Commit Graph

2331 Commits

Author SHA1 Message Date
Denys Vlasenko
7eb8eecbbc ash: eval: Add assignment built-in support again
Upstream commit:

    Date: Sat, 19 May 2018 02:39:52 +0800
    eval: Add assignment built-in support again

    This patch adds assignment built-in support that used to exist
    in dash prior to 0.3.8-15.  This is because it will soon be part
    of POSIX, and the semantics are now much better defined.

    Recognition is done at execution time, so even "command -- export"
    or "var=export; command $var" should work.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-20 09:36:51 +01:00
Denys Vlasenko
c91950f315 ash,hush: testcase for "exit" without arguments in a trap
hush fails this one

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-19 12:10:41 +01:00
Denys Vlasenko
23bc562a05 ash,hush: add comment about masked SIGCHLD, handle SIG_IGNed SIGHUP as in bash
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-18 16:46:01 +01:00
Denys Vlasenko
47eb979404 ash: jobs: Only clear gotsigchld when waiting for everything
Upstream commit:

    Date: Sat, 19 May 2018 02:39:41 +0800
    jobs: Only clear gotsigchld when waiting for everything

    The gotsigchld flag is always cleared in dowait but not all callers
    of dowait will wait for everything.  In particular, when jp is set
    we only wait until the set job isn't running anymore.

    This patch fixes this by only clearing gotsigchld if jp is unset.
    It also changes the waitcmd to actually set jp which corresponds
    to the behaviour of bash/ksh93/mksh.

    The only other caller of dowait that doesn't wait for everything
    is the jobless reaper.  This is in fact redundant now that we wait
    after every simple command.  This patch removes it.

    Finally as every caller of dowait needs to wait until either the
    given job is not running, or until all terminated jobs have been
    processed, this patch moves the loop into dowait itself.

    Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-18 15:37:43 +01:00
Denys Vlasenko
97edfc42f1 ash: jobs - Do not block when waiting on SIGCHLD
Upstream comment:

    Date: Mon, 7 May 2018 00:40:34 +0800
    jobs - Do not block when waiting on SIGCHLD

    Because of the nature of SIGCHLD, the process may have already been
    waited on and therefore we must be prepared for the case that wait
    may block.  So ensure that it doesn't by using WNOHANG.

    Furthermore, multiple jobs may have exited when gotsigchld is set.
    Therefore we need to wait until there are no zombies left.

    Lastly, waitforjob needs to be called with interrupts off and
    the original patch broke that.

    Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

While at it, removed INT_ON/OFF in waitforjob() - it must be called
from INT_OFF region anyway.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-18 15:37:22 +01:00
Denys Vlasenko
d81af7216b ash: eval: Reap zombies after built-in commands and functions
Upstream commit:

    Date: Mon, 26 Mar 2018 23:55:50 +0800
    eval: Reap zombies after built-in commands and functions

    Currently dash does not reap dead children after built-in commands
    or functions.  This means that if you construct a loop consisting
    of solely built-in commands and functions, then zombies can hang
    around indefinitely.

    This patch fixes this by reaping when necessary after each built-in
    command and function.

    Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-18 14:28:30 +01:00
Denys Vlasenko
22c75924da ash: exec: Never rehash regular built-ins
Upstream commit:

    Date: Sat, 19 May 2018 02:39:51 +0800
    exec: Never rehash regular built-ins

    As regular (including special) built-ins can never be overridden,
    we should never remove them from the hash table.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17 16:20:05 +01:00
Denys Vlasenko
6c4f87e411 ash: exec: Stricter pathopt parsing
Upstream comment:

    Date: Sat, 19 May 2018 02:39:50 +0800
    exec: Stricter pathopt parsing

    This patch changes the parsing of pathopt.  First of all only
    %builtin and %func (with arbitrary suffixes) will be recognised.
    Any other pathopt will be treated as a normal directory.

    Furthermore, pathopt can now be specified before the directory,
    rather than after it.  In fact, a future version may remove support
    for pathopt suffixes.

    Wherever the pathopt is placed, an optional % may be placed after
    it to terminate the pathopt.

    This is so that it is less likely that a genuine directory containing
    a % sign is parsed as a pathopt.

