Upstream commit:
Date: Tue, 2 Jun 2020 23:46:48 +1000
jobs: Fix waitcmd busy loop
We need to clear gotsigchld in waitproc because it is used as
a loop conditional for the waitcmd case. Without it waitcmd
may busy loop after a SIGCHLD.
This patch also changes gotsigchld into a volatile sig_atomic_t
to prevent compilers from optimising its accesses away.
Fixes: 6c691b3e5099 ("jobs: Only clear gotsigchld when waiting...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This change also incorporates other changes to bring us closer to upstream.
function old new delta
dowait 553 636 +83
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 10 Apr 2020 21:03:09 +1000
jobs: Fix infinite loop in waitproc
After we changed the resetting of gotsigchld so that it is only
done if jp is NULL, we can now get an infinite loop in waitproc
if gotsigchld is set but there is no outstanding child because
everything had been waited for previously without gotsigchld being
zeroed.
This patch fixes it by always zeroing gotsigchld as we did before.
The bug that the previous patch was trying to fix is now resolved
by switching the blocking mode to DOWAIT_NORMAL after the specified
job has been completed so that we really do wait for all outstanding
dead children.
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Fixes: 6c691b3e5099 ("jobs: Only clear gotsigchld when waiting...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
dowait 553 631 +78
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream tried it, and then reverted by:
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue, 26 May 2020 23:19:05 +1000
parser: Fix double-backslash nl in old-style command sub
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With bash's read builtin it is possible to read from a file (e.g.
device-tree) until the first '\0' character:
IFS= read -r -d '' VARIABLE < file
In busybox ash the -d extension is also implemented, but checking the
read character for '\0' has to be performed after comparing with the
delimiter.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
show_history() checks that its argument in non-null so there's
no need to repeat the test at call sites.
function old new delta
historycmd 25 17 -8
builtin_history 29 21 -8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-16) Total: -16 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since commit 7eb8eecbb (ash: eval: Add assignment built-in support
again) building BusyBox with the 'command' built-in disabled fails.
parse_command_args() only needs to be called when the 'command'
built-in is run. Which it won't be if it's disabled.
v2: Avoiding infinite loops is good, too. Thanks, Harald van Dijk.
Reported-by: Deweloper <deweloper@wp.pl>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Wed, 12 Sep 2018 14:27:16 +0800
expand: Fix multiple issues with EXP_DISCARD in evalvar
The commit 3cd538634f71538370f5af239f342aec48b7470b broke parameter
expansion in multiple ways because the EXP_DISCARD flag wasn't set
or tested for various cases:
$ src/dash -c 'var=; echo ${var:+nonempty}'
nonempty
$ src/dash -u -c 'unset foo bar; echo ${foo+${bar}}'
dash: 1: bar: parameter not set
$ src/dash -c 'foo=bar; echo ${foo=BUG}; echo $foo'
barBUG
bar
$
This patch fixes them by introducing a new discard variable that
tracks whether the extra word should be discarded or not when it
is parsed.
Reported-by: Martijn Dekker <martijn@inlv.org>
Fixes: 3cd538634f71 ("expand: Do not reprocess data when...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream patch:
Date: Wed, 30 May 2018 02:06:03 +0800
expand: Do not reprocess data when expanding words
Currently various paths will reprocess data when performing word
expansion. For example, expari will skip backwards looking for
the start of the arithmetic expansion, while evalvar will skip
unexpanded words manually.
This is cumbersome and error-prone. This patch fixes this by
making word expansions proceed in a linear fashion. This means
changing argstr and the various expansion functions such as expari
and subevalvar to return the next character to be expanded.
This is inspired by similar code from FreeBSD. However, we take
things one step further and completely remove the manual word
skipping in evalvar. This is accomplished by introducing a new
EXP_DISCARD flag that tells argstr to only parse and not produce
any actual expansions.
Incidentally, argstr will now always NUL-terminate the expansion
unless the EXP_WORD flag is set. This is because all but one
caller of argstr wants the result to be NUL-termianted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Also includes two one-line follow-up fixes:
expand: Eat closing brace for length parameter
if (subtype == VSLENGTH) {
+ p++;
if (flag & EXP_DISCARD)
expand: Fix double-decrement in argstr
- newloc = expdest - (char *)stackblock() - end;
+ newloc = q - (char *)stackblock() - end;
and changes in code for bash substring extensions.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Following recent work on evalcommand() a TRACE statement to report
the status of a forked command was left in the wrong place.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sun, 11 Nov 2007 15:27:00 +0800
Expand here-documents in the current shell environment
Previously we always expanded here-documents in a subshell. This is
contrary to the POSIX specification and how other shells behave. What's
more this slows down many expansions due to the extra fork (however, it
must be said that it is possible for it speed up certain expansions by
running it simultaneously with the command on two CPUs).
