Upstream commit:
Date: Wed, 8 Oct 2014 20:09:56 +0800
[EXPAND] Optimise nulonly away and just use quoted as before
This patch makes a small optimisation by using the same value for
quoted between evalvar and varvalue by eliminating nulonly and
passing along quoted instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream patch:
Date: Wed, 8 Oct 2014 15:42:08 +0800
[EXPAND] Do not split quoted VSLENGTH and VSTRIM
Currently VSLENGTH and VSTRIM* are field-split even within quotes.
This is obviously wrong. This patch fixes that.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Wed, 8 Oct 2014 15:24:23 +0800
[EXPAND] Split unquoted $@/$* correctly when IFS is set but empty
Currently we do not field-split $@/$* when it isn't quoted and IFS
is set but empty. This is obviously wrong. This patch fixes this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit 1:
Date: Mon, 6 Oct 2014 20:45:04 +0800
[EVAL] Move common skipcount logic into skiploop
The functions evalloop and evalfor share the logic on checking
and updating skipcount. This patch moves that into the helper
function skiploop.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Upstream commit 2:
Date: Mon, 6 Oct 2014 21:22:43 +0800
[BUILTIN] Allow return in loop conditional to set exit status
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=332954
When return is used in a loop conditional the exit status will
be lost because we always set the exit status at the end of the
loop to that of the last command executed in the body.
This is counterintuitive and contrary to what most other shells do.
This patch fixes this by always preserving the exit status of
return when it is used in a loop conditional.
The patch was originally written by Gerrit Pape <pape@smarden.org>.
Reported-by: Stephane Chazelas <stephane_chazelas@yahoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Partially backported this commit:
Date: Thu, 2 Oct 2014 21:07:55 +0800
[ERROR] Set exitstatus in onint
Currently the exit status when we receive SIGINT is set in evalcommand
which means that it doesn't always get set. For example, if you press
CTRL-C at the prompt of an interactive dash, the exit status is not
set to 130 as it is in many other Bourne shells.
This patch fixes this by moving the setting of the exit status into
onint which also simplifies evalcommand.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The part after "if (evalbltin(cmdentry.u.cmd, argc, argv, flags))"
causes testsuite failures in signal handling, so left unchanged.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue Aug 11 20:56:53 2009 +1000
[EVAL] Revert SKIPEVAL into EXEXIT
Now that eval handles EV_TESTED correctly, we can remove the
SKIPEVAL hack and simply use EXEXIT for set -e.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue Aug 11 20:48:15 2009 +1000
[EVAL] Pass EV_TESTED into evalcmd
This patch fixes the case where the eval command is used with
set -e and as part of a construct that should not cause the
shell to abort, e.g., as part of the condition of an if statement.
This is achieved by propagating the EV_TESTED flag into the
evalstring function through evalcmd. As this alters the prototype
of evalcmd it is now invoked explicitly by evalbltin. The built-in
infrastructure has been changed to accomodate this special case.
In order to ensure that the EXIT trap is properly executed this
patch clears evalskip in exitshell. This wasn't needed before
because of the broken way evalstring worked where it always clears
evalskip when called by minusc.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Although, I failed to create a reproducer for this.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit 1:
Date: Fri, 23 Aug 2013 21:27:42 +1000
[VAR] Initialise OPTIND after importing environment
On Sat, Mar 23, 2013 at 01:46:20AM +0000, Chris F.A. Johnson wrote:
> According to both the dash man page and the POSIX spec, "When the
> shell is invoked, OPTIND is initialized to 1."
>
> However, it actually takes the value of the environment variable
> if it exists:
>
> $ OPTIND=4 dash -c 'echo "$OPTIND"'
> 4
> $ OPTIND=4 bash -c 'echo "$OPTIND"'
> 1
> $ OPTIND=4 ksh -c 'echo "$OPTIND"'
> 1
> $ OPTIND=4 ksh93 -c 'echo "$OPTIND"'
> 1
This patch fixes this by initialising OPTIND after importing the
environment.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Upstream commit 2:
Date: Tue, 7 Oct 2014 22:24:42 +0800
[VAR] Use setvareq to set OPTIND initially
There is no need to setvarint to set the initial value of OPTIND
of one. This patch switchs to setvareq which also lets us avoid
an unnecessary memory allocation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 9 Jul 2011 22:05:22 +0800
[BUILTIN] Merge SKIPFUNC/SKIPFILE and only clear SKIPFUNC when leaving dotcmd
Currently upon leaving a dotcmd the evalskip state is reset so
if a continue/break statement is used within a dot script it would
have no effect outside of the dot script.
This is inconsistent with other shells.
This patch is based on one by Jilles Tjoelker and only clears
SKIPFUNC when leaving a dot script. As a result continue/break
will remain in effect.
It also merges SKIPFUNC/SKIPFILE as they have no practical difference.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 25 Feb 2012 15:35:18 +0800
[VAR] Sanitise environment variable names on entry
On Tue, Feb 14, 2012 at 10:48:48AM +0000, harald@redhat.com wrote:
> "export -p" prints all environment variables, without checking if the
> environment variable is a valid dash variable name.
