inakt: mängden inaktivt minne. (flaggan -a)\n"
"aktivt: mängden aktivt minne. (flaggan -a)\n"
#. type: SS
#: ../vmstat.8:111
#, no-wrap
msgid "Swap"
msgstr "Växling"
#. type: Plain text
#: ../vmstat.8:117
#, no-wrap
msgid ""
"si: Amount of memory swapped in from disk (/s).\n"
"so: Amount of memory swapped to disk (/s).\n"
msgstr ""
"vi: Mängden minne växlat in från disk (/s).\n"
"vu: Mängden minne växlat ut till disk (/s).\n"
#. type: SS
#: ../vmstat.8:119 ../vmstat.8:163
#, no-wrap
msgid "IO"
msgstr "IO"
#. type: Plain text
#: ../vmstat.8:124
#, no-wrap
msgid ""
"bi: Blocks received from a block device (blocks/s).\n"
"bo: Blocks sent to a block device (blocks/s).\n"
msgstr ""
"bi: Block mottagna från en blockenhet (block/s).\n"
"bu: Block skickade till en blockenhet (block/s).\n"
#. type: SS
#: ../vmstat.8:126
#, no-wrap
msgid "System"
msgstr "System"
#. type: Plain text
#: ../vmstat.8:131
#, no-wrap
msgid ""
"in: The number of interrupts per second, including the clock.\n"
"cs: The number of context switches per second.\n"
msgstr ""
"avb: Antalet avbrott per sekund, inklusive klockan.\n"
"ktxb: Antalet kontextbyten per sekund.\n"
#. type: ds PU
#: ../vmstat.8:133 ../top/top.1:41
#, no-wrap
msgid "CPU"
msgstr "CPU"
#. type: Plain text
#: ../vmstat.8:136
msgid "These are percentages of total CPU time."
msgstr "Detta är procentandelar av total CPU-tid."
#. type: Plain text
#: ../vmstat.8:142
#, no-wrap
msgid ""
"us: Time spent running non-kernel code. (user time, including nice time)\n"
"sy: Time spent running kernel code. (system time)\n"
"id: Time spent idle. Prior to Linux 2.5.41, this includes IO-wait time.\n"
"wa: Time spent waiting for IO. Prior to Linux 2.5.41, included in idle.\n"
"st: Time stolen from a virtual machine. Prior to Linux 2.6.11, unknown.\n"
msgstr ""
"an: Tid tillbringad att köra icke-kärnkod. (användartid, inklusive nice-tid)\n"
"sy: Tid tillbringad att köra kärnkod. (systemtid)\n"
"in: Tid tillbringad inaktiv. Före Linux 2.5.41 inkluderar detta IO-väntetid.\n"
"vä: Tid tillbringad väntande på IO. Före Linux 2.5.41 inkluderat i inaktiv.\n"
"st: Tid stulen från en virtuell maskin. Före Linux 2.6.11, okänd.\n"
#. type: SH
#: ../vmstat.8:144
#, no-wrap
msgid "FIELD DESCRIPTION FOR DISK MODE"
msgstr "FÄLTBESKRIVNING FÖR DISK-LÄGET"
#. type: SS
#: ../vmstat.8:145
#, no-wrap
msgid "Reads"
msgstr "Läsningar"
#. type: Plain text
#: ../vmstat.8:152
#, no-wrap
msgid ""
"total: Total reads completed successfully\n"
"merged: grouped reads (resulting in one I/O)\n"
"sectors: Sectors read successfully\n"
"ms: milliseconds spent reading\n"
msgstr ""
"totalt: Totalt avslutade lyckade läsningar\n"
"grupp: grupperade läsningar (resulterar i en I/O)\n"
"sektor: Sektorer lyckat lästa\n"
"ms: millisekunder tillbringat med läsningar\n"
#. type: SS
#: ../vmstat.8:154
#, no-wrap
msgid "Writes"
msgstr "Skrivningar"
#. type: Plain text
#: ../vmstat.8:161
#, no-wrap
msgid ""
"total: Total writes completed successfully\n"
"merged: grouped writes (resulting in one I/O)\n"
"sectors: Sectors written successfully\n"
"ms: milliseconds spent writing\n"
msgstr ""
"totalt: Totalt avslutade lyckade skrivningar\n"
"grupp: grupperade skrivningar (resulterar i en I/O)\n"
"sektor: Sektorer lyckat skrivna\n"
"ms: millisekunder tillbringat med skrivningar\n"
#. type: Plain text
#: ../vmstat.8:168
#, no-wrap
msgid ""
"cur: I/O in progress\n"
"s: seconds spent for I/O\n"
msgstr ""
"akt: pågående I/O\n"
"s: sekunder tillbringat i I/O\n"
#. type: SH
#: ../vmstat.8:170
#, no-wrap
msgid "FIELD DESCRIPTION FOR DISK PARTITION MODE"
msgstr "FÄLTBESKRIVNING FÖR DISKPARTITIONSLÄGET"
#. type: Plain text
#: ../vmstat.8:176
#, no-wrap
msgid ""
"reads: Total number of reads issued to this partition\n"
"read sectors: Total read sectors for partition\n"
"writes : Total number of writes issued to this partition\n"
"requested writes: Total number of write requests made for partition\n"
msgstr ""
"läsningar: Totalt antal läsningar skickade till denna partition\n"
"lästa sektorer: Totalt lästa sektorer från partitionen\n"
"skrivningr: Totalt antal skrivningar skickade till denna partition\n"
"beg skrivn: Totalt antal skrivbegäranden gjorda för partitionen\n"
#. type: SH
#: ../vmstat.8:178
#, no-wrap
msgid "FIELD DESCRIPTION FOR SLAB MODE"
msgstr "FÄLTBESKRIVNING FÖR SKIVLÄGET"
#. type: Plain text
#: ../vmstat.8:185
#, no-wrap
msgid ""
"cache: Cache name\n"
"num: Number of currently active objects\n"
"total: Total number of available objects\n"
"size: Size of each object\n"
"pages: Number of pages with at least one active object\n"
msgstr ""
"cache: Cachenamn\n"
"antal: Antal för närvarande aktiva objekt\n"
"totalt: Totalt antal tillgängliga objekt\n"
"strlk: Storlek på varje objekt\n"
"sidor: Antal sidor med åtminstone ett aktivt objekt\n"
#. type: Plain text
#: ../vmstat.8:189
#, fuzzy
#| msgid "B<vmstat > does not require special permissions."
msgid "B<vmstat> does not require special permissions."
msgstr "B<vmstat> behöver inte särskilda rättigheter."
#. type: Plain text
#: ../vmstat.8:193
msgid "These reports are intended to help identify system bottlenecks. Linux B<vmstat> does not count itself as a running process."
msgstr "Dessa rapporter är avsedda att hjälpa till att hitta flaskhalsar i systemet. Linux B<vmstat> räknar inte sig själv som en körande process."
#. type: Plain text
#: ../vmstat.8:196
msgid "All linux blocks are currently 1024 bytes. Old kernels may report blocks as 512 bytes, 2048 bytes, or 4096 bytes."
msgstr "Alla linuxblock är för närvarande 1024 byte. Gamla kärnor kan rapportera block som 512 byte, 2048 byte eller 4096 byte."
#. type: Plain text
#: ../vmstat.8:199
msgid "Since procps 3.1.9, vmstat lets you choose units (k, K, m, M). Default is K (1024 bytes) in the default mode."
msgstr "Sedan procps 3.1.9 låter vmstat dig välja enheter (k, K, m, M). Standard är K (1024 byte) i standardläget."
#. type: Plain text
#: ../vmstat.8:201
msgid "vmstat uses slabinfo 1.1"
msgstr "vmstat använder slabinfo 1.1"
#. type: Plain text
#: ../vmstat.8:207
#, no-wrap
msgid ""
"/proc/meminfo\n"
"/proc/stat\n"
"/proc/*/stat\n"
msgstr ""
"/proc/meminfo\n"
"/proc/stat\n"
"/proc/*/stat\n"
#. type: Plain text
#: ../vmstat.8:215
msgid "B<free>(1), B<iostat>(1), B<mpstat>(1), B<ps>(1), B<sar>(1), B<top>(1)"
msgstr "B<free>(1), B<iostat>(1), B<mpstat>(1), B<ps>(1), B<sar>(1), B<top>(1)"
#. type: Plain text
#: ../vmstat.8:218
msgid "Does not tabulate the block io per device or count the number of system calls."
msgstr "Tabellerar inte block-io per enhet eller antalet systemanrop."
#. type: Plain text
#: ../vmstat.8:223
msgid "Written by E<.UR al172@yfn.\\:ysu.\\:edu> Henry Ware E<.UE .>"
msgstr "Skriven av E<.UR al172@yfn.\\:ysu.\\:edu> Henry Ware E<.UE .>"
#. type: Plain text
#: ../vmstat.8:228
msgid "E<.UR ffrederick@users.\\:sourceforge.\\:net> Fabian Fr\\('ed\\('erick E<.UE> (diskstat, slab, partitions...)"
msgstr "E<.UR ffrederick@users.\\:sourceforge.\\:net> Fabian Fr\\('ed\\('erick E<.UE> (diskstat, slab, partitions…)"
#. type: TP
#: ../w.1:3 ../ps/ps.1:853
#, no-wrap
msgid "W"
msgstr "W"
#. type: Plain text
#: ../w.1:6
msgid "w - Show who is logged on and what they are doing."
msgstr "w — Visa vem som är inloggad och vad de gör."
#. type: Plain text
#: ../w.1:9
msgid "B<w> [I<options>] I<user> [...]"
msgstr "B<w> [I<flaggor>] I<användare> […]"
#. type: Plain text
#: ../w.1:15
msgid "B<w> displays information about the users currently on the machine, and their processes. The header shows, in this order, the current time, how long the system has been running, how many users are currently logged on, and the system load averages for the past 1, 5, and 15 minutes."
msgstr "B<w> visar information om de användare som för närvarande är inloggade på maskinen, och deras processer. Huvudet visar, i denna ordning, aktuell tid, hur länge systemet har kört, hur många användare som för närvarande är inloggade och systemets lastgenomsnitt de senaste 1, 5 och 15 minuterna."
#. type: Plain text
#: ../w.1:19
msgid "The following entries are displayed for each user: login name, the tty name, the remote host, login time, idle time, JCPU, PCPU, and the command line of their current process."
msgstr "Följande poster visas för varje användare: inloggningsnamn, tty-namnet, fjärrvärden, inloggningstid, inaktiv tid, JCPU, PCPU och kommandoraden för deras aktuella process."
#. type: Plain text
#: ../w.1:23
msgid "The JCPU time is the time used by all processes attached to the tty. It does not include past background jobs, but does include currently running background jobs."
msgstr "JCPU-tiden är tiden som använts av alla processer kopplade till tty:n. Det inkluderar inte tidigare bakgrundsjobb, men det inkluderar de för närvarande körande bakgrundsjobben."
#. type: Plain text
#: ../w.1:26
msgid "The PCPU time is the time used by the current process, named in the \"what\" field."
msgstr "PCPU-tiden är tiden som används av den aktuella processen, med namnet i ”vad”-fältet."
#. type: SH
#: ../w.1:26
#, no-wrap
msgid "COMMAND-LINE OPTIONS"
msgstr "KOMMANDORADSFLAGGOR"
#. type: TP
#: ../w.1:27
#, no-wrap
msgid "B<-h>, B<--no-header>"
msgstr "B<-h>, B<--no-header>"
#. type: Plain text
#: ../w.1:30
msgid "Don't print the header."
msgstr "Skriv inte ut huvudet."
#. type: TP
#: ../w.1:30
#, no-wrap
msgid "B<-u>, B<--no-current>"
msgstr "B<-u>, B<--no-current>"
#. type: Plain text
#: ../w.1:39
#, fuzzy
#| msgid "Ignores the username while figuring out the current process and cpu times. To demonstrate this, do a \"su\" and do a \"w\" and a \"w -u\"."
msgid "Ignores the username while figuring out the current process and cpu times. To demonstrate this, do a B<su> and do a B<w> and a B<w -u>."
msgstr "Ignorerar användarnamnet när programmet listar ut den aktuella processen och cpu-tider. För att demonstrera detta, gör ”su” och gör ”w” och ”w -u”."
#. type: TP
#: ../w.1:39
#, no-wrap
msgid "B<-s>, B<--short>"
msgstr "B<-s>, B<--short>"
#. type: Plain text
#: ../w.1:42
msgid "Use the short format. Don't print the login time, JCPU or PCPU times."
msgstr "Använd kort format. Skriv inte ut inloggningstid, JCPU- eller PCPU-tider."
#. type: TP
#: ../w.1:42
#, no-wrap
msgid "B<-f>, B<--from>"
msgstr "B<-f>, B<--from>"
#. type: Plain text
#: ../w.1:52
msgid "Toggle printing the B<from> (remote hostname) field. The default as released is for the B<from> field to not be printed, although your system administrator or distribution maintainer may have compiled a version in which the B<from> field is shown by default."
msgstr "Växla utskriften av fältet B<från> (fjärrvärdsnamn). Standard i utgåvan är att fältet B<från> inte visas, men din systemadministratör eller distributionsansvarige kan ha kompilerat en version i vilken fältet B<från> visas som standard."
#. type: TP
#: ../w.1:55
#, no-wrap
msgid "B<-i>, B<--ip-addr>"
msgstr "B<-i>, B<--ip-addr>"
#. type: Plain text
#: ../w.1:58
msgid "Display IP address instead of hostname for B<from> field."
msgstr "Visa IP-adress istället för värdnamn i fältet B<från>."
#. type: TP
#: ../w.1:61
#, no-wrap
msgid "B<-o>, B<--old-style>"
msgstr "B<-o>, B<--old-style>"
#. type: Plain text
#: ../w.1:64
msgid "Old style output. Prints blank space for idle times less than one minute."
msgstr "Gammaldags utmatning. Skriver mellanslag för inaktiva tider mindre än en minut."
#. type: TP
#: ../w.1:64
#, no-wrap
msgid "B<user >"
msgstr "B<användare >"
#. type: Plain text
#: ../w.1:67
msgid "Show information about the specified user only."
msgstr "Visa endast information om den angivna användaren."
#. type: SH
#: ../w.1:67 ../watch.1:109
#, no-wrap
msgid "ENVIRONMENT"
msgstr "MILJÖ"
#. type: TP
#: ../w.1:68
#, no-wrap
msgid "PROCPS_USERLEN"
msgstr "PROCPS_USERLEN"
#. type: Plain text
#: ../w.1:71
msgid "Override the default width of the username column. Defaults to 8."
msgstr "Åsidosätt standardbredden på kolumnen för användarnamn. Standard är 8."
#. type: TP
#: ../w.1:71
#, no-wrap
msgid "PROCPS_FROMLEN"
msgstr "PROCPS_FROMLEN"
#. type: Plain text
#: ../w.1:74
msgid "Override the default width of the from column. Defaults to 16."
msgstr "Åsidosätt standardbredden på kolumnen från. Standard är 16."
#. type: Plain text
#: ../w.1:88
msgid "B<free>(1), B<ps>(1), B<top>(1), B<uptime>(1), B<utmp>(5), B<who>(1)"
msgstr "B<free>(1), B<ps>(1), B<top>(1), B<uptime>(1), B<utmp>(5), B<who>(1)"
#. type: Plain text
#: ../w.1:98
msgid "B<w> was re-written almost entirely by Charles Blake, based on the version by E<.UR greenfie@\\:gauss.\\:rutgers.\\:edu> Larry Greenfield E<.UE> and E<.UR johnsonm@\\:redhat.\\:com> Michael K. Johnson E<.UE>"
msgstr "B<w> skrevs om nästan fullständigt av Charles Blake, baserat på versionen av E<.UR greenfie@\\:gauss.\\:rutgers.\\:edu> Larry Greenfield E<.UE> och E<.UR johnsonm@\\:redhat.\\:com> Michael K. Johnson E<.UE>"
#. type: TH
#: ../watch.1:1
#, no-wrap
msgid "WATCH"
msgstr "WATCH"
#. type: TH
#: ../watch.1:1
#, no-wrap
msgid "2020-12-06"
msgstr "2020-12-06"
#. type: Plain text
#: ../watch.1:4
msgid "watch - execute a program periodically, showing output fullscreen"
msgstr "watch — kör ett program periodiskt och visa utdata i helskärm"
#. type: Plain text
#: ../watch.1:7
msgid "B<watch> [I<options>] I<command>"
msgstr "B<watch> [I<flaggor>] I<kommando>"
#. type: Plain text
#: ../watch.1:14
msgid "B<watch> runs I<command> repeatedly, displaying its output and errors (the first screenfull). This allows you to watch the program output change over time. By default, I<command> is run every 2 seconds and B<watch> will run until interrupted."
msgstr "B<watch> kör I<kommando> upprepade gånger, och visar dess utmatning och fel (den första skärmen). Detta gör att du kan se programmets utdata ändras över tiden. Som standard körs I<kommando> varannan sekund och B<watch> körs tills det avbryts."
#. type: TP
#: ../watch.1:15
#, fuzzy, no-wrap
#| msgid "B<-d>, B<--differences> [I<permanent>]"
msgid "B<-d>, B<--differences>[=I<permanent>]"
msgstr "B<-d>, B<--differences> [I<permanent>]"
#. type: Plain text
#: ../watch.1:21
#, fuzzy
#| msgid "Highlight the differences between successive updates. Option will read optional argument that changes highlight to be permanent, allowing to see what has changed at least once since first iteration."
msgid "Highlight the differences between successive updates. If the optional I<permanent> argument is specified then B<watch> will show all changes since the first iteration."
msgstr "Markera skillnaderna mellan påföljande uppdateringar. Flaggan kommer läsa ett valfritt argument som ändrar markeringen till att vara permanent, vilket gör att man kan se vad som har ändrats åtminstone en gång sedan den första iterationen."
#. type: TP
#: ../watch.1:21
#, no-wrap
msgid "B<-n>, B<--interval> I<seconds>"
msgstr "B<-n>, B<--interval> I<sekunder>"
#. type: Plain text
#: ../watch.1:27
#, fuzzy
#| msgid "Specify update interval. The command will not allow quicker than 0.1 second interval, in which the smaller values are converted. Both '.' and ',' work for any locales."
msgid "Specify update interval. The command will not allow quicker than 0.1 second interval, in which the smaller values are converted. Both '.' and ',' work for any locales. The WATCH_INTERVAL environment can be used to persistently set a non-default interval (following the same rules and formatting)."
msgstr "Ange uppdateringsintervall. Kommandot kommer inte tillåta snabbare uppdateringar än 0,1 sekunders intervall, då mindre värden kommer konverteras. Både ”.” och ”,” fungerar för alla lokaler."
#. type: TP
#: ../watch.1:27
#, no-wrap
msgid "B<-p>, B<--precise>"
msgstr "B<-p>, B<--precise>"
#. type: Plain text
#: ../watch.1:40
#, fuzzy
#| msgid "Make B<watch> attempt to run I<command> every I<interval> seconds. Try it with B<ntptime> and notice how the fractional seconds stays (nearly) the same, as opposed to normal mode where they continuously increase."
msgid "Make B<watch> attempt to run I<command> every B<--interval> I<seconds>. Try it with B<ntptime> (if present) and notice how the fractional seconds stays (nearly) the same, as opposed to normal mode where they continuously increase."
msgstr "Gör att B<watch> försöker köra I<kommando> var I<intervall> sekund. Prova det med B<ntptime> och observera hur decimalerna av sekunderna är (nästan) desamma, till skillnad mot det normala läget då de ökar kontinuerligt."
#. type: TP
#: ../watch.1:40
#, no-wrap
msgid "B<-t>, B<--no-title>"
msgstr "B<-t>, B<--no-title>"
#. type: Plain text
#: ../watch.1:44
msgid "Turn off the header showing the interval, command, and current time at the top of the display, as well as the following blank line."
msgstr "Slå av huvudet som visar intervallet, kommandot och aktuell tid längst upp på skärmen, liksom den följande tomma raden."
#. type: TP
#: ../watch.1:44
#, no-wrap
msgid "B<-b>, B<--beep>"
msgstr "B<-b>, B<--beep>"
#. type: Plain text
#: ../watch.1:47
msgid "Beep if command has a non-zero exit."
msgstr "Pip om kommandot har en slutstatus skild från noll."
#. type: TP
#: ../watch.1:47
#, no-wrap
msgid "B<-e>, B<--errexit>"
msgstr "B<-e>, B<--errexit>"
#. type: Plain text
#: ../watch.1:50
msgid "Freeze updates on command error, and exit after a key press."
msgstr "Frys uppdateringar vid kommandofel, och avsluta efter en tangenttryckning."
#. type: TP
#: ../watch.1:50
#, no-wrap
msgid "B<-g>, B<--chgexit>"
msgstr "B<-g>, B<--chgexit>"
#. type: Plain text
#: ../watch.1:55
msgid "Exit when the output of I<command> changes."
msgstr "Avsluta när utdata från I<kommando> ändras."
#. type: TP
#: ../watch.1:55
#, no-wrap
msgid "B<-c>, B<--color>"
msgstr "B<-c>, B<--color>"
#. type: Plain text
#: ../watch.1:58
msgid "Interpret ANSI color and style sequences."
msgstr "Tolka ANSI:s färg- och stilsekvenser."
#. type: TP
#: ../watch.1:58
#, no-wrap
msgid "B<-x>, B<--exec>"
msgstr "B<-x>, B<--exec>"
#. type: Plain text
#: ../watch.1:67
msgid "Pass I<command> to B<exec>(2) instead of B<sh -c> which reduces the need to use extra quoting to get the desired effect."
msgstr "Skicka I<kommando> till B<exec>(2) istället för B<sh -c> vilket reducerar behovet av extra citationstecken för att få den önskade effekten."
#. type: TP
#: ../watch.1:67
#, fuzzy, no-wrap
#| msgid "B<-t>, B<--no-title>"
msgid "B<-w>, B<--no-linewrap>"
msgstr "B<-t>, B<--no-title>"
#. type: Plain text
#: ../watch.1:70
msgid "Turn off line wrapping. Long lines will be truncated instead of wrapped to the next line."
msgstr "Slå av radbrytning. Långa rader kommer huggas av istället för att brytas till nästa rad."
#. type: TP
#: ../watch.1:73
#, no-wrap
msgid "B<-v>, B<--version>"
msgstr "B<-v>, B<--version>"
#. type: Plain text
#: ../watch.1:86
msgid "Various failures."
msgstr "Diverse fel."
#. type: TP
#: ../watch.1:86
#, no-wrap
msgid "B<2>"
msgstr "B<2>"
#. type: Plain text
#: ../watch.1:89
msgid "Forking the process to watch failed."
msgstr "Att grena av processen att övervaka misslyckades."
#. type: TP
#: ../watch.1:89
#, no-wrap
msgid "B<3>"
msgstr "B<3>"
#. type: Plain text
#: ../watch.1:92
msgid "Replacing child process stdout with write side pipe failed."
msgstr "Att ersätta en barnprocess standard ut med skrivsidan av ett rör misslyckades."
#. type: TP
#: ../watch.1:92
#, no-wrap
msgid "B<4>"
msgstr "B<4>"
#. type: Plain text
#: ../watch.1:95
msgid "Command execution failed."
msgstr "Kommandokörningen misslyckades."
#. type: TP
#: ../watch.1:95
#, no-wrap
msgid "B<5>"
msgstr "B<5>"
#. type: Plain text
#: ../watch.1:98
msgid "Closing child process write pipe failed."
msgstr "Att stänga barnprocessens skrivrör misslyckades."
#. type: TP
#: ../watch.1:98
#, no-wrap
msgid "B<7>"
msgstr "B<7>"
#. type: Plain text
#: ../watch.1:101
msgid "IPC pipe creation failed."
msgstr "Att skapa ett IPC-rör misslyckades."
#. type: TP
#: ../watch.1:101
#, no-wrap
msgid "B<8>"
msgstr "B<8>"
#. type: Plain text
#: ../watch.1:106
msgid "Getting child process return value with B<waitpid>(2) failed, or command exited up on error."
msgstr "Att få reda på barnprocessens returvärde med B<waitpid>(2) misslyckades, eller kommandot gav upp vid ett fel."
#. type: TP
#: ../watch.1:106
#, no-wrap
msgid "B<other>"
msgstr "B<övriga>"
#. type: Plain text
#: ../watch.1:109
msgid "The watch will propagate command exit status as child exit status."
msgstr "Watch kommer skicka vidare kommandots slutstatus som barnets slutstatus."
#. type: Plain text
#: ../watch.1:113
msgid "The behaviour of B<watch> is affected by the following environment variables."
msgstr "Beteendet hos B<watch> påverkas av följande miljövariabler."
#. type: TP
#: ../watch.1:114
#, no-wrap
msgid "B<WATCH_INTERVAL>"
msgstr "B<WATCH_INTERVAL>"
#. type: Plain text
#: ../watch.1:119
msgid "Update interval, follows the same rules as the B<--interval> command line option."
msgstr "Uppdateringsintervall, följer samma regler som kommandoradsflaggan B<--interval>."
#. type: Plain text
#: ../watch.1:126
msgid "POSIX option processing is used (i.e., option processing stops at the first non-option argument). This means that flags after I<command> don't get interpreted by B<watch> itself."
msgstr "POSIX flagghantering används (d.v.s., flaggbearbetning slutar vid det första argumentet som inte är en flagga). Detta betyder att flaggor efter I<kommando> inte tolkas av B<watch> självt."
#. type: Plain text
#: ../watch.1:131
msgid "Upon terminal resize, the screen will not be correctly repainted until the next scheduled update. All B<--differences> highlighting is lost on that update as well."
msgstr "När storleken på terminalen ändras kommer inte skärmen ritas om korrekt förrän nästa schemalagda uppdatering. All markering med B<--differences> går också förlorade vid den uppdateringen."
#. type: Plain text
#: ../watch.1:134
#, fuzzy
#| msgid "Non-printing characters are stripped from program output. Use \"cat -v\" as part of the command pipeline if you want to see them."
msgid "Non-printing characters are stripped from program output. Use B<cat -v> as part of the command pipeline if you want to see them."
msgstr "Icke skrivbara tecken tas bort från programs utdata. Använd ”cat -v” som en del av kommandoröret om du vill se dem."
#. type: Plain text
#: ../watch.1:138
msgid "Combining Characters that are supposed to display on the character at the last column on the screen may display one column early, or they may not display at all."
msgstr "Kombinerande tecken som är tänkta att visas som tecknet i sista kolumnen på skärmen kan komma att visas en kolumn för tidigt, eller kan komma att inte visas alls."
#. type: Plain text
#: ../watch.1:142
#, fuzzy
#| msgid "Combining Characters never count as different in I<--differences> mode. Only the base character counts."
msgid "Combining Characters never count as different in B<--differences> mode. Only the base character counts."
msgstr "Kombinerande tecken räknas aldrig som olika i läget I<--differences>. Endast grundtecknet räknas."
#. type: Plain text
#: ../watch.1:145
msgid "Blank lines directly after a line which ends in the last column do not display."
msgstr "Tomma rader direkt efter en rad som slutar i sista kolumnen visas inte."
#. type: Plain text
#: ../watch.1:162
#, fuzzy
#| msgid "I<--precise> mode doesn't yet have advanced temporal distortion technology to compensate for a I<command> that takes more than I<interval> seconds to execute. B<watch> also can get into a state where it rapid-fires as many executions of I<command> as it can to catch up from a previous executions running longer than I<interval> (for example, B<netstat> taking ages on a DNS lookup)."
msgid "B<--precise> mode doesn't yet have advanced temporal distortion technology to compensate for a I<command> that takes more than B<--interval> I<seconds> to execute. B<watch> also can get into a state where it rapid-fires as many executions of I<command> as it can to catch up from a previous executions running longer than B<--interval> (for example, B<netstat> taking ages on a DNS lookup)."
msgstr "Läget I<--precise> har inte ännu avancerad temporal distorsionsteknik för att kompensera för ett I<kommando> som tar mer än I<intervall> sekunder att köra. B<watch> kan också hamna i ett läge där det i snabb följd kör så många exekveringar det kan av I<kommando> för att komma ifatt efter en tidigare körning som varit längre än I<intervallet> (till exempel om B<netstat> tar evigheter för att göra en DNS-uppslagning)."
#. type: Plain text
#: ../watch.1:165
msgid "To watch for mail, you might do"
msgstr "För att titta efter post skulle du kunna göra"
#. type: Plain text
#: ../watch.1:167
msgid "watch -n 60 from"
msgstr "watch -n 60 from"
#. type: Plain text
#: ../watch.1:169
msgid "To watch the contents of a directory change, you could use"
msgstr "För att se innehållet i en katalog ändras kan du använda"
#. type: Plain text
#: ../watch.1:171
msgid "watch -d ls -l"
msgstr "watch -d ls -l"
#. type: Plain text
#: ../watch.1:173
msgid "If you're only interested in files owned by user joe, you might use"
msgstr "Om du bara är intresserad av filer som ägs av användaren kalle skulle du kunna använda"
#. type: Plain text
#: ../watch.1:175
msgid "watch -d 'ls -l | fgrep joe'"
msgstr "watch -d 'ls -l | fgrep kalle'"
#. type: Plain text
#: ../watch.1:177
msgid "To see the effects of quoting, try these out"
msgstr "För att se effekterna av att citera, prova dessa"
#. type: Plain text
#: ../watch.1:179
msgid "watch echo $$"
msgstr "watch echo $$"
#. type: Plain text
#: ../watch.1:181
msgid "watch echo '$$'"
msgstr "watch echo '$$'"
#. type: Plain text
#: ../watch.1:183
msgid "watch echo \"'\"'$$'\"'\""
msgstr "watch echo \"'\"'$$'\"'\""
#. type: Plain text
#: ../watch.1:187
#, fuzzy
#| msgid "To see the effect of precision time keeping, try adding I<-p> to"
msgid "To see the effect of precision time keeping, try adding B<-p> to"
msgstr "För att se effekten av att hålla tiden med precision, prova att lägga till I<-p> till"
#. type: Plain text
#: ../watch.1:189
msgid "watch -n 10 sleep 1"
msgstr "watch -n 10 sleep 1"
#. type: Plain text
#: ../watch.1:191
msgid "You can watch for your administrator to install the latest kernel with"
msgstr "Du kan se om din administratör installerar den senaste kärnan med"
#. type: Plain text
#: ../watch.1:193
msgid "watch uname -r"
msgstr "watch uname -r"
#. type: Plain text
#: ../watch.1:198
#, fuzzy
#| msgid "(Note that I<-p> isn't guaranteed to work across reboots, especially in the face of B<ntpdate> or other bootup time-changing mechanisms)"
msgid "(Note that B<-p> isn't guaranteed to work across reboots, especially in the face of B<ntpdate> (if present) or other bootup time-changing mechanisms)"
msgstr "(Observera att I<-p> inte är garanterat att fungera över en omstart, särskilt med hänsyn till B<ntpdate> eller andra mekanismer som ändrar tiden under uppstart)"
#. type: TH
#: ../ps/ps.1:7
#, no-wrap
msgid "PS"
msgstr "PS"
#. type: Plain text
#: ../ps/ps.1:29
#, fuzzy
#| msgid "pmap - report memory map of a process"
msgid "ps - report a snapshot of the current processes."
msgstr "pmap — rapportera minneskartan över en process"
#. type: Plain text
#: ../ps/ps.1:31
#, fuzzy
#| msgid "B<uptime> [I<options>]"
msgid "B<ps> [\\,I<options\\/>]"
msgstr "B<uptime> [I<flaggor>]"
#. type: Plain text
#: ../ps/ps.1:37
msgid "B<ps> displays information about a selection of the active processes. If you want a repetitive update of the selection and the displayed information, use B<top> instead."
msgstr "B<ps> visar information om ett urval av de aktiva processerna. Om du vill ha en upprepad uppdatering av urvalet och den visade informationen, använd B<top> istället."
#. type: Plain text
#: ../ps/ps.1:41
msgid "This version of B<ps> accepts several kinds of options:"
msgstr "Denna version av B<ps> accepterar flera olika sorters flaggor:"
#. type: Plain text
#: ../ps/ps.1:45
msgid "UNIX options, which may be grouped and must be preceded by a dash."
msgstr "UNIX-flaggor, som kan grupperas och måste föregås av ett bindestreck."
#. type: Plain text
#: ../ps/ps.1:47
msgid "BSD options, which may be grouped and must not be used with a dash."
msgstr "BSD-flaggor, som kan grupperas och inte får föregås av ett bindestreck."
#. type: Plain text
#: ../ps/ps.1:49
msgid "GNU long options, which are preceded by two dashes."
msgstr "GNU långa flaggor, vilka föregås av två bindestreck."
#. type: Plain text
#: ../ps/ps.1:58
msgid "Options of different types may be freely mixed, but conflicts can appear. There are some synonymous options, which are functionally identical, due to the many standards and B<ps> implementations that this B<ps> is compatible with."
msgstr "Flaggor av olika typer får blandas fritt, men konflikter kan förekomma. Det finns några synonyma flaggor, vars funktionalitet är identisk, på grund av de många standarder och B<ps>-implementationer som denna B<ps> är kompatibel med."