This patch move the expansion into the current shell environment.
Test case:
unset a
cat <<- EOF > /dev/null
${a=NOT}
EOF
echo ${a}BAD
Old result:
BAD
New result:
NOTBAD
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 19 Nov 2018 18:43:58 +0800
parser: Do not push token back before parseheredoc
When we read the first token in list() we use peektoken instead
of readtoken as the following code needs to use the same token
again. However, this is wrong when we're in a here-document as
it will clobber the saved token without resetting the tokpushback
flag.
This patch fixes it by doing the tokpushback after parseheredoc
and setting lasttoken again if parseheredoc was called.
Reported-by: Ron Yorston <rmy@frippery.org>
Fixes: 7c245aa8ed33 ("[PARSER] Simplify EOF/newline handling in...")
Fixes: ee5cbe9fd6bc ("[SHELL] Optimize dash -c "command" to avoid a fork")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 29 Mar 2019 13:49:59 +0800
parser: Fix old-style command substitution here-document crash
... This is caused by the recent change to
save/restore here-docment list around command substitutions. In
doing so we must finish existing here-documents prior to restoring
the old here-document list. This is done for new-style command
substitutions but not for old-style.
This patch fixes it by doing it for both.
Fixes: 51e2d88d6e51 ("parser: Save/restore here-documents in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 1 Jun 2018 18:25:29 +0800
expand: Ensure result is escaped in cvtnum
The minus sign generated from arithmetic expansion is currently
unquoted which causes anomalies when the result is used in where
the quoting matters.
This patch fixes it by explicitly calling memtodest on the result
in cvtnum.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 31 May 2018 01:51:48 +0800
memalloc: Avoid looping in growstackto
Currently growstackto will repeatedly call growstackblock until
the requisite size is obtained. This is wasteful. This patch
changes growstackblock to take a minimum size instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 14 Dec 2018 13:52:02 +0800
eval: Only restore exit status on exit/return
We unconditionally restore the saved status in exitreset, which
is incorrect as we only want to do it for exitcmd and returncmd.
This patch fixes the problem by introducing EXEND.
Reported-by: Martijn Dekker <martijn@inlv.org>
Fixes: da30b4b78769 ("[BUILTIN] Exit without arguments in a trap...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes exitcode_trap4.tests.
Upstream commit:
Date: Mon, 6 Oct 2014 21:51:26 +0800
Return without arguments in a trap should use status outside traps
POSIX now requires that return without arguments in a trap should
return the last command status prior to executing traps. This
patch implements this behaviour.
Incidentally this also changes the behaviour of return without
arguments in a loop conditional to use the last exit status in
the body as opposed to the last command in the conditional when
there is one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since commit d81af7216 (ash: eval: Reap zombies after built-in commands
and functions) if the shell is compiled with SH_STANDALONE and SH_NOFORK
enabled nofork applets potentially return the incorrect status.
The status value returned by evalcommand() in this case is obtained from
exitstatus in a call to waitforjob(NULL). This overwrites the status
set for nonfork applets.
If this commit seems familiar it's essentially a reversion of commit
5ccb0e92fa (ash: return exit status of nofork applets). What was correct
in 2016 is wrong in 2020 and vice versa.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 28 May 2018 00:17:39 +0800
expand: Merge syntax/quotes in memtodest with flags
The function arguments syntax and quotes are both derived from
the expansion flags. As syntax is only used by memtodest we do
not need to maintain it outside of the function at all.
The only place that uses something other than BASESYNTAX or DQSYNTAX
is exptilde. However in that case DQSYNTAX has exactly the same
effect as SQSYNTAX.
This patch merges these two arguments into a single flags. The
macro QUOTES_KEEPNUL has been renamed to EXP_KEEPNUL in order
to keep the namespace separate.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 31 May 2018 01:15:34 +0800
eval: Always set localvar_stop
The variable localvar_stop is set iff vlocal is true. gcc doesn't
get this so we get a spurious warning.
This patch fixes this by always calling pushlocalvars with vlocal
and making it only actually do the push if vlocal is non-zero.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:55 +0800
eval: Replace with listsetvar with mklocal/setvareq
This patch replaces listsetvar with mklocal/setvareq. As we now
determine special built-in status prior to variable assignment, we
no longer have to do a second pass listsetvar. Instead we will
call setvareq directly instead of mklocal when necessary.
