emo/sysvinit
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
bd0005e9b8
sysvinit/doc/Changelog
Jesse bd0005e9b8 Added define for GNU Hurd to pull in major/minor macros and 
allow bootlogd to compile on Hurd.
2022-04-16 16:12:03 -03:00

1241 lines
56 KiB
Plaintext
Raw Blame History

sysvinit (3.03) unreleased; urgency=low
* Mark Hindley supplied patch to make bootlogd compile
on GNU Hurd systems. Was missing major/minor macro.
sysvinit (3.03) released; urgency=low
* Fixed formatting in init.8 man page.
Patch provided by Mark Hindley.
* Fixed compile error on GNU Hurd and musl-base systems. Due to missing MAX_PATH definition.
Error reported by Mark Hindly.
sysvinit (3.02) released; urgency=low
* Added q and Q flags to synopsis in shutdown manual page.
* Applied fixes for markup and spacing in manual pages.
Patch provided by Mario Blattermann.
* Added translation framework (po4a) from Mario Blttermann.
* Added Makefile for man/ directory. Will handle translations
and substitutions.
* Applied new translations for multiple languages from Mario Blattermann.
* Added ability to use "@" symbol in command named in the inittab file. This
treats commands as literal and does not launch a shell to interpret them.
* Updated inittab manual page to include overview of symbols which trigger
a shell interpretor and how to disable them using the @ symbol.
* Introduced change which adds error checking in bootlogd when performing
chdir(). - Provided by Alexander Vickberg
* Add check for console using TIOCGDEV on Linux systems in bootlogd to
make finding console more robust. - Provided by Alexander Vickberg
sysvinit (3.01) released; urgency=low
* Default to showing processes in the uninterruptable state (D).
The -z flag no longer affects whether processes in D state are shown.
The -z flag does still toggle whether zombie (Z) processes are shown.
* Removed unnecessary check which is always true from init tab parsing.
sysvinit (3.00) released; urgency=low
* Applied patch from Matthias Schiffer which allows bootlogd to read from
a wider range of consoles. The console name is already passed in from the
kernel command line using "console=". We no longer filter out names as strictly
but do now check to confirm the "console=" device points to a valid TTY.
sysvinit (2.99) released; urgency=low
* Fixed typos and missing underlines in shutdown manual page.
Corrections provided by Helge Kreutzmann.
sysvinit (2.98) released; urgency=low
* Fixed time parsing in shutdown when there is a + in front of a 0 time offset.
Commands with a positive time offset (+1) would work but +0 fails.
This has been corrected by Arkadiusz Miskiewicz.
sysvinit (2.97) released; urgency=low
* Check $(ROOT) filesystem for libcrypt instead of a hardcoded path to /usr.
Added logsave and readbootlog to list of files git ignores.
- Patches provided by Petr Ovtchenkov.
* Code clean-up and making sure we avoid freeing unused memory.
Patch provided by David Hoyer.
* Added shell script from Trek which converts systemd unit files
into init.d style scripts.
* Added patch from Didier Gaudin which allows init to load configuration
data from files stored in /etc/inittab.d/
* Added patch from William Shipley which allows shutdown time to be specified
in the format +hh:mm. This is in addition to the existing formats such as
hh:mm, +m, and "now".
* Fixed typos in manual pages. Submitted by Helge Kreutzmann.
sysvinit (2.96) released; urgency=low
[ Jesse Smith ]
* Added -z command line parameter to pidof which tells pidof to
try to find processes in uninterruptible (D) or zombie (Z) states.
This can cause pidof to hang, but produces a more complete process
list.
Closes Savannah bug #56534
* Reformatted init code to make if/while logic more clear.
* Cleaned up some output from readbootlog.
* Added -e flag to bootlogd. When -e is used, data saved
to the boot log file does not have escape characters
removed. This means colour and cursor movement codes
stay in the log file. The may then look nicer when
read with "less -R', but may appear cluttered or
out of alignment when viewed with other, plain-text tools.
When -e is not used, escape characters are removed/filtered.
Closes Debian bug #672361.
* Make sure src/Makefile cleans up all executable files
when parent Makefile calls "make clean".
sysvinit (2.95) released; urgency=low
[ Jesse Smith ]
* Fixed various typos and control codes in manual pages.
Patch provided by Bjarni Ingi Gislason.
* Dropped "-f" format flag for pidof command as it
could be used to print information from memory or crash
pidof. Replaced flag with "-d" which allows for a custom
separator to be used between listed PIDs.
Patch supplied by KatolaZ.
* Updated manual page to describe -h and its modifiers (-H and -P)
in more detail. Should close Debian bug #374039.
* Use millisecond delays in init so that shutdown
can happen without a near-full-second delay after
all processes have terminated. Replaced do_sleep()
with do_msleep(), provided by Serge Belyshev.
* Replaced hardwired sleep constants in init.c with
defined constants for easy updating in the future.
* Accepted patch from Luc Gommans which explains why zombie and
deep sleep processes (Z and D) may be hidden from pidof.
* Removed link instruction against sepol library from src/Makefile.
This has no change to the resulting binary, just makes the
Makefile cleaner.
sysvinit (2.94) released; urgency=low
[ Jesse Smith ]
* When the halt command is called with the -p flag (or as poweroff)
the command now passes the "-h -P" flags to shutdown. This
in turn sets the INIT_HALT environment variable to POWEROFF.
Assuming this value is checked by initscripts during the
shutting down procedure, it should cause the system to
be powered off.
If halt is called without -p then the value of INIT_HALT
is not set and the default action (often set in /etc/default/halt)
is taken.
* Removed unnecessary malloc.h includes. Memory allocation
and freeing is now handled in stdlib.h
* Added defines for FreeBSD to make some components compile
on FreeBSD 11.
* Increased the size of the kernel command line buffer in bootlogd
from 256 characters to 4096. This size is defined in KERNEL_COMMAND_LENGTH
for easy modification downstream.
* Added logsave.c and logsave.8 manual page from e2fsprogs to make
sure logsave is available to initscripts.
* Updated src/Makefile to make sure bootlogd compiles with Clang.
* Use defined constants for password length in sulogin. Makes
it easier to update/patch later.
* Minor code fixes across multiple source files to avoid buffer
overflows, or uninitialized strings.
* Changed the way the "when" variable is used internally in shutdown.c.
It starts as a NULL pointer, then might get set as a pointer to optarg,
then it might get set to point to an argv parameter, then it might have
a string value copied into it, over-writing the original data. We should
not risk over-writing internal variables which might get used for something
else (it's rude and security risk). Set up "when" as its own buffer
that has data from optargs and/or argv copied into it.
* Fixed typo in init.8 manual page.
* Updated text of fstab-decode to explain what the utility does.
sysvinit (2.93) released; urgency=low
[ Jesse Smith ]
* Fixed typo in pidof which would prevent the -o (omit PID)
flag from working.
