Joe Thornber
c8d3ce6af5
[thin_show_duplicates] start factoring out a chunk_stream abstraction
2015-08-24 11:18:31 +01:00
Joe Thornber
d954f230fa
[thin_show_duplicates] wip
2015-08-21 13:10:49 +01:00
Joe Thornber
94636b63d7
[thin_show_duplicates] print out the percentage of duplicates
2015-08-19 13:46:02 +01:00
Joe Thornber
929a824184
[thin_show_duplicates] add --block-sectors switch
2015-08-19 13:07:56 +01:00
Joe Thornber
519cbfd855
[thin_show_duplicates] add a progress bar
2015-08-19 12:53:11 +01:00
Joe Thornber
59a622670c
[thin_show_duplicates] wip
2015-08-19 12:32:57 +01:00
Joe Thornber
dbd0c65088
[thin_show_duplicates] stub new command
2015-08-19 09:41:14 +01:00
Joe Thornber
29c2a949f4
remove a bit of debug
2015-08-13 14:56:30 +01:00
Joe Thornber
5d28c05dc3
[thin_check] detail and mapping trees weren't being counted properly for the metadata snap.
...
This could result in block counts being unexpectedly non zero.
2015-08-04 15:14:02 +01:00
Joe Thornber
7134a58134
[thin_metadata_size] use floor rather than truncl
2015-07-30 11:45:13 +01:00
Joe Thornber
3a881e9513
[thin_delta] Allow optional arg when using -m
2015-07-28 11:29:00 +01:00
Joe Thornber
93fb540bd4
[thinp tools] move find_metadata_snap to superblock.cc
2015-07-27 14:30:09 +01:00
Joe Thornber
642ae6e7c2
Tools now open the metadata device in O_EXCL mode.
...
An attempt to stop people running the tools on active metadata.
2015-07-07 13:47:00 +01:00
Joe Thornber
f85b7cef3f
thin_dump, thin_check: Fix bug in damage reporting
2015-07-03 13:00:13 +01:00
Joe Thornber
082491d140
thin_check: tidy up some unintuitive code
2015-06-22 11:13:19 +01:00
Joe Thornber
270c0f7041
[thin_check] factor out check_space_map_counts()
2015-04-08 14:07:38 +01:00
Joe Thornber
0fee897fda
[thin_check] A space map count being too high should be a NON_FATAL error.
2015-04-08 12:32:31 +01:00
Joe Thornber
20079f3d28
Pass tm's by reference
2015-04-07 13:31:45 +01:00
Joe Thornber
ee200ba85b
Merge branch 'master' into space-map-checking
2015-04-07 12:18:23 +01:00
Joe Thornber
7f643b7050
[thin] Use specific damage visitors to improve error messages.
...
There's now a damage visitor for dev_trees, mapping_trees and
single_mapping_trees.
2015-04-07 12:16:46 +01:00
Joe Thornber
f581f34be8
add comment explaining mtree_traits
2015-04-07 12:10:38 +01:00
Joe Thornber
cc44652cc3
[thin_delta] support metadata snapshots
2015-03-25 11:10:18 +00:00
Joe Thornber
0e72f772d0
[thin_delta] Add superblock and diff tags
2015-03-25 10:09:39 +00:00
Joe Thornber
45422dbf7a
[thin_delta] Mappings were being missed off from the tail of a device
2015-03-24 13:36:45 +00:00
Joe Thornber
c6ae25417b
Add missing include to thin_trim
2015-01-17 11:45:09 +00:00
Joe Thornber
fe64da2c7c
Fix these errors:
...
thin-provisioning/thin_pool.cc:206: error: reference to 'sector_t' is ambiguous
./thin-provisioning/metadata.h:40: error: candidates are: typedef uint64_t thin_provisioning::sector_t
./block-cache/block_cache.h:20: error: typedef uint64_t bcache::sector_t
thin-provisioning/thin_pool.cc:206: error: reference to 'sector_t' is ambiguous
./thin-provisioning/metadata.h:40: error: candidates are: typedef uint64_t thin_provisioning::sector_t
./block-cache/block_cache.h:20: error: typedef uint64_t bcache::sector_t
thin-provisioning/thin_pool.cc:206: error: 'sector_t' does not name a type
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
2015-01-16 10:14:28 +00:00
Joe Thornber
8e92158055
[thin_trim] first code drop.
...
No testing done as yet.
2014-11-18 16:03:03 +00:00
Joe Thornber
41354f10f5
provide << operator for optionals
2014-09-04 11:26:43 +01:00
Joe Thornber
6f8b7e2914
[all] Build a single executable
2014-08-27 14:01:31 +01:00
Joe Thornber
828f654800
[*_restore] Add progress bar to cache_restore and era_restore.
...
A lot of refactoring common code between the restore tools.
2014-08-26 13:05:21 +01:00
Joe Thornber
d17ad86a88
[*_restore] Use a little wrapper class for the expat XML_Parser to ensure it gets destroyed.
2014-08-26 11:23:29 +01:00
Joe Thornber
a7c96c0e1e
[everything] Fix circular shared pointer references.
...
We had a cycle from transaction_manager <-> space_map, and also from
the ref_counters back up to the tm.
This prevented objects being destroyed when various programs exited.
From now on we'll try and only use a shared ptr if ownership is
implied. Otherwise a reference will be used (eg, for up pointers).