In order to do this mklocal can now take a flag in order to mark
a variable for export.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:54 +0800
eval: Fail immediately with redirections errors for simple command
Previously, dash would continue to perform variable expansions
even if a redirection error occured. This patch changes it so
that it fails immediately.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:52 +0800
eval: Add assignment built-in support again
This patch adds assignment built-in support that used to exist
in dash prior to 0.3.8-15. This is because it will soon be part
of POSIX, and the semantics are now much better defined.
Recognition is done at execution time, so even "command -- export"
or "var=export; command $var" should work.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:41 +0800
jobs: Only clear gotsigchld when waiting for everything
The gotsigchld flag is always cleared in dowait but not all callers
of dowait will wait for everything. In particular, when jp is set
we only wait until the set job isn't running anymore.
This patch fixes this by only clearing gotsigchld if jp is unset.
It also changes the waitcmd to actually set jp which corresponds
to the behaviour of bash/ksh93/mksh.
The only other caller of dowait that doesn't wait for everything
is the jobless reaper. This is in fact redundant now that we wait
after every simple command. This patch removes it.
Finally as every caller of dowait needs to wait until either the
given job is not running, or until all terminated jobs have been
processed, this patch moves the loop into dowait itself.
Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Mon, 7 May 2018 00:40:34 +0800
jobs - Do not block when waiting on SIGCHLD
Because of the nature of SIGCHLD, the process may have already been
waited on and therefore we must be prepared for the case that wait
may block. So ensure that it doesn't by using WNOHANG.
Furthermore, multiple jobs may have exited when gotsigchld is set.
Therefore we need to wait until there are no zombies left.
Lastly, waitforjob needs to be called with interrupts off and
the original patch broke that.
Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While at it, removed INT_ON/OFF in waitforjob() - it must be called
from INT_OFF region anyway.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 26 Mar 2018 23:55:50 +0800
eval: Reap zombies after built-in commands and functions
Currently dash does not reap dead children after built-in commands
or functions. This means that if you construct a loop consisting
of solely built-in commands and functions, then zombies can hang
around indefinitely.
This patch fixes this by reaping when necessary after each built-in
command and function.
Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:51 +0800
exec: Never rehash regular built-ins
As regular (including special) built-ins can never be overridden,
we should never remove them from the hash table.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Sat, 19 May 2018 02:39:50 +0800
exec: Stricter pathopt parsing
This patch changes the parsing of pathopt. First of all only
%builtin and %func (with arbitrary suffixes) will be recognised.
Any other pathopt will be treated as a normal directory.
Furthermore, pathopt can now be specified before the directory,
rather than after it. In fact, a future version may remove support
for pathopt suffixes.
Wherever the pathopt is placed, an optional % may be placed after
it to terminate the pathopt.
This is so that it is less likely that a genuine directory containing
a % sign is parsed as a pathopt.
Users of padvance outside of exec.c have also been modified:
1) cd(1) will always treat % characters as part of the path.
2) chkmail will continue to accept arbitrary pathopt.
3) find_dot_file will ignore the %builtin pathopt instead of trying
to do a stat in the accompanying directory (which is usually the
current directory).
The patch also removes the clearcmdentry optimisation where we
attempt to only partially flush the table where possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:48 +0800
exec: Do not allocate stack string in padvance
Many callers of padvance immediately free the allocated string
so this patch moves the stalloc call to the caller. Instead of
returning the allocated string, padvance now returns the length
to allocate (this may be longer than the actual string length,
even including the NUL). For the case where we would previously
return NULL, we now return -1.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:46 +0800
memalloc: Add growstackto helper
This patch adds the growstackto helper which repeatedly calls
growstackblock until the requested size is reached.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Sat, 19 May 2018 02:39:42 +0800
parser: Save/restore here-documents in command substitution
This patch changes the parsing of here-documents within command
substitution, both old style and new style. In particular, the
original here-document list is saved upon the beginning of parsing
command substitution and restored when exiting.
This means that here-documents outside of command substitution
can no longer be filled by text within it and vice-versa.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:40 +0800
mkinit: Split reset into exitreset and reset
Previously reset was called after exitshell. This was changed
so that it was called before exitshell because certain state needed
to be reset in order for the EXIT trap to work.