#. type: Plain text
#: ../ps/ps.1:69
msgid "Note that B<ps -aux> is distinct from B<ps\\ aux>. The POSIX and UNIX standards require that B<ps\\ -aux> print all processes owned by a user named I<x>, as well as printing all processes that would be selected by the B<-a> option. If the user named I<x> does not exist, this B<ps> may interpret the command as B<ps\\ aux> instead and print a warning. This behavior is intended to aid in transitioning old scripts and habits. It is fragile, subject to change, and thus should not be relied upon."
msgstr "Observera att B<ps -aux> är skilt från B<ps\\ aux>. POSIX- och UNIX-standarderna kräver att B<ps\\ -aux> skriver ut alla processer som ägs av en användare med namnet I<x>, såväl som att den skriver ut alla processer som skulle ha valts med flaggan B<-a>. Om användaren med namnet I<x> inte finns kan denna B<ps> tolka kommandot som B<ps\\ aux> istället och skriva en varning. Detta beteende är avsett att hjälpa till i övergången från gamla skript och vanor. Det är bräckligt, kan komma och ändras, och alltså inget man bör lita på."
#. type: Plain text
#: ../ps/ps.1:77
msgid "By default, B<ps> selects all processes with the same effective user ID (euid=EUID) as the current user and associated with the same terminal as the invoker. It displays the process ID (pid=PID), the terminal associated with the process (tname=TTY), the cumulated CPU time in [DD-]hh:mm:ss format (time=TIME), and the executable name (ucmd=CMD). Output is unsorted by default."
msgstr "Som standard väljer B<ps> alla processer med samma effektiva användar-ID (euid=EUID) som den aktiva användaren och associerade med samma terminal som anroparen. Den visar process-ID (pid=PID), terminalen som är associerad med processen (tname=TTY), den ackumulerade CPU-tiden i formatet [DD-]hh:mm:ss (time=TIME) och det körbara namnet (ucmd=CMD). Utdata är osorterat som standard."
#. type: Plain text
#: ../ps/ps.1:90
msgid "The use of BSD-style options will add process state (stat=STAT) to the default display and show the command args (args=COMMAND) instead of the executable name. You can override this with the B<PS_FORMAT> environment variable. The use of BSD-style options will also change the process selection to include processes on other terminals (TTYs) that are owned by you; alternately, this may be described as setting the selection to be the set of all processes filtered to exclude processes owned by other users or not on a terminal. These effects are not considered when options are described as being \"identical\" below, so B<-M> will be considered identical to B<Z> and so on."
msgstr "Användningen av flaggor i BSD-stil lägger till processtatus (stat=STAT) till standardvisningen och visar kommandoradsargument (args=COMMAND) istället för den körbaras namn. Du kan åsidosätta detta med miljövariablen B<PS_FORMAT>. Användingen av flaggor i BSD-stil ändrar också processvalet till att inkludera processer på andra terminaler (TTY:er) som ägs av dig; alternativt kan detta beskrivas som att sätta urvalet till att vara mängden av alla processer filtrerad för att utesluta processer som ägs av andra användare eller inte hör till en terminal. Dessa effekter beaktas inte när flaggor beskrivs som varandes ”identiska” nedan, så B<-M> kommer betraktas som identiskt med B<Z> och så vidare."
#. """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
#. type: Plain text
#: ../ps/ps.1:96
msgid "Except as described below, process selection options are additive. The default selection is discarded, and then the selected processes are added to the set of processes to be displayed. A process will thus be shown if it meets any of the given selection criteria."
msgstr "Förutom som det beskrivs nedan är processvalsflaggor additativa. Standardurvalet kastas och sedan lägs de valda processerna till till mängden processer som skall visas. En process kommer alltså visas om den uppfyller något av de angivna urvalskriterierna."
#. type: TP
#: ../ps/ps.1:97
#, no-wrap
msgid "To see every process on the system using standard syntax:"
msgstr "För att se alla processer på systemet använd standardsyntaxen:"
#. type: Plain text
#: ../ps/ps.1:100
msgid "B<ps\\ -e>"
msgstr "B<ps\\ -e>"
#. type: Plain text
#: ../ps/ps.1:102
msgid "B<ps\\ -ef>"
msgstr "B<ps\\ -ef>"
#. type: Plain text
#: ../ps/ps.1:104
msgid "B<ps\\ -eF>"
msgstr "B<ps\\ -eF>"
#. type: Plain text
#: ../ps/ps.1:106
msgid "B<ps\\ -ely>"
msgstr "B<ps\\ -ely>"
#. type: TP
#: ../ps/ps.1:106
#, no-wrap
msgid "To see every process on the system using BSD syntax:"
msgstr "För att se alla processer på systemed med BSD-syntax:"
#. type: Plain text
#: ../ps/ps.1:109
msgid "B<ps\\ ax>"
msgstr "B<ps\\ ax>"
#. type: Plain text
#: ../ps/ps.1:111
msgid "B<ps\\ axu>"
msgstr "B<ps\\ axu>"
#. type: TP
#: ../ps/ps.1:111
#, no-wrap
msgid "To print a process tree:"
msgstr "För att skriva ut ett processträd:"
#. type: Plain text
#: ../ps/ps.1:114
msgid "B<ps\\ -ejH>"
msgstr "B<ps\\ -ejH>"
#. type: Plain text
#: ../ps/ps.1:116
msgid "B<ps\\ axjf>"
msgstr "B<ps\\ axjf>"
#. type: TP
#: ../ps/ps.1:116
#, no-wrap
msgid "To get info about threads:"
msgstr "För att fi information om trådar:"
#. type: Plain text
#: ../ps/ps.1:119
msgid "B<ps\\ -eLf>"
msgstr "B<ps\\ -eLf>"
#. type: Plain text
#: ../ps/ps.1:121
msgid "B<ps\\ axms>"
msgstr "B<ps\\ axms>"
#. type: TP
#: ../ps/ps.1:121
#, no-wrap
msgid "To get security info:"
msgstr "För att få säkerhetsinformation:"
#. type: Plain text
#: ../ps/ps.1:124
msgid "B<ps\\ -eo euser,ruser,suser,fuser,f,comm,label>"
msgstr "B<ps\\ -eo euser,ruser,suser,fuser,f,comm,label>"
#. type: Plain text
#: ../ps/ps.1:126
msgid "B<ps\\ axZ>"
msgstr "B<ps\\ axZ>"
#. type: Plain text
#: ../ps/ps.1:128
msgid "B<ps\\ -eM>"
msgstr "B<ps\\ -eM>"
#. type: TP
#: ../ps/ps.1:128
#, no-wrap
msgid "To see every process running as root (real\\ &\\ effective\\ ID) in user format:"
msgstr "För att se alla processer som kör som root (verkligt & effektivt ID) i användarformat:"
#. type: Plain text
#: ../ps/ps.1:131
msgid "B<ps\\ -U\\ root\\ -u\\ root\\ u>"
msgstr "B<ps\\ -U\\ root\\ -u\\ root\\ u>"
#. type: TP
#: ../ps/ps.1:131
#, no-wrap
msgid "To see every process with a user-defined format:"
msgstr "För att se alla processer med ett användardefinierat format:"
#. type: Plain text
#: ../ps/ps.1:134
msgid "B<ps\\ -eo\\ pid,tid,class,rtprio,ni,pri,psr,pcpu,stat,wchan:14,comm>"
msgstr "B<ps\\ -eo\\ pid,tid,class,rtprio,ni,pri,psr,pcpu,stat,wchan:14,comm>"
#. type: Plain text
#: ../ps/ps.1:136
msgid "B<ps\\ axo\\ stat,euid,ruid,tty,tpgid,sess,pgrp,ppid,pid,pcpu,comm>"
msgstr "B<ps\\ axo\\ stat,euid,ruid,tty,tpgid,sess,pgrp,ppid,pid,pcpu,comm>"
#. type: Plain text
#: ../ps/ps.1:138
msgid "B<ps\\ -Ao\\ pid,tt,user,fname,tmout,f,wchan>"
msgstr "B<ps\\ -Ao\\ pid,tt,user,fname,tmout,f,wchan>"
#. type: TP
#: ../ps/ps.1:138
#, no-wrap
msgid "Print only the process IDs of syslogd:"
msgstr "Skriv endast ut process-ID:n för syslogd:"
#. type: Plain text
#: ../ps/ps.1:141
msgid "B<ps\\ -C\\ syslogd\\ -o\\ pid=>"
msgstr "B<ps\\ -C\\ syslogd\\ -o\\ pid=>"
#. type: TP
#: ../ps/ps.1:141
#, no-wrap
msgid "Print only the name of PID 42:"
msgstr "Skriv endast namnet på PID 42:"
#. """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
#. type: Plain text
#: ../ps/ps.1:145
msgid "B<ps\\ -q\\ 42\\ -o\\ comm=>"
msgstr "B<ps\\ -q\\ 42\\ -o\\ comm=>"
#. type: SH
#: ../ps/ps.1:145
#, fuzzy, no-wrap
#| msgid "PROCESS SELECTION OPTIONS"
msgid "SIMPLE PROCESS SELECTION"
msgstr "FLAGGOR FÖR VAL AV PROCESS"
#. type: TP
#: ../ps/ps.1:146
#, no-wrap
msgid "B<a>"
msgstr "B<a>"
#. type: Plain text
#: ../ps/ps.1:160
msgid "Lift the BSD-style \"only yourself\" restriction, which is imposed upon the set of all processes when some BSD-style (without \"-\") options are used or when the B<ps> personality setting is BSD-like. The set of processes selected in this manner is in addition to the set of processes selected by other means. An alternate description is that this option causes B<ps> to list all processes with a terminal (tty), or to list all processes when used together with the B<x> option."
msgstr "Lyft begränsningen ”endast dig själv” med BSD-stil, vilken läggs på mängden av alla processer när några flaggor i BSD-stil (utan ”-”) används eller när personlighetsinställningen för B<ps> är BSD-lik. Mängden processer som väljs på detta sätt är utöver mängden processer som väljs på andra sätt. Ett annat sätt att beskriva detta är att denna flagga får B<ps> att lista alla processer med en terminal (tty) eller att lista alla processer när de används tillsammans med flaggan B<x>."
#. type: Plain text
#: ../ps/ps.1:164
msgid "Select all processes. Identical to B<-e>."
msgstr "Välj alla processer. Identiskt med B<-e>."
#. type: TP
#: ../ps/ps.1:164
#, no-wrap
msgid "B<-a>"
msgstr "B<-a>"
#. type: Plain text
#: ../ps/ps.1:169
msgid "Select all processes except both session leaders (see I<getsid>(2)) and processes not associated with a terminal."
msgstr "Välj alla processer utom både sessionsledare (se I<getsid>(2)) och processer som inte är associerade med någon terminal."
#. type: Plain text
#: ../ps/ps.1:172
msgid "Select all processes except session leaders."
msgstr "Välj alla processer utom sessionsledare."
#. type: TP
#: ../ps/ps.1:172
#, fuzzy, no-wrap
#| msgid "B<--deprecated>"
msgid "B<--deselect>"
msgstr "B<--deprecated>"
#. type: Plain text
#: ../ps/ps.1:177
msgid "Select all processes except those that fulfill the specified conditions (negates the selection). Identical to B<-N>."
msgstr "Välj alla processer utom de som möter de angivna villkoren (negerar valet). Identiskt med B<-N>."
#. type: TP
#: ../ps/ps.1:177
#, no-wrap
msgid "B<-e>"
msgstr "B<-e>"
#. Current "g" behavior: add in the session leaders, which would
#. be excluded in the sunos4 personality. Supposed "g" behavior:
#. add in the group leaders -- at least according to the SunOS 4
#. man page on the FreeBSD site. Uh oh. I think I had tested SunOS
#. though, so maybe the code is correct.
#. type: Plain text
#: ../ps/ps.1:186
msgid "Select all processes. Identical to B<-A>."
msgstr "Välj alla processer. Identiskt med B<-A>."
#. type: TP
#: ../ps/ps.1:186
#, no-wrap
msgid "B<g>"
msgstr "B<g>"
#. type: Plain text
#: ../ps/ps.1:192
msgid "Really all, even session leaders. This flag is obsolete and may be discontinued in a future release. It is normally implied by the B<a> flag, and is only useful when operating in the sunos4 personality."
msgstr "Verkligen alla, även sessionsledare. Denna flagga är föråldrar och kan försvinna i en framtida utgåva. Den impliceras normalt av flaggan B<a> och är endast användbar på operativsystem i personligheten sunos4."
#. type: TP
#: ../ps/ps.1:192
#, no-wrap
msgid "B<-N>"
msgstr "B<-N>"
#. type: Plain text
#: ../ps/ps.1:197
msgid "Select all processes except those that fulfill the specified conditions (negates the selection). Identical to B<--deselect>."
msgstr "Välj alla processer utom de som möter de angivna villkoren (negerar valet). Identiskt med B<--deselect>."
#. type: TP
#: ../ps/ps.1:197
#, no-wrap
msgid "B<T>"
msgstr "B<T>"
#. type: Plain text
#: ../ps/ps.1:202
msgid "Select all processes associated with this terminal. Identical to the B<t> option without any argument."
msgstr "Välj alla processer associerade med denna terminal. Identiskt med flaggan B<t> utan något argument."
#. type: TP
#: ../ps/ps.1:202
#, no-wrap
msgid "B<r>"
msgstr "B<r>"
#. type: Plain text
#: ../ps/ps.1:205
msgid "Restrict the selection to only running processes."
msgstr "Begränsa urvalet till endast körande processer."
#. type: TP
#: ../ps/ps.1:205
#, no-wrap
msgid "B<x>"
msgstr "B<x>"
#. """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
#. type: Plain text
#: ../ps/ps.1:221
msgid "Lift the BSD-style \"must have a tty\" restriction, which is imposed upon the set of all processes when some BSD-style (without \"-\") options are used or when the B<ps> personality setting is BSD-like. The set of processes selected in this manner is in addition to the set of processes selected by other means. An alternate description is that this option causes B<ps> to list all processes owned by you (same EUID as B<ps>), or to list all processes when used together with the B<a> option."
msgstr "Lyft begränsningen ”måste ha en ttty” med BSD-stil, vilken läggs på mängden av alla processer när några flaggor i BSD-stil (utan ”-”) används eller när personlighetsinställningen för B<ps> är BSD-lik. Mängden processer som väljs på detta sätt är utöver mängden processer som väljs på andra sätt. Ett annat sätt att beskriva detta är att denna flagga får B<ps> att lista alla processer som ägs av dig (samma EAID som B<ps>) eller att lista alla processer när de används tillsammans med flaggan B<a>."
#. type: SH
#: ../ps/ps.1:222
#, fuzzy, no-wrap
#| msgid "PROCESS SELECTION OPTIONS"
msgid "PROCESS SELECTION BY LIST"
msgstr "FLAGGOR FÖR VAL AV PROCESS"
#. type: Plain text
#: ../ps/ps.1:226
msgid "These options accept a single argument in the form of a blank-separated or comma-separated list. They can be used multiple times. For example: B<ps\\ -p\\ \"1\\ 2\"\\ -p\\ 3,4>"
msgstr "Dessa flaggor tar ett ensamt argument på formen av en mellanslagsseparerad eller kommaseparerad lista. De kan användas flera gånger. Till exempel: B<ps\\ -p\\ \"1\\ 2\"\\ -p\\ 3,4>"
#. type: TP
#: ../ps/ps.1:226
#, no-wrap
msgid "-I<123>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:230 ../ps/ps.1:234
msgid "Identical to B<--pid\\ >I<123>."
msgstr ""
#. type: TP
#: ../ps/ps.1:230
#, no-wrap
msgid "I<123>"
msgstr ""
#. type: TP
#: ../ps/ps.1:234
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<-C>I<\\ cmdlist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:243
msgid "Select by command name. This selects the processes whose executable name is given in I<cmdlist>. NOTE: The command name is not the same as the command line. Previous versions of procps and the kernel truncated this command name to 15 characters. This limitation is no longer present in both. If you depended on matching only 15 characters, you may no longer get a match."
msgstr ""
#. type: TP
#: ../ps/ps.1:243
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<-G>I<\\ grplist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:251
msgid "Select by real group ID (RGID) or name. This selects the processes whose real group name or ID is in the I<grplist> list. The real group ID identifies the group of the user who created the process, see I<getgid>(2)."
msgstr ""
#. type: TP
#: ../ps/ps.1:251
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<-g>I<\\ grplist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:264
msgid "Select by session OR by effective group name. Selection by session is specified by many standards, but selection by effective group is the logical behavior that several other operating systems use. This B<ps> will select by session when the list is completely numeric (as sessions are). Group ID numbers will work only when some group names are also specified. See the B<-s> and B<--group> options."
msgstr ""
#. type: TP
#: ../ps/ps.1:264
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<--Group>I<\\ grplist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:268
msgid "Select by real group ID (RGID) or name. Identical to B<-G>."
msgstr ""
#. type: TP
#: ../ps/ps.1:268
#, fuzzy, no-wrap
#| msgid "B<-g>, B<--pgroup> I<pgrp>,..."
msgid "B<--group>I<\\ grplist>"
msgstr "B<-g>, B<--pgroup> I<pgrp>,…"
#. type: Plain text
#: ../ps/ps.1:280
msgid "Select by effective group ID (EGID) or name. This selects the processes whose effective group name or ID is in I<grplist>. The effective group ID describes the group whose file access permissions are used by the process (see I<getegid>(2)). The B<-g> option is often an alternative to B<--group>."
msgstr ""
#. type: TP
#: ../ps/ps.1:280
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<p>I<\\ pidlist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:286
msgid "Select by process ID. Identical to B<-p> and B<--pid>."
msgstr ""
#. type: TP
#: ../ps/ps.1:286
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<-p>I<\\ pidlist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:294
msgid "Select by PID. This selects the processes whose process ID numbers appear in I<pidlist>. Identical to B<p> and B<--pid>."
msgstr ""
#. type: TP
#: ../ps/ps.1:294
#, fuzzy, no-wrap
#| msgid "B<-p>, B<--pid> I<pid>"
msgid "B<--pid>I<\\ pidlist>"
msgstr "B<-p>, B<--pid> I<pid>"
#. type: Plain text
#: ../ps/ps.1:300
msgid "Select by process\\ ID. Identical to B<-p> and B<p>."
msgstr ""
#. type: TP
#: ../ps/ps.1:300
#, fuzzy, no-wrap
#| msgid "B<-p>, B<--pid> I<pid>"
msgid "B<--ppid>I<\\ pidlist>"
msgstr "B<-p>, B<--pid> I<pid>"
#. type: Plain text
#: ../ps/ps.1:307
msgid "Select by parent process ID. This selects the processes with a parent process\\ ID in I<pidlist>. That is, it selects processes that are children of those listed in I<pidlist>."
msgstr ""
#. type: TP
#: ../ps/ps.1:307
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<q>I<\\ pidlist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:313
msgid "Select by process ID (quick mode). Identical to B<-q> and B<--quick-pid>."
msgstr ""
#. type: TP
#: ../ps/ps.1:313
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<-q>I<\\ pidlist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:329
msgid "Select by PID (quick mode). This selects the processes whose process ID numbers appear in I<pidlist>. With this option B<ps> reads the necessary info only for the pids listed in the I<pidlist> and doesn't apply additional filtering rules. The order of pids is unsorted and preserved. No additional selection options, sorting and forest type listings are allowed in this mode. Identical to B<q> and B<--quick-pid>."
msgstr ""
#. type: TP
#: ../ps/ps.1:329
#, fuzzy, no-wrap
#| msgid "B<-p>, B<--pid> I<pid>"
msgid "B<--quick-pid>I<\\ pidlist>"
msgstr "B<-p>, B<--pid> I<pid>"
#. type: Plain text
#: ../ps/ps.1:335
msgid "Select by process\\ ID (quick mode). Identical to B<-q> and B<q>."
msgstr ""
#. type: TP
#: ../ps/ps.1:335
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<-s>I<\\ sesslist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:340
msgid "Select by session ID. This selects the processes with a session ID specified in I<sesslist>."
msgstr ""
#. type: TP
#: ../ps/ps.1:340
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<--sid>I<\\ sesslist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:344
msgid "Select by session\\ ID. Identical to B<-s>."
msgstr ""
#. type: TP
#: ../ps/ps.1:344
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<t>I<\\ ttylist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:361
msgid "Select by tty. Nearly identical to B<-t> and B<--tty>, but can also be used with an empty I<ttylist> to indicate the terminal associated with B<ps>. Using the B<T> option is considered cleaner than using B<t> with an empty I<ttylist>."
msgstr ""
#. type: TP
#: ../ps/ps.1:361
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<-t>I<\\ ttylist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:369
msgid "Select by tty. This selects the processes associated with the terminals given in I<ttylist>. Terminals (ttys, or screens for text output) can be specified in several forms: /dev/ttyS1, ttyS1, S1. A plain \"-\" may be used to select processes not attached to any terminal."
msgstr ""
#. type: TP
#: ../ps/ps.1:369
#, fuzzy, no-wrap
#| msgid "B<-t>, B<--tty> I<tty>"
msgid "B<--tty>I<\\ ttylist>"
msgstr "B<-t>, B<--tty> I<tty>"
#. type: Plain text
#: ../ps/ps.1:375
msgid "Select by terminal. Identical to B<-t> and B<t>."
msgstr ""
#. type: TP
#: ../ps/ps.1:375
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<U>I<\\ userlist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:387
msgid "Select by effective user ID (EUID) or name. This selects the processes whose effective user name or ID is in I<userlist>. The effective user ID describes the user whose file access permissions are used by the process (see I<geteuid>(2)). Identical to B<-u> and B<--user>."
msgstr ""
#. type: TP
#: ../ps/ps.1:387
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<-U>I<\\ userlist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:394
msgid "Select by real user ID (RUID) or name. It selects the processes whose real user name or ID is in the I<userlist> list. The real user ID identifies the user who created the process, see I<getuid>(2)."
msgstr ""
#. type: TP
#: ../ps/ps.1:394
#, fuzzy, no-wrap
#| msgid "B<-l>,B<\\ --list>"
msgid "B<-u>I<\\ userlist>"
msgstr "B<-l>,B<\\ --list>"
#. type: Plain text
#: ../ps/ps.1:399
msgid "Select by effective user ID (EUID) or name. This selects the processes whose effective user name or ID is in I<userlist>."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:407
msgid "The effective user ID describes the user whose file access permissions are used by the process (see I<geteuid>(2)). Identical to B<U> and B<--user>."
msgstr ""
#. type: TP
#: ../ps/ps.1:407
#, fuzzy, no-wrap
#| msgid "B<-u>, B<--user> I<user>"
msgid "B<--User>I<\\ userlist>"
msgstr "B<-u>, B<--user> I<användare>"
#. type: Plain text
#: ../ps/ps.1:411
msgid "Select by real user ID (RUID) or name. Identical to B<-U>."
msgstr ""
#. type: TP
#: ../ps/ps.1:411
#, fuzzy, no-wrap
#| msgid "B<-u>, B<--user> I<user>"
msgid "B<--user>I<\\ userlist>"
msgstr "B<-u>, B<--user> I<användare>"
#. """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
#. type: Plain text
#: ../ps/ps.1:418
msgid "Select by effective user ID (EUID) or name. Identical to B<-u> and B<U>."
msgstr ""
#. type: SH
#: ../ps/ps.1:419
#, no-wrap
msgid "OUTPUT FORMAT CONTROL"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:423
msgid "These options are used to choose the information displayed by B<ps>. The output may differ by personality."
msgstr ""
#. type: TP
#: ../ps/ps.1:423
#, no-wrap
msgid "B<-c>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:428
msgid "Show different scheduler information for the B<-l> option."
msgstr ""
#. type: TP
#: ../ps/ps.1:428
#, fuzzy, no-wrap
#| msgid "B<--tebi>"
msgid "B<--context>"
msgstr "B<--tebi>"
#. type: Plain text
#: ../ps/ps.1:431
#, fuzzy
#| msgid "Display version information."
msgid "Display security context format (for SELinux)."
msgstr "Visa versionsinformation."
#. type: Plain text
#: ../ps/ps.1:444
msgid "Do full-format listing. This option can be combined with many other UNIX-style options to add additional columns. It also causes the command arguments to be printed. When used with B<-L>, the NLWP (number of threads) and LWP (thread ID) columns will be added. See the B<c> option, the format keyword B<args>, and the format keyword B<comm>."
msgstr ""
#. type: TP
#: ../ps/ps.1:444
#, no-wrap
msgid "B<-F>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:451
msgid "Extra full format. See the B<-f> option, which B<-F> implies."
msgstr ""
#. type: TP
#: ../ps/ps.1:451
#, no-wrap
msgid "B<--format>I<\\ format>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:457
msgid "user-defined format. Identical to B<-o> and B<o>."
msgstr ""
#. type: TP
#: ../ps/ps.1:457
#, no-wrap
msgid "B<j>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:460
msgid "BSD job control format."
msgstr ""
#. type: TP
#: ../ps/ps.1:460
#, no-wrap
msgid "B<-j>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:463
msgid "Jobs format."
msgstr ""
#. type: TP
#: ../ps/ps.1:463
#, no-wrap
msgid "B<l>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:466
#, fuzzy
#| msgid "Display version information."
msgid "Display BSD long format."
msgstr "Visa versionsinformation."
#. type: TP
#: ../ps/ps.1:466
#, no-wrap
msgid "B<-l>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:471
msgid "Long format. The B<-y> option is often useful with this."
msgstr ""
#. type: TP
#: ../ps/ps.1:471
#, no-wrap
msgid "B<-M>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:476
msgid "Add a column of security data. Identical to B<Z> (for SELinux)."
msgstr ""
#. type: TP
#: ../ps/ps.1:476
#, no-wrap
msgid "B<O>I<\\ format>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:494
msgid "is preloaded B<o> (overloaded). The BSD B<O> option can act like B<-O> (user-defined output format with some common fields predefined) or can be used to specify sort order. Heuristics are used to determine the behavior of this option. To ensure that the desired behavior is obtained (sorting or formatting), specify the option in some other way (e.g. with B<-O> or B<--sort>). When used as a formatting option, it is identical to B<-O>, with the BSD personality."
msgstr ""
#. type: TP
#: ../ps/ps.1:494
#, no-wrap
msgid "B<-O>I<\\ format>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:505
msgid "Like B<-o>, but preloaded with some default columns. Identical to B<-o\\ pid,\\:>I<format>B<,\\:state,\\:tname,\\:time,\\:command> or B<-o\\ pid,\\:>I<format>B<,\\:tname,\\:time,\\:cmd>, see B<-o> below."
msgstr ""
#. type: TP
#: ../ps/ps.1:505
#, no-wrap
msgid "B<o>I<\\ format>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:511
msgid "Specify user-defined format. Identical to B<-o> and B<--format>."
msgstr ""
#. type: TP
#: ../ps/ps.1:511
#, no-wrap
msgid "B<-o>I<\\ format>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:539
msgid "User-defined format. I<format> is a single argument in the form of a blank-separated or comma-separated list, which offers a way to specify individual output columns. The recognized keywords are described in the B<STANDARD FORMAT SPECIFIERS> section below. Headers may be renamed (B<ps -o pid,\\:ruser=RealUser -o comm=Command>) as desired. If all column headers are empty (B<ps -o pid= -o comm=>) then the header line will not be output. Column width will increase as needed for wide headers; this may be used to widen up columns such as WCHAN (B<ps -o pid,\\:wchan=\\:WIDE-\\:WCHAN-\\:COLUMN -o comm>). Explicit width control (B<ps opid,\\:wchan:42,\\:cmd>) is offered too. The behavior of B<ps -o pid=X,\\:comm=Y> varies with personality; output may be one column named \"X,\\:comm=Y\" or two columns named \"X\" and \"Y\". Use multiple B<-o> options when in doubt. Use the B<PS_FORMAT> environment variable to specify a default as desired; DefSysV and DefBSD are macros that may be used to choose the default UNIX or BSD columns."
msgstr ""
#. type: TP
#: ../ps/ps.1:539
#, no-wrap
msgid "B<s>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:542
#, fuzzy
#| msgid "Display version information."
msgid "Display signal format."
msgstr "Visa versionsinformation."
#. type: TP
#: ../ps/ps.1:542
#, no-wrap
msgid "B<u>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:545
#, fuzzy
#| msgid "Display version information."
msgid "Display user-oriented format."
msgstr "Visa versionsinformation."
#. type: TP
#: ../ps/ps.1:545
#, no-wrap
msgid "B<v>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:548
#, fuzzy
#| msgid "Display version information."
msgid "Display virtual memory format."
msgstr "Visa versionsinformation."
#. type: TP
#: ../ps/ps.1:548
#, no-wrap
msgid "B<X>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:551
msgid "Register format."
msgstr ""
#. type: TP
#: ../ps/ps.1:551
#, no-wrap
msgid "B<-y>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:556
msgid "Do not show flags; show rss in place of addr. This option can only be used with B<-l>."
msgstr ""
#. type: TP
#: ../ps/ps.1:556
#, no-wrap
msgid "B<Z>"
msgstr ""
#. """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
#. type: Plain text
#: ../ps/ps.1:562
msgid "Add a column of security data. Identical to B<-M> (for SELinux)."
msgstr ""
#. type: SH
#: ../ps/ps.1:563
#, no-wrap
msgid "OUTPUT MODIFIERS"
msgstr ""
#. type: TP
#: ../ps/ps.1:567
#, no-wrap
msgid "B<c>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:585
msgid "Show the true command name. This is derived from the name of the executable file, rather than from the argv value. Command arguments and any modifications to them are thus not shown. This option effectively turns the B<args> format keyword into the B<comm> format keyword; it is useful with the B<-f> format option and with the various BSD-style format options, which all normally display the command arguments. See the B<-f> option, the format keyword B<args>, and the format keyword B<comm>."
msgstr ""
#. type: TP
#: ../ps/ps.1:585
#, fuzzy, no-wrap
#| msgid "B<--ns >I<pid>"
msgid "B<--cols>I<\\ n>"
msgstr "B<--ns >I<pid>"
#. """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
#. type: Plain text
#: ../ps/ps.1:588 ../ps/ps.1:591 ../ps/ps.1:725
msgid "Set screen width."
msgstr ""
#. type: TP
#: ../ps/ps.1:588
#, fuzzy, no-wrap
#| msgid "B<--ns >I<pid>"
msgid "B<--columns>I<\\ n>"
msgstr "B<--ns >I<pid>"
#. type: TP
#: ../ps/ps.1:591
#, fuzzy, no-wrap
#| msgid "B<-a>, B<--active>"
msgid "B<--cumulative>"
msgstr "B<-a>, B<--active>"
#. type: Plain text
#: ../ps/ps.1:594
msgid "Include some dead child process data (as a sum with the parent)."
msgstr ""
#. type: TP
#: ../ps/ps.1:594
#, no-wrap
msgid "B<e>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:597
#, fuzzy
#| msgid "Show the device format."
msgid "Show the environment after the command."
msgstr "Visa enhetsformatet."
