Run the namelookup from the main loop so a misspelled first ntp server
name does not block everything forever.
This fixes the following situation which would block forever:
$ sudo ./busybox ntpd -dn -p foobar -p pool.ntp.org
ntpd: bad address 'foobar'
ntpd: bad address 'foobar'
ntpd: bad address 'foobar'
...
New behavior:
ntpd: bad address 'foobar'
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.009775 delay:0.175550 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x01
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.009605 delay:0.175461 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x03
ntpd: sending query to 137.190.2.4
ntpd: reply from 137.190.2.4: offset:-1.005327 delay:0.167027 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x07
ntpd: sending query to 137.190.2.4
ntpd: bad address 'foobar'
ntpd: reply from 137.190.2.4: offset:-1.046349 delay:0.248705 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x0f
This patch is based on Kaarle Ritvanens work.
http://lists.busybox.net/pipermail/busybox/2016-May/084197.html
function old new delta
ntpd_main 1061 1079 +18
ntp_init 556 560 +4
resolve_peer_hostname 81 75 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 22/-6) Total: 16 bytes
Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
archival/unzip.c: In function 'read_next_cdf':
archival/unzip.c:271:8: warning: variable 'org' set but
not used [-Wunused-but-set-variable]
off_t org;
^~~
Signed-off-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 3a45b87ac3 (modutils: support finit_module syscall) introduced
macro finit_module. But it is not defined for uClibc.
The compilation for busybox fails for MIPS with:
With uClibc, we get following build errors:
modutils/lib.a(modutils.o): In function `bb_init_module':
modutils.c:(.text.bb_init_module+0x94): undefined reference to `finit_module'
modutils.c:(.text.bb_init_module+0xa0): undefined reference to `finit_module'
We can just use syscall() without any need for the
uClibc wrappers.
Newer versions of uClibc-ng (>1.0.20) will remove the
module syscall wrappers.
Found via Buildroot autobuilders:
http://autobuild.buildroot.net/results/556/55655daef23788fb3967f801ec8b79e9bed7122b/build-end.log
function old new delta
bb_delete_module 26 32 +6
bb_init_module 90 95 +5
delete_module 37 - -37
init_module 53 - -53
------------------------------------------------------------------------------
(add/remove: 0/4 grow/shrink: 2/0 up/down: 11/-90) Total: -79 bytes
Reported-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Mention the behavior if user selects CONFIG_SH_IS_ASH but not
CONFIG_ASH. We will be explicit that invocations like "busybox ash"
will not work for such configuration.
Also clarify help text of CONFIG_BASH_IS_* that bash compatibility in
ash is not complete. (It shouldn't be anyway - ash can't support every
bash quirk out there.)
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
All other applets are listed simply by their name, no reason why
dumpleases doesn't do that.
Group all udhcpd feature options directly after it.
Put "NOT READY" into udhcpc6 item (some users actually tried to use it,
and complained).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit a8c696bf09 makes ifup and ifdown
individually selectable, but forgets to update the dependency to
IFUPDOWN_UDHCPC_CMD_OPTIONS, so it is not selectable anymore.
This patch fixes the dependency by checking for IFUP or IFDOWN, instead
of the obsolete IFUPDOWN.
Also, it drops dependency on UDHCPC: udhcpc on the target system
does not have to come from the _same_ binary.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
libbb/appletlib.c:558:12: warning: 'ingroup' defined but
not used [-Wunused-function]
static int ingroup(uid_t u, gid_t g)
^~~~~~~
That function is used only if FEATURE_SUID_CONFIG is also enabled.
Signed-off-by: Cristian Ionescu-Idbohrn <cristian.ionescu-idbohrn@axis.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The commit 'ash,hush: set exit code 127 in "sh /does/not/exist" case'
only partly implemented the dash commit '[ERROR] Allow the originator
of EXERROR to set the exit status'. This resulted in incorrect error
codes for a syntax error:
$ )
$ echo $?
0
or a redirection error for a special builtin:
$ rm -f xxx
$ eval cat <xxx
$ echo $?
0
Signed-off-by: Ron Yorston <rmy@pobox.com>
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
musl does not like including linux/netfilter_ipv4.h
(enum / #define collision in two headers, resulting in "3 = 3"
type situation in enum definition).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Well, in fact it works (make oldconfig throws only a warning when it sees
both SH_IS_HUSH=y and SH_IS_NONE=y), but let's be nice.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The same can be done for msh, but we are probably better off just deleting it
in a next versio or two.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
They merely enable ip or ifconfig/route. There is already a way to do this
on the same menuconfig page.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Linux kernel, starting from 2.6.19 allows ip table ids to have 32-bit values.
In order to preserve compatibility, the old 8-bit field: rtm_table is still
in use when table id is lower than 256.
Add support for the 32-bit table id (RTA_TABLE attribute) in:
- ip route print
- ip route modify
- ip rule print
- ip rule modify
Add printing of table ids to ip route.
Changes are compatible with the mainline iproute2 utilities.
These changes are required for compatibility with ConnMan, which by default
uses table ids greater than 255.
function old new delta
print_route 1588 1637 +49
do_iproute 2187 2222 +35
do_iprule 955 987 +32
print_rule 617 630 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 129/0) Total: 129 bytes
Signed-off-by: Lukasz Nowak <lnowak@tycoint.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The selinux guys want you to get class values at runtime by converting
textual names into constants. Drop the deprecated headers and switch
to the new format.
This API has been around for years, so there shouldn't be an issue
with backwards compatibility.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Commit 47cfbf32fd ("*: add most of the
required setup_common_bufsiz() calls") switched this tool over to use
the common_bufsiz logic but missed including the header leading to a
build failure when enabled:
selinux/setfiles.c:80:30: error: 'bb_common_bufsiz1' undeclared (first use in this function)
URL: https://bugs.gentoo.org/600106
Reported-by: Jonas Jelten <jj@stusta.net>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The kernel broke the name years ago, but didn't notice until it was much
too late. Rename the node to match expectations of userland software,
and what the kernel itself documents in its Kconfig help:
This provides a device that's usually called /dev/hwrng, ...
URL: https://marc.info/?l=linux-crypto-vger&m=144249767024990&w=2
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
