Patch is based on work by tiggerswelt.net. They say:
"Using this patch it was no problem to acquire an IPv6-Address via DHCPv6
using ISC DHCPD6 on server-side."
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is the behaviour observed with standard vim and busybox vi of at
least 1.22.1. It was changed with commit "32afd3a vi: some
simplifications" which happened before 1.23.0.
Mistyping filename on command line happens fairly often and it's better
we restore the old behaviour to avoid a few unnecessary flash writes and
sometimes efforts of debugging bugs caused by those unneeded stray
files.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Busybox is very often used in initramfs at the end of which usually
there is a switch_root to the actual rootfs. There are many cases where
the console kernel argument is either just a placeholder (for example
RaspberryPi uses serial0 and serial1) or configured as null to avoid any
console messages - usually you would see such of a setup in production
environments.
Currently busybox bails out if can't open the console argument. If this
happenes in initramfs and if the console=null for example, you get in a
blind kernel panic. Avoid this by only warning instead of dying.
function old new delta
switch_root_main 371 368 -3
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This reverts commit 86a03bee1d.
Since now our "mount -oloop" creates AUTOCLEARed loopdevs, we no longer
need our umount to destroy loopdevs to match the usual util-linux behaviour.
Now this revert fixes another, opposite bug: "explicit" mount /dev/loopN
and then umount must not drop loopdevs!
User complaint is as follows:
It seems LOOP_CLR_FD called on a loop-*partition* removes the mapping of
the whole *device* - which results in the following:
root@LEDE:/# loop=$(losetup -f)
root@LEDE:/# echo ${loop}
/dev/loop2
root@LEDE:/# losetup ${loop} /IMAGE
root@LEDE:/# ls -l ${loop}*
brw------- 1 root root 7, 2 Mar 6 20:09 /dev/loop2
root@LEDE:/# partprobe ${loop}
root@LEDE:/# ls -l ${loop}*
brw------- 1 root root 7, 2 Mar 6 20:09 /dev/loop2
brw------- 1 root root 259, 8 Mar 6 21:59 /dev/loop2p1
brw------- 1 root root 259, 9 Mar 6 21:59 /dev/loop2p2
brw------- 1 root root 259, 10 Mar 6 21:59 /dev/loop2p3
brw------- 1 root root 259, 11 Mar 6 21:59 /dev/loop2p4
brw------- 1 root root 259, 12 Mar 6 21:59 /dev/loop2p5
brw------- 1 root root 259, 13 Mar 6 21:59 /dev/loop2p6
brw------- 1 root root 259, 14 Mar 6 21:59 /dev/loop2p7
brw------- 1 root root 259, 15 Mar 6 21:59 /dev/loop2p8
root@LEDE:/# mount ${loop}p8 /MOUNT # mount loop partition
root@LEDE:/# losetup -a | grep $loop # loop dev mapping still there
/dev/loop2: 0 /mnt/IMAGE
root@LEDE:/# strace umount /MOUNT 2> /log # unmount loop partition
root@LEDE:/# losetup -a | grep ${loop} # loop device mapping is gone
root@LEDE:/# grep -i loop /log
open("/dev/loop2p7", O_RDONLY|O_LARGEFILE) = 3
ioctl(3, LOOP_CLR_FD) = 0
root@LEDE:/#
The strace was done to figure out, if maybe umount wrongly ioctl()'s the
parent device instead of the partition - it doesn't.
I already wasn't a fan of umount implicitly removing the mapping in the
first place (as I usually setup and release loop devices with `losetup`
and scripts needed to call umount differently in order to work and
outside busybox).
However taking above (kernel-)behaviour into account - umount calling
ioctl(LOOP_CLR_FD) unconditionally potentially causes some nasty side
effects
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The "autolooped" mount (mount [-oloop] IMAGE /DIR/DIR)
always creates AUTOCLEARed loopdevs, so that umounting
drops them (and this does not require any code in the
umount userspace).
This happens since circa linux-2.6.25:
commit 96c5865559cee0f9cbc5173f3c949f6ce3525581
Date: Wed Feb 6 01:36:27 2008 -0800
Subject: Allow auto-destruction of loop devices
IOW: in this case, umount does not have to use -d
to drop the loopdev.
