INTERACTIVE Systems Corporation Unix is no longer sold, and Sun
said (long ago) that it would drop support for it on 2006-07-23.
So this macro has been obsolete for more than a decade.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
'mode_t' is defined by POSIX.1-2001 in <sys/types.h>.
It's unlikely to be missing.
See mode_t(3).
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
'pid_t' is defined by POSIX.1-2001 in <sys/types.h>.
It's unlikely to be missing.
See pid_t(3).
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
'off_t' is defined by POSIX.1-2001 in <sys/types.h>.
It's unlikely to be missing.
See off_t(3).
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
'uid_t' is defined by POSIX.1-2001 in <sys/types.h>.
It's unlikely to be missing.
See uid_t(3).
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The macro HAVE_RUSEROK is not being used anywhere.
As the Linux manual page says, ruserok(3) is present on the BDSs, Solaris, and many other systems. This function appeared in 4.2BSD. So we probably can rely on its existence.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The macro HAVE_GETADDRINFO is not being used anywhere.
BTW, the function is defined by POSIX.1-2001 and RFC 2553, so it's likely that it is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The macro HAVE_SIGACTION is not being used anywhere.
BTW, the function is defined by SVr4 and POSIX.1-2001, so it's likely that it is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The macro HAVE_GETTIMEOFDAY is not being used anywhere.
BTW, the function is defined by SVr4, 4.3BSD, and POSIX.1-2001, so
it's likely that it is always available.
POSIX.1-2008 marks it as obsolete, but only because
clock_gettime(2) provides more precission. Since gettimeofday(3)
is in use by many big projects, and it has no obvious dangers,
it's likely that it will continue to exist even if it's outside of
the POSIX standard.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The macro HAVE_GETHOSTNAME is not being used anywhere.
BTW, the function is defined by SVr4, 4.4BSD, and POSIX.1-2001, so
it's likely that it is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
The only place where the check was used was removed in 4e1afcd66.
BTW, it was unnecessary, since strchr(3) is defined by:
POSIX.1-2001, C89, SVr4, and 4.3BSD. Enough to rely on it.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
GNU autoconf documentation marks this macro as obsolescent, as
current systems are compatible with POSIX.
Simplify code to unconditionally include <sys/wait.h>, and don't
redefine WIFEXITSTATUS() and WIFEXITED(), since they are mandated
by POSIX.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
POSIX.1-2001 defines 'struct dirent' in <dirent.h>. It replaces
the old 'struct direct' found in BSDs. All of the systems that I
checked (including FreeBSD, NetBSD, and OpenBSD), now provide
<dirent.h> with 'struct dirent', as mandated by POSIX.
Since autoconf first checks <dirent.h> and only if it's missing it
checks other header files, it's clear that it will always find
<dirent.h>, so let's simplify.
GNU autoconf documentation declares this macro as obsolescent, and
acknowledges that all current systems with directory libraries
have <dirent.h>:
<https://www.gnu.org/software/autoconf/manual/autoconf-2.70/html_node/Particular-Headers.html>
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
Compilers are allowed to and do optimize memset(3) calls away for
pointers not accessed in the future. Since the memzero wrappers purpose
is exactly to unconditionally override memory (e.g. for stored
passwords) do not implement via regular memset(3), but via either
memset_s(3), explicit_bzero(3) or a hand written implementation using
volatile pointers.
See https://wiki.sei.cmu.edu/confluence/display/c/MSC06-C.+Beware+of+compiler+optimizations
We're in 2021. C89 is everywhere; in fact, there are many other
assumptions in the code that wouldn't probably hold on
pre-standard C environments. Let's simplify and assume that C89
is available.
The specific assumptions are that:
- <string.h>, and <stdlib.h> are available
- strchr(3), strrchr(3), and strtok(3) are available
- isalpha(3), isspace(3), isdigit(3), and isupper(3) are available
I think we can safely assume we have all of those.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
memset(3) has been in standard C since C89. It is also in
POSIX.1-2001, in SVr4, and in 4.3BSD (see memset(3) and memset(3p)).
We can assume that this function is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
memcpy(3) has been in standard C since C89. It is also in
POSIX.1-2001, in SVr4, and in 4.3BSD (see memcpy(3) and memcpy(3p)).
We can assume that this function is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
getgroups(2) has been in POSIX since POSIX.1-2001. It is also in
in SVr4 and in 4.3BSD (see getgroups(2) and getgroups(3p)).
We can assume that this function is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
strftime(3) has been in standard C since C89. It is also in
POSIX.1-2001, and in SVr4 (see strftime(3) and strftime(3p)).
We can assume that this function is always available.
Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com>
We were overriding this when --enable-shared was passed. We can actually
just dump the conditional logic as libtool will do the right thing for
us here anyway.
Without this patch, libsubid is installed as .0.
Signed-off-by: Sam James <sam@gentoo.org>
Rename libsubid symbols to all be prefixed with subid_.
Don't export anything but the subid_*.
Closes#443
Signed-off-by: Serge Hallyn <serge@hallyn.com>
libsubid's Makefile.am was always setting enable-shared in its LDFLAGS.
Do that only if not building static.