#. type: TP
#: ../ps/ps.1:597
#, no-wrap
msgid "B<f>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:600
msgid "ASCII art process hierarchy (forest)."
msgstr ""
#. type: TP
#: ../ps/ps.1:600
#, fuzzy, no-wrap
#| msgid "B<--peta>"
msgid "B<--forest>"
msgstr "B<--peta>"
#. type: Plain text
#: ../ps/ps.1:603
msgid "ASCII art process tree."
msgstr ""
#. type: TP
#: ../ps/ps.1:603
#, no-wrap
msgid "B<h>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:621
msgid "No header. (or, one header per screen in the BSD personality). The B<h> option is problematic. Standard BSD B<ps> uses this option to print a header on each page of output, but older Linux B<ps> uses this option to totally disable the header. This version of B<ps> follows the Linux usage of not printing the header unless the BSD personality has been selected, in which case it prints a header on each page of output. Regardless of the current personality, you can use the long options B<--headers> and B<--no-headers> to enable printing headers each page or disable headers entirely, respectively."
msgstr ""
#. type: TP
#: ../ps/ps.1:621
#, no-wrap
msgid "B<-H>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:624
msgid "Show process hierarchy (forest)."
msgstr ""
#. type: TP
#: ../ps/ps.1:624
#, fuzzy, no-wrap
#| msgid "B<header>"
msgid "B<--headers>"
msgstr "B<huvud>"
#. type: Plain text
#: ../ps/ps.1:627
msgid "Repeat header lines, one per page of output."
msgstr ""
#. type: TP
#: ../ps/ps.1:627
#, no-wrap
msgid "B<k>I<\\ spec>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:639
msgid "Specify sorting order. Sorting syntax is [B<+>|B<->]I<key\\/.RB [,[ + | - ].IR key [,...]].> Choose a multi-letter key from the B<STANDARD FORMAT SPECIFIERS> section. The \"+\" is optional since default direction is increasing numerical or lexicographic order. Identical to B<--sort>."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:642
msgid "Examples:"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:644
msgid "B<ps jaxkuid,-ppid,+pid>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:646
msgid "B<ps axk comm o comm,args>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:648
msgid "B<ps kstart_time -ef>"
msgstr ""
#. type: TP
#: ../ps/ps.1:649
#, fuzzy, no-wrap
#| msgid "B<--ns >I<pid>"
msgid "B<--lines>I<\\ n>"
msgstr "B<--ns >I<pid>"
#. type: Plain text
#: ../ps/ps.1:652 ../ps/ps.1:696
msgid "Set screen height."
msgstr ""
#. type: TP
#: ../ps/ps.1:652
#, no-wrap
msgid "B<n>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:655
msgid "Numeric output for WCHAN and USER (including all types of UID and GID)."
msgstr ""
#. type: TP
#: ../ps/ps.1:655
#, fuzzy, no-wrap
#| msgid "B<-h>, B<--no-header>"
msgid "B<--no-headers>"
msgstr "B<-h>, B<--no-header>"
#. type: Plain text
#: ../ps/ps.1:660
msgid "Print no header line at all. B<--no-heading> is an alias for this option."
msgstr ""
#. type: TP
#: ../ps/ps.1:660
#, no-wrap
msgid "B<O>I<\\ order>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:674
msgid "Sorting order (overloaded). The BSD B<O> option can act like B<-O> (user-defined output format with some common fields predefined) or can be used to specify sort order. Heuristics are used to determine the behavior of this option. To ensure that the desired behavior is obtained (sorting or formatting), specify the option in some other way (e.g. with B<-O> or B<--sort>)."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:693
msgid "For sorting, obsolete BSD B<O> option syntax is B<O>[B<+>|B<->]I<k1>[,[B<+>|B<->]I<k2>[,...]]. It orders the processes listing according to the multilevel sort specified by the sequence of one-letter short keys I<k1>,I<k2>, ...\" described in the B<OBSOLETE SORT KEYS> section below. The\\ \"+\" is currently optional, merely re-iterating the default direction on a key, but may help to distinguish an B<O> sort from an B<O> format. The \"-\" reverses direction only on the key it precedes."
msgstr ""
#. type: TP
#: ../ps/ps.1:693
#, fuzzy, no-wrap
#| msgid "B<--ns >I<pid>"
msgid "B<--rows>I<\\ n>"
msgstr "B<--ns >I<pid>"
#. type: TP
#: ../ps/ps.1:696
#, no-wrap
msgid "B<S>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:701
msgid "Sum up some information, such as CPU usage, from dead child processes into their parent. This is useful for examining a system where a parent process repeatedly forks off short-lived children to do work."
msgstr ""
#. type: TP
#: ../ps/ps.1:701
#, fuzzy, no-wrap
#| msgid "B<--ns >I<pid>"
msgid "B<--sort>I<\\ spec>"
msgstr "B<--ns >I<pid>"
#. type: Plain text
#: ../ps/ps.1:715
msgid "Specify sorting order. Sorting syntax is [I<+>|I<->]I<key>[,[B<+>|B<->]I<key>[,...]]. Choose a multi-letter key from the B<STANDARD FORMAT SPECIFIERS> section. The \"+\" is optional since default direction is increasing numerical or lexicographic order. Identical to B<k>. For example: B<ps jax --sort=\\:uid,\\:-ppid,\\:+pid>"
msgstr ""
#. type: TP
#: ../ps/ps.1:715
#, no-wrap
msgid "B<w>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:718 ../ps/ps.1:721
msgid "Wide output. Use this option twice for unlimited width."
msgstr ""
#. type: TP
#: ../ps/ps.1:718
#, no-wrap
msgid "B<-w>"
msgstr ""
#. type: TP
#: ../ps/ps.1:721
#, no-wrap
msgid "B<--width>I<\\ n>"
msgstr ""
#. type: SH
#: ../ps/ps.1:726
#, no-wrap
msgid "THREAD DISPLAY"
msgstr ""
#. type: TP
#: ../ps/ps.1:727
#, no-wrap
msgid "B<H>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:730
msgid "Show threads as if they were processes."
msgstr ""
#. type: TP
#: ../ps/ps.1:730
#, no-wrap
msgid "B<-L>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:733
msgid "Show threads, possibly with LWP and NLWP columns."
msgstr ""
#. type: TP
#: ../ps/ps.1:733
#, no-wrap
msgid "B<m>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:736 ../ps/ps.1:739
msgid "Show threads after processes."
msgstr ""
#. type: TP
#: ../ps/ps.1:736
#, no-wrap
msgid "B<-m>"
msgstr ""
#. type: TP
#: ../ps/ps.1:739
#, no-wrap
msgid "B<-T>"
msgstr ""
#. """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
#. type: Plain text
#: ../ps/ps.1:743
msgid "Show threads, possibly with SPID column."
msgstr ""
#. type: SH
#: ../ps/ps.1:743
#, no-wrap
msgid "OTHER INFORMATION"
msgstr ""
#. type: TP
#: ../ps/ps.1:744
#, fuzzy, no-wrap
#| msgid "B<-d>, B<--delay> I<seconds>"
msgid "B<--help>I<\\ section>"
msgstr "B<-d>, B<--delay> I<sekunder>"
#. type: Plain text
#: ../ps/ps.1:755
msgid "Print a help message. The I<section> argument can be one of I<s>imple, I<l>ist, I<o>utput, I<t>hreads, I<m>isc, or I<a>ll. The argument can be shortened to one of the underlined letters as in: s\\^|\\^l\\^|\\^o\\^|\\^t\\^|\\^m\\^|\\^a."
msgstr ""
#. type: TP
#: ../ps/ps.1:755
#, fuzzy, no-wrap
#| msgid "B<--kilo>"
msgid "B<--info>"
msgstr "B<--kilo>"
#. type: Plain text
#: ../ps/ps.1:758
msgid "Print debugging info."
msgstr ""
#. type: TP
#: ../ps/ps.1:758
#, no-wrap
msgid "B<L>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:761
msgid "List all format specifiers."
msgstr ""
#. type: TP
#: ../ps/ps.1:761
#, no-wrap
msgid "B<V>"
msgstr ""
#. """""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
#. type: Plain text
#: ../ps/ps.1:764 ../ps/ps.1:767 ../ps/ps.1:771
msgid "Print the procps-ng version."
msgstr ""
#. type: TP
#: ../ps/ps.1:764
#, no-wrap
msgid "B<-V>"
msgstr ""
#. type: TP
#: ../ps/ps.1:767
#, fuzzy, no-wrap
#| msgid "B<-V>, B<--version>"
msgid "B<--version>"
msgstr "B<-V>, B<--version>"
#. type: Plain text
#: ../ps/ps.1:780
msgid "This B<ps> works by reading the virtual files in /proc. This B<ps> does not need to be setuid kmem or have any privileges to run. Do not give this B<ps> any special permissions."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:786
msgid "CPU usage is currently expressed as the percentage of time spent running during the entire lifetime of a process. This is not ideal, and\\ it does not conform to the standards that B<ps> otherwise conforms to. CPU usage is unlikely to add up to exactly 100%."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:791
msgid "The SIZE and RSS fields don't count some parts of a process including the page tables, kernel stack, struct thread_info, and struct task_struct. This is usually at least 20\\ KiB of memory that is always resident. SIZE is the virtual size of the process (code+\\:data+\\:stack)."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:797
msgid "Processes marked E<lt>defunctE<gt> are dead processes (so-called \"zombies\") that remain because their parent has not destroyed them properly. These processes will be destroyed by I<init>(8) if the parent process exits."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:801
msgid "If the length of the username is greater than the length of the display column, the username will be truncated. See the B<-o> and B<-O> formatting options to customize length."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:811
msgid "Commands options such as B<ps -aux> are not recommended as it is a confusion of two different standards. According to the POSIX and UNIX standards, the above command asks to display all processes with a TTY (generally the commands users are running) plus all processes owned by a user named I<x>. If that user doesn't exist, then B<ps> will assume you really meant B<ps aux>."
msgstr ""
#. type: SH
#: ../ps/ps.1:811
#, no-wrap
msgid "PROCESS FLAGS"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:816
msgid "The sum of these values is displayed in the \"F\" column, which is provided by the B<flags> output specifier:"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:822
msgid "forked but didn't exec"
msgstr ""
#. type: IP
#: ../ps/ps.1:822 ../ps/ps.1:1985
#, no-wrap
msgid "4"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:825
msgid "used super-user privileges"
msgstr ""
#. type: SH
#: ../ps/ps.1:827
#, no-wrap
msgid "PROCESS STATE CODES"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:832
msgid "Here are the different values that the B<s>, B<stat> and B<state> output specifiers (header \"STAT\" or \"S\") will display to describe the state of a process:"
msgstr ""
#. type: TP
#: ../ps/ps.1:835
#, no-wrap
msgid "D"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:838
msgid "uninterruptible sleep (usually IO)"
msgstr ""
#. type: TP
#: ../ps/ps.1:838
#, fuzzy, no-wrap
#| msgid "IO"
msgid "I"
msgstr "IO"
#. type: Plain text
#: ../ps/ps.1:841
msgid "Idle kernel thread"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:841 ../ps/ps.1:926
#, no-wrap
msgid "R"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:844
msgid "running or runnable (on run queue)"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:844 ../ps/ps.1:928 ../ps/ps.1:1566 ../ps/ps.1:1688
#, no-wrap
msgid "S"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:847
msgid "interruptible sleep (waiting for an event to complete)"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:847 ../ps/ps.1:930
#, no-wrap
msgid "T"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:850
msgid "stopped by job control signal"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:850 ../ps/ps.1:929
#, no-wrap
msgid "t"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:853
msgid "stopped by debugger during the tracing"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:856
msgid "paging (not valid since the 2.6.xx kernel)"
msgstr ""
#. type: TP
#: ../ps/ps.1:856
#, no-wrap
msgid "X"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:859
msgid "dead (should never be seen)"
msgstr ""
#. type: TP
#: ../ps/ps.1:859
#, no-wrap
msgid "Z"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:862
msgid "defunct (\"zombie\") process, terminated but not reaped by its parent"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:868
msgid "For BSD formats and when the B<stat> keyword is used, additional characters may be displayed:"
msgstr ""
#. type: TP
#: ../ps/ps.1:871
#, no-wrap
msgid "E<lt>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:874
msgid "high-priority (not nice to other users)"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:874 ../ps/ps.1:921
#, no-wrap
msgid "N"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:877
msgid "low-priority (nice to other users)"
msgstr ""
#. type: TP
#: ../ps/ps.1:877
#, no-wrap
msgid "L"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:880
msgid "has pages locked into memory (for real-time and custom IO)"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:883
msgid "is a session leader"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:886
msgid "is multi-threaded (using CLONE_THREAD, like NPTL pthreads do)"
msgstr ""
#. type: TP
#: ../ps/ps.1:886
#, no-wrap
msgid "+"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:889
msgid "is in the foreground process group"
msgstr ""
#. type: SH
#: ../ps/ps.1:891
#, no-wrap
msgid "OBSOLETE SORT KEYS"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:907
msgid "These keys are used by the BSD B<O> option (when it is used for sorting). The GNU B<--sort> option doesn't use these keys, but the specifiers described below in the B<STANDARD FORMAT SPECIFIERS> section. Note that the values used in sorting are the internal values B<ps> uses and not the \"cooked\" values used in some of the output format fields (e.g. sorting on tty will sort into device number, not according to the terminal name displayed). Pipe B<ps> output into the B<sort>(1) command if you want to sort the cooked values."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:909
#, no-wrap
msgid "B<KEY>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:909
#, no-wrap
msgid "B<LONG>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:909
#, fuzzy, no-wrap
#| msgid "DESCRIPTION"
msgid "B<DESCRIPTION>"
msgstr "BESKRIVNING"
#. type: tbl table
#: ../ps/ps.1:910 ../ps/ps.1:1150
#, no-wrap
msgid "cmd"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:910
#, no-wrap
msgid "simple name of executable"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:911 ../ps/ps.1:1075
#, no-wrap
msgid "C"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:911 ../ps/ps.1:953 ../ps/ps.1:1434
#, no-wrap
msgid "pcpu"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:911
#, fuzzy, no-wrap
#| msgid "cache utilization"
msgid "cpu utilization"
msgstr "cacheanvändning"
#. type: tbl table
#: ../ps/ps.1:912 ../ps/ps.1:1262
#, no-wrap
msgid "f"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:912 ../ps/ps.1:1288
#, no-wrap
msgid "flags"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:912
#, no-wrap
msgid "flags as in long format F field"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:913
#, no-wrap
msgid "g"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:913 ../ps/ps.1:1461
#, no-wrap
msgid "pgrp"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:913
#, no-wrap
msgid "process group ID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:914
#, no-wrap
msgid "G"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:914 ../ps/ps.1:1777
#, no-wrap
msgid "tpgid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:914
#, no-wrap
msgid "controlling tty process group ID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:915
#, no-wrap
msgid "j"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:915
#, no-wrap
msgid "cutime"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:915
#, no-wrap
msgid "cumulative user time"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:916
#, no-wrap
msgid "J"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:916
#, no-wrap
msgid "cstime"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:916
#, no-wrap
msgid "cumulative system time"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:917
#, no-wrap
msgid "k"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:917
#, no-wrap
msgid "utime"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:917
#, no-wrap
msgid "user time"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:918
#, no-wrap
msgid "m"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:918 ../ps/ps.1:1381
#, no-wrap
msgid "min_flt"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:918
#, fuzzy, no-wrap
#| msgid "number of objects"
msgid "number of minor page faults"
msgstr "antal objekt"
#. type: tbl table
#: ../ps/ps.1:919
#, no-wrap
msgid "M"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:919 ../ps/ps.1:1377
#, no-wrap
msgid "maj_flt"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:919
#, fuzzy, no-wrap
#| msgid "number of objects"
msgid "number of major page faults"
msgstr "antal objekt"
#. type: tbl table
#: ../ps/ps.1:920
#, no-wrap
msgid "cmin_flt"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:920
#, no-wrap
msgid "cumulative minor page faults"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:921
#, no-wrap
msgid "cmaj_flt"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:921
#, no-wrap
msgid "cumulative major page faults"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:922
#, no-wrap
msgid "session"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:922
#, no-wrap
msgid "session ID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:923 ../ps/ps.1:961 ../ps/ps.1:1468
#, no-wrap
msgid "pid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:923
#, no-wrap
msgid "process ID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:924 ../ps/ps.1:1592
#, no-wrap
msgid "P"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:924 ../ps/ps.1:955 ../ps/ps.1:1512
#, no-wrap
msgid "ppid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:924
#, no-wrap
msgid "parent process ID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:925
#, no-wrap
msgid "r"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:925 ../ps/ps.1:1533
#, no-wrap
msgid "rss"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:925
#, no-wrap
msgid "resident set size"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:926
#, no-wrap
msgid "resident"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:926
#, no-wrap
msgid "resident pages"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:927 ../ps/ps.1:1642
#, no-wrap
msgid "size"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:927
#, no-wrap
msgid "memory size in kilobytes"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:928
#, fuzzy, no-wrap
#| msgid "B<shared>"
msgid "share"
msgstr "B<delat>"
#. type: tbl table
#: ../ps/ps.1:928
#, no-wrap
msgid "amount of shared pages"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:929 ../ps/ps.1:966 ../ps/ps.1:1792
#, no-wrap
msgid "tty"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:929
#, no-wrap
msgid "the device number of the controlling tty"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:930 ../ps/ps.1:1671
#, no-wrap
msgid "start_time"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:930
#, no-wrap
msgid "time process was started"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:931
#, no-wrap
msgid "U"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:931 ../ps/ps.1:1811
#, no-wrap
msgid "uid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:931
#, no-wrap
msgid "user ID number"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:932 ../ps/ps.1:956 ../ps/ps.1:1830
#, fuzzy, no-wrap
#| msgid "B<user >"
msgid "user"
msgstr "B<användare >"
#. type: tbl table
#: ../ps/ps.1:932
#, fuzzy, no-wrap
#| msgid "name"
msgid "user name"
msgstr "namn"
#. type: tbl table
#: ../ps/ps.1:933 ../ps/ps.1:1854
#, no-wrap
msgid "vsize"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:933
#, no-wrap
msgid "total VM size in KiB"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:934
#, no-wrap
msgid "y"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:934
#, no-wrap
msgid "priority"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:934
#, no-wrap
msgid "kernel scheduling priority"
msgstr ""
#. type: SH
#: ../ps/ps.1:937
#, no-wrap
msgid "AIX FORMAT DESCRIPTORS"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:950
msgid "This B<ps> supports AIX format descriptors, which work somewhat like the formatting codes of I<printf>(1) and I<printf>(3). For example, the normal default output can be produced with this: B<ps -eo \"%p %y %x %c\">. The B<NORMAL> codes are described in the next section."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:952
#, no-wrap
msgid "B<CODE>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:952
#, no-wrap
msgid "B<NORMAL>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:952
#, no-wrap
msgid "B<HEADER>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:953
#, no-wrap
msgid "%C"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:953 ../ps/ps.1:1005 ../ps/ps.1:1434
#, no-wrap
msgid "%CPU"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:954
#, no-wrap
msgid "%G"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:954 ../ps/ps.1:1317
#, no-wrap
msgid "group"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:954 ../ps/ps.1:1317
#, no-wrap
msgid "GROUP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:955
#, no-wrap
msgid "%P"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:955 ../ps/ps.1:1512
#, no-wrap
msgid "PPID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:956
#, no-wrap
msgid "%U"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:956 ../ps/ps.1:1818 ../ps/ps.1:1830
#, no-wrap
msgid "USER"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:957
#, fuzzy, no-wrap
#| msgid "a"
msgid "%a"
msgstr "a"
#. type: tbl table
#: ../ps/ps.1:957 ../ps/ps.1:1019
#, no-wrap
msgid "args"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:957 ../ps/ps.1:958 ../ps/ps.1:1019 ../ps/ps.1:1157
#: ../ps/ps.1:1186 ../ps/ps.1:1295 ../ps/ps.1:1804
#, fuzzy, no-wrap
#| msgid "COMMANDS"
msgid "COMMAND"
msgstr "KOMMANDON"
#. type: tbl table
#: ../ps/ps.1:958
#, fuzzy, no-wrap
#| msgid "c"
msgid "%c"
msgstr "c"
#. type: tbl table
#: ../ps/ps.1:958 ../ps/ps.1:1157
#, no-wrap
msgid "comm"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:959
#, no-wrap
msgid "%g"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:959 ../ps/ps.1:1528
#, no-wrap
msgid "rgroup"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:959 ../ps/ps.1:1528
#, no-wrap
msgid "RGROUP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:960
#, fuzzy, no-wrap
#| msgid "n"
msgid "%n"
msgstr "n"
#. type: tbl table
#: ../ps/ps.1:960 ../ps/ps.1:1406
#, no-wrap
msgid "nice"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:960 ../ps/ps.1:1397 ../ps/ps.1:1406
#, no-wrap
msgid "NI"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:961
#, fuzzy, no-wrap
#| msgid "p"
msgid "%p"
msgstr "p"
#. type: tbl table
#: ../ps/ps.1:961 ../ps/ps.1:1468
#, fuzzy, no-wrap
#| msgid "PIDOF"
msgid "PID"
msgstr "PIDOF"
#. type: tbl table
#: ../ps/ps.1:962
#, no-wrap
msgid "%r"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:962 ../ps/ps.1:1455
#, no-wrap
msgid "pgid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:962 ../ps/ps.1:1455
#, no-wrap
msgid "PGID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:963
#, no-wrap
msgid "%t"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:963 ../ps/ps.1:1233
#, no-wrap
msgid "etime"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:963 ../ps/ps.1:1233 ../ps/ps.1:1237
#, no-wrap
msgid "ELAPSED"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:964
#, fuzzy, no-wrap
#| msgid "u"
msgid "%u"
msgstr "u"
#. type: tbl table
#: ../ps/ps.1:964 ../ps/ps.1:1561
#, fuzzy, no-wrap
#| msgid "B<user >"
msgid "ruser"
msgstr "B<användare >"
#. type: tbl table
#: ../ps/ps.1:964 ../ps/ps.1:1561
#, no-wrap
msgid "RUSER"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:965
#, no-wrap
msgid "%x"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:965 ../ps/ps.1:1762
#, no-wrap
msgid "time"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:965 ../ps/ps.1:1069 ../ps/ps.1:1198 ../ps/ps.1:1203
#: ../ps/ps.1:1762 ../ps/ps.1:1767
#, fuzzy, no-wrap
#| msgid "UPTIME"
msgid "TIME"
msgstr "UPTIME"
#. type: tbl table
#: ../ps/ps.1:966
#, no-wrap
msgid "%y"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:966 ../ps/ps.1:1772
#, no-wrap
msgid "TTY"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:967
#, no-wrap
msgid "%z"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:967 ../ps/ps.1:1861
#, no-wrap
msgid "vsz"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:967 ../ps/ps.1:1854 ../ps/ps.1:1861
#, no-wrap
msgid "VSZ"
msgstr ""
#. type: SH
#: ../ps/ps.1:969
#, no-wrap
msgid "STANDARD FORMAT SPECIFIERS"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:976
msgid "Here are the different keywords that may be used to control the output format (e.g., with option B<-o>) or to sort the selected processes with the GNU-style B<--sort> option."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:979
msgid "For example: B<ps -eo pid,\\:user,\\:args --sort user>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:984
msgid "This version of B<ps> tries to recognize most of the keywords used in other implementations of B<ps>."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:989
msgid "The following user-defined format specifiers may contain spaces: B<args>, B<cmd>, B<comm>, B<command>, B<fname>, B<ucmd>, B<ucomm>, B<lstart>, B<bsdstart>, B<start>."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:991
msgid "Some keywords may not be available for sorting."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1003
#, no-wrap
msgid "CODE"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1003
#, no-wrap
msgid "HEADER"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1005
#, no-wrap
msgid "%cpu"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1011
#, no-wrap
msgid ""
"cpu utilization of the process in \"##.#\" format. Currently, it is the CPU\n"
"time used divided by the time the process has been running (cputime/realtime\n"
"ratio), expressed as a percentage. It will not add up to 100% unless you are\n"
"lucky. (alias\n"
"B<pcpu>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1013
#, no-wrap
msgid "%mem"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1013 ../ps/ps.1:1479
#, no-wrap
msgid "%MEM"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1017
#, no-wrap
msgid ""
"ratio of the process's resident set size to the physical memory on the\n"
"machine, expressed as a percentage. (alias\n"
"B<pmem>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1036
#, no-wrap
msgid ""
"command with all its arguments as a string.\n"
"Modifications to the arguments may be shown.\n"
"The output in this column may contain spaces.\n"
"A process marked E<lt>defunctE<gt> is partly dead,\n"
"waiting to be fully destroyed by its parent.\n"
"Sometimes the process args will be unavailable; when this happens,\n"
"B<ps>\n"
"will instead print the executable name in brackets. (alias\n"
"B<cmd>, B<command>).\n"
"See also the\n"
"B<comm>\n"
"format keyword, the\n"
"B<-f>\n"
"option, and the\n"
"B<c>\n"
"option.\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1036 ../ps/ps.1:1105 ../ps/ps.1:1107 ../ps/ps.1:1109
#: ../ps/ps.1:1111 ../ps/ps.1:1113 ../ps/ps.1:1115 ../ps/ps.1:1117
#: ../ps/ps.1:1119 ../ps/ps.1:1131 ../ps/ps.1:1133 ../ps/ps.1:1135
#: ../ps/ps.1:1137 ../ps/ps.1:1139 ../ps/ps.1:1141 ../ps/ps.1:1143
#: ../ps/ps.1:1145 ../ps/ps.1:1170 ../ps/ps.1:1493 ../ps/ps.1:1495
#: ../ps/ps.1:1497 ../ps/ps.1:1499 ../ps/ps.1:1501 ../ps/ps.1:1503
#: ../ps/ps.1:1505 ../ps/ps.1:1507
#, no-wrap
msgid ".br\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1052
#, no-wrap
msgid ""
"When specified last, this column will extend to the edge of the display. If\n"
"B<ps>\n"
"can not determine display width, as when output is redirected (piped) into a\n"
"file or another command, the output width is undefined (it may be 80,\n"
"unlimited, determined by the\n"
"B<TERM>\n"
"variable, and so on). The\n"
"B<COLUMNS>\n"
"environment variable or\n"
"B<--cols>\n"
"option may be used to exactly determine the width in this case. The\n"
"B<w>\n"
"or\n"
"B<-w>\n"
"option may be also be used to adjust width."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1054
#, no-wrap
msgid "blocked"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1054 ../ps/ps.1:1635
#, no-wrap
msgid "BLOCKED"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1060
#, no-wrap
msgid ""
"mask of the blocked signals, see\n"
"I<signal>(7).\n"
"According to the width of the field, a 32 or 64-bit mask in hexadecimal\n"
"format is displayed. (alias\n"
"B<sig_block>, B<sigmask>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1062
#, no-wrap
msgid "bsdstart"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1062 ../ps/ps.1:1671
#, no-wrap
msgid "START"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1067
#, no-wrap
msgid ""
"time the command started. If the process was started less than 24 hours ago,\n"
"the output format is \"\\ HH:MM\", else it is \" Mmm:SS\" (where Mmm is the three\n"
"letters of the month). See also\n"
"B<lstart>, B<start>, B<start_time>, and B<stime>."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1069
#, no-wrap
msgid "bsdtime"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1073
#, no-wrap
msgid ""
"accumulated cpu time, user + system. The display format is usually\n"
"\"MMM:SS\", but can be shifted to the right if the process used more than 999\n"
"minutes of cpu time."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1080
#, no-wrap
msgid ""
"processor utilization.\n"
"Currently, this is the integer value of the percent usage over the\n"
"lifetime of the process. (see\n"
"B<%cpu>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1082
#, no-wrap
msgid "caught"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1082 ../ps/ps.1:1621
#, no-wrap
msgid "CAUGHT"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1088
#, no-wrap
msgid ""
"mask of the caught signals, see\n"
"I<signal>(7).\n"
"According to the width of the field, a 32 or 64 bits mask in hexadecimal\n"
"format is displayed. (alias\n"
"B<sig_catch>, B<sigcatch>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1090
#, fuzzy, no-wrap
#| msgid "name"
msgid "cgname"
msgstr "namn"
#. type: tbl table
#: ../ps/ps.1:1090
#, fuzzy, no-wrap
#| msgid "NAME"
msgid "CGNAME"
msgstr "NAMN"
#. type: tbl table
#: ../ps/ps.1:1092
#, no-wrap
msgid "display name of control groups to which the process belongs."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1094
#, no-wrap
msgid "cgroup"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1094
#, no-wrap
msgid "CGROUP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1096
#, no-wrap
msgid "display control groups to which the process belongs."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1098
#, no-wrap
msgid "class"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1098 ../ps/ps.1:1124
#, no-wrap
msgid "CLS"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1102 ../ps/ps.1:1128
#, no-wrap
msgid ""
"scheduling class of the process. (alias\n"
"B<policy>, B<cls>).\n"
"Field's possible values are:\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1102 ../ps/ps.1:1128 ../ps/ps.1:1490
#, no-wrap
msgid ".sp 1\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1103 ../ps/ps.1:1129 ../ps/ps.1:1491
#, no-wrap
msgid ".in +9n\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1105 ../ps/ps.1:1131 ../ps/ps.1:1493
#, no-wrap
msgid "-\tnot reported\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1107 ../ps/ps.1:1133 ../ps/ps.1:1495
#, no-wrap
msgid "TS\tSCHED_OTHER\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1109 ../ps/ps.1:1135 ../ps/ps.1:1497
#, no-wrap
msgid "FF\tSCHED_FIFO\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1111 ../ps/ps.1:1137 ../ps/ps.1:1499
#, no-wrap
msgid "RR\tSCHED_RR\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1113 ../ps/ps.1:1139 ../ps/ps.1:1501
#, no-wrap
msgid "B\tSCHED_BATCH\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1115 ../ps/ps.1:1141 ../ps/ps.1:1503
#, no-wrap
msgid "ISO\tSCHED_ISO\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1117 ../ps/ps.1:1143 ../ps/ps.1:1505
#, no-wrap
msgid "IDL\tSCHED_IDLE\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1119 ../ps/ps.1:1145 ../ps/ps.1:1507
#, no-wrap
msgid "DLN\tSCHED_DEADLINE\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1121 ../ps/ps.1:1147 ../ps/ps.1:1509
#, fuzzy, no-wrap
#| msgid "token = value\n"
msgid "?\tunknown value\n"
msgstr "symbol = värde\n"
#. type: tbl table
#: ../ps/ps.1:1121 ../ps/ps.1:1147 ../ps/ps.1:1509
#, no-wrap
msgid ".in\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1124
#, no-wrap
msgid "cls"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1150 ../ps/ps.1:1797
#, no-wrap
msgid "CMD"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1155
#, no-wrap
msgid ""
"see\n"
"B<args>.\n"
"(alias\n"
"B<args>, B<command>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1170
#, no-wrap
msgid ""
"command name (only the executable name). Modifications to the command name\n"
"will not be shown. A process marked E<lt>defunctE<gt> is partly dead, waiting to be\n"
"fully destroyed by its parent. The output in this column may contain spaces.\n"
"(alias\n"
"B<ucmd>, B<ucomm>).\n"
"See also the\n"
"B<args>\n"
"format keyword, the\n"
"B<-f>\n"
"option, and the\n"
"B<c>\n"
"option.\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1184
#, no-wrap
msgid ""
"When specified last, this column will extend to the edge of the display. If\n"
"B<ps>\n"
"can not determine display width, as when output is redirected (piped) into a\n"
"file or another command, the output width is undefined (it may be 80,\n"
"unlimited, determined by the\n"
"B<TERM>\n"
"variable, and so on). The\n"
"B<COLUMNS>\n"
"environment variable or\n"
"B<--cols>\n"
"option may be used to exactly determine the width in this case. The\n"
"B<w>\\ orB<\\ -w>\n"
"option may be also be used to adjust width."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1186
#, fuzzy, no-wrap
#| msgid "User Commands"
msgid "command"
msgstr "Användarkommandon"
#. type: tbl table
#: ../ps/ps.1:1191
#, no-wrap
msgid ""
"See\n"
"B<args>.\n"
"(alias\n"
"B<args>, B<command>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1193
#, fuzzy, no-wrap
#| msgid "c"
msgid "cp"
msgstr "c"
#. type: tbl table
#: ../ps/ps.1:1193
#, fuzzy, no-wrap
#| msgid "CPU"
msgid "CP"
msgstr "CPU"
#. type: tbl table
#: ../ps/ps.1:1196
#, no-wrap
msgid ""
"per-mill (tenths of a percent) CPU usage. (see\n"
"B<%cpu>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1198
#, no-wrap
msgid "cputime"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1201
#, no-wrap
msgid ""
"cumulative CPU time, \"[DD-]hh:mm:ss\" format. (alias\n"
"B<time>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1203
#, no-wrap
msgid "cputimes"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1206
#, no-wrap
msgid ""
"cumulative CPU time in seconds (alias\n"
"B<times>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1208
#, no-wrap
msgid "drs"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1208
#, no-wrap
msgid "DRS"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1211
#, no-wrap
msgid ""
"data resident set size, the amount of physical memory devoted to other than\n"
"executable code."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1213
#, no-wrap
msgid "egid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1213
#, no-wrap
msgid "EGID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1216
#, no-wrap
msgid ""
"effective group ID number of the process as a decimal integer. (alias\n"
"B<gid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1218
#, no-wrap
msgid "egroup"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1218
#, no-wrap
msgid "EGROUP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1223
#, no-wrap
msgid ""
"effective group ID of the process. This will be the textual group ID, if it\n"
"can be obtained and the field width permits, or a decimal representation\n"
"otherwise. (alias\n"
"B<group>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1225
#, no-wrap
msgid "eip"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1225
#, no-wrap
msgid "EIP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1227
#, no-wrap
msgid "instruction pointer."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1229
#, no-wrap
msgid "esp"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1229
#, no-wrap
msgid "ESP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1231
#, no-wrap
msgid "stack pointer."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1235
#, no-wrap
msgid "elapsed time since the process was started, in the form [[DD-]hh:]mm:ss."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1237
#, no-wrap
msgid "etimes"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1239
#, no-wrap
msgid "elapsed time since the process was started, in seconds."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1241
#, no-wrap
msgid "euid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1241
#, no-wrap
msgid "EUID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1244
#, no-wrap
msgid ""
"effective user ID (alias\n"
"B<uid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1246
#, fuzzy, no-wrap
#| msgid "B<user >"
msgid "euser"
msgstr "B<användare >"
#. type: tbl table
#: ../ps/ps.1:1246
#, no-wrap
msgid "EUSER"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1252
#, no-wrap
msgid ""
"effective user name. This will be the textual user ID, if it can be obtained\n"
"and the field width permits, or a decimal representation otherwise. The\n"
"B<n>\n"
"option can be used to force the decimal representation. (alias\n"
"B<uname>, B<user>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1254
#, no-wrap
msgid "exe"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1254
#, fuzzy, no-wrap
#| msgid "EXAMPLE"
msgid "EXE"
msgstr "EXEMPEL"
#. type: tbl table
#: ../ps/ps.1:1260
#, no-wrap
msgid ""
"path to the executable. Useful if path cannot be printed via\n"
"B<cmd>, B<comm>\n"
"or\n"
"B<args>\n"
"format options."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1262 ../ps/ps.1:1281 ../ps/ps.1:1288
#, no-wrap
msgid "F"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1267
#, no-wrap
msgid ""
"flags associated with the process, see the\n"
"B<PROCESS FLAGS>\n"
"section. (alias\n"
"B<flag>, B<flags>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1269
#, no-wrap
msgid "fgid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1269
#, no-wrap
msgid "FGID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1272
#, no-wrap
msgid ""
"filesystem access group\\ ID. (alias\n"
"B<fsgid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1274
#, no-wrap
msgid "fgroup"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1274
#, no-wrap
msgid "FGROUP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1279
#, no-wrap
msgid ""
"filesystem access group ID. This will be the textual group ID, if it can\n"
"be obtained and the field width permits, or a decimal representation\n"
"otherwise. (alias\n"
"B<fsgroup>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1281
#, no-wrap
msgid "flag"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1286
#, no-wrap
msgid ""
"see\n"
"B<f>.\n"
"(alias\n"
"B<f>, B<flags>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1293
#, no-wrap
msgid ""
"see\n"
"B<f>.\n"
"(alias\n"
"B<f>, B<flag>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1295
#, fuzzy, no-wrap
#| msgid "name"
msgid "fname"
msgstr "namn"
#. type: tbl table
#: ../ps/ps.1:1298
