assert() must not change program behaviour.
It's unlikely that xbps_dictionary_set_cstring() fails, but even
so proplib will report it, so no need to run it via assert().
Any compression format from that list is supported without
additional changes: gzip, bzip2, lz4, xz, zstd.
This is for repository data and binary packages.
Close#122
The character has to be checked for EOF (-1), otherwise with
architectures that use unsigned char by default this breaks at
compile and runtime.
https://github.com/void-linux/xbps/issues/123
xbps_get_pkg_fulldeptree() now returns NULL and sets errno to ENODEV
when there are missing dependencies, rather than assert()ing.
Added another test case to check returned error codes.
Signed-off-by: Juan RP <xtraeme@gmail.com>
This replaces -s,--show-missing. This now prints all processed packages
and outputs in the following format:
pkgname repover srcver
if `repover` or `srcver` can't be known, '?' is print.
Will be used in xbps-src soon. Thanks to @duncaen for ideas.
Signed-off-by: Juan RP <xtraeme@gmail.com>
-i,--ignore-conf-repos has been added.
The previous -i,--installed flag has been renamed to -I.
This breaks compat but we'll need to change buildbot anyway.
Signed-off-by: Juan RP <xtraeme@gmail.com>
See the manual page:
XBPS-DIGEST(1) General Commands Manual XBPS-DIGEST(1)
NAME
xbps-digest - XBPS utility to generate message digests
SYNOPSIS
xbps-digest [OPTIONS] [FILE] [FILE+N]
DESCRIPTION
The xbps-digest utility generates message digests for specified FILE or
stdin if unset.
OPTIONS
-m, --mode mode
Sets the message digest mode. Supported: sha256. If unset, defaults
to sha256.
-h, --help
Show the help message.
-V, --version
Show the version information.
SEE ALSO
xbps.d(5), xbps-checkvers(1), xbps-create(1), xbps-dgraph(1),
xbps-fbulk(1), xbps-install(1), xbps-pkgdb(1), xbps-query(1),
xbps-reconfigure(1), xbps-remove(1), xbps-rindex(1), xbps-uchroot(1),
xbps-uunshare(1)
AUTHORS
Juan Romero Pardines <xtraeme@gmail.com>
BUGS
Probably, but I try to make this not happen. Use it under your own
responsibility and enjoy your life.
Report bugs at https://github.com/void-linux/xbps/issues
June 12, 2019
Signed-off-by: Juan RP <xtraeme@gmail.com>
This now works as expected again, see https://i.imgur.com/pr2XO70.png
for the full dependency graph of the sway pkg installed on my system.
Closes: #80 [via git-merge-pr]
The previous idea was to use virtual packages in the users configuration
to satisfy dependencies by mapping them to existing installed packages.
Using virtual packages for it doesn't work as expected and trying to make
it work would break other functionalities of virtual packages, like the
version satisfaction checks for `provides` and the ability to replace
virtual packages with real packages. The virtual package functionality
should be used exclusively for virtual packages.
This allows users to specify packages packages that should be ignored.
Ignored packages in dependencies are always satisfied without installing
the package, while updating or installing a package that depends on an
ignored package.
This does NOT ignore the shlib checks, ignoring a package that provides
required shared libraries will abort the transaction as if there was no
package that provides the required shared library.
A segfault in xbps-create(1) was found in:
https://github.com/void-linux/void-packages/pull/7524
xbps-create adds a file type string to the xentry for every file it
finds in `destdir`, files other than symlinks, regular files and
directories weren't handled and resulted in a segfault later when
when processing the xentry structures.
This commit adds checks for sockets and fifos and exits with an
appropriate error message or with a generic error message for every
other unhandled file.