However, this caused issues because certain other states (such
as local variables) should not be reset. This patch fixes this
by creating a new function exitreset that is called prior to
exitshell and moving reset back to its original location.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 29 Apr 2019 19:13:37 +0500
expand: Fix trailing newlines processing in backquote expanding
According to POSIX.1-2008 we should remove newlines only at the end of
the substitution. Newlines-only substitions causes dash to remove
newlines before beggining of the substitution. The following code:
cat <<END
1
$(echo "")
2
END
prints "1<newline>2" instead of expected "1<newline><newline>2".
This patch fixes trailing newlines processing in backquote expanding.
Signed-off-by: Nikolai Merinov <n.merinov@inango-systems.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 27 May 2019 13:39:37 +0800
parser: Only accept single-digit parameter expansion outside of braces
This patch should fix the problem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 15 Dec 2018 18:49:31 +0100
shell: Fix clang warnings about "string plus integer"
Building with clang results in some warnings about integer values being
added to strings.
While the code itself is fine and the warnings are indeed harmless,
fixing them also makes the semantic more explicit: what it is actually
being increased is the address which points to the start of the string
in order to skip the initial character when some conditions are met.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Mon, 19 Nov 2018 18:00:32 +0800
eval: Use the correct expansion mode for fd redirection
It has been reported that
echo test >&$EMPTY_VARIABLE
causes dash to segfault. This is a symptom of the bigger problem
that dash tries to perform pathname expansion as well as field
splitting on the word after >& and <&. This is wrong and this
patch fixes it to use the same expansions as done on a normal
redirection.
Reported-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 28 May 2018 17:09:48 +0800
expand: Fix skipping of command substitution when trimming in evalvar
When we are trimming an unset variable in evalvar, any embedded
command substitution that should have been skipped are not. This
can cause them to be evaluated later should there be other command
substitutions in the same input word.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Fri, 7 Sep 2018 10:34:14 +0200
main: Print \n upon EOF (CTRL-D) when run interactively
Exiting dash via a ^D instead of with "exit" causes dash to forget to
print a newline.
sh-3.1$ sh
sh-3.1$ ^D
sh-3.1$ dash
$ sh-3.1$
It is more neat and tidy to send a newline similarly to what bash does,
so it doesn't make the next prompt of the parent shell look ugly.
Suggested by jidanni.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
[reworded the patch description]
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Bug-Debian: http://bugs.debian.org/476422
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sun, 27 May 2018 17:31:57 +0800
expand: Use HOME in tilde expansion when it is empty
Currently if HOME is set to empty tilde expansion will fail, i.e.,
it will remain as a literal tilde. This patch changes it to
return the empty string as required by POSIX.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:49 +0800
builtin: Mark more regular built-ins
This patch marks the following built-ins as regular, meaning that
they cannot be overriden using PATH search:
hash
pwd
type
ulimit
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:45 +0800
jobs: Replace some uses of fmtstr with stpcpy/stpncpy
Some uses of fmtstr, particularly the ones without a format string,
can be replaced with stpcpy or stpncpy. This patch does that so
we don't have to introduce unnecessary format strings in order to
silence compiler warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:44 +0800
output: Fix fmtstr return value
The function fmtstr is meant to return the actual length of output
produced, rather than the untruncated length.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:38 +0800
main: Only set savestatus in exitcmd
Currently exitcmd sets exitstatus and then savestatus if the latter
was previously set. In fact, as exitcmd always raises an exception
and will either end up in the setjmp call in main() or exitshell(),
where exitstatus is always replaced by savestatus if set, we only
need to set savestatus.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon Oct 6 10:39:47 2014 +0800
[BUILTIN] Exit without arguments in a trap should use status outside traps
POSIX now requires that exit without arguments in a trap should
return the last command status prior to executing traps. This
patch implements this behaviour.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Keeping up with upstream (in our case, 'before patch' code is not buggy).
Upstream commit:
Date: Fri, 11 May 2018 23:41:25 +0800
parser: Fix incorrect eating of backslash newlines
With the introduction of synstack->syntax, a number of references
to the syntax variable was missed during the conversion. This
causes backslash newlines to be incorrectly removed in single
quote context.
This patch also combines these calls into a new helper function
pgetc_top.
Fixes: ab1cecb40478 ("parser: Add syntax stack for recursive...")
Reported-by: Leah Neukirchen <leah@vuxu.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Adding previously skipped "readtoken1(pgetc_eatbnl(), DQSYNTAX..." changes
from upstream commit:
Date: Thu Mar 8 08:37:11 2018 +0100
Author: Harald van Dijk <harald@gigawatt.nl>
parser: use pgetc_eatbnl() in more places
dash has a pgetc_eatbnl function in parser.c which skips any
backslash-newline combinations. It's not used everywhere it could be.