#, no-wrap
msgid ""
"first 8 bytes of the base name of the process's executable file. The output\n"
"in this column may contain spaces."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1300
#, no-wrap
msgid "fuid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1300
#, no-wrap
msgid "FUID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1303
#, no-wrap
msgid ""
"filesystem access user ID. (alias\n"
"B<fsuid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1305
#, fuzzy, no-wrap
#| msgid "B<user >"
msgid "fuser"
msgstr "B<användare >"
#. type: tbl table
#: ../ps/ps.1:1305
#, no-wrap
msgid "FUSER"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1308
#, no-wrap
msgid ""
"filesystem access user ID. This will be the textual user ID, if it can be\n"
"obtained and the field width permits, or a decimal representation otherwise."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1310
#, no-wrap
msgid "gid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1310
#, no-wrap
msgid "GID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1315
#, no-wrap
msgid ""
"see\n"
"B<egid>.\n"
"(alias\n"
"B<egid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1322
#, no-wrap
msgid ""
"see\n"
"B<egroup>.\n"
"(alias\n"
"B<egroup>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1324
#, no-wrap
msgid "ignored"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1324 ../ps/ps.1:1628
#, no-wrap
msgid "IGNORED"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1330
#, no-wrap
msgid ""
"mask of the ignored signals, see\n"
"I<signal>(7).\n"
"According to the width of the field, a 32 or 64 bits mask in hexadecimal\n"
"format is displayed. (alias\n"
"B<sig_ignore>, B<sigignore>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1332
#, no-wrap
msgid "ipcns"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1332
#, no-wrap
msgid "IPCNS"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1336 ../ps/ps.1:1389 ../ps/ps.1:1395 ../ps/ps.1:1477
#: ../ps/ps.1:1841 ../ps/ps.1:1847
#, no-wrap
msgid ""
"Unique inode number describing the namespace the process belongs to.\n"
"See\n"
"I<namespaces>(7)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1338
#, no-wrap
msgid "label"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1338
#, no-wrap
msgid "LABEL"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1343
#, no-wrap
msgid ""
"security label, most commonly used for SELinux context data. This is for\n"
"the\n"
"I<Mandatory Access Control>\n"
"(\"MAC\") found on high-security systems."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1345
#, no-wrap
msgid "lstart"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1345 ../ps/ps.1:1664
#, no-wrap
msgid "STARTED"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1348
#, no-wrap
msgid ""
"time the command started. See also\n"
"B<bsdstart>, B<start>, B<start_time>, and B<stime>."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1350
#, no-wrap
msgid "lsession"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1350
#, no-wrap
msgid "SESSION"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1353
#, no-wrap
msgid ""
"displays the login session identifier of a process,\n"
"if systemd support has been included."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1355
#, no-wrap
msgid "luid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1355
#, no-wrap
msgid "LUID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1357
#, no-wrap
msgid "displays Login ID associated with a process."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1359
#, no-wrap
msgid "lwp"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1359
#, no-wrap
msgid "LWP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1365
#, no-wrap
msgid ""
"light weight process (thread) ID of the dispatchable entity (alias\n"
"B<spid>, B<tid>).\n"
"See\n"
"B<tid>\n"
"for additional information."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1367
#, no-wrap
msgid "lxc"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1367
#, no-wrap
msgid "LXC"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1370
#, no-wrap
msgid ""
"The name of the lxc container within which a task is running.\n"
"If a process is not running inside a container, a dash ('-') will be shown."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1372
#, no-wrap
msgid "machine"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1372
#, no-wrap
msgid "MACHINE"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1375
#, no-wrap
msgid ""
"displays the machine name for processes assigned to VM or container,\n"
"if systemd support has been included."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1377
#, no-wrap
msgid "MAJFLT"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1379
#, no-wrap
msgid "The number of major page faults that have occurred with this process."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1381
#, no-wrap
msgid "MINFLT"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1383
#, no-wrap
msgid "The number of minor page faults that have occurred with this process."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1385
#, no-wrap
msgid "mntns"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1385
#, no-wrap
msgid "MNTNS"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1391
#, no-wrap
msgid "netns"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1391
#, no-wrap
msgid "NETNS"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1397
#, fuzzy, no-wrap
#| msgid "n"
msgid "ni"
msgstr "n"
#. type: tbl table
#: ../ps/ps.1:1404
#, no-wrap
msgid ""
"nice value.\n"
"This ranges from 19 (nicest) to -20 (not nice to others),\n"
"see\n"
"I<nice>(1).\n"
"(alias\n"
"B<nice>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1410
#, no-wrap
msgid ""
"see\n"
"B<ni>.B<(alias>\n"
"B<ni>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1412
#, no-wrap
msgid "nlwp"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1412
#, no-wrap
msgid "NLWP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1415
#, no-wrap
msgid ""
"number of lwps (threads) in the process. (alias\n"
"B<thcount>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1417
#, no-wrap
msgid "numa"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1417
#, no-wrap
msgid "NUMA"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1420
#, no-wrap
msgid ""
"The node associated with the most recently used processor.\n"
"A I<-1> means that NUMA information is unavailable."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1422
#, no-wrap
msgid "nwchan"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1422 ../ps/ps.1:1867
#, no-wrap
msgid "WCHAN"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1427
#, no-wrap
msgid ""
"address of the kernel function where the process is sleeping (use\n"
"B<wchan>\n"
"if you want the kernel function name). Running tasks will display a dash\n"
"('-') in this column."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1429
#, no-wrap
msgid "ouid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1429
#, no-wrap
msgid "OWNER"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1432
#, no-wrap
msgid ""
"displays the Unix user identifier of the owner of the session of a process,\n"
"if systemd support has been included."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1439
#, no-wrap
msgid ""
"see\n"
"B<%cpu>.\n"
"(alias\n"
"B<%cpu>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1441
#, no-wrap
msgid "pending"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1441 ../ps/ps.1:1614
#, no-wrap
msgid "PENDING"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1453
#, no-wrap
msgid ""
"mask of the pending signals.\n"
"See\n"
"I<signal>(7).\n"
"Signals pending on the process are distinct from signals pending on\n"
"individual threads. Use the\n"
"B<m>\n"
"option or the\n"
"B<-m>\n"
"option to see both. According to the width of the field, a 32 or 64 bits\n"
"mask in hexadecimal format is displayed. (alias\n"
"B<sig>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1459
#, no-wrap
msgid ""
"process group ID or, equivalently, the process ID of the process group\n"
"leader. (alias\n"
"B<pgrp>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1461
#, no-wrap
msgid "PGRP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1466
#, no-wrap
msgid ""
"see\n"
"B<pgid>.\n"
"(alias\n"
"B<pgid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1471
#, no-wrap
msgid ""
"a number representing the process ID (alias\n"
"B<tgid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1473
#, no-wrap
msgid "pidns"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1473
#, no-wrap
msgid "PIDNS"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1479
#, no-wrap
msgid "pmem"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1484
#, no-wrap
msgid ""
"see\n"
"B<%mem>.\n"
"(alias\n"
"B<%mem>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1486
#, no-wrap
msgid "policy"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1486
#, no-wrap
msgid "POL"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1490
#, no-wrap
msgid ""
"scheduling class of the process. (alias\n"
"B<class>, B<cls>).\n"
"Possible values are:\n"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1514
#, no-wrap
msgid "parent process ID."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1516
#, no-wrap
msgid "pri"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1516
#, no-wrap
msgid "PRI"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1518
#, no-wrap
msgid "priority of the process. Higher number means lower priority."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1520
#, no-wrap
msgid "psr"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1520
#, no-wrap
msgid "PSR"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1522
#, no-wrap
msgid "processor that process is currently assigned to."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1524
#, no-wrap
msgid "rgid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1524
#, no-wrap
msgid "RGID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1526
#, no-wrap
msgid "real group ID."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1531
#, no-wrap
msgid ""
"real group name. This will be the textual group ID, if it can be obtained\n"
"and the field width permits, or a decimal representation otherwise."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1533 ../ps/ps.1:1539
#, no-wrap
msgid "RSS"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1537
#, no-wrap
msgid ""
"resident set size, the non-swapped physical memory that a task has used (in\n"
"kilobytes). (alias\n"
"B<rssize>, B<rsz>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1539
#, no-wrap
msgid "rssize"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1544
#, no-wrap
msgid ""
"see\n"
"B<rss>.\n"
"(alias\n"
"B<rss>, B<rsz>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1546
#, no-wrap
msgid "rsz"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1546
#, no-wrap
msgid "RSZ"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1551
#, no-wrap
msgid ""
"see\n"
"B<rss>.\n"
"(alias\n"
"B<rss>, B<rssize>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1553
#, no-wrap
msgid "rtprio"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1553
#, no-wrap
msgid "RTPRIO"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1555
#, no-wrap
msgid "realtime priority."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1557
#, no-wrap
msgid "ruid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1557
#, no-wrap
msgid "RUID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1559
#, no-wrap
msgid "real user ID."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1564
#, no-wrap
msgid ""
"real user ID. This will be the textual user ID, if it can be obtained and\n"
"the field width permits, or a decimal representation otherwise."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1573
#, no-wrap
msgid ""
"minimal state display (one character). See section\n"
"B<PROCESS STATE CODES>\n"
"for the different values. See also\n"
"B<stat>\n"
"if you want additional information displayed. (alias\n"
"B<state>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1575
#, no-wrap
msgid "sched"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1575
#, no-wrap
msgid "SCH"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1579
#, no-wrap
msgid ""
"scheduling policy of the process. The policies SCHED_OTHER (SCHED_NORMAL),\n"
"SCHED_FIFO, SCHED_RR, SCHED_BATCH, SCHED_ISO, SCHED_IDLE and SCHED_DEADLINE are\n"
"respectively displayed as 0, 1, 2, 3, 4, 5 and 6."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1581
#, no-wrap
msgid "seat"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1581
#, no-wrap
msgid "SEAT"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1585
#, no-wrap
msgid ""
"displays the identifier associated with all hardware devices assigned\n"
"to a specific workplace,\n"
"if systemd support has been included."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1587
#, no-wrap
msgid "sess"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1587
#, no-wrap
msgid "SESS"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1590
#, no-wrap
msgid ""
"session ID or, equivalently, the process ID of the session leader. (alias\n"
"B<session>, B<sid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1592
#, no-wrap
msgid "sgi_p"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1595
#, no-wrap
msgid ""
"processor that the process is currently executing on. Displays \"*\" if the\n"
"process is not currently running or runnable."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1597
#, no-wrap
msgid "sgid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1597
#, no-wrap
msgid "SGID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1600
#, no-wrap
msgid ""
"saved group ID. (alias\n"
"B<svgid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1602
#, no-wrap
msgid "sgroup"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1602
#, no-wrap
msgid "SGROUP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1605
#, no-wrap
msgid ""
"saved group name. This will be the textual group ID, if it can be obtained\n"
"and the field width permits, or a decimal representation otherwise."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1607
#, no-wrap
msgid "sid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1607
#, no-wrap
msgid "SID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1612
#, no-wrap
msgid ""
"see\n"
"B<sess>.\n"
"(alias\n"
"B<sess>, B<session>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1614
#, no-wrap
msgid "sig"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1619
#, no-wrap
msgid ""
"see\n"
"B<pending>.\n"
"(alias\n"
"B<pending>, B<sig_pend>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1621
#, no-wrap
msgid "sigcatch"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1626
#, no-wrap
msgid ""
"see\n"
"B<caught>.\n"
"(alias\n"
"B<caught>, B<sig_catch>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1628
#, no-wrap
msgid "sigignore"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1633
#, no-wrap
msgid ""
"see\n"
"B<ignored>.\n"
"(alias\n"
"B<ignored>, B<sig_ignore>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1635
#, no-wrap
msgid "sigmask"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1640
#, no-wrap
msgid ""
"see\n"
"B<blocked>.\n"
"(alias\n"
"B<blocked>, B<sig_block>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1642
#, fuzzy, no-wrap
#| msgid "OBJ SIZE"
msgid "SIZE"
msgstr "OBJ-STRL"
#. type: tbl table
#: ../ps/ps.1:1646
#, no-wrap
msgid ""
"approximate amount of swap space that would be required if the process were\n"
"to dirty all writable pages and then be swapped out. This number is very\n"
"rough!"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1648
#, no-wrap
msgid "slice"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1648
#, no-wrap
msgid "SLICE"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1651
#, no-wrap
msgid ""
"displays the slice unit which a process belongs to,\n"
"if systemd support has been included."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1653
#, no-wrap
msgid "spid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1653
#, no-wrap
msgid "SPID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1658
#, no-wrap
msgid ""
"see\n"
"B<lwp>.\n"
"(alias\n"
"B<lwp>, B<tid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1660
#, no-wrap
msgid "stackp"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1660
#, no-wrap
msgid "STACKP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1662
#, no-wrap
msgid "address of the bottom (start) of stack for the process."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1664
#, no-wrap
msgid "start"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1669
#, no-wrap
msgid ""
"time the command started. If the process was started less than 24 hours ago,\n"
"the output format is \"HH:MM:SS\", else it is \"\\ \\ Mmm\\ dd\" (where Mmm is a\n"
"three-letter month name). See also\n"
"B<lstart>, B<bsdstart>, B<start_time>, and B<stime>."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1678
#, no-wrap
msgid ""
"starting time or date of the process. Only the year will be displayed if the\n"
"process was not started the same year\n"
"B<ps>\n"
"was invoked, or \"MmmDD\" if it was not started the same day, or \"HH:MM\"\n"
"otherwise. See also\n"
"B<bsdstart>, B<start>, B<lstart>, and B<stime>."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1680
#, no-wrap
msgid "stat"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1680
#, fuzzy, no-wrap
#| msgid "VMSTAT"
msgid "STAT"
msgstr "VMSTAT"
#. type: tbl table
#: ../ps/ps.1:1686
#, no-wrap
msgid ""
"multi-character process state. See section\n"
"B<PROCESS STATE CODES>\n"
"for the different values meaning. See also\n"
"B<s>\\ andB<\\ state>\n"
"if you just want the first character displayed."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1688
#, no-wrap
msgid "state"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1691
#, no-wrap
msgid ""
"see\n"
"B<s>.\\& (aliasB<\\ s>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1693
#, no-wrap
msgid "stime"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1693
#, fuzzy, no-wrap
#| msgid "UPTIME"
msgid "STIME"
msgstr "UPTIME"
#. type: tbl table
#: ../ps/ps.1:1695
#, no-wrap
msgid "see B<start_time>. (alias B<start_time>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1697
#, no-wrap
msgid "suid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1697
#, no-wrap
msgid "SUID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1700
#, no-wrap
msgid ""
"saved user ID. (alias\n"
"B<svuid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1702
#, no-wrap
msgid "supgid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1702
#, no-wrap
msgid "SUPGID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1705
#, no-wrap
msgid ""
"group ids of supplementary groups, if any. See\n"
"B<getgroups>(2)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1707
#, no-wrap
msgid "supgrp"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1707
#, no-wrap
msgid "SUPGRP"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1710
#, no-wrap
msgid ""
"group names of supplementary groups, if any. See\n"
"B<getgroups>(2)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1712
#, fuzzy, no-wrap
#| msgid "B<user >"
msgid "suser"
msgstr "B<användare >"
#. type: tbl table
#: ../ps/ps.1:1712
#, no-wrap
msgid "SUSER"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1716
#, no-wrap
msgid ""
"saved user name. This will be the textual user ID, if it can be obtained and\n"
"the field width permits, or a decimal representation otherwise. (alias\n"
"B<svuser>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1718
#, no-wrap
msgid "svgid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1718
#, no-wrap
msgid "SVGID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1723
#, no-wrap
msgid ""
"see\n"
"B<sgid>.\n"
"(alias\n"
"B<sgid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1725
#, no-wrap
msgid "svuid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1725
#, no-wrap
msgid "SVUID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1730
#, no-wrap
msgid ""
"see\n"
"B<suid>.\n"
"(alias\n"
"B<suid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1732
#, fuzzy, no-wrap
#| msgid "s"
msgid "sz"
msgstr "s"
#. type: tbl table
#: ../ps/ps.1:1732
#, no-wrap
msgid "SZ"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1737
#, no-wrap
msgid ""
"size in physical pages of the core image of the process. This includes text,\n"
"data, and stack space. Device mappings are currently excluded; this is\n"
"subject to change. See\n"
"B<vsz>\\ andB<\\ rss>."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1739
#, no-wrap
msgid "tgid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1739
#, no-wrap
msgid "TGID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1743
#, no-wrap
msgid ""
"a number representing the thread group to which a task belongs (alias\n"
"B<pid>).\n"
"It is the process ID of the thread group leader."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1745
#, fuzzy, no-wrap
#| msgid "I<count>"
msgid "thcount"
msgstr "I<antal>"
#. type: tbl table
#: ../ps/ps.1:1745
#, no-wrap
msgid "THCNT"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1751
#, no-wrap
msgid ""
"see\n"
"B<nlwp>.\n"
"(alias\n"
"B<nlwp>).\n"
"number of kernel threads owned by the process."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1753
#, no-wrap
msgid "tid"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1753
#, no-wrap
msgid "TID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1760
#, no-wrap
msgid ""
"the unique number representing a dispatchable entity (alias\n"
"B<lwp>, B<spid>).\n"
"This value may also appear as: a process ID (pid); a process group ID (pgrp);\n"
"a session ID for the session leader (sid); a thread group ID for the thread\n"
"group leader (tgid); and a tty process group ID for the process group leader\n"
"(tpgid)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1765
#, no-wrap
msgid ""
"cumulative CPU\\ time, \"[DD-]HH:MM:SS\" format. (alias\n"
"B<cputime>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1767
#, no-wrap
msgid "times"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1770
#, no-wrap
msgid ""
"cumulative CPU\\ time in seconds (alias\n"
"B<cputimes>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1772
#, fuzzy, no-wrap
#| msgid "name"
msgid "tname"
msgstr "namn"
#. type: tbl table
#: ../ps/ps.1:1775
#, no-wrap
msgid ""
"controlling tty (terminal). (alias\n"
"B<tt>, B<tty>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1777
#, no-wrap
msgid "TPGID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1780
#, no-wrap
msgid ""
"ID of the foreground process group on the tty (terminal) that the process is\n"
"connected to, or -1 if the process is not connected to a tty."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1782
#, no-wrap
msgid "trs"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1782
#, fuzzy, no-wrap
#| msgid "AUTHORS"
msgid "TRS"
msgstr "UPPHOVSMÄN"
#. type: tbl table
#: ../ps/ps.1:1785
#, no-wrap
msgid ""
"text resident set size,\n"
"the amount of physical memory devoted to executable code."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1787
#, no-wrap
msgid "tt"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1787 ../ps/ps.1:1792
#, no-wrap
msgid "TT"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1790
#, no-wrap
msgid ""
"controlling tty (terminal). (alias\n"
"B<tname>, B<tty>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1795
#, no-wrap
msgid ""
"controlling tty (terminal). (alias\n"
"B<tname>, B<tt>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1797
#, no-wrap
msgid "ucmd"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1802
#, no-wrap
msgid ""
"see\n"
"B<comm>.\n"
"(alias\n"
"B<comm>, B<ucomm>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1804
#, no-wrap
msgid "ucomm"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1809
#, no-wrap
msgid ""
"see\n"
"B<comm>.\n"
"(alias\n"
"B<comm>, B<ucmd>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1811
#, no-wrap
msgid "UID"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1816
#, no-wrap
msgid ""
"see\n"
"B<euid>.\n"
"(alias\n"
"B<euid>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1818
#, fuzzy, no-wrap
#| msgid "name"
msgid "uname"
msgstr "namn"
#. type: tbl table
#: ../ps/ps.1:1823
#, no-wrap
msgid ""
"see\n"
"B<euser>.\n"
"(alias\n"
"B<euser>, B<user>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1825
#, no-wrap
msgid "unit"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1825
#, no-wrap
msgid "UNIT"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1828
#, no-wrap
msgid ""
"displays unit which a process belongs to,\n"
"if systemd support has been included."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1835
#, no-wrap
msgid ""
"see\n"
"B<euser>.\n"
"(alias\n"
"B<euser>, B<uname>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1837
#, no-wrap
msgid "userns"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1837
#, no-wrap
msgid "USERNS"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1843
#, no-wrap
msgid "utsns"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1843
#, no-wrap
msgid "UTSNS"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1849
#, no-wrap
msgid "uunit"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1849
#, no-wrap
msgid "UUNIT"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1852
#, no-wrap
msgid ""
"displays user unit which a process belongs to,\n"
"if systemd support has been included."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1859
#, no-wrap
msgid ""
"see\n"
"B<vsz>.\n"
"(alias\n"
"B<vsz>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1865
#, no-wrap
msgid ""
"virtual memory size of the process in KiB (1024-byte units). Device\n"
"mappings are currently excluded; this is subject to change. (alias\n"
"B<vsize>)."
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1867
#, no-wrap
msgid "wchan"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1872
#, no-wrap
msgid ""
"name of the kernel function in which the process is sleeping, a \"-\" if the\n"
"process is running, or a \"*\" if the process is multi-threaded and\n"
"B<ps>\n"
"is not displaying threads."
msgstr ""
#. #######################################################################
#. type: SH
#: ../ps/ps.1:1876
#, fuzzy, no-wrap
#| msgid "ENVIRONMENT"
msgid "ENVIRONMENT VARIABLES"
msgstr "MILJÖ"
#. type: Plain text
#: ../ps/ps.1:1879
msgid "The following environment variables could affect B<ps>:"
msgstr ""
#. type: TP
#: ../ps/ps.1:1879
#, no-wrap
msgid "B<COLUMNS>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1882
msgid "Override default display width."
msgstr ""
#. type: TP
#: ../ps/ps.1:1882
#, no-wrap
msgid "B<LINES>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1885
msgid "Override default display height."
msgstr ""
#. type: TP
#: ../ps/ps.1:1885
#, no-wrap
msgid "B<PS_PERSONALITY>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1890 ../ps/ps.1:1895
msgid "Set to one of posix, old, linux, bsd, sun, digital...\\& (see section B<PERSONALITY> below)."
msgstr ""
#. type: TP
#: ../ps/ps.1:1890
#, no-wrap
msgid "B<CMD_ENV>"
msgstr ""
#. type: TP
#: ../ps/ps.1:1895
#, no-wrap
msgid "B<I_WANT_A_BROKEN_PS>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1898
msgid "Force obsolete command line interpretation."
msgstr ""
#. type: TP
#: ../ps/ps.1:1898
#, no-wrap
msgid "B<LC_TIME>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1901
msgid "Date format."
msgstr ""
#. type: TP
#: ../ps/ps.1:1901
#, no-wrap
msgid "B<PS_COLORS>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1904
msgid "Not currently supported."
msgstr ""
#. type: TP
#: ../ps/ps.1:1904
#, no-wrap
msgid "B<PS_FORMAT>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1915
msgid "Default output format override. You may set this to a format string of the type used for the B<-o> option. The B<DefSysV> and B<DefBSD> values are particularly useful."
msgstr ""
#. type: TP
#: ../ps/ps.1:1915
#, no-wrap
msgid "B<POSIXLY_CORRECT>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1918 ../ps/ps.1:1925
msgid "Don't find excuses to ignore bad \"features\"."
msgstr ""
#. type: TP
#: ../ps/ps.1:1918
#, no-wrap
msgid "B<POSIX2>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1922
msgid "When set to \"on\", acts as B<POSIXLY_CORRECT>."
msgstr ""
#. type: TP
#: ../ps/ps.1:1922
#, no-wrap
msgid "B<UNIX95>"
msgstr ""
#. type: TP
#: ../ps/ps.1:1925
#, no-wrap
msgid "B<_XPG>"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1931
msgid "Cancel B<CMD_ENV>=I<irix> non-standard behavior."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1939
msgid "In general, it is a bad idea to set these variables. The one exception is B<CMD_ENV> or B<PS_PERSONALITY>, which could be set to Linux for normal systems. Without that setting, B<ps> follows the useless and bad parts of the Unix98 standard."
msgstr ""
#. type: SH
#: ../ps/ps.1:1939
#, no-wrap
msgid "PERSONALITY"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1942
#, no-wrap
msgid "390"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1942
#, no-wrap
msgid "like the OS/390 OpenEdition B<ps>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1943
#, no-wrap
msgid "aix"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1943
#, no-wrap
msgid "like AIX B<ps>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1944
#, no-wrap
msgid "bsd"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1944
#, no-wrap
msgid "like FreeBSD B<ps> (totally non-standard)"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1945
#, no-wrap
msgid "compaq"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1945
#, no-wrap
msgid "like Digital Unix B<ps>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1946
#, no-wrap
msgid "debian"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1946 ../ps/ps.1:1948
#, no-wrap
msgid "like the old Debian B<ps>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1947
#, no-wrap
msgid "digital"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1947
#, no-wrap
msgid "like Tru64 (was Digital\\ Unix, was OSF/1) B<ps>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1948
#, no-wrap
msgid "gnu"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1949
#, fuzzy, no-wrap
#| msgid "p"
msgid "hp"
msgstr "p"
#. type: tbl table
#: ../ps/ps.1:1949 ../ps/ps.1:1950
#, no-wrap
msgid "like HP-UX B<ps>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1950
#, no-wrap
msgid "hpux"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1951
#, no-wrap
msgid "irix"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1951 ../ps/ps.1:1958
#, no-wrap
msgid "like Irix B<ps>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1952
#, no-wrap
msgid "linux"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1952
#, no-wrap
msgid "***** B<recommended> *****"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1953
#, no-wrap
msgid "old"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1953
#, no-wrap
msgid "like the original Linux B<ps> (totally non-standard)"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1954
#, no-wrap
msgid "os390"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1954 ../ps/ps.1:1956
#, no-wrap
msgid "like OS/390 Open Edition B<ps>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1955
#, no-wrap
msgid "posix"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1955 ../ps/ps.1:1961 ../ps/ps.1:1962 ../ps/ps.1:1964
#: ../ps/ps.1:1965 ../ps/ps.1:1966
#, no-wrap
msgid "standard"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1956
#, no-wrap
msgid "s390"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1957
#, no-wrap
msgid "sco"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1957
#, no-wrap
msgid "like SCO B<ps>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1958
#, no-wrap
msgid "sgi"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1959
#, no-wrap
msgid "solaris2"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1959
#, no-wrap
msgid "like Solaris 2+ (SunOS 5) B<ps>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1960
#, no-wrap
msgid "sunos4"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1960
#, no-wrap
msgid "like SunOS 4 (Solaris 1) B<ps> (totally non-standard)"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1961
#, no-wrap
msgid "svr4"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1962
#, no-wrap
msgid "sysv"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1963
#, no-wrap
msgid "tru64"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1963
#, no-wrap
msgid "like Tru64 (was Digital Unix, was OSF/1) B<ps>"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1964
#, no-wrap
msgid "unix"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1965
#, no-wrap
msgid "unix95"
msgstr ""
#. type: tbl table
#: ../ps/ps.1:1966
#, no-wrap
msgid "unix98"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1973
#, fuzzy
#| msgid "B<free>(1), B<ps>(1), B<top>(1), B<vmstat>(8)"
msgid "B<pgrep>(1), B<pstree>(1), B<top>(1), B<proc>(5)."
msgstr "B<free>(1), B<ps>(1), B<top>(1), B<vmstat>(8)"
#. type: Plain text
#: ../ps/ps.1:1977
msgid "This B<ps> conforms to:"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1981
msgid "Version 2 of the Single Unix Specification"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1983
msgid "The Open Group Technical Standard Base Specifications, Issue\\ 6"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1985
msgid "IEEE Std 1003.1, 2004\\ Edition"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1987
msgid "X/Open System Interfaces Extension [UP\\ XSI]"
msgstr ""
#. type: IP
#: ../ps/ps.1:1987
#, no-wrap
msgid "5"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:1989
msgid "ISO/IEC 9945:2003"
msgstr ""
#. type: Plain text
#: ../ps/ps.1:2017
msgid "B<ps> was originally written by E<.MT lankeste@\\:fwi.\\:uva.\\:nl> Branko Lankester E<.ME .> E<.MT johnsonm@\\:redhat.\\:com> Michael K.\\& Johnson E<.ME> re-wrote it significantly to use the proc filesystem, changing a few things in the process. E<.MT mjshield@\\:nyx.\\:cs.\\:du.\\:edu> Michael Shields E<.ME> added the pid-list feature. E<.MT cblake@\\:bbn.\\:com> Charles Blake E<.ME> added multi-level sorting, the dirent-style library, the device name-to-number mmaped database, the approximate binary search directly on System.map, and many code and documentation cleanups. David Mossberger-Tang wrote the generic BFD support for psupdate. E<.MT albert@\\:users.\\:sf.\\:net> Albert Cahalan E<.ME> rewrote ps for full Unix98 and BSD support, along with some ugly hacks for obsolete and foreign syntax."
msgstr ""
#. type: Plain text
#: ../ps/ps.1:2021
msgid "Please send bug reports to E<.MT procps@\\:freelists.\\:org> E<.ME .> No subscription is required or suggested."
msgstr ""
"Skicka felrapporter till E<.MT procps@\\:freelists.\\:org> E<.ME .> Ingen prenumeration krävs eller rekommenderas.\n"
"Skicka synpunkter på översättningen till E<.MT tp-sv@listor.tp-sv.se> E<.ME>"
#. Setup ////////////////////////////////////////////////////////////////
#. Commonly used strings (for consistency) ----------
#. - our em-dashes
#. type: ds Em
#: ../top/top.1:11
#, no-wrap
msgid "\\ --\\ "
msgstr ""
#. type: ds EM
#: ../top/top.1:12
#, no-wrap
msgid "B<\\ --\\ >"
msgstr ""
#. - our program name (makes great grammar)
#. type: ds We
#: ../top/top.1:14
#, no-wrap
msgid "top"
msgstr ""
#. type: ds WE
#: ../top/top.1:15
#, fuzzy, no-wrap
#| msgid "B<total>"
msgid "B<top>"
msgstr "B<totalt>"
#. - other misc strs for consistent usage
#. type: ds F
#: ../top/top.1:17
#, no-wrap
msgid "I<Off>"
msgstr ""
#. type: ds O
#: ../top/top.1:18
#, no-wrap
msgid "I<On>"
msgstr ""
#. type: ds AK
#: ../top/top.1:20
#, no-wrap
msgid "asterisk (`*')"
msgstr ""
#. type: ds AM
#: ../top/top.1:21
#, no-wrap
msgid "alternate-display mode"
msgstr ""
#. type: ds AS
#: ../top/top.1:22
#, no-wrap
msgid "auxiliary storage"
msgstr ""
#. type: ds CF
#: ../top/top.1:23
#, fuzzy, no-wrap
#| msgid "Read the configuration from I<file>"
msgid "configuration file"
msgstr "Läs konfigurationen från I<fil>"
#. type: ds CG
#: ../top/top.1:24
#, no-wrap
msgid "`current' window/field group"
msgstr ""
#. type: ds CI
#: ../top/top.1:25
#, no-wrap
msgid "interactive command"
msgstr ""
#. - Note: our 'Command Line' used in 2 places
#. ( and managed to fit in an 80x24 terminal )
#. type: ds CL
#: ../top/top.1:28
#, no-wrap
msgid "-B<hv>|-B<bcEeHiOSs1> -B<d> secs -B<n> max -B<u>|B<U> user -B<p> pids -B<o> field -B<w> [cols] "
msgstr ""
#. type: ds CO
#: ../top/top.1:30
#, no-wrap
msgid "command-line option"
msgstr ""
#. type: ds CT
#: ../top/top.1:31
#, no-wrap
msgid "command toggle"
msgstr ""
#. type: ds CW
#: ../top/top.1:32
#, no-wrap
msgid "`current' window"
msgstr ""
#. type: ds FG
#: ../top/top.1:33
#, no-wrap
msgid "field group"
msgstr ""
#. type: ds FM
#: ../top/top.1:34
#, no-wrap
msgid "full-screen mode"
msgstr ""
#. type: ds KA
#: ../top/top.1:35
#, no-wrap
msgid "arrow key"
msgstr ""
#. type: ds KS
#: ../top/top.1:36
#, no-wrap
msgid "scrolling key"
msgstr ""
#. type: ds MP
#: ../top/top.1:37
#, no-wrap
msgid "physical memory"
msgstr ""
#. type: ds MS
#: ../top/top.1:38
#, no-wrap
msgid "swap file"
msgstr ""
#. type: ds MV
#: ../top/top.1:39
#, no-wrap
msgid "virtual memory"
msgstr ""
#. type: ds NT
#: ../top/top.1:40
#, no-wrap
msgid "B<Note>:"
msgstr ""
#. type: ds Pu
#: ../top/top.1:42
#, no-wrap
msgid "cpu"
msgstr ""
#. type: ds SA
#: ../top/top.1:43
#, no-wrap
msgid "summary area"
msgstr ""
#. type: ds TA
#: ../top/top.1:44
#, no-wrap
msgid "task area"
msgstr ""
#. type: ds TD
#: ../top/top.1:45
#, no-wrap
msgid "task display"
msgstr ""
#. type: ds TT
#: ../top/top.1:46
#, no-wrap
msgid "B<processes> or B<threads>"
msgstr ""
#. type: ds TW
#: ../top/top.1:47
#, no-wrap
msgid "task window"
msgstr ""
#. Reference to the various widths/sizes ------------
#. - the max screen width limit
#. type: ds WX
#: ../top/top.1:50
#, no-wrap
msgid "512"
msgstr ""
#. - the header width w/ all fields
#. type: ds WF
#: ../top/top.1:52
#, no-wrap
msgid "approximately 250"
msgstr ""
#. - pid monitoring limit
#. type: ds WP
#: ../top/top.1:54
#, fuzzy, no-wrap
#| msgid "0"
msgid "20"
msgstr "0"
#. Xref's that depend on/mention other stuff --------
#. type: ds Xa
#: ../top/top.1:56
#, no-wrap
msgid "see"
msgstr ""
#. type: ds XC
#: ../top/top.1:57
#, no-wrap
msgid "See the"
msgstr ""
#. type: ds Xc
#: ../top/top.1:58
#, no-wrap
msgid "see the"
msgstr ""
#. type: ds XT
#: ../top/top.1:59
#, no-wrap
msgid "See topic"
msgstr ""
#. type: ds Xt
#: ../top/top.1:60
#, no-wrap
msgid "see topic"
msgstr ""
#. type: ds XX
#: ../top/top.1:61
#, no-wrap
msgid "See `OVERVIEW, Linux Memory Types' for additional details"
msgstr ""
#. type: TH
#: ../top/top.1:65
#, fuzzy, no-wrap
#| msgid "SLABTOP"
msgid "TOP"
msgstr "SLABTOP"
#. type: TH
#: ../top/top.1:65
#, fuzzy, no-wrap
#| msgid "September 2012"
msgid "September 2020"
msgstr "September 2012"
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:73
msgid "top - display Linux processes"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:78
msgid "\\*(WE \\*(CL"
msgstr ""
#. type: Plain text
#: ../top/top.1:80
msgid "The traditional switches `-' and whitespace are optional."