    Users of padvance outside of exec.c have also been modified:

    1) cd(1) will always treat % characters as part of the path.
    2) chkmail will continue to accept arbitrary pathopt.
    3) find_dot_file will ignore the %builtin pathopt instead of trying
    to do a stat in the accompanying directory (which is usually the
    current directory).

    The patch also removes the clearcmdentry optimisation where we
    attempt to only partially flush the table where possible.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17 16:02:40 +01:00
Denys Vlasenko
b0d2dc7d62 ash: exec: Do not allocate stack string in padvance
Upstream commit:

    Date: Sat, 19 May 2018 02:39:48 +0800
    exec: Do not allocate stack string in padvance

    Many callers of padvance immediately free the allocated string
    so this patch moves the stalloc call to the caller.  Instead of
    returning the allocated string, padvance now returns the length
    to allocate (this may be longer than the actual string length,
    even including the NUL).  For the case where we would previously
    return NULL, we now return -1.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17 15:59:44 +01:00
Denys Vlasenko
c55847fedb ash: memalloc: Add growstackto helper
Upstream commit:

    Date: Sat, 19 May 2018 02:39:46 +0800
    memalloc: Add growstackto helper

    This patch adds the growstackto helper which repeatedly calls
    growstackblock until the requested size is reached.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17 15:59:08 +01:00
Denys Vlasenko
74aaf05170 ash: parser: Save/restore here-documents in command substitution
Upstream comment:

    Date: Sat, 19 May 2018 02:39:42 +0800
    parser: Save/restore here-documents in command substitution

    This patch changes the parsing of here-documents within command
    substitution, both old style and new style.  In particular, the
    original here-document list is saved upon the beginning of parsing
    command substitution and restored when exiting.

    This means that here-documents outside of command substitution
    can no longer be filled by text within it and vice-versa.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17 12:11:26 +01:00
Denys Vlasenko
afc91faedd ash: mkinit: Split reset into exitreset and reset
Upstream commit:

    Date: Sat, 19 May 2018 02:39:40 +0800
    mkinit: Split reset into exitreset and reset

    Previously reset was called after exitshell.  This was changed
    so that it was called before exitshell because certain state needed
    to be reset in order for the EXIT trap to work.

    However, this caused issues because certain other states (such
    as local variables) should not be reset.  This patch fixes this
    by creating a new function exitreset that is called prior to
    exitshell and moving reset back to its original location.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17 11:22:59 +01:00
Denys Vlasenko
9ee5892798 ash: expand: Fix trailing newlines processing in backquote expanding
Upstream commit:

    Date: Mon, 29 Apr 2019 19:13:37 +0500
    expand: Fix trailing newlines processing in backquote expanding

    According to POSIX.1-2008 we should remove newlines only at the end of
    the substitution. Newlines-only substitions causes dash to remove
    newlines before beggining of the substitution. The following code:

        cat <<END
        1
        $(echo "")
        2
        END

    prints "1<newline>2" instead of expected "1<newline><newline>2".

    This patch fixes trailing newlines processing in backquote expanding.

    Signed-off-by: Nikolai Merinov <n.merinov@inango-systems.com>
    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17 10:24:32 +01:00
Denys Vlasenko
c2ce888030 ash: parser: Only accept single-digit parameter expansion outside of braces
Upstream commit:

    Date: Mon, 27 May 2019 13:39:37 +0800
    parser: Only accept single-digit parameter expansion outside of braces

    This patch should fix the problem.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-17 10:15:35 +01:00
Denys Vlasenko
3f4847b6d9 ash: shell: Fix clang warnings about "string plus integer"
Upstream commit:

    Date: Sat, 15 Dec 2018 18:49:31 +0100
    shell: Fix clang warnings about "string plus integer"

    Building with clang results in some warnings about integer values being
    added to strings.

    While the code itself is fine and the warnings are indeed harmless,
    fixing them also makes the semantic more explicit: what it is actually
    being increased is the address which points to the start of the string
    in order to skip the initial character when some conditions are met.