Fixes Debian bug ##913394.
* Fixed error where pidof would not omit checking PIDs passed
to it when the -o flag was used.
Fixes Debian bug #913394.
sysvinit (2.92) released; urgency=low
[ Jesse Smith ]
* The shutdown and init commands were using different default delays between
sending processes SIGTERM and SIGKILL - they were 3 and 5 seconds, respectively.
Unified these on 3 seconds, using a new defined value in init.h.
Updated shutdown manual page to reflect the change and better explain
how -t and -n flags work.
Updated the init manual page with the new default value.
The updated documentation resolves Debian bug #375274.
* Remove PC speaker beep from shutdown process in dowall.c.
Closes Debian bug #614893.
Patch provided by Andreas Fackler.
* Removed unused Version variable from wall.c.
* Updated halt/reboot manual page to acknowledge the -i
flag may not properly shut down network interfaces if the interface
does not have an IP address.
Addresses Debian bug #361935.
* Applied patch from Daniel Povey which should allow killall5/pidof to
avoid locking up if it encounters stopped or zombie processes
due to broken NFS mount points.
This should allow Debian bug #719273 to be closed.
* Applied patch from Regid Ichira to clarify shutdown command
line options. Updated manual page for shutdown.
Closes Debian bug #630661.
* shutdown command was setting environment variable INIT_HALT to
"POWERDOWN", this should have been "POWEROFF" as specified in the
manual page. Fixed code to match manual page and init scripts.
Closes Debian bugs #717531 and #590895
* Added -l flag to "last" command. When used it allows "last" to
display usernames longer than 8 characters long.
* Added -q and -Q flags to shutdown command to make the "system is going down"
message appear less often. The -q flag causes messages to only appear at the
10 minute, 5 minute and x-hour intervals.
The -Q flag maintains complete silence up until the final "now" warning.
* Mention GRUB as a potential boot loader in init page since LILO is
rarely used anymore, outside of Slackware.
* Swapped out ECHOPRT for ECHOE in stty settings when init brings up
emergency console. Should make backspace-erasing characters work
more naturally.
Closes Debian bug #402847.
* Updated src/Makefile to make sure we build all the software before
attempting to install.
* Removed typos from pidof manual page and killall5 page.
Closes Debian bugs #815839, #905245 and #890478
* Added -f <format> option to pidof program to allow printf
style formatting.
Closes Debian bug #571590
Thanks to Philipp Marek for the patch.
* Added new tool (readbootlog) which will read the /var/log/boot file
produced by bootlogd. The output is displayed cleaned up so there
are no control characters. This avoids the need to use sed or related
tools to try to clean up the contents of the log.
* Added manual page for readbootlog program. Updated bootlogd page
to reference it. Closes Debian bug #725123.
* Updated the shutdown manual page to try to make it more clear
where we are talking about an initscript called halt or the halt
program. Likewise whether we are talking about the shutdown process
or the specific shutdown program.
Should address Debian bug #374039.
* Added patch from Samuel Thibault to make project compile
on Hurd branch of Debian.
sysvinit (2.91) world; urgency=low
[ Jesse Smith ]
* Adjusted order of compile flags to make it easier for downstream
to adjust optimization level. Patch provided by Matias Fonzo.
Can now set optimization level in CFLAGS variable.
* Added --version command line flag to display current version info.
Updated manual page for init.8 to match.
* Version information is now fetched and defined by the Makefile.
No more need to update the version manually in the init.c source.
* The init process now writes the current runlevel to /var/run/runlevel.
This information can be read by the "runlevel" command as well as "halt"
and "reboot". Having the information logged in /var/run/runlevel as
well as the utmp file means systems without utmp (like those running
the musl C library) can still check the current runlevel. This is
useful when running halt/reboot as these programs want to check the
runlevel.
* Added patch from Walter Harms which allows pidof to run without
displaying output. In this mode pidof simply returns true or false
without displaying PID values.
Updated manual page with new -q (quiet) mode.
Added -h flag for pidof, which was recognized before, but not used.
The -h flag now displays brief usage information for pidof.
* Added check for kernel parameter init.autocon=1. If this exists, then
init will try to open its own console. If not, then any console=
parameters will be ignored. This avoids conflicts with native kernel
created consoles.
sysvinit (2.90) world; urgency=low
[ Jesse Smith ]
* Updated some comments in init.c to answer questions or
remove old notes we no longer need.
* Removed unneeded "count" variable in utmpdump.c.
* Fixed typo in accidental wrote_wtmp_rlevel == 0 || wrote_wtmp_rlevel
comparison so the latter is wrote_utmp_rlevel.
* Simplified logic in mountpoint.c when testing for same device or same inode.
Thanks to David Binderman for pointing out the above three issues.
* When we run shutdown and then the computer is put to sleep, the
shutdown command recognizes time has passed and continues its
countdown taking the time lapse into consideration. This prevents
longer waits if we slept past the time we should have shutdown.
Accurate to the nearest minute.
Closes Savannah bug #36279.
* Added document article and manual page for the initctl (/run/initctl)
named pipe. Makes it easier for people to communicate with and
extend communication to init.
* Added check that named pipe is open before trying to close it
when something goes wrong or we receive SIGUSER1. Avoids potential
crash if we receive SIGUSR1 while pipe is not open.
* Added new signal handler for SIGUSR2. When init receives SIGUSR2
it closes (and leaves closed) the named pipe /run/initctl. This
can be used to make sure init does not have any files open. However,
it also means we cannot switch run levels or bring down the system.
The pipe can be re-opened by sending init the SIGUSR1 signal.
* Added "Fall through" comments to some switch statements where multiple
approaches are tried in order to prevent warnings from GCC 7 (and newer).
(Thanks to Matias Fonzo for this fix.)
* Added includes on Linux for sys/sysmacros.h as the old defines in
the sys/types.h file will be removed in the future.
(Thanks to Matias Fonzo for this fix.)
* Removed old LSM file.
Added .gitignore files to avoid git tracking object files.
Removed old start-stop-daemon from contrib directory.
(Patches provided by Guillem Jover.)
* Cleaned up most warnings generated by GCC 7 & 8. We still
get some from faulty "nonstring" reports, but silencing them on
GCC 8 results in more warnings on GCC 7 and Clang, so leaving them
for now.
* Fixed compile error on Fedora 28 where crypt() will not link due to
undocumented dependency change.
* Updated Makefile to make sure correct version number and correct
version of files are used. Makefile was pulling from master to create
tarballs with old version information when trying to create beta
snapshot.
* Updated version information in init.c
* Updated compiler flag from -fstack-protector to -fstack-protector-strong
for better protection.
* Cleaned up toplevel Makefile so it stops creating unnecessary temporary
directories.