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:90
msgid "The \\*(WE program provides a dynamic real-time view of a running system. It can displayB< system> summary information as well as a list of \\*(TT currently being managed by the Linux kernel. The types of system summary information shown and the types, order and size of information displayed for processes are all user configurable and that configuration can be made persistent across restarts."
msgstr ""
#. type: Plain text
#: ../top/top.1:98
msgid "The program provides a limited interactive interface for process manipulation as well as a much more extensive interface for personal configuration \\*(Em encompassing every aspect of its operation. And while \\*(WE is referred to throughout this document, you are free to name the program anything you wish. That new name, possibly an alias, will then be reflected on \\*(We's display and used when reading and writing a \\*(CF."
msgstr ""
#. ----------------------------------------------------------------------
#. type: SH
#: ../top/top.1:100
#, no-wrap
msgid "OVERVIEW"
msgstr ""
#. ----------------------------------------------------------------------
#. ......................................................................
#. type: SS
#: ../top/top.1:103
#, no-wrap
msgid "Documentation"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:106
msgid "The remaining Table of Contents"
msgstr ""
#. type: Plain text
#: ../top/top.1:145
#, no-wrap
msgid ""
" OVERVIEW\n"
" Operation\n"
" Linux Memory Types\n"
" 1. COMMAND-LINE Options\n"
" 2. SUMMARY Display\n"
" a. UPTIME and LOAD Averages\n"
" b. TASK and CPU States\n"
" c. MEMORY Usage\n"
" 3. FIELDS / Columns Display\n"
" a. DESCRIPTIONS of Fields\n"
" b. MANAGING Fields\n"
" 4. INTERACTIVE Commands\n"
" a. GLOBAL Commands\n"
" b. SUMMARY AREA Commands\n"
" c. TASK AREA Commands\n"
" 1. Appearance\n"
" 2. Content\n"
" 3. Size\n"
" 4. Sorting\n"
" d. COLOR Mapping\n"
" 5. ALTERNATE-DISPLAY Provisions\n"
" a. WINDOWS Overview\n"
" b. COMMANDS for Windows\n"
" c. SCROLLING a Window\n"
" d. SEARCHING in a Window\n"
" e. FILTERING in a Window\n"
" 6. FILES\n"
" a. PERSONAL Configuration File\n"
" b. ADDING INSPECT Entries\n"
" c. SYSTEM Configuration File\n"
" d. SYSTEM Restrictions File\n"
" 7. STUPID TRICKS Sampler\n"
" a. Kernel Magic\n"
" b. Bouncing Windows\n"
" c. The Big Bird Window\n"
" d. The Ol' Switcheroo\n"
" 8. BUGS, 9. SEE Also\n"
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:148
#, no-wrap
msgid "Operation"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:154
msgid "When operating \\*(We, the two most important keys are the help (h or ?) key and quit (`q') key. Alternatively, you could simply use the traditional interrupt key (^C) when you're done."
msgstr ""
#. type: Plain text
#: ../top/top.1:161
msgid "When started for the first time, you'll be presented with these traditional elements on the main \\*(We screen: 1) Summary Area; 2) Fields/Columns Header; 3) Task Area. Each of these will be explored in the sections that follow. There is also an Input/Message line between the Summary Area and Columns Header which needs no further explanation."
msgstr ""
#. type: Plain text
#: ../top/top.1:169
msgid "The main \\*(We screen is I<generally> quite adaptive to changes in terminal dimensions under X-Windows. Other \\*(We screens may be less so, especially those with static text. It ultimately depends, however, on your particular window manager and terminal emulator. There may be occasions when their view of terminal size and current contents differs from \\*(We's view, which is always based on operating system calls."
msgstr ""
#. type: Plain text
#: ../top/top.1:174
msgid "Following any re-size operation, if a \\*(We screen is corrupted, appears incomplete or disordered, simply typing something innocuous like a punctuation character or cursor motion key will usually restore it. In extreme cases, the following sequence almost certainly will:"
msgstr ""
#. type: Plain text
#: ../top/top.1:179
#, no-wrap
msgid ""
" I<key/cmd objective >\n"
" ^Z B<suspend> \\*(We\n"
" fg B<resume> \\*(We\n"
" E<lt>LeftE<gt> force a screen B<redraw> (if necessary)\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:183
msgid "But if the display is still corrupted, there is one more step you could try. Insert this command after \\*(We has been suspended but before resuming it."
msgstr ""
#. type: Plain text
#: ../top/top.1:186
#, no-wrap
msgid ""
" I<key/cmd objective >\n"
" reset restore your B<terminal settings>\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:196
msgid "\\*(NT the width of \\*(We's display will be limited to \\*(WX positions. Displaying all fields requires \\*(WF characters. Remaining screen width is usually allocated to any variable width columns currently visible. The variable width columns, such as COMMAND, are noted in topic 3a. DESCRIPTIONS of Fields. Actual output width may also be influenced by the -w switch, which is discussed in topic 1. COMMAND-LINE Options."
msgstr ""
#. type: Plain text
#: ../top/top.1:201
msgid "Lastly, some of \\*(We's screens or functions require the use of cursor motion keys like the standard \\*(KAs plus the Home, End, PgUp and PgDn keys. If your terminal or emulator does not provide those keys, the following combinations are accepted as alternatives:"
msgstr ""
#. type: Plain text
#: ../top/top.1:211
#, no-wrap
msgid ""
" I< key equivalent-keys >\n"
" Left alt +B< h >\n"
" Down alt +B< j >\n"
" Up alt +B< k >\n"
" Right alt +B< l >\n"
" Home alt + ctrl +B< h >\n"
" PgDn alt + ctrl +B< j >\n"
" PgUp alt + ctrl +B< k >\n"
" End alt + ctrl +B< l >\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:218
msgid "The B<Up> and B<Down> \\*(KAs have special significance when prompted for line input terminated with the E<lt>EnterE<gt> key. Those keys, or their aliases, can be used to retrieve previous input lines which can then be edited and re-input. And there are four additional keys available with line oriented input."
msgstr ""
#. type: Plain text
#: ../top/top.1:226
#, no-wrap
msgid ""
" I< key special-significance >\n"
" Up recall B<older> strings for re-editing\n"
" Down recall B<newer> strings or B<erase> entire line\n"
" Insert toggle between B<insert> and B<overtype> modes\n"
" Delete character B<removed> at cursor, moving others left\n"
" Home jump to B<beginning> of input line\n"
" End jump to B<end> of input line\n"
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:229
#, no-wrap
msgid "Linux Memory Types"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:238
msgid "For our purposes there are three types of memory, and one is optional. First is \\*(MP, a limited resource where code and data must reside when executed or referenced. Next is the optional \\*(MS, where modified (dirty) memory can be saved and later retrieved if too many demands are made on \\*(MP. Lastly we have \\*(MV, a nearly unlimited resource serving the following goals:"
msgstr ""
#. type: Plain text
#: ../top/top.1:244
#, no-wrap
msgid ""
" 1. abstraction, free from physical memory addresses/limits\n"
" 2. isolation, every process in a separate address space\n"
" 3. sharing, a single mapping can serve multiple needs\n"
" 4. flexibility, assign a virtual address to a file\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:253
msgid "Regardless of which of these forms memory may take, all are managed as pages (typically 4096 bytes) but expressed by default in \\*(We as KiB (kibibyte). The memory discussed under topic `2c. MEMORY Usage' deals with \\*(MP and the \\*(MS for the system as a whole. The memory reviewed in topic `3. FIELDS / Columns Display' embraces all three memory types, but for individual processes."
msgstr ""
#. type: Plain text
#: ../top/top.1:259
msgid "For each such process, every memory page is restricted to a single quadrant from the table below. Both \\*(MP and \\*(MV can include any of the four, while the \\*(MS only includes #1 through #3. The memory in quadrant #4, when modified, acts as its own dedicated \\*(MS."
msgstr ""
#. type: Plain text
#: ../top/top.1:271
#, no-wrap
msgid ""
" B<Private> | B<Shared>\n"
" B<1> | B<2>\n"
" B<Anonymous> . stack |\n"
" . malloc() |\n"
" . brk()/sbrk() | . POSIX shm*\n"
" . mmap(PRIVATE, ANON) | . mmap(SHARED, ANON)\n"
" -----------------------+----------------------\n"
" . mmap(PRIVATE, fd) | . mmap(SHARED, fd)\n"
" B<File-backed> . pgms/shared libs |\n"
" B<3> | B<4>\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:275
msgid "The following may help in interpreting process level memory values displayed as scalable columns and discussed under topic `3a. DESCRIPTIONS of Fields'."
msgstr ""
#. type: Plain text
#: ../top/top.1:292
#, no-wrap
msgid ""
" %MEM - simply RES divided by total \\*(MP\n"
" CODE - the `pgms' portion of quadrant B<3>\n"
" DATA - the entire quadrant B<1> portion of VIRT plus all\n"
" explicit mmap file-backed pages of quadrant B<3>\n"
" RES - anything occupying \\*(MP which, beginning with\n"
" Linux-4.5, is the sum of the following three fields:\n"
" RSan - quadrant B<1> pages, which include any\n"
" former quadrant B<3> pages if modified\n"
" RSfd - quadrant B<3> and quadrant B<4> pages\n"
" RSsh - quadrant B<2> pages\n"
" RSlk - subset of RES which cannot be swapped out (any quadrant)\n"
" SHR - subset of RES (excludes B<1>, includes all B<2> & B<4>, some B<3>)\n"
" SWAP - potentially any quadrant except B<4>\n"
" USED - simply the sum of RES and SWAP\n"
" VIRT - everything in-use and/or reserved (all quadrants)\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:297
msgid "\\*(NT Even though program images and shared libraries are considered I<private> to a process, they will be accounted for as I<shared> (SHR) by the kernel."
msgstr ""
#. ----------------------------------------------------------------------
#. type: SH
#: ../top/top.1:299
#, fuzzy, no-wrap
#| msgid "COMMAND-LINE OPTIONS"
msgid "1. COMMAND-LINE Options"
msgstr "KOMMANDORADSFLAGGOR"
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:302
msgid "The command-line syntax for \\*(We consists of:"
msgstr ""
#. type: Plain text
#: ../top/top.1:304
#, no-wrap
msgid " \\*(CL\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:307
msgid "The typically mandatory switch (`-') and even whitespace are completely optional."
msgstr ""
#. type: TP
#: ../top/top.1:308
#, no-wrap
msgid "-B<h> | -B<v>\\ \\ :I<Help/Version >"
msgstr ""
#. type: Plain text
#: ../top/top.1:311
msgid "Show library version and the usage prompt, then quit."
msgstr ""
#. type: TP
#: ../top/top.1:312
#, no-wrap
msgid "-B<b>\\ \\ :I<Batch-mode> operation "
msgstr ""
#. type: Plain text
#: ../top/top.1:318
msgid "Starts \\*(We in Batch mode, which could be useful for sending output from \\*(We to other programs or to a file. In this mode, \\*(We will not accept input and runs until the iterations limit you've set with the `-n' \\*(CO or until killed."
msgstr ""
#. type: TP
#: ../top/top.1:319
#, no-wrap
msgid "-B<c>\\ \\ :I<Command-line/Program-name> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:325
msgid "Starts \\*(We with the last remembered `c' state reversed. Thus, if \\*(We was displaying command lines, now that field will show program names, and vice versa. \\*(XC `c' \\*(CI for additional information."
msgstr ""
#. type: TP
#: ../top/top.1:326
#, no-wrap
msgid "-B<d>\\ \\ :I<Delay-time> interval as:\\ \\ B<-d ss.t> (I<secs>.I<tenths>) "
msgstr ""
#. type: Plain text
#: ../top/top.1:331
msgid "Specifies the delay between screen updates, and overrides the corresponding value in one's personal \\*(CF or the startup default. Later this can be changed with the `d' or `s' \\*(CIs."
msgstr ""
#. type: Plain text
#: ../top/top.1:336
msgid "Fractional seconds are honored, but a negative number is not allowed. In all cases, however, such changes are prohibited if \\*(We is running in Secure mode, except for root (unless the `s' \\*(CO was used). For additional information on Secure mode \\*(Xt 6d. SYSTEM Restrictions File."
msgstr ""
#. type: TP
#: ../top/top.1:337
#, no-wrap
msgid "-B<e>\\ \\ :I<Enforce-Task-Memory-Scaling> as:\\ \\ B<-e k> | B<m> | B<g> | B<t> | B<p>"
msgstr ""
#. type: Plain text
#: ../top/top.1:340
msgid "Instructs \\*(We to force \\*(TA memory to be scaled as:"
msgstr ""
#. type: Plain text
#: ../top/top.1:346
#, fuzzy, no-wrap
#| msgid ""
#| " B = bytes\n"
#| " Ki = kibibyte\n"
#| " Mi = mebibyte\n"
#| " Gi = gibibyte\n"
#| " Ti = tebibyte\n"
#| " Pi = pebibyte\n"
msgid ""
" k - kibibytes\n"
" m - mebibytes\n"
" g - gibibytes\n"
" t - tebibytes\n"
" p - pebibytes\n"
msgstr ""
" B = byte\n"
" Ki = kibibyte\n"
" Mi = mebibyte\n"
" Gi = gibibyte\n"
" Ti = tebibyte\n"
" Pi = pebibyte\n"
#. type: Plain text
#: ../top/top.1:349
msgid "Later this can be changed with the `e' \\*(CT."
msgstr ""
#. type: TP
#: ../top/top.1:350
#, no-wrap
msgid "-B<E>\\ \\ :I<Enforce-Summary-Memory-Scaling> as:\\ \\ B<-E k> | B<m> | B<g> | B<t> | B<p> | B<e>"
msgstr ""
#. type: Plain text
#: ../top/top.1:353
msgid "Instructs \\*(We to force \\*(SA memory to be scaled as:"
msgstr ""
#. type: Plain text
#: ../top/top.1:360
#, fuzzy, no-wrap
#| msgid ""
#| " B = bytes\n"
#| " Ki = kibibyte\n"
#| " Mi = mebibyte\n"
#| " Gi = gibibyte\n"
#| " Ti = tebibyte\n"
#| " Pi = pebibyte\n"
msgid ""
" k - kibibytes\n"
" m - mebibytes\n"
" g - gibibytes\n"
" t - tebibytes\n"
" p - pebibytes\n"
" e - exbibytes\n"
msgstr ""
" B = byte\n"
" Ki = kibibyte\n"
" Mi = mebibyte\n"
" Gi = gibibyte\n"
" Ti = tebibyte\n"
" Pi = pebibyte\n"
#. type: Plain text
#: ../top/top.1:363
msgid "Later this can be changed with the `E' \\*(CT."
msgstr ""
#. type: TP
#: ../top/top.1:364
#, no-wrap
msgid "-B<H>\\ \\ :I<Threads-mode> operation "
msgstr ""
#. type: Plain text
#: ../top/top.1:369
msgid "Instructs \\*(We to display individual threads. Without this \\*(CO a summation of all threads in each process is shown. Later this can be changed with the `H' \\*(CI."
msgstr ""
#. type: TP
#: ../top/top.1:370
#, no-wrap
msgid "-B<i>\\ \\ :I<Idle-process> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:377
msgid "Starts \\*(We with the last remembered `i' state reversed. When this toggle is \\*F, tasks that have not used any \\*(PU since the last update will not be displayed. For additional information regarding this toggle \\*(Xt 4c. TASK AREA Commands, SIZE."
msgstr ""
#. type: TP
#: ../top/top.1:378
#, no-wrap
msgid "-B<n>\\ \\ :I<Number-of-iterations> limit as:B<\\ \\ -n number >"
msgstr ""
#. type: Plain text
#: ../top/top.1:382
msgid "Specifies the maximum number of iterations, or frames, \\*(We should produce before ending."
msgstr ""
#. type: TP
#: ../top/top.1:383
#, no-wrap
msgid "-B<o>\\ \\ :I<Override-sort-field> as:B<\\ \\ -o fieldname >"
msgstr ""
#. type: Plain text
#: ../top/top.1:390
msgid "Specifies the name of the field on which tasks will be sorted, independent of what is reflected in the configuration file. You can prepend a `+' or `-' to the field name to also override the sort direction. A leading `+' will force sorting high to low, whereas a `-' will ensure a low to high ordering."
msgstr ""
#. type: Plain text
#: ../top/top.1:393
msgid "This option exists primarily to support automated/scripted batch mode operation."
msgstr ""
#. type: TP
#: ../top/top.1:394
#, no-wrap
msgid "-B<O>\\ \\ :I<Output-field-names >"
msgstr ""
#. type: Plain text
#: ../top/top.1:400
msgid "This option acts as a form of help for the above -o option. It will cause \\*(We to print each of the available field names on a separate line, then quit. Such names are subject to NLS (National Language Support) translation."
msgstr ""
#. type: TP
#: ../top/top.1:401
#, no-wrap
msgid "-B<p>\\ \\ :I<Monitor-PIDs> mode as:B<\\ \\ -pN1 -pN2 ...>\\ \\ orB<\\ \\ -pN1,N2,N3 ... >"
msgstr ""
#. type: Plain text
#: ../top/top.1:407
msgid "Monitor only processes with specified process IDs. This option can be given up to \\*(WP times, or you can provide a comma delimited list with up to \\*(WP pids. Co-mingling both approaches is permitted."
msgstr ""
#. type: Plain text
#: ../top/top.1:410
msgid "A pid value of zero will be treated as the process id of the \\*(We program itself once it is running."
msgstr ""
#. type: Plain text
#: ../top/top.1:414
msgid "This is a \\*(CO only and should you wish to return to normal operation, it is not necessary to quit and restart \\*(We \\*(Em just issue any of these \\*(CIs: `=', `u' or `U'."
msgstr ""
#. type: Plain text
#: ../top/top.1:416 ../top/top.1:440
msgid "The `p', `u' and `U' \\*(COs are mutually exclusive."
msgstr ""
#. type: TP
#: ../top/top.1:417
#, no-wrap
msgid "-B<s>\\ \\ :I<Secure-mode> operation "
msgstr ""
#. type: Plain text
#: ../top/top.1:422
msgid "Starts \\*(We with secure mode forced, even for root. This mode is far better controlled through a system \\*(CF (\\*(Xt 6. FILES)."
msgstr ""
#. type: TP
#: ../top/top.1:423
#, no-wrap
msgid "-B<S>\\ \\ :I<Cumulative-time> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:429
msgid "Starts \\*(We with the last remembered `S' state reversed. When Cumulative time mode is \\*O, each process is listed with the \\*(Pu time that it and its dead children have used. \\*(XC `S' \\*(CI for additional information regarding this mode."
msgstr ""
#. type: TP
#: ../top/top.1:430
#, no-wrap
msgid "-B<u> | -B<U>\\ \\ :I<User-filter-mode> as:\\ \\ B<-u> | B<-U number> orB< name >"
msgstr ""
#. type: Plain text
#: ../top/top.1:435
msgid "Display only processes with a user id or user name matching that given. The `-u' option matches on I< effective> user whereas the `-U' option matches onI< any> user (real, effective, saved, or filesystem)."
msgstr ""
#. type: Plain text
#: ../top/top.1:438
msgid "Prepending an exclamation point (`!') to the user id or name instructs \\*(We to display only processes with users not matching the one provided."
msgstr ""
#. type: TP
#: ../top/top.1:441
#, no-wrap
msgid "-B<w>\\ \\ :I<Output-width-override> as:\\ \\ B<-w> [B< number> ] "
msgstr ""
#. type: Plain text
#: ../top/top.1:448
msgid "In Batch mode, when used without an argument \\*(We will format output using the COLUMNS= and LINES= environment variables, if set. Otherwise, width will be fixed at the maximum \\*(WX columns. With an argument, output width can be decreased or increased (up to \\*(WX) but the number of rows is considered unlimited."
msgstr ""
#. type: Plain text
#: ../top/top.1:454
msgid "In normal display mode, when used without an argument \\*(We willI< attempt> to format output using the COLUMNS= and LINES= environment variables, if set. With an argument, output width can only be decreased, not increased. Whether using environment variables or an argument with -w, whenI< not> in Batch mode actual terminal dimensions can never be exceeded."
msgstr ""
#. type: Plain text
#: ../top/top.1:457
msgid "\\*(NT Without the use of this \\*(CO, output width is always based on the terminal at which \\*(We was invoked whether or not in Batch mode."
msgstr ""
#. type: TP
#: ../top/top.1:458
#, no-wrap
msgid "-B<1>\\ \\ :I<Single/Separate-Cpu-States> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:464
msgid "Starts \\*(We with the last remembered Cpu States portion of the \\*(SA reversed. Either all \\*(Pu information will be displayed in a single line or each \\*(Pu will be displayed separately, depending on the state of the NUMA Node \\*(CT ('2')."
msgstr ""
#. type: Plain text
#: ../top/top.1:466
msgid "\\*(XC `1' and '2' \\*(CIs for additional information."
msgstr ""
#. ----------------------------------------------------------------------
#. type: SH
#: ../top/top.1:468
#, no-wrap
msgid "2. SUMMARY Display"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:474
msgid "Each of the following three areas are individually controlled through one or more \\*(CIs. \\*(XT 4b. SUMMARY AREA Commands for additional information regarding these provisions."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:476
#, no-wrap
msgid "2a. UPTIME and LOAD Averages"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:479
msgid "This portion consists of a single line containing:"
msgstr ""
#. type: Plain text
#: ../top/top.1:484
#, no-wrap
msgid ""
" B<program> orB< window> name, depending on display mode\n"
" current time and length of time since last boot\n"
" total number of users\n"
" system load avg over the last 1, 5 and 15 minutes\n"
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:487
#, no-wrap
msgid "2b. TASK and CPU States"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:492
msgid "This portion consists of a minimum of two lines. In an SMP environment, additional lines can reflect individual \\*(PU state percentages."
msgstr ""
#. type: Plain text
#: ../top/top.1:496
msgid "Line 1 shows totalB< tasks> orB< threads>, depending on the state of the Threads-mode toggle. That total is further classified as:"
msgstr ""
#. type: Plain text
#: ../top/top.1:498
#, no-wrap
msgid " running; sleeping; stopped; zombie\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:502
msgid "Line 2 shows \\*(PU state percentages based on the interval since the last refresh."
msgstr ""
#. type: Plain text
#: ../top/top.1:506
msgid "As a default, percentages for these individual categories are displayed. Where two labels are shown below, those for more recent kernel versions are shown first."
msgstr ""
#. type: Plain text
#: ../top/top.1:515
#, no-wrap
msgid ""
" B<us>,B< user> : time running un-niced user processes\n"
" B<sy>,B< system> : time running kernel processes\n"
" B<ni>,B< nice> : time running niced user processes\n"
" B<id>,B< idle> : time spent in the kernel idle handler\n"
" B<wa>,B< IO-wait> : time waiting for I/O completion\n"
" B<hi> : time spent servicing hardware interrupts\n"
" B<si> : time spent servicing software interrupts\n"
" B<st> : time stolen from this vm by the hypervisor\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:519
msgid "In the alternate cpu states display modes, beyond the first tasks/threads line, an abbreviated summary is shown consisting of these elements:"
msgstr ""
#. type: Plain text
#: ../top/top.1:522
#, no-wrap
msgid ""
" a b c d\n"
" %Cpu(s): B<75.0>/25.0 B<100>[ ...\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:530
msgid "Where: a) is the `user' (us + ni) percentage; b) is the `system' (sy + hi + si) percentage; c) is the total; and d) is one of two visual graphs of those representations. \\*(XT 4b. SUMMARY AREA Commands and the `t' command for additional information on that special 4-way toggle."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:532
#, no-wrap
msgid "2c. MEMORY Usage"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:537
msgid "This portion consists of two lines which may express values in kibibytes (KiB) through exbibytes (EiB) depending on the scaling factor enforced with the `E' \\*(CI."
msgstr ""
#. type: Plain text
#: ../top/top.1:539
msgid "As a default, Line 1 reflects \\*(MP, classified as:"
msgstr ""
#. type: Plain text
#: ../top/top.1:541
#, no-wrap
msgid " total, free, used and buff/cache\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:544
msgid "Line 2 reflects mostly \\*(MV, classified as:"
msgstr ""
#. type: Plain text
#: ../top/top.1:546
#, no-wrap
msgid " total, free, used and avail (which is \\*(MP)\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:554
#, fuzzy
#| msgid "Estimation of how much memory is available for starting new applications, without swapping. Unlike the data provided by the B<cache> or B<free> fields, this field takes into account page cache and also that not all reclaimable memory slabs will be reclaimed due to items being in use (MemAvailable in /proc/meminfo, available on kernels 3.14, emulated on kernels 2.6.27+, otherwise the same as B<free>)"
msgid "The B<avail> number on line 2 is an estimation of \\*(MP available for starting new applications, without swapping. Unlike the B<free> field, it attempts to account for readily reclaimable page cache and memory slabs. It is available on kernels 3.14, emulated on kernels 2.6.27+, otherwise the same as B<free>."
msgstr "Uppskattning av hur mycket minne som är tillgängligt för att starta nya program, utan att börja växla. Till skillnad mot data som tillhandahålls av fälten B<cache> eller B<fritt> tar detta fält hänsyn till sidcachen och även att inte alla återvinningsbara minnesskivor kommer återvinnas på grund av saker som används (MemAvailable i /proc/meminfo, tillgängligt i kärnan 3.14, emulerat i kärnor 2.6.27+, annars samma som B<fritt>)"
#. type: Plain text
#: ../top/top.1:557
msgid "In the alternate memory display modes, two abbreviated summary lines are shown consisting of these elements:"
msgstr ""
#. type: Plain text
#: ../top/top.1:561
#, no-wrap
msgid ""
" a b c\n"
" GiB Mem : B<18.7>/15.738 [ ...\n"
" GiB Swap: B< 0.0>/7.999 [ ...\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:565
msgid "Where: a) is the percentage used; b) is the total available; and c) is one of two visual graphs of those representations."
msgstr ""
#. type: Plain text
#: ../top/top.1:572
msgid "In the case of \\*(MP, the percentage represents the B<total> minus the estimated B<avail> noted above. The `Mem' graph itself is divided between B<used> and any remaining memory not otherwise accounted for by B<avail>. \\*(XT 4b. SUMMARY AREA Commands and the `m' command for additional information on that special 4-way toggle."
msgstr ""
#. type: Plain text
#: ../top/top.1:574
msgid "This table may help in interpreting the scaled values displayed:"
msgstr ""
#. type: Plain text
#: ../top/top.1:581
#, no-wrap
msgid ""
" KiB = kibibyte = 1024 bytes\n"
" MiB = mebibyte = 1024 KiB = 1,048,576 bytes\n"
" GiB = gibibyte = 1024 MiB = 1,073,741,824 bytes\n"
" TiB = tebibyte = 1024 GiB = 1,099,511,627,776 bytes\n"
" PiB = pebibyte = 1024 TiB = 1,125,899,906,842,624 bytes\n"
" EiB = exbibyte = 1024 PiB = 1,152,921,504,606,846,976 bytes\n"
msgstr ""
#. ----------------------------------------------------------------------
#. type: SH
#: ../top/top.1:584
#, no-wrap
msgid "3. FIELDS / Columns"
msgstr ""
#. ----------------------------------------------------------------------
#. ......................................................................