>
> IMHO, the only valid usecase for "export -p" is to eval the output.
>
> $ eval $(export -p); echo OK
> OK
>
> Without this patch the following test does error out with:
>
> test.py:
> import os
> os.environ["test-test"]="test"
> os.environ["test_test"]="test"
> os.execv("./dash", [ './dash', '-c', 'eval $(export -p); echo OK' ])
>
> $ python test.py
> ./dash: 1: export: test-test: bad variable name
>
> Of course the results can be more evil, if the environment variable
> name is crafted, that it injects valid shell code.
This patch fixes the issue by sanitising all environment variable names
upon entry into the shell.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 8 Jul 2011 16:41:24 +0800
[EVAL] Avoid using undefined handler
* src/eval.c (evalbltin, evalfun): Set savehandler before calling
setjmp with the possible "goto *done", where savehandler is used.
Otherwise, clang warns that "Assigned value is garbage or undefined"
at the point where "savehandler" is used on the RHS.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit 1:
Date: Fri, 8 Jul 2011 16:12:20 +0800
[MEMALLOC] Avoid gcc warning: variable 'oldstackp' set but not used
* src/memalloc.c (growstackblock): Remove declaration and set of
set-but-not-used variable. Also remove a stray space-before-TAB.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Upstream commit 2:
Date: Fri, 8 Jul 2011 16:16:11 +0800
[MEMALLOC] Avoid clang warning about dead store to "size"
* src/memalloc.c (makestrspace): Remove dead store.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Sat Oct 6 00:45:52 2007 +0800
[MEMALLOC] Add pushstackmark
This patch gets rid of the stack mark tracking hack by allocating a little
bit of stack memory if we're at risk of planting a stack mark which may be
grown later. To do this a new function pushstackmark is added which lets
the user pick a bigger amount to allocate since some users do that anyway
after setting a stack mark.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes var_unbackslash1.tests failure.
Upstream commit:
[PARSER] Handle backslash newlines properly after dollar sign
On Tue, Aug 26, 2014 at 12:34:42PM +0000, Eric Blake wrote:
> On 08/26/2014 06:15 AM, Oleg Bulatov wrote:
> > While playing with sh generators I found that dash and bash have different
> > interpretations for <slash><newline> sequence.
> >
> > $ dash -c 'EDIT=xxx; echo $EDIT\
> >> OR'
> > xxxOR
>
> Buggy.
> >
> > $ dash -c 'echo "$\
> > (pwd)"'
> > $(pwd)
> >
> > Is it undefined behaviour in POSIX?
>
> No, it's well-defined, and dash is buggy.
...
I agree. This patch should resolve this problem and similar ones
affecting blackslash newlines after we encounter a dollar sign.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
input: Allow two consecutive calls to pungetc
The commit ef91d3d6a4c39421fd3a391e02cd82f9f3aee4a8 ([PARSER]
Handle backslash newlines properly after dollar sign) created
cases where we make two consecutive calls to pungetc. As we
don't explicitly support that there are corner cases where you
end up with garbage input leading to undefined behaviour.
This patch adds explicit support for two consecutive calls to
pungetc.
Reported-by: Jilles Tjoelker <jilles@stack.nl>
Reported-by: Juergen Daubert <jue@jue.li>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In bbox case, bashism >& may need two pungetc() too.
function old new delta
pgetc 514 555 +41
pushstring 114 144 +30
basepf 52 76 +24
popstring 134 151 +17
parse_command 1584 1585 +1
pungetc 12 9 -3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/1 up/down: 113/-3) Total: 110 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
jobs: Don't attempt to access job table for job %0
If job %0 is (mistakenly) specified, an out-of-bounds access to the
jobtab occurs in function getjob() if num = 0:
jp = jobtab + 0 - 1
Fix this by checking that the job number is larger than 0 before
accessing the jobtab.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
From upstream:
[EVAL] Fix use-after-free in dotrap/evalstring
The function dotrap calls evalstring using the stored trap string.
If evalstring then unsets that exact trap string then we will end
up using freed memory.
This patch fixes it by making evalstring always duplicate the string
before using it.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The original ash defered forking commands in backquotes so builtins
could be run in the same context as the shell. This behavior was
controlled using the EV_BACKCMD to evaltree.
Unfortunately, as Matthias Scheler noticed in 1999 (NetBSD PR/7814),
the result was counterintuitive; for example, echo "`cd /`" would
change the cwd. So ash 0.3.5 left out that optimization.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Backported from dash:
eval: Return status in eval functions
The exit status is currently clobbered too early for case statements
and loops. This patch fixes it by making the eval functions return
the current exit status and setting them in one place -- evaltree.
Harald van Dijk pointed out a number of bugs in the original patch.
function old new delta
evalcommand 1226 1242 +16
cmdloop 383 398 +15
evalfor 223 227 +4
evalcase 271 275 +4
localcmd 348 350 +2
evaltreenr 927 928 +1
evaltree 927 928 +1
evalsubshell 150 151 +1
evalpipe 356 357 +1
parse_command 1585 1584 -1
evalloop 177 164 -13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 9/2 up/down: 45/-14) Total: 31 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Adapted from dash.