There is also some duplicated backslash-newline handling elsewhere in
parser.c. Replace most of the calls to pgetc() with calls to
pgetc_eatbnl() and remove the duplicated backslash-newline handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The dash maintainer recently posted a fix for issues with expanding
PS1. These had already been fixed differently in BusyBox ash. Borrow
a couple of improvements:
- Use a single call to setjmp() to trap errors in both readtoken1()
and expandarg().
- In case of error set the prompt to the literal value of PS1 rather
than the half-digested nonsense in stackblock() which might include
ugly control characters.
function old new delta
expandstr 353 300 -53
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit d1a2fa2a4 (ash: catch error in arithmetic expansion in PS1)
catches all exceptions raised by expandarg(). Some exceptions, such as
the EXEXIT raised when command expansion is used, are expected:
export PS1='$(echo "$ ")'
These should be processed normally or the shell hangs at the prompt.
function old new delta
expandstr 344 353 +9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 9/0) Total: 9 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"env - hush SCRIPT" invocation (that is, with empty environment)
should not show PS1/2 in "set" output.
function old new delta
hush_main 1070 1075 +5
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Assignments / exports / unsets of variables are far more frequent than
prompt printing, and if we show prompt, we are likely to be limited by
user typing speed - do not optimize for that scenario.
Just re-query $PS1 / $PS2 values when need to show the prompt.
function old new delta
fgetc_interactive 236 259 +23
set_vars_and_save_old 150 147 -3
pseudo_exec_argv 597 594 -3
hush_main 1110 1105 -5
enter_var_nest_level 38 32 -6
builtin_local 56 50 -6
run_pipe 1857 1834 -23
leave_var_nest_level 127 98 -29
handle_changed_special_names 111 79 -32
cmdedit_update_prompt 57 - -57
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/8 up/down: 23/-164) Total: -141 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Setting PS1 to:
PS1='$((123+))'
causes the shell to enter an infinite error loop:
sh: arithmetic syntax error
Catch any exception raised by expandarg() in expandstr() and allow
processing to continue.
function old new delta
expandstr 262 344 +82
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 82/0) Total: 82 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Setting PS1 to:
PS1='`xxx(`'
causes the shell to terminate with the error:
sh: syntax error: unexpected end of file (expecting ")")
This happens because old-style backquotes require the input to be reread
and thus call setinputstring() a second time. Prevent the problem by
unwinding all recently opened files in expandstr().
function old new delta
unwindfiles - 22 +22
expandstr 247 262 +15
forkchild 631 625 -6
evalcommand 1694 1685 -9
ash_main 1346 1336 -10
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/3 up/down: 37/-25) Total: 12 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bash 5.0 added the dynamic variable EPOCHSECONDS and EPOCHREALTIME
which return the number of seconds since the Unix Epoch as an
integer or float. These are useful for logging or tracing.
function old new delta
change_epoch - 78 +78
.rodata 175167 175235 +68
varinit_data 264 312 +48
change_seconds - 24 +24
change_realtime - 24 +24
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/0 up/down: 242/0) Total: 242 bytes
text data bss dec hex filename
938508 4203 1888 944599 e69d7 busybox_old
938702 4203 1888 944793 e6a99 busybox_unstripped
v2: Cast tv_sec and tv_usec to unsigned quantities.
Add brackets to macros.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit b28d4c346 (ash: [VAR] Move unsetvar functionality into setvareq)
dropped the code that caused dynamic variables to lose their special
properties when unset. Add it back again.
function old new delta
setvareq 346 360 +14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 14/0) Total: 14 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bash 5.0 added the dynamic variable EPOCHSECONDS and EPOCHREALTIME
which return the number of seconds since the Unix Epoch as an
integer or float. These are useful for logging or tracing.
function old new delta
get_local_var_value 207 302 +95
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 95/0) Total: 95 bytes
text data bss dec hex filename
938702 4203 1888 944793 e6a99 busybox_old
938797 4203 1888 944888 e6af8 busybox_unstripped
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add a specific define to indicate which bash compatibility code
implements 'wait -n'.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The following constructs result in ever-increasing memory usage:
while true; do { true; } </dev/null; done
while true; do ( true; ) </dev/null; done
For comparison, bash displays static memory usage in both cases.
This has been fixed in dash by commit 2bc6caa. The maintainer
writes:
I have simplified evaltree so that it simply sets the stack mark
unconditionally. This allows us to remove the stack marks in the
functions called by evaltree.