    Signed-off-by: Antonio Ospite <ao2@ao2.it>
    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:29:31 +01:00
Denys Vlasenko
e368d851e7 ash: eval: Use the correct expansion mode for fd redirection
Upstream comment:

    Date: Mon, 19 Nov 2018 18:00:32 +0800
    eval: Use the correct expansion mode for fd redirection

    It has been reported that

            echo test >&$EMPTY_VARIABLE

    causes dash to segfault.  This is a symptom of the bigger problem
    that dash tries to perform pathname expansion as well as field
    splitting on the word after >& and <&.  This is wrong and this
    patch fixes it to use the same expansions as done on a normal
    redirection.

    Reported-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:24:33 +01:00
Denys Vlasenko
4ace385809 ash: expand: Fix skipping of command substitution when trimming in evalvar
Upstream commit:

    Date: Mon, 28 May 2018 17:09:48 +0800
    expand: Fix skipping of command substitution when trimming in evalvar

    When we are trimming an unset variable in evalvar, any embedded
    command substitution that should have been skipped are not.  This
    can cause them to be evaluated later should there be other command
    substitutions in the same input word.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:22:32 +01:00
Denys Vlasenko
226b8a143d ash: main: Print \n upon EOF (CTRL-D) when run interactively
Upstream comment:

    Date: Fri, 7 Sep 2018 10:34:14 +0200
    main: Print \n upon EOF (CTRL-D) when run interactively

    Exiting dash via a ^D instead of with "exit" causes dash to forget to
    print a newline.

        sh-3.1$ sh
        sh-3.1$ ^D
        sh-3.1$ dash
        $ sh-3.1$

    It is more neat and tidy to send a newline similarly to what bash does,
    so it doesn't make the next prompt of the parent shell look ugly.

    Suggested by jidanni.

    Signed-off-by: Gerrit Pape <pape@smarden.org>
    Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
    [reworded the patch description]
    Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
    Bug-Debian: http://bugs.debian.org/476422
    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:16:52 +01:00
Denys Vlasenko
e880b1fea8 ash: expand: Use HOME in tilde expansion when it is empty
Upstream commit:

    Date: Sun, 27 May 2018 17:31:57 +0800
    expand: Use HOME in tilde expansion when it is empty

    Currently if HOME is set to empty tilde expansion will fail, i.e.,
    it will remain as a literal tilde.  This patch changes it to
    return the empty string as required by POSIX.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:16:35 +01:00
Denys Vlasenko
a7b97e367c ash: builtin: Mark more regular built-ins
Upstream commit:

    Date: Sat, 19 May 2018 02:39:49 +0800
    builtin: Mark more regular built-ins

    This patch marks the following built-ins as regular, meaning that
    they cannot be overriden using PATH search:

            hash
            pwd
            type
            ulimit

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:14:45 +01:00
Denys Vlasenko
2bad3a305b ash: jobs: Replace some uses of fmtstr with stpcpy/stpncpy
Upstream commit:

    Date: Sat, 19 May 2018 02:39:45 +0800
    jobs: Replace some uses of fmtstr with stpcpy/stpncpy

    Some uses of fmtstr, particularly the ones without a format string,
    can be replaced with stpcpy or stpncpy.  This patch does that so
    we don't have to introduce unnecessary format strings in order to
    silence compiler warnings.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:14:45 +01:00
Denys Vlasenko
3f7fb2c89a ash: output: Fix fmtstr return value
Upstream commit:

    Date: Sat, 19 May 2018 02:39:44 +0800
    output: Fix fmtstr return value

    The function fmtstr is meant to return the actual length of output
    produced, rather than the untruncated length.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:14:45 +01:00
Denys Vlasenko
970470e235 ash: main: Only set savestatus in exitcmd
Upstream commit:

    Date: Sat, 19 May 2018 02:39:38 +0800
    main: Only set savestatus in exitcmd

    Currently exitcmd sets exitstatus and then savestatus if the latter
    was previously set.  In fact, as exitcmd always raises an exception
    and will either end up in the setjmp call in main() or exitshell(),
    where exitstatus is always replaced by savestatus if set, we only
    need to set savestatus.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:14:45 +01:00
Denys Vlasenko
4ccddc8fb3 ash: [BUILTIN] Exit without arguments in a trap should use status outside traps
Upstream commit:

    Date:   Mon Oct 6 10:39:47 2014 +0800
    [BUILTIN] Exit without arguments in a trap should use status outside traps