Closes#387
Signed-off-by: Serge Hallyn <shallyn@cisco.com>
The functions crypt(3), crypt_gensalt(3), and their
feature test macros may be defined in there.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
In a previous commit we introduced /dev/urandom as a source to obtain
random bytes from. This may not be available on all systems, or when
operating inside of a chroot.
Almost all systems provide functions to obtain random bytes from
secure system ressources. Thus we should prefer to use these, and
fall back to /dev/urandom, if there is no such function present, as
a last resort.
Signed-off-by: Björn Esser <besser82@fedoraproject.org>
Following alexey-tikhonov's suggestion.
Since we've dropped the 'owner' field in the data returned for
get_subid_ranges, we can just return a single allocated array of
simple structs. This means we can return a ** instead of ***, and
we can get rid of the subid_free_ranges() helper, since the caller
can just free() the returned data.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Closes#154
When starting any operation to do with subuid delegation, check
nsswitch for a module to use. If none is specified, then use
the traditional /etc/subuid and /etc/subgid files.
Currently only one module is supported, and there is no fallback
to the files on errors. Several possibilities could be considered:
1. in case of connection error, fall back to files
2. in case of unknown user, also fall back to files
etc...
When non-files nss module is used, functions to edit the range
are not supported. It may make sense to support it, but it also
may make sense to require another tool to be used.
libsubordinateio also uses the nss_ helpers. This is how for instance
lxc could easily be converted to supporting nsswitch.
Add a set of test cases, including a dummy libsubid_zzz module. This
hardcodes values such that:
'ubuntu' gets 200000 - 300000
'user1' gets 100000 - 165536
'error' emulates an nss module error
'unknown' emulates a user unknown to the nss module
'conn' emulates a connection error ot the nss module
Changes to libsubid:
Change the list_owner_ranges api: return a count instead of making the array
null terminated.
This is a breaking change, so bump the libsubid abi major number.
Rename free_subuid_range and free_subgid_range to ungrant_subuid_range,
because otherwise it's confusing with free_subid_ranges which frees
memory.
Run libsubid tests in jenkins
Switch argument order in find_subid_owners
Move the db locking into subordinateio.c
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Issue #297 reported seeing
*** Warning: Linking the shared library libsubid.la against the
*** static library ../libmisc/libmisc.a is not portable!
which commit b5fb1b38ee was supposed
to fix. But a few commits later it's back. So try to fix it
in the way the bug reporter suggested. This broke builds some
other ways, namely a few missing library specifications, so add
those.
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Closes#154
Currently this has three functions: one which returns the
list of subuid ranges for a user, one returning the subgids,
and one which frees the ranges lists.
I might be mistaken about what -disable-man means; some of
the code suggests it means just don't re-generate them, but
not totally ignore them. But that doesn't seem to really work,
so let's just ignore man/ when -disable-man.
Remove --disable-shared. I'm not sure why it was there, but it stems
from long, long ago, and I suspect it comes from some ancient
toolchain bug.
Create a tests/run_some, a shorter version of run_all. I'll
slowly add tests to this as I verify they work, then I can
work on fixing the once which don't.
Also, don't touch man/ if not -enable-man.
Changelog:
Apr 22: change the subid list api as recomended by Dan Walsh.
Apr 23: implement get_subid_owner
Apr 24: implement range add/release
Apr 25: finish tests and rebase
May 10: make @owner const
Signed-off-by: Serge Hallyn <serge@hallyn.com>
Here's a sad story:
* 70971457 is merged into shadow, allowing newgidmap/newuidmap to be
installed with file caps rather than setuid.
* https://bugs.archlinux.org/task/63248 is filed to take advantage of
this.
* The arch maintainer of the 'shadow' package notices that this doesn't
work, and submits a pull request to fix this in shadow.
* edf7547ad5 is merged, fixing the post install hooks.
The problem here is that distros have been building shadow with PAM for
O(years), but the install hooks have silently failed due to the
combination of the directory mismatch (suidubins vs suidsbins) and later
success with setuid'ing newgidmap/newuidmap.
With the install hooks fixed, those of us (Arch[1] and Gentoo[2] so far)
who never built shadow explicitly with --enable-account-tools-setuid are
now getting setuid account tools, and don't have PAM configuration
suitable for use with setuid account management tools.
It's entirely unclear to me why you'd want this, but I assume there's
some reason out there for it existing. Regardless, setuid binaries are
dangerous and shouldn't be enabled by default without good reason.
[1] https://bugs.archlinux.org/task/64836
[2] https://bugs.gentoo.org/702252
With this, it is possible for Linux distributors to store their
supplied default configuration files somewhere below /usr, while
/etc only contains the changes made by the user. The new option
--enable-vendordir defines where the shadow suite should additional
look for login.defs if this file is not in /etc.
libeconf is a key/value configuration file reading library, which
handles the split of configuration files in different locations
and merges them transparently for the application.
A configure error occurs when /bin/sh -> dash:
checking for is_selinux_enabled in -lselinux... yes
checking for semanage_connect in -lsemanage... yes
configure: 16322: test: yesyes: unexpected operator
Use "=" instead of "==" since dash doesn't support this operator.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