#. type: SS
#: ../top/top.1:587
#, no-wrap
msgid "3a. DESCRIPTIONS of Fields"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:593
msgid "Listed below are \\*(We's available process fields (columns). They are shown in strict ascii alphabetical order. You may customize their position and whether or not they are displayable with the `f' or `F' (Fields Management) \\*(CIs."
msgstr ""
#. type: Plain text
#: ../top/top.1:598
msgid "Any field is selectable as the sort field, and you control whether they are sorted high-to-low or low-to-high. For additional information on sort provisions \\*(Xt 4c. TASK AREA Commands, SORTING."
msgstr ""
#. type: Plain text
#: ../top/top.1:604
msgid "The fields related to \\*(MP or \\*(MV reference `(KiB)' which is the unsuffixed display mode. Such fields may, however, be scaled from KiB through PiB. That scaling is influenced via the `e' \\*(CI or established for startup through a build option."
msgstr ""
#. type: TP
#: ../top/top.1:605
#, no-wrap
msgid " 1.B< %CPU \\*(Em \\*(PU Usage >"
msgstr ""
#. type: Plain text
#: ../top/top.1:609
msgid "The task's share of the elapsed \\*(PU time since the last screen update, expressed as a percentage of total \\*(PU time."
msgstr ""
#. type: Plain text
#: ../top/top.1:614
msgid "In a true SMP environment, if a process is multi-threaded and \\*(We is I<not> operating in Threads mode, amounts greater than 100% may be reported. You toggle Threads mode with the `H' \\*(CI."
msgstr ""
#. type: Plain text
#: ../top/top.1:619
msgid "Also for multi-processor environments, if Irix mode is \\*F, \\*(We will operate in Solaris mode where a task's \\*(Pu usage will be divided by the total number of \\*(PUs. You toggle Irix/Solaris modes with the `I' \\*(CI."
msgstr ""
#. type: Plain text
#: ../top/top.1:625
msgid "\\*(NT When running in forest view mode (`V') with children collapsed (`v'), this field will also include the \\*(PU time of those unseen children. \\*(XT 4c. TASK AREA Commands, CONTENT for more information regarding the `V' and `v' toggles."
msgstr ""
#. type: TP
#: ../top/top.1:626
#, no-wrap
msgid " 2.B< %MEM \\*(Em Memory Usage (RES) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:629
msgid "A task's currently resident share of available \\*(MP."
msgstr ""
#. type: Plain text
#: ../top/top.1:631 ../top/top.1:668 ../top/top.1:701 ../top/top.1:821
#: ../top/top.1:874 ../top/top.1:924 ../top/top.1:969 ../top/top.1:981
msgid "\\*(XX."
msgstr ""
#. type: TP
#: ../top/top.1:632
#, no-wrap
msgid " 3.B< CGNAME \\*(Em Control Group Name >"
msgstr ""
#. type: Plain text
#: ../top/top.1:636
msgid "The name of the control group to which a process belongs, or `-' if not applicable for that process."
msgstr ""
#. type: Plain text
#: ../top/top.1:640
msgid "This will typically be the last entry in the full list of control groups as shown under the next heading (CGROUPS). And as is true there, this field is also variable width."
msgstr ""
#. type: TP
#: ../top/top.1:641
#, no-wrap
msgid " 4.B< CGROUPS \\*(Em Control Groups >"
msgstr ""
#. type: Plain text
#: ../top/top.1:645
msgid "The names of the control group(s) to which a process belongs, or `-' if not applicable for that process."
msgstr ""
#. type: Plain text
#: ../top/top.1:650
msgid "Control Groups provide for allocating resources (cpu, memory, network bandwidth, etc.) among installation-defined groups of processes. They enable fine-grained control over allocating, denying, prioritizing, managing and monitoring those resources."
msgstr ""
#. type: Plain text
#: ../top/top.1:654
msgid "Many different hierarchies of cgroups can exist simultaneously on a system and each hierarchy is attached to one or more subsystems. A subsystem represents a single resource."
msgstr ""
#. type: Plain text
#: ../top/top.1:661
msgid "\\*(NT The CGROUPS field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum \\*(WX characters). Even so, such variable width fields could still suffer truncation. \\*(XT 5c. SCROLLING a Window for additional information on accessing any truncated data."
msgstr ""
#. type: TP
#: ../top/top.1:662
#, no-wrap
msgid " 5.B< CODE \\*(Em Code Size (KiB) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:666
msgid "The amount of \\*(MP currently devoted to executable code, also known as the Text Resident Set size or TRS."
msgstr ""
#. type: TP
#: ../top/top.1:669
#, no-wrap
msgid " 6.B< COMMAND \\*(Em Command Name> or CommandB< Line >"
msgstr ""
#. type: Plain text
#: ../top/top.1:675
msgid "Display the command line used to start a task or the name of the associated program. You toggle between commandI< line> andI< name> with `c', which is both a \\*(CO and an \\*(CI."
msgstr ""
#. type: Plain text
#: ../top/top.1:680
#, no-wrap
msgid ""
"When you've chosen to display command lines, processes without a command\n"
"line (like kernel threads) will be shown with only the program name in\n"
"brackets, as in this example:\n"
" [kthreadd]\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:683
msgid "This field may also be impacted by the forest view display mode. \\*(XC `V' \\*(CI for additional information regarding that mode."
msgstr ""
#. type: Plain text
#: ../top/top.1:692
msgid "\\*(NT The COMMAND field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum \\*(WX characters). Even so, such variable width fields could still suffer truncation. This is especially true for this field when command lines are being displayed (the `c' \\*(CI.) \\*(XT 5c. SCROLLING a Window for additional information on accessing any truncated data."
msgstr ""
#. type: TP
#: ../top/top.1:693
#, no-wrap
msgid " 7.B< DATA \\*(Em Data + Stack Size (KiB) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:699
msgid "The amount of private memory I<reserved> by a process. It is also known as the Data Resident Set or DRS. Such memory may not yet be mapped to \\*(MP (RES) but will always be included in the \\*(MV (VIRT) amount."
msgstr ""
#. type: TP
#: ../top/top.1:702
#, no-wrap
msgid " 8.B< ENVIRON \\*(Em Environment variables >"
msgstr ""
#. type: Plain text
#: ../top/top.1:708
msgid "Display all of the environment variables, if any, as seen by the respective processes. These variables will be displayed in their raw native order, not the sorted order you are accustomed to seeing with an unqualified `set'."
msgstr ""
#. type: Plain text
#: ../top/top.1:716
msgid "\\*(NT The ENVIRON field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum \\*(WX characters). Even so, such variable width fields could still suffer truncation. This is especially true for this field. \\*(XT 5c. SCROLLING a Window for additional information on accessing any truncated data."
msgstr ""
#. type: TP
#: ../top/top.1:717
#, no-wrap
msgid " 9.B< Flags \\*(Em Task Flags >"
msgstr ""
#. type: Plain text
#: ../top/top.1:722
msgid "This column represents the task's current scheduling flags which are expressed in hexadecimal notation and with zeros suppressed. These flags are officially documented in E<lt>linux/sched.hE<gt>."
msgstr ""
#. type: TP
#: ../top/top.1:723
#, no-wrap
msgid "10.B< GID \\*(Em Group Id >"
msgstr ""
#. type: Plain text
#: ../top/top.1:726
msgid "TheI< effective> group ID."
msgstr ""
#. type: TP
#: ../top/top.1:727
#, no-wrap
msgid "11.B< GROUP \\*(Em Group Name >"
msgstr ""
#. type: Plain text
#: ../top/top.1:730
msgid "TheI< effective> group name."
msgstr ""
#. type: TP
#: ../top/top.1:731
#, no-wrap
msgid "12.B< LXC \\*(Em Lxc Container Name >"
msgstr ""
#. type: Plain text
#: ../top/top.1:735
msgid "The name of the lxc container within which a task is running. If a process is not running inside a container, a dash (`-') will be shown."
msgstr ""
#. type: TP
#: ../top/top.1:736
#, no-wrap
msgid "13.B< NI \\*(Em Nice Value >"
msgstr ""
#. type: Plain text
#: ../top/top.1:743
msgid "The nice value of the task. A negative nice value means higher priority, whereas a positive nice value means lower priority. Zero in this field simply means priority will not be adjusted in determining a task's dispatch-ability."
msgstr ""
#. type: TP
#: ../top/top.1:744
#, no-wrap
msgid "14.B< NU \\*(Em Last known NUMA node >"
msgstr ""
#. type: Plain text
#: ../top/top.1:748
msgid "A number representing the NUMA node associated with the last used processor (`P'). When -1 is displayed it means that NUMA information is not available."
msgstr ""
#. type: Plain text
#: ../top/top.1:750
msgid "\\*(XC `'2' and `3' \\*(CIs for additional NUMA provisions affecting the \\*(SA."
msgstr ""
#. type: TP
#: ../top/top.1:751
#, no-wrap
msgid "15.B< OOMa \\*(Em Out of Memory Adjustment Factor >"
msgstr ""
#. type: Plain text
#: ../top/top.1:756
msgid "The value, ranging from -1000 to +1000, added to the current out of memory score (OOMs) which is then used to determine which task to kill when memory is exhausted."
msgstr ""
#. type: TP
#: ../top/top.1:757
#, no-wrap
msgid "16.B< OOMs \\*(Em Out of Memory Score >"
msgstr ""
#. type: Plain text
#: ../top/top.1:762
msgid "The value, ranging from 0 to +1000, used to select task(s) to kill when memory is exhausted. Zero translates to `never kill' whereas 1000 means `always kill'."
msgstr ""
#. type: TP
#: ../top/top.1:763
#, no-wrap
msgid "17.B< P \\*(Em Last used \\*(PU (SMP) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:771
msgid "A number representing the last used processor. In a true SMP environment this will likely change frequently since the kernel intentionally uses weak affinity. Also, the very act of running \\*(We may break this weak affinity and cause more processes to change \\*(PUs more often (because of the extra demand for \\*(Pu time)."
msgstr ""
#. type: TP
#: ../top/top.1:772
#, no-wrap
msgid "18.B< PGRP \\*(Em Process Group Id >"
msgstr ""
#. type: Plain text
#: ../top/top.1:781
msgid "Every process is member of a unique process group which is used for distribution of signals and by terminals to arbitrate requests for their input and output. When a process is created (forked), it becomes a member of the process group of its parent. By convention, this value equals the process ID (\\*(Xa PID) of the first member of a process group, called the process group leader."
msgstr ""
#. type: TP
#: ../top/top.1:782
#, no-wrap
msgid "19.B< PID \\*(Em Process Id >"
msgstr ""
#. type: Plain text
#: ../top/top.1:787
msgid "The task's unique process ID, which periodically wraps, though never restarting at zero. In kernel terms, it is a dispatchable entity defined by a task_struct."
msgstr ""
#. type: Plain text
#: ../top/top.1:792
msgid "This value may also be used as: a process group ID (\\*(Xa PGRP); a session ID for the session leader (\\*(Xa SID); a thread group ID for the thread group leader (\\*(Xa TGID); and a TTY process group ID for the process group leader (\\*(Xa TPGID)."
msgstr ""
#. type: TP
#: ../top/top.1:793
#, no-wrap
msgid "20.B< PPID \\*(Em Parent Process Id >"
msgstr ""
#. type: Plain text
#: ../top/top.1:796
msgid "The process ID (pid) of a task's parent."
msgstr ""
#. type: TP
#: ../top/top.1:797
#, no-wrap
msgid "21.B< PR \\*(Em Priority >"
msgstr ""
#. type: Plain text
#: ../top/top.1:802
msgid "The scheduling priority of the task. If you see `rt' in this field, it means the task is running under real time scheduling priority."
msgstr ""
#. type: Plain text
#: ../top/top.1:806
msgid "Under linux, real time priority is somewhat misleading since traditionally the operating itself was not preemptible. And while the 2.6 kernel can be made mostly preemptible, it is not always so."
msgstr ""
#. type: TP
#: ../top/top.1:807
#, no-wrap
msgid "22.B< RES \\*(Em Resident Memory Size (KiB) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:812
msgid "A subset of the virtual address space (VIRT) representing the non-swapped \\*(MP a task is currently using. It is also the sum of the RSan, RSfd and RSsh fields."
msgstr ""
#. type: Plain text
#: ../top/top.1:816
msgid "It can include private anonymous pages, private pages mapped to files (including program images and shared libraries) plus shared anonymous pages. All such memory is backed by the \\*(MS represented separately under SWAP."
msgstr ""
#. type: Plain text
#: ../top/top.1:819
msgid "Lastly, this field may also include shared file-backed pages which, when modified, act as a dedicated \\*(MS and thus will never impact SWAP."
msgstr ""
#. type: TP
#: ../top/top.1:822
#, no-wrap
msgid "23.B< RSan \\*(Em Resident Anonymous Memory Size (KiB) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:826
msgid "A subset of resident memory (RES) representing private pages not mapped to a file."
msgstr ""
#. type: TP
#: ../top/top.1:827
#, no-wrap
msgid "24.B< RSfd \\*(Em Resident File-Backed Memory Size (KiB) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:832
msgid "A subset of resident memory (RES) representing the implicitly shared pages supporting program images and shared libraries. It also includes explicit file mappings, both private and shared."
msgstr ""
#. type: TP
#: ../top/top.1:833
#, no-wrap
msgid "25.B< RSlk \\*(Em Resident Locked Memory Size (KiB) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:836
msgid "A subset of resident memory (RES) which cannot be swapped out."
msgstr ""
#. type: TP
#: ../top/top.1:837
#, no-wrap
msgid "26.B< RSsh \\*(Em Resident Shared Memory Size (KiB) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:841
msgid "A subset of resident memory (RES) representing the explicitly shared anonymous shm*/mmap pages."
msgstr ""
#. type: TP
#: ../top/top.1:842
#, no-wrap
msgid "27.B< RUID \\*(Em Real User Id >"
msgstr ""
#. type: Plain text
#: ../top/top.1:845
msgid "TheI< real> user ID."
msgstr ""
#. type: TP
#: ../top/top.1:846
#, no-wrap
msgid "28.B< RUSER \\*(Em Real User Name >"
msgstr ""
#. type: Plain text
#: ../top/top.1:849
#, fuzzy
#| msgid "The next expression is a username."
msgid "TheI< real> user name."
msgstr "Nästa uttryck är ett användarnamn."
#. type: TP
#: ../top/top.1:850
#, no-wrap
msgid "29.B< S \\*(Em Process Status >"
msgstr ""
#. type: Plain text
#: ../top/top.1:860
#, no-wrap
msgid ""
"The status of the task which can be one of:\n"
" B<D> = uninterruptible sleep\n"
" B<I> = idle\n"
" B<R> = running\n"
" B<S> = sleeping\n"
" B<T> = stopped by job control signal\n"
" B<t> = stopped by debugger during trace\n"
" B<Z> = zombie\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:865
msgid "Tasks shown as running should be more properly thought of as ready to run \\*(Em their task_struct is simply represented on the Linux run-queue. Even without a true SMP machine, you may see numerous tasks in this state depending on \\*(We's delay interval and nice value."
msgstr ""
#. type: TP
#: ../top/top.1:866
#, no-wrap
msgid "30.B< SHR \\*(Em Shared Memory Size (KiB) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:872
msgid "A subset of resident memory (RES) that may be used by other processes. It will include shared anonymous pages and shared file-backed pages. It also includes private pages mapped to files representing program images and shared libraries."
msgstr ""
#. type: TP
#: ../top/top.1:875
#, no-wrap
msgid "31.B< SID \\*(Em Session Id >"
msgstr ""
#. type: Plain text
#: ../top/top.1:883
msgid "A session is a collection of process groups (\\*(Xa PGRP), usually established by the login shell. A newly forked process joins the session of its creator. By convention, this value equals the process ID (\\*(Xa PID) of the first member of the session, called the session leader, which is usually the login shell."
msgstr ""
#. type: TP
#: ../top/top.1:884
#, no-wrap
msgid "32.B< SUID \\*(Em Saved User Id >"
msgstr ""
#. type: Plain text
#: ../top/top.1:887
msgid "TheI< saved> user ID."
msgstr ""
#. type: TP
#: ../top/top.1:888
#, no-wrap
msgid "33.B< SUPGIDS \\*(Em Supplementary Group IDs >"
msgstr ""
#. type: Plain text
#: ../top/top.1:893
msgid "The IDs of any supplementary group(s) established at login or inherited from a task's parent. They are displayed in a comma delimited list."
msgstr ""
#. type: Plain text
#: ../top/top.1:900
msgid "\\*(NT The SUPGIDS field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum \\*(WX characters). Even so, such variable width fields could still suffer truncation. \\*(XT 5c. SCROLLING a Window for additional information on accessing any truncated data."
msgstr ""
#. type: TP
#: ../top/top.1:901
#, no-wrap
msgid "34.B< SUPGRPS \\*(Em Supplementary Group Names >"
msgstr ""
#. type: Plain text
#: ../top/top.1:906
msgid "The names of any supplementary group(s) established at login or inherited from a task's parent. They are displayed in a comma delimited list."
msgstr ""
#. type: Plain text
#: ../top/top.1:913
msgid "\\*(NT The SUPGRPS field, unlike most columns, is not fixed-width. When displayed, it plus any other variable width columns will be allocated all remaining screen width (up to the maximum \\*(WX characters). Even so, such variable width fields could still suffer truncation. \\*(XT 5c. SCROLLING a Window for additional information on accessing any truncated data."
msgstr ""
#. type: TP
#: ../top/top.1:914
#, no-wrap
msgid "35.B< SUSER \\*(Em Saved User Name >"
msgstr ""
#. type: Plain text
#: ../top/top.1:917
msgid "TheI< saved> user name."
msgstr ""
#. type: TP
#: ../top/top.1:918
#, no-wrap
msgid "36.B< SWAP \\*(Em Swapped Size (KiB) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:922
msgid "The formerly resident portion of a task's address space written to the \\*(MS when \\*(MP becomes over committed."
msgstr ""
#. type: TP
#: ../top/top.1:925
#, no-wrap
msgid "37.B< TGID \\*(Em Thread Group Id >"
msgstr ""
#. type: Plain text
#: ../top/top.1:930
msgid "The ID of the thread group to which a task belongs. It is the PID of the thread group leader. In kernel terms, it represents those tasks that share an mm_struct."
msgstr ""
#. type: TP
#: ../top/top.1:931
#, no-wrap
msgid "38.B< TIME \\*(Em \\*(PU Time >"
msgstr ""
#. type: Plain text
#: ../top/top.1:938
msgid "Total \\*(PU time the task has used since it started. When Cumulative mode is \\*O, each process is listed with the \\*(Pu time that it and its dead children have used. You toggle Cumulative mode with `S', which is both a \\*(CO and an \\*(CI. \\*(XC `S' \\*(CI for additional information regarding this mode."
msgstr ""
#. type: TP
#: ../top/top.1:939
#, no-wrap
msgid "39.B< TIME+ \\*(Em \\*(PU Time, hundredths >"
msgstr ""
#. type: Plain text
#: ../top/top.1:943
msgid "The same as TIME, but reflecting more granularity through hundredths of a second."
msgstr ""
#. type: TP
#: ../top/top.1:944
#, no-wrap
msgid "40.B< TPGID \\*(Em Tty Process Group Id >"
msgstr ""
#. type: Plain text
#: ../top/top.1:950
msgid "The process group ID of the foreground process for the connected tty, or -1 if a process is not connected to a terminal. By convention, this value equals the process ID (\\*(Xa PID) of the process group leader (\\*(Xa PGRP)."
msgstr ""
#. type: TP
#: ../top/top.1:951
#, no-wrap
msgid "41.B< TTY \\*(Em Controlling Tty >"
msgstr ""
#. type: Plain text
#: ../top/top.1:958
msgid "The name of the controlling terminal. This is usually the device (serial port, pty, etc.) from which the process was started, and which it uses for input or output. However, a task need not be associated with a terminal, in which case you'll see `?' displayed."
msgstr ""
#. type: TP
#: ../top/top.1:959
#, no-wrap
msgid "42.B< UID \\*(Em User Id >"
msgstr ""
#. type: Plain text
#: ../top/top.1:962
msgid "TheI< effective> user ID of the task's owner."
msgstr ""
#. type: TP
#: ../top/top.1:963
#, no-wrap
msgid "43.B< USED \\*(Em Memory in Use (KiB) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:967
msgid "This field represents the non-swapped \\*(MP a task is using (RES) plus the swapped out portion of its address space (SWAP)."
msgstr ""
#. type: TP
#: ../top/top.1:970
#, no-wrap
msgid "44.B< USER \\*(Em User Name >"
msgstr ""
#. type: Plain text
#: ../top/top.1:973
msgid "TheI< effective> user name of the task's owner."
msgstr ""
#. type: TP
#: ../top/top.1:974
#, no-wrap
msgid "45.B< VIRT \\*(Em Virtual Memory Size (KiB) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:979
msgid "The total amount of \\*(MV used by the task. It includes all code, data and shared libraries plus pages that have been swapped out and pages that have been mapped but not used."
msgstr ""
#. type: TP
#: ../top/top.1:982
#, no-wrap
msgid "46.B< WCHAN \\*(Em Sleeping in Function >"
msgstr ""
#. type: Plain text
#: ../top/top.1:987
msgid "This field will show the name of the kernel function in which the task is currently sleeping. Running tasks will display a dash (`-') in this column."
msgstr ""
#. type: TP
#: ../top/top.1:988
#, no-wrap
msgid "47.B< nDRT \\*(Em Dirty Pages Count >"
msgstr ""
#. type: Plain text
#: ../top/top.1:994
msgid "The number of pages that have been modified since they were last written to \\*(AS. Dirty pages must be written to \\*(AS before the corresponding physical memory location can be used for some other virtual page."
msgstr ""
#. type: Plain text
#: ../top/top.1:996
msgid "This field was deprecated with linux 2.6 and is always zero."
msgstr ""
#. type: TP
#: ../top/top.1:997
#, no-wrap
msgid "48.B< nMaj \\*(Em Major Page Fault Count >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1004
msgid "The number ofB< major> page faults that have occurred for a task. A page fault occurs when a process attempts to read from or write to a virtual page that is not currently present in its address space. A major page fault is when \\*(AS access is involved in making that page available."
msgstr ""
#. type: TP
#: ../top/top.1:1005
#, no-wrap
msgid "49.B< nMin \\*(Em Minor Page Fault count >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1012
msgid "The number ofB< minor> page faults that have occurred for a task. A page fault occurs when a process attempts to read from or write to a virtual page that is not currently present in its address space. A minor page fault does not involve \\*(AS access in making that page available."
msgstr ""
#. type: TP
#: ../top/top.1:1013
#, no-wrap
msgid "50.B< nTH \\*(Em Number of Threads >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1016
msgid "The number of threads associated with a process."
msgstr ""
#. type: TP
#: ../top/top.1:1017
#, no-wrap
msgid "51.B< nsIPC \\*(Em IPC namespace >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1021
msgid "The Inode of the namespace used to isolate interprocess communication (IPC) resources such as System V IPC objects and POSIX message queues."
msgstr ""
#. type: TP
#: ../top/top.1:1022
#, no-wrap
msgid "52.B< nsMNT \\*(Em MNT namespace >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1026
msgid "The Inode of the namespace used to isolate filesystem mount points thus offering different views of the filesystem hierarchy."
msgstr ""
#. type: TP
#: ../top/top.1:1027
#, no-wrap
msgid "53.B< nsNET \\*(Em NET namespace >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1031
msgid "The Inode of the namespace used to isolate resources such as network devices, IP addresses, IP routing, port numbers, etc."
msgstr ""
#. type: TP
#: ../top/top.1:1032
#, no-wrap
msgid "54.B< nsPID \\*(Em PID namespace >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1038
msgid "The Inode of the namespace used to isolate process ID numbers meaning they need not remain unique. Thus, each such namespace could have its own `init/systemd' (PID #1) to manage various initialization tasks and reap orphaned child processes."
msgstr ""
#. type: TP
#: ../top/top.1:1039
#, no-wrap
msgid "55.B< nsUSER \\*(Em USER namespace >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1045
msgid "The Inode of the namespace used to isolate the user and group ID numbers. Thus, a process could have a normal unprivileged user ID outside a user namespace while having a user ID of 0, with full root privileges, inside that namespace."
msgstr ""
#. type: TP
#: ../top/top.1:1046
#, no-wrap
msgid "56.B< nsUTS \\*(Em UTS namespace >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1050
msgid "The Inode of the namespace used to isolate hostname and NIS domain name. UTS simply means \"UNIX Time-sharing System\"."
msgstr ""
#. type: TP
#: ../top/top.1:1051
#, no-wrap
msgid "57.B< vMj \\*(Em Major Page Fault Count Delta>"
msgstr ""
#. type: Plain text
#: ../top/top.1:1055
msgid "The number ofB< major> page faults that have occurred since the last update (see nMaj)."
msgstr ""
#. type: TP
#: ../top/top.1:1056
#, no-wrap
msgid "58.B< vMn \\*(Em Minor Page Fault Count Delta>"
msgstr ""
#. type: Plain text
#: ../top/top.1:1060
msgid "The number ofB< minor> page faults that have occurred since the last update (see nMin)."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:1062
#, no-wrap
msgid "3b. MANAGING Fields"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:1069
msgid "After pressing the \\*(CI `f' or `F' (Fields Management) you will be presented with a screen showing: 1) the \\*(CW name; 2) the designated sort field; 3) all fields in their current order along with descriptions. Entries marked with an asterisk are the currently displayed fields, screen width permitting."
msgstr ""
#. type: IP
#: ../top/top.1:1071 ../top/top.1:1077 ../top/top.1:1082 ../top/top.1:1086
#: ../top/top.1:1091 ../top/top.1:2415 ../top/top.1:2438 ../top/top.1:2447
#: ../top/top.1:2463 ../top/top.1:2469 ../top/top.1:2475 ../top/top.1:2485
#: ../top/top.1:2502
#, no-wrap
msgid "\\(bu"
msgstr ""
#. type: Plain text
#: ../top/top.1:1076
msgid "As the on screen instructions indicate, you navigate among the fields with theB< Up> andB< Down> \\*(KAs. The PgUp, PgDn, Home and End keys can also be used to quickly reach the first or last available field."
msgstr ""
#. type: Plain text
#: ../top/top.1:1081
msgid "TheB< Right> \\*(KA selects a field for repositioning and theB< Left> \\*(KA or the E<lt>B<Enter>E<gt> key commits that field's placement."
msgstr ""
#. type: Plain text
#: ../top/top.1:1085
msgid "The `B<d>' key or the E<lt>B<Space>E<gt> bar toggles a field's display status, and thus the presence or absence of the asterisk."
msgstr ""
#. type: Plain text
#: ../top/top.1:1090
msgid "The `B<s>' key designates a field as the sort field. \\*(XT 4c. TASK AREA Commands, SORTING for additional information regarding your selection of a sort field."
msgstr ""
#. type: Plain text
#: ../top/top.1:1094
msgid "The `B<a>' and `B<w>' keys can be used to cycle through all available windows and the `B<q>' or E<lt>B<Esc>E<gt> keys exit Fields Management."
msgstr ""
#. type: Plain text
#: ../top/top.1:1103
msgid "The Fields Management screen can also be used to change the \\*(CG in either \\*(FM or \\*(AM. Whatever was targeted when `q' or E<lt>EscE<gt> was pressed will be made current as you return to the \\*(We display. \\*(XT 5. ALTERNATE-DISPLAY Provisions and the `g' \\*(CI for insight into \\*(CWs and \\*(FGs."
msgstr ""
#. type: Plain text
#: ../top/top.1:1110
msgid "\\*(NT Any window that has been scrolledI< horizontally> will be reset if any field changes are made via the Fields Management screen. AnyI< vertical> scrolled position, however, will not be affected. \\*(XT 5c. SCROLLING a Window for additional information regarding vertical and horizontal scrolling."
msgstr ""
#. ----------------------------------------------------------------------
#. type: SH
#: ../top/top.1:1112
#, no-wrap
msgid "4. INTERACTIVE Commands"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:1117
msgid "Listed below is a brief index of commands within categories. Some commands appear more than once \\*(Em their meaning or scope may vary depending on the context in which they are issued."
msgstr ""
#. type: Plain text
#: ../top/top.1:1137
#, no-wrap
msgid ""
" 4a.I< Global-Commands >\n"
" E<lt>Ent/SpE<gt> ?, =, 0,\n"
" A, B, d, E, e, g, h, H, I, k, q, r, s, W, X, Y, Z\n"
" 4b.I< Summary-Area-Commands >\n"
" C, l, t, m, 1, 2, 3, 4, !\n"
" 4c.I< Task-Area-Commands >\n"
" Appearance: b, J, j, x, y, z\n"
" Content: c, f, F, o, O, S, u, U, V, v\n"
" Size: #, i, n\n"
" Sorting: E<lt>, E<gt>, f, F, R\n"
" 4d.I< Color-Mapping >\n"
" E<lt>RetE<gt>, a, B, b, H, M, q, S, T, w, z, 0 - 7\n"
" 5b.I< Commands-for-Windows >\n"
" -, _, =, +, A, a, g, G, w\n"
" 5c.I< Scrolling-a-Window >\n"
" C, Up, Dn, Left, Right, PgUp, PgDn, Home, End\n"
" 5d.I< Searching-in-a-Window >\n"
" L, &\n"
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:1140
#, no-wrap
msgid "4a. GLOBAL Commands"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:1145
msgid "The global \\*(CIs areB< always> available in both \\*(FM and \\*(AM. However, some of these \\*(CIs areB< not available> when running in Secure mode."
msgstr ""
#. type: Plain text
#: ../top/top.1:1149
msgid "If you wish to know in advance whether or not your \\*(We has been secured, simply ask for help and view the system summary on the second line."
msgstr ""
#. type: TP
#: ../top/top.1:1150
#, no-wrap
msgid "\\ \\ E<lt>B<Enter>E<gt> or E<lt>B<Space>E<gt>\\ \\ :I<Refresh-Display >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1155
msgid "These commands awaken \\*(We and following receipt of any input the entire display will be repainted. They also force an update of any hotplugged \\*(Pu or \\*(MP changes."
msgstr ""
#. type: Plain text
#: ../top/top.1:1158
msgid "Use either of these keys if you have a large delay interval and wish to see current status,"
msgstr ""
#. type: TP
#: ../top/top.1:1159
#, no-wrap
msgid "\\ \\ \\ B<?> | B<h>\\ \\ :I<Help >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1164
msgid "There are two help levels available. The first will provide a reminder of all the basic \\*(CIs. If \\*(We isI< secured>, that screen will be abbreviated."
msgstr ""
#. type: Plain text
#: ../top/top.1:1167
msgid "Typing `h' or `?' on that help screen will take you to help for those \\*(CIs applicable to \\*(AM."
msgstr ""
#. type: TP
#: ../top/top.1:1168
#, no-wrap
msgid "\\ \\ \\ B<=>\\ \\ :I<Exit-Display-Limits >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1175
msgid "Removes restrictions on what is shown. This command will reverse any `i' (idle tasks), `n' (max tasks) and `v' (hide children) commands that might be active. It also provides for an exit from PID monitoring, User filtering, Other filtering, Locate processing and Combine Cpus mode."
msgstr ""
#. type: Plain text
#: ../top/top.1:1178
msgid "Additionally, if the window has been scrolled it will be reset with this command."
msgstr ""
#. type: TP
#: ../top/top.1:1179
#, no-wrap
msgid "\\ \\ \\ B<0>\\ \\ :I<Zero-Suppress> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1184
msgid "This command determines whether zeros are shown or suppressed for many of the fields in a \\*(TW. Fields like UID, GID, NI, PR or P are not affected by this toggle."
msgstr ""
#. type: TP
#: ../top/top.1:1185
#, no-wrap
msgid "\\ \\ \\ B<A>\\ \\ :I<Alternate-Display-Mode> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1190
msgid "This command will switch between \\*(FM and \\*(AM. \\*(XT 5. ALTERNATE-DISPLAY Provisions and the `g' \\*(CI for insight into \\*(CWs and \\*(FGs."
msgstr ""
#. type: TP
#: ../top/top.1:1191
#, no-wrap
msgid "\\ \\ \\ B<B>\\ \\ :I<Bold-Disable/Enable> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1197
msgid "This command will influence use of the bold terminfo capability and altersB< both> the \\*(SA and \\*(TA for the \\*(CW. While it is intended primarily for use with dumb terminals, it can be applied anytime."
msgstr ""
#. type: Plain text
#: ../top/top.1:1202
msgid "\\*(NT When this toggle is \\*O and \\*(We is operating in monochrome mode, theB< entire display> will appear as normal text. Thus, unless the `x' and/or `y' toggles are using reverse for emphasis, there will be no visual confirmation that they are even on."
msgstr ""
#. type: TP
#: ../top/top.1:1203
#, no-wrap
msgid "*\\ \\ B<d> | B<s>\\ \\ :I<Change-Delay-Time-interval >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1207
msgid "You will be prompted to enter the delay time, in seconds, between display updates."
msgstr ""
#. type: Plain text
#: ../top/top.1:1213
msgid "Fractional seconds are honored, but a negative number is not allowed. Entering 0 causes (nearly) continuous updates, with an unsatisfactory display as the system and tty driver try to keep up with \\*(We's demands. The delay value is inversely proportional to system loading, so set it with care."
msgstr ""
#. type: Plain text
#: ../top/top.1:1216
msgid "If at any time you wish to know the current delay time, simply ask for help and view the system summary on the second line."
msgstr ""
#. type: TP
#: ../top/top.1:1217
#, no-wrap
msgid "\\ \\ \\ B<E>\\ \\ :I<Enforce-Summary-Memory-Scale> in Summary Area"
msgstr ""
#. type: Plain text
#: ../top/top.1:1222
msgid "With this command you can cycle through the available \\*(SA memory scaling which ranges from KiB (kibibytes or 1,024 bytes) through EiB (exbibytes or 1,152,921,504,606,846,976 bytes)."
msgstr ""
#. type: Plain text
#: ../top/top.1:1226
msgid "If you see a `+' between a displayed number and the following label, it means that \\*(We was forced to truncate some portion of that number. By raising the scaling factor, such truncation can be avoided."
msgstr ""
#. type: TP
#: ../top/top.1:1227
#, no-wrap
msgid "\\ \\ \\ B<e>\\ \\ :I<Enforce-Task-Memory-Scale> in Task Area"
msgstr ""
#. type: Plain text
#: ../top/top.1:1232
msgid "With this command you can cycle through the available \\*(TA memory scaling which ranges from KiB (kibibytes or 1,024 bytes) through PiB (pebibytes or 1,125,899,906,842,624 bytes)."
msgstr ""
#. type: Plain text
#: ../top/top.1:1239
msgid "While \\*(We will try to honor the selected target range, additional scaling might still be necessary in order to accommodate current values. If you wish to see a more homogeneous result in the memory columns, raising the scaling range will usually accomplish that goal. Raising it too high, however, is likely to produce an all zero result which cannot be suppressed with the `0' \\*(CI."
msgstr ""
#. type: TP
#: ../top/top.1:1240
#, no-wrap
msgid "\\ \\ \\ B<g>\\ \\ :I<Choose-Another-Window/Field-Group >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1246
msgid "You will be prompted to enter a number between 1 and 4 designating the \\*(FG which should be made the \\*(CW. You will soon grow comfortable with these 4 windows, especially after experimenting with \\*(AM."
msgstr ""
#. type: TP
#: ../top/top.1:1247
#, no-wrap
msgid "\\ \\ \\ B<H>\\ \\ :I<Threads-mode> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1252
msgid "When this toggle is \\*O, individual threads will be displayed for all processes in all visible \\*(TWs. Otherwise, \\*(We displays a summation of all threads in each process."