* Fixed typo in mountpoint.c. Patch provided by Radostin Stoyanov.
sysvinit (2.89) world; urgency=low
[ Jesse Smith ]
* Updated mountpoint command with -p flag. The -p flag causes
mountpoint to search for circular mount points. For example, if
/a/b/c/d is a mount point for /a/b then the former is a valid
mount point. This only works on Linux since it uses /proc/mounts.
Updated manual page to match. This fix closes Savannah bug #37114.
* Removed two sleep calls when we are doing sync anyway to make sure
data is being written. Speeds up reboot time by about two seconds.
* Fixed Clang compiler warning regarding variable data parameters to sprintf().
* Updated top-level Makefile to work with git repo instead of old svn repo.
* Removed unused variables and findtty() function in bootlogd
* Add checks to return code for fscanf() called in init.c.
This mostly just cleans up compiler warnings.
* Perform error check on setuid() call as suggested in manual page.
* Fix typo in killall5.c
Move initscript sample file from "src" to "doc" directory and updated
Makefile to match.
* Allow multiple console output
When booting a kernel with multiple serial console support, or multuiple
console arguments ala "console=tty1 console=ttyS0,9600" the kernel will output
messages to all consoles, init however will not. It will only send output to,
and accept input from, the last of the consoles.
This patch fixes it.
(Patch provided by Martin Buck.)
* Added Patch from Debian developer Mats Erik Andersson to make
ioctl work on GNU/kFreeBSD. Patches bootlogd.
* Added Robert Millan's Debian patch to set TERM variable to xterm (instead
of cons25) when running on GNU/kFreeBSD.
* Added Robert Millan's Debian patch to use /run/initctl as the named
pipe for communicating. This works around a limitation on the kFreeBSD
branch which prevents us from using /dev/initctl for pipes.
* Confirmed we have applied Guillem Jover's patch to make
ifdown work on FreeBSD.
* Confirmed we have Debian patch to fix enabling SELinux.
(Credit to Petter Reinholdtsen)
* Confirmed we have Debian patch to make sure utf-8 flag is not cleared from tty.
(Credit to Samuel Thibault)
* Confirmed we have Roger Leigh's Makefile patch to allow building
with multiarch libcrypt.
* Applied Justus Winter's symlink patch to make sure killall5
builds and runs on Hurd.
* Confirmed we have Werner Fink's PATH_MAX patch for getting
killall5 to build on Hurd.
* Made sure we have Petter Reinholdtsen's patch to init.c which
allows init to build on GNU/kFreeBSD despite missing VSWTC.
* Dropping Debian patch to use /run/nologin instead of /etc/nologin in paths.h.
Seems every distribution uses a different location. Oracle uses /etc/nologin,
CentOS seems to use /var/run/nologin.
We will use /etc/nologin and let distros patch to suit their own preference.
* Updated halt.8 man page with corrections from
Christoph Anton Mitterer.
* Confirmed we have applied patch from Bjarni Ingi Gislason
which fixes typo in fstab-decode man page.
* Applied Debian patch to allow init to build on GNU Hurd.
(Credit: Roger Leigh)
* Confirmed we have Debian patch from developer Johannes Truschnigg
which informs the user of field size limit.
* Applied patch from Debian to the init manual page (init.8)
to better address runlevels. (Author unknown)
* The pidof command used to discover the correct PID of
a process even if the wrong path was given. For example
pidof /wrongpath/sleep would find the PID of a command run as "sleep".
This bug was reported on Launchpad for Ubuntu and on Savannah.
https://bugs.launchpad.net/ubuntu/+source/sysvinit/+bug/1546126
http://savannah.nongnu.org/bugs/?47196
This bug appears to have been fixed in the development branch,
allowing these bugs to be tested/closed.
* Confirmed Savannah bug #37114 (mountpoint does not detect
mount points using --bind on same file system) still exists,
but fixed in Debian and Red Hat.
Considering this bug closed since distributions are using
util-linux's mountpoint program and ours is no longer
built/used by default.
Considered importing util-linux mountpoint but that would duplicate
effort and pull in a new dependency on libmount.
* Problem with pidof breaks after prelink (Savannah bug #34992)
fixed. Patch supplied by Dave Dykstra.
* Patch to automatically spawn a getty on kernel consoles
The feature is useful for developers and admins that occasionally need
to boot with e.g. console=ttyS0.
The built in default can be overridden via inittab for each device. An
entry like "S0::off:" turns off the getty on ttyS0.
characters in log file. Also makes parsing easier.
This should close Savannah bug report 36528.
http://savannah.nongnu.org/bugs/?36528
* Applied patches provided in Savannah bug report 49991. Fix tabs in
bootlogd and avoid printing uninitialized "buf" variable when
consolename() fails.
[ Werner Fink ]
* Do not forget room for last NULL of new environment (was
local bug 35866)
* Handle deleted binaries in pidof (was local bug #34992)
* Allow init to delete extra environment variables (was local bug
#35858)
* Avoid that init double environment variables for its children
(was local bug #35855)
* Remove man-db tag for encoding for canonical man
* Sulogin: try to detect the real device(s) used for the system console
/dev/console if but only if /dev/console is used. On Linux this can
be more than one device, e.g. a serial line as well as a virtual
console as well as a simple printer.
* Fix counting message lines in wall. Patch from Petr Lautrbach.
* Fix bad printf conversion specifier in wall. Patch from Sébastien Luttringer.
* Add patches from Openwall project. Thanks goes to Solar Designer.
* Add code to detect the system consoles with the help of the
new /proc/consoles files of linux kernel 2.6.38+
* Try to make utmpdump IPv6 valid, change based on suggestion from
Navdeep Bhatia (see local bug #32429)
* Fix signal and alarm handling based on the patch from Florent Viard.
(was local bug #32304)
* Add fix for Redhat bug #573346: last incorrectly displays IPv6
addresses (was local bug #29497)
* Correct fix for Debian bug #547073: use IUTF8 flag if defined
and if already set to make sure the utf-8 flag is not cleared
from the tty. Patch from Samuel Thibault.
* Include limits.h in killall.c to enforce definition of PATH_MAX
* Fix sysvinit bug #29758 Linker invocation should not contain
headers. Change based on patch from Elias Pipping.
* Add fix for Debian bug #580272: use return value 1 of
is_selinux_enabled() to determine if SELinux is enabled,
otherwise initialize SELinux and load the policy. Patch from
Petter Reinholdtsen.
* Make quotes visible in example of the manual page of fstab-decode
* Sulogin: enforce reconnection of stdin/stdout/stderr if a device
was specified.
* Sulogin: if zero is read at reading the passwd guess it's done.
* Sulogin: respect byte order that is do not mix chars and ints
* Shutdown: use PATH_DEFAULT as suggested by Paul Arthur in local bug #36101
* Killall5/pidof: handle strange names of executables (local bug #36252)
* Sulogin: be aware the crypt(3) may fail (local bug #36313)
[ Petter Reinholdtsen ]
* Next release will be 2.89dsf.