2014-08-26 11:14:49 +01:00
Joe Thornber
936e14441f
Merge branch 'master' of github.com:jthornber/thin-provisioning-tools
2014-08-06 16:32:04 +01:00
Joe Thornber
1d38b390b5
Factor common code out of the xml_format files.
2014-08-06 15:29:02 +01:00
Joe Thornber
d00aef9219
[thini_restore] add a quiet option to turn off the progress monitor
2014-08-05 12:10:34 +01:00
Joe Thornber
fccc1dfcb0
[thin_restore] Add a progress monitor
2014-08-05 11:47:57 +01:00
Joe Thornber
8321bdcf59
Merge pull request #13 from bgilbert/fix-units
...
thin_metadata_size: Fix long names of units
2014-08-05 09:34:37 +01:00
Joe Thornber
7e870ea5a6
start removing block_manager<>::block
2014-07-25 14:46:51 +01:00
Joe Thornber
b32908d5c2
work in progress
2014-07-25 10:35:04 +01:00
Joe Thornber
d517684c95
Initial code drop for merging block_cache
2014-07-22 16:41:39 +01:00
Joe Thornber
e77e8715b0
Remove ambiguity between boost::uint64_t and ::uint64_t.
...
This has been causing people problems on uclibc builds.
2014-07-02 08:19:20 +00:00
Joe Thornber
e4d82d04bd
[thin_delta] Fix bug when detecting right_only mappings
2014-06-17 16:20:38 +01:00
Joe Thornber
c8f408ac3c
[thin_delta] Update the usage
2014-06-17 15:00:38 +01:00
Joe Thornber
bb57104542
[thin_delta] By default output a simpler format that ignores the data locations.
...
Most people will access the data via the thin device itself, so
there's really no need to output the locations of the data on pool
device. Doing this allows us to run together adjacent thin blocks
(even if they are not adjacent on the pool dev).
Simple format:
<same begin="0" length="1"/>
<different begin="1" length="4"/>
<same begin="5" length="1"/>
<different begin="6" length="6"/>
<same begin="12" length="1"/>
<different begin="13" length="9"/>
<same begin="22" length="1"/>
<different begin="23" length="4"/>
<same begin="27" length="1"/>
<different begin="28" length="3"/>
<same begin="31" length="1"/>
<different begin="32" length="1"/>
The old format is available using the --verbose switch:
<same>
<range begin="0" data_begin="0" length="1"/>
</same>
<different>
<range begin="1" left_data_begin="24576" right_data_begin="16384" length="1"/>
<range begin="2" left_data_begin="24577" right_data_begin="2" length="1"/>
<range begin="3" left_data_begin="24578" right_data_begin="16385" length="1"/>
<range begin="4" left_data_begin="24579" right_data_begin="4" length="1"/>
</different>
<same>
<range begin="5" data_begin="5" length="1"/>
</same>
<different>
<range begin="6" left_data_begin="24580" right_data_begin="16386" length="1"/>
<range begin="7" left_data_begin="7" right_data_begin="16387" length="1"/>
<range begin="8" left_data_begin="24581" right_data_begin="8" length="1"/>
<range begin="9" left_data_begin="24582" right_data_begin="16388" length="1"/>
<range begin="10" left_data_begin="10" right_data_begin="16389" length="1"/>
<range begin="11" left_data_begin="24583" right_data_begin="11" length="1"/>
</different>
<same>
<range begin="12" data_begin="12" length="1"/>
</same>
<different>
<range begin="13" left_data_begin="24584" right_data_begin="13" length="1"/>
<range begin="14" left_data_begin="24585" right_data_begin="16390" length="1"/>
<range begin="15" left_data_begin="24586" right_data_begin="15" length="1"/>
<range begin="16" left_data_begin="16" right_data_begin="16391" length="1"/>
<range begin="17" left_data_begin="24587" right_data_begin="16392" length="1"/>
<range begin="18" left_data_begin="18" right_data_begin="16393" length="3"/>
<range begin="21" left_data_begin="24588" right_data_begin="21" length="1"/>
</different>
<same>
<range begin="22" data_begin="22" length="1"/>
</same>
<different>
<range begin="23" left_data_begin="24589" right_data_begin="23" length="1"/>
<range begin="24" left_data_begin="24590" right_data_begin="16396" length="1"/>
<range begin="25" left_data_begin="24591" right_data_begin="25" length="1"/>
<range begin="26" left_data_begin="26" right_data_begin="16397" length="1"/>
</different>
<same>
<range begin="27" data_begin="27" length="1"/>
</same>
<different>
<range begin="28" left_data_begin="24592" right_data_begin="28" length="2"/>
<range begin="30" left_data_begin="30" right_data_begin="16398" length="1"/>
</different>
<same>
<range begin="31" data_begin="31" length="1"/>
</same>
<different>
<range begin="32" left_data_begin="24594" right_data_begin="32" length="1"/>
</different>
2014-06-17 14:20:33 +01:00
Joe Thornber
0e62a1c4de
[thin_delta] provide a more complete diff output.
2014-06-17 12:39:13 +01:00
Joe Thornber
f80c2dc77f
[thin_delta] Don't use endl which also flushes
2014-06-16 13:58:25 +01:00
root
72e20c2d40
remove some dead code
2014-06-16 13:41:07 +01:00
Joe Thornber
d7d293ee4f
thin_delta now works
2014-06-10 16:38:20 +01:00
Joe Thornber
d1989f4a14
whitespace
2014-06-10 16:38:10 +01:00
Joe Thornber
e851b35954
[thin_delta] read in the snaps and dev
2014-06-09 13:26:55 +01:00