msgstr ""
#. type: TP
#: ../top/top.1:1253
#, no-wrap
msgid "\\ \\ \\ B<I>\\ \\ :I<Irix/Solaris-Mode> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1258
msgid "When operating in Solaris mode (`I' toggled \\*F), a task's \\*(Pu usage will be divided by the total number of \\*(PUs. After issuing this command, you'll be told the new state of this toggle."
msgstr ""
#. type: TP
#: ../top/top.1:1259
#, no-wrap
msgid "*\\ \\ B<k>\\ \\ :I<Kill-a-task >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1262
msgid "You will be prompted for a PID and then the signal to send."
msgstr ""
#. type: Plain text
#: ../top/top.1:1266 ../top/top.1:1288
msgid "Entering no PID or a negative number will be interpreted as the default shown in the prompt (the first task displayed). A PID value of zero means the \\*(We program itself."
msgstr ""
#. type: Plain text
#: ../top/top.1:1269
msgid "The default signal, as reflected in the prompt, is SIGTERM. However, you can send any signal, via number or name."
msgstr ""
#. type: Plain text
#: ../top/top.1:1272
msgid "If you wish to abort the kill process, do one of the following depending on your progress:"
msgstr ""
#. type: Plain text
#: ../top/top.1:1276
#, no-wrap
msgid ""
" 1) at the pid prompt, type an invalid number\n"
" 2) at the signal prompt, type 0 (or any invalid signal)\n"
" 3) at any prompt, type E<lt>EscE<gt>\n"
msgstr ""
#. type: TP
#: ../top/top.1:1278
#, no-wrap
msgid "\\ \\ \\ B<q>\\ \\ :I<Quit >"
msgstr ""
#. type: TP
#: ../top/top.1:1281
#, no-wrap
msgid "*\\ \\ B<r>\\ \\ :I<Renice-a-Task >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1284
msgid "You will be prompted for a PID and then the value to nice it to."
msgstr ""
#. type: Plain text
#: ../top/top.1:1294
msgid "A positive nice value will cause a process to lose priority. Conversely, a negative nice value will cause a process to be viewed more favorably by the kernel. As a general rule, ordinary users can only increase the nice value and are prevented from lowering it."
msgstr ""
#. type: Plain text
#: ../top/top.1:1297
msgid "If you wish to abort the renice process, do one of the following depending on your progress:"
msgstr ""
#. type: Plain text
#: ../top/top.1:1301
#, no-wrap
msgid ""
" 1) at the pid prompt, type an invalid number\n"
" 2) at the nice prompt, type E<lt>EnterE<gt> with no input\n"
" 3) at any prompt, type E<lt>EscE<gt>\n"
msgstr ""
#. type: TP
#: ../top/top.1:1303
#, no-wrap
msgid "\\ \\ \\ B<W>\\ \\ :I<Write-the-Configuration-File >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1309
msgid "This will save all of your options and toggles plus the current display mode and delay time. By issuing this command just before quitting \\*(We, you will be able restart later in exactly that same state."
msgstr ""
#. type: TP
#: ../top/top.1:1310
#, no-wrap
msgid "\\ \\ \\ B<X>\\ \\ :I<Extra-Fixed-Width >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1315
msgid "Some fields are fixed width and not scalable. As such, they are subject to truncation which would be indicated by a `+' in the last position."
msgstr ""
#. type: Plain text
#: ../top/top.1:1317
msgid "This \\*(CI can be used to alter the widths of the following fields:"
msgstr ""
#. type: Plain text
#: ../top/top.1:1327
#, no-wrap
msgid ""
" I< field default field default field default >\n"
" GID 5 GROUP 8 WCHAN 10\n"
" RUID 5 LXC 8 nsIPC 10\n"
" SUID 5 RUSER 8 nsMNT 10\n"
" UID 5 SUSER 8 nsNET 10\n"
" TTY 8 nsPID 10\n"
" USER 8 nsUSER 10\n"
" nsUTS 10\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:1332
msgid "You will be prompted for the amount to be added to the default widths shown above. Entering zero forces a return to those defaults."
msgstr ""
#. type: Plain text
#: ../top/top.1:1337
msgid "If you enter a negative number, \\*(We will automatically increase the column size as needed until there is no more truncated data. You can accelerate this process by reducing the delay interval or holding down the E<lt>SpaceE<gt> bar."
msgstr ""
#. type: Plain text
#: ../top/top.1:1341
msgid "\\*(NT Whether explicitly or automatically increased, the widths for these fields are never decreased by \\*(We. To narrow them you must specify a smaller number or restore the defaults."
msgstr ""
#. type: TP
#: ../top/top.1:1342
#, no-wrap
msgid "\\ \\ \\ B<Y>\\ \\ :I<Inspect-Other-Output >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1348
msgid "After issuing the `Y' \\*(CI, you will be prompted for a target PID. Typing a value or accepting the default results in a separate screen. That screen can be used to view a variety of files or piped command output while the normal \\*(We iterative display is paused."
msgstr ""
#. type: Plain text
#: ../top/top.1:1352
msgid "\\*(NT This \\*(CI is only fully realized when supporting entries have been manually added to the end of the \\*(We \\*(CF. For details on creating those entries, \\*(Xt 6b. ADDING INSPECT Entries."
msgstr ""
#. type: Plain text
#: ../top/top.1:1359
msgid "Most of the keys used to navigate the Inspect feature are reflected in its header prologue. There are, however, additional keys available once you have selected a particular file or command. They are familiar to anyone who has used the pager `less' and are summarized here for future reference."
msgstr ""
#. type: Plain text
#: ../top/top.1:1369
#, no-wrap
msgid ""
" I< key function >\n"
" = alternate status-line, file or pipeline\n"
" / find, equivalent to `L' locate\n"
" n find next, equivalent to `&' locate next\n"
" E<lt>SpaceE<gt> scroll down, equivalent to E<lt>PgDnE<gt>\n"
" b scroll up, equivalent to E<lt>PgUpE<gt>\n"
" g first line, equivalent to E<lt>HomeE<gt>\n"
" G last line, equivalent to E<lt>EndE<gt>\n"
msgstr ""
#. type: TP
#: ../top/top.1:1371
#, no-wrap
msgid "\\ \\ \\ B<Z>\\ \\ :I<Change-Color-Mapping >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1376
msgid "This key will take you to a separate screen where you can change the colors for the \\*(CW, or for all windows. For details regarding this \\*(CI \\*(Xt 4d. COLOR Mapping."
msgstr ""
#. type: IP
#: ../top/top.1:1377 ../top/top.1:1866
#, no-wrap
msgid "*"
msgstr ""
#. type: Plain text
#: ../top/top.1:1380
msgid "The commands shown with an \\*(AK are not available in Secure mode, nor will they be shown on the level-1 help screen."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:1382
#, no-wrap
msgid "4b. SUMMARY AREA Commands"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:1387
msgid "The \\*(SA \\*(CIs areB< always available> in both \\*(FM and \\*(AM. They affect the beginning lines of your display and will determine the position of messages and prompts."
msgstr ""
#. type: Plain text
#: ../top/top.1:1391
msgid "These commands always impact just the \\*(CG. \\*(XT 5. ALTERNATE-DISPLAY Provisions and the `g' \\*(CI for insight into \\*(CWs and \\*(FGs."
msgstr ""
#. type: TP
#: ../top/top.1:1392
#, no-wrap
msgid "\\ \\ \\ B<C>\\ \\ :I<Show-scroll-coordinates> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1397
msgid "Toggle an informational message which is displayed whenever the message line is not otherwise being used. For additional information \\*(Xt 5c. SCROLLING a Window."
msgstr ""
#. type: TP
#: ../top/top.1:1398
#, no-wrap
msgid "\\ \\ \\ B<l>\\ \\ :I<Load-Average/Uptime> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1402
msgid "This is also the line containing the program name (possibly an alias) when operating in \\*(FM or the \\*(CW name when operating in \\*(AM."
msgstr ""
#. type: TP
#: ../top/top.1:1403
#, no-wrap
msgid "\\ \\ \\ B<t>\\ \\ :I<Task/Cpu-States> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1408
msgid "This command affects from 2 to many \\*(SA lines, depending on the state of the `1', `2' or `3' \\*(CTs and whether or not \\*(We is running under true SMP."
msgstr ""
#. type: Plain text
#: ../top/top.1:1411
msgid "This portion of the \\*(SA is also influenced by the `H' \\*(CI toggle, as reflected in the total label which shows either Tasks or Threads."
msgstr ""
#. type: Plain text
#: ../top/top.1:1413 ../top/top.1:1430
msgid "This command serves as a 4-way toggle, cycling through these modes:"
msgstr ""
#. type: Plain text
#: ../top/top.1:1418
#, no-wrap
msgid ""
" 1. detailed percentages by category\n"
" 2. abbreviated user/system and total % + bar graph\n"
" 3. abbreviated user/system and total % + block graph\n"
" 4. turn off task and cpu states display\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:1423
msgid "When operating in either of the graphic modes, the display becomes much more meaningful when individual CPUs or NUMA nodes are also displayed. \\*(XC the `1', `2' and `3' commands below for additional information."
msgstr ""
#. type: TP
#: ../top/top.1:1424
#, no-wrap
msgid "\\ \\ \\ B<m>\\ \\ :I<Memory/Swap-Usage> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1428
msgid "This command affects the two \\*(SA lines dealing with physical and virtual memory."
msgstr ""
#. type: Plain text
#: ../top/top.1:1435
#, no-wrap
msgid ""
" 1. detailed percentages by memory type\n"
" 2. abbreviated % used/total available + bar graph\n"
" 3. abbreviated % used/total available + block graph\n"
" 4. turn off memory display\n"
msgstr ""
#. type: TP
#: ../top/top.1:1437
#, no-wrap
msgid "\\ \\ \\ B<1>\\ \\ :I<Single/Separate-Cpu-States> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1442
msgid "This command affects how the `t' command's Cpu States portion is shown. Although this toggle exists primarily to serve massively-parallel SMP machines, it is not restricted to solely SMP environments."
msgstr ""
#. type: Plain text
#: ../top/top.1:1447
msgid "When you see `%Cpu(s):' in the \\*(SA, the `1' toggle is \\*O and all \\*(Pu information is gathered in a single line. Otherwise, each \\*(Pu is displayed separately as: `%Cpu0, %Cpu1, ...' up to available screen height."
msgstr ""
#. type: TP
#: ../top/top.1:1448
#, no-wrap
msgid "\\ \\ \\ B<2>\\ \\ :I<NUMA-Nodes/Cpu-Summary> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1453
msgid "This command toggles between the `1' command cpu summary display (only) or a summary display plus the cpu usage statistics for each NUMA Node. It is only available if a system has the requisite NUMA support."
msgstr ""
#. type: TP
#: ../top/top.1:1454
#, no-wrap
msgid "\\ \\ \\ B<3>\\ \\ :I<Expand-NUMA-Node >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1460
msgid "You will be invited to enter a number representing a NUMA Node. Thereafter, a node summary plus the statistics for each cpu in that node will be shown until the `1', `2' or `4' \\*(CT is pressed. This \\*(CI is only available if a system has the requisite NUMA support."
msgstr ""
#. type: TP
#: ../top/top.1:1461
#, no-wrap
msgid "\\ \\ \\ B<4>\\ \\ :I<Display-Cpus-Two-Abreast >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1468
msgid "This command turns the `1' toggle \\*F for individual \\*(Pu display but prints the results two abreast. It requires a terminal with a minimum width of 80 columns. If a terminal's width is decreased below the minimum while \\*(We is running, \\*(We reverts to the normal `1' toggle \\*F state."
msgstr ""
#. type: Plain text
#: ../top/top.1:1472
msgid "To avoid truncation when displaying detailed \\*(Pu statistcs, as opposed to the graphic representations, a minimum width of 165 columns would be required."
msgstr ""
#. type: TP
#: ../top/top.1:1473
#, no-wrap
msgid "\\ \\ \\ B<!>\\ \\ :I<Combine-Cpus-Mode >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1479
msgid "This \\*(CT is intended for massively parallel SMP environments where, even with the `4' \\*(CT, not all processors can be displayed. With each press of `!' the number of additional \\*(Pu's combined is doubled thus reducing the total number of \\*(Pu lines displayed."
msgstr ""
#. type: Plain text
#: ../top/top.1:1487
msgid "For example, with the first press of `!' one additional \\*(Pu will be combined and displayed as `0-1, 2-3, ...' instead of the normal `%Cpu0, %Cpu1, %Cpu2, %Cpu3, ...'. With a second `!' \\*(CT two additional \\*(Pus are combined and shown as `0-2, 3-5, ...'. Then the third '!' press, combining four additional \\*(Pus, shows as `0-4, 5-9, ...', etc."
msgstr ""
#. type: Plain text
#: ../top/top.1:1491
msgid "Such progression continues until individual \\*(Pus are again displayed and impacts both the `1' and `4' toggles (one or two columns). Use the `=' command to exit B<Combine Cpus> mode."
msgstr ""
#. type: Plain text
#: ../top/top.1:1497
msgid "\\*(NT If the entire \\*(SA has been toggled \\*F for any window, you would be left with just theB< message line>. In that way, you will have maximized available task rows but (temporarily) sacrificed the program name in \\*(FM or the \\*(CW name when in \\*(AM."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:1499
#, no-wrap
msgid "4c. TASK AREA Commands"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:1502
msgid "The \\*(TA \\*(CIs areB< always> available in \\*(FM."
msgstr ""
#. type: Plain text
#: ../top/top.1:1505
msgid "The \\*(TA \\*(CIs areB< never available> in \\*(AMI< if> the \\*(CW's \\*(TD has been toggled \\*F (\\*(Xt 5. ALTERNATE-DISPLAY Provisions)."
msgstr ""
#. type: Plain text
#: ../top/top.1:1509
msgid "B<APPEARANCE> of \\*(TW"
msgstr ""
#. type: TP
#: ../top/top.1:1510
#, no-wrap
msgid "\\ \\ \\ B<J>\\ \\ :I<Justify-Numeric-Columns> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1516
msgid "Alternates between right-justified (the default) and left-justified numeric data. If the numeric data completely fills the available column, this \\*(CT may impact the column header only."
msgstr ""
#. type: TP
#: ../top/top.1:1517
#, no-wrap
msgid "\\ \\ \\ B<j>\\ \\ :I<Justify-Character-Columns> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1523
msgid "Alternates between left-justified (the default) and right-justified character data. If the character data completely fills the available column, this \\*(CT may impact the column header only."
msgstr ""
#. type: Plain text
#: ../top/top.1:1528
msgid "The following commands will also be influenced by the state of the global `B' (bold enable) toggle."
msgstr ""
#. type: TP
#: ../top/top.1:1530
#, no-wrap
msgid "\\ \\ \\ B<b>\\ \\ :I<Bold/Reverse> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1535
msgid "This command will impact how the `x' and `y' toggles are displayed. It may also impact the \\*(SA when a bar graph has been selected for \\*(Pu states or memory usage via the `t' or `m' toggles."
msgstr ""
#. type: TP
#: ../top/top.1:1536
#, no-wrap
msgid "\\ \\ \\ B<x>\\ \\ :I<Column-Highlight> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1544
#, no-wrap
msgid ""
"Changes highlighting for the current sort field.\n"
"If you forget which field is being sorted this command can serve as a quick\n"
"visual reminder, providing the sort field is being displayed.\n"
"The sort field mightI< not> be visible because:\n"
" 1) there is insufficientI< Screen Width >\n"
" 2) the `f' \\*(CI turned it \\*F\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:1549
msgid "\\*(NT Whenever Searching and/or Other Filtering is active in a window, column highlighting is temporarily disabled. \\*(XC notes at the end of topics 5d. SEARCHING and 5e. FILTERING for an explanation why."
msgstr ""
#. type: TP
#: ../top/top.1:1550
#, no-wrap
msgid "\\ \\ \\ B<y>\\ \\ :I<Row-Highlight> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1555
msgid "Changes highlighting for \"running\" tasks. For additional insight into this task state, \\*(Xt 3a. DESCRIPTIONS of Fields, the `S' field (Process Status)."
msgstr ""
#. type: Plain text
#: ../top/top.1:1558
msgid "Use of this provision provides important insight into your system's health. The only costs will be a few additional tty escape sequences."
msgstr ""
#. type: TP
#: ../top/top.1:1559
#, no-wrap
msgid "\\ \\ \\ B<z>\\ \\ :I<Color/Monochrome> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1565
msgid "Switches the \\*(CW between your last used color scheme and the older form of black-on-white or white-on-black. This command will alterB< both> the \\*(SA and \\*(TA but does not affect the state of the `x', `y' or `b' toggles."
msgstr ""
#. type: Plain text
#: ../top/top.1:1569
msgid "B<CONTENT> of \\*(TW"
msgstr ""
#. type: TP
#: ../top/top.1:1570
#, no-wrap
msgid "\\ \\ \\ B<c>\\ \\ :I<Command-Line/Program-Name> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1575
msgid "This command will be honored whether or not the COMMAND column is currently visible. Later, should that field come into view, the change you applied will be seen."
msgstr ""
#. type: TP
#: ../top/top.1:1576 ../top/top.1:1718
#, no-wrap
msgid "\\ \\ \\ B<f> | B<F>\\ \\ :I<Fields-Management >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1582
msgid "These keys display a separate screen where you can change which fields are displayed, their order and also designate the sort field. For additional information on these \\*(CIs \\*(Xt 3b. MANAGING Fields."
msgstr ""
#. type: TP
#: ../top/top.1:1583
#, no-wrap
msgid "\\ \\ \\ B<o> | B<O>\\ \\ :I<Other-Filtering >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1589
msgid "You will be prompted for the selection criteria which then determines which tasks will be shown in the \\*(CW. Your criteria can be made case sensitive or case can be ignored. And you determine if \\*(We should include or exclude matching tasks."
msgstr ""
#. type: Plain text
#: ../top/top.1:1592
msgid "\\*(XT 5e. FILTERING in a window for details on these and additional related \\*(CIs."
msgstr ""
#. type: TP
#: ../top/top.1:1593
#, no-wrap
msgid "\\ \\ \\ B<S>\\ \\ :I<Cumulative-Time-Mode> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1597
msgid "When Cumulative mode is \\*O, each process is listed with the \\*(Pu time that it and its dead children have used."
msgstr ""
#. type: Plain text
#: ../top/top.1:1604
msgid "When \\*F, programs that fork into many separate tasks will appear less demanding. For programs like `init' or a shell this is appropriate but for others, like compilers, perhaps not. Experiment with two \\*(TWs sharing the same sort field but with different `S' states and see which representation you prefer."
msgstr ""
#. type: Plain text
#: ../top/top.1:1608
msgid "After issuing this command, you'll be informed of the new state of this toggle. If you wish to know in advance whether or not Cumulative mode is in effect, simply ask for help and view the window summary on the second line."
msgstr ""
#. type: TP
#: ../top/top.1:1609
#, no-wrap
msgid "\\ \\ \\ B<u> | B<U>\\ \\ :I<Show-Specific-User-Only >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1614
msgid "You will be prompted for theB< uid> orB< name> of the user to display. The -u option matches on B< effective> user whereas the -U option matches onB< any> user (real, effective, saved, or filesystem)."
msgstr ""
#. type: Plain text
#: ../top/top.1:1619
msgid "Thereafter, in that \\*(TW only matching users will be shown, or possibly no processes will be shown. Prepending an exclamation point (`!') to the user id or name instructs \\*(We to display only processes with users not matching the one provided."
msgstr ""
#. type: Plain text
#: ../top/top.1:1623
msgid "Different \\*(TWs can be used to filter different users. Later, if you wish to monitor all users again in the \\*(CW, re-issue this command but just press E<lt>EnterE<gt> at the prompt."
msgstr ""
#. type: TP
#: ../top/top.1:1624
#, no-wrap
msgid "\\ \\ \\ B<V>\\ \\ :I<Forest-View-Mode> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1631
msgid "In this mode, processes are reordered according to their parents and the layout of the COMMAND column resembles that of a tree. In forest view mode it is still possible to toggle between program name and command line (\\*(Xc `c' \\*(CI) or between processes and threads (\\*(Xc `H' \\*(CI)."
msgstr ""
#. type: Plain text
#: ../top/top.1:1635
msgid "\\*(NT Typing any key affecting the sort order will exit forest view mode in the \\*(CW. \\*(XT 4c. TASK AREA Commands, SORTING for information on those keys."
msgstr ""
#. type: TP
#: ../top/top.1:1636
#, no-wrap
msgid "\\ \\ \\ B<v>\\ \\ :I<Hide/Show-Children> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1640
msgid "When in forest view mode, this key serves as a toggle to collapse or expand the children of a parent."
msgstr ""
#. type: Plain text
#: ../top/top.1:1644
msgid "The toggle is applied against the first (topmost) process in the \\*(CW. \\*(XT 5c. SCROLLING a Window for additional information regarding vertical scrolling."
msgstr ""
#. type: Plain text
#: ../top/top.1:1647
msgid "If the target process has not forked any children, this key has no effect. It also has no effect when not in forest view mode."
msgstr ""
#. type: Plain text
#: ../top/top.1:1651
msgid "B<SIZE> of \\*(TW"
msgstr ""
#. type: TP
#: ../top/top.1:1652
#, no-wrap
msgid "\\ \\ \\ B<i>\\ \\ :I<Idle-Process> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1660
msgid "Displays all tasks or just active tasks. When this toggle is \\*F, tasks that have not used any \\*(PU since the last update will not be displayed. However, due to the granularity of the %CPU and TIME+ fields, some processes may still be displayed thatI< appear> to have usedI< no> \\*(PU."
msgstr ""
#. type: Plain text
#: ../top/top.1:1663
msgid "If this command is applied to the last \\*(TD when in \\*(AM, then it will not affect the window's size, as all prior \\*(TDs will have already been painted."
msgstr ""
#. type: TP
#: ../top/top.1:1664
#, no-wrap
msgid "\\ \\ \\ B<n> | B<#>\\ \\ :I<Set-Maximum-Tasks >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1668
msgid "You will be prompted to enter the number of tasks to display. The lessor of your number and available screen rows will be used."
msgstr ""
#. type: Plain text
#: ../top/top.1:1673
msgid "When used in \\*(AM, this is the command that gives you precise control over the size of each currently visible \\*(TD, except for the very last. It will not affect the last window's size, as all prior \\*(TDs will have already been painted."
msgstr ""
#. type: Plain text
#: ../top/top.1:1676
msgid "\\*(NT If you wish to increase the size of the last visible \\*(TD when in \\*(AM, simply decrease the size of the \\*(TD(s) above it."
msgstr ""
#. type: Plain text
#: ../top/top.1:1680
msgid "B<SORTING> of \\*(TW"
msgstr ""
#. type: Plain text
#: ../top/top.1:1685
msgid "For compatibility, this \\*(We supports most of the former \\*(We sort keys. Since this is primarily a service to former \\*(We users, these commands do not appear on any help screen."
msgstr ""
#. type: Plain text
#: ../top/top.1:1692
#, no-wrap
msgid ""
" I< command sorted-field supported >\n"
" A start time (non-display) B< No >\n"
" M %MEM Yes\n"
" N PID Yes\n"
" P %CPU Yes\n"
" T TIME+ Yes\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:1697
msgid "Before using any of the following sort provisions, \\*(We suggests that you temporarily turn on column highlighting using the `x' \\*(CI. That will help ensure that the actual sort environment matches your intent."
msgstr ""
#. type: Plain text
#: ../top/top.1:1703
#, no-wrap
msgid ""
"The following \\*(CIs willB< only> be honored when the current sort field\n"
"isB< visible>.\n"
"The sort field mightI< not> be visible because:\n"
" 1) there is insufficientI< Screen Width >\n"
" 2) the `f' \\*(CI turned it \\*F\n"
msgstr ""
#. type: TP
#: ../top/top.1:1704
#, no-wrap
msgid "\\ \\ \\ B<E<lt>>\\ \\ :I<Move-Sort-Field-Left >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1708
msgid "Moves the sort column to the left unless the current sort field is the first field being displayed."
msgstr ""
#. type: TP
#: ../top/top.1:1709
#, no-wrap
msgid "\\ \\ \\ B<E<gt>>\\ \\ :I<Move-Sort-Field-Right >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1713
msgid "Moves the sort column to the right unless the current sort field is the last field being displayed."
msgstr ""
#. type: Plain text
#: ../top/top.1:1717
msgid "The following \\*(CIs willB< always> be honored whether or not the current sort field is visible."
msgstr ""
#. type: Plain text
#: ../top/top.1:1724
msgid "These keys display a separate screen where you can change which field is used as the sort column, among other functions. This can be a convenient way to simply verify the current sort field, when running \\*(We with column highlighting turned \\*F."
msgstr ""
#. type: TP
#: ../top/top.1:1725
#, no-wrap
msgid "\\ \\ \\ B<R>\\ \\ :I<Reverse/Normal-Sort-Field> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1728
msgid "Using this \\*(CI you can alternate between high-to-low and low-to-high sorts."
msgstr ""
#. type: Plain text
#: ../top/top.1:1732
msgid "\\*(NT Field sorting uses internal values, not those in column display. Thus, the TTY and WCHAN fields will violate strict ASCII collating sequence."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:1735
#, no-wrap
msgid "4d. COLOR Mapping"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:1740
msgid "When you issue the `Z' \\*(CI, you will be presented with a separate screen. That screen can be used to change the colors in just the \\*(CW or in all four windows before returning to the \\*(We display."
msgstr ""
#. type: Plain text
#: ../top/top.1:1743
msgid "The following \\*(CIs are available."
msgstr ""
#. type: Plain text
#: ../top/top.1:1754
#, no-wrap
msgid ""
" B<4> upper case letters to select aB< target >\n"
" B<8> numbers to select aB< color >\n"
" normal toggles available \n"
" B :bold disable/enable\n"
" b :running tasks \"bold\"/reverse\n"
" z :color/mono\n"
" other commands available \n"
" a/w :apply, then go to next/prior\n"
" E<lt>EnterE<gt> :apply and exit\n"
" q :abandon current changes and exit\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:1760
msgid "If you use `a' or `w' to cycle the targeted window, you will have applied the color scheme that was displayed when you left that window. You can, of course, easily return to any window and reapply different colors or turn colors \\*F completely with the `z' toggle."
msgstr ""
#. type: Plain text
#: ../top/top.1:1765
msgid "The Color Mapping screen can also be used to change the \\*(CG in either \\*(FM or \\*(AM. Whatever was targeted when `q' or E<lt>EnterE<gt> was pressed will be made current as you return to the \\*(We display."
msgstr ""
#. ----------------------------------------------------------------------
#. type: SH
#: ../top/top.1:1767
#, no-wrap
msgid "5. ALTERNATE-DISPLAY Provisions"
msgstr ""
#. ----------------------------------------------------------------------
#. ......................................................................
#. type: SS
#: ../top/top.1:1770
#, no-wrap
msgid "5a. WINDOWS Overview"
msgstr ""
#. type: TP
#: ../top/top.1:1772
#, no-wrap
msgid "B<Field Groups/Windows>:"
msgstr ""
#. type: Plain text
#: ../top/top.1:1779
msgid "In \\*(FM there is a single window represented by the entire screen. That single window can still be changed to display 1 of 4 differentB< field groups> (\\*(Xc `g' \\*(CI, repeated below). Each of the 4 \\*(FGs has a unique separately configurableB< \\*(SA > and its own configurableB< \\*(TA>."
msgstr ""
#. type: Plain text
#: ../top/top.1:1782
msgid "In \\*(AM, those 4 underlying \\*(FGs can now be made visible simultaneously, or can be turned \\*F individually at your command."
msgstr ""
#. type: Plain text
#: ../top/top.1:1787
msgid "The \\*(SA will always exist, even if it's only the message line. At any given time onlyI< one> \\*(SA can be displayed. However, depending on your commands, there could be fromI< zero > toI< four> separate \\*(TDs currently showing on the screen."
msgstr ""
#. type: TP
#: ../top/top.1:1788
#, no-wrap
msgid "B<Current Window>:"
msgstr ""
#. type: Plain text
#: ../top/top.1:1794
msgid "The \\*(CW is the window associated with the \\*(SA and the window to which task related commands are always directed. Since in \\*(AM you can toggle the \\*(TD \\*F, some commands might be restricted for the \\*(CW."
msgstr ""
#. type: Plain text
#: ../top/top.1:1799
msgid "A further complication arises when you have toggled the first \\*(SA line \\*F. With the loss of the window name (the `l' toggled line), you'll not easily know what window is the \\*(CW."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:1801
#, no-wrap
msgid "5b. COMMANDS for Windows"
msgstr ""
#. type: TP
#: ../top/top.1:1803
#, no-wrap
msgid "\\ \\ \\ B<-> | B<_>\\ \\ :I<Show/Hide-Window(s)> toggles "
msgstr ""
#. type: Plain text
#: ../top/top.1:1810
msgid "The `-' key turns the \\*(CW's \\*(TD \\*O and \\*F. When \\*O, that \\*(TA will show a minimum of the columns header you've established with the `f' \\*(CI. It will also reflect any other \\*(TA options/toggles you've applied yielding zero or more tasks."
msgstr ""
#. type: Plain text
#: ../top/top.1:1816
msgid "The `_' key does the same for all \\*(TDs. In other words, it switches between the currently visible \\*(TD(s) and any \\*(TD(s) you had toggled \\*F. If all 4 \\*(TDs are currently visible, this \\*(CI will leave the \\*(SA as the only display element."
msgstr ""
#. type: TP
#: ../top/top.1:1817
#, no-wrap
msgid "*\\ \\ B<=> | B<+>\\ \\ :I<Equalize/Reset-Window(s) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1826
msgid "The `=' key forces the \\*(CW's \\*(TD to be visible. It also reverses any active `i' (idle tasks), `n' (max tasks), `u/U' (user filter), `o/O' (other filter), `v' (hide children), `L' (locate) and `!' (combine cpus) commands. Also, if the window had been scrolled, it will be reset with this command. \\*(XT 5c. SCROLLING a Window for additional information regarding vertical and horizontal scrolling."
msgstr ""
#. type: Plain text
#: ../top/top.1:1831
msgid "The `+' key does the same for all windows. The four \\*(TDs will reappear, evenly balanced, while retaining any customizations previously applied beyond those noted for the `=' \\*(CT."
msgstr ""
#. type: TP
#: ../top/top.1:1832
#, no-wrap
msgid "*\\ \\ B<A>\\ \\ :I<Alternate-Display-Mode> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1835
msgid "This command will switch between \\*(FM and \\*(AM."
msgstr ""
#. type: Plain text
#: ../top/top.1:1839
msgid "The first time you issue this command, all four \\*(TDs will be shown. Thereafter when you switch modes, you will see only the \\*(TD(s) you've chosen to make visible."
msgstr ""
#. type: TP
#: ../top/top.1:1840
#, no-wrap
msgid "*\\ \\ B<a> | B<w>\\ \\ :I<Next-Window-Forward/Backward >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1846
msgid "This will change the \\*(CW, which in turn changes the window to which commands are directed. These keys act in a circular fashion so you can reach any desired window using either key."
msgstr ""
#. type: Plain text
#: ../top/top.1:1850
msgid "Assuming the window name is visible (you have not toggled `l' \\*F), whenever the \\*(CW name loses its emphasis/color, that's a reminder the \\*(TD is \\*F and many commands will be restricted."
msgstr ""
#. type: TP
#: ../top/top.1:1851
#, no-wrap
msgid "*\\ \\ B<g>\\ \\ :I<Choose-Another-Window/Field-Group >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1855
msgid "You will be prompted to enter a number between 1 and 4 designating the \\*(FG which should be made the \\*(CW."
msgstr ""
#. type: Plain text
#: ../top/top.1:1859
msgid "In \\*(FM, this command is necessary to alter the \\*(CW. In \\*(AM, it is simply a less convenient alternative to the `a' and `w' commands."
msgstr ""
#. type: TP
#: ../top/top.1:1860
#, no-wrap
msgid "\\ \\ \\ B<G>\\ \\ :I<Change-Window/Field-Group-Name >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1865
msgid "You will be prompted for a new name to be applied to the \\*(CW. It does not require that the window name be visible (the `l' toggle to be \\*O)."
msgstr ""
#. type: Plain text
#: ../top/top.1:1868
msgid "The \\*(CIs shown with an \\*(AK have use beyond \\*(AM."
msgstr ""
#. type: Plain text
#: ../top/top.1:1872
#, no-wrap
msgid ""
" =, A, g are always available\n"
" a, w act the same with color mapping\n"
" and fields management\n"
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:1875
#, no-wrap
msgid "5c. SCROLLING a Window"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:1881
msgid "Typically a \\*(TW is a partial view into a systems's total tasks/threads which shows only some of the available fields/columns. With these \\*(KSs, you can move that view vertically or horizontally to reveal any desired task or column."
msgstr ""
#. type: TP
#: ../top/top.1:1882
#, no-wrap
msgid "B<Up>,B<PgUp>\\ \\ :I<Scroll-Tasks >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1888
msgid "Move the view up toward the first task row, until the first task is displayed at the top of the \\*(CW. The I<Up> \\*(KA moves a single line while I<PgUp> scrolls the entire window."
