some flash partitions can be smaller than the existing BUFSIZE thus write
BUFSIZE will fail with "no space left on device"
Signed-off-by: Jacob Kjaergaard <jacob.kjaergaard@prevas.dk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Busybox already uses sendfile in httpd. This patch proposes to use it
globally to copy data between file descriptors.
It speeds up the copying on slow systems a lot - below are the times needed
to copy a 450Mb file with and without this option enabled on a BeagleBone
Black:
sendfile:
user 0m0.000s
sys 0m8.170s
read/write 4k:
user 0m0.470s
sys 0m16.300s
function old new delta
bb_full_fd_action 394 474 +80
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Sometimes ARG_MAX is small (like 32k) yet sysconf(_SC_ARG_MAX)
is big, and people prefer using the bigger value.
OTOH, with sufficiently large ARG_MAX, further wins from
sysconf(_SC_ARG_MAX) being bigger are exponentially smaller:
you can see 4 times fewer fork+execs when you run find, but
when each execed process already takes a thousand parameters
it's likely execution time is dominated by what that process
does with each parameter.
Thus, with this change ARG_MAX is used if it's sufficiently big,
otherwise sysconf(_SC_ARG_MAX) is used.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
169.254 may already be used by a local network. This patch allows
specifying your own IP range.
Our particular use case is a mesh network, in which the nodes partaking
were using an IP range specifically assigned for the meshing purpose.
As the LAN side of the mesh node could use 169.254, this default range
was not an option.
function old new delta
zcip_main 1342 1426 +84
pick_nip - 40 +40
packed_usage 29974 29969 -5
pick 34 - -34
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 1/1 up/down: 124/-39) Total: 85 bytes
Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some clients have a very short timeout for sending the DHCP
DISCOVER, shorter than the arpping timeout of 2000 milliseconds
that udhcpd uses by default.
This patch allows tweaking the timeout, or disabling of arpping
altogether, at the risk of handing out addresses which are
already in use.
function old new delta
udhcpd_main 1460 1501 +41
udhcpc_main 2814 2851 +37
packed_usage 29957 29974 +17
arpping 477 493 +16
find_free_or_expired_nip 161 174 +13
send_offer 285 292 +7
nobody_responds_to_arp 85 89 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 7/0 up/down: 135/0) Total: 135 bytes
Signed-off-by: Michel Stam <m.stam@fugro.nl>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The offset to jitter ratio is now calculated before updating
jitter to make the test more sensitive.
function old new delta
ntp_init 460 474 +14
update_local_clock 752 764 +12
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 26/0) Total: 26 bytes
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
To avoid polling servers frequently slowly increase the interval up
to BIGPOLL when
- no replies are received from a peer
- no source can be selected
- peer claims to be unsynchronized (e.g. we are polling it too
frequently)
When recv() returns with an error, drop code to try to continue
on network errors: I'm not convinced those cases happen in real life.
function old new delta
recv_and_process_peer_pkt 919 838 -81
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
* on step, poll interval drops to 8.5 mins instead of 32 seconds
* on total loss of all replies (no replies from any peer
for last 8 requests), also drop poll interval to 8.5 mins
instead of 32 seconds
* on send abd recv errors, RETRY_INTERVAL is now 32 seconds,
not 5 seconds
* on timing out listening to reply, instead of unconditional
shortening poll interval by x4, clamp it to NOREPLY_INTERVAL
(512 seconds)
* if a largish offset is seen, clamp nexp poll interval
to 128 seconds, not 64 seconds
function old new delta
clamp_pollexp_and_set_MAXSTRAT - 37 +37
recv_and_process_peer_pkt 861 869 +8
poll_interval 52 48 -4
update_local_clock 762 752 -10
ntpd_main 1063 1050 -13
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/3 up/down: 45/-27) Total: 18 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The burst mode needs to be stopped even when no replies are received.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some packages want to install themselves using "-t" to specify
the directory (as supported by GNU coreutils). Add support for the option
for compatibility reasons.
function old new delta
install_longopts 76 95 +19
install_main 769 777 +8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 27/0) Total: 27 bytes
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
buffer_print 71 104 +33
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This makes "G" (goto end of input) command work as well as
/search_for_nonexistent_string: both will read to EOF now
even from somewhat slow input (such as kernel's "git log").
function old new delta
ndelay_on 35 43 +8
ndelay_off 35 43 +8
read_lines 695 691 -4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 16/-4) Total: 12 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While at it, fix brace matching to actually show the match
(missed fflush was causing cursor positioning to be buffered);
shorten brace matching code; remove unused macro indirection
in indicate_error().
Custom linker script 'busybox_ldscript' found, using it
function old new delta
indicate_error - 61 +61
mysleep 43 56 +13
char_insert 483 486 +3
find_pair 167 124 -43
Indicate_Error 61 - -61
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 2/1 up/down: 77/-104) Total: -27 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It used to be aliased to !FEATURE_SH_EXTRA_QUIET for ash,
while hush had it separate from FEATURE_SH_EXTRA_QUIET.
Bring ash in line with hush.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some HP PA-RISC firmware always sends fixed 512-byte requests,
with trailing garbage.
function old new delta
tftpd_main 578 572 -6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