Closes BusyBox bug 7748.
function old new delta
evaltree 606 632 +26
evalcommand 1724 1696 -28
evalcase 382 351 -31
evalfor 230 196 -34
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 26/-93) Total: -67 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Embedded scripts require a shell to be present in the BusyBox
binary. Allow either ash or hush to be used for this purpose.
If both are enabled ash takes precedence.
The size of the binary is unchanged in the default configuration:
both ash and hush are present but support for embedded scripts
isn't compiled into hush.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The parser reads from an already freed memory location, thereby causing
unpredictable results, in the following situation:
- ENABLE_ASH_EXPAND_PRMT is enabled
- heredoc is being parsed
- command substitution is used within heredoc
Examples where this bug crops up are (PS2 is set to "> "):
$ cat <<EOF
> `echo abc`
> EOF
-sh: O: not found
$ cat <<EOF
> $(echo abc)
> EOF
-sh: {garbage}: not found
The presumable reason is that setprompt_if() causes a nested expansion when
ENABLE_ASH_EXPAND_PRMT is enabled, therefore leaving "wordtext" in an unusable
state. However, when parseheredoc() is called, "tokpushback" is non-zero, which
causes the next call to xxreadtoken() to return TWORD, causing the caller to
use the invalid "wordtoken" instead of reading the next valid token.
The call chain is:
list()
-> peektoken() [sets tokpushback to 1]
-> parseheredoc()
-> setprompt_if()
-> pushstackmark()
-> expandstr()
-> readtoken1()
[sets lasttoken to TWORD, wordtoken points to expanded prompt]
-> popstackmark() [invalidates wordtoken, leaves lasttoken as is]
-> readtoken1()
-> ...parsebackq
-> list()
-> andor()
-> pipeline()
-> readtoken()
-> xxreadtoken()
[tokpushback non-zero, reuse lasttoken and wordtext]
Note that in almost all other contexts, each call to setprompt_if() is preceded
by setting "tokpushback" to zero. One exception is "oldstyle" backquote parsing
in readtoken1(), but there "tokpushback" is reset afterwards. The other
exception is nlprompt(), but this function is only used within readtoken1()
(but in contexts where no nested calls to xxreadtoken() occur) and xxreadtoken()
(where "tokpushback" is guaranteed to be zero).
function old new delta
parseheredoc 124 131 +7
Signed-off-by: Christoph Schulz <develop@kristov.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
BusyBox has support for embedded shell scripts. Two types can be
distinguished: custom scripts and scripts implementing applets.
Custom scripts should be placed in the 'embed' directory at build
time. They are given a default applet configuration and appear
as applets to the user but no further configuration is possible.
Applet scripts are integrated with the BusyBox build system and
are intended to be used to ship standard applets that just happen
to be implemented as scripts. They can be configured at build time
and appear just like native applets.
Such scripts should be placed in the 'applets_sh' directory. A stub
C program should be written to provide the usual applet configuration
details and placed in a suitable subsystem directory. It may be
helpful to have a configuration option to enable any dependencies the
script requires: see the 'nologin' applet for an example.
function old new delta
scripted_main - 41 +41
applet_names 2773 2781 +8
applet_main 1600 1604 +4
i2cdetect_main 672 674 +2
applet_suid 100 101 +1
applet_install_loc 200 201 +1
applet_flags 100 101 +1
packed_usage 33180 33179 -1
tryexec 159 152 -7
evalcommand 1661 1653 -8
script_names 9 - -9
packed_scripts 123 114 -9
complete_cmd_dir_file 826 811 -15
shellexec 271 254 -17
find_command 1007 990 -17
busybox_main 642 624 -18
run_applet_and_exit 100 78 -22
find_script_by_name 51 - -51
------------------------------------------------------------------------------
(add/remove: 1/2 grow/shrink: 6/9 up/down: 58/-174) Total: -116 bytes
text data bss dec hex filename
950034 477 7296 957807 e9d6f busybox_old
949918 477 7296 957691 e9cfb busybox_unstripped
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When a variable is unset by calling setvar(name, NULL, 0) the code
to initialise the new, empty variable fails to initialise the last
character of the string.
Attempts to read the contents of the unset variable will result
in the uninitialised character at the end of the string being
accessed.