* Add #ifdef in bootlogd.c to avoid gcc warnings about unused
variable on non-linux platforms.
* Only set the VSWTC field for termios in init if it is available,
to get the source building on FreeBSD.
* Add some code to be able to detect programs even as user with
kernel 3.0 and above
* Improve message printed when signaling processes to stop.
Patch from Matias A. Fonzo at the dragora project.
* Rename internal functions warn() and shutdown() in the shutdown
binary to avoid surprising dynamic library name resolution
conflict with NSS modules. Patch from Richard Tollerton.
* Try harder to find libcrypt.*, even if there is no static library
available. Also look in /usr/lib/*/ for the library, to handle
Debian multiarch systems. Based on patch from Andrew Gregory.
* Adjust included headers to be compatible with the musl C
library. Patch from Matias A. Fonzo and Dragora.
* Move dovoid() macro from #ifdef__GLIBC__ to #ifdef __linux__,
to match the condutions of the place where it is used. Thanks
to Matias A. Fonzo for noticing.
* Define _XOPEN_SOURCE when building to get crypt() from <unistd.h>
instead of using <crypt.h> in sulogin.c, to get the source building
with the musl C library.
* Use sysconf(_SC_SYMLOOP_MAX) instead of MAXSYMLINKS. If sysconf
returns an error, fall back to MAXSYMLINKS on platforms that
define it. Fixes build on Hurd. Patch from Justus Winter and
Debian.
* Adjust makefile to make it easier to link all binaries statically.
Patch from Matias A. Fonzo and Dragora.
* Rewrite findtty() in bootlogd.c to not chance working directory, to
reduce the amount of failure that can happin in that function.
* Adapt bootlogd TIOCCONS call to kfreebsd. Patch from Mats Erik
Andersson and Debian.
* Document length limit for the process field in the inittab. Patch
from Johannes Truschnigg and Debian.
* Fix typo in fstab-decode(8) font escape. Patch from Bjarni Ingi
Gislason and Debian.
* Port ifdown.c to FreeBSD. Patch from Guillem Jover and Debian.
* Drop dsf part from version number. It no longer make sense to keep.
* Remove obsolete/ directory from tarball. None of it have been useful
for many years.
* Make it possible to specify the initctl path as a compile time
define INIT_FIFO.
* Use narrowly scoped file descriptor for handling opened TTY in
spawn(). Patch from Michał Kulling.
* Check exit code from dup() in spawn() and log error if it fail.
Patch from Michał Kulling.
-- Petter Reinholdtsen <pere@hungry.com> Sun Apr 11 11:28:55 CEST 2010
sysvinit (2.88dsf) world; urgency=low
[ Petter Reinholdtsen ]
* Mention new home on Savannah in README.
* Revert change from Fedora/RedHat where the now obsolete command
INIT_CMD_CHANGECONS was introduced. Based on feedback and patch
from Bill Nottingham.
* Adjust makefile to make sure the install directories are created
before files are copied into them.
* Simplify build rules, based on patch from Mike Frysinger and Gentoo.
* Fix minor bug in optimizing of argument parsing. Based on
report from jakemus on freshmeat.
* Add casts to get rid of compiler warning about signed/unsigned issues.
* Change tty handling in init to make sure the UTF-8 flag is not cleared
on boot. Patch from Samuel Thibault.
* Add Makefile in toplevel directory.
* Print usage information when shutdown is used by non-root user.
Patch from Mike Frysinger and Gentoo.
* Sync shutdown manual page and usage information. Patch from Mike
Frysinger and Gentoo.
* Fix race condition in utmp writing. Patch from Gil Kloepfer via
Mike Frysinger and Gentoo.
* Rewrite findtty() in bootlogd to recursively search /dev/ for the
correct device, to handle terminal devices for example in /dev/pty/.
Patch from Debian.
* Make sure bootlogd findpty() returns an error value when it fails to
find a usable pty. Patch from Rob Leslie via Debian.
* Make sure bootlogd fflush() every line, even if asked not to flush
to disk using fdatasync(). Patch from Scott Gifford via Debian.
* Add compatibility code to handle old path "/etc/powerstatus" for a
while.
* Include definition for MNT_DETACH which is missing in older GNU libc
headers.
* Do not strip binaries before installing them, to make it easier to
get binaries with debug information installed.
[ Werner Fink ]
* Add the comment from Andrea Arcangeli about the correct
place of setting the default childhandler within spawn().
* Make sure that newline is printed out for last(1) even
if an utmp record entry is truncated.
* Check if utmp not only exists but also is writable and delay
writing out of the utmp runlevel record if utmp is not writable.
* Be able to find libcrypt also on 64 bit based architectures.
* Add option -w to the last command to display the full user and
domain names in the output. Patch from Petr Lautrbach.
* Add a manual page for utmpdump as this tool is sometimes
very useful even if not intended for normal use.
* Use paths.h macros for wall
* Change path "/etc/powerstatus" to "/var/run/powerstatus"
* Detected also removable block devices at halt/reboot to be able
to flush data and send them the ATA standby command. This should
avoid data loss on USB sticks and other removable block devices.
* Flush block devices on halt/reboot if not done by the kernel.
* Set SHELL to /bin/sh in the environmant of shutdown.
* Retry to write out shutdown messages if interrupted.
* pidof/killall5 - make omit pid list a dynamic one.
* pidof - provide '-n' to skip stat(2) syscall on network based FS.
* init - avoid compiler warnings
* init - initialize console by using the macros from ttydefaults.h
* init - add the possibility to ignore further interrupts from keyboard
* init - add the possibility to set sane terminal line settings
* sulogin - add the possibility to reset the terminal io
* Fix some minor problems
* init - enable is_selinux_enabled() to detect selinuxfs
* Add fix for Debian bug #536574 -- Can be enabled by -DACCTON_OFF
* Add helper program fstab-decode to make it easier to handle
/etc/mtab content. Patch by Miloslav Trmac and Fedora.
* Add fix for Debian bug #335023 - Make sure TERM is set on FreeBSD.
* Add fix for Debian bug #374038 - Make it clear that shutdown -c can
only cancel a waiting shutdown, not an active one.
* Add note to pidof manual page about the use of readlink(2). Patch by
Bill Nottingham and Fedora.
* Add PAM patch contrib/notify-pam-dead.patch based on Debian bug
#68621, which will add PAM support for programs spawned by init on
the console like sulogin. Based on patch by Topi Miettinen. This
patch is not applied by default yet while we review its
usefulness. It is only helpful for session handling, as sulogin
do not use and will not use a PAM conv() function. The current
sulogin is able to handle DES as well as MD5, SHA, and Blowfish
encrypted passwords due using getpwnam(3).