The explicit loop mount (mount /dev/loopN /DIR/DIR)
does not do this. In this case, umount without -d
should not drop loopdev.
Unfortunately, bbox umount currently always implies -d,
this probably needs fixing.
function old new delta
set_loop 537 597 +60
singlemount 1101 1138 +37
losetup_main 419 432 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 110/0) Total: 110 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
busybox's chpst first switches user/group and then tries to call nice().
Once the root priviledges are dropped, process priority can only be lowered.
So negative nice values don't work anymore.
Upstream version of chpst correctly calls nice() before switching user.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Along with it, there are other changes
- Check for uppercase X is removed as the expression will be always false and
:X itself is another totally different command in standard vim
- The status line will show number of written lines instead of lines requested
by the colon command. This is also how the standard vim is doing, though
the difference is that '!' has to be explicitly specified in vim to allow
partial writes
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
... when gzip is selected but not gunzip nor zcat, or when bzip2 is
selected but not bunzip2 nor bzcat.
This regression is introduced in b130f9f758
("Allow 'gzip -d' and 'bzip2 -d' without gunzip or bunzip2")
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
- modprobe can indirectly benefit from FEATURE_2_4_MODULES and
FEATURE_INSMOD_TRY_MAP options.
- The position of config FEATURE_INSMOD_TRY_MMAP prevented some other
config options from indenting under FEATURE_2_4_MODULES. Reorder to
fix this.
- FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is now moved to
Config.src under "Common options" section. (I wished to edit this
config so that it also work with "big" modutils, but it's not done at
the moment. Sorry.)
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
- The modprobe-small implementation of rmmod no longer chdir's to
"/lib/modules/`uname -r`" as it was not necessary for rmmod's
operation. (And it no longer need to die if such modules directory
doesn't exist.)
- Configs DEFAULT_MODULES_DIR and DEFAULT_DEPMOD_FILE no longer depend
on MODPROBE_SMALL as the latter may not enable depmod or modprobe
that requires these configs.
- Clarify DEFAULT_DEPMOD_FILE's description regarding the ".bb" name
suffix.
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
An example of such an error (should be compiled with DEBUG_SANITIZE):
runtime error: left shift of 1 by 31 places cannot be represented in
type 'int'
Signed-off-by: Rostislav Skudnov <rostislav@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Allow module options on command line to be disabled on "big" modutils.
Config FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is renamed to
FEATURE_CMDLINE_MODULE_OPTIONS and no longer depends on !MODPROBE_SMALL
(I'm not sure if disabling this is useful on "big" modutils, but at
least the macro can serve as a marker and ensure both implementations
of same feature have consistent behavior.)
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It is enough to have only applets' configs select PLATFORM_LINUX.
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Having lsmod code inside modprobe_main() makes some of the applet name
checking code awkward. Besides, this make busybox x86_64 binary a few
bytes smaller. :)
function old new delta
lsmod_main - 23 +23
modprobe_main 599 564 -35
-------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 23/-35) Total: -12 bytes
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When using musl libc glob() a very long string can cause glob() to fail,
which leads to an out of memory error being raised by ash.
This can happen easily if a very long quoted string contains *, even
though no glob expansion should ever be performed on it (since it's
quoted).
Fix this by properly parsing control characters and escaping and only
accept unquoted metacharacters. While we're at it, unify this check for
libc and built-in glob expansion
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
module.aliases and module.symbols files have no use in modprobe-small
implementation. So FEATURE_MODUTILS_ALIAS and FEATURE_MODUTILS_SYMBOLS
will depend on !MODPROBE_SMALL.
The try_to_mmap_module() function is not called in modprobe-small.c,
so I will let FEATURE_INSMOD_TRY_MMAP depend on !MODPROBE_SMALL for
now.
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Likewise, FEATURE_2_4_MODULES is not used by modprobe-small.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We were strdup'ing "Cookie: foo" every time we saw it.
function old new delta
handle_incoming_and_exit 2733 2821 +88
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
