- Don't else after return or fail_exit().
- Prefer == over != (negated logic is more complex to think about it).
- Reduce nesting when reasonable.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
There's no reason to report all errors. Bail out at the first one,
which is simpler.
Suggested-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Some errors were being reported in stderr, but then they weren't really
being treated as errors.
If mkdir(2) for EEXIST, it's possible that the sysadmin pre-created the
user dir; don't fail. However, let's keep a log line, for having some
notice that it happened.
Also, run chmod(2) if mkdir(2) failed for EEXIST (so transform the
'else if' into an 'if').
Cc: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Use of these macros, apart from the benefits mentioned in the commit
that adds the macros, has some other good side effects:
- Consistency in getting the size of the object from sizeof(type),
instead of a mix of sizeof(type) sometimes and sizeof(*p) other
times.
- More readable code: no casts, and no sizeof(), so also shorter lines
that we don't need to cut.
- Consistency in using array allocation calls for allocations of arrays
of objects, even when the object size is 1.
Cc: Valentin V. Bartenev <vbartenev@gmail.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
- Every non-const pointer converts automatically to void *.
- Every pointer converts automatically to void *.
- void * converts to any other pointer.
- const void * converts to any other const pointer.
- Integer variables convert to each other.
I changed the declaration of a few variables in order to allow removing
a cast.
However, I didn't attempt to edit casts inside comparisons, since they
are very delicate. I also kept casts in variadic functions, since they
are necessary, and in allocation functions, because I have other plans
for them.
I also changed a few casts to int that are better as ptrdiff_t.
This change has triggered some warnings about const correctness issues,
which have also been fixed in this patch (see for example src/login.c).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
In variadic functions we still do the cast. In POSIX, it's not
necessary, since NULL is required to be of type 'void *', and 'void *'
is guaranteed to have the same alignment and representation as 'char *'.
However, since ISO C still doesn't mandate that, and moreover they're
doing dubious stuff by adding nullptr, let's be on the cautious side.
Also, C++ requires that NULL is _not_ 'void *', but either plain 0 or
some magic stuff.
Signed-off-by: Alejandro Colomar <alx@kernel.org>
free(3) accepts NULL, since the oldest ISO C. I guess the
paranoid code was taking care of prehistoric implementations of
free(3). I've never known of an implementation that doesn't
conform to this, so let's simplify this.
Remove xfree(3), which was effectively an equivalent of free(3).
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Closes#331
1. drop 'has_any_range' nss method as it is not useful
2. do not try to create a subid range in newusers when using nss for
subids, since that's not possible.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
(cherry picked from commit 88a434adbdcf4a8640793fd58bcd2ba77598349d)
Closes#325
Add a new subid_init() function which can be used to specify the
stream on which error messages should be printed. (If you want to
get fancy you can redirect that to memory :) If subid_init() is
not called, use stderr. If NULL is passed, then /dev/null will
be used.
This patch also fixes up the 'Prog', which previously had to be
defined by any program linking against libsubid. Now, by default
in libsubid it will show (subid). Once subid_init() is called,
it will use the first variable passed to subid_init().
Signed-off-by: Serge Hallyn <serge@hallyn.com>
This option can be used to set a separate mode for useradd(8) and
newusers(8) to create the home directories with.
If this option is not set, the current behavior of using UMASK
or the default umask is preserved.
There are many distributions that set UMASK to 077 by default just
to create home directories not readable by others and use things like
/etc/profile, bashrc or sudo configuration files to set a less
restrictive
umask. This has always resulted in bug reports because it is hard
to follow as users tend to change files like bashrc and are not about
setting the umask to counteract the umask set in /etc/login.defs.
A recent change in sudo has also resulted in many bug reports about
this. sudo now tries to respect the umask set by pam modules and on
systems where pam does not set a umask, the login.defs UMASK value is
used.
This option can be used to set a separate mode for useradd(8) and
newusers(8) to create the home directories with.
If this option is not set, the current behavior of using UMASK
or the default umask is preserved.
There are many distributions that set UMASK to 077 by default just
to create home directories not readable by others and use things like
/etc/profile, bashrc or sudo configuration files to set a less
restrictive
umask. This has always resulted in bug reports because it is hard
to follow as users tend to change files like bashrc and are not about
setting the umask to counteract the umask set in /etc/login.defs.
A recent change in sudo has also resulted in many bug reports about
this. sudo now tries to respect the umask set by pam modules and on
systems where pam does not set a umask, the login.defs UMASK value is
used.
Some distributions, notably Fedora, have the following order of nsswitch
modules by default:
passwd: sss files
group: sss files
The advantage of serving local users through SSSD is that the nss_sss
module has a fast mmapped-cache that speeds up NSS lookups compared to
accessing the disk an opening the files on each NSS request.
Traditionally, this has been done with the help of nscd, but using nscd
in parallel with sssd is cumbersome, as both SSSD and nscd use their own
independent caching, so using nscd in setups where sssd is also serving
users from some remote domain (LDAP, AD, ...) can result in a bit of
unpredictability.