* Move utmp/wtmp before the execvp() in spawn() to be sure to
use the correct pid even on a controlling tty
* Remaining problem is that the pid of the second fork() for
getting a controlling tty isn't that reported by spawn()
* Re-enable writing utmp/wtmp for boot scripts
* Extend sulogin to support additional encryption algorithms
* Re-enable maintenance message of sulogin
* Enable the sulogin fallback password check to handle MD5, SHA, and
Blowfish encrypted passwords in case of getpwnam(3) fails.
* sulogin picking the SELinux context was broken. Patch by Daniel Walsh
-- Petter Reinholdtsen <pere@hungry.com> Sun Apr 11 11:28:55 CEST 2010
sysvinit (2.87dsf) world; urgency=low
* Fix typos and do minor updates in the manual pages.
* Correct section of mountpoint(1).
* Document -e and -t options for telinit in init(8).
* Update address of FSF in the COPYRIGHT file.
* Document in halt(8) that -n might not disable all syncing.
Patch by Bill Nottingham and Fedora
* Adjust output from "last -x". In reboot lines, print endpoint
of uptime too. In shutdown lines print downtimes rather than
the time between downs. Fix typo in string compare in last.c.
Patch by Thomas Hood.
* Improve handling of IPv6 addresses in last. Patch from Fedora.
* Document last options in usage information, previously only
mentioned in the manual page.
* Add new option -F to last, to output full date string instead
of the short form provided by default. Patch from Olaf Dabrunz
and SuSe.
* Adjust build rules to make sure the installed binaries
are stripped.
* Increase the compiler warning level when building.
* Fix utmp/wtmp updating on 64-bit platforms. Patch by Bill
Nottingham and Fedora.
* Avoid unchecked return value from malloc() in utmpdump.
Patch from Christian 'Dr. Disk' Hechelmann and Fedora.
* Make sure to use execle and no execl when passing environment to
the new process. Patch from RedHat.
* Correct init to make sure the waiting status is preserved across
re-exec. Patch from RedHat.
* Correct init to avoid race condition when starting programs during
boot. Patch from SuSe.
* Allow 'telinit u' in runlevels 0 and 6. Patch from Thomas Hood.
* Change install rules to make pidof an absolute symlink. Patch from
Thomas Hood.
* Improve error message from init if fork() fail. Patch found in Suse.
* Add support for SE Linux capability handling. Patch from Manoj
Srivastava, adjusted to avoid aborting if SE policy was loaded in
the initrd with patch from Bill Nottingham and Fedora.
* Add -c option to pidof for only matching processes with the same
process root. Ignore -c when not running as root. Patch from
Thomas Woerner and Fedora.
* Adjust init to terminate argv0 with one 0 rather than two so that
process name can be one character longer. Patch by Kir Kolyshkin.
* Make sure bootlogd exit with non-error exit code when forking of
the child successfully.
* Add bootlogd option -s to make it possible to control the use of
fdatasync(). Patch from Thomas Hood.
* Add bootlogd option -c to tell it to create the log file if it does
not exist. Patch from Thomas Hood.
* Let bootlogd also look at ttyB* devices to work on HPPA. Patch
from Thomas Hood.
* Change init to use setenv() instead of putenv, make sure the PATH
value is usable on re-exec. Patch from Thomas Hood.
* Add usleep in killall5 after killing processes, to force the kernel
to reschedule. Patch from SuSe.
* Modify pidof to not print empty line if no pid was found.
* Modify init and sulogin to fix emergency mode's tty, making sure ^C
and ^Z work when booting with 'emergency' kernel option. Patch from
Samuel Thibault.
* Modify init to allow some time for failed opens to resolve themselves.
Patch from Bill Nottingham and Fedora.
* Modify init to shut down IDE, SCSI and SATA disks properly. Patches
from Sebastian Reichelt, Werner Fink and SuSe.
* Modify wall to use UT_LINESIZE from <utmp.h> instead of hardcoded
string lengths. Patch from SuSe.
* Change wall to make halt include hostname in output.
* Change killall to avoid killing init by mistake. Patch from SuSe.
* Change killall5 to use the exit value to report if it found any
processes to kill. Patch from Debian.
* Add option -o opmitpid to killall5, to make it possible to skip
some pids during shutdown. Based on patch from Colin Watson and
Ubuntu.
* Add references between killall5 and pidof manual pages. Patch from Debian.
* Modify killall to work better with user space file system, by
changing cwd to /proc when stopping and killing processes, and
avoiding stat() when the value isn't used. Also, lock process
pages in memory to avoid paging when user processes are stopped.
Patch from Debian and Goswin von Brederlow with changes by Kel
Modderman.
* Change shutdown to only accept flags -H and -P with the -h flag,
and document this requirement in the manual page.
* Change reboot/halt to work properly when used as a login shell.
Patch by Dale R. Worley and Fedora.
* Let sulogin fall back to the statically linked /bin/sash if both roots
shell and /bin/sh fail to execute.
-- Petter Reinholdtsen <pere@hungry.com> Sun, 12 Jul 2009 19:58:10 +0200
sysvinit (2.86) cistron; urgency=low
* Fixed up bootlogd to read /proc/cmdline. Also keep an internal
linebuffer to process \r, \t and ^H. It is becoming usable.
* Applied trivial OWL patches
* Block signals in syslog(), since syslog() is not re-entrant
(James Olin Oden <joden@malachi.lee.k12.nc.us>, redhat bug #97534)
* Minor adjustments so that sysvinit compiles on the Hurd
* killall5 now skips kernel threads
* Inittab entries with both 'S' and other runlevels were broken.
Fix by Bryan Kadzban <bryan@kadzban.is-a-geek.net>
* Changed initreq.h to be more flexible and forwards-compatible.
* You can now through /dev/initctl set environment variables in
init that will be inherited by its children. For now, only
variables prefixed with INIT_ can be set and the maximum is
16 variables. There's also a length limit due to the size
of struct init_request, so it should be safe from abuse.
* Option -P and -H to shutdown set INIT_HALT=POWERDOWN and
INIT_HALT=HALT as environment variables as described above
* Add "mountpoint" utility.
* Slightly better algorithm in killall5.c:pidof()
* Added some patches from fedora-core (halt-usage, last -t,
sulogin-message, user-console)
-- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 30 Jul 2004 14:14:58 +0200
sysvinit (2.85) cistron; urgency=low
* Add IPv6 support in last(1)
* Sulogin: even if the root password is empty, ask for a password-
otherwise there is no way to set a timeout.
* Removed support for ioctl.save.
* Turned of support for /etc/initrunlvl and /var/run/initrunlvl
* Fixed warts in dowall.c ("Dmitry V. Levin" <ldv@altlinux.org>)
* Fix init.c::spawn(). The "f" variable was used both as file descriptor
and waitpid(2) return code. In certain circumstances, this leads to
TIOCSCTTY with wrong file descriptor (Vladimir N. Oleynik).