For example, running BusyBox under Valgrind and unsetting PATH:
$ valgrind ./busybox_unstripped sh
==21249== Memcheck, a memory error detector
==21249== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==21249== Using Valgrind-3.14.0 and LibVEX; rerun with -h for copyright info
==21249== Command: ./busybox_unstripped sh
==21249==
/data2/git/build_fix_8721 $ unset PATH
/data2/git/build_fix_8721 $ 0
==21249== Conditional jump or move depends on uninitialised value(s)
==21249== at 0x451371: path_advance (ash.c:2555)
==21249== by 0x456E22: find_command (ash.c:13407)
==21249== by 0x458425: evalcommand (ash.c:10139)
==21249== by 0x454CBC: evaltree (ash.c:9131)
==21249== by 0x456C80: cmdloop (ash.c:13164)
Closes https://bugs.busybox.net/show_bug.cgi?id=8721
v2: On the dash mailing list Harald van Dijk was kind enough to point
out a flaw in my reasoning and provide an alternative patch. Sadly
his patch adds 2 bytes of bloat. Using xzalloc to zero the whole
string gives a bloat of -3 bytes.
function old new delta
setvar 172 169 -3
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The HUSH_TICK configuration option enables command substitution,
not process substitution.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ensure that login_sh is initialised in procargs even when running
an embedded script.
The argc argument to ash_main isn't unused when embedded scripts
are present.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
To assist in the deployment of shell scripts it may be convenient
to embed them in the BusyBox binary.
'Embed scripts in the binary' takes any files in the directory
'embed', concatenates them with null separators, compresses them
and embeds them in the binary.
When scripts are embedded in the binary, scripts can be run as
'busybox SCRIPT [ARGS]' or by usual (sym)link mechanism.
embed/nologin is provided as an example.
function old new delta
packed_scripts - 123 +123
unpack_scripts - 87 +87
ash_main 1103 1171 +68
run_applet_and_exit 78 128 +50
get_script_content - 32 +32
script_names - 10 +10
expmeta 663 659 -4
------------------------------------------------------------------------------
(add/remove: 4/0 grow/shrink: 2/1 up/down: 370/-4) Total: 366 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Wed, 28 Mar 2018 18:37:51 +0800
expand: Do not quote backslashes in unquoted parameter expansion
Here is a better example:
a="/*/\nullx" b="/*/\null"; printf "%s\n" $a $b
dash currently prints
/*/\nullx
/*/\null
bash prints
/*/\nullx
/dev/null
You may argue the bash behaviour is inconsistent but it actually
makes sense. What happens is that quote removal only applies to
the original token as seen by the shell. It is never applied to
the result of parameter expansion.
Now you may ask why on earth does the second line say "/dev/null"
instead of "/dev/\null". Well that's because it is not the quote
removal step that removed the backslash, but the pathname expansion.
The fact that the /de\v does not become /dev even though it exists
is just the result of the optimisation to avoid unnecessarily
calling stat(2). I have checked POSIX and I don't see anything
that forbids this behaviour.
So going back to dash yes I think we should adopt the bash behaviour
for pathname expansion and keep the existing case semantics.
This patch does exactly that. Note that this patch does not work
unless you have already applied
https://patchwork.kernel.org/patch/10306507/
because otherwise the optimisation mentioned above does not get
detected correctly and we will end up doing quote removal twice.
This patch also updates expmeta to handle naked backslashes at
the end of the pattern which is now possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
expmeta 618 653 +35
memtodest 146 147 +1
Tested to work with both ASH_INTERNAL_GLOB on and off.
hush does not handle this correctly.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:37 +0800
exec: Return 126 on most errors in shellexec
Currently when shellexec fails on most errors the shell will exit
with exit status 2. This patch changes it to 126 in order to avoid
ambiguities with the exit status from a successful exec.
The errors that result in 127 has also been expanded to include
ENOTDIR, ENAMETOOLONG and ELOOP.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
shellexec 245 254 +9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue, 27 Mar 2018 00:39:35 +0800
eval: Restore input files in evalcommand
When evalcommand invokes a command that modifies parsefile and
then bails out without popping the file, we need to ensure the
input file is restored so that the shell can continue to execute.
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
unwindfiles - 20 +20
evalcommand 1635 1653 +18
getoptscmd 584 595 +11
popallfiles 20 10 -10
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/1 up/down: 49/-10) Total: 39 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue, 3 Apr 2018 00:40:25 +0800
parser: Fix parsing of ${}
dash -c 'echo ${}' should print "Bad subtitution" but instead
fails with "Syntax error: Missing '}'". This is caused by us
reading an extra character beyond the right brace. This patch
fixes it so that this construct only fails during expansion rather
than during parsing.
Fixes: 3df3edd13389 ("[PARSER] Report substition errors at...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
readtoken1 2907 2916 +9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 23 Mar 2018 18:58:47 +0800
expand: Fix ghost fields with unquoted $@/$*
You're right. The proper fix to this is to ensure that nulonly
is not set in varvalue for $*. It should only be set for $@ when
it's inside double quotes.