The "homegrown" glob code is retained (ifdef'ed out).
This changes was inspired by bug 9261, which detected out-of bounds use of heap
for 2098 byte long name in the "homegrown" code. This is still not fixed...
function old new delta
expandarg 960 982 +22
static.syntax_index_table 26 25 -1
static.spec_symbls 27 26 -1
static.metachars 4 - -4
addfname 42 - -42
msort 126 - -126
expmeta 528 - -528
------------------------------------------------------------------------------
(add/remove: 0/4 grow/shrink: 1/2 up/down: 22/-702) Total: -680 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When "set -e" option is on, shell must exit when any command fails,
including compound commands of the form (compound-list) executed in a
subshell. Bash and dash shells have this behaviour.
Also add a corresponding testcase.
Signed-off-by: Rostislav Skudnov <rostislav@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map"
text data bss dec hex filename
829901 4086 1904 835891 cc133 busybox_before
829665 4086 1904 835655 cc047 busybox
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bash doesn't expand its $'...' construct in double quotes:
$ echo "$'a\tb'"
$'a\tb'
Change BusyBox ash to do the same. This also fixes a problem with
here documents where BusyBox ash gave an incorrect result for:
$ cat <<EOF
> '$'
> EOF
'$'
Reported-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As reported in bug 8506:
$ X=abcdÉfghÍjklmnÓpqrstÚvwcyz
$ echo ${#X}
abcd26
The result should be 26.
This regression was introduced by:
<d68d1fb> 2015-05-18 [Ron Yorston] ash: code shrink around varvalue
The length in characters was being used to discard the contents of
the variable instead of the length in bytes.
URL: https://bugs.busybox.net/8506
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This patch fixes compiling busybox with FEATURE_UTMP and _WTMP enabled.
musl, while not really support utmp/wtmp, provides stub functions, as well
as variables such as _PATH_UTMP, so that programs using utmp or wtmp can
still compile fine.
My reasoning for this patch is that on Exherbo, I'm currently trying to get
us to be able to use the same busybox config file for both glibc and musl
systems, using utmp/wtmp on systems that support it, and using the stubs
on musl without needing two different configs.
As of latest musl git, it provides all utmp functions needed; 1.1.12 doesn't,
but I sent a patch to Rich to add the utmp{,x}name functions expected to
exist, which was merged into musl upstream.
Signed-off-by: Kylie McClain <somasissounds@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Reported by gcc (Debian 5.3.1-4) 5.3.1 20151219
shell/ash.c: In function 'evaltree':
shell/ash.c:8432:19: warning: logical not is only applied to the left hand side of comparison
Signed-off-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Where the POSIX shell allows functions to be defined as:
name () compound-command [ redirections ]
bash adds the alternative syntax:
function name [()] compound-command [ redirections ]
Implement this in ash's bash compatibility mode. Most compound
commands work (for/while/until/if/case/[[]]/{}); one exception is:
function f (echo "no way!")
The other two variants work:
f() (echo "ok")
function f() (echo "also ok")
function old new delta
parse_command 1555 1744 +189
tokname_array 232 240 +8
.rodata 155612 155566 -46
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 197/-46) Total: 151 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If /tmp/test.sh is a script that tries to run a second script which
happens to be non-executable this:
command . /tmp/test.sh
causes a seg fault.
This is because clearredir is called in the error path to clear the
stack of redirections. The normal path then calls popredir, but popredir
fails when the stack is empty.
Reported-by: Bastian Bittorf <bittorf@bluebottle.com>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
evalcommand always clobbers the exit status in case of an EXEXEC
which means that exec always fails with exit status 2 regardless
of what it actually returns.
This patch adds the missing check for EXEXEC so that the correct
exit status is preserved. It causes the test ash-misc/exec.tests
to succeed.
Based on commit 7f68426 in dash git, by Herbert Xu.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Processing of here documents in ash has had a couple of breakages
which are now the subject of tests. This commit should fix both.
It is based on the following commit in dash git by Herbert Xu:
<7c245aa> [PARSER] Simplify EOF/newline handling in list parser
(See git://git.kernel.org/pub/scm/utils/dash/dash.git)
Reported-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This reverts commit 7e66102f76 but
leaves the test in place as it's still valid.
Reported-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Save the value of the checkkwd flag to prevent it being clobbered
during recursion.
Based on commit ec2c84d from git://git.kernel.org/pub/scm/utils/dash/dash.git
by Herbert Xu.
function old new delta
readtoken 190 203 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 13/0) Total: 13 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The command builtin should only check the default path, not $PATH,
when the -p flag is used along with -v/-V.
Based on commits 65ae84b (by Harald van Dijk) and 29ee27d (by Herbert
Xu) from git://git.kernel.org/pub/scm/utils/dash/dash.git).
function old new delta
commandcmd 72 87 +15
describe_command 437 450 +13
typecmd 84 86 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 30/0) Total: 30 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
busybox sh -c 'command --' segfaults because parse_command_args
returns a pointer to a null pointer.
Based on commit 18071c7 from git://git.kernel.org/pub/scm/utils/dash/dash.git
by Gerrit Pape.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