* Fix fd leak in sulogin (Dmitry V. Levin).
* More error checking in all wait() calling code (Dmitry V. Levin).
* Fix argv[] initialization in spawn() (Dmitry V. Levin).
* Change strncpy to strncat in most places (Dmitry V. Levin).
-- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 15 Apr 2003 16:37:57 +0200
sysvinit (2.84) cistron; urgency=low
* Don't use /etc/initlvl interface for telinit; only use /dev/initctl,
and give a clear error when that fails.
* Add -i/--init command line flag to init - this tells init
'behave as system init even if you're not PID#1'. Useful for
testing in chroot/jail type environments.
-- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 27 Nov 2001 13:10:08 +0100
sysvinit (2.83) cistron; urgency=low
* Fix bug in shutdown where it didn't check correctly for a
virtual console when checking /etc/shutdown.allow
* Fix race condition in waitpid() [Andrea Arcangeli]
* Call closelog() after openlog()/syslog() since recent libc's
keep the logging fd open and that is fd#0 aka stdin.
-- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 2 Oct 2001 23:27:06 +0200
sysvinit (2.82) cistron; urgency=low
* Print out correct version number at startup.
* Fix spelling of initttab in init(8)
-- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 23 Aug 2001 17:50:44 +0200
sysvinit (2.81) cistron; urgency=low
* Fix typo/bug in killall5/pidof, -o option failed to work since 2.79.
Reformatted source code to prevent this from happening again.
* shutdown.8: applied redhat manpage update
* sulogin: applied redhat sysvinit-2.78-sulogin-nologin.patch
* sulogin: applied redhat sysvinit-2.78-notty.patch
* sulogin: applied redhat sysvinit-2.78-sigint.patch
sysvinit (2.80) cistron; urgency=low
* Grammar/spelling fixes in shutdown.c (Christian Steinrueck)
* Don't set controlling tty for non-(sysinit,boot,single) runlevels
-- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 26 Jul 2001 13:26:56 +0200
sysvinit (2.79) cistron; urgency=low
* New upstream version
* several fixes to wall by Tim Robbins <fyre@box3n.gumbynet.org>
* Several extra boundary checks by Solar Designer
* Make /dev/console controlling tty
* Stricter checks on ownership of tty by mesg(1)
* Documented and restricted -n option to wall(1)
* Make it compile with glibc 2.2.2
* Document IO redirection in wall manpage (closes: #79491)
* Update README (closes: #85650)
* Fix init.8 manpage (closes: #75268)
* Fix typo in halt(8) manpage (closes: #67875)
* Check time argument of shutdown(8) for correctness (closes: #67825)
* Check for stale sessions in last(1) (Chris Wolf <cwolf@starclass.com>)
-- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 4 Jul 2001 15:04:36 +0200
sysvinit (2.78-2) frozen unstable; urgency=high
* Change "booting" to "reloading" message at reload
* Add "-z xxx" dummy command line argument (closes: #54717)
-- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 11 Feb 2000 12:17:54 +0100
sysvinit (2.78-1) unstable; urgency=low
* 2.78 will be the new upstream version, I'm skipping 2.77
* Shutdown now calls sync before switching the runlevel to 0 or 6,
or before unmounting filesystems if -n was used (closes: #46461)
* Some cosmetic changes to init.c (closes: #32079)
-- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 30 Dec 1999 20:40:23 +0100
sysvinit (2.77-2) unstable; urgency=low
* Fix last -i option
-- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 5 Oct 1999 21:51:50 +0200
sysvinit (2.77-1) unstable; urgency=low
* Write reboot record into utmp file as well to make rms happy
* Fork and dump core in / if SIGSEGV is received for debugging purposes
* Patch by Craig Sanders <cas@vicnet.net.au> for "last" -i option
-- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 4 Aug 1999 11:16:23 +0200
sysvinit (2.76-4) unstable; urgency=low
* Change dowall.c to handle Unix98 ptys correctly
* Add comment in rcS about usage of setup.sh and unconfigured.sh
* Shutdown now removes nologin file just before calling telinit
* SEGV handler now tries to continue after sleep of 30 seconds.
On a 386-class processor it also prints out the value of EIP.
* Fix for racecondition in check_init_fifo() by Richard Gooch
-- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 8 May 1999 17:22:57 +0200
sysvinit (2.76-3) frozen unstable; urgency=high
* Small bugfix to last.c courtesy of Danek Duvall <duvall@emufarm.ml.org>
-- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 12 Jan 1999 12:12:44 +0100
sysvinit (2.76-1) frozen unstable; urgency=high
* Fix bug in check_pipe() which crashes init on the Alpha.
-- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 3 Nov 1998 11:09:13 +0100
sysvinit (2.75-4) unstable; urgency=low
* Change sulogin password buffer to 128 characters.
* Don't print control characters in dowall.c
* Try to open getenv ("CONSOLE"), /dev/console and /dev/tty0 in order.
For backwards compatibility when you try to boot a 2.0.x kernel
with a linux > 2.1.70 /dev/console device.
* Change src/Makefile for non-debian systems (mainly, RedHat)
* Try to create /dev/initctl if not present; check every time to see
if the dev/ino of /dev/initctl has changed and re-open it. This should
help devfs a bit.
* Send SIGUSR1 to init at bootup to let it re-open /dev/initctl;
again in support of devfs.
* Moved pidof to /bin (it's only a link to killall5 anyway)
-- Miquel van Smoorenburg <miquels@cistron.nl> Mon, 5 Oct 1998 14:03:14 +0200
sysvinit (2.75-2) frozen unstable; urgency=medium
* Fix last.c again.
* Add check to see if /dev/initctl is really a FIFO
* In ifdown.c first down all shaper devices then the real devices
-- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 2 Jun 1998 22:43:01 +0200
sysvinit (2.75-1) frozen unstable; urgency=low
* Rewrote last.c to be much more memory friendly and correct,
thanks to Nick Andrew <nick@zeta.org.au> and
David Parrish <dparrish@zeta.org.au>
* Fixes bugs:
#21616: sysvinit: sulogin thinks md5 root password is bad
#21765: sysvinit: Typo in `killall5.c'
#21775: sysvinit: sysvinit does not support MD5 hashed passwords
#21990: /usr/bin/last: unnecessary memset and off-by-one bug
#22084: sysvinit 2.74-4: SIGPWR missing on sparc
#21900: init, powerfail events, and shutdown.allow
#21702: init 0 does not work as expected...
#21728: sysvinit: Typo in `init.c'
#22363: sysvinit: discrepance btw. manpage and /sbin/init
-- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 19 May 1998 11:02:29 +0200
sysvinit (2.74-4) frozen unstable; urgency=medium
* Add -o option to last to process libc5 utmp files.