In fact there is another bug while we're playing with $@/$*.
When IFS is set to a non-whitespace character such as :, $*
outside quotes won't remove empty fields as it should.
This patch fixes both problems.
Reported-by: Martijn Dekker <martijn@inlv.org>
Suggested-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
argstr 1111 1113 +2
evalvar 571 569 -2
varvalue 579 576 -3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 2/-5) Total: -3 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:43 +0800
var: Set IFS to fixed value at start time
This patch forces the IFS variable to always be set to its default
value, regardless of the environment.
It also removes the long unused IFS_BROKEN code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Wed, 4 Apr 2018 17:54:01 +0800
eval: Variable assignments on functions are no longer persistent
Dirk Fieldhouse <fieldhouse@gmx.net> wrote:
> In POSIX.1-2017 ("simultaneously IEEE Std 1003.1™-2017 and The Open
> Group Technical Standard Base Specifications, Issue 7")
> <http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_09>,
> we read under '2.9.1 Simple Commands'
>
> "Variable assignments shall be performed as follows:
> ...
> - If the command name is a standard utility implemented as a function
> (see XBD Utility), the effect of variable assignments shall be as if the
> utility was not implemented as a function.
> ...
> - If the command name is a function that is not a standard utility
> implemented as a function, variable assignments shall affect the current
> execution environment during the execution of the function. It is
> unspecified:
>
> * Whether or not the variable assignments persist after the
> completion of the function
>
> * Whether or not the variables gain the export attribute during
> the execution of the function
>
> * Whether or not export attributes gained as a result of the
> variable assignments persist after the completion of the function (if
> variable assignments persist after the completion of the function)"
POSIX used to require the current dash behaviour. However, you're
right that this is no longer the case.
This patch will remove the persistence of the variable assignment.
I have considered the exporting the variables during the function
execution but have decided against it because:
1) It makes the code bigger.
2) dash has never done this in the past.
3) You cannot use this portably anyway.
Reported-by: Dirk Fieldhouse <fieldhouse@gmx.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
evalcommand 1606 1635 +29
evalcase 313 317 +4
evalfun 280 268 -12
pushlocalvars 48 - -48
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 2/1 up/down: 33/-60) Total: -27 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Was printing initial "+" prefix for the assignment, that printing
"+ cmd"
then printing the expanded " v=VAL" string.
Delay printing of "+" prefix for the assignment to after expansion.
function old new delta
run_pipe 1883 1902 +19
builtin_eval 127 133 +6
expand_vars_to_list 1103 1106 +3
dump_cmd_in_x_mode 144 142 -2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/1 up/down: 28/-2) Total: 26 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The n > 0 check to prevent access to the last byte of non-existing argv[-1]
wasn't enough. Switched to making sure there are initialized (zero) bytes there.
A predictable testcase is rather hard to construct, unfortunately,
contents of memory depends on allocator behavior and whatnot.
function old new delta
o_save_ptr_helper 119 137 +18
expand_on_ifs 345 339 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-6) Total: 12 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This necessitates switch from libc FILE api to a simple
homegrown replacement.
The change which fixes the bug here is the deleting of
restore_redirected_FILEs();
line. It was prematurely moving (restoring) script fd#3.
The fix is: we don't even _want_ to restore scrit fds,
we are perfectly fine with them being moved.
The only reason we tried to restore them is that FILE api
did not allow moving of FILE->fd.
function old new delta
refill_HFILE_and_getc - 93 +93
hfopen - 90 +90
hfclose - 66 +66
pseudo_exec_argv 591 597 +6
hush_main 1089 1095 +6
builtin_source 209 214 +5
save_fd_on_redirect 197 200 +3
setup_redirects 320 321 +1
fgetc_interactive 235 236 +1
i_peek_and_eat_bkslash_nl 99 97 -2
expand_vars_to_list 1103 1100 -3
restore_redirects 99 52 -47
fclose_and_forget 57 - -57
remember_FILE 63 - -63
------------------------------------------------------------------------------
(add/remove: 3/2 grow/shrink: 6/3 up/down: 271/-172) Total: 99 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
o_free() made o_string NULL-initialized,
o_free_unsafe() did not bother reinitializing (expected caller to not need it).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This wasn't an ash bug in dollar_altvalue9, it was hush bug (and bash!)
function old new delta
expand_one_var 2236 2254 +18
expand_vars_to_list 1097 1103 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 24/0) Total: 24 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