    POSIX now requires that exit without arguments in a trap should
    return the last command status prior to executing traps.  This
    patch implements this behaviour.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:14:45 +01:00
Denys Vlasenko
f7eea8c235 ash: parser: Fix incorrect eating of backslash newlines
Keeping up with upstream (in our case, 'before patch' code is not buggy).
Upstream commit:

    Date: Fri, 11 May 2018 23:41:25 +0800
    parser: Fix incorrect eating of backslash newlines

    With the introduction of synstack->syntax, a number of references
    to the syntax variable was missed during the conversion.  This
    causes backslash newlines to be incorrectly removed in single
    quote context.

    This patch also combines these calls into a new helper function
    pgetc_top.

    Fixes: ab1cecb40478 ("parser: Add syntax stack for recursive...")
    Reported-by: Leah Neukirchen <leah@vuxu.org>
    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:14:45 +01:00
Denys Vlasenko
acf79f9913 ash: use pgetc_eatbnl() in more places, take 2
Adding previously skipped "readtoken1(pgetc_eatbnl(), DQSYNTAX..." changes
from upstream commit:

    Date:   Thu Mar 8 08:37:11 2018 +0100
    Author: Harald van Dijk <harald@gigawatt.nl>
    parser: use pgetc_eatbnl() in more places

    dash has a pgetc_eatbnl function in parser.c which skips any
    backslash-newline combinations. It's not used everywhere it could be.
    There is also some duplicated backslash-newline handling elsewhere in
    parser.c. Replace most of the calls to pgetc() with calls to
    pgetc_eatbnl() and remove the duplicated backslash-newline handling.

    Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-02-16 19:14:45 +01:00
Ron Yorston
9e2a5668fd ash,hush: allow builtins to be tab-completed, closes 7532
function                                             old     new   delta
complete_cmd_dir_file                                678     830    +152
get_builtin_name                                       -      35     +35
optschanged                                          125     132      +7
hush_main                                           1069    1076      +7
save_command_ps_at_cur_history                        76      78      +2
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 4/0 up/down: 203/0)             Total: 203 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-01-29 15:23:17 +01:00
Ron Yorston
b0c711e64f ash: improve expandstr()
The dash maintainer recently posted a fix for issues with expanding
PS1.  These had already been fixed differently in BusyBox ash.  Borrow
a couple of improvements:

- Use a single call to setjmp() to trap errors in both readtoken1()
  and expandarg().

- In case of error set the prompt to the literal value of PS1 rather
  than the half-digested nonsense in stackblock() which might include
  ugly control characters.

function                                             old     new   delta
expandstr                                            353     300     -53

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2020-01-29 13:59:45 +01:00
Denys Vlasenko
259747caa7 hush: fix preprocessor directives indentation
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-11-28 10:28:14 +01:00
Denys Vlasenko
21806562ca hush: restore redirected stdin
function                                             old     new   delta
restore_redirects                                     52      95     +43
save_fd_on_redirect                                  243     253     +10
hfopen                                                90      99      +9
fgetc_interactive                                    259     261      +2
builtin_type                                         117     115      -2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/1 up/down: 64/-2)              Total: 62 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-11-01 14:16:07 +01:00
Denys Vlasenko
af7169b4a7 clang/llvm 9 fix - do not eliminate a store to a fake "const"
This is *much* better (9 kbytes better) than dropping "*const"
optimization trick.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-25 12:12:22 +02:00
Denys Vlasenko
7427406580 shell: better comments in BASE#nn code
function                                             old     new   delta
evaluate_string                                      932     930      -2

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-22 14:25:43 +02:00
Denys Vlasenko
3ef513e787 shell/ulimit: code shrink
text	   data	    bss	    dec	    hex	filename
1001949	    551	   5612	1008112	  f61f0	busybox_old
1001906	    551	   5612	1008069	  f61c5	busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-10-21 16:47:09 +02:00
Denys Vlasenko
c58d785b9d ash: fix BASE###nn bashism for bases 36..64
function                                             old     new   delta
evaluate_string                                      876     932     +56

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-22 23:40:10 +02:00
Denys Vlasenko
ca1ce4b9fa ash: fix BASE###nn bashism to accept letter 'digits' for bases > 9
function                                             old     new   delta
evaluate_string                                      873     876      +3