* Buffer overflow fixed in init.c (not very serious; only exploitable
by root). Thanks to Chris Evans <chris@ferret.lmh.ox.ac.uk>
-- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 15 Apr 1998 17:04:33 +0200
sysvinit (2.74-1) unstable; urgency=low
* Should compile with glibc 1.99 :)
* Change behaviour of reboot(1) and halt(1) so that the default when
the runlevel can't be determined is to call shutdown.
* Added re-exec patch from Al Viro (21 Feb 1998):
'U' flag added to telinit. It forces init to re-exec itself
(passing its state through exec, certainly).
May be useful for smoother (heh) upgrades.
24 Feb 1998, AV:
did_boot made global and added to state - thanks, Miquel.
Yet another file descriptors leak - close state pipe if
re_exec fails.
-- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 12 Mar 1998 17:42:46 +0100
sysvinit (2.73-2) unstable; urgency=low
* Change _NSIG to NSIG for 2.1.x kernel includes.
-- Miquel van Smoorenburg <miquels@cistron.nl> Thu, 8 Jan 1998 16:01:02 +0100
sysvinit (2.73-1) unstable; urgency=low
* Use siginterrupt, now that system calls are restarted by default.
Main symptom was that the sulogin timeout didn't work but there
might have been more hidden problems.
* Kill process immediately if turned off in inittab
* Fixed sulogin check on tty arg.
* Use strerror() instead of sys_errlist
* wall now supports a '-n' option to suppress [most of] the banner.
Debian doesn't use sysvinit's wall, but apparently Redhat does.
* Add '-F' (forcefsck) option to shutdown
* Close and reopen /dev/initctl on SIGUSR1 (mainly for a /dev in ram)
-- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 3 Jan 1998 16:32:39 +0100
sysvinit (2.72-3) unstable; urgency=low
* Add extra fork() in dowall.c to avoid hanging in rare cases
-- Miquel van Smoorenburg <miquels@cistron.nl> Wed, 22 Oct 1997 14:44:00 +0200
sysvinit (2.72) unstable; urgency=low
* Applied manual page patches by Bill Hawes <whawes@star.net>. Thanks Bill!
* Applied patches to the sample Slackware scripts by
"Jonathan I. Kamens" <jik@kamens.brookline.ma.us>
* Fix halt and reboot runlevels 0 & 6 check.
* Only say "no more processes left in runlevel x" once
* Fix race condition with SIGCHLD in spawn()
(thanks to Alon Ziv <alonz@CS.Technion.AC.IL>)
* Compress all manpages (missed 2)
* Compiled for libc6
* Added poweroff patch by Roderich Schupp <rsch@ExperTeam.de>
-- Miquel van Smoorenburg <miquels@cistron.nl> Sun, 12 Oct 1997 17:20:17 +0200
sysvinit (2.71-2) frozen unstable; urgency=low
* Print 2.71 instead of 2.70 on startup :)
-- Miquel van Smoorenburg <miquels@cistron.nl> Mon, 5 May 1997 12:45:25 +0200
sysvinit (2.71-1) frozen unstable; urgency=high
* Added code for updwtmp() in utmp.c for glibc (2.0.3)
* Fixed all programs to use functions from utmp.c and getutent()
* Do not try to clean up utmp in init itself (Bug#9022)
* Removed sync() from main loop.
* Hopefully fixes bug #8657 (shutdown signal handling)
-- Miquel van Smoorenburg <miquels@cistron.nl> Sat, 26 Apr 1997 19:57:27 +0200
sysvinit (2.70-1) unstable; urgency=low
* Respawn fix
* Removed StUdLy CaPs from source code
* Moved files in source archive around
* Fixes for glibc (utmp handling, signal handling).
* Fixed '-d' option to last (now also works without '-a').
* Added extra checking in last.c to prevent showing dead entries
-- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 7 Feb 1997 15:31:30 +0100
sysvinit (2.69-1) frozen unstable; urgency=medium
* Fixed bug that can throw X in a loop (or any other app that reads from
/dev/tty0)
-- Miquel van Smoorenburg <miquels@cistron.nl> Sun, 1 Dec 1996 15:32:24 +0100
sysvinit (2.67-1) frozen unstable; urgency=high
* Fixes problem with /dev/console being controlling terminal of some
daemons
* Puts copyright file in the right place
-- Miquel van Smoorenburg <miquels@cistron.nl> Fri, 15 Nov 1996 12:23:33 +0100
sysvinit (2.66-1) unstable; urgency=medium
* Skipped 2.65. A development 2.65 got out by accident and is apparently
being used..
* Also compiles and runs with GNU libc (and on the Alpha)
* Fixed dowall.c not to exit when getpwuid() fails and uid == 0.
* Fixed init panic'ing on empty lines in /etc/inittab
* Changed default PATH to include /usr/local/sbin
* Set /dev/console as controlling terminal for sysinit,bootwait,wait,powerwait
This allows using ^C to interrupt some parts of eg the boot process.
* Remove old symlink in /var/log/initlvl; let init check both
/var/log and /etc itself.
-- Miquel van Smoorenburg <miquels@cistron.nl> Tue, 29 Oct 1996 13:46:54 +0100
2.66 29-Oct-1996
- Skipped 2.65. A development 2.65 got out by accident and is apparently
being used..
- Fixed dowall.c not to exit when getpwuid() fails and uid == 0.
- Fixed init panic'ing on empty lines in /etc/inittab
- Changed default PATH to include /usr/local/sbin
- Ported to Linux/Alpha and GNU libc.
- Set /dev/console as controlling terminal for sysinit,bootwait,wait,powerwait.
This allows using ^C to interrupt some parts of eg the boot process.
- Remove old symlink in /var/log/initlvl; let init check both
/var/log and /etc itself.
2.64 28-Jun-1996
- Init checks CONSOLE environment variable on startup (overrides /dev/console)
- Init sets CONSOLE variable for all its children.
- Wtmp(): when zeroing out old utmp entries, keep ut_id field
- Wtmp(): try to re-use ut_id field if possible.
- SetTerm(): only read from /etc/ioctl.save if written once.
- Included start-stop-daemon, C version (source only).
- Fixed wait() for the emergency shell.
- killall5: ignore signal before doing kill(-1, pid).
2.63 14-Jun-1996
- Fixed preinst script for Debian
- Fixed init.c to become init daemon if name is init.new
- Fixed pidof to not return PIDs of shell scripts
2.62-2 09-Jun-1996
- Changed debian /etc/init.d/boot script to create a nologin file
at boot and to remove it just before going multiuser.
2.62 31-May-1996
- Decided to release a 2.62 version with a BIG WARNING about upgrading
init in it. Will send a patch to Linus for the linux/Documentation/Changes
file so that 2.62 or later is mentioned as the version to upgrade to.