msgstr ""
#. type: TP
#: ../top/top.1:1889
#, no-wrap
msgid "B<Down>,B<PgDn>\\ \\ :I<Scroll-Tasks >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1895
msgid "Move the view down toward the last task row, until the last task is the only task displayed at the top of the \\*(CW. The I<Down> \\*(KA moves a single line while I<PgDn> scrolls the entire window."
msgstr ""
#. type: TP
#: ../top/top.1:1896
#, no-wrap
msgid "B<Left>,B<Right>\\ \\ :I<Scroll-Columns >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1899
msgid "Move the view of displayable fields horizontally one column at a time."
msgstr ""
#. type: Plain text
#: ../top/top.1:1904
msgid "\\*(NT As a reminder, some fields/columns are not fixed-width but allocated all remaining screen width when visible. When scrolling right or left, that feature may produce some unexpected results initially."
msgstr ""
#. type: Plain text
#: ../top/top.1:1910
msgid "Additionally, there are special provisions for any variable width field when positioned as the last displayed field. Once that field is reached via the right arrow key, and is thus the only column shown, you can continue scrolling horizontally within such a field. \\*(XC `C' \\*(CI below for additional information."
msgstr ""
#. type: TP
#: ../top/top.1:1911
#, no-wrap
msgid "B<Home>\\ \\ :I<Jump-to-Home-Position >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1914
msgid "Reposition the display to the un-scrolled coordinates."
msgstr ""
#. type: TP
#: ../top/top.1:1915
#, no-wrap
msgid "B<End>\\ \\ :I<Jump-to-End-Position >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1919
msgid "Reposition the display so that the rightmost column reflects the last displayable field and the bottom task row represents the last task."
msgstr ""
#. type: Plain text
#: ../top/top.1:1924
msgid "\\*(NT From this position it is still possible to scrollI< down> andI< right> using the \\*(KAs. This is true until a single column and a single task is left as the only display element."
msgstr ""
#. type: TP
#: ../top/top.1:1925
#, no-wrap
msgid "B<C>\\ \\ :I<Show-scroll-coordinates> toggle "
msgstr ""
#. type: Plain text
#: ../top/top.1:1931
msgid "Toggle an informational message which is displayed whenever the message line is not otherwise being used. That message will take one of two forms depending on whether or not a variable width column has also been scrolled."
msgstr ""
#. type: Plain text
#: ../top/top.1:1935
#, no-wrap
msgid ""
" B<scroll coordinates: y = n/n (tasks), x = n/n (fields)>\n"
" scroll coordinates: y = n/n (tasks), x = n/n (fields)B< + nn>\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:1943
msgid "The coordinates shown as B<n>/B<n> are relative to the upper left corner of the \\*(CW. The additional `B<+\\ nn>' represents the displacement into a variable width column when it has been scrolled horizontally. Such displacement occurs in normal 8 character tab stop amounts via the right and left arrow keys."
msgstr ""
#. type: TP
#: ../top/top.1:1945
#, no-wrap
msgid "B<y = n/n (tasks) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1950
msgid "The first B<n> represents the topmost visible task and is controlled by \\*(KSs. The second B<n> is updated automatically to reflect total tasks."
msgstr ""
#. type: TP
#: ../top/top.1:1951
#, no-wrap
msgid "B<x = n/n (fields) >"
msgstr ""
#. type: Plain text
#: ../top/top.1:1957
msgid "The first B<n> represents the leftmost displayed column and is controlled by \\*(KSs. The second B<n> is the total number of displayable fields and is established with the `B<f>' \\*(CI."
msgstr ""
#. type: Plain text
#: ../top/top.1:1962 ../top/top.1:2021
msgid "The above \\*(CIs areB< always> available in \\*(FM butB< never> available in \\*(AM if the \\*(CW's \\*(TD has been toggled \\*F."
msgstr ""
#. type: Plain text
#: ../top/top.1:1966
msgid "\\*(NT When any form of filtering is active, you can expect some slight aberrations when scrolling since not all tasks will be visible. This is particularly apparent when using the Up/Down \\*(KAs."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:1968
#, no-wrap
msgid "5d. SEARCHING in a Window"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:1971
msgid "You can use these \\*(CIs to locate a task row containing a particular value."
msgstr ""
#. type: TP
#: ../top/top.1:1972
#, no-wrap
msgid "B<L>\\ \\ :I<Locate-a-string>"
msgstr ""
#. type: Plain text
#: ../top/top.1:1977
msgid "You will be prompted for the case-sensitive string to locate starting from the current window coordinates. There are no restrictions on search string content."
msgstr ""
#. type: Plain text
#: ../top/top.1:1981
msgid "Searches are not limited to values from a single field or column. All of the values displayed in a task row are allowed in a search string. You may include spaces, numbers, symbols and even forest view artwork."
msgstr ""
#. type: Plain text
#: ../top/top.1:1984
msgid "Keying E<lt>EnterE<gt> with no input will effectively disable the `&' key until a new search string is entered."
msgstr ""
#. type: TP
#: ../top/top.1:1985
#, no-wrap
msgid "B<&>\\ \\ :I<Locate-next>"
msgstr ""
#. type: Plain text
#: ../top/top.1:1989
msgid "Assuming a search string has been established, \\*(We will attempt to locate the next occurrence."
msgstr ""
#. type: Plain text
#: ../top/top.1:1996
msgid "When a match is found, the current window is repositioned vertically so the task row containing that string is first. The scroll coordinates message can provide confirmation of such vertical repositioning (\\*(Xc `C' \\*(CI). Horizontal scrolling, however, is never altered via searching."
msgstr ""
#. type: Plain text
#: ../top/top.1:1999
msgid "The availability of a matching string will be influenced by the following factors."
msgstr ""
#. type: TP
#: ../top/top.1:2000
#, no-wrap
msgid "a. Which fields are displayable from the total available,"
msgstr ""
#. type: Plain text
#: ../top/top.1:2003
msgid "\\*(Xt 3b. MANAGING Fields."
msgstr ""
#. type: TP
#: ../top/top.1:2003
#, no-wrap
msgid "b. Scrolling a window vertically and/or horizontally,"
msgstr ""
#. type: Plain text
#: ../top/top.1:2006
msgid "\\*(Xt 5c. SCROLLING a Window."
msgstr ""
#. type: TP
#: ../top/top.1:2006
#, no-wrap
msgid "c. The state of the command/command-line toggle,"
msgstr ""
#. type: Plain text
#: ../top/top.1:2009
msgid "\\*(Xc `c' \\*(CI."
msgstr ""
#. type: TP
#: ../top/top.1:2009
#, no-wrap
msgid "d. The stability of the chosen sort column,"
msgstr ""
#. type: Plain text
#: ../top/top.1:2012
msgid "for example PID is good but %CPU bad."
msgstr ""
#. type: Plain text
#: ../top/top.1:2018
msgid "If a search fails, restoring the \\*(CW home (unscrolled) position, scrolling horizontally, displaying command-lines or choosing a more stable sort field could yet produce a successful `&' search."
msgstr ""
#. type: Plain text
#: ../top/top.1:2027
msgid "\\*(NT Whenever a Search is active in a window, \\*(We will turn column highlighting \\*F to prevent false matches on internal non-display escape sequences. Such highlighting will be restored when a window's search string is empty. \\*(XC `x' \\*(CI for additional information on sort column highlighting."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:2029
#, no-wrap
msgid "5e. FILTERING in a Window"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:2035
msgid "You can use this `Other Filter' feature to establish selection criteria which will then determine which tasks are shown in the \\*(CW. Such filters can be made presistent if preserved in the rcfile via the 'W' \\*(CI."
msgstr ""
#. type: Plain text
#: ../top/top.1:2041
msgid "Establishing a filter requires: 1) a field name; 2) an operator; and 3) a selection value, as a minimum. This is the most complex of \\*(We's user input requirements so, when you make a mistake, command recall will be your friend. Remember the Up/Down \\*(KAs or their aliases when prompted for input."
msgstr ""
#. type: Plain text
#: ../top/top.1:2043
msgid "B<Filter Basics>"
msgstr ""
#. type: TP
#: ../top/top.1:2044
#, no-wrap
msgid "1. field names are case sensitive and spelled as in the header"
msgstr ""
#. type: TP
#: ../top/top.1:2046
#, no-wrap
msgid "2. selection values need not comprise the full displayed field"
msgstr ""
#. type: TP
#: ../top/top.1:2048
#, no-wrap
msgid "3. a selection is either case insensitive or sensitive to case"
msgstr ""
#. type: TP
#: ../top/top.1:2050
#, no-wrap
msgid "4. the default is inclusion, prepending `!' denotes exclusions"
msgstr ""
#. type: TP
#: ../top/top.1:2052
#, no-wrap
msgid "5. multiple selection criteria can be applied to a \\*(TW"
msgstr ""
#. type: TP
#: ../top/top.1:2054
#, no-wrap
msgid "6. inclusion and exclusion criteria can be used simultaneously"
msgstr ""
#. type: TP
#: ../top/top.1:2056
#, no-wrap
msgid "7. the 1 equality and 2 relational filters can be freely mixed"
msgstr ""
#. type: TP
#: ../top/top.1:2058
#, no-wrap
msgid "8. separate unique filters are maintained for each \\*(TW"
msgstr ""
#. type: Plain text
#: ../top/top.1:2066
msgid "If a field is not turned on or is not currently in view, then your selection criteria will not affect the display. Later, should a filtered field become visible, the selection criteria will then be applied."
msgstr ""
#. type: Plain text
#: ../top/top.1:2069
msgid "B<Keyboard Summary>"
msgstr ""
#. type: TP
#: ../top/top.1:2069
#, no-wrap
msgid "\\ \\ B<o>\\ \\ :I<Other-Filter> (lower case)"
msgstr ""
#. type: Plain text
#: ../top/top.1:2073
msgid "You will be prompted to establish a filter that B<ignores case> when matching."
msgstr ""
#. type: TP
#: ../top/top.1:2074
#, no-wrap
msgid "\\ \\ B<O>\\ \\ :I<Other-Filter> (upper case)"
msgstr ""
#. type: Plain text
#: ../top/top.1:2077
msgid "You will be prompted to establish a B<case sensitive> filter."
msgstr ""
#. type: TP
#: ../top/top.1:2078
#, no-wrap
msgid "\\ B<^O>\\ \\ :I<Show-Active-Filters> (Ctrl key + `o')"
msgstr ""
#. type: Plain text
#: ../top/top.1:2082
msgid "This can serve as a reminder of which filters are active in the \\*(CW. A summary will be shown on the message line until you press the E<lt>EnterE<gt> key."
msgstr ""
#. type: TP
#: ../top/top.1:2083
#, no-wrap
msgid "\\ \\ B<=>\\ \\ :I<Reset-Filtering> in current window"
msgstr ""
#. type: Plain text
#: ../top/top.1:2087
msgid "This clears all of your selection criteria in the \\*(CW. It also has additional impact so please \\*(Xt 4a. GLOBAL Commands."
msgstr ""
#. type: TP
#: ../top/top.1:2088
#, no-wrap
msgid "\\ \\ B<+>\\ \\ :I<Reset-Filtering> in all windows"
msgstr ""
#. type: Plain text
#: ../top/top.1:2093
msgid "This clears the selection criteria in all windows, assuming you are in \\*(AM. As with the `=' \\*(CI, it too has additional consequences so you might wish to \\*(Xt 5b. COMMANDS for Windows."
msgstr ""
#. type: Plain text
#: ../top/top.1:2096
msgid "B<Input Requirements>"
msgstr ""
#. type: Plain text
#: ../top/top.1:2102
msgid "When prompted for selection criteria, the data you provide must take one of two forms. There are 3 required pieces of information, with a 4th as optional. These examples use spaces for clarity but your input generally would not."
msgstr ""
#. type: Plain text
#: ../top/top.1:2107
#, no-wrap
msgid ""
" #1 B<#2> #3 ( required )\n"
" Field-Name ? include-if-value\n"
" B<!> Field-Name ? B<exclude>-if-value\n"
" #4 ( optional )\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2112
msgid "Items #1, #3 and #4 should be self-explanatory. Item B<#2> represents both a required I<delimiter> and the I<operator> which must be one of either equality (`=') or relation (`E<lt>' or `E<gt>')."
msgstr ""
#. type: Plain text
#: ../top/top.1:2121
msgid "The `=' equality operator requires only a partial match and that can reduce your `if-value' input requirements. The `E<gt>' or `E<lt>' relational operators always employ string comparisons, even with numeric fields. They are designed to work with a field's default I<justification> and with homogeneous data. When some field's numeric amounts have been subjected to I<scaling> while others have not, that data is no longer homogeneous."
msgstr ""
#. type: Plain text
#: ../top/top.1:2128
msgid "If you establish a relational filter and you B<have> changed the default Numeric or Character I<justification>, that filter is likely to fail. When a relational filter is applied to a memory field and you B<have not> changed the I<scaling>, it may produce misleading results. This happens, for example, because `100.0m' (MiB) would appear greater than `1.000g' (GiB) when compared as strings."
msgstr ""
#. type: Plain text
#: ../top/top.1:2132
msgid "If your filtered results appear suspect, simply altering justification or scaling may yet achieve the desired objective. See the `j', `J' and `e' \\*(CIs for additional information."
msgstr ""
#. type: Plain text
#: ../top/top.1:2135
msgid "B<Potential Problems>"
msgstr ""
#. type: Plain text
#: ../top/top.1:2139
msgid "These B<GROUP> filters could produce the exact same results or the second one might not display anything at all, just a blank \\*(TW."
msgstr ""
#. type: Plain text
#: ../top/top.1:2142
#, no-wrap
msgid ""
" GROUP=root ( only the same results when )\n"
" GROUP=ROOT ( invoked via lower case `o' )\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2147
msgid "Either of these B<RES> filters might yield inconsistent and/or misleading results, depending on the current memory scaling factor. Or both filters could produce the exact same results."
msgstr ""
#. type: Plain text
#: ../top/top.1:2150
#, no-wrap
msgid ""
" RESE<gt>9999 ( only the same results when )\n"
" !RESE<lt>10000 ( memory scaling is at `KiB' )\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2156
msgid "This B<nMin> filter illustrates a problem unique to scalable fields. This particular field can display a maximum of 4 digits, beyond which values are automatically scaled to KiB or above. So while amounts greater than 9999 exist, they will appear as 2.6m, 197k, etc."
msgstr ""
#. type: Plain text
#: ../top/top.1:2158
#, no-wrap
msgid " nMinE<gt>9999 ( always a blank \\*(TW )\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2162
msgid "B<Potential Solutions>"
msgstr ""
#. type: Plain text
#: ../top/top.1:2169
msgid "These examples illustrate how Other Filtering can be creatively applied to achieve almost any desired result. Single quotes are sometimes shown to delimit the spaces which are part of a filter or to represent a request for status (^O) accurately. But if you used them with if-values in real life, no matches would be found."
msgstr ""
#. type: Plain text
#: ../top/top.1:2174
msgid "Assuming field B<nTH> is displayed, the first filter will result in only multi-threaded processes being shown. It also reminds us that a trailing space is part of every displayed field. The second filter achieves the exact same results with less typing."
msgstr ""
#. type: Plain text
#: ../top/top.1:2177
#, no-wrap
msgid ""
" !nTH=` 1 ' ( ' for clarity only )\n"
" nTHE<gt>1 ( same with less i/p )\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2181
msgid "With Forest View mode active and the B<COMMAND> column in view, this filter effectively collapses child processes so that just 3 levels are shown."
msgstr ""
#. type: Plain text
#: ../top/top.1:2183
#, no-wrap
msgid " !COMMAND=` `- ' ( ' for clarity only )\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2191
msgid "The final two filters appear as in response to the status request key (^O). In reality, each filter would have required separate input. The B<PR> example shows the two concurrent filters necessary to display tasks with priorities of 20 or more, since some might be negative. Then by exploiting trailing spaces, the B<nMin> series of filters could achieve the failed `9999' objective discussed above."
msgstr ""
#. type: Plain text
#: ../top/top.1:2194
#, no-wrap
msgid ""
" `PRE<gt>20' + `!PR=-' ( 2 for right result )\n"
" `!nMin=0 ' + `!nMin=1 ' + `!nMin=2 ' + `!nMin=3 ' ...\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2203
msgid "\\*(NT Whenever Other Filtering is active in a window, \\*(We will turn column highlighting \\*F to prevent false matches on internal non-display escape sequences. Such highlighting will be restored when a window is no longer subject to filtering. \\*(XC `x' \\*(CI for additional information on sort column highlighting."
msgstr ""
#. ----------------------------------------------------------------------
#. type: SH
#: ../top/top.1:2206
#, fuzzy, no-wrap
#| msgid "FILES"
msgid "6. FILES"
msgstr "FILER"
#. ----------------------------------------------------------------------
#. type: SS
#: ../top/top.1:2208
#, no-wrap
msgid "6a. PERSONAL Configuration File"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:2211
msgid "This file is created or updated via the 'W' \\*(CI."
msgstr ""
#. type: Plain text
#: ../top/top.1:2214
msgid "The legacy version is written as `$HOME/.your-name-4-\\*(We' + `rc' with a leading period."
msgstr ""
#. type: Plain text
#: ../top/top.1:2219
msgid "A newly created \\*(CF is written as procps/your-name-4-\\*(We' + `rc' without a leading period. The procps directory will be subordinate to either $XDG_CONFIG_HOME when set as an absolute path or the $HOME/.config directory."
msgstr ""
#. type: Plain text
#: ../top/top.1:2221
msgid "While not intended to be edited manually, here is the general layout:"
msgstr ""
#. type: Plain text
#: ../top/top.1:2231
#, no-wrap
msgid ""
" global # line 1: the program name/alias notation\n"
" \" # line 2: id,altscr,irixps,delay,curwin\n"
" per ea # line a: winname,fieldscur\n"
" window # line b: winflags,sortindx,maxtasks,etc\n"
" \" # line c: summclr,msgsclr,headclr,taskclr\n"
" global # line 15: additional miscellaneous settings\n"
" \" # any remaining lines are devoted to optional\n"
" \" # active 'other filters' discussed in section 5e above\n"
" \" # plus 'inspect' entries discussed in section 6b below\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2235
msgid "If a valid absolute path to the rcfile cannot be established, customizations made to a running \\*(We will be impossible to preserve."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:2237
#, no-wrap
msgid "6b. ADDING INSPECT Entries"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:2244
msgid "To exploit the `Y' \\*(CI, you must add entries at theB< end> of the \\*(We personal \\*(CF. Such entries simply reflect a file to be read or command/pipeline to be executed whose results will then be displayed in a separate scrollable, searchable window."
msgstr ""
#. type: Plain text
#: ../top/top.1:2247
msgid "If you don't know the location or name of your \\*(We rcfile, use the `W' \\*(CI to rewrite it and note those details."
msgstr ""
#. type: Plain text
#: ../top/top.1:2253
msgid "Inspect entries can be added with a redirected echo or by editing the \\*(CF. Redirecting an echo risks overwriting the rcfile should it replace (E<gt>) rather than append (E<gt>E<gt>) to that file. Conversely, when using an editor care must be taken not to corrupt existing lines, some of which will contain unprintable data or unusual characters."
msgstr ""
#. type: Plain text
#: ../top/top.1:2258
msgid "Those Inspect entries beginning with a `#' character are ignored, regardless of content. Otherwise they consist of the following 3 elements, each of whichI< must> be separated by a tab character (thus 2 `\\et' total):"
msgstr ""
#. type: Plain text
#: ../top/top.1:2263
#, no-wrap
msgid ""
" .type: literal `file' or `pipe'\n"
" .name: selection shown on the Inspect screen\n"
" .fmts: string representing a path or command\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2270
msgid "The two types of Inspect entries areI< not> interchangeable. Those designated `B<file>' will be accessed using fopen and must reference a single file in the `.fmts' element. Entries specifying `B<pipe>' will employ popen, their `.fmts' element could contain many pipelined commands and, none can be interactive."
msgstr ""
#. type: Plain text
#: ../top/top.1:2274
msgid "If the file or pipeline represented in your `.fmts' deals with the specific PID input or accepted when prompted, then the format string must also contain the `B<%d>' specifier, as these examples illustrate."
msgstr ""
#. type: Plain text
#: ../top/top.1:2278
#, no-wrap
msgid ""
" .fmts= /proc/I<%d>/numa_maps\n"
" .fmts= lsof -P -pI< %d>\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2283
msgid "For `B<pipe>' type entries only, you may also wish to redirect stderr to stdout for a more comprehensive result. Thus the format string becomes:"
msgstr ""
#. type: Plain text
#: ../top/top.1:2286
#, no-wrap
msgid " .fmts= pmap -x %dI< 2E<gt>&1>\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2293
msgid "Here are examples of both types of Inspect entries as they might appear in the rcfile. The first entry will be ignored due to the initial `#' character. For clarity, the pseudo tab depictions (^I) are surrounded by an extra space but the actual tabs would not be."
msgstr ""
#. type: Plain text
#: ../top/top.1:2299
#, no-wrap
msgid ""
" # pipe ^I Sockets ^I lsof -n -P -i 2E<gt>&1\n"
" pipe ^I Open Files ^I lsof -P -p %d 2E<gt>&1\n"
" file ^I NUMA Info ^I /proc/%d/numa_maps\n"
" pipe ^I Log ^I tail -n100 /var/log/syslog | sort -Mr\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2306
msgid "Except for the commented entry above, these next examples show what could be echoed to achieve similar results, assuming the rcfile name was `.toprc'. However, due to the embedded tab characters, each of these lines should be preceded by `B</bin/echo -e>', not just a simple an `echo', to enable backslash interpretation regardless of which shell you use."
msgstr ""
#. type: Plain text
#: ../top/top.1:2311
#, no-wrap
msgid ""
" \"pipe\\etOpen Files\\etlsof -P -p %d 2E<gt>&1\" E<gt>E<gt> ~/.toprc\n"
" \"file\\etNUMA Info\\et/proc/%d/numa_maps\" E<gt>E<gt> ~/.toprc\n"
" \"pipe\\etLog\\ettail -n200 /var/log/syslog | sort -Mr\" E<gt>E<gt> ~/.toprc\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2320
msgid "If any inspect entry you create produces output with unprintable characters they will be displayed in either the ^C notation or hexadecimal E<lt>FFE<gt> form, depending on their value. This applies to tab characters as well, which will show as `^I'. If you want a truer representation, any embedded tabs should be expanded. The following example takes what could have been a `file' entry but employs a `pipe' instead so as to expand the embedded tabs."
msgstr ""
#. type: Plain text
#: ../top/top.1:2326
#, no-wrap
msgid ""
" # next would have contained `\\et' ...\n"
" # file ^I E<lt>your_nameE<gt> ^I /proc/%d/status\n"
" # but this will eliminate embedded `\\et' ...\n"
" pipe ^I E<lt>your_nameE<gt> ^I cat /proc/%d/status | expand -\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2332
msgid "\\*(NT Some programs might rely on I<SIGINT> to end. Therefore, if a `B<pipe>' such as the following is established, one must use Ctrl-C to terminate it in order to review the results. This is the single occasion where a `^C' will not also terminate \\*(We."
msgstr ""
#. type: Plain text
#: ../top/top.1:2335
#, no-wrap
msgid " pipe ^I Trace ^I /usr/bin/strace -p %d 2E<gt>&1\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2341
msgid "Lastly, while `B<pipe>' type entries have been discussed in terms of pipelines and commands, there is nothing to prevent you from including I< shell scripts> as well. Perhaps even newly created scripts designed specifically for the `Y' \\*(CI."
msgstr ""
#. type: Plain text
#: ../top/top.1:2347
msgid "For example, as the number of your Inspect entries grows over time, the `Options:' row will be truncated when screen width is exceeded. That does not affect operation other than to make some selections invisible. However, if some choices are lost to truncation but you want to see more options, there is an easy solution hinted at below."
msgstr ""
#. type: Plain text
#: ../top/top.1:2352
#, no-wrap
msgid ""
" Inspection Pause at pid ...\n"
" Use: left/right then E<lt>EnterE<gt> ...\n"
" Options: help 1 2 3 4 5 6 7 8 9 10 11 ...\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2358
msgid "The entries in the \\*(We rcfile would have a number for the `.name' element and the `help' entry would identify a shell script you've written explaining what those numbered selections actually mean. In that way, many more choices can be made visible."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:2360
#, no-wrap
msgid "6c. SYSTEM Configuration File"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:2365
msgid "This \\*(CF represents defaults for users who have not saved their own \\*(CF. The format mirrors exactly the personal \\*(CF and can also include `inspect' entries as explained above."
msgstr ""
#. type: Plain text
#: ../top/top.1:2367
msgid "Creating it is a simple process."
msgstr ""
#. type: Plain text
#: ../top/top.1:2370
msgid "1. Configure \\*(We appropriately for your installation and preserve that configuration with the `W' \\*(CI."
msgstr ""
#. type: Plain text
#: ../top/top.1:2372
msgid "2. Add and test any desired `inspect' entries."
msgstr ""
#. type: Plain text
#: ../top/top.1:2374
msgid "3. Copy that \\*(CF to the I</etc/> directory as `B<topdefaultrc>'."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:2376
#, no-wrap
msgid "6d. SYSTEM Restrictions File"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:2380
msgid "The presence of this file will influence which version of the help screen is shown to an ordinary user."
msgstr ""
#. type: Plain text
#: ../top/top.1:2384
msgid "More importantly, it will limit what ordinary users are allowed to do when \\*(We is running. They will not be able to issue the following commands."
msgstr ""
#. type: Plain text
#: ../top/top.1:2388
#, no-wrap
msgid ""
" k Kill a task\n"
" r Renice a task\n"
" d or s Change delay/sleep interval\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2393
msgid "This \\*(CF is not created by \\*(We. Rather, it is created manually and placed it in the I</etc/> directory as `B<toprc>'."
msgstr ""
#. type: Plain text
#: ../top/top.1:2395
msgid "It should have exactly two lines, as shown in this example:"
msgstr ""
#. type: Plain text
#: ../top/top.1:2398
#, no-wrap
msgid ""
" s # line 1: secure mode switch\n"
" 5.0 # line 2: delay interval in seconds\n"
msgstr ""
#. ......................................................................
#. ----------------------------------------------------------------------
#. type: SH
#: ../top/top.1:2402
#, no-wrap
msgid "7. STUPID TRICKS Sampler"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:2407
msgid "Many of these tricks work best when you give \\*(We a scheduling boost. So plan on starting him with a nice value of -10, assuming you've got the authority."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:2409
#, no-wrap
msgid "7a. Kernel Magic"
msgstr ""
#. ----------------------------------------------------------------------
#. sorry, just can't help it -- don't ya love the sound of this?
#. ( apparently AM static was a potential concern )
#. type: Plain text
#: ../top/top.1:2414
msgid "For these stupid tricks, \\*(We needs \\*(FM."
msgstr ""
#. type: Plain text
#: ../top/top.1:2421
msgid "The user interface, through prompts and help, intentionally implies that the delay interval is limited to tenths of a second. However, you're free to set any desired delay. If you want to see Linux at his scheduling best, try a delay of .09 seconds or less."
msgstr ""
#. type: Plain text
#: ../top/top.1:2424
msgid "For this experiment, under x-windows open an xterm and maximize it. Then do the following:"
msgstr ""
#. type: Plain text
#: ../top/top.1:2433
#, no-wrap
msgid ""
" . provide a scheduling boost and tiny delay via:\n"
" nice -n -10 \\*(We -d.09\n"
" . keep sorted column highlighting \\*F so as to\n"
" minimize path length\n"
" . turn \\*O reverse row highlighting for emphasis\n"
" . try various sort columns (TIME/MEM work well),\n"
" and normal or reverse sorts to bring the most\n"
" active processes into view\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2437
msgid "What you'll see is a very busy Linux doing what he's always done for you, but there was no program available to illustrate this."
msgstr ""
#. type: Plain text
#: ../top/top.1:2443
msgid "Under an xterm using `white-on-black' colors, on \\*(We's Color Mapping screen set the task color to black and be sure that task highlighting is set to bold, not reverse. Then set the delay interval to around .3 seconds."
msgstr ""
#. type: Plain text
#: ../top/top.1:2446
msgid "After bringing the most active processes into view, what you'll see are the ghostly images of just the currently running tasks."
msgstr ""
#. type: Plain text
#: ../top/top.1:2452
msgid "Delete the existing rcfile, or create a new symlink. Start this new version then type `T' (a secret key, \\*(Xt 4c. Task Area Commands, SORTING) followed by `W' and `q'. Finally, restart the program with -d0 (zero delay)."
msgstr ""
#. type: Plain text
#: ../top/top.1:2457
msgid "Your display will be refreshed at three times the rate of the former \\*(We, a 300% speed advantage. As \\*(We climbs the TIME ladder, be as patient as you can while speculating on whether or not \\*(We will ever reach the \\*(We."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:2459
#, no-wrap
msgid "7b. Bouncing Windows"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:2462
msgid "For these stupid tricks, \\*(We needs \\*(AM."
msgstr ""
#. type: Plain text
#: ../top/top.1:2468
msgid "With 3 or 4 \\*(TDs visible, pick any window other than the last and turn idle processes \\*F using the `i' \\*(CT. Depending on where you applied `i', sometimes several \\*(TDs are bouncing and sometimes it's like an accordion, as \\*(We tries his best to allocate space."
msgstr ""
#. type: Plain text
#: ../top/top.1:2474
msgid "Set each window's summary lines differently: one with no memory (`m'); another with no states (`t'); maybe one with nothing at all, just the message line. Then hold down `a' or `w' and watch a variation on bouncing windows \\*(Em hopping windows."
msgstr ""
#. type: Plain text
#: ../top/top.1:2479
msgid "Display all 4 windows and for each, in turn, set idle processes to \\*F using the `i' \\*(CT. You've just entered the \"extreme bounce\" zone."
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:2481
#, no-wrap
msgid "7c. The Big Bird Window"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:2484
msgid "This stupid trick also requires \\*(AM."
msgstr ""
#. type: Plain text
#: ../top/top.1:2489
msgid "Display all 4 windows and make sure that 1:Def is the \\*(CW. Then, keep increasing window size with the `n' \\*(CI until all the other \\*(TDs are \"pushed out of the nest\"."
msgstr ""
#. type: Plain text
#: ../top/top.1:2493
msgid "When they've all been displaced, toggle between all visible/invisible windows using the `_' \\*(CT. Then ponder this:"
msgstr ""
#. type: Plain text
#: ../top/top.1:2495
#, no-wrap
msgid " is \\*(We fibbing or telling honestly your imposed truth?\n"
msgstr ""
#. ......................................................................
#. type: SS
#: ../top/top.1:2497
#, no-wrap
msgid "7d. The Ol' Switcheroo"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:2501
msgid "This stupid trick works best without \\*(AM, since justification is active on a per window basis."
msgstr ""
#. type: Plain text
#: ../top/top.1:2506
msgid "Start \\*(We and make COMMAND the last (rightmost) column displayed. If necessary, use the `c' \\*(CT to display command lines and ensure that forest view mode is active with the `V' \\*(CT."
msgstr ""
#. type: Plain text
#: ../top/top.1:2510
msgid "Then use the up/down arrow keys to position the display so that some truncated command lines are shown (`+' in last position). You may have to resize your xterm to produce truncation."
msgstr ""
#. type: Plain text
#: ../top/top.1:2512
msgid "Lastly, use the `j' \\*(CT to make the COMMAND column right justified."
msgstr ""
#. type: Plain text
#: ../top/top.1:2516
msgid "Now use the right arrow key to reach the COMMAND column. Continuing with the right arrow key, watch closely the direction of travel for the command lines being shown."
msgstr ""
#. type: Plain text
#: ../top/top.1:2519
#, no-wrap
msgid " some lines travel left, while others travel right\n"
msgstr ""
#. type: Plain text
#: ../top/top.1:2521
#, no-wrap
msgid " eventually all lines will Switcheroo, and move right\n"
msgstr ""
#. ----------------------------------------------------------------------
#. type: SH
#: ../top/top.1:2523
#, fuzzy, no-wrap
#| msgid "BUGS"
msgid "8. BUGS"
msgstr "FEL"
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:2528
msgid "Please send bug reports to E<.UR procps@freelists.org> E<.UE .>"
msgstr ""
"Skicka felrapporter till E<.UR procps@freelists.org> E<.UE .>\n"
"Skicka synpunkter på översättningen till E<.UR tp-sv@listor.tp-sv.se> E<.UE .>"
#. ----------------------------------------------------------------------
#. type: SH
#: ../top/top.1:2530
#, no-wrap
msgid "9. SEE Also"
msgstr ""
#. ----------------------------------------------------------------------
#. type: Plain text
#: ../top/top.1:2538
#, fuzzy
#| msgid "B<free>(1), B<ps>(1), B<top>(1), B<uptime>(1), B<utmp>(5), B<who>(1)"
msgid "B<free>(1), B<ps>(1), B<uptime>(1), B<atop>(1), B<slabtop>(1), B<vmstat>(8), B<w>(1)"
msgstr "B<free>(1), B<ps>(1), B<top>(1), B<uptime>(1), B<utmp>(5), B<who>(1)"