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-22 18:26:05 +02:00
Denys Vlasenko
35e349de3c ash: add a FIXME comment
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-05 14:31:49 +02:00
Denys Vlasenko
18a90ec846 hush: fix "set -o INVALID" affecting -e flag state
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-09-05 14:07:14 +02:00
Denys Vlasenko
2f9c124f7d ash: fix set -o to not show "nameless" options
Patch by Martijn Dekker <martijn@inlv.org>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-08-02 16:44:35 +02:00
Ron Yorston
943e81f5db ash: only catch unexpected exceptions in PS1 expansion
Commit d1a2fa2a4 (ash: catch error in arithmetic expansion in PS1)
catches all exceptions raised by expandarg().  Some exceptions, such as
the EXEXIT raised when command expansion is used, are expected:

   export PS1='$(echo "$ ")'

These should be processed normally or the shell hangs at the prompt.

function                                             old     new   delta
expandstr                                            344     353      +9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 9/0)                 Total: 9 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-31 13:44:32 +02:00
James Byrne
6937487be7 libbb: reduce the overhead of single parameter bb_error_msg() calls
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().

This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.

Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.

This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.

The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):

Arm:     -92 bytes
MIPS:    -52 bytes
PPC:   -1836 bytes
x86_64: -938 bytes

Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.

Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-07-02 11:35:03 +02:00
Denys Vlasenko
f3634584d0 ash,hush: show 'c' in $- if run in "sh -c CMD"
function                                             old     new   delta
options                                              552     599     +47
expand_one_var                                      2375    2385     +10
optletters_optnames                                   60      64      +4
hush_main                                           1108    1111      +3
ash_main                                            1150    1152      +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/0 up/down: 66/0)               Total: 66 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-06-03 12:21:04 +02:00
Denys Vlasenko
897475ab02 ash: allocate line editing structure only if needed
function                                             old     new   delta
optschanged                                           91     128     +37
historycmd                                            13      17      +4
setcmd                                                80      78      -2
ash_main                                            1167    1150     -17
options                                              576     552     -24
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 41/-43)             Total: -2 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-06-01 16:35:09 +02:00
Denys Vlasenko
8b35f207bb shell: move all definitions of strto_arith_t() together
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-26 14:02:10 +02:00
Denys Vlasenko
d8740b265a hush: show 's' in $-
function                                             old     new   delta
expand_one_var                                      2362    2375     +13
hush_main                                           1104    1108      +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 17/0)               Total: 17 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-19 19:11:21 +02:00
Denys Vlasenko
76a4e8361a hush: allocate line edit buffer only for interactive shell
function                                             old     new   delta
builtin_history                                       16      20      +4

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-19 18:24:52 +02:00
Denys Vlasenko
9edd268bad shell: implement optional "BASE#nnnn" numeric literals
function                                             old     new   delta
evaluate_string                                      729     851    +122

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-19 17:23:31 +02:00
Denys Vlasenko
30a4c32a4d hush: remove test for "echo ${-}" errorring out - now it works
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-19 16:35:56 +02:00
Denys Vlasenko
ef8985c688 hush: implement $-, set default PATH if it is not set on startup
function                                             old     new   delta
expand_one_var                                      2311    2362     +51
hush_main                                           1075    1104     +29
parse_dollar                                         790     791      +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 81/0)               Total: 81 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-19 16:29:09 +02:00
Denys Vlasenko
0c36019369 hush: set default PS1/2 only if we interactive
"env - hush SCRIPT" invocation (that is, with empty environment)
should not show PS1/2 in "set" output.

function                                             old     new   delta
hush_main                                           1070    1075      +5

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-19 15:39:32 +02:00
Denys Vlasenko
08fb82c80c hush: handle LINENO the same way as RANDOM: variable is "ephemeral"
"env - hush" invocation (that is, with empty environment)
should not show LINENO in "set" output.

function                                             old     new   delta
get_local_var_value                                  263     294     +31
hush_main                                           1105    1070     -35
handle_changed_special_names                          79      38     -41
run_pipe                                            1834    1765     -69
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 31/-145)          Total: -114 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2019-05-19 15:39:32 +02:00