More details about why Fedora chose to use sss before files can be found
on e.g.:
https://fedoraproject.org//wiki/Changes/SSSDCacheForLocalUsers
or:
https://docs.pagure.org/SSSD.sssd/design_pages/files_provider.html
Now, even though sssd watches the passwd and group files with the help
of inotify, there can still be a small window where someone requests a
user or a group, finds that it doesn't exist, adds the entry and checks
again. Without some support in shadow-utils that would explicitly drop
the sssd caches, the inotify watch can fire a little late, so a
combination of commands like this:
getent passwd user || useradd user; getent passwd user
can result in the second getent passwd not finding the newly added user
as the racy behaviour might still return the cached negative hit from
the first getent passwd.
This patch more or less copies the already existing support that
shadow-utils had for dropping nscd caches, except using the "sss_cache"
tool that sssd ships.
The third field in the /etc/shadow file (sp_lstchg) contains the date of
the last password change expressed as the number of days since Jan 1, 1970.
As this is a relative time, creating a user today will result in:
username:17238:0:99999:7:::
whilst creating the same user tomorrow will result in:
username:17239:0:99999:7:::
This has an impact for the Reproducible Builds[0] project where we aim to
be independent of as many elements the build environment as possible,
including the current date.
This patch changes the behaviour to use the SOURCE_DATE_EPOCH[1]
environment variable (instead of Jan 1, 1970) if valid.
[0] https://reproducible-builds.org/
[1] https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Chris Lamb <lamby@debian.org>
passwd, shadow, group, gshadow etc. can be managed via nss -
e.g. system default accounts can be specified using nss_altfiles,
rather than in /etc/. Thus despite having default accounts, these
files can be missing on disk and thus should be opened with O_CREATE
whenever they are attempted to be opened in O_RDWR modes.
* configure.in: Add configure options --enable-subordinate-ids /
--disable-subordinate-ids. Enabled by default.
* lib/prototypes.h: Include <config.h> before using its macros.
* lib/commonio.h, lib/commonio.c: Define commonio_append only when
ENABLE_SUBIDS is defined.
* lib/prototypes.h, libmisc/find_new_sub_gids.c,
libmisc/find_new_sub_uids.c: Likewise.
* lib/subordinateio.h, lib/subordinateio.c: Likewise.
* libmisc/user_busy.c: Only check if subordinate IDs are in use if
ENABLE_SUBIDS is defined.
* src/Makefile.am: Create newgidmap and newuidmap only if
ENABLE_SUBIDS is defined.
* src/newusers.c: Check for ENABLE_SUBIDS to enable support for
subordinate IDs.
* src/useradd.c: Likewise.
* src/userdel.c: Likewise.
* src/usermod.c: Likewise.
* man/Makefile.am: Install man1/newgidmap.1, man1/newuidmap.1,
man5/subgid.5, and man5/subuid.5 only if ENABLE_SUBIDS is defined.
* man/fr/Makefile.am: Install man1/newgidmap.1, man1/newuidmap.1,
man5/subgid.5, and man5/subuid.5 (not translated yet).
* man/generate_mans.mak: Add xsltproc conditionals
subids/no_subids.
* man/login.defs.d/SUB_GID_COUNT.xml: Add dependency on subids
condition.
* man/login.defs.d/SUB_UID_COUNT.xml: Likewise.
* man/usermod.8.xml: Document options for subordinate IDs and
reference subgid(5) / subuid(5) depending on the subids condition.
* Changelog: Update documentation of 2013-07-28 mancha entry.
* lib/prototypes.h, lib/encrypt.c: Update splint marker,
pw_encrypt can return NULL.
* lib/encrypt.c: Fix outdated statement on GNU crypt.
* src/chgpasswd.c: Improve diagnostic to user when pw_encrypt
fails and use fail_exit() instead of exit().
* src/chpasswd.c: Likewise.
* src/newusers.c: Likewise.
* src/passwd.c: Likewise when new password is encrypted.
* src/newgrp.c: Improve diagnostic to user and syslog when
pw_encrypt fails. Do not apply 1s penalty as this is not an
invalid password issue.
* src/passwd.c: Likewise when password is checked.
a salt that violates specs. On Linux, crypt() also fails with
DES/MD5 salts in FIPS140 mode. Rather than exit() on NULL returns
we send them back to the caller for appropriate handling.
src/chsh.c, src/groupadd.c, src/groupdel.c, src/groupmems.c,
src/groupmod.c, src/newusers.c, src/useradd.c, src/userdel.c,
src/usermod.c: Provide the PAM error
message instead of our own, and log error to syslog.
* src/groupmems.c: Exit with exit rather than fail_exit in usage().
* src/newusers.c: Check the number of arguments.
* src/newusers.c: Do not create the home directory when it is not
changed.
* src/useradd.c: Set the group password to "!" rather "x" if there
are no gshadow file.
instead of 'x'. Only when it is confirmed that a shadow entry is
(will be) added, set the passwd's password to 'x'.
* src/newusers.c: An invalid line is an error. A failure needs to
be reported.