Closes#66
EBUSY occurs if xbps tries to remove a directory with unlink(2) that is
a mount point, this happens with `/boot` as example.
https: //github.com/voidlinux/void-packages/issues/7229#issuecomment-319392560
https: //github.com/voidlinux/void-packages/issues/8753
Closes: #259 [via git-merge-pr]
Original message:
```
fetch_cb.c:80:29: error: ‘h’ directive output may be truncated writing 1 byte into a region of size between 0 and 14 [-Werror=format-truncation=]
snprintf(str, sizeof str, "%02ldh%02ldm",
^~~~~~~~~~~~~~
fetch_cb.c:80:29: note: directive argument in the range [0, 59]
fetch_cb.c:80:3: note: ‘snprintf’ output between 7 and 21 bytes into a destination of size 16
snprintf(str, sizeof str, "%02ldh%02ldm",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
eta / 3600, (eta % 3600) / 60);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fetch_cb.c:83:30: error: ‘%02ld’ directive output may be truncated writing between 2 and 19 bytes into a region of size 16 [-Werror=format-truncation=]
snprintf(str, sizeof str, "%02ldm%02lds",
^~~~~
fetch_cb.c:83:29: note: directive argument in the range [-153722867280912930, 60]
snprintf(str, sizeof str, "%02ldm%02lds",
^~~~~~~~~~~~~~
fetch_cb.c:83:29: note: directive argument in the range [-59, 59]
fetch_cb.c:83:3: note: ‘snprintf’ output between 7 and 25 bytes into a destination of size 16
snprintf(str, sizeof str, "%02ldm%02lds",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
eta / 60, eta % 60);
~~~~~~~~~~~~~~~~~~~
fetch_cb.c:80:29: error: ‘h’ directive output may be truncated writing 1 byte into a region of size between 0 and 14 [-Werror=format-truncation=]
snprintf(str, sizeof str, "%02ldh%02ldm",
^~~~~~~~~~~~~~
fetch_cb.c:80:29: note: directive argument in the range [0, 59]
fetch_cb.c:80:3: note: ‘snprintf’ output between 7 and 21 bytes into a destination of size 16
snprintf(str, sizeof str, "%02ldh%02ldm",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
eta / 3600, (eta % 3600) / 60);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
fetch_cb.c:83:30: error: ‘%02ld’ directive output may be truncated writing between 2 and 19 bytes into a region of size 16 [-Werror=format-truncation=]
snprintf(str, sizeof str, "%02ldm%02lds",
^~~~~
fetch_cb.c:83:29: note: directive argument in the range [-153722867280912930, 60]
snprintf(str, sizeof str, "%02ldm%02lds",
^~~~~~~~~~~~~~
fetch_cb.c:83:29: note: directive argument in the range [-59, 59]
fetch_cb.c:83:3: note: ‘snprintf’ output between 7 and 25 bytes into a destination of size 16
snprintf(str, sizeof str, "%02ldm%02lds",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
eta / 60, eta % 60);
~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
```
`xbps-install` will report free space available on disk wording:
> Free space on disk: ...
'free' above is supposed to be an adjective.
But 'free' can also be a verb,
thus the above message can be interpreted as free some space on disk.
'Free' is now changed to 'Available' to avoid ambiguity.
This is the first commit in a series to make xbps-create build
reproducable packages.
xbps-create uses nftw(3) to walk through all files. As nftw doesn't
sort files it may happen that the resulting packages will have
different checksums due to differentiating orders of files on
different filesystems.
To solve this issue xbps-create uses xbps_directory_t, which is always
sorted, instead of a simple linked list.
When adding packages to the index, xbps-rindex will check if the
consistency of shlibs is broken by a package. If so, rindex will create
a stage file and commit the packages there. Once the consistency is restored,
rindex -a will commit the stage area back to the public repo and delete the
stage file.
When adding packages to the index, xbps-rindex will check if the
consistency of shlibs is broken by a package. If so, rindex will create
a stage repository and commit the packages there. Once the consistency
is restored, rindex -a will commit the stage area back to the public
repo and delete the stage file.
Otherwise clang will complain with the following message:
search.c:67:3: error: variable 'i' is incremented both in the loop
header and in the loop body [-Werror,-Wfor-loop-analysis]
The debug printing is also moved after variable substitution.
Now it prints:
foo/template: _var foo
foo/template: pkgname foo
It used to print:
foo/template: _var foo
foo/template: pkgname ${_var}
This is mostly to avoid the allocation required by the externalization of the
transaction dictionary, which in some cases is huge.
This should reduce the massive memory usage required to inspect the externalized
dictionary.
Those are a wrapper around xbps_{array,dictionary}_internalize_from_zfile()
that prints a debugging msg when the plist file cannot be internalized.
Update xbps to use these wrappers.