- Added docs for Slackware
2.61-3 29-May-1996
- Fixed debian/etc/init.d/network for the lo device.
- Added "-xdev" to the cd /tmp && find in debian/etc/init.d/boot
- Made remove time for files in /tmp configurable.
2.61 29-Apr-1996
- Changed /etc/init.d/boot script again
- Fixed problem in init.c with trailing whitespace after entries in inittab
- Fixed killall5 problems
- Added manpage for lastb
- Added SHELL= environment variable to sulogin
- Fixed sulogin & shadow problems
- Added timeout option to sulogin
2.60-2 16-Apr-1996
- Fixed sulogin (didn't work if root wasn't first entry in shadow file)
- Fixed mesg for systems with "tty" group (such as Debian)
- Fixed nsyslog() in killall5.c
2.60 01-Apr-1996
- Fixed race condition in init.c, resulting in hanging shutdowns.
Courtesy of Max Neunhoeffer <Max.Neunhoeffer@urz.uni-heidelberg.de>.
- Fixed debian/etc/init.d/boot for swapon and mdadd
- Added architecture to debian.control
- Added manpages for rc.boot and rc.local
- Updated inittab manpage for 4-character runlevel field
- Added debian replaces for bsdutils < version_without_mesg
- Fixed init.c so that it also works with kernels 1.3.81 and up
2.59 10-Mar-1996
- Init logs less to syslog (suspected to hang in syslog() or openlog() )
- removed closelog() from init.c
- removed time check of runlevel record in halt.
- Added options to last to get hostname from ut_addr field
- Added last and mesg to installation targets
- rewrote /etc/init.d/boot a bit.
2.58-2 04-Jan-1996
- Changed etc/init.d/rc to do a stty onlcr
- Added /var/log/initrunlvl symlink
2.58-1 31-Dec-1995
- Added the latest debian files.
- Added support for 4-character id fields (if you have libc5).
- Fixed pidof (in killall5) parsing of /proc/.../stat
- Save restore GMT setting in /etc/init.d/boot
2.57d 03-Dec-1995
- Added sulogin
- Added "-b" flag to init, gives a shell before
anything else (in case the startup scripts are screwed)
- Moved fastboot to /fastboot
- Folded in Debian patches.
- Removed old scripts
- Added debian /etc/directory.
2.57c 08-Oct-1995
- Changed over to init_request (with initreq.h)
- Processes no longer killed when "process" field
changes, change takes effect after next respawn.
2.57b xx-Aug-1995
- Bugfix release for Debian and Slackware 3.0
2.57a 10-Jul-1995
- Fixed race condition init init.c wrt got_chld
- Fixed one-off for malloc in killall5.c
- Changed dowall.c
- Console code: no relink to /dev/systty on CTRL-ALT-DEL)
2.57 22-May-1995
- Changed a few things here and there, didn't
really document it :)
2.55 17-Jan-1995
- Added option to shutdown to run standalone.
2.54 12-Jan-1995
- Added GNU copyrigh to all *.[ch] files.
- added /etc/initscript
- reboot and halt now call shutdown in runlevels 1-5
- Can run from read-only root (CDROM)
2.53 10-Oct-1994
- Renamed pidof to killall5, updated all scripts to
use killall5 instead of kill -1 ....
- Rewrote scripts to use this, and some general changes.
- Added SysV command line compatibility to shutdown.
2.52 30-Aug-1994
- Added `powerfailnow' keyword, for when UPS battery is low.
- Updated `last'.
- Fixed utmp handling (wrt. CLEAN_UTMP)
TODO:
* Make last compatible with GNU/BSD (long options?)
* update powerd
* remote SIGPWR broadcast? in powerd? (with priv. port)
* remote shutdown
2.50 14-Feb-1994
- Ignores unknown command line arguments.
- Modelled more after the "real" sysVinit
- Lots of changes all over the place.
(like showing runlevel in "ps" listing, logging
runlevel into utmp file etc)
- now using "reliable" signals instead of V7 style.
- Updated all scripts. Examples are in two directories:
etc (normal) and etc-sysv (sysv style scripts).
- runlevel 0 = halt, 1 = single user, 6 = reboot.
- added support for serial console.
- updated Propaganda, manpages.
- added shutdown access control.
2.4 24-May-93
- Send out the official version into the world as
SysVinit-2.4.tar.z.
2.4g 15-May-93
- Changed init to really catch SIGPWR 'cause we
hooked up an UPS to the Linux machine. The
keyword for catching the TreeFingerSalute is
now "ctrlaltdel" instead of "power{wait,fail}".
2.4a 22-Apr-93
- Fixed last to reckognize BSD style wtmp logging.
- Changed init to write wtmp records that are
SysV compliant but are also reckognized by the
BSD last. Added a '+' option to the 'process'
field of inittab, for getties that want to do
their own utmp/wtmp housekeeping (kludge!).
- Now accepts a runlevel on the command line,
and reckognizes the 'auto' argument. (Sets the
environment variable AUTOBOOT to YES)
2.2.3 24-Mar-93
- Ripped out the 'leave' action. To difficult, and
unneeded.
- Going single user now kills _all_ processes.
- Added '-t secs' option to all commands.
- This version is stable enough to post.
2.2 02-Mar-93
- Made wait()'s asynchronous
- Changed whole thing to one big state machine
- Now using 'pseudo levels' # & * for SYSINIT & BOOT
- Added a new type of 'action', called leave. This
process will be executed when the system goes from a
runlevel specified in it's runlevel field to a
level that's not. Nice to bring down NFS and the like.
2.1 28-Jan-93
- Fixed a bug with 'boot' and 'once'.
- Check 'initdefault' for validity.
- Reckognizes "single" as command line argument.
- Retries execvp with 'sh -c exec ..' if command
is a shell script. (shouldn't execvp do this?)
- Added patches to use syslog if defined.
2.0 08-Dec-92
- Rewrote the code totally, so started with a new
version number.
- Dropped Minix support, this code now is Linux - specific.
- With TEST switch on, this init & telinit can
run standalone for test purposes.
1.3, 05-Jul-92
- Got a 386, so installed Linux. Added 'soft' reboot
to be default under linux. Fixed some typos.
1.2, 16-Jun-92
- Bugreport from Michael Haardt ; removed deadlock
and added 'waitpid' instead of 'wait' for SYSV.
1.1, 30-Apr-92
- Read manual wrong: there is no 'action' field called
process, but all entries are of type process. Every
'process' get exec'ed by /bin/sh -c 'exec command'.
- Rapidly respawning processes are caught in the act.
- _SYSV support is really Linux support,
done by poe@daimi.aau.dk on 25-Mar-92.
1.0, 01-Feb-92
- Initial version, very primitive for the Minix
operating system. Required some mods. to the
kernel.
Reference in New Issue View Git Blame Copy